Samsung Electronics Co DVDVR300 DVD Recorder/ Video Cassette Recorder User Manual 2
Samsung Electronics Co Ltd DVD Recorder/ Video Cassette Recorder Users Manual 2
Contents
- 1. Users Manual 1
- 2. Users Manual 2
Users Manual 2
System Setup
System Setup - 4342 - System Setup
System Setup
n
:
:
:
Select “Tape Length”
Press the RIGHT button to select the Tape
Length. This information is usually printed
on the tape box. The menu cycles through:
T-120, T-160 or T-180.
Once the type of cassette is set, the VCR can
display the amount of time remaining on
the tape when you press the INFO. button.
4
n
:
:
:
Select “Auto Play”
Move the selection bar to “Auto Play,” then
press right button to select from the follow-
ing options:
• On - The VCR will automatically begin
playing a video tape when it is insert-
ed, as long as the safety tab of the
cassette has been removed.
• Off - Auto play is disabled.
5
n
:
:
:
Select “Auto Repeat”
Move the selection bar to “ Auto Repeat”. It
sets the VCR to play a tape repeatedly
[unless a tape control is activated (stop, fast
forward or rewind).
6
VCR Setting
T-120
T-160
T-180
Select “VCR”
Using the Up/Down buttons, move the
selection bar to “VCR” then press ENTER to
select.
3
On
Off
Off
On
VCR Setting
If you want your videotapes to play automatically
when you insert them, turn on Auto Play.
Open “MENU”
With the VCR in Stop or Play mode, press
the MENU button.
1
Select “System”
Use the UP/DOWN buttons to highlight
“System” then press the ENTER button.
2
RF output Channel
Select “RF Output Channel”
Move the selection bar to “RF output
Channel”, then press right to change.
4
Change “RF Output CH”
Select 3 ch or 4 ch.
Then press ENTER to change.
5
Change “TV Channel”
A message will appear on your TV. When
the message disappears, change your TV to
channel 3 or 4 to match the RF output
channel of the player.
6
Only tapes that are missing the Record
Safety Tab will play automatically when
inserted.
Note
RF Output Channel
44 - System Setup
System Setup
Plyingback
Playback - 45
Front Display
You can set the Front Panel Display to be bright all
the time, dim all the time, dim during power off.
Open “ MENU”
With the DVD in Stop or Play mode, press
the MENU button. .
1
Select “Setup”
Using the UP/DOWN buttons, move the
selection bar to “Setup” then press ENTER
to select.
2
Select “System ”
Using the UP/DOWN buttons, move the
selection bar to “System ” then press
ENTER to select.
3
Video Input
If you watch video through Line 2, you can choose
composite video or super video.
Open “MENU”
With the DVD Recorder-VCR in stop or play
mode, press the MENU button.
1
Select “Setup”
Using the UP/DOWN buttons, move the
selection bar to “Setup” then press ENTER
to select.
2
Select “System”
Using the Up/Down buttons to highlight
“System” then press the ENTER button.
3
Select “Video Input”
Use the UP/DOWN buttons to highlight
“Video Input”, then press ENTER button
and choose line 2 (composite) or S-Video.
4
Playback
Playback - 47
For DVD-VIDEO disc
For DVD-RAM/DVD-RW disc
Using the Disc and
Title Menu
Press the DISC MENU button to enter the
disc menu of the disc.
• Move to the setup menu related to play-
back operation.
• You can select audio language and subtitle
and so on provided by the disc.
1
Press the TITLE LIST button to display title
list.
1
Press the PLAY LIST button to display play
list.
2
Press the TITLE MENU button to move to
the title menu of the disc.
• Use this button if the disc contains more
than one title. Some type of discs may not
support the title menu functionality.
2
Some type of discs contains a dedicated menu sys-
tem that allows you to select special functions for
title, chapter, audio track, subtitle, film preview,
information on characters, etc.
Searching through a Chapter or
Track
Using the Search &
Skip Functions
During play, press the SEARCH ➛➛ or ❿❿ but-
ton on the remote control.
• You can scan the program in the reverse order.
To return to normal speed playback, press the ❿II
button.
DVD-VIDEO/
❿❿
Fast X 2
❿❿
Fast X 4
DVD-RAM/DVD-RW
❿❿
Fast X 8
❿❿
Fast X 16
DVD-R
❿❿
Fast X 32
❿❿
Fast X 128
AUDIO CD(CDDA)
❿❿
Fast X 2
❿❿
Fast X 4
❿❿
Fast X 8
Follow these directions to playback an entry from
the Movie List.
Skipping Chapters or Tracks
During play, press the l
➛➛
or
❿❿
lbutton on the
remote control.
• If you press the l
➛➛
button
If you press the l
➛➛
button, it moves to the
beginning of the chapter or track. Pressing the
button once again within 3 seconds returns to
the beginning of the previous chapter or
track.
• If you press the
❿❿
lbutton
If you press the
❿❿
lbutton, it moves to the
next chapter or track.
46 - Playback
Playback
Front Display
Set “Front Display”
Move the selection bar to “Front Display,”
then press RIGHT button to select from the
following options:
• Auto dim – Front Panel Display will dim
automatically during power
off.
• Bright – Front Panel Display will be bright
all the time.
• Dim – Front Panel Display will be dim all
the time.
4
Playing a Disc
Press the OPEN/CLOSE button.
• The STANDBY indicator light goes out
and the tray opens.
1
Place a disc gently into the tray with the
disc’s label facing up.
• For DVD-RAM discs, insert printed side
facing up.
2
Press the PLAY/PAUSE button or
OPEN/CLOSE button to close the disc tray.
• Your DVD Recorder-VCR close the disc
tray and playback the disc automatically.
• If you insert common audio CD (CDDA)
or data CD of MP3 files, your DVD
Recorder-VCR will display the file list on
the screen and playback the songs auto-
matically.
3
Press the STOP button during play
4
Auto dim
Bright
Dim
Your DVD Recorder-VCR memorize the
stop position when you stop playback,
and resume playback from the memorized
position when you press the PLAY button
again. (Except that you have removed the
disc, pressed the STOP button twice, or
urned off the power.). This function is
applicable for DVD-VIDEO, DVD-RAM,
DVD-RW or audio CD (CDDA) only.
Press the ❿❙button to hear the next song
in the playlist when playing back an audio
CD or MP3 disc.
If the disc contains a folder(s), select the
desired folder and press the ENTER but-
ton to view the files.
Note
Playback
Playback - 4948 - Playback
Playback
Using Repeat Play
(For DVD-VIDEO/DVD-
RAM/DVD-RW/DVD-R)
(DVD-RAM doesn’t support chapter repeat.)
Repeat Play
DVD-R(V)
DVD-R
What’s track?
It is the base unit to divide the content of
an Audio CD (CDDA) and MP3 disc. It
sometimes indicates a song.
What’s chapter?
A title on a DVD disc is usually divided
into chapters.
What’s title?
A title means usually a film contained on
a DVD disc.
Press ANYNEY button again to return
main screen.
Note
Press the ANY KEY button.
1
Use ❷buttons to select Repeat and use ❿
button to select the Title, Chapter or A-B
you want to play repeatedly.
2
Press ENTER button.
Repeat play allows you to repeat a track,
title or the entire disc.
• To make the screen disappear, press the
ANYKEY or RETURN button
3
Slow Motion Play/
Step Motion Play
Slow Motion Play
(DVD-VIDEO/DVD-RAM/
DVD-RW/DVD-R)
During pause mode, press the SEARCH ➛➛ or
❿❿ button on the remote for more than 1 sec-
ond.
• Each time you press the ❿❿ button :
❿❿ Slow X 1/8
❿❿Slow X 1/4
❿❿Slow X
1/2
• Each time you press the ➛➛ button :
➛➛ Slow X 1/8
➛➛ Slow X 1/4
➛➛ Slow X
1/2
To return to normal speed playback, press the ❿❿II button.
Step Motion Play
(DVD-VIDEO/DVD-RAM/
DVD-RW/DVD-R)
During pause mode, press the F.ADV button on
the remote.
• Each time the button is pressed, a new frame
will appear.
To return to normal speed playback, press the
❿
button.
No sound is heard during STEP or SLOW
mode.
Note
About ANYKEY
Displays a variety of information depending on the
disc itself. It may not work for some discs. (Audio
CD (CDDA) and MP3 discs do not support infor-
mation display.
Press the ANYKEY button on the remote control
during playback.
DVD-VIDEO
Title/Chapter/Time/Subtitle/Audio/Repeat/Angle
/Zoom
DVD-RAM/DVD-RW
Title/Time/Subtitle/Audio/Repeat/Zoom
Playback
Playback - 5150 - Playback
Playback
Moving to a scene
directly
Use ❷ to to select the Title, Chapter or
Track you want to find the desired scene.
2
If you want to select a title or chapter, select
it using the ➛❿ buttons. Then, press the
ENTER button.
• You can enter the desired time directly
using the numeric buttons.
3
Press the ANY KEY button.
1
If you want to move to a desired time, enter
the time in the sequence of hour, minute,
and second using the numeric buttons and
then press the ENTER button.
4
You can find the desired scene easily using the
ANYKEY function.
Using Repeat Play
(For Audio CD/MP3)
Repeat Play
Press the ANYKEY button. Highlight is
selected on Repeat.
1
Press ENTER button.
2
Press the ❷ button to select the Track or
Disc you want to playback repeatedly. For
MP3 disc, you can select Track, Folder or
Disc.
3
Press ENTER button.
Repeat play allows you to repeat a track,
folder or the entire disc.
4
For DVD-VIDEO/DVD-RAM/
DVD-RW/DVD-R
To return to normal playback
Using the A-B Repeat
Function
Press the ANYKEY button.
1
Use ❷ to select Repeat and use ❿button
to select the A-B.
2
Press ENTER button.
3
Select Off on the Repeat item
1
Press the ENTER button at the point where
you want the repeat play to start (A) and
then press the ENTER button at the point
where you want the repeat play to Stop (B).
• Your DVD Recorder-VCR will playback
the selected section repeatedly.
4
Playback
Playback - 5352 - Playback
Playback
Selecting the subtitle lan-
guage
Press the ANY KEY button.
1
Use ❷ to select Angle and use ➛❿ but-
ton to select the desired audio language.
