Samsung Electronics Co GTY3400X 850/1900 GSM/GPRS/EDGE/WCDMA/HSPA Module User Manual
Samsung Electronics Co Ltd 850/1900 GSM/GPRS/EDGE/WCDMA/HSPA Module
Contents
- 1. User manual
- 2. Host user manual
User manual
| Download: |  |
| Mirror Download [FCC.gov] | |
| Document ID | 1590893 |
| Application ID | 13LIAUYA8lcu2PeKv1ZHcQ== |
| Document Description | User manual |
| Short Term Confidential | No |
| Permanent Confidential | No |
| Supercede | No |
| Document Type | User Manual |
| Display Format | Adobe Acrobat PDF - pdf |
| Filesize | 54.09kB (676123 bits) |
| Date Submitted | 2011-11-30 00:00:00 |
| Date Available | 2012-05-27 00:00:00 |
| Creation Date | 2011-11-29 20:53:53 |
| Producing Software | Acrobat Distiller 9.3.3 (Windows) |
| Document Lastmod | 2011-11-29 20:53:53 |
| Document Title | Microsoft Word - 08.GT-Y3300 Installation Guide and User Manual_091116.doc |
| Document Creator | PScript5.dll Version 5.2 |
| Document Author: | seunghui |
XG G GT-Y3400 Installation Guide and User ManualG GT-Y3400 Installation Guide and User Manual 07.Feb, 2011 SAMSUNG ELECTRONICS.LTD. XGG SAMSUNG Proprietary-Contents may change without notice This Document can not be used without Samsung's authorization | Samsung Electronics YG G GT-Y3400 Installation Guide and User ManualG Table of contents 1 Introduction 1.1 Overview 1.1.1 Product description 1.1.2 Key features and specifications 2. Mechanical specifications 2.1 Specifications 2.1.1 Mechanical dimensions 2.1.2 Mini PCI Express interface 2.1.3 Antenna connectors 2.1.4 Connector location 2.1.5 Conducted RF measurement 2.1.6 RFx information YGG SAMSUNG Proprietary-Contents may change without notice This Document can not be used without Samsung's authorization | Samsung Electronics ZG G GT-Y3300 Installation Guide and User ManualG 1 Introduction 1.1 Overview This manual is intended to be a complete technical reference and integration guide for the GTY3400 module product. 1.1.1 Product description The GT-Y3400 module described in this manual are PCI Express Mini Cards support WWAN (UMTS/HSPA+/HSUPA & GSM/GRPS/EDGE) connectivity to SAMSUNG notebooks. The module is manufactured and installed by SAMSUNG. It includes diversity receiver and equalization. ZGG SAMSUNG Proprietary-Contents may change without notice This Document can not be used without Samsung's authorization | Samsung Electronics [G G GT-Y3400 Installation Guide and User ManualG 1.1.2 Key features and specifications RF subsystem Platform Band -2G GPRS / EDGE / 3GPP WCDMA HSPA+/HSUPA -ICERA Platform 2G ( 850/900/1800/1900), 3G (BAND1/BAND2/BAND5/BAND8) Size (mm) - 30.0 x 26.8 x 4.72 mm Weight (g) -5.5g Modem -ICERA ICE8060T Memory -MCP 1Gb/512Mb (Nand/SDRAM) RF -ICERA ICE8260B Mini PCI Express Card for Samsung Mini PC. (Half Type) General GSM/GPRS/EDGE/UMTS/HSPA+ & HSUPA Support. Features Main Power is 3.3V and Rated Power Consumption is 900mA. UART, USB2.0 and Nexus IF Support (ICERA IF) Modem Micro processor - High data rate (HSUPA 5.76Mbps, HSPA+ 21Mbps) - Dual antenna Rx diversity - Embedded DXP Processor - Support Multi-mode EDGE,WCDMA,HSPA etc. - Highâspeed USB functionality (2.0) Interface - USIM controller - General Purpose I/O pins, UARTs. [GG SAMSUNG Proprietary-Contents may change without notice This Document can not be used without Samsung's authorization | Samsung Electronics \G G GT-Y3400 Installation Guide and User ManualG 2. Mechanical specifications 2.1 Specifications 2.1.1 Mechanical dimensions Mechanical drawings of the GT-Y3400 module following one. Figure 3.Mechanical dimensions of the GT-Y3400 module 2.1.2 Mini PCI Express interface The card edge connector of the GT-Y3400 module complies with the PCI Express Mini Card specification and mates with a 52 pin Mini PCI Express connector. This specification defines an implementation for small form factor PCI Express cards. The specification uses a qualified sub-set of the same signal protocol, electrical definitions, and configuration definitions as the PCI Express Base Specification, Revision 1.1. Where this specification does not explicitly define PCI Express characteristics, the PCI Express Base Specification governs. The primary differences between a PCI Express add-in card (as defined by the PCI Express Card Electromechanical Specification) and a PCI Express Mini Card add-in card is a unique card form factor optimized for mobile computing platforms and a card-system interconnection optimized for communication applications. Specifically, PCI Express Mini Card add-in cards are smaller and have smaller connectors than standard PCI Express add-in cards. Figure 4 shows a 52 pin PCI Express Mini Card connector. \GG SAMSUNG Proprietary-Contents may change without notice This Document can not be used without Samsung's authorization | Samsung Electronics ]G G GT-Y3400 Installation Guide and User ManualG Figure 4. 