Samsung Electronics Co HTBD8200 HOME THEATER SYSTEM User Manual HT BD8200 XAA 0530 1 indd

Samsung Electronics Co Ltd HOME THEATER SYSTEM HT BD8200 XAA 0530 1 indd

Contents

USERS MANUAL 2

Download: Samsung Electronics Co HTBD8200 HOME THEATER SYSTEM User Manual HT BD8200 XAA 0530 1 indd
Mirror Download [FCC.gov]Samsung Electronics Co HTBD8200 HOME THEATER SYSTEM User Manual HT BD8200 XAA 0530 1 indd
Document ID1138306
Application IDa18LWaa7M9BzVLojgu6z9Q==
Document DescriptionUSERS MANUAL 2
Short Term ConfidentialNo
Permanent ConfidentialNo
SupercedeNo
Document TypeUser Manual
Display FormatAdobe Acrobat PDF - pdf
Filesize264.17kB (3302166 bits)
Date Submitted2009-07-14 00:00:00
Date Available2009-08-28 00:00:00
Creation Date2009-07-03 12:08:29
Producing SoftwareAcrobat Distiller 7.0 (Windows)
Document Lastmod2009-07-03 12:08:33
Document TitleHT-BD8200_XAA_0530-1.indd
Document CreatorPScript5.dll Version 5.2
Document Author: Administrator

Connections
CONNECTING THE FM ANTENNA
1. Connect the FM antenna supplied to the FM 75Ω COAXIAL Jack.
2. Slowly move the antenna wire around until you find a location where reception is good, then fasten it
to a wall or other rigid surface.
FM Antenna
(supplied)
M
This unit does not receive AM broadcasts.
COOLING FAN
The cooling fan supplies cool air to the unit to prevent overheating.
Please observe the following cautions for your safety.
• Make sure the unit is well-ventilated. If the unit has poor ventilation, the temperature inside the unit may rise
and may damage it.
• Do not obstruct the cooling fan or ventilation holes. (If the cooling fan or ventilation holes are covered with a
newspaper or cloth, heat may build up inside the unit and fire may result.)
30
HT-BD8200_XAA_0530-1.indd 30
2009-05-30
2:02:01
ENG
Basic functions of your Blu-ray Home Theater
This section introduces basic playback functions and playback by disc type.
BEFORE PLAYING
● BASIC FUNCTIONS
• Turn on your TV and set it to the correct Video Input (the input the Blu-ray Home Theater is connected to).
• If you connected an external Audio System, turn on your Audio System and set it to the correct Audio Input.
After plugging in the player, the first time you press the
POWER button, this screen comes up:
If you want to select a language, press a NUMBER button.
(This screen will only appear when you plug in the player for
the first time.) If the language for the startup screen is not set,
the settings may change whenever you turn the power on or
off. Therefore, make sure that you select the language you
want to use. Once you select a menu language, you can
change it by pressing the STOP () button on the front panel
of the unit for more than 5 seconds with no disc in the unit.
Then the MENU LANGUAGE SELECTION window appears
again where you can reset your preferred language.
M
MENU LANGUAGE SELECTION
Press 1 for English
Pulsar 2 para Español
Touche 3 pour Français
Macrovision : BSS41
Discs which can be played on this player (For the following discs, the ability to play back
may depend on recording conditions.)
• BD-ROM
• BD-RE
• BD-R
• DVD-R
• DVD-RW (V mode)
• CD-RW/CD-R
• The unit may not play certain CD-RW/CD-R and DVD-R due to the disc type or
recording conditions.
 Discs which cannot be played on this player.
• HD DVD
• DVD+RW
• DVD-ROM
• DVD-RAM
• CD-ROM
• CVD
• Super Audio CD(except CD layer)
• DVD+R
• CDV
• CD-I
• CDGs play audio only, not graphics.
 Blu-ray is a new and evolving format. Accordingly, disc compatibility issues with new and
existing format discs are possible. Not all discs are compatible and not every disc will
playback.
For additional information, refer to the Disc Type and Characteristics and Compliance and
Compatibility Notice sections of this Manual. If you encounter compatibility problems,
please contact SAMSUNG customer care center.
31
HT-BD8200_XAA_0530-1.indd 31
2009-05-30
2:02:01
Basic functions of your Blu-ray Home Theater
ON-SCREEN MENU NAVIGATION
System Information
System
Time Zone
Clock Set
Language
Video
Music
Photo
Setup
Audio
Power On/Off sound
Subtitle
BD Data Management
DivX Subtitle
DivX(R) Registration
Disc Menu
DivX(R) Deactivation
Menu
System Update
Audio
Display
Dynamic Compression
TV Aspect
AV Sync
Movie Frame (24 Fs)
Test Tone
Resolution
Speaker Distance
Progressive Mode
Sound Edit
Still Mode
Screen Message
Light Effect
HDMI
Network
Anynet + (HDMI-CEC)
Network Selection
Cable Network
Wireless Network
HDMI Format
BD Wise
HDMI Audio
Proxy
NTP Server
Network Connection Test
BD-LIVE Internet Connection
Parental
Parental Lock
Rating Level
New Password
Netflix
e-Contents
Pandora
PLAYING A DISC
1. Press EJECT button to open the compartment.
2. Load a disc vertically into the disc slot.
• Place a disc gently into the slot with the disc’s label facing up.
• Playback starts automatically.
M




32
HT-BD8200_XAA_0530-1.indd 32
When you stop disc play, the player remembers where you stopped, so when you press
PLAY button again, it will pick up where you left off. This is called the "Resume" function.
With some Blu-ray discs(BD-J), this function may not work.
Press the STOP button twice during playback to disable the Resume function.
To pause the playback, press the PAUSE button during playback.
To resume, press the PLAY button.
If the player is left in the stop mode more than 5 minutes without any user interface, a
screen saver will appear on your TV. If the player is left in the screen saver mode for more
than 30 minutes, the power will automatically turn off except during playback of an CD-DA
(Automatic Power-Off Function).
If no buttons are pressed on the unit or remote control for more than 5 minutes when the
unit is in Pause mode, operation will stop (except for some Blu-ray Discs).
2009-05-30
2:02:02
ENG
SETTING THE SOUND
Setting the Power On / Off Melody Sound
A Melody sound can be set so it is heard each time you turn the player on or off.
1. With the unit in Stop mode, press the MENU button.
2. Press the ▲▼ buttons to select Setup, then press the
ENTER or ► button.
4. Press the ▲▼ buttons to select Power On/Off sound,
then press the ENTER or ► button.
Time Zone
Photo
DVD
Setup
Clock Set
Language
Power On/Off sound : On On
Off
BD Data Management
Audio
DivX(R) Registration
Display
DivX(R) Deactivation
HDMI
System Update
System
◄
►
● BASIC FUNCTIONS
3. Press the ▲▼ buttons to select System, then press the
ENTER or ► button.
System Information
Music
Network
Parental
5. Press the ▲▼ buttons to select On or Off, then press the
ENTER or ► button.
6. Press the MENU button to exit the setup menu.
USING THE SEARCH AND SKIP FUNCTIONS
During play, you can search quickly through a chapter or track, and use the skip function to jump to the next selection.
Searching through a Chapter or Track
hgfZCV
During playback, press the SEARCH (
) button.
Each time you press the SEARCH button, the playback speed will change as follows.
BD-ROM, BD-RE, BD-R, DVD-VIDEO,
DVD-RW, DVD-R
 X 2   X 4   X 8   X 16   X 32   X 128
 X 2   X 4   X 8   X 16   X 32   X 128
• You can scan the program in reverse.
• To return to normal speed playback, press the PLAY button.
M
No sound is heard during search mode.
hgfZCV
Skipping Tracks
During playback, press the SKIP (
) button.
) button, it moves to the next chapter.
When playing a Blu-ray Disc/DVD, if you press the SKIP (
) button, it moves to the beginning of the chapter. One more press makes it
If you press the SKIP (
move to the beginning of the previous chapter.
33
HT-BD8200_XAA_0530-1.indd 33
2009-05-30
2:02:02
Basic functions of your Blu-ray Home Theater
SLOW MOTION PLAY/STEP MOTION PLAY
Slow Motion Play
hgfZCV
In pause or step mode, press the SLOW button on the
remote control for Slow Motion play.
• If you press the SLOW button,  1/8  1/4  1/2
• To return to normal speed playback, press the
PLAY ( ) button.