2
When a DVD contains multiple angles of a particu-
lar scene, you can select the Angle function.
Changing the camera
angle
Setting a book mark
Using the Bookmark
Press the ANY KEY button.
1
Set marks at scenes you want to see again so that
you can start playback from the marked position
whenever you want.
Press the ENTER button when the desired
scene appears.
• The number 1 is displayed and the scene
is memorized.
2
Press the ENTER button again when the
desired scene appears.
• The number 2 is displayed and the scene
is memorized. Repeat above to bookmark
other positions. You can bookmark up to
10 scenes.
4
Press ❿button to move to the next posi-
tion..
3
This function is disc-dependent, and may
not work with all DVDs. This function
does not work when a DVD has not been
recorded with a multi-camera angle sys-
tem.
Note
Selecting the subtitle lan-
guage
Selecting the subtitle &
audio language
Press the ANY KEY button.
1
Audio languages and subtitle languages may not
work depending on disc type.
It is available during playback only.
Use ❷ to select Subtitle and use ➛❿ but-
ton to select the desired subtitle language.
• If a disc contains subtitles, you can select a
desired subtitle language, such as KOR
(Korean), ENG (English), JPN (Japanese),
by pressing the ➛❿ buttons.
• Subtitle display may be different depend-
ing on disc type.
• Subtitles are displayed overlapped. Disable
the caption function on your TV.
• Some discs allow you to select languages
from the disc menu only.
2
Selecting the Audio language
Press the ANYKEY button
1
Use ❷ to select Audio and use ➛❿ but-
ton to select the desired audio language.
• Audio languages may be different because
they are disc-specific.
• Some discs allow you to select languages
from the disc menu only.
2
Playback
Playback - 5554 - Playback
Playback
To return to the normal size, press the
ENTER button repeatedly until the screen
becomes of normal size.
5
Playing Back an Audio
CD (CDDA)
Press ❷ buttons to select the track (song)
to start playback from, and then press the
ENTER button.
• You can also select the track (song) by
pressing the numeric buttons on the
remote.
2
Insert an audio CD (CDDA) into the disc
tray.
• The audio CD menu appears and the
tracks (songs) are played back.
1
Anykay
Each disc has a variety of menu functions available.
Audio CD (CDDA) Screen
Elements
❷ : Select a track (song).
1
❿: Playback the selected track (song).
2
(
❿❿
l) button: Playback the next track.
4
Press and hold on the (➛➛/ ❿❿) button:
Fast Play (X2, X4, X8)
6
(l
➛➛
) button: Returns to the beginning of
thecurrent track when pressed
during played. If it is pressed
again, your DVD Recorder-
VCR moves to the previous
track and play it.
If you press this button within
three seconds after playback
starts, a track previous to a
current track will be played. If
you press this button after
three seconds lapse since play-
back started, the current track
will be replayed from the
beginning.
5
ENTER ( ) button: Playback the selected
track (song).
3
Using the Bookmark Zooming-In
To use Bookmark function, press the
MARKER button and ➛❿ button to select a
marked scene. Press the ENTER button to
start playing from the selected scene.
4
• Up to 99 scenes can be bookmarked.
• If you press the ENTER button during playback,
bookmarks are saved in the order of titles.
Bookmaking with DVD-RAM
disc
Clearing a Bookmark
Press the MARKER button.
1
CLEAR
12
PLAY
Press the ANY KEY button.
1
Use ❷ buttons to select Zoom, and then
press the ENTER button.
• will be displayed.
2
Press ➛❿ buttons to select a marked scene
you want to delete.
2
Press Clear button to delete the selected
bookmark.
3
Press ❷➛❿ buttons to move to the area
you want to enlarge.
3
Press the ENTER button.
• The screen will be enlarged to twice the
normal size.
• If you press the ENTER button again after
the screen was enlarged to twice the nor-
mal size, the screen size will be enlarged to
four times the normal size.
4
DVD-VIDEO/ normal size
2X
4X
2X
DVD-RAM/DVD-RW/
normal size
DVD-R
Playback
Playback - 5756 - Playback
Playback
Press ANY KEY during Play to move a high-
light to Repeat Mode. Press ENTER when
Repeat Mode is highlighted.
• A screen allowing you to change the
repeat mode (Off, Disc, Track) will appear.
• The repeat mode is changed every time
you press the REPEAT button on the
remote control.
1
Repeat
Off
To change repeat mode
Photo CD Playback
Insert a photo CD (JPEG) into the disc tray.
1
The screen shown below will appear auto-
matically. (Press ❿II button to switch to
slide show mode.)
2
Select Photo using ❷ buttons, then press
the ENTER button.
3
Use the ❷ buttons to select a photo file in
clips menu and then press the ENTER but-
ton.
: Returns to the Album screen.
: The unit enters slide show mode.
Before the slide show can begin, the
photo interval (slide show speed)
must be set
: Each time ENTER button is
pressed,the photo is enlarged up to
4X.
(Normal
2X
4X
2X
Normal)
: Each title the ENTER button is
speed, the picture rotates 90 degree
clockwise.
To see the next 6 pictures, press the
❿❿
lbutton.
To see the previous 6 pictures, press the l
➛➛
button.
Before the slide show begin, the picture interval
must be set.
4
Play Option Mode
Press the ANY KEY button.Repeat Mode
will be highlighted.
• Repeat mode is displayed during disc play.
• Play option is displayed in stop mode.
1
01/12
RETURN
CD
03_L.I.E 00 :52
Anykay
Music
01. TRACK 1
02. TRACK 2
03. TRACK 3
04. TRACK 4
05. TRACK 5
06. TRACK 6
4:39
4:31
4:30
3:53
4:23
4:24
Select Play Option Mode using the ❷ but-
tons and press the ENTER button.
• The play option screen will appear.
2
Select a desired play option using the ❷
buttons.
• Normal :
Tracks on a disc are played in the order in
which they were recorded on the disc.
• Random :
The Random option plays a disc’s tracks
and played completely, another random
list is generated and played. Random Play
is continued until the play option is
changed or stopped.
• Intro :
Each track is played for 10 seconds. If you
press the ❿II button during Intro Play,
Normal Play will be performed.
If you press the ENTER button or the ❿
button after selecting a track, pause for
Resume Play is not performed. When
Intro Play is completed, Normal Play is
performed.
• Playlist :
The Playlist playback option allows you to
select the order in which you want tracks
to play.
2
01/12
RETURN
CD
03_L.I.E 00 :52
Anykay
Music
01. TRACK 1
02. TRACK 2
03. TRACK 3
04. TRACK 4
05. TRACK 5
06. TRACK 6
4:39
4:31
4:30
3:53
4:23
4:24
Play Option
Normal
The same can be used with a Mp3 disc.
Note
Playback
Playback - 5958 - Playback
Playback
Press the PIP button
• The current disc is played back on the PIP
screen located at the bottom of the screen.
1
The PIP function allows you to view a sub screen
together with the main screen in DVD mode.
You can watch DVD and TV together.
Using PIP
It may not work in VCR mode and it
work during play back in DVD mode.
Note
Switching between the PIP
and main screens
Press the PIP button again.
• Control will be swiched to main screen.
1
Use the CHANNEL ❷ button to select an
input source, and then press the ENTER
button.
• The selected input source is played back
on the PIP screen locating at the bottom
right of the screen.
2
Deactivating PIP
Press the PIP button again.
• PIP will be deactivated.
1
Playing back MP3 CD
Insert an MP3 CD into the disc tray.
• The MP3 menu is displayed and the tracks
(song) are played back.
1
Press the ❷ buttons to select the folder
you want to hear, and then press the
ENTER button.
• Press the ❷ buttons to select the track
(song) you want to hear, and then press
the ENTER button.
• You can also select the desired track
(song) by pressing the numeric buttons
on the remote.
2
DJDOC
05/16
DJDOC
KIMHJ
Seotaiji2
SES
YOUNG
01_INTRO(####)
RETURN
MP3
03_L.I.E 00 : 25
Anykay
Buttons on the Remote
❷ : Selects a track (song).
1
ENTER ( ) button:
Playbacks the selected track (song) or dis-
plays the files in the selected folder.
2
(l
➛➛
) button: Playbacks the next track.
4
(
❿❿
l) button: Returns to the beginning of the
current track when it is pressed during play-
back. If it is pressed again, your DVD
recorder moves control to and playback the
previous track.
5
RETURN ( ) button:
Moves to the parent of the folder to which
the current song belongs.
3
Playback
Playback - 6160 - Playback
Playback
Special VCR Playback
Features
While a videotape is playing, you can enjoy a vari-
ety of special playback features, including Still,
Frame Advance, Skip, Slow motion, and more.
Press the Play button again to resume normal play-
back.
Pause
In Play mode, press ❿II(PLAY/PAUSE) to
still a single frame.
1
Frame Advance
In the pause mode, press F.ADV/SKIP to
advance to the next frame.
2
Skip
In Play mode, press F.ADV/SKIP to cue
ahead exactly 30 seconds. Press F.ADV/SKIP
repeatedly up to 4 times to cue ahead 2 min-
utes.
4
Slow motion
In pause mode, press
❿❿
or
➛➛
button for
slow motion. Press the press
❿❿
or
➛➛
button repeatedly to very slow motion speed
from 1/5 to 1/30 of normal playback. Press
the PLAY button twice to resume normal
viewing.
6
Shuttle
In Play mode, Shuttle
❿❿
gradually increas-
es the cue speed: Double Speed playback -
Picture Search - Jet Search. Shuttle
➛➛
gradually slows down the tape, then goes
into Slow mode, Still mode, Reverse
PictureSearch and Reverse Jet Search.
Press the INFO. button to see the current
status of the VCR deck, as well as the tape
counter position and record speed.
5
Fps/Review
In Play mode, press Forward (❿❿) or
Rewind (➛➛ ) to Cue/review at two speeds:
• Picture Search — Press and release to
advance the tape forward or backward at 5
times normal speed.
• Jet Search — Press and hold to advance
the tape forward or backward at 7 times
normal speed.
3
PLAY
0:00:00 SP
Insert VHS Tape
Insert a standard VHS videotape into the
VCR deck.
• When a videotape is inserted, power will
turn on automatically.