52 pin Mini PCI Express connector Figure 5 shows a conceptual drawing of this form factor as it may be installed in a mobile platform. Figure 5 does not reflect the actual dimensions and physical characteristics as those details are specified elsewhere in this specification. However, it is representative of the general concept of this specification to use a single system connector to support all necessary system interfaces by means of a common edge connector. Communications media interfaces may be provided via separate I/O connectors and RF connectors each with independent cables as illustrated in Figure 5. ]GG SAMSUNG Proprietary-Contents may change without notice This Document can not be used without Samsung's authorization | Samsung Electronics ^G G GT-Y3400 Installation Guide and User ManualG Figure 5. PCI Express Mini Card Add-in Card Installed in a Mobile Platform 2.1.3 Antenna connectors The SMD connectors used for the antenna connections on the GT-Y3400 module are delivered by Hirose Ltd. ^GG SAMSUNG Proprietary-Contents may change without notice This Document can not be used without Samsung's authorization | Samsung Electronics _G G GT-Y3400 Installation Guide and User ManualG Figure 6. 2D Detail of the antenna connector Figure 7. Detail of mated height 2.1.4 Connector location The GT-Y3400 module supports receiver diversity. Both require a secondary antenna connection. The antenna connectors can be identified by the letters âMâ for the main antenna and âDâ for the Diversity, printed on the PCB. Diversity Antenna Main Antenna _GG SAMSUNG Proprietary-Contents may change without notice This Document can not be used without Samsung's authorization | Samsung Electronics `G G GT-Y3400 Installation Guide and User ManualG Figure 8. placement of the antenna connectors for the GT-Y3400 2.1.5 Conducted RF measurement HSUPA / HSPA+ / UMTS . Multi-bands variants / 850 / 900 / 1900 / 2100 MHz . UMTS Power Class 3 (24 dBm) . HSUPA mode: 5.76 Mbps: category 6 . HSPA+ mode: 21 Mbps: Category 14 EDGE / GPRS . 850 / 900 / 1800 / 1900 MHz . GSM Power Class 4 (32dBm) for 850 / 900 bands . GSM Power Class 1 (28.5dBm) for 1800 / 1900 bands . EDGE class E2 (26.5 dBm in 850 / 900 bands, 25.8 dBm in 1800 / 1900 bands) . GPRS / EDGE Multi-slot Class 12 (4 slots Rx, 4 slots Tx) 2.1.6 RFx information The RF field strength of the wireless device or devices that may be embedded in your notebook are well below all international RF exposure limits as known at this time. Because the wireless devices (which may be embedded into your notebook) emit less energy than is allowed in radio frequency safety standards and recommendations, manufacturer believes these devices are safe for use. Regardless of the power levels, care should be taken to minimize human contact during normal operation. As a general guideline, a separation of 20 cm (8 inches) between the wireless device and the body, for use of a wireless device near the body (this does not include extremities) is typical. This device should be used more than 20 cm (8 inches) from the body when wireless devices are on and transmitting. This transmitter must not be collocated or operate in conjunction with any other antenna or transmitter. The Part 15 radio device operates on a non-interference basis with other devices operating at this frequency. Any changes or modification to said product not expressly approved by Intel could void the userâs authority to operate this device. For more information, refer the attached document, please. `GG SAMSUNG Proprietary-Contents may change without notice This Document can not be used without Samsung's authorization | Samsung Electronics G 2. 2. Frequency Band Service 80 1900 WCDMA 2.1G Tx ( MH z) 824 ~ 849 1850 ~ 1910 1920 ~ 1980 Rx ( MHz ) 869 ~ 894 1930 ~ 1990 2110 ~ 2170 Band 2.2 Impedance 2.2.1 2.2.1 Normal Value 50 Âą Normal Measuring Method The impedance over the frequency bands shall be as close as possible to 50 after matching. Both free space and talk position are considered. 