Samsung Electronics Co NP-Q1 Mobile PC User Manual SAMSUNG Q1

Samsung Electronics Co Ltd Mobile PC SAMSUNG Q1

Contents

Users Manual 1a

Download: Samsung Electronics Co NP-Q1 Mobile PC User Manual SAMSUNG Q1
Mirror Download [FCC.gov]Samsung Electronics Co NP-Q1 Mobile PC User Manual SAMSUNG Q1
Document ID641548
Application IDgtPg4W2svvaCVEsfmLAB/g==
Document DescriptionUsers Manual 1a
Short Term ConfidentialNo
Permanent ConfidentialNo
SupercedeNo
Document TypeUser Manual
Display FormatAdobe Acrobat PDF - pdf
Filesize318.22kB (3977762 bits)
Date Submitted2006-03-28 00:00:00
Date Available2006-03-28 00:00:00
Creation Date2006-03-21 16:34:36
Producing SoftwareAcrobat Distiller 7.0.5 (Windows)
Document Lastmod2006-03-21 16:34:55
Document TitleSAMSUNG Q1
Document CreatorFrameMaker 7.1

User’s Guide
Product Features
Small but Strong UMPC (Ultra Mobile PC)
● Intel Celeron M ULV Processor
● 256MB~Up To 1GB DDR2 Memory
● 1.8", 20~60GB High-Capacity Hard Disk Drive
7" WVGA TFT LCD
● Basic Resolution of 800x480 Pixels, Maximum Resolution of 2048x1536 Pixels
(when an external display is connected)
● Auto Scaler (Automatic Resolution Adjustment) Function to Support High Resolution Output
● Easy-to-Use Touch Screen usable with your fingers.
Microsoft Windows XP Tablet PC Edition
● Resolve PDA and Pocket PC restrictions
● Usability Similar to a Normal PC with Windows
Powerful Multimedia Functions
● Various Multimedia Programs Such as AVStation etc.
● 2 Built-in Array Microphones for Higher Audio Recording Quality SRS Surround
Sound
Multiple Network Support
● Wired LAN, Wireless LAN, Bluetooth (Optional)
● Resolves Space Restrictions through the Wireless Communication Function
Compact, Light-Weight Design for Portability / Polished Design
● A mere 779g (Without the Bluetooth modules)
● High-Gloss Front Panel
Optional Accessories for Additional Convenience
● USB Data Cable Enabling Data Exchange with another PC.
● USB External ODD, Ultra-Slim USB External Keyboard
● Power Bank to Extend Use Time
Product Features 2
Using Your Document
Congratulations on your purchase of a notebook computer with the Windows® XP operating system.
Whether you are new to using a portable computer or are an experienced user, this user’s manual
can help you get the most from your computer.
Manual Documentation Conventions
Information Icons
Three icons and their associated messages appear in this manual. The information icons are
placed before the step/information they apply to:
Warning:
Indicates the possibility of personal injury.
Caution:
Warns you of possible damage to equipment or data.
Note:
Informs you of special circumstances.
Technical Information:
Informs you of special requirements or limitations for use of item(s).
Keyboard Conventions
Keys that you need to press to perform certain functions are displayed in the manual in
brackets. For example:
 indicates the control key (Ctrl on the keyboard).
If you need to press two keys at the same time, the key names are shown joined by a plus
sign. For example:
 means that you should press the Fn key and hold it and then press the F8 key.
CD-ROM Device Naming Convention
In many installation programs you will have to get a program from the CD-ROM device. The
program installation sequence assumes that the CD is drive d:₩, however this is not always
the case. The name of the CD-ROM drive is the letter following the letter assigned to your last
HDD. For instance, if you have one HDD with two partitions, the HDD is drives C: and D: and
the CD-ROM drive is then drive E.
Using Your Document 3
Some devices and software may differ from the descriptions in the User's guide or may not
be supplied with the product depending on your computer model.