1
Adjust Tracking Manually
During playback, press the CH/TRK
/
buttons to remove white lines from the pic-
ture.
1
Additional VCR Options
• See page 61 for special VCR Playback
features.
• See pages 63~64 for VCR Recording fea-
tures.
• See pages 65~66 for Timer Recording fea-
tures.
4
Play Tape
Press the
❿II
(PLAY/PAUSE) button on the
remote control or on the front panel of the
unit. The videotape will begin to play auto-
matically if it is missing the Record Safety
Tab and Auto Play is turned on. See page
41~42.
2
Stop Playback
Press the
(STOP) button on the remote
control or on the front panel of the unit.
3
To play a standard VHS videotape, just insert it into
the VCR deck and press the PLAY button. You can
turn on the Auto Play to enable the VCR deck to
play automatically when you insert a videotape
that is missing the Record Safety Tab. See page
41~42.
Playing a VCR
The Tracking adjustment removes the white lines
that sometimes appear during playback because of
slight differences in recording decks. The TRK but-
ton will automatically align the recorded tracks
with the playback heads to solve this problem. You
may also set tracking manually.
Tracking
62 - Playback
Playback
Recording
Rcording - 63
Recording the current
channel you are watching
DVD-RAM
DVD-RW
DVD-R
DVD-RAM/DVD-RW/DVD-R discs should be for-
matted in advance before beginning recording.
Most new discs are sold unformatted. Make sure to
format your unformatted discs before recording.
Enter a DVD-RAM disc into the disc tray.
1
Press the CHANNEL
❷
button to select
the channel you want to record.
2
Press the REC Speed button on remote con-
trol, to select the recording speed (quality).
• XP(High, approx. 1 hour)
SP(Standard,
approx. 2 hours)
LP(Low, approx. 4
hours)
EP(Extra Low, approx 6 hours)
3
RAM
S-VHS Playback
The DVD Recorder-VCR-VCR allows you to play-
back high quality S-VHS tapes.
Insert a S-VHS Tape
Insert an S-VHS tape into the VCR deck.
1
Start Playback
Press
❿II
(PLAY/PAUSE) on the remote con-
trol to begin playback of the S-VHS tape.
2
Variable Search
System
Press the ANYKEY button to display the search
screen in the stop mode. When a program is
recorded, the starting point is given an Index mark
for easy location. However, the VHS Index Search
System (VISS) cannot recognize index marks made
by old VCRs. If the VCR has trouble finding a
mark, it is probably because the cassette was
recorded on a VCR without VISS. If you want to
index two programs in a row, set your VCR to stop,
then start recording each program. Pause has no
effect on index marks.
Go to [0:00:00] stop
Use this feature when you want to search for
the [0:00:00] counter position on a cassette.
Press the CLEAR button at the point on the
tape where you want to set the counter to
[0:00:00]. While a cassette is stopped, press
the ANYKEY button. The VCR will rewind
or fast forward, searching for the [0:00:00]
counter position, and then automatically
stop at that position.
1
Forward
Reverse
End search
Use this feature when you want to search for
a blank position to record a program on a
cassette. While a cassette is stopped, press
ANYKEY button. The VCR will fast forward,
searching for a blank position, and then
automatically stop at that position. If the
VCR reaches the end of the tape during end
search, the tape will be ejected.
2
Scan and play
Use scan and play when you don’t know
exactly where a program is located on a cas-
sette tape.
- Forward Intro Scan
Highlight “Forward Intro Scan”, then press
the ENTER button.
- Reverse Intro Scan
Highlight “Reverse Intro Scan”, then press
the ENTER button.
3
Rcording
Important Safety Ins
Rcording - 6564 - Recording
Recording
Making a Timer Recording
DVD-RAM
DVD-RW
DVD-R
You may need to setup time (Setup - System
Setting).
It is required before you proceed with a timer
recording.
Press the TIMER REC button.
• The Timer Recording screen is displayed.
Using the MENU button:
! Press the MENU button.
@Press the❷ buttons to select Timer
Rec., and then press the ENTER or ❿
button.
#Select Timer record.
• If the current time is not set. Set the cur-
rent time first.
1Press the ENTER button.
• The Timer Recording screen are displayed.
Fill the input items using the arrow but-
tons.
➛❿: Moves to the previous/next item,
❷: Sets a value.
• TO : Select the media to record DVD or
VCR.
• SOURCE : The video input source (L1 or
L2), or the broadcasting chan-
nel you want to make a timer
recording for.
• Date : Set the recording day.
• Start/End Time : Start and end time of the
timer recording.
• Type (Recording cycle)
Once : Records once
Weekly : Records at a set time once a
week.
Daily : Record at a set time every day.
• Mode (Recording mode)
2
Using the TIMER REC button
Source
Using the TIMER REC button
Press the REC button.
• /is displayed on the screen and
recording begins.
4
Press the STOP button to stop or finish a
recording in progress.
• The message “Updating the information
of Disc. Please wait for a moment”.
5
• Press the REC PAUSE button to pause a
recording in progress.
• Press the REC PAUSE button again during
pause to esume recording.
Recording the current
channel you are watching
Use the channel ❷ button or numeric
buttons to select the channel to record.
• CATV channel: 1 to 125
• AIR channel: 2 to 69
1
One-Touch Recording
(OTR)
Pausing / Resuming
You can’t change the recording mode and
channel during recording.
Recording will stop automatically if there
is not enough space for recording.
Up to 99 titles can be recorded onto a
disc.
If the power is removed due to power fail-
ure or other reasons, the title being
recorded will not be saved onto the disc.
Recording will stop automatically if a
copy protected image is input.
For DVD-R discs, you must use a general
type disc to ensure correct recording.
Note
DVD-RAM
DVD-RW
DVD-R
DVD-RAM
DVD-RW
DVD-R
One-Touch Recording (OTR) allows you to add
recording time in 30-minute increments up to 4
hours at the touch of a button.
Start Recording.
Follow the instruction on page 65 to begin
recording.
2
Activate OTR.
While in Record mode, press the l(REC)
button again to activate One-Touch
Recording (OTR).
• Record length 0:30 appears on the On-
Screen Display and the DVD Recorder-
VCR-VCR will record for exactly 30 min-
utes.
3
Add Recording Time.
Continue pressing l(REC) to add recording
time in 30 minute increments up to 4 hours.
• The DVD Recorder-VCR-VCR stops
recording automatically when the time has
elapsed. And DVD Recorder-VCR-VCR
will be automatically turned off when the
OTR finish.
4
Rcording
Rcording - 6766 - Recording
Recording
Editing Timer Record List
DVD-RAM
DVD-RW
DVD-R
Press the TIMER REC button on the remote
control.
• The Timer Recording screen is displayed.
Using the MENU button
• Press the MENU button.
• Press the ❷ button to select Timer Rec.,
and then press the ENTER or ❿button.
• Press the ❷ button to select sheduled
Record List, and then press the ENTER or
❿button.
1
Press the ❷ button to select the number
of the timer recording you want to edit, and
then press the ENTER or ❿button.
• The Edit and Delete items are displayed.
2
Follow these directions to edit the timer record list.
Editing the settings for a
timer recording
Press the ❷ button to select Edit, and
then press the ENTER button.
• The Timer Recording screen is displayed.
Edit the items you want to modify. See the
Timer Recording section for more infor-
mation on Timer Recording Input items.
3
DVD
Making a Timer Recording
DVD-RAM
DVD-RW
DVD-R
AUTO : Select when you want to set video quality
automatically. It depends on remaining
time of DVD.
XP (high quality) : Select when audio and video
qualities are important.
(Approx. 1 hour)
SP (standard quality) : Select to record in standard
quality. (Approx. 2 hours)
LP (low quality) : Select when a long recording
time
is required.(Approx. 4
hours)
VCR
AUTO : Select when you want to set video quality
automatically. It depends on remaining
time of VCR tape.
SP : Standard Play, for best picture quality.
SLP : Super Long Play, for maximum recording
time (3 times SP).
Press the ENTER button.
• will appear on the display. It means that a
timer recording is registered.
3
Turn the power off to finish the timer
recording.
• If you turn power on, the scheduled timer
recording will be cancled.
• Will blink while a timer recording is set.
4
The timer recording time may have a dif-
ference from the set time depending on
disc status and overall timer recording sta-
tus (for example, overlapped time, or
when the previous recording ends within
the 2 minutes before the start time of the
next recording.)
Note
Rcording
Rcording - 6968 - Recording
Recording
Press the TIMER REC button.
• The Timer Recording screen is displayed.
Using the MENU button
• Press the MENU button.
• Press the ❷ button to select Timer Rec.,
and then press the ENTER or ❿button.
• Press the ❷ button to select scheduled
Record List, and then press the ENTER or
❿button.
1
Recording through a DV
jack
Connect the DV output jack of your cam-
corder to the DV input jack on the front of
your DVD Recorder-VCR using a DV cable
1
Power on your DVD Recorder-VCR and
switch to DV mode by pressing the INPUT
SEL. on the remote.
2
When your DVD Recorder-VCR is in the
stop state, set the operation mode of your
camcorder to play mode.
3
Press the REC button on your DVD
Recorder-VCR when the image from which
you want to start recording is displayed.
4
Press the STOP button on your DVD
Recorder-VCR when the recording is fin-
ished.
5
Follow these directions to record onto a disc the
outputs of a camcorder that has a DV output jack.
Deleting a Timer Recording
Entry
Follow these directions to delete an entry from the
timer record list.
DVD-RAM
DVD-RW
DVD-R
DVD-RAM
DVD-RW
DVD-R
Some camcorders may not work with
your DVD Recorder-VCR even if they
have a DV output jack.
Also refer to the user manual for your
camcorder when recording through a DV
jack.
Note
Press the ❷ button to select the number
of the timer recording you want to delete,
and then press the ENTER button.
• The Edit and Delete items are displayed.
2
Cancle Timer recording
Press the MENU button and select Timer
Rec and Timer Record List.
1
Select the program you want to cancel and
press ENTER button. choose DELETE if it is
right.
If you don’t want to register a timer record-
ing setting.
2
Watching the Images
Being Recorded (Time Slip)
DVD-RAM
Press the TIME SLIP button on the remote
control.
• The TIME SLIP lamp on your DVD
Recorder-VCR is lighted, and the recently
recorded 10-second images are played
back on the PIP screen.