M
This (
) icon indicates an invalid button press.
 No sound is heard during slow mode.
 Slow motion operates only in the forward direction.
Step Motion Play
hgfZCV
Press the STEP button on the remote control during play for Step
Motion play.
• Each time the button is pressed a new frame will appear.
• When the STEP button is pressed, the next frame will be
activated.
• Press the PLAY ( ) button to resume normal play.
M
No sound is heard during step mode.
 Step motion operates only in the forward direction.
34
HT-BD8200_XAA_0530-1.indd 34
2009-05-30
2:02:04
ENG
System setup
SETTING THE CLOCK
Choose your time zone
1. With the unit in Stop mode, press the MENU button.
Music
Photo
DVD
Setup
3. Press the ▲▼ buttons to select System, then press the
ENTER or ► button.
4. Press the ▲▼ buttons to select Time Zone, then press the
ENTER or ► button.
5. Use the ◄ ► button to place the cursor to the appropriate
time zone for your area and press the ENTER button.
System Information
System
◄
Time Zone
Clock Set
Audio
Power On/Off sound : On
Display
BD data management
HDMI
DivX(R) Registration
Network
DivX(R) Deactivation
Parental
System Update
Music
Time Zone
Photo
DVD
Setup
◄
System Information
System Setup
◄
Time Zone
►
Language Setup
Clock Set
Audio Setup
Power On/Off sound : On
Display Setup
BD data management
HDMI Setup
DivX(R) Registration
Network SetupGMT + 00:00
DivX(R) Deactivation
London, Lisbon
Parental Setup
System Update
Save
M
►
Language
● SYSTEM SETUP
2. Press the ▲▼ buttons to select Setup, then press the
ENTER or ► button.
►
Return
To set the time automatically, set the NTP server to On (see page 53).
Set the clock
To setup, follow steps 1 through 3 above.
Music
4. Press the ▲▼ buttons to select Clock Set, then press the
ENTER or ► button.
System Information
Photo
DVD
Setup
Time Zone
System
◄
Clock Set
Language
Power On/Off sound : On
Audio
BD data management
Display
DivX(R) Registration
HDMI
DivX(R) Deactivation
Network
System Update
►
Parental
5. Press the ◄ ► buttons to move to “da.”(date), “hr” (hour),
“min” (minute). Set the date and time by pressing the ▲▼
buttons, then press the ENTER button.
Music
System Information
Photo
DVD
Setup
Time Zone
Clock Set
◄
Clock Set
System
da.
hr.
min.
Power On/Off sound : On
Language
01 management
01
Audio JAN/01/2009 BD data
Display Thursday
HDMI
Network
►
DivX(R) Registration
DivX(R) Deactivation
Save
System UpdateReturn
Parental
35
HT-BD8200_XAA_0530-2.indd 35
2009-05-30
2:28:33
Language setup
SETTING UP THE LANGUAGE OPTIONS
Once you set the audio, subtitle, disc menu and player menu language options, they will be applied automatically
every time you watch a movie.
If you want to choose a different audio and subtitle language while playing a disc, you can
also use the disc menu to make the selection.
1. With the unit in Stop mode, press the MENU button.
2. Press the ▲▼ buttons to select Setup, then press the
ENTER or ► button.
Music
Photo
DVD
Setup
System
◄
Language
◄
M
Audio
Display
HDMI
Network
Parental
3. Press the ▲▼ buttons to select Language, then press
the ENTER or ► button.
Language setup menu will be displayed.
Music
Photo
DVD
Setup
System
Audio
: Original
Audio
Subtitle
: Auto
Display
DivX Subtitle
: Western
HDMI
Disc Menu
: English
Network
Menu
: Auto
Audio
: Original
Original
English
: Auto
Français
: Western
Deutsch
: English
Español
: Auto
Italiano
Language
◄
►
Parental
4. Press the ▲▼ buttons to select the desired language
option, press the ENTER or ► button.
Music
Photo
DVD
Setup
System
Language
◄
Audio
Subtitle
Display
DivX Subtitle
HDMI
Disc Menu
Network
Menu
►
Parental
• Audio : For the disc audio language.
• Subtitle : For the disc subtitles.
• DivX Subtitle : For the DivX subtitle language by region.
Western
Afrikaans, Basque, Catalan, Danish, Dutch, English, Faeroese, Finnish, French, German, Icelandic,
Indonesian, Italian, Malay, Norwegian, Portuguese, Spanish, Swahili, Swedish
Central
English, Albanian, Croatian, Czech, Hungarian, Polish, Romanian, Serbian(Latin), Slovak, Slovenian
Greek
English, Greek
Cyrillic
English, Azeri, Belarusian, Bulgarian, Kazakh, Macedonian, Russian, Serbian, Tatar, Ukrainian, Uzbek
• Disc Menu : For the disc menu contained on the disc
• Menu : For the on-screen menu of your Blu-ray Home Theater.
5. Press the ▲▼ buttons to select the desired language, then press the ENTER button.
M
36
HT-BD8200_XAA_0530-2.indd 36
Press the RETURN or ◄ button to return to the previous menu. Press the MENU button to
exit the menu.
 The selected language will only appear if it is supported on the disc.
 If the subtitle language is displayed in broken fonts, change DivX Subtitle to the appropriate region.
If is still does not work, the format is not supported.
2009-05-30
2:28:43
ENG
Audio setup
SETTING UP THE SPEAKER OPTIONS
Dynamic Compression
Music
System
Photo
DVD
Setup
Language
Display
Dynamic Compression : On On
Off
AV Sync
: 50msec
HDMI
Test Tone
Audio
◄
Network
►
Speaker Distance
Parental
Sound Edit
● AUDIO SETUP
This is only active when a Dolby Digital signal is detected.
• On : When Movie soundtracks are played at low volume or
from smaller speakers, the system can apply appropriate
compression to make low-level content more intelligible and
prevent dramatic passages from getting too loud.
• Off : You can enjoy the movie with the standard Dynamic
Range.
AV Sync
Video may look slower than the audio when the player is
Music
System
connected to a digital TV. If this occurs, adjust the audio
delay time to match the video.
• You can set the audio delay time between 0 ms and 300 ms.
Set it to the optimal status.
Photo
DVD
Setup
Dynamic Compression : On
Language
Audio
◄
AV Sync
Display
Test Tone
HDMI
Speaker Distance
Network
: 50msec
0msec
25msec
50msec
75msec
Sound Edit
100msec
Parental
125msec
Setting the Test Tone
Use the Test Tone feature to check the speaker connections.
Music
System
1. With the unit in Stop mode, press the MENU button.
2. Press the ▲▼ buttons to select Setup, then press the
ENTER or ► button.
Photo
DVD
Setup
Language
Audio
◄
AV Sync
HDMI
Test Tone
Network
3. Press the ▲▼ buttons to select Audio, then press the
ENTER or ► button.
• Audio setup menu will be displayed.
►
: 50msec
Speaker Distance
Parental
Sound Edit
4. Press the ▲▼ buttons to select Test Tone, then press the
ENTER or ► button.
5. Press the RED(A) button
• A test tone will be sent to L  R  LFE in order so you
can make sure the speakers are set up correctly.
Dynamic Compression : On
Display
Music
Dynamic Compression : On
System
Photo
DVD
Setup
Language
Audio
AV Sync
◄
: 50msec
Test Tone
Display
Speaker Distance
HDMI
Sound Edit
►
Network
Parental
6. To end the test tone, press the RED (A) button again.
M
Press the RETURN button to return to the previous menu.
 When playing a BD/DVD or CD, this will work only in Stop mode.
 Use this function to check that each speaker is correctly connected and that there is no
problem.
 When HDMI AUDIO is on (audio is produced through TV speakers), the TEST TONE function is
not available.
37
HT-BD8200_XAA_0530-2.indd 37
2009-05-30
2:28:46
Audio setup
SETTING UP THE SPEAKER OPTIONS
Setting the Speaker Distance
If the speakers cannot be placed at equal distances from the listening position, you can adjust the delay
time of the audio signals from the front, subwoofer speakers.
1. With the unit in Stop mode, press the MENU button.
Music
System
2. Press the ▲▼ buttons to select Setup, then press the
ENTER or ► button.
Photo
DVD
Setup
3. Press the ▲▼ buttons to select Audio, then press the
ENTER or ► button.