The actual appearance of the computer may differ from the pictures printed on the cover
and in the User's guide.
This manual describes procedures with both the Stylus Pen and Mouse.
'Single-Click' in this manual also means 'Single-tap' for the Stylus Pen.
Software User Documentation
Your computer is shipped from the factory with several software programs installed. The
software may include its own online or printed documentation. Refer to the documentation or
the Help options in the software for more information.
The figures and illustrations in this manual may not be identical to those on your system.
General Icon Note:
Some of the Icons used in Windows XP may be placed on the taskbar by selecting (ex:
Place the volume icon in the taskbar) in the properties dialog box.
Using Your Document 4
Contents
Product Features
Using Your Document
Manual Documentation Conventions
Contents
Chapter 1. Getting Started
Overview
Front View / Status Indicators
Top View
Right View
Left View
Rear View
Turning the Computer On and Off
To turn on the computer
To turn off the computer
10
10
11
Chapter 3. Introducing Windows
About Microsoft Windows XP
31
Get Going with Tablet PC
Tablet PC Tutorials
Reinstalling Windows XP
31
32
32
The Windows XP Screen Layout
33
Desktop
Understanding the Start Menu
Understanding a Window
33
34
35
Control Panel
36
Opening the Control Panel
User Account
Changing the Resolution and Colors
12
12
12
Chapter 4. Connecting to the Internet
Connecting Through a Wired LAN
Stylus Pen
14
Entering Text
16
16
19
Volume Control
20
Using the Buttons
21
The Menu Button
The Quick Launch Button
The Auto Scaler Button
41
Connecting Through a Wireless LAN 43
Chapter 2. Using the Computer
Using the Tablet PC Input Panel
Dialkeys
36
37
39
21
22
24
CF Card Slot
25
Connecting a Monitor
27
Connecting a Monitor
Viewing on a Monitor
Dual View
27
27
28
Wireless Network Setup
Using the Wireless LAN Setup Program
Using Samsung Network Manager
48
49
Using the Network
49
Using the network after moving location 52
Sharing Internet Access
53
Network Status Diagnosis
56
Using Bluetooth Devices
57
Bluetooth Software Setup
Using Bluetooth
57
60
Contents 5
Chapter 5. Using Applications
Introducing Programs
65
Using Samsung Update Plus
67
Program Launcher
69
Program Launcher Screen Layout
Using Program Launcher
Travelling with Your Computer
108
Handling Spills
108
Storing the Computer for Long Periods 108
69
70
Chapter 7. Troubleshooting / Appendix
71
Using Magic Doctor
Start and Screen Layout
MUSIC Station
PHOTO Station
MOVIE Station
71
72
74
78
Using Norton AntiVirus
111
Restoring the System
112
Using AVStation NOW /
AVStation Viewer
82
Using AVStation premium
Start / Exit AVStation NOW
Start / Exit AVStation Viewer
Screen Layout
MUSIC Station
MOVIE Station
82
83
84
85
87
CyberLink PowerDVD
89
Voice Recorder
91
Recording
91
Chapter 6. Customizing Your Computer
Using System Setup
Starting System Setup
System Setup Screen
Setting a Booting Password
Changing the Booting Priority
Using the Battery
Removing and Attaching Battery
Charging the Battery
Monitoring the Battery Charge
Extending the Battery Usage Time
Tips for Using Your Computer
94
94
95
97
110
Reinstalling Software
115
Reinstalling Windows XP
117
Running the System Recovery Media
Quick Installation
Standard Installation
Installing Windows
When You Cannot Run Windows
Questions and Answers
120
121
Windows Related
Display Related
Sound Related
Wired LAN Related
Wireless LAN Related
Games and Programs Related
Security Center
Other
121
121
123
124
125
129
131
133
Specifications
134
System Specification
Wireless LAN Specification (Optional)
Abbreviations
117
118
118
134
135
136
100
Glossary
138
101
Index
142
101
101
102
104
107
Contents 6
Chapter 1. Getting Started
Overview
Front View / Status Indicators
Top View
Right View
Left View
Rear View
Turning the Computer On and Off
To turn on the computer
To turn off the computer
10
10
11
12
12
12
Overview
Before You Start!