• This function starts to operate after 10
seconds from the time you press the REC
button.
• On the TIME SLIP screen, you can play-
back, scan, or perform other operations
for the recorded program using the play-
back related buttons.
Press the ➛➛button to scan the recording
in the reverse order, from the end to the
start.
Press the ❿❿button to scan to the recently
recorded 10- second images.
1
Press the STOP button once to clear the
TIME SLIP function.
• To stop a recording while a TIME SLIP
function is in progress, press the STOP
button three times.
2
This function allows you to watch the recently
recorded 10-second images on the PIP screen while
a recording is in progress.
The Time Slip function does not operate
during a timer recording.
Note
Rcording
Important Safety Ins
Rcording - 7170 - Recording
Recording
Pause/Resume Recording
Press the ❿II(PLAY/PAUSE) button.
Press (REC) again to resume.
4
Stop Recording
Press the (STOP) button.
5
Watch a Different Channel
Press the TV/VCR button on the remote to
switch to your TV tuner, then select a differ-
ent channel on your television.
1
To Watch a DVD
Insert a DVD in the DVD deck. The output
will automatically change to the DVD and
start playback.
2
Add Recording Time
See One-Touch Recording (OTR) on the
following.
3
Start Recording
Press the l(REC) button on the remote con-
trol or front panel.
For options while recording is in progress,
see “Special Recording Features”.
3
Special Recording
Features
While a recording is in progress, you can watch a
different channel, watch a DVD, or add recording
time in 30-minute increments.
Start Recording
Follow the Basic Recording instructions on
page 63~64.
1
Maximum Recording Time - SP vs.
Tape Length SP (Standard Play) SLP (Super Long Play)
T-120 2 hrs 6 hrs
T-160 2hrs 40 mins 8 hrs
T-180 3 hrs 9 hrs
Record Speed
You can slow down the recording speed from SP to
SLP in order to fit six hours of programming on a
T-120 tape.
Set Record Speed
ress the REC SPEED button on the remote
control to set the Record Speed to one of the
following options:
• SP – Standard Play, for best picture quality.
• SLP – Super Long Play, for maximum
recording time (3 times SP).
2
The selected Record Speed will appear on
the front panel display and on-screen dis-
play.
Note
Deleting an entry from the
timer record list,
Deleting a Timer Recording
Entry
DVD-RAM
DVD-RW
DVD-R
Press the ❷ button to select Delete, and
then press the ENTER button.
• You will be prompted with the delete con-
firm message such as ‘Do you want to
delete No.02?’.
3
Press the ❷ buttons to select Yes, and
then press the ENTER button.
• The selected entry will be deleted from the
list.
4
Press the MENU button after finishing the
operation. The menu screen will disappear.
5
Basic Recording
Insert Tape
Insert a blank VHS tape into the VCR deck.
• Make sure the tape is long enough to
record the entire program.
To change the Recording Speed, see page
76.
1
Select a Channel to Record
Use the 0–9 buttons or the Channel
UP/DOWN arrow buttons to select the
desired channel, or press the INPUT SEL.
button to select Line 1, Line 2 or DV if
recording from an external device connected
to the front or rear Line inputs, respectively.
2
You can record a TV show in progress by inserting
a blank tape and pressing the (REC) button. You
can even add time in 30-minute increments up to
4 hours by pressing the (REC)button repeatedly;
see page 74.
Before You Begin...
• Power on the DVD Recorder-VCR-VCR
• Power on the TV
Be sure your videotape has a Record
Safety Tab. If the tab is missing, you can
cover the opening with a small piece of
tape. Warning: Do not cover this opening
unless you are sure you want to record
over the tape.
Note
Rcording
Rcording - 7372 - Recording
Recording
Press ENTER button to select start
position.
You can use ➛➛, ❿II or ❿❿ buttons to
search position.
2
VCR-->DVD
00:00:21
Start End
--:--:--
00:00:25
PLAY Copy All
DVD-RAM(VR)
Select End position as same way.
List will be made.
• In VCR mode copylist doesn’t be saved.
3
VCR-->DVD
00:00:21
Start End
--:--:-- --:--:--
02
00:01:04
PLAY
00:01:04
Copy All
DVD-RAM(VR)
Press Enter button to choose list
you want to copy.
• If you want to copy all content, select
“Copy All”.
4
VCR-->DVD
00:00:21
Start End
--:--:-- --:--:--
02
00:01:10
PLAY
00:01:04
Copy All
DVD-RAM(VR)
To copy play listm, select “Copy
Red”.
5
VCR-->DVD
00:00:21
Start End
--:--:--
02
00:00:43
PLAY Copy All
Play
Copy Rec
Delete
DVD-RAM(VR)
• If may not be accord with Start and
You can copy DVD to VCR or VCR to DVD.
Press MENU button and select Copy.
DVD to VCR
VCR to DVD
Copy to DVD or VCR
Select DVD --> VCR to copy DVD
to VCR.
1
If you want to copy from Copylist,
choose “Edit Copylist”.
• To copy from “Edit Copylist”, you need to
make Copylist. To make copy list, select
“New Copylist” (See page 84~85)
• If you want to copy directly, choose
“Direct Copy”.
2
DVD-RAM
DVD-RW
DVD-R
DVD-RAM(VR) Copy
Disc Manager
DVD --> VCR
VCR --> DVD
DVD-RAM(VR) DVD-->VCR
Disc Manager
Edit Copylist
Direct Copy
New Copylist
Select Playlist you want to copy
using ❷ buttons and press ❿button.
To copy play list, select “Copy Rec”.
3
Select VCR --> DVD to copy VCD
to DVD.
VCR --> DVD scene will be displayed.
1
Edit Copylist
---/00/2000 1
---/00/2000 12:00 PM
1 Scene
00/00/00 12:00:00 PM
00:00:44Play
Rename
Edit Scene
Copy Rec
Delete
DVD-RAM(VR)
DVD-RAM(VR) Copy
Disc Manager
DVD --> VCR
VCR --> DVD
Edit Copylist
DVD-RAM(VR)
---/00/2000 1
---/00/2000 12:00 PM
1 Scene
00/00/00 12:00:00 PM
00:00:44
• You can make 6 copylists.
• Direct copy is only way to copy on DVD-
R disc.
DVD-R disc doen’t work edit function.
Editing
Editing - 75
Setup
Timer Rec.
CD
CD
Setup
Timer Rec.
Photo
Music
JPEG+MP3
Setup
Timer Rec.
Copy
Title List
Playlist
Disc
Manager
DVD-RAM(VR)
DVD-RAM(VR)
Setup
Timer Rec.
Copy
Title List
Disc
Manager
DVD-RW(V)
DVD-RW(V)
Setup
Timer Rec.
Copy
Title List
Disc
Manager
DVD-R(V)
DVD-R(V)
Press the MENU button again to hide the
menu screen. You can configure the set-
tings on the Setup screen using the arrow
and ENTER buttons.
Note
Editing Viewing the Menu
Functions for of Disc
There are a variety of menu functions depending
on the disc type. Press the MENU button.
Setup
Timer Rec.
Setup
Timer Rec.
Title Menu
Disc Menu
No Disc
DVD-RAM
DVD-RW
DVD-R
No Disc
DVD-VIDEO
DVD-VIDEO
74 - Editing
Editing
Important Safety Ins
Editing - 7776 - Editing
Editing
Viewing Title List
DVD-RAM
DVD-RW
DVD-R
Playing a Title List Entry
DVD-RAM
DVD-RW
DVD-R
Press the ❷ button to select an entry to
edit, and then press the ENTER or ❿but-
ton.
• Play: Playbacks the selected entry
• Rename: Renames the title of the selected
entry.
• Delete: Deletes the selected entry from the
list.
• Edit: Deletes a desired section.
• Protect: Locks or unlocks the selected
entry.
4
Press the MENU button after the operation
is finished. The menu screen will disappear.
5
Press the ❷ button to select Title List, and
then press the ENTER or ❿button.
• The View Title List screen is displayed.
2
Press the ❷ button to select an entry you
want to playback from Title List, and then
press the ENTER or ❿button.
• The Edit Movie List menu is displayed.
3
Follow these directions to playback an entry from
the Title List.
Press the MENU button.
1
Viewing Title List
You can playback the recorded titles, edit a title
name, edit record list entries and lock or unlock
the record list.
DVD-RAM
DVD-RW
DVD-R
Press the ❷ button to select Title List, and
then press the ENTER or ❿button.
• The Title List screen is displayed.
2
Press the ❷ button to select Title List, and
then press the ENTER or ❿button.
• The Edit menu is displayed at the right.
(Play, Rename, Delete, Edit, Protect)
3
!Playback screen for recorded entry
@ Information window for the selected
entry: Title name, recording date, record-
ing time, lock status, recording mode
# Recorded entry No.
$ Recorded entry title
% Recording duration (i.e., playtime)
^ Record list edit items
& Helps on buttons
Press the MENU button.
1
Sport
00:00:21
00:00:03
00:00:15
00:00:18
00:06:32
00:08:16
00:09:36
Movie
06
02/01/01
00:25:30(PM)
07
!
&
@#$ %^
Editing
Editing - 7978 - Editing
Editing
Follow these directions to delete an entry from the
Movie List.
Press the MENU button.
1
Press the ❷ button to select Title List, and
then press the ENTER or ❿button.
• The View Title List screen is displayed.
2
Press the ❷ button to select an entry you
want to delete from Movie List, and then
press the ENTER or ❿button.
• The Edit Title List menu is displayed.
3
Deleting a Title List
Entry
DVD-RAM
DVD-RW
DVD-R
Press the ❷ button to select Delete, and
then press the ENTER button.
• You will be prompted with the confirma-
tion message ‘Do you want to delete?
(Related playlists may be deleted.)’.
• You cannot delete a protected entry.
If you want to delete a protected entry,
disable Protect for it on the Lock item.
4
Be careful that you cannot recover an
entry once it is deleted from Movie List.
Note
Press the ❷ button to select Play, and
then press the ENTER button.
• The selected entry (title) will be played
back.
4
You can also playback a recorded program
by pressing the ANYKEY button and
using the title, chapter or time items.