Language
Audio
◄
Dynamic Compression : On
Display
AV Sync
HDMI
Test Tone
Network
►
: 50msec
Speaker Distance
Parental
Sound Edit
• Audio setup menu will be displayed.
4. Press the ▲▼ buttons to select Speaker Distance,
then press the ENTER or ► button.
5. Press the ▲▼ buttons to select the desired Speaker,
then press the ◄► buttons to set the Speaker Distance.
Dynamic Compression : On
Music
Photo
DVD
Setup
System
AV Sync
Language
Test Tone
Audio
◄
Display
: 50msec
Speaker Distance
►
Sound Edit
HDMI
Network
• You can set the Speaker Distance between 1ft(0.3m) and 30ft(9m).
Parental
6. When done, use the ▲▼◄► buttons to select Save,
then press the ENTER button.
If you don’t want to save your settings, use the ▲▼◄►
buttons to select Cancel, then press the ENTER button.
M
Press the RETURN button to return to the previous menu.
Setting the Sound Edit
You can adjust the balance and level for each speaker.
1. With the unit in Stop mode, press the MENU button.
2. Press the ▲▼ buttons to select Setup, then press the
ENTER or ► button.
3. Press the ▲▼ buttons to select Audio, then press the
ENTER or ► button.
• Audio setup menu will be displayed.
Music
System
Photo
DVD
Setup
Language
Audio
◄
Dynamic Compression : On
Display
AV Sync
HDMI
Test Tone
Network
►
: 50msec
Speaker Distance
Parental
Sound Edit
38
HT-BD8200_XAA_0530-2.indd 38
2009-05-30
2:28:51
4. Press the ▲▼ buttons to select Sound Edit,
then press the ENTER or ► button.
5. Press the ▲▼ buttons to select the desired Speaker,
then press the ◄► button to adjust the settings.
AV Sync
Music
Photo
M
Speaker Distance
Language
Audio
◄
Sound Edit
►
Display
HDMI
Network
Parental
● AUDIO SETUP
6. When done, use the ▲▼◄► buttons to select Save,
then press the ENTER button.
If you don’t want to save your settings, use the ▲▼◄►
buttons to select Cancel, then press the ENTER button.
Setup
: 50msec
Test Tone
System
DVD
ENG
Setting the Sound Edit
Press the RETURN butt on to return to the previous menu.
Adjusting Front Speaker Balance
• You can select between 0, -6, and OFF.
• The volume decreases as you move closer to –6.
Adjusting Subwoofer Speaker Level
• The volume level can be adjusted in steps from +6dB to 6dB.
• The sound gets louder as you move closer to +6dB and quieter as you get closer to -6dB.
V-SOUND (Virtual Sound)
Produces realistic sound through 2-channel audio with the aid
of virtual effects, this gives the user thefeeling they are listening
to 5.1 channel audio.
Press the V-SOUND button.
• Each time the button is pressed, the selection changes as
follows :
V.SOUND ON  V.SOUND OFF
DSP Function
Press the DSP button.
• Each time the button is pressed, the selection changes as
follows:
SMART SOUND  AUDIO UPSCALING 
POWER BASS  DSP MODE OFF
• SMART SOUND : This will regulate and stabilize the
volume level against a drastic volume change when
changing channels or during a scene transition.
• AUDIO UPSCALING : This also helps enhance your sound experience (ex. mp3 music).
You can upscale your MP3 level sound(24 kHz, 8bit) to CD level sound(44.1 kHz, 16bit).
• POWER BASS : POWER BASS function stresses low tones providing thudding sound effects.
39
HT-BD8200_XAA_0530-2.indd 39
2009-05-30
2:28:55
Display setup
SETTING UP THE DISPLAY OPTIONS
This function allows you to setup the TV screen settings. This function depends on the disc or TV type. It may not
work with some discs or TVs.
1. With the unit in Stop mode, press the MENU button.
2. Press the ▲▼ buttons to select Setup, then press the
ENTER or ► button.
System
Music
Language
Photo
DVD
Setup
Audio
◄
Display
►
HDMI
3. Press the ▲▼ buttons to select Display, then press the
ENTER or ► button.
Video setup menu will be displayed.
Network
Parental
4. Press the ▲▼ buttons to select the desired display option
from the options on the following pages.
5. Press the ▲▼ buttons to select the desired sub-menu
item from a video display option, then press the ENTER
button.
Music
Photo
DVD
Setup
6. Each video option is described in detail below.
System
Language
Audio
Display
◄
TV Aspect
Movie Frame (24 Fs) : Off
Network
Resolution
: 1080p
Parental
Progressive Mode
: Auto
Still Mode
M
: 16:9 Normal
HDMI
Press the RETURN or ◄ button to return to the previous
menu. Press the MENU button to exit the menu.
►
: Auto
Screen Message
: On
Light Effect
: In Standby
TV Aspect
Depending on the type of television you have, you may want to adjust the screen setting. (aspect ratio)
• 4:3 Letter Box :
Select when you want to see the total 16:9
ratio screen a Blu-ray Disc/DVD supplies,
even though you have a TV with a 4:3 ratio
screen. Black bars will appear at the top
and bottom of the screen.
System
Music
Photo
DVD
Setup
Language
Audio
Display
HDMI
Network
Parental
• 4:3 Pan-Scan :
Select when you want to see the 16:9 video
supplied by the Blu-ray Disc/DVD without the
black bars on top and bottom, even though you
have a TV with a 4:3 ratio screen(extreme left and
right portion of the movie picture will be cut off).
◄
TV Aspect
: 16:94:3
Normal
Letter Box
Movie Frame (24 Fs) : Off 4:3 Pan-Scan
16:9
Resolution
: 1080p Wide
16:9 Normal
Progressive Mode : Auto
Still Mode
►
: Auto
Screen Message
: On
Light Effect
: In Standby
• 16:9 Wide :
You can view the full 16:9 picture on your widescreen TV.
• 16:9 Normal :
Certain movies(4:3 source) will be displayed in 4:3 Pillarbox (black bars on sides of picture)
if 16:9 normal is selected.
M
Depending on the disc type, some aspect ratios may not be available.
 If you select an aspect ratio which is different than the aspect ratio of your TV screen, then
the picture might appear to be distorted.
40
HT-BD8200_XAA_0530-2.indd 40
2009-05-30
2:28:57
Movies are usually filmed at 24 frames per second. Some
Blu-ray Discs have the capability of playing back at this frame
rate. Setting the Movie Frame (24Fs) feature to ON allows you
to adjust the Blu-ray Home Theater's HDMI output to 24
frames per second for improved picture quality.
ENG
Movie Frame (24 Fs)
System
Music
Photo
DVD
Setup
Language
Audio
TV Aspect
Display
◄
: 16:9 Normal
Movie Frame (24 Fs) : Off On
HDMI
Resolution
Network
Progressive Mode
: Auto
Parental
Still Mode
: Auto
Screen Message
: On
Light Effect
: In Standby
You can enjoy the Movie Frame (24Fs) feature only on a TV
supporting this frame rate.
►
Off
: 1080p
● DISPLAY SETUP
This menu can only be selected in 1080i or 1080p HDMI
output resolution modes.
Depending on the disc, two types of frame rates may be included: Movie material (24 frame) and Video
material (30 frame). When the setting switches between Movie (24 frame) and Video (30 frame),
the screen may blink for a few seconds.
Resolution
Sets the output resolution of the HDMI and Composite video
signal.
• The number in 480i, 480p, 720p, 1080p and 1080i
indicates the number of lines of video. The i and p indicate
interlace and progressive scan, respectively.
- BD Wise : Automatically sets the optimal resolution when
connected via HDMI to a TV with the BD Wise
feature. (The BD Wise menu item appears only
if BD Wise is set to On.)
- 1080p : Outputs 1080 lines of progressive video (HDMI only).
- 1080i : Outputs 1080 lines of interlaced video.
- 720p : Outputs 720 lines of progressive video.
- 480p : Outputs 480 lines of progressive video.
- 480i : Outputs 480 lines of interlaced video (Composite only).
Music
Photo
DVD
If the connected TV does not support Movie Frame or the
selected resolution, you will see the following message:
If you select Yes and the resolution is not supported, the TV's
screen will be blank. Please wait for 15 seconds and
the resolution will revert to the previous value automatically.