An item marked with (*) may be replaced by another item or may not be supplied with
your computer depending on the model.
The actual appearance and color of the contents may differ from the pictures used in the
material.
Front View / Status Indicators
z LCD
x Speaker(R)
x Speaker(L)
c Joystick
. Quick Launch Button
v Auto Scaler
, Enter Button
Button
m Menu Button
b Status Indicators
n Microphone
z LCD
The screen images from the computer are displayed here.
x Speaker
Used to generate sound.
c Joystick
Plays the same role as the direction keys ( ← , → , ↑ , ↓ ) on the keyboard.
Used as a joystick when playing games.
v Auto Scaler Button (Automatic Resolution Adjustment Button)
Press this button to change the screen resolution.
Auto Scaler provides 3-step resolutions. Whenever you press this button, the screen
resolution changes to 800x480 Default Resolution > 800x600 > 1024x600
sequentially. (Page 32)
b Status Indicators
Shows the operating status of the computer. The corresponding operating LED is lit
when the corresponding function operates. (Page 17)
n Microphone
Used to record sound. (Page 104)
m Menu Button
Press this button to launch the Menu Program. (Page 29)
The Menu Program provides shortcuts to frequently used functions on the computer.
You can easily change the settings.
, Enter Button
Press this button to select an item. It is the same as the Enter key on the keyboard.
. Quick Launch
You can register a frequently used program to launch it just by pressing this button.
(Page 30)
Button
Overview 8
Status Indicators
v Power Status
z HDD
x Wireless LAN c Charge Status
z HDD
This turns on while the hard disk drive is being accessed.
x Wireless LAN
This turns on when the wireless LAN is operating. (Page 53)
c Charge Status
This shows the power source and the battery charge status.
Green: When the battery is fully charged or the battery is not installed.
Amber: When the battery is being charged.
Blinks: When pressed other button in HOLD status.
Off : When the computer is running on battery power without being connected to AC
power.
v Power Status
This shows the computer operating status.
On : When the computer is operating.
Blinks: When the computer is in Standby mode.
Top View
z Wired LAN Port
c Windows Security Button
b Vents
n Stylus Pen / Stylus Slot
x CF Card Slot
v Power Switch / AVStation NOW Switch
z Wired LAN Port
A port to which an Ethernet cable is connected; connects the computer to a LAN.
(Page 50)
x CF Card Slot
A slot into which a CF card is inserted. (Page 33)
c Windows Security
Button
Pressing this button is the same as pressing the ++ keys on the
keyboard.
v Power Switch /
You can turn the computer on or off by sliding this switch to the right and releasing it.
(Page 20)
AVStation NOW
Switch
You can launch AVStation NOW by sliding this switch to the left when the computer is
turned off. (Page 87)
To turn the computer on, slide the Power switch to the right and hold it for more than
0.1 seconds before releasing it.
b Vents
The internal heat of the computer is emitted through these holes.
If the vents are blocked the computer may over-heat. This may be dangerous so avoid
blocking the vents.
n Stylus Pen /
The Stylus is used to enter information through the touch screen. (Page 22)
You can keep the Stylus Pen in the Stylus Slot.
Stylus Slot
Overview 9
Right View
z Monitor Port
A port used to connect a monitor, TV or projector supporting a 15-pin D-SUB
interface. (Page 34)
x USB Port
A port used to connect a USB device such as a USB keyboard, mouse, etc.
c DC-in Jack
A port used to connect the AC adapter supplying power to the computer.