Note
Renaming a Title List
Entry
DVD-RAM
DVD-RW
DVD-R
Follow these directions to rename a record list
entry, i.e., to edit the title of a recorded program.
Press the MENU button.
1
Press the ❷ button to select Title List, and
then press the ENTER or ❿button.
• The View Title List screen is displayed.)
2
Press the ❷ button to select an entry you
want to rename from Title List, and then
press the ENTER or ❿button.
• The Edit Title List menu is displayed.
3
Press the ❷ button to select Rename, and
then press the ENTER button.
• The Rename screen is displayed.
4
Enter the desired characters using the arrow
(❷ ➛❿) buttons.
• Back Space: Moves the cursor to the previ-
ous character. (Equivalent with the CAN-
CEL button).
• Space: Enters a blank and moves the cur-
sor to the right.
• Delete: Deletes the character at the cursor
position.
• Clear: Deletes all the character inputs.
• Save: Registers the character inputs.
5
Press the arrow buttons to select Save, and
then press the ENTER button.
• The changed title is displayed on the title
item of the selected entry.
6
Playing a Title List Entry
Editing
Editing - 8180 - Editing
Editing
Follow these directions to delete a section from a
Title List entry.
Press the MENU button.
• You cannot recover an entry once it is
deleted from Title List
1
Press the ❷ button to select Title List, and
then press the ENTER or ❿button.
• The View Title List screen is displayed.
2
Press the ❷ button to select an entry you
want to edit from Title List, and then press
the ENTER or ❿button.
• The Edit Title List menu is displayed.
3
Press the ❷ button to select Edit, and
then press the ENTER button. The Edit
Program is displayed.
!Playback bar
@ Playtime
# Section deletion start point window and
time
$ Section deletion end point window and
time
4
Press the ❷ button to select Start, and
then press the ENTER button.
• The image and time at the start point are
displayed on the start window.
6
Search the start points of the section you
want to delete using the playback related
buttons.
• Playback related buttons: ❿II ,
❿❿
l, l
➛➛
.
5
Deleting a Section from
a Title List Entry
DVD-RAM
DVD-RW
DVD-R
Be careful that you cannot recover an
entry once it is deleted from Title List.
Note
Follow these directions to lock an entry if you
want to protect it from unexpected deletions.
Press the MENU button.
• You cannot recover an entry once it is
deleted from Title List.
1
Press the ❷ button to select Title List, and
then press the ENTER or ❿button.
• The View Title List screen is displayed.
2
Press the ❷ button to select an entry you
want to protect from Title List, and then
press the ENTER or ❿button.
• The Edit Title List menu is displayed.
3
Locking a Title List
Entry
DVD-RAM
DVD-RW
DVD-R
Press the ❷ button to select Protect, and
then press the ENTER button.
• You will be prompted with the confirma-
tion message ‘Title Protection:’.
4
Press the ❷ buttons to select No, and
then press the ENTER button.
• The key icon on the information window
for the selected entry changes to the
locked status.
5
Editing
Editing - 8382 - Editing
Editing
Follow these directions to create a new playlist
entry from a recorded title.
Press the MENU button when the disc is
stopped.
1
Press the ❷ button to select Playlist, and
then press the ENTER or ❿button.
2
Press the ❷ button to select New Playlist,
and then press the ENTER or ❿button.
• The Make Scene screen is displayed.
3
Search the end point of the section from
which you want to create a new scene using
the playback related buttons, and then press
the ❿II button.
6
Creating a Playlist Entry
DVD-RAM
DVD-RW
Select the start point of the section from
which you want to create a new scene using
the playback related buttons, and then press
the PAUSE button.
• Playback related buttons: ❿II,
❿❿
l, l
➛➛
4
Press the ❷ button to select Start, and
then press the ENTER button.
• The image and time at the start point are
displayed on the Start window.
• The yellow-colored selection bar moves to
the End item.
5
Press the ❷ button to select End, and
then press the ENTER button.
• The image and time at the end point are
displayed on the Section deletion end
point window.
8
Press the ❷ buttons to select Delete, and
then press the ENTER button.
• Message “Do you want to delete?” will be
displayed.
9
Press RETURN button to return to the Title
List screen.
• Press the MENU button to exit the menu
after the operation is finished.
The Title List screen will disappear.
10
Select the end point of the section you want
to delete using the playback related buttons,
and then press the PAUSE button.
7
The length of the selection to delete
should be at least 5 seconds long.
If the length of the section to delete is less
than 5 seconds, you will be prompted
with the message The set section is too
short’.
If the end time precedes the start time,
you will be prompted with the message
‘Setting sequence is wrong.’
Note
Deleting a Section from
a Title List Entry
DVD-RAM
DVD-RW
DVD-R
Editing
Important Safety Ins
Editing - 8584 - Editing
Editing
Playing Playlist Entries
Editing a Playlist Entry
DVD-RAM
DVD-RW
Press the ❷ button to select a function to
use, and then press the ENTER button.
• Play: Playbacks the selected entry.
• Rename: Renames the title of the selected
entry. This functionality is same
with the Rename item of the Edit
Record List.
• Edit Scene: Edits scenes of the selected
entry.
• Copy: Copies the selected entry.
• Delete: Deletes the selected entry from the
list.
5
Press the MENU or PLAYLIST button after
the operation is finished. The Playlist screen
will disappear.
6
Press the ❷ button to select Play, and
then select the ENTER button.
• The playlist entries will be playback.
• The screen returns to the Edit Playlist
screen when the playback is finished.
1
Press the STOP button to stop the playback
in progress.
• The screen returns to the Edit Playlist
screen.
2
Press the arrow buttons to select save, and
then press the ENTE button.
• The Name you changed is displayed on
the title item of the selected playlist entry.
3
Follow these directions to playback the playlist
entries.
Renaming Playlist Entries
Press the ❷ button to select Rename, and
then press the ENTER button.
• The Rename screen is displayed.
1
Select the desired characters using the arrow
❷➛❿ buttons.
• This functionality is same with the
Rename item of the Edit Record List
screen.
2
Follow these directions to rename a playlist entry,
i.e., edit the title of a playlist entry.
Follow these directions to playback or edit
(rename, edit scene, copy and delete ) the newly
created playlist entries.
Press the MENU button when the disc is
stopped.
1
Press the ❷ button to select Playlist, and
then press the ENTER or ❿button.
2
Editing a Playlist Entry
DVD-RAM
DVD-RW
Press the π† button to select End, and then
press the ENTER button.
• The image and time at the end point are
displayed on the End window.
• The yellow-colored selection bar moves to
the Make item.
7
Press the ENTER button to confirm.
• Repeat the above steps to make more than
one scenes.
8
Press the ❷ buttons to select RETURN,
and then select the ENTER or ❿button.
• The Edit Playlist screen is displayed.
9
Press the MENU or RETURN button to exit
the menu.
• The Playlist screen will disappear.
10
You can create up to 30 playlist entries.
Note
Press the ❷ button to select Edit Playlist,
and then press the ENTER or ❿button.
• The Edit Playlist screen is displayed..
3
Press the ❷ button to select an entry
(title) you want to edit from the Playlist,and
then press the ENTER or ❿button.
• The Edit Playlist menu is displayed.
:Play, Rename, Edit Scene, Copy, Delete
4
Creating a Playlist Entry
DVD-RAM
DVD-RW
Editing
Editing - 8786 - Editing
Editing
RETURNSELECTMOVE EXIT
Modify Scene
DVD-RW(VR)
03/05/29 03:34:00(PM)
00:00:20
Start
End
Change
Cancel
Scene No. 001
Start 00:00:00
End 00:00:00
B. Modifying a Scene
(Replacing a Scene)
Press the arrow buttons to select the scene
youwant to modify, and then press the
ENTER button.
1
Press the arrow buttons to select Modify,
and then press the ENTER button.
• The Modify Scene screen is displayed.
2
RETURNSELECTMOVE EXIT
Edit Playlist
DVD-RW(VR)
No. Title Length Edit
9 Scene
00/05/10 10:25:30(PM)
01 01 00:00:17
02 02 00:00:06
03 03 00:00:06
04 04 00:08:37
Play
Rename
Edit Scene
Copy Rec
Delete
Select the start point of the section with
which youwant to modify the selected scene
using the playback related buttons.
• Playback related buttons: ❿II,
❿❿
l, l
➛➛
.
3
RETURNSELECTMOVE EXIT
Modify Scene
DVD-RW(VR)
03/05/29 03:34:00(PM)
00:00:25
Start
End
Change
Finish
Scene No. 001
Start 00:00:25
End 00:00:00
Press the ❷ button to select Start, and
then press the ENTER button.
• The image and time at the start point are
displayed on the Start window.
4
RETURNSELECTMOVE EXIT
Modify Scene
DVD-RW(VR)
03/05/29 03:34:00(PM)
00:00:30
Start
End
Change
Finish
Scene No. 001
Start 00:00:10
End 00:00:30
Select the end point of the section with
which you want to modify the selected
scene using the playback related buttons.
5
Press the ❷ buttons to select Change, and
then press the ENTER button.
• The scene you wanted to modify is
changed with the selected section.
6
Editing Scene for a
Playlist Entry
DVD-RAM
DVD-RW
Follow these directions to edit scenes for a playlist
entry.
Press the MENU button when the disc is
stopped.
1
Press the ❷ button to select Playlist, and
then press the ENTER or ❿button.
2
Editing Scene for a
Playlist Entry
DVD-RAM
DVD-RW
RETURNSELECTMOVE EXIT
Edit Playlist
DVD-RW(VR)
No. Title Length Edit
9 Scene
00/05/10 10:25:30(PM)
01 01 00:00:17
02 02 00:00:06
03 03 00:00:06
04 04 00:08:37
Play
Rename
Edit Scene
Copy Rec
Delete
Press the ❷ button to select Edit Playlist,
and then press the ENTER or ❿button.
• The Edit Playlist screen is displayed.
3
Press the ❷ button to select an entry
(title) you want to edit from the Playlist,and
then press the ENTER or ❿button.
• The Edit Playlist menu is displayed.