Setup
System
Language
: 16:9 Normal
Movie Frame (24 Fs) : Off
Resolution
: 1080p
1080p
HDMI
Progressive Mode
Network
Still Mode
Parental
Screen Message
1080i
: Auto
720p
: Auto
: On 480p
Light Effect
480i
: In Standby
TV Aspect
: 16:9 Normal
Display
◄
System
Music
Photo
DVD
Setup
Language
Audio
Movie after
Framethe(24selection,
Fs) : Off
If no pictures are shown
◄ 15 Resolution
please wait for
seconds. And then, : 1080p
Display
the resolution will be reverted
Progressive Mode : Auto
HDMI
to the previous value automatically.
Still Mode
: Auto
Network
Would you like to make a selection?
Screen Message
: On
Parental
Yes
M
TV Aspect
Audio
Light Effect
No
►
: In Standby
If the screen is blank, press and hold the STOP () button on the front of the player for
more than 5 seconds (no disc inserted). All settings are restored to the factory default.
Follow the steps on the previous page to access each mode and select the Display Setup
that your TV will support.
 When the factory default settings are restored, all the user data stored in the BD data will
be deleted.
41
HT-BD8200_XAA_0530-2.indd 41
2009-05-30
2:29:01
Display setup
SETTING UP THE VIDEO DISPLAY/OUTPUT OPTIONS
Resolution according to the output mode
• Blu-ray Disc playback
Output
HDMI
COMPOSITE
1080p, Movie Frame(24Fs) off
1080p@60F
480i
1080p/1080i, Movie Frame (24Fs) on
1080p@24F
480i
1080i, Movie Frame (24Fs) off
1080i
480i
720p
720p
480i
480p
480p
480i
480i
480p
480i
HDMI
COMPOSITE
1080p
1080p@60F
480i
1080i
1080i
480i
720p
720p
480i
480p
480p
480i
480i
480p
480i
Setup
• DVD playback
Output
Setup
M
This player has the HDMI Auto Detect Feature. When the player is first connected to a TV
via HDMI, the player's output will be set automatically to HDMI.
 If the HDMI Auto Detection feature does not work, you can't select the 1080p resolution or
Movie Frame (24Fs).
 The Blu-ray Disc must have the 24 frame feature in order to use the Movie Frame (24Fs)
mode.
42
HT-BD8200_XAA_0530-2.indd 42
2009-05-30
2:29:04
The Progressive Mode helps to improve picture quality when
viewing 480i resolution DVD discs.
• Auto : Select this to have the player automatically set the
best picture for the DVD you're watching.
• Video : Select this for the best picture from Concert or TV
show DVDs.
Music
Photo
DVD
Setup
ENG
Progressive Mode
System
TV Aspect
: 16:9 Normal
Movie Frame (24 Fs) :
Off
Resolution
: 1080p
Language
Audio
Display
◄
HDMI
Network
Progressive Mode : PCMAuto
Still Mode
: AutoVideo
Screen Message
Light Effect
Parental
►
: On
: In Standby
● DISPLAY SETUP
Frame & Field bar
Still Mode
Set the Auto, Field or Frame setting for the best possible still
picture (pause mode) from a DVD.
• Auto: Select this setting to have the player automatically
display the best Still picture depending on the content.
• Field Mode: Select this when pausing a scene with a lot of
action.
• Frame Mode: Select this to increase the resolution of the
Still picture.
Music
Photo
DVD
Setup
System
Movie Frame (24 Fs) : Off
Language
Audio
Display
◄
Resolution
: 1080p
Progressive Mode
: Auto
Still Mode
: Auto
Auto
: On Field
Frame
: In Standby
HDMI
Screen Message
Network
Light Effect
Parental
Screen Message
• On : Displays messages related to operation mode.
• Off : Does not display messages related to operation mode.
Music
Photo
DVD
Setup
System
Resolution
Language
Audio
Display
◄
HDMI
: 1080p
Progressive Mode
: Auto
Still Mode
: Auto
Screen Message
Light Effect
On
Off
: In Standby
Network
Parental
Light Effect
Light Effect mode adds moody lighting under the main unit.
•
•
•
•
Off : Always off
In Standby : Lights on while in stand-by
Playing : Off in stand-by mode, lights on while playing
Always : Always on
Music
Photo
DVD
Setup
System
Language
Audio
Display
HDMI
Network
Parental
◄
Progressive Mode
: Auto
Still Mode
: Auto
Screen Message
: On
Light Effect
: In Standby
Off
In Standby
Playing
Always
43
HT-BD8200_XAA_0530-2.indd 43
2009-05-30
2:29:04
HDMI setup
SETTING UP THE HDMI SETUP OPTIONS
1. With the unit in Stop mode, press the MENU button.
3. Press the ▲▼ buttons to select HDMI, then press the
ENTER or ► button.
HDMI setup menu will be displayed.
Audio
Photo
Display
DVD
Setup
◄
HDMI
◄
2. Press the ▲▼ buttons to select Setup, then press the
ENTER or ► button.
Language
Music
Network
Parental
4. Press the ▲▼ buttons to select the desired display option,
then press the ENTER or ► button.
M
Press the RETURN or ◄ button to return to the previous menu. Press the MENU button to exit the menu.
Anynet+ (HDMI-CEC)
Samsung products only
What is Anynet+?
Anynet+ is a convenient function that offers linked operations with other Samsung products with the
Anynet+ feature.
You can operate this unit using a Samsung TV remote control or power on your Samsung TV and Home
theater and start disc playback simply by pressing the PLAY button on the TV’s remote.
M
This function is not available if the HDMI cable does not support CEC.
To use Anynet+
1. Connect the Blu-ray Home Theater to a Samsung TV with an HDMI cable. (See pages 22~23)
2. Set the Anynet+ function on your TV. (See the TV instruction manual for more information.)
Anynet+ Functions
• One touch play
You can power on your Samsung TV and Home Theater, and play the disc in this unit simply by
pressing the PLAY button on the TV’s remote.
• One touch watching
Select “Watching Blu-ray Home Theater” or “Connected to Blu-ray Home Theater” (depending on
your TV's menu) in the Anynet+ menu on the TV. The Blu-ray Home Theater will automatically turn on
and the TV will be switched to HDMI mode.
• Remote control Link
You can operate this player with your Samsung TV remote control.
• Available buttons on the Samsung TV remote: These buttons work the same as this Blu-ray Home
Theater's remote control.
- Playback control buttons :
- Menu operation button :
- Numeric buttons : ~
- Color buttons :
44
HT-BD8200_XAA_0530-2.indd 44
2009-05-30
2:29:09
● HDMI SETUP
M
ENG
TV Anynet+ Menu
When you press the Anynet+ button on your Samsung TV's remote
control, the following On-Screen Display (OSD) will be shown.
THEATER
View
TV
• Blu-ray Home Theater Menu
Select Device
Record
- When playing a movie : brings up the disc’s menu (same
Menu on Device
as DISC MENU button on the Blu-ray Home Theater’s
Device Operation
Receiver : Off
remote control)
Setup
- In Stop mode : brings up the SETUP menu (same as the
Move
Enter
Exit
MENU button on the Blu-ray Home Theater’s remote
control.)
• Blu-ray Home Theater Operation Menu
- When playing a DVD VIDEO, DVD-RW/-R, BD-ROM, BD-RE :
shows INFO OSD (same as INFO button on the player's remote control)
These menus may look different depending on your Samsung TV.
HDMI Format
You can optimize the HDMI output for connection to a TV or
Monitor.
• TV : Select if connected to a TV via HDMI.
• Monitor : Select if connected to a Monitor via HDMI.
If the player is connected to a TV, the Monitor
option is unavailable.
M
Language
Music
Audio
Photo
Display
DVD
HDMI
Anynet + (HDMI-CEC) : On
Network
BD Wise
: Tv TV
: On Monitor
Parental Stup
HDMI Audio
: Off
◄
HDMI Format
TV or monitor has to be connected to the player before you select this option.
BD Wise
BD Wise is Samsung's latest inter-connectivity feature.
When you connect Samsung products with BD-Wise to each
other via HDMI, the optimum resolution will be set
automatically.
• On : The original resolution of the BD/DVD disc will be
output to the TV direct.
• Off : The output resolution will be fixed according to the
Resolution previously set, regardless of the resolution of the
disc.