Left View
z USB External ODD Power Port
A port used to supply power to the external USB ODD.
x USB Port
A port used to connect a USB device such as a USB keyboard, mouse, USB ODD,
etc.
c Headphone Jack
A jack used to connect the headphones.
v Volume Control Button
A button used to control the volume. (Page 28)
b HOLD Switch
If this switch is in the HOLD position (upside), none of the buttons will function.
If the computer enters HOLD mode, the Lock icon appears on the screen for a
moment and the Charge LED ([ICON]) blinks for a moment.
To release HOLD mode, slide the HOLD switch downwards.
n Hand Strap Hole
You can connect the Hand Strap here.
Overview 10
Rear View
z 20° Stand
x 80° Stand
c Battery Latch
v Battery
z 20° Stand
You can position the computer at a 20° degree angle so that you can comfortably
enter texts.
x 80° Stand
You can position the computer at an 80° degree angle so that you can comfortably
view the screen.
c Battery Latch
The latch used to remove or install the battery. (Page 112)
v Battery
A Lithium Ion rechargeable battery which supplies power to the computer. (Page 112)
Overview 11
Turning the Computer On and Off
To turn on the computer
Install the battery and connect the AC adapter. (Refer to the Getting Started Guide.)
Adjust the stand at the back of the computer at a comfortable angle.
Slide the Power Switch to the right, hold it for more than 0.1 seconds and then release
it. The computer is turned on.
When running the computer on battery power, the LCD brightness is automatically
dimmed to save battery power.
To increase the LCD brightness, press the Menu button and press Brightness Up. (Page 29)
To turn off the computer
Click the start button (
Click Turn Off.
) on the taskbar.
Click Turn Off Computer.
When the system cannot be shut down due to a system error, turn it off by sliding and
holding the Power Switch for more than 4 seconds.
After that, when turning it on by sliding the Power Switch, the disk checking program may
launch.
Turning the Computer On and Off 12
Chapter 2. Using the Computer
Stylus Pen
14
Entering Text
16
Using the Tablet PC Input Panel
Dialkeys
16
19
Volume Control
20
Using the Buttons
21
The Menu Button
The Quick Launch Button
The Auto Scaler Button
21
22
24
CF Card Slot
25
Connecting a Monitor
27
Connecting a Monitor
Viewing on a Monitor
Dual View
27
27
28
Turning the Computer On and Off 13
Stylus Pen
A Stylus Pen is used instead of mouse and provides the same function.
Before You Start!
It is recommended to connect and use a USB keyboard and mouse when using the
computer for a long time.
Taking the Stylus Pen Out
Pull the Stylus Pen upwards.
When finishing using the pen, return it to the Stylus Slot.
Stylus Pen Functions
Mouse
Stylus Pen
Function
Single-click
Single-tap
Single-tap with the pen to select an item.
Double-click
Double-tap
Double-tap with the pen to run an item.
Right-click
Press and Hold
Press and hold for more than 3 seconds with the pen to display
the Pop-up menu.
Drag
Drag
Press an item and drag it with the pen to move the item.
Learning How to Use the Stylus Pen
Select Start > Get Going with Tablet PC to learn how to use the Stylus Pen. (Page 38)
Stylus Pen 14
Calibrating the Stylus Pen
When using the Stylus Pen for the first time or the pointing position of the Stylus Pen is
incorrect, you can correct the pointing position using the TouchKit program.
Select Start > All Programs > Touchkit > Configure Utility.
In the Tools tab, press the 4 Points Calibration.
Enhancing the Accuracy
If a more precise correction is required, you can correct the pointing position by using 9Points or 25-Points Calibration.
z In the Linearization Style item in the Settings tab, select 9-Points or 25-Points
and then press the Apply button.
x In the Tools tab, press Linearization. The higher the number, the more precise a
correction is provided.
Press and hold the X-symbol displayed on the screen until it stops blinking. The Xsymbol appears repeatedly according to the selected number of points.
If the Calibration Result window appears, click the OK button. The pointing position of
the Stylus Pen is corrected.