4
RETURNSELECTMOVE EXIT
Edit Scene
DVD-RW(VR)
Scene No. 1/9 Playlist No. 3
Play
Modify
Move
Add
Delete
01 00:00:26 02 00:00:07 03 00:00:04
04 00:00:03 05 00:00:11 06 00:00:04
RETURNSELECTMOVE EXIT
Edit Scene
DVD-RW(VR)
Scene No. 2/9 Playlist No. 3
Play
Modify
Move
Add
Delete
01 00:00:26 02 00:00:07 03 00:00:04
04 00:00:03 05 00:00:11 06 00:00:04
Press the ❷ button to select Edit Scene,
and then press the ENTER button
• The Edit Scene screen is displayed.
5
A. Playing a Desired Scene
Press the arrow buttons to select the scene
you wan to playback, and then press the
ENTER button.
• The playlist entry to playback is selected.
1
Press the ENTER button.
• The selected scene is played back.
2
Editing
Editing - 8988 - Editing
Editing
Editing Scene for a
Playlist Entry
DVD-RAM
DVD-RW
RETURNSELECTMOVE EXIT
Add Scene
DVD-RW(VR)
03/05/10 10:25:30(AM)
00:00:15
End
Add
Cancel
Scene No. 001
Start 00:00:15
End 00:00:00
Start
Press the ❷ button to select End, and
then press the ENTER button.
• The image and time at the end point are
displayed on the End window.
6
RETURNSELECTMOVE EXIT
Add Scene
DVD-RW(VR)
03/05/10 10:25:30(AM)
00:00:15
End
Add
Cancel
Scene No. 001
Start 00:00:15
End 00:00:00
Start
Press the ❷ buttons to select Add, and
then press the ENTER button.
• The section you wanted to add is added
before the scene selected in step 1.
7
RETURNSELECTMOVE EXIT
Edit Scene
DVD-RW(VR)
Scene No. 10/10 Playlist No. 3
Play
Modify
Move
Add
Delete
01 00:00:26 02 00:00:07 03 00:00:04
04 00:00:15
E. Deleting a Scene from the
Playlist
Press the arrow buttons to select the scene
you want to delete, and then press the
ENTER button.
1
Press the ❷ buttons to select Delete, and
then press the ENTER button.
• You will be prompted with the scene
delete confirmation message ‘Do you want
to delete the selected scene?’.
2
RETURNSELECTMOVE EXIT
Edit Scene
DVD-RW(VR)
Scene No. 10/10 Playlist No. 3
Play
Modify
Move
Add
Delete
01 00:00:26 02 00:00:07 03 00:00:04
04 00:00:15
No. 01
Do you want to delete ÔNo. 01Õ?
NoYes
Press the arrow buttons to select Yes.
• The selected scene is deleted.
• You will be returned to the Edit Scene
screen automatically.
3
RETURNSELECTMOVE EXIT
Edit Scene
DVD-RW(VR)
Scene No. 1/7 Playlist No. 4
Play
Modify
Move
Add
Delete
01 00:00:26 02 00:00:07 03 00:00:04
04 00:00:03 05 00:00:11 06 00:00:04
C. Moving a Scene
(Changing the Position of a Scene)
Press the arrow buttons to select the scene
youwant to move (change the position), and
then press the ENTER button.
1
Press the ❷ buttons to select Move, and
then press the ENTER button.
• A yellow selection window is displayed on
the scene to move.
2
RETURNSELECTMOVE EXIT
Edit Scene
DVD-RW(VR)
Scene No. 1/7 Playlist No. 4
Play
Modify
Move
Add
Delete
01 00:00:26 02 00:00:07 03 00:00:04
04 00:00:03 05 00:00:11 06 00:00:04
Press the arrow buttons to select the posi-
tion where you want to move the selected
scene, and then press the ENTER button.
• The selected scene is moved to the new
position.
3
You cannot move the selected scene to the
position of its next scene, because the
selected scene should be inserted before
that position, which actually requires no
action.
Note
RETURNSELECTMOVE EXIT
Add Scene
DVD-RW(VR)
03/05/10 10:25:30(AM)
00:00:10
Start
End
Add
Cancel
Scene No. 001
Start 00:00:00
End 00:00:00
D. Adding a Scene
Press the arrow buttons to select the scene
before which you want to add as a new
scene, and then press the ENTER button.
• A yellow selection window is displayed on
the scene to add as a new scene.
1
Press the ➛❿ buttons to select Add and
then press the ENTER button.
• The Add Scene screen is displayed.
2
elect the start point of the section to which
you want to add the scene in step 1 using
the playback related buttons.
• Playback related buttons: ❿II,
❿❿
l, l
➛➛
3
Select the end point of the section you want
to add as a new scene using the playback
related buttons.
5
Press the ❷ button to select Start, and
then press the ENTER button.
• The image and time at the start point are
displayed on the Start window.
4
Editing Scene for a
Playlist Entry
DVD-RAM
DVD-RW
Editing
Editing - 9190 - Editing
Editing
Press the ❷ button to select Delete, and
then press the ENTER button.
• You will be prompted with the delete con-
firmation message ‘Do you want to
delete?’.
5
Do you want delete?
Press the ❷ buttons to select Yes, and
then press the ENTER button.
• The screen returns to the Edit Playlist
screen automatically after the delete opera-
tion is finished.
6
Deleting a Playlist Entry
from the Playlist
DVD-RAM
DVD-RW
DVD-R
DVD-RAM
DVD-RW
DVD-R
Editing Disc Name
Press the MENU button when the disc is
stopped.
1
Press the ❷ button to select Disc Name,
and then press the ENTER or ❿button.
• The Edit Name screen is displayed.
3
Press the ❷ button to select Disc
Manager, and then press the ENTER or ❿
button.
2
Disc Manager
Follow these directions to give a name to a disc
Copying a Playlist Entry
to the VCR
DVD-RAM
DVD-RW
Press the MENU button when the disc is
stopped.
1
Press the ❷ button to select Playlist, and
then press the ENTER or ❿button.
2
Press the ❷ button to select Edit Playlist,
and then press the ENTER or ❿button.
• The Edit Playlist screen is displayed.
3
Press the ❷ button to select an
entry(title) you want to copy to the VCR,
and then press theENTER or ❿button.
• The Edit Playlist menu is displayed.
:Play, Rename, Edit Scene, Copy Rec,
Delete
4
Press the ❷ button to select Copy, and
then press the ENTER button.
• The title you choose is played and copied
to VCR tape.
5
Press the MENU button when the disc is
stopped.
1
Press the ❷ button to select Playlist, and
then press the ENTER or ❿button.
2
Press the ❷ button to select an entry
(title) you want to delete from the Playlist,
and then press the ENTER or ❿button.
• The Edit Playlist menu is displayed.
:Play, Rename, Edit Scene, Copy Rec,
Delete
4
Press the ❷ button to select Edit Playlist,
and then press the ENTER or ❿button.
• The Edit Playlist screen is displayed.
3
Deleting a Playlist Entry
from the Playlist
DVD-RAM
DVD-RW
DVD-R
Editing
Editing - 9392 - Editing
Editing
Disc Manager
Press the ❷ button to select Protected,
and then press the ENTER button.
4
Disc Protect will operate only if cartridge
protect is cleared.
Note
DVD-RAM
DVD-RW
RETURNSELECTMOVE EXIT
Disc Setting
DVD-RAM(VR)
Disc Name
Disc Protection
Disc Format
Delete All Title Lists
Cartridge Protect Info
:
: Not protected
RETURNSELECTMOVE EXIT
Disc Setting
DVD-RAM(VR)
Disc Name
Disc Protect
Disc Format
Cartridge Protect Info
:
: Not protected
This disc cannot be formatted
(the disc is protected).
OK
Formatting a DVD-RAM/DVD-RW
Disc
Press the MENU button with the disc
stopped.
1
Press the ❷ button to select Disc Setting,
and then press the ENTER or the ❿button.
2
Press the ❷ button to select Disc Format,
and then press the ENTER or the ❿button.
• You will be prompted with the confirma-
tion message 'Do you want to format
disc?'.
• You will be prompted with the confirma-
tion message 'All data will be deleted. Do
you want to continue?'.
3
Use these instructions to format a disc. The car-
tridge write protect tab should be set to the unpro-
tect position. The disc protect should also be
cleared.
Enter the desired characters using the arrow
buttons.
4
Press the arrow buttons to select Save, and
then press the ENTER button.
• A disc name was given to the disc.
5
You may need to clear cartridge protection
or unlock the protect before beginning
editing.
Note
Disc Manager
Disc Protection
Press the MENU button when the disc is
stopped.
1
Press the ❷ button to select Disc
Manager, and then press the ENTER or ❿
button.
2
Disc Manager
Press the ❷ button to select Disc
Protection, and then press the ENTER or ❿
button.
3
Disc Protection allows you to protect your discs
from disc format and program deletion due to
unintended operations.
DVD-RAM
DVD-RW
DVD-R
Disc Manager
Editing
Editing - 9594 - Editing
Editing
Cartridge Protect Info (DVD-
RAM)
Press the MENU button with the disc
stopped.
1
Disc Protect allows you to protect discs from disc
formatting and program deletion due to unintend-
ed operations. The cartridge write protect tab
should be set to the unprotect position to be able
to make a recording to a DVD-RAM disc.
RETURNSELECTMOVE EXIT
Disc Setting
DVD-RAM(VR)
Disc Name
Disc Protection
Disc Format
Delete All Title Lists
Cartridge Protect Info
:
: Not protected
All data will be deleted.
Do you want to continue?
NoYes
Press the ❷buttons to select Disc Setting,
and then press the ENTER or the ❿button.
2
RETURNSELECTMOVE EXIT
Disc Setting
DVD-RAM(VR)
Disc Name
Disc Protect
Disc Format
Cartridge Protect Info
:
: Not protected
Disc cartridge is protected.
Open tray and check disc.
OK
RETURNSELECTMOVE EXIT
Disc Setting
DVD-RAM(VR)
Disc Name
Disc Protect
Disc Format
Cartridge Protect Info
:
: Not protected
Disc cartridge is protected.
Open tray and check disc.
OK
Press the ❷ buttons to select Cartridge
Protect Info, and then press the ENTER or
the ❿button.
• The cartridge protect info for the disc is
displayed.
If the disc cartridge is protected, open the
disc tray and check the disc.
3
If the disc cartridge is not protected, proceed
with recording to the disc.
Disc Protect will operate only if cartridge
protect is set to Not Protected.