M
Setup
Samsung products only
Language
Music
Audio
Anynet + (HDMI-CEC) : On
Photo
Display
DVD
Setup
HDMI
Network
◄
HDMI Format
: TV
BD Wise
: PCMOn
Off
: Off
HDMI Audio
►
Parental Stup
If you want to change the resolution when you set BD Wise on, you must set BD Wise to Off in advance.
 If you set BD Wise to off, the resolution of the connected TV will be automatically adjusted to its maximum
resolution.
 If the player is connected to a device that does not support BD Wise, you can not use the BD wise function.
 For a proper operation of BD Wise, set BD Wise to ON in the menus of the player and the TV.
45
HT-BD8200_XAA_0530-2.indd 45
2009-05-30
2:29:10
HDMI setup
SETTING UP THE HDMI SETUP OPTIONS
HDMI Audio
The audio signals transmitted over the HDMI Cable can be
toggled ON/OFF.
Music
Photo
Language
Anynet + (HDMI-CEC) : On
HDMI Format
: TV
BD Wise
: On
Audio
Display
• On : Both video and audio signals are transmitted over the
HDMI connection cable, and audio is output through
your TV speakers only.
DVD
Setup
HDMI
Network
◄
HDMI Audio
: OffOn
Off
Parental Stup
• Off : Video is transmitted over the HDMI connection cable
only, and audio is output through the Blu-ray Home
Theater speakers only.
M
The default setting of this function is HDMI Audio Off.
 HDMI AUDIO is automatically down-mixed to 2ch for TV speakers.
46
HT-BD8200_XAA_0530-2.indd 46
2009-05-30
2:29:13
ENG
Parental setup
SETTING UP THE PARENTAL LOCK
The Parental Lock function works in conjunction with Blu-ray Disc/DVDs that have been assigned a rating which
helps you control the types of Blu-ray Disc/DVDs that your family watches. There are up to 8 rating levels on a disc.
1. With the unit in Stop mode, press the MENU button.
2. Press the ▲▼ buttons to select Setup, then press the
ENTER or ► button.
3. Press the ▲▼ buttons to select Parental, then press the
ENTER or ► button.
When you operate your Blu-ray Home Theater for the first
time, the “Enter New password.” message will be
displayed.
Display
Music
HDMI
Photo
DVD
Setup
Network
Parental
◄
Display
Music
HDMI
Photo
DVD
Setup
Network
Parental
Parental Setup
Enter New password.
Return
0.9 Number
4. Enter the 4-digit password using the number buttons on
the remote control.
The “Confirm the password.” message will be displayed.
Enter your password again.
Display
Music
HDMI
Photo
DVD
Setup
Network
Parental
Parental Setup
Confirm the password.
Return
0.9 Number
5. Press the ENTER or ► button to select Parental Lock.
6. Press the ▲▼ buttons to select On or Off, then press the
ENTER button.
● PARENTAL SETUP
hZ
Display
Music
HDMI
Photo
DVD
Setup
Network
Parental
◄
Parental Lock
: Off
Rating Level
: 1(Kids)
►
New Password
M
Press the RETURN or ◄ button to return to the previous menu. Press the MENU button to
exit the menu.
47
HT-BD8200_XAA_0530-2.indd 47
2009-05-30
2:29:14
Parental setup
SETTING UP THE PARENTAL LOCK
If you forgot your password
1. Remove the disc.
2. Press and hold the STOP () button on the front panel for 5 seconds or more.
• All settings will revert to the factory settings.
M
When the factory default settings are restored, all the user data stored in the BD data will
be deleted.
Setting the Rating Level
1. Press the ▲▼ buttons to select Rating Level, then press
the ENTER or ► button.
2. Press the ▲▼ buttons to select the rating level you want,
then press the ENTER button. For example, if you select
up to Level 6, discs that contain Level 7, 8 will not play.
A larger number indicates that the program is intended for
adult use only.
Level 1 is the most restrictive and Level 8 is the least.
Display
Music
HDMI
Photo
DVD
Setup
Network
Parental
◄
Parental Lock
: Off
Rating Level
: 1(Kids)
8(Adults)
1(Kids)
New Password
►
Changing the Password
1. Press the ▲▼ buttons to select New Password, then
press the ENTER or ► button.
Display
Music
Photo
DVD
2. Enter the 4-digit password using the number buttons on
the remote control. The “Enter New password.” message
will be displayed.
Setup
Music
Photo
DVD
Setup
HDMI
Parental Lock
: Off
Network
Rating Level
: 1(Kids)
Parental
◄
New Password
►
Display
Parental Lock
HDMI
Rating Level
Parental
Setup
◄
New Password
Parental
Network
: Off
: 1(Kids)
►
Enter New password.
0.9 Number
3. Enter your password again using the number buttons on
the remote control.
Return
Display
Music
HDMI
Photo
DVD
Setup
Parental Lock
Rating Level
Parental Setup
◄
New Password
Parental
Network
: Off
: 1(Kids)
►
Confirm the password.
0.9 Number
Return
48
HT-BD8200_XAA_0530-2.indd 48
2009-05-30
2:29:19
ENG
Network setup
SETTING UP THE NETWORK SETUP OPTIONS
To obtain information on the proper settings, check the network settings on your computer or contact
your Internet provider.
1. With the unit in Stop mode/No Disc mode, press the
MENU button.
Music
Photo
DVD
Setup
Display
● NETWORK SETUP
To set the network of your Blu-ray Home Theater, follow the
steps below.
HDMI
Network
◄
Parental
2. Press the ▲▼ buttons to select Setup, then press the
ENTER or ► button.
3. Press the ▲▼ buttons to select Network, then press the
ENTER or ► button.
4. Press the ▲▼ buttons to select the desired network
option from the options described below, then press the ENTER or ► button.
5. Press the ▲▼ buttons to select the desired item, then press the ENTER button.
Each network option is described in detail below.
Network Selection
Select Cable or Wireless as the method to connect to
network.
To setup, follow steps 1~3 above.
Music
Photo
DVD
Setup
Display
HDMI
Network
◄
Parental
Network Selection : Cable
►
Cable Network
Wireless Network
Proxy
NTP Server
: Off
Network Connection Test
4. Press the ▲▼ buttons to select Network Selection, then
press the ENTER or ► button.
• Cable : Select this to connect to the network using a
cable. (see page 28)
• Wireless : Select this to connect to the network
wirelessly. (see page 29)
BD-LIVE
Connection
: Allow (Valid Only)
Cable Network
To setup, follow steps 1~3 above.
4. Press the ▲▼ buttons to select Cable Network, then
press the ENTER or ► button.
Music
Photo
DVD
Setup
Display
HDMI
Network Selection : Cable
Network
◄
Parental
Cable Network
5. Press the ▲▼ buttons to select DHCP, then press the
ENTER button.
BD-LIVE
Connection
M
►
Wireless Network
Proxy
NTP Server
: Off
Network Connection Test
: Allow (Valid Only)
If DHCP is set to On, you can't select IP Address,
Subnet Mask or Gateway.
 If DNS is set to Auto, you can’t select Primary/
Music
Photo
Secondary DNS.
DVD
Setup
Display
Cable Network
HDMI
Network
DHCP
Parental
IP
Address
Network Selection : Cable
: On
Cable Network
: 000 . 000 . 000 . 000
Wireless
Network
: 255
. 255 . 255
. 000
◄
◄
Subnet Mask
►
Proxy
: 000
. 000 . 000 . 000
Gateway
DNS
NTP Server
: Auto
Primary DNS
Network
Connection
Test
: 000
. 000 . 000
. 000
Secondary DNS
: 000
. 000 . 000
. 000
BD-LIVE
Internet
: Allow (Vaild Only)
Connection
Cancel
Save
Select
: Off
Return
49
HT-BD8200_XAA_0530-2.indd 49
2009-05-30
2:29:23
Network setup
SETTING UP THE NETWORK SETUP OPTIONS
6. Press the ▲▼ buttons to select a desired item, then
press the ENTER button.
• If DHCP is set to Off and, DNS to Manual, enter
your IP Address, Subnet Mask, Gateway and
Primary DNS settings (Secondary DNS is optional).