Stylus Pen 15
Entering Text
You can enter texts by using the Tablet PC Input Panel or DialKeys on this computer.
Before You Start!
Using a USB keyboard is more convenient over long periods of use.
For example, to enter texts in Notepad, select Start > All Programs > Accessories >
Notepad and run Notepad.
Using the Tablet PC Input Panel
The Tablet PC Input Panel is an on-screen letter input pad provided by Windows. Using it,
you can enter letters with the Stylus Pen when a keyboard is not available.
You can enter letters using the Tablet PC Input Panel in 3 ways.
Click on the Tablet PC Input Panel (
) icon on the taskbar.
Writing Pad
Close
Character
Pad
Tools and
Options
On-Screen
Keyboard
Help
You can learn
detailed usage
for the Tablet PC
Input Panel.
Tablet PC Input Panel icon
Entering text using the Writing Pad
You can enter text on the Writing Pad using the Stylus Pen.
In the Tablet PC Input Panel, click the Writing Pad icon (
).
Write text in the input area of the Writing Pad with the Stylus Pen and wait a moment.
The written letters are converted into the corresponding computer characters. Press the
Insert button to enter the converted letters.
Insert
Entering Text 16
Editing Letters
Overwrite wrong letters or press the lower part of a letter to select another letter from the
displayed letters.
Entering text using the Character Pad
You can write a letter in each cell of the Character Pad with the Stylus Pen.
In the Tablet PC Input Panel, click the Character Pad icon (
).
Write a letter in the cell of the Character Pad with the Stylus Pen and wait a moment. The
written letter is converted into the corresponding computer character.
Press the Insert button to enter a converted letter.
Insert
Entering Text 17
Entering text using the On-Screen Keyboard
The On-Screen Keyboard displays a standard keyboard on the screen so that you can enter a
letter by pressing the corresponding key on the screen.
In the Tablet PC Input Panel, click the On-Screen Keyboard icon (
).
Press a letter on the screen with the Stylus Pen.
Entering Text 18
Dialkeys
DialKeys is an on-screen keyboard designed to be used with compact touch screen
computers.
You can enter letters using the DialKeys by pressing a key on the screen with your thumbs
while holding both of the lower corners of the computer with your hands.
Click on the Dialkeys icon (
) on the taskbar for more than 3 seconds and select
Show/Hide DialKeys from the pop-up menu.
Dialkeys appears on both lower corners of the screen. Enter letters using your thumbs.
Corresponds to the Enter key on a keyboard.
Corresponds to the space bar on a keyboard.
Minimizes the Dialkeys.
Corresponds to the Backspace on a keyboard.
Move the current window upwards.
To View Detailed Usage of the Dialkeys
Click on the Dialkeys icon (
) on the taskbar for more than 3 seconds and select Help
from the pop-up menu.
Entering Text 19
Volume Control
You can control the volume with the Volume Control button or Volume Control program.
Using the Volume Control with the Volume Control Button
Press the top of the Volume Control Button (
bottom of the button (-) to turn down the volume.
) (+) to turn up the volume or press the
Using the Volume Control with the Volume Control Program
Click on the Volume icon (
) on the taskbar and slide the volume slide bar up or down.
Alternatively, double-click on the Volume icon (
) and adjust the master volume control.
Volume Control 20
Using the Buttons
The procedures to use the Menu, Quick Launch and Auto Scaler buttons are described below.
The Menu Button (
Press the Menu button to launch the Menu Program. The Menu Program provides shortcuts to
frequently used functions on the computer. You can easily change the settings.
Press the Menu button again or press a point on the screen to hide the Menu Program.
Menu Items
Function
Brightness Up
Whenever this item is pressed, the LCD brightness is increased by one step.
Brightness Down
Whenever this item is pressed, the LCD brightness is decreased by one step.
Wireless LAN ON (OFF)
Press this item to turn the Wireless LAN on or off.