Note
RETURNSELECTMOVE EXIT
Disc Setting
DVD-RAM(VR)
Disc Name
Disc Protection
Disc Format
Delete All Title Lists
Cartridge Protect Info
:
: Not protected
Press the ❷ button to select Disc
Manager, and then press the ENTER or the
❿button.
2
RETURNSELECTMOVE EXIT
Disc Setting
DVD-RW(VR)
Disc Name
Disc Protect
Disc Format
Cartridge Protect Info
:
: Not protected
Choose the recording format fot DVD-RW.
DVD-VR DVD-V
Press the ➛❿ buttons to select Yes, and
then press the ENTER button.
• The disc is formatted.
DVD-RW
DVD-VR and DVD-V are defined according to
their recording format
4
Press the ❷ button to select Delete All Title Lists,
and then press the ENTER or the ❿button.
• You will be prompted with the confirma-
tion message 'Do you want to delete?'.
• You cannot delete a protected entry.
If you want to delete a protected entry, dis-
able Protect for it on the Lock item.
• Disc Protection: When Protected or
Cartridge Protection has been set, or when
a DVD-RAM is used, data cannot be delet-
ed from a disc.
3
Press the ❷ buttons to select Yes, and then press
the ENTER button.
• The disc is deleted.
4
DVD-VR DVD-V
Editing Possible Inconvenience
(Partial editing is possible)
(A chapter or a title is
edited separately)
DISC DVD-RAM DVD-RW
DVD-RW
DVD-RAM
DVD-RW
Delete All Title Lists
Press the MENU button with the disc
stopped.
1
Follow these instructions to delete all title lists.
DVD-RAM
DVD-RW
DVD-R
Disc Manager
Editing
Editing - 9796 - Editing
Editing
Unfinalizing a disc (V/VR mode)
DVD-RAM
Press the MENU button with the disc
stopped.
1
RETURNSELECTMOVE EXIT
Disc Unfinalize
DVD-RW(VR:F)
100%
Completed!
Press the ❷ button to select Disc Setting,
and then press the ENTER or the ❿button.
2
RETURNSELECTMOVE EXIT
Disc Setting
DVD-RW(VR:F)
Disc Name :
Disc Format : DVD-VR
Disc Unfinalize
:
: Not protected
Do you want to unfinalize disc?
NoYes
RETURNSELECTMOVE EXIT
Disc Setting
DVD-RW(VR:F)
Disc Name :
Disc Format : DVD-VR
Disc Unfinalize
:
: Not protected
Disc will be unfinalized.
Do you want to continue?
NoYes
Press the ❷ button to select Disc Finalize,
and then press the ENTER or the ❿button.
• You will be prompted with the message
'Do you want to unfinalize disc?'. If you
select Yes, you will be prompted again
with the message ' Disc will be unfinal-
ized. Do you want to continue?'
3
Press the ❷ buttons to select Yes, and then press
the ENTER button.
• The disc was finalized.
Once a disc is finalized, you can delete no
entry from the record list.
Note
• A DVD-RW can be finalized or unfinalized in
Video mode.
Finalize Unfinalize
Mark DVD-Video(VR) DVD-RW(V)
Operation Same as Additional
DVD-Video recording and
deletion are
possible.
• A DVD-RW can be finalized or unfinalized in VR
mode.
Finalize Unfinalize
Mark DVD-Video(VR:F) DVD-RW(VR)
Operation Additional recording,
Additional recording,
deletion, editing, and
deletion, editing, and
protection are impossible.
protection are possible.
Press the ❷ buttons to select Yes, and then press
the ENTER button.
• The disc is finalized.
Disc Manager
Finalizing a disc
Press the MENU button with the disc
stopped.
1
After you record titles onto a DVD-RW/DVD-R disc
with your DVD Recorder-VCR, it needs to be final-
ized before it can be played back on external
devices.
RETURNSELECTMOVE EXIT
Disc Setting
DVD-RW(VR)
Disc Name :
Disc Protection : Not protected
Disc Format : DVD-VR
Disc Finalize
Press the ❷buttons to select Disc Setting,
and then press the ENTER or the ❿but-
ton.
2
RETURNSELECTMOVE EXIT
Disc Setting
DVD-R(V)
Disc Name :
Disc Protection : Not protected
Disc Finalize
RETURNSELECTMOVE EXIT
Disc Setting
DVD-RW(VR)
Disc Name :
Disc Protection : Not protected
Disc Format : DVD-VR
Disc Finalize
:
: Not protected
Do you want to finalize disc?
NoYes
Press the ❷ button to select Disc Finalize,
and then press the ENTER or the ❿button.
• You will be prompted with the message
'Do you want to finalize disc?'. If you
select Yes, you will be prompted again
with the message ' Disc will
be finalized. Do you want to continue?'
3
DVD-RAM
DVD-RW
Once a disc is finalized, you cannot delete
entries from the record list.
After being finalized, the DVD-R operates
in the same manner as a DVD-Video.
Depending on the kind of disc, the dis-
played screen may have a slight difference.
Note
Reference
Important Safety Ins
Reference - 99
If your product malfunctions, go through the check points below before contacting a Samsung
authorized service center,
•
Check whether the power cord is securely plugged into the power outlet.
•
Did you press the power button of your DVD Recorder-VCR-VCR
The DVD Recorder-VCR-VCR requires some time to initialize it and logo will
be displayed for approx. 15 seconds after it is turned on.
•
Check whether the power cord is securely plugged into the power outlet.
•
Did you set the DVD Recorder-VCR-VCR channel settings correctly?
•
Check the free space on your DVD-RAM/DVD-RW/DVD-R disc.
•
Did you turn the power off after setting a timer recording?
•
Check the recording time and end time settings again.
•
Recording will be cancelled, if the power is removed due to a power
failure or other reason during recording.
•
Check whether the disc is formatted. This product can record on
formatted discs only. (See page 93.)
•
Is the DVD-RAM cartridge protected?
Set the write protect tab to the unprotect position.
•
Check whether your DVD-RAM/DVD-RW/DVD-R disc has a sufficient
free space.
Recording is available for DVD-RW/DVD-RAM disc only.
If a program is copy protected, you cannot record it.
Press the ❿II and < buttons of your DVD Recorder-VCR-VCR at the same time
when the power is on. All settings including password will revert to factory
settings. Do not use it if not absolutely required.
(Note that this function is available only when there is no disc inserted.)
•
Check whether the disc is inserted correctly with the label facing up.
•
Check the regional code of your DVD disc.
•
This DVD Recorder-VCR-VCR cannot playback some types of disc. (See page
14.)
•
Are you watching a program in slow or skip mode?
If you are playing a program at a speed other than normal speed, sound
is not output.
•
Check the connections and initial settings.
•
Check whether the disc is damaged.
Clean up the disc, if necessary.
•
Check whether the disc is inserted correctly with the label facing up.
The input is dis-
played for a while
when the power
turns on.
Cannot record
TVprograms.
Timer recording
does not work
properly.
Cannot
record.
I pressed the REC
button but there is
no response.
It forget the pass
word for parental
care.
Cannot playback
the disc.
No sound.
No power.
Troubleshooting
(DVD-VIDEO/DVD-RAM/DVD RW/DVD-R)
Reference
Troubleshooting
(DVD-VIDEO/DVD-RAM/DVD RW/DVD-R)
Troubleshooting
Problems and Solutions (VCR)
Specifications
LIMITED WARRANTY TO ORIGINAL
PURCHASER
❷
❷
❷
❷
98 - Reference
Reference
Reference - 101
100 - Reference
Reference
Problems and Solutions (VCR)
Before contacting the Samsung after-sales service, perform the following simple checks.
Problem Explanation/Solution
No power ◆Check that the power plug is connected to a wall outlet.
◆Have you pressed the STANDBY/ON button?
You cannot insert a video cassette ◆A video cassette can only be inserted with the window
side up and the safety tab facing you.
The television programme was not recorded
◆Check the DVD Recorder-VCR-VCR aerial connections.
◆Is the DVD Recorder-VCR-VCR tuner properly set?
◆Check if the safety tab is intact on the cassette.
Timer recording was unsuccessful ◆Was the STANDBY/ON button pressed to activate the timer?
◆Re-check the recording start/stop time settings.
◆If there was a power failure or interruption during timer
recording, the recording will have been cancelled.
No playback picture or the picture ◆Check to see if you are using a prerecorded tape.
is distorted
You cannot see normal broadcasts ◆Check the TUNER/EXTERNAL setting. It should be on TUNER.
◆Check the TV/VCR aerial connections.
Noise bars or streaks on playback ◆Press the TRK (
or
❷
) buttons to minimize this effect.
When the
❿II
button is pressed ◆A still picture may have “noise bars”, depending on the
during playback, the still picture condition of the tape. Press the TRK (
or
❷
) buttons
has severe “noise bars” streaks during SLOW motion to minimize this effect.
Video Head Cleaning ◆If poor pictures appear on a variety of cassettes, the video
heads may need cleaning. This is not a common problem
and unless it appears, the heads should not be cleaned.
When cleaning the video heads, read all instructions
provided with the head cleaning cassette. Incorrect head
cleaning can permanently damage the video heads.
If when tuning in your TV to the DVD Recorder-VCR
1. Remove the aerial input plug from the socket marked (aerial
-VCR
TV does not find the Screen symbol) on the rear of the DVD Recorder-VCR-VCR.
or the pattern when found suffers 2. Carry out the instructions “Tuning Your Television for the
from interference, it may be due to the DVD Recorder-VCR-VCR”
DVD Recorder-VCR-VCR output channel clashing with
3.
Carry out the instructions “Setting the DVD Recorder-VCR-VCR output
the normal TV transmissions in your area.
Channel”, move the channel number
To prevent this you will need to change the
several channels down from the original setting.
DVD Recorder-VCR-VCR output channel in
4. Replace the aerial plug into the socket marked (aerial symbol)
the following
way
on the rear of the DVD Recorder-VCR-VCR.
5. Re-tune your TV to the DVD Recorder-VCR-VCR again by following
instructions “Tuning Your Television for the DVD Recorder-VCR-VCR”
6. If the problem still exists repeat steps 1 to 5 moving several
more channels away from the original setting.