Music
Photo
DVD
Setup
Audio
Display
Cable Network
HDMI
DHCP
Network
IP Address
Parental
Subnet Mask
◄
Network Selection : Cable
: Off
◄
Cable Network
: 000 . 000 . 000 . 000
Wireless
Network
: 255
. 255 . 255
. 000
►
Proxy
: 000
. 000 . 000 . 000
Gateway
DNS
NTP Server
: Manual
Primary DNS
Network
Connection
Test
: 000
. 000 . 000
. 000
Secondary DNS
: 000
. 000 . 000
. 000
BD-LIVE
Internet
: Allow (Vaild Only)
Connection
No
Yes
Select
: Off
Return
Setup available
• If DHCP is set to On and, DNS to Manual, enter
your Primary DNS setting (Secondary DNS is
optional).
Music
Photo
DVD
Setup
Audio
Display
Cable Network
HDMI
DHCP
Network
IP Address
Parental
Subnet Mask
◄
Network Selection : Cable
: On
◄
Cable Network
: 000 . 000 . 000 . 000
Wireless
Network
: 255
. 255 . 255
. 000
►
Proxy
: 000
. 000 . 000 . 000
Gateway
DNS
NTP Server
: Manual
Primary DNS
Network
Connection
Test
: 000
. 000 . 000
. 000
Secondary DNS
: 000
. 000 . 000
. 000
BD-LIVE
Internet
: Allow (Vaild Only)
Connection
No
Yes
Select
: Off
Return
Setup available
Setup not available
• If DHCP is set to On and, DNS to Auto, you don’t
need further or additional settings.
Music
Photo
DVD
Setup
Audio
Display
Cable Network
HDMI
DHCP
Network
IP Address
Parental
Subnet Mask
When you select an item, use the number
and ▲▼◄ ► buttons.
 If the automatic settings don’t work, contact
your ISP.
Network Selection : Cable
: On
◄
Cable Network
: 000 . 000 . 000 . 000
Wireless
Network
: 255
. 255 . 255
. 000
►
Proxy
: 000
. 000 . 000 . 000
Gateway
M
◄
NTP Server
: Auto
DNS
: Off
Primary DNS
Network
Connection
Test
: 000
. 000 . 000
. 000
Secondary DNS
: 000
. 000 . 000
. 000
BD-LIVE
Internet
: Allow (Vaild Only)
Connection
No
Yes
Select
Return
Setup not available
7. When done, use the ▲▼ buttons to select Save, then press the ENTER button.
8. If you don’t want to save your work, use the ▲▼◄ ► buttons to select Cancel, then press the
ENTER button.
M
The IP address used in this manual is for illustrative purposes only. You must refer to your
network settings for the actual IP address.
 To obtain settings for IP address, Subnet mask, Gateway and Primary DNS, check the
network settings in your computer or contact your internet service provider.
Wireless Network
To setup, follow steps 1~3 on page 49.
4. Press the ▲▼ buttons to select Wireless Network,
then press the ENTER or ► button.
Music
Photo
Audio
Network Selection : Wireless
Display
Cable Network
HDMI
DVD
Setup
Network
Parental
◄
Wireless Network
►
Proxy
NTP Server
: Off
Network Connection Test
BD-LIVE Internet : Allow (Vaild Only)
Connection
50
HT-BD8200_XAA_0530-2.indd 50
2009-05-30
2:29:28
Music
Photo
DVD
M
Setup
Audio
Network Selection : Wireless
Wireless Network
Cable Network
HDMI
Access Point
: Not Selected
◄
Network
Wireless Network
◄
DHCP
: On
Parental
Proxy
IP Address
: 000
. 000 . 000 . 000
Display
Gateway
BD-LIVE Internet : Allow (Vaild Only)
: Auto
Connection
: 000 . 000 . 000 . 000
DNS
DNS Server
 If DNS is set to Auto, you can’t select Primary/
Save
Cancel
Select
Secondary DNS.
Music
Photo
DVD
Setup
Audio
Network Selection : Wireless
Wireless Network
Cable Network
HDMI
Access Point
:◄ Not Selected
Network
Wireless Network
◄
DHCP
: On
Parental
Proxy
IP Address
: 000
. 000 . 000 . 000
Display
Gateway
BD-LIVE Internet : Allow (Vaild Only)
: Auto
Connection
: 000 . 000 . 000 . 000
DNS
DNS Server
Save
Cancel
Select
Music
DVD
Setup
Return
Audio
Network Selection : Wireless
Display
Access Point – Security
1 2 3
Cable Network
HDMI
OPEN
Network
WEP
Parental
WPAPSK
◄
◄
Wireless Network
►
Proxy
NTP Server
WPA2PSK
: Off
Network Connection Test
BD-LIVE Internet : Allow (Vaild Only)
Connection
Select
Music
- Enter in the Password then press the BLUE (D)
button to connect to your access point (Router).
Photo
Setup
Display
Photo
DVD
Setup
◄
◄
Wireless Network
►
Proxy
E F G
U V W
k l m
1 2 3
! @ #
b Space
0-9 Number
Music
Network Selection : Wireless
1 2 3
Password
Cable Network
Network
_ Parental
A B C D
Q R S T
g h i j
w x y z
+ = . ~
a Back Space
For further details on AP security, refer to the AP’s
(Router) user manual.
Return
Audio
HDMI
DVD
• If DHCP is set to Off and, DNS to Manual, enter your IP
Address, Subnet Mask, Gateway and DNS Server.
►
NTP
Server
: 255
. 255
. 255 . 000 : Off
Network
Connection
Test
: 000
. 000 . 000
. 000
Subnet Mask
Photo
- Select your appropriate Security Access Point if it is
known. If it is not, select WEP, WPAPSK or
WPA2PSK from the list below and enter in the
password. Keep trying each Security Access Point
and enter the Password until a connection is made.
Return
● NETWORK SETUP
6. Press the ▲▼ buttons to select a desired item, then press
the ENTER button.
• Select an Access Point, and then press the ENTER
button to display available list of APs.
(It may take several seconds to search.)
- When you select an AP and press the ENTER
button, it tries to connect to the designated AP.
- If successful, a notification appears.
(If selected AP shows a Lock icon, you may need to
provide security authentication.)
NTP
Server
: 255
. 255
. 255 . 000 : Off
Network
Connection
Test
: 000
. 000 . 000
. 000
Subnet Mask
If DHCP is set to On, you can't select IP Address,
Subnet Mask or Gateway.
►
ENG
5. Press the ▲▼ buttons to select DHCP, then press the
ENTER button.
I J K L M N O P
NTP Server
: Off
Y Z a b c d e f
o Network
p q r Connection
s t u v Test
5 6 7 8 9 0 − _
BD-LIVE
Internet
% ^ & ( ) / ? | : Allow (Vaild Only)
Connection
 Clear
d Save
Select
Return
Audio
Network Selection : Wireless
Wireless Network
Cable Network
HDMI
Access Point
: Not Selected
◄
Network
Wireless Network
◄
DHCP
: Off
Parental
Proxy
IP Address
: 000 . 000 . 000 . 000
NTP Server
: Off
Subnet Mask
: 255 . 255 . 255 . 000
Network
Connection
Test
Gateway
: 000
. 000 . 000
. 000
Display
DNS
DNS Server
►
BD-LIVE Internet : Allow (Vaild Only)
: Manual
Connection
: 000 . 000 . 000 . 000
Save
Cancel
Select
Return
Setup available
51
HT-BD8200_XAA_0530-2.indd 51
2009-05-30
2:29:33
Network setup
SETTING UP THE NETWORK SETUP OPTIONS
• If DHCP is set to On and, DNS to Manual, enter
your DNS Server.
Music
Photo
DVD
Setup
Audio
Display
Network Selection : Wireless
Wireless Network
Cable Network
: Not Selected
◄
Wireless Network
◄
: On
Proxy
: 000
. 000 . 000 . 000
HDMI
Access Point
Network
DHCP
Parental
IP Address
►
NTP
: 255
. 255Server
. 255 . 000 : Off
Network
Connection
Test
: 000
. 000 . 000
. 000
Subnet Mask
Gateway
BD-LIVE Internet : Allow (Vaild Only)
: Manual
Connection
: 000 . 000 . 000 . 000
DNS
DNS Server
Save
Cancel
Select
Return
Setup available
Setup not available
• If DHCP is set to On and, DNS to Auto, you don’t
need further or additional settings.