Wired LAN ON (OFF)
Press this item to turn the Wired LAN on or off.
Sound ON (OFF)
Press this item to turn the volume on or off.
Backlit OFF
Press this item to turn the LCD backlight off. To turn it on again, press a point on
the LCD screen once.
Using the Buttons 21
Press the item to view screen images on an external monitor.
When pressing this item once, screen images are displayed on the LCD. When
pressing this item twice, screen images are displayed on both the LCD and the
CRT (external monitor) simultaneously.
LCD/CRT
CRT Output Only is not supported.
Press this item to set up the SRS function.
SRS provides surround sound even with 2 speakers by extending the space
perception.
Whenever this item is pressed, the following function is selected.
SRS
WOW XT: For listening to music.
Trusurround: For watching movies.
SRS OFF: Turns the SRS function off.
Battery
Shows the remaining battery charge.
Whenever this item is pressed, the screen rotates by 90 degrees.
■ When rotating the screen, a part of the screen image may not be
displayed in some software programs.
■ Since the Rotation function is supported for the 800x480 pixels
resolution only, if the Rotation function does not work when pressing
the item, set the screen resolution to 800x480 pixels first by pressing
the Auto Scaler button.
Rotation
The Quick Launch Button
You can register a frequently used program to launch the program, just by pressing this
button.
The procedures to change the default settings are described below.
Default Setting
Quick Launch button is defined as follows by default.
Button
Function
Description
u1
Mouse Scroll Up
Scrolls up in the current window.
u2
Back
Moves to the previous page in Internet Explorer or Windows Explorer.
u3
Mouse Scroll Down
Moves to the next page in Internet Explorer or Windows Explorer.
Scrolls down in the current window.
u4
Forward
Scrolls down in the current window.
Using the Buttons 22
Changing the Settings
The procedures to change the default settings are described below.
Double-click the Magic Keyboard icon (
) on the taskbar.
Click the add button.
Enter a name in the Group Name field and select a shortcut key in the Select Shortcut
Key field.
Select the Run Program option, click the Browse button, select a program to be
launched and click the Open button.
Example) C:₩Program Files₩Internet Explorer₩IEXPLORE
To use the keyboard shortcut function, select the Keyboard Effect option and then
define a shortcut key combination.
Click the Apply button and click the OK button to complete the settings.
Using the Buttons 23
The Auto Scaler Button
The default resolution of this computer is 800x480 pixels. In the default resolution, the
complete screen image of programs designed for high resolutions may not be displayed
properly. In this case, press the Auto Scaler button(Automatic Resolution Adjustment
Button) on the left side of the computer and select a higher screen resolution.
When pressing the Auto Scaler button, the Auto Scaler menu appears. Whenever this
button is pressed, the screen resolution changes to 800 x 480 (Default Resolution) > 800 x
600 > 1024 x 600 sequentially.
Example)
Selecting a 800 x 480 pixels resolution
Example)
Selecting a 800 x 600 pixels resolution
The Auto Scaler button provides a function that fits high resolution screen images to the
screen size and does not support all resolutions supported by the graphics chipset. To
select a resolution, which is not supported by Auto Scaler, use the Display Properties.
(Page 46)
About the 1024X768 Pixels Resolution
The 1024x768 pixels resolution is also fitted to the screen size. You can select the
1024X768 pixels resolution by selecting the Start > Control Panel > Appearance and
Themes > Display > Setting tab. (Page 46)
Using the Buttons 24
CF Card Slot
A CF card slot is provided so that you can use CF cards. A CF card is a removable storage device
that can be used to exchange data with digital devices such as a digital camera, PDA, etc.
conveniently.
Before You Start!
This computer supports CF card types I and II.
Using the Card
Insert a card into the slot in the correct direction.
The card drive appears. If it does not appear, click Start > My Computer.
Double-click the removable disk and you can save, move and delete files on and to the
card.