2. VSWR The impedance matching should be optimized in the more critical talk position. 2.3.1 Maximum values in free space SERVICE VSWR 2.3.2 80 1900 WCDMA 2.1G TX Rx TX RX Tx Rx 2.7 2.0 2.9 3.4 2.7 1.9 Measuring Method A 50 coaxial cable is connected(soldered) to the 50 point, at the duplexfilter on the main PCB. The connection of the coaxial cable shall be done to introduce a minimum of mismatch. As much as possible the coaxial cable arrangement shall prevent influences from induced currents on the cable. In the other end, the coaxial cable is connected to a network analyzer. The measurement is performed at room temperature. The handset, including the PCB, must not in any significant way differ from the mass production, i.e. the antenna feeding network has to be equivalent to the feeding network in mass production. The specification shall be met in the entire frequency band. Confidential Proprietary 4/16 G 2.4 Gain(dBi) 2.4.1 Measuring Method The connection is done according to 2.3.2. Radiation patterns are measured at 3 different Plane The antenna measured according to the figure 1 below. GG ÂÂÂÂÂÂGX Confidential Proprietary 5/16 G 2-4-2. Radiation PatternGtÂÂÂÂÂÂG G G G G G G yÂÂÂÂÂÂÂÂGwÂÂÂÂÂÂGtÂÂÂÂÂÂGÂÂÂÂÂÂÂÂÂGÂÂGÂÂÂÂÂÂYOÂPSGÂÂÂÂÂÂYOÂPS zÂÂÂÂGÂÂÂGyÂÂÂÂGÂÂÂGÂÂG\ÂiGSZWÂiOÂÂÂÂPU CWG ZG YG XG Figure 2 (a) CWG E1G CWG E2G mÂÂÂÂÂGYGOÂP Confidential Proprietary 6/16 IC: 649E-GTY3400X Operation is subject to the following two conditions: (1) this device may not cause interference, and (2) this device must accept any interference, including interference that may cause undesired operation of the device. Le present appareil est conforme aux CNR d'Industrie Canada applicables aux appareils radio exempts de licence. L'exploitation est autorisee aux deux conditions suivantes : (1) l'appareil ne doit pas produire de brouillage, et (2) l'utilisateur de l'appareil doit accepter tout brouillage radioelectrique subi, meme si le brouillage est susceptible d'en compromettre le fonctionnement. * Information for OEM integrator The OEM integrator has to be aware not to provide information to the end user regarding how to install or remove this RF module in the user manual of the end product. The user manual which is provided by OEM integrators for end users must include the following information in a prominent location. â To comply with FCC RF exposure compliance requirements, the antenna used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter.â Label for end product must include âContains FCC ID: A3LGTY3400X, IC: 649E-GTY3400X" or â A RF transmitter inside, FCC ID: A3LGTY3400X, IC: 649E-GTY3400Xâ. * Information pour les OEM intĂŠgrateur L'intĂŠgrateur OEM doit ĂŞtre conscient de ne pas fournir des informations Ă l'utilisateur final concernant la façon d'installer ou de retirer ce module RF dans le manuel utilisateur du produit final. Le manuel de l'utilisateur qui est fourni par les intĂŠgrateurs OEM pour les utilisateurs finaux doivent inclure les renseignements suivants dans un endroit bien en vue. ÂŤPour se conformer aux exigences de conformitĂŠ d'exposition RF de la FCC, l'antenne utilisĂŠe pour ce transmetteur doit ĂŞtre installĂŠ pour fournir une distance de sĂŠparation d'au moins 20 cm de toute personne et ne doit pas ĂŞtre co-localisĂŠs ou fonctionnant en conjonction avec une autre antenne ou transmetteur. " Ătiquette pour le produit final doit inclure "Contient FCC ID: A3LGTY3400X, IC: 649EGTY3400X" ou "A l'intĂŠrieur du transmetteur RF, FCC ID: A3LGTY3400X, IC: 649E-GTY3400X".
Source Exif Data:
File Type : PDF File Type Extension : pdf MIME Type : application/pdf PDF Version : 1.5 Linearized : Yes Author : seunghui Create Date : 2011:11:29 20:53:53-08:00 Modify Date : 2011:11:29 20:53:53-08:00 XMP Toolkit : Adobe XMP Core 4.2.1-c043 52.372728, 2009/01/18-15:08:04 Producer : Acrobat Distiller 9.3.3 (Windows) Creator Tool : PScript5.dll Version 5.2 Format : application/pdf Title : Microsoft Word - 08.GT-Y3300 Installation Guide and User Manual_091116.doc Creator : seunghui Document ID : uuid:34523dae-ea28-4531-8987-3faac59065b0 Instance ID : uuid:06662b8c-602c-47fd-ad64-d0498fb2cb17 Page Count : 13EXIF Metadata provided by EXIF.tools