If you are unable to solve the problem after reading the above instructions, note:
◆The model and serial number on the rear of your DVD Recorder-VCR-VCR
◆The warranty information
◆A clear description of the problem
Then contact your nearest SAMSUNG after-sales service.
Troubleshooting
You cannot use the operation or function due to one of the following
reasons:
(1) Your DVD disc restricts it.
(2) Your DVD disc does not support the feature (for example, angles)
(3) The feature is not available at the moment.
(4) You've requested a title, chapter, or scan time that is out of the correct
range.
The disc does not support all the selected functionali-ties.
In this case, some settings you configure on the Setting menu may not
work properly.
Aspect ratio is fixed for DVD disc.
Check whether you selected correct digital output options on the Audio
Output Options menu.
Did you move your DVD Recorder-VCR-VCR suddenly from a cold place to a
warm place? In this case, remove discs and wait for one to two hours with the
power on, and then, insert the disc and try to playback again. It
will work properly when condensations are removed.
Angle operation is available only when the disc con-tains the images
captured at different angles. In this case, an angle mark is displayed on
both the front panel display of your DVD Recorder-VCR-VCR and your TV
screen.
•
Check whether there are damages or foreign materi-als on your disc.
•
Some discs with bad manufacturing quality may not played back.
•
If the scenes change from dark ones to bright ones suddenly, the screen
may tremble vertically temporari-ly, but it is not a fault.
•
Check the video output select switch setting.
Sound languages and subtitle languages are disc-spe-cific.
Only the sound and subtitle languages contained on a DVD disc are
available and displayed on the disc menu.
•
Check whether the component video output switch is set to 480p.
•
Make sure to change the =component video output switch setting when
the disc is stopped.
•
Point the remote control at the remote control sensor on your DVD
recorder. Give a proper distance.
Remove obstacles between your DVD Recorder-VCR-VCR and remote control.
•
Check whether the batteries are depleted.
•
Read the table of contents and then find and read the sections
describing on your problems, and follow the directions given.
•
Turn off and on your DVD Recorder-VCR-VCR.
•
If your problem still persists, contact your Samsung service center
nearby at your location.
Play mode set-
tings is different
from the settings
configured with
the Setting menu.
Cannot change
the aspect ratio.
No audio output.
No video or audio
output. The disc tray
is ejected after 2 to 5
seconds.
Angle operation does
not work during play-
back of a DVD disc.
The disc revolves,
but no image or
bad quality images
are output.
Desired sound
language and
subtitle language
are not played.
No progressive
(480P) output.
icon appears on
the screen.
The remote con-
trol doesn't work.
Other problems
102 - Reference
Reference
SAMSUNG COMBINATION DVD & VCR
LIMITED WARRANTY TO ORIGINAL PURCHASER
This SAMSUNG brand product, as supplied and distributed by Samsung Electronics America, Inc. (SAMSUNG)
and delivered new, in the original carton to the original consumer purchaser, is warranted by SAMSUNG against
manufacturing defects in materials and workmanship for a limited warranty period of:
One (1) Year Parts and Labor*
(*90 Days Parts and Labor for Commercial Use)
This limited warranty begins on the original date of purchase, and is valid only on products purchased and used
in the United States. To receive warranty service, the purchaser must contact SAMSUNG for problem determina-
tion and service procedures. Warranty service can only be performed by a SAMSUNG authorized service cen-
ter. The original dated bill of sale must be presented upon request as proof of purchase to SAMSUNG or
SAMSUNG’s authorized service center. Transportation of the product to and from the service center is the
responsibility of the purchaser.
SAMSUNG will repair or replace this product, at our option and at no charge as stipulated herein, with new or
reconditioned parts or products if found to be defective during the limited warranty period specified above. All
replaced parts and products become the property of SAMSUNG and must be returned to SAMSUNG.
Replacement parts and products assume the remaining original warranty, or ninety (90) days, whichever is
longer.
SAMSUNG ís obligations with respect to software products distributed by SAMSUNG under the SAMSUNG
brand name are set forth in the applicable end user license agreement. Non-SAMSUNG hardware and soft-
ware products, if provided, are on an ”AS IS” basis. Non-SAMSUNG manufacturers, suppliers, publishers, and
service providers may provide their own warranties.
This limited warranty covers manufacturing defects in materials and workmanship encountered in normal, and
except to the extent otherwise expressly provided for in this statement, noncommercial use of this product, and
shall not apply to the following, including, but not limited to: damage which occurs in shipment; delivery and
installation; applications and uses for which this product was not intended; altered product or serial numbers;
cosmetic damage or exterior finish; accidents, abuse, neglect, fire, water, lightning or other acts of nature; use
of products, equipment, systems, utilities, services, parts, supplies, accessories, applications, installations,
repairs, external wiring or connectors not supplied and authorized by SAMSUNG, or which damage this prod-
uct or result in service problems; incorrect electrical line voltage, fluctuations and surges; customer adjustments
and failure to follow operating instructions, cleaning, maintenance and environmental instructions that are cov-
ered and prescribed in the instruction book; product removal or reinstallation; reception problems and distortion
related to noise, echo, interference or other signal transmission and delivery problems. SAMSUNG does not
warrant uninterrupted or error-free operation of the product.
THERE ARE NO EXPRESS WARRANTIES OTHER THAN THOSE LISTED AND DESCRIBED ABOVE, AND NO WAR-
RANTIES WHETHER EXPRESS OR IMPLIED, INCLUDING, BUT NOT LIMITED TO, ANY IMPLIED WARRANTIES OF
MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, SHALL APPLY AFTER THE EXPRESS WARRANTY PERI-
ODS STATED ABOVE, AND NO OTHER EXPRESS WARRANTY OR GUARANTY GIVEN BY ANY PERSON, FIRM OR
CORPORATION WITH RESPECT TO THIS PRODUCT SHALL BE BINDING ON SAMSUNG. SAMSUNG SHALL NOT BE
LIABLE FOR LOSS OF REVENUE OR PROFITS, FAILURE TO REALIZE SAVINGS OR OTHER BENEFITS, OR ANY OTHER
SPECIAL, INCIDENTAL OR CONSEQUENTIAL DAMAGES CAUSED BY THE USE, MISUSE OR INABILITY TO USE THIS
PRODUCT, REGARDLESS OF THE LEGAL THEORY ON WHICH THE CLAIM IS BASED, AND EVEN IF SAMSUNG HAS
BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES. NOR SHALL RECOVERY OF ANY KIND AGAINST SAM-
SUNG BE GREATER IN AMOUNT THAN THE PURCHASE PRICE OF THE PRODUCT SOLD BY SAMSUNG AND CAUS-
ING THE ALLEGED DAMAGE. WITHOUT LIMITING THE FOREGOING, PURCHASER ASSUMES ALL RISK AND LIABIL-
ITY FOR LOSS, DAMAGE OR INJURY TO PURCHASER AND PURCHASERíS PROPERTY AND TO OTHERS AND THEIR
PROPERTY ARISING OUT OF THE USE, MISUSE OR INABILITY TO USE THIS PRODUCT SOLD BY SAMSUNG NOT
CAUSED DIRECTLY BY THE NEGLIGENCE OF SAMSUNG. THIS LIMITED WARRANTY SHALL NOT EXTEND TO ANY-
ONE OTHER THAN THE ORIGINAL PURCHASER OF THIS PRODUCT, IS NONTRANSFERABLE AND STATES YOUR
EXCLUSIVE REMEDY.
Some states do not allow limitations on how long an implied warranty lasts, or the exclusion or limitation of inci-
dental or consequential damages, so the above limitations or exclusions may not apply to you. This warranty
gives you specific legal rights, and you may also have other rights which vary from state to state.
To obtain warranty hardware service, please contact SAMSUNG at:
SAMSUNG CUSTOMER CARE CENTER
400 Valley Road, Suite 201, Mt. Arlington, NJ 07856, Tel: 973-601-6000, Fax: 973-601-6001
1-800-SAMSUNG (1-800-726-7864) and WWW.SAMSUNGUSA.com
Power requirements 120V AC, 60Hz
Power consumption 45 Watts
General Weight 4.1 kg
Dimensions 430mm(W) x 270mm(D) x 79mm(H)
Operating temp. +5°C to +35°C
Other conditions
Keep level when operating. Less than 75% operating humidity
Video (1,2,3) 1.0 V p-p at 75Ωload, sync negative
S-Video input (Y: 1.0Vp-p, C: 0.286Vp-p at 75Ωload)
Input Max. Audio Input Level 2Vrms
DV Input IEEE 1394(4p) compatible jack
Receivable Channels Regular TV broadcasting: VHF (2~13), UHF (14~69)
Cable TV broadcasting: 1~125
Audio Audio input jacks 1, 2
Optical/Coaxial digital audio output support
Min. 100 dB signal-to-noise ratio
Output Max. 0.005% total harmonic distortion (T.H.D)
• at average 1 kHz
Video Video input jacks 1, 2
S-Video output 1, 2 (Y:1.0Vp-p, C:0.286Vp-p at 75Ωload)
Component output
(Y: 1.0Vp-p, Pb: 0.70Vp-p, Pr: 0.70Vp-p at 75Ωload)
Picture Compression format MPEG-II
Audio Compression format Dolby AC-3 256kbps
Recording Quality LP (2 Mbps), SP (4 Mbps), XP (8 Mbps)
DVD Video S/N Ratio Min. 50dB at standard recording
Audio S/N Ratio Min. 75dB
Audio frequency characteristics
20 Hz ~ 20 KHz
Disc Type DVD VIDEO-CD AUDIO CD(CDDA)
Analog Audio Output 48 / 96KHz 44.1KHz 44.1KHz
Digital Audio Output 48KHz 44.1KHz 44.1KHz
Audio Outout
For DVD discs, audio signals recorded at 96kHz sampling frequency are converted into and output as
48kHz digital output.
Specifications
SAMSUNG ELECTRONICS AMERICA, INC.
HEADQUARTERS
105 Challenger Road, Ridgefield Park, N.J.
07660-0511
TEL: 1-800-SAMSUNG
SERVICE DIVISION
400 Valley Road, Suite 201, Mount Arlington, NJ 07856
1-800-SAMSUNG (1-800-726-7864)
WWW.SAMSUNGUSA.com
AK68-00416A
ELECTRONICS