You can only use a formatted card. If it is not formatted, refer to the descriptions
for'Formatting a Card'.
Removing the Card
Hold the end of the CF card and take it out.
CF Card Slot 25
Formatting the Card
You have to format a card first to use it.
If a card is formatted, all data will be deleted. Before formatting a card, please backup
your data.
Select Start > My Computer.
Press a removable disk with the Stylus Pen for more than 3 seconds and select Format
from the pop-up menu.
Click the Start button to begin formatting the card.
To use a CF card on both a computer and another digital device such as a digital camera,
it is recommended formatting the memory card in the digital device. When formatting the
memory card in the computer, you may have to format the memory card for the other
digital device again to use the memory card with that device.
CF Card Slot 26
Connecting a Monitor
Using an external display device is useful when you are giving a presentation or watching a movie
through your TV.
Connecting a Monitor
Open the Monitor OUT port cover by pulling the groove of the cover and connecting a monitor.
Viewing on a Monitor
Press the Menu button.
Press the LCD/CRT item once to display screen images on the LCD screen.
When pressing the item twice, you can view screen images on both the LCD and CRT
screens simultaneously.
LCD: Computer Screen
CRT: External Monitor Screen
Outputting to CRT only is not supported.
Connecting a Monitor 27
Dual View
Dual View is a function that enables you to view a computer screen over two display devices.
The Menu button does not support Dual View mode. You have to use the 'Display Properties'
of Windows to use Dual View.
When using Dual View, use a USB mouse.
Using a mouse to move between screens is convenient. You cannot move between screens
with the Stylus Pen.
Using Dual View to View an Extended Screen
Check if an external display device has been properly connected and configure Dual View.
Select Start > Control Panel > Appearance and Themes > Display.
If you have set the LCD as the primary display device, the primary display device (the
LCD) is indicated as '1', and the secondary display device is indicated as '2'. Now you can
view the screen through two monitors.
Click the Settings tab.
Click the monitor '2' icon, select the 'Extend my Windows desktop onto this
monitor' check box and click Apply and then the OK button.
It is recommended setting the LCD screen as the primary device ('1') when using Dual
View.
Connecting a Monitor 28
If the screen of the secondary display device is displayed at 640x480 pixels with 256
colours, select Start > Control Panel > Appearance and Themes > Display >
Settings tab > Monitor 2 and change the settings to the desired screen resolution and
colour quality.
To Move a Window between Monitors in Dual View Mode
Click and hold a window title bar on the primary display device ('1') with the mouse and drag
the window title bar to the secondary display device ('2') to move the window.
Deactivating Dual View Mode
Select the Start > Control Panel > Appearance and Themes > Display > Settings
tab.
Click the monitor '2' icon, unselect the 'Extend my Windows desktop onto this
monitor' check box and then click Apply.
Connecting a Monitor 29
Chapter 3. Introducing Windows
About Microsoft Windows XP
31
Get Going with Tablet PC
Tablet PC Tutorials
Reinstalling Windows XP
31
32
32
The Windows XP Screen Layout
33
Desktop
Understanding the Start Menu
Understanding a Window
33
34
35
Control Panel
36
Opening the Control Panel
User Account
Changing the Resolution and Colors
36
37
39
Connecting a Monitor 30
About Microsoft Windows XP
The Microsoft Windows XP Tablet PC Edition (hereafter, Windows) operating system is installed on
this computer.
Microsoft Windows XP Tablet PC Edition is an operating system to which additional features for the
tablet PC, such as a hand-writing recognition function, have been added, on the basis of Microsoft
Windows XP Professional, for the user's convenience.
You can learn elementary functions for using this tablet PC through the Get Going with Tablet PC
and Tablet PC Tutorials.
The computer has adopted touch screens so that you can operate the computer with your
hands and does not accord completely with the characteristics of a typical tablet PC.
In addition, since a Stylus Pen is provided instead of a Tablet Pen, the Tablet and Pen Settings
provided by the Windows XP Tablet PC Edition are not supported Pen Options completely.