Music
Photo
DVD
M
Setup
Audio
Network Selection : Wireless
Display Wireless Network
Cable Network
HDMI
Access Point
:◄ Not Selected
Network
Wireless Network
◄
DHCP
: On
Parental
Proxy
IP Address
: 000 . 000 . 000 . 000
NTP
Server
Subnet Mask
: 255 . 255
. 255 . 000 : Off
Network
Connection
Test
: 000
. 000 . 000
. 000
BD-LIVE Internet : Allow (Vaild Only)
: Manual
Connection
: 000 . 000 . 000 . 000
Gateway
DNS
When you select an item, use the number and
▲▼◄ ► buttons.
►
DNS Server
Save
Cancel
Select
 If the automatic settings don’t work, contact
Return
your ISP.
Setup not available
7. When done, use the ▲▼ buttons to select Save, then press the ENTER button.
8. If you don’t want to save your work, use the ▲▼◄ ► buttons to select Cancel, then press the
ENTER button.
M
The IP address used in this manual is for illustrative purposes only. You must refer to the
your network settings for the actual IP address.
 To obtain settings for IP address, Subnet mask, Gateway and DNS Server, check the
network settings in your computer or contact your internet service provider.
Proxy Setting
A proxy server services requests by forwarding them to other servers.
If you are required to configure the proxy setting, enter the settings specified by the ISP.
To setup, follow steps 1~3 on page 49.
4. Press the ▲▼ buttons to select Proxy, then press
the ENTER or ► button.
• Server
• Port
• User
• Password
Music
Photo
DVD
Setup
Audio
Display
Proxy
►
User
NTP Server
Password
Network Connection Test
: Off
BD-LIVE Internet : Allow (Vaild Only)
Connection
Save
Cancel
Select
M
Network Selection : Wireless
Cable Network
: ◄Off
Wireless Network
◄
Proxy
: 8080
HDMI
Proxy
Network
Server
Parental
Port
Return
For more information, contact your ISP (Internet Service Provider).
52
HT-BD8200_XAA_0530-2.indd 52
2009-05-30
2:29:38
ENG
NTP Server (Used to Retrieve Time Information from NTP Server)
To setup, follow steps 1~3 on page 49.
4. Press the ▲▼ buttons to select NTP Server, then press
the ENTER or ► button.
• On : the player automatically connects to the Internet
server in order to adjust the time setting.
• Off : the player does not connect to the Internet server
to adjust the time setting.
Music
Photo
Audio
Cable Network
Display
Wireless Network
Proxy
HDMI
DVD
Setup
Network
◄
Parental
: OffOn
Off
Network Connection Test
NTP Server
►
BD-LIVE Internet : Allow (Vaild Only)
Connection
● NETWORK SETUP
Network Connection Test
Use this menu to check whether your network connection is working or not.
To setup, follow steps 1~3 on page 49.
4. Press the ▲▼ buttons to select Network Connection
Test, then press the ENTER or ► button.
DVD
Cable Network
Music
Audio
Photo
Wireless Network
DisplayNetwork Connection
Test
Proxy
HDMI
Setup
✔Network
MAC Address (00:10:18:00:00:70)
◄
►
NTP Server
: Off
◄
✔ IP Address.Subnet Mask.Gateway.DNS Server
Parental
Network Connection Test
✔ Gateway Ping
BD-LIVE Internet : Allow (Vaild Only)
✔ Internet Service TestConnection
Your network is operating properly
Return
BD-LIVE Internet Connection
The Blu-ray Home Theater supports BD-LIVE which enables you to enjoy a variety of interactive service
contents provided by the disc manufacturer through a network connection. To enjoy this feature, you
must first perform the LAN connection (see page 28) or Wireless Lan adapter connection to the USB slot.
* You must have a minimum 1 GB USB Memory device inserted in one of the USB slots in order to
download content from BD-LIVE.
The Internet connection may be restricted while you are using BD-LIVE contents.
To setup, follow steps 1~3 on page 49.
4. Press the ▲▼ buttons to select BD-LIVE Internet
Connection, then press the ENTER or ► button.
• Allow (All) : The Internet connection will be allowed for
all BD-LIVE contents.
• Allow (Valid Only) : The Internet connection will be
allowed only for BD-LIVE contents containing a valid
certificate.
• Prohibit : No Internet connection will be allowed for
any BD-LIVE content.
M
Music
Photo
Proxy
Audio
NTP Server
Display
DVD
Network
Parental
: Off
Network Connection Test
HDMI
Setup
◄
BD-LIVE Internet : Allow
Allow(All)
(Vaild Only)
Connection
Allow(Valid Only)
Prohibit
What is a valid certificate? When the Blu-ray Home Theater uses BD-LIVE to send the disc
data and request to the server to certify the disc, the server uses the transferred data to
check if the disc is valid and sends the certificate back to the player.
 The Internet connection may be restricted while you are using BD-LIVE contents.
53
HT-BD8200_XAA_0530-2.indd 53
2009-05-30
2:29:42
BD data management
BD Data (stored in external USB flash memory) is Blu-ray Disc content such as trailers and other
special features downloaded from the BD-LIVE service or Blu-ray Discs.
* You must have a minimum 1GB USB Memory device inserted in one of the USB slots in order to download
content from BD-LIVE.
SYSTEM DEVICE MANAGEMENT
You can manage user data stored in BD data.
1. With the unit in Stop mode, press the MENU button.
2. Press the ▲▼ buttons to select Setup, then press the
ENTER or ► button.
Time Zone
Clock Set
Power On/Off sound : On
Music
Photo
DVD
Setup
System
Language
Audio
Display
HDMI
Network
Parental
3. Press the ▲▼ buttons to select System, then press the
ENTER or ► button.
◄
BD Data Management
►
System Update
4. Press the ▲▼ buttons to select BD Data Management,
then press the ENTER or ► button.
- To delete the flash memory 1. Press the ENTER button to select BD Data Delete.
The message "All BD data will be deleted. Do you want to
continue?" will be displayed.
2. Press the ◄► button to select Yes, then press the
ENTER button.
Time Zone
Clock Set
Power On/Off sound : On
Music
Photo
DVD
Setup
System BD Data◄ Management
BD Data Management
►
Language
System
Update
Current
Device : External
Flash
Memory
TotalAudio
Size : 953MB Available Size : 889MB
Display
HDMI
Network
Parental
BD Data Delete
Select
Return
Description of Device(Storage) Information on the Player
• Total Size : Total size of the Device(Storage).
• Available Size : Available size of the Device(Storage).
M
Memory size information on the current device(storage) is located to the right of the BD
Data Management menu.
 In the external memory mode, disc playback will be stopped if you disconnect the USB
device in the middle of the playback.
 We recommend using an USB device that supports USB 2.0 protocols, FAT32 format and
4MB or more read /write speed.
 The Resume Play function may not work after formatting the storage device.
54
HT-BD8200_XAA_0530-2.indd 54
2009-05-30
2:29:45
ENG
System upgrade
Samsung may offer upgrades to your Blu-ray Home Theater's firmware in the future. To upgrade this firmware you must :
1. Go to samsung.com and refer to the ‘SUPPORT’ page to download the latest firmware.
You can use a CD-R or a USB flash drive to perform the firmware upgrade. For more information, see “Upgrade
Manual” at the website mentioned above.
or
● SYSTEM UPGRADE
2. Connect the network (see pages 28~29) and follow the steps below.
FIRMWARE UPGRADE
1. With the unit in Stop mode/No Disc mode, press the
MENU button.
2. Press the ▲▼ buttons to select Setup, then press the
ENTER or ► button.
Music
Photo
DVD
Setup
◄
System
◄
Language
Audio
3. Press the ▲▼ buttons to select System, then press the
ENTER or ► button.
Display
HDMI
Network
Parental
4. Press the ▲▼ buttons to select System Update, then
press the ENTER or ► button.
BD Data Menagement
Music
DivX(R) Registration
Photo
DVD
Setup
DivX(R) Deactivation(R)
System
System Update
◄
►
Language
Audio
Display
HDMI
5. The player will check the cable or network connection
status automatically. The connection checking window will
be displayed.
Network
Parental
BD Data Menagement
Music
Photo
DVD
Setup
DivX(R) Registration
System Update
DivX(R) Deactivation(R)
System Setup
◄
System
Update
►
Language Setup
Audio Setup
Now, Checking.
 If the upgrade is possible : You will see information on the
current and new versions of firmware in a message box.
 If the upgrade is not possible : You will see the following
description in the message box.
• If the cable is not connected :
“Ethernet cable is not connected. Please, check the
Ethernet cable”
• If the network connection has failed :
“This system can not connect to internet for update.
Please, check the network setup”
• If no latest version is released (the latest version has
been already installed) :
"The latest version of the firmware is already installed.
There is no need to update."
• If there is a disc in the player :
"Please maintain "No Disc" state for network update."
This indicates that you must remove all discs from the
unit to perform the update.
• If the server service is not available :
“ Update Server is under maintenance. Please try again
later.”
HT-BD8200_XAA_0528-3.indd 55
Display Setup
Please wait...
HDMI Setup
Network Setup
Parental Setup
BD Data Menagement
Music
Photo
DVD
Setup
DivX(R) Registration
System Update
DivX(R) Deactivation(R)
System Setup
◄
System Update
►
Language Setup
The new
Audio
Setupupdate data was found.
Current Version : XXXXX
Display Setup
New Version : XXXXX
HDMI Setup
Network Setup
StartSetup
Parental
Cancel
BD Data Menagement
Music
Photo
DVD
Setup
DivX(R) Registration
System Update
DivX(R) Deactivation(R)
System Setup
◄
System Update
►
Language Setup
This
system can not connect
Audio
Setup
to internet for update.
Display Setup
Please, check the network setup.
HDMI Setup
Network Setup
Parental Setup
OK
55
2009-05-30
2:58:43
System upgrade
FIRMWARE UPGRADE
6. To perform the system upgrade, press the ◄ ► buttons
to select Start and then press the ENTER button.
BD Data Menagement
Music
DivX(R) Registration
System Update
DivX(R) Deactivation(R)
Photo
DVD
Setup
Update
System Setup
1 2 ◄ 3 System
►
Language Setup
The new update data was found.
Audio Setup
Current Version : XXXXX
Display New
SetupVersion : XXXXX
HDMI Setup
Network Setup
Start
Parental
Cancel
7. The system update gets started.
BD Data Menagement
Music
DivX(R) Registration
System Update
DivX(R) Deactivation(R)
Photo
DVD
Setup
Update
1 2 ◄ 3 System
System Setup
►
Language Setup
update data...
AudioDownloading
Setup
Please, do not turn off the power.
Display Setup
60%
HDMI Setup
8. If you select Cancel during the download process, you are
prompted to confirm your selection in a message box.
If you want to cancel the download, select Yes and press
the ENTER button.
Network Setup
Cancel
Parental
BD Data Menagement
Music
DivX(R) Registration
System Update
DivX(R) Deactivation(R)
Photo
DVD
Setup
Update
System Setup
1 2 ◄ 3 System
►
Language Setup
9. Verification will proceed. When download is done, the
firmware update process will begin automatically.
Audio Setup
Do you want to cancel the update operation?
Display Setup
HDMI Setup
Network Setup
Yes
Parental
10.When the installation is done, the player will automatically
turn off in 5 seconds.
All settings will revert to the factory settings. The next
time you start the system and you will see the menu
language selection window.
BD Data Menagement
Music
DivX(R) Registration
System Update
DivX(R) Deactivation(R)
Photo
DVD
Setup
No
Update
System Setup
1 2 ◄ 3 System
►
Language Setup
Audio Setup
Verifying update data
Please wait.
Display Setup
HDMI Setup
Network Setup
Parental
M
If you want to cancel the upgrade in the process of
downloading the upgrade data, press the ENTER
button. You will see a confirmation message.
Selecting Yes will end the upgrade process, and
selecting No will continue the upgrade process.
BD Data Menagement
Music
DivX(R) Registration
System Update
DivX(R) Deactivation(R)
Photo
DVD
 When the system upgrade is done, check the
firmware details in the System Upgrade menu.
Setup
Update
System Setup
1 2 ◄ 3 System
►
Update.
LanguageFirmware
Setup
Now, Processing...
Audio Setup
Please, do not turn off the power.
Display
Setup
The
power
will be off automatically
HDMI after
Setupupdate is finished.
Network Setup
Parental
 Do not turn off the player during the System Upgrade,
as it may cause the player to not work properly.
 You must use a USB Flash Drive to do software upgrades using the USB Host jack.
Other USB devices(ex. MP3 player) are not guaranteed to work.
 There should be only one firmware upgrade file in USB flash drive for the player to properly
perform an upgrade.
 Oversized USB drives may not be able to be inserted when a LAN or HDMI cable is connected.
56
HT-BD8200_XAA_0528-3.indd 56
2009-05-30
2:58:58
When the firmware upgrade is done, check the firmware details by
following the steps below.
Music
Photo
DVD
Setup
◄
System
◄
1. With the unit in Stop mode/No Disc mode, press the
MENU button.
ENG
SYSTEM INFORMATION
Language
Audio
Display
2. Press the ▲▼ buttons to select Setup, then press the
ENTER or ► button.
HDMI
Network
Parental
4. Press the ▲▼ buttons to select System Information,
then press the ENTER or ► button.
You can see detailed information about the current
firmware.
Music
Photo
DVD
Setup
System
◄
System Information
Language
Time Zone
Audio
Clock Set
Display
Power On/Off sound
►
: On
HDMI
BD Data Management
Network
DivX(R) Registration
Parental
DivX(R) Deactivation(R)
● SYSTEM UPGRADE
3. Press the ▲▼ buttons to select System, then press the
ENTER or ► button.
System Update
5. Press the ENTER button to select OK.
System Setup menu will be displayed.
Music
Photo
DVD
Setup
System Information
◄
System Information
System Setup
Time Zone
Language Setup
S/W : XXXXXXX
Audio Setup
Clock Set
Loader : XXXXXXX
Display Setup
Region : B/2 (BD/DVD)
Power On/Off sound
HDMI Setup ESN : XXXX
BD Data Management
Network Setup
►
: On
DivX(R) Registration
Parental Setup
OK DivX(R) Deactivation(R)
System Update
FIRMWARE UPGRADE NOTIFICATION
This popup menu appears when a newer firmware version is available
from SAMSUNG's update server than what is currently on the Blu-ray
Home Theater.
System Update
New Firmware is available.
Do you want to update now?
• Yes : Select this to upgrade now.
• No : Select this if you plan to upgrade later.
Yes
No
DIVX(R) REGISTRATION
Music
Please use the Registration code to register this Home Theater System
with the DivX(R) Video On Demand format. For more information, visit
www.divx.com/vod
Photo
DVD
Setup
Power On/Off sound
BD Data Management
DivX(R) Registration
◄
DivX(R) Registration
System Setup
: On
►
DivX(R) Deactivation(R)
Language Setup
DemandUpdate
AudioDivX(R)
Setup Video On System
Your registration code is : XXXXXXXXXX
Display Setup
To learn more visit www.divx.com/vod
HDMI Setup
Network Setup
 This option is not activated if you select the OK. To activate this
Parental Setup
OK
option, please activate the DivX(R) Deactivation.
DIVX(R) DEACTIVATION
Music
If you want to deactivate the registration code on the website, please
select the Yes. Then, you can get a new registration code.
Photo
DVD
Setup
BD Data Management
DivX(R) Registration
DivX(R) Registration
◄
DivX(R) Deactivation(R)
System Setup
 This function can be operated when DivX(R) Registration function
is available.
►
System Update
Language Setup
AudioDivX(R)
Setup Video On Demand
Your registration code is : XXXXXXXXXX
Display Setup
To learn more visit www.divx.com/vod
HDMI Setup
Network Setup
Parental Setup
OK
57
HT-BD8200_XAA_0528-3.indd 57
2009-05-30
2:59:04
Source Exif Data: 
File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.6
Linearized                      : No
XMP Toolkit                     : 3.1-702
Modify Date                     : 2009:07:03 12:08:33+09:00
Create Date                     : 2009:07:03 12:08:29+09:00
Metadata Date                   : 2009:07:03 12:08:33+09:00
Creator Tool                    : PScript5.dll Version 5.2
Format                          : application/pdf
Title                           : HT-BD8200_XAA_0530-1.indd
Creator                         : Administrator
Document ID                     : uuid:85f1768a-7dca-4164-a7ef-7eba74e81198
Instance ID                     : uuid:82334744-ea2f-4c99-a975-8ab828ed01d6
Producer                        : Acrobat Distiller 7.0 (Windows)
Has XFA                         : No
Page Count                      : 28
Author                          : Administrator
EXIF Metadata provided by EXIF.tools
FCC ID Filing: A3LHTBD8200

Navigation menu