To calibrate the Pen, use the Toutchkit program. (Page 23)
Get Going with Tablet PC
Select Start > All Programs > Get Going with Tablet PC.
The Welcome to tablet computing screen appears. Click Start to learn how to use your tablet PC.
About Microsoft Windows XP 31
Tablet PC Tutorials
You can tour elementary functions of your tablet PC and learn how to hand-write on the
Writing Pad through the Tablet PC Tour.
Tablet PC Tutorials only supports the 1024x768 pixels resolution.
Before running the Tutorials, select the Start > Control Panel > Appearance and
Themes > Display > Settings tab and change the screen resolution to 1024x768
pixels.
Select Start > All Programs > Tablet PC > Tablet PC Tutorials.
The Tablet PC Tour screen appears. Click Next to learn how to perform 'Note Writing',
'Entering texts with the Tablet PC Input Panel', etc.
Reinstalling Windows XP
If you cannot start up Windows due to damage to the system or errors frequently occur, you
can reinstall Windows using the System Recovery Media (DVD). (Page 125)
You can use the system recovery media by connecting the USB External ODD to the system.
About Microsoft Windows XP 32
The Windows XP Screen Layout
The screen layout of Windows XP Tablet PC Edition is the same as that of Windows XP.
Desktop
The desktop is the working area on the computer. It consists of a large workspace and
a taskbar at the bottom as shown in the figure below.
v Language Bar
z Start
x Tablet PC Input Panel
c Taskbar
b System Tray with Clock
z Start
Opens the Start menu.
x Tablet PC Input Panel
The Input Pad used to enter letters.
c Taskbar
Running programs are displayed here.
v Language Bar
Switches the text input language.
b System Tray with
Displays some program icons that are currently running.
Infrequently used icons are hidden. When clicking the left arrow icon, hidden
icons are displayed.
Clock
The Windows XP Screen Layout 33
Understanding the Start Menu
The Start menu includes everything that is required to start Windows. From the Start menu it
is possible to run a program, open a file, assign system users with Control Panel, receive
support by clicking Help and Support, and search desired items from the computer or Internet
by clicking Search.
My Computer
Control Panel
Frequently used
programs
Help and Support
All Programs
Start Button
My Computer
Displays the contents of the hard disk, the CD-ROM drive, the network
drive(s), and floppy disks. It can also be used to search and open files
and folders.
Control Panel
Enables users to configure settings on the computer.
Help and
Support
Provides on-line help, information on Windows and troubleshooting.
Search
Enables users to search for information in files or the Internet.
Run
Run programs or documents.
The Windows XP Screen Layout 34
Understanding a Window
A window is the basic component in working with the computer. The My Computer window,
which is a window for the computer's hard drive, will be used as an example here to show the
basic composition of a window.
Click Start > My Computer.
Menu Bar
Title Bar
Minimize Button
Maximize Button
Close Button
Tool Bar
Folder Icon
Quick Task
Window
Drive Icon
(Storage Device)
Double-click the hard drive (local disk) to view internal folders and files stored in it. If the
contents do not appear, click Show the contents of this folder.
What is a drive?
A storage device in which files and folders are saved in, and read from.
What is a folder?
A folder is used to group and manage files systematically, and may include files in subfolders. It is similar to a bookshelf.
What is a file?
A file is a document or various kinds of material that is generated as a result of program
operation. It is also called data.
To view the entire structure of the drive
Click the Folder icon in the taskbar to view the entire structure. Click again to return to the
Quick Task Window.
The Windows XP Screen Layout 35
Control Panel
In the Control Panel, tools to configure Windows are collected.
Opening the Control Panel
Select Start > Control Panel.
Icon
Name
Function
Appearance and
Themes
Used to change the appearance of Windows.
Using this function, you can change the Desktop, apply a theme and a screen
saver to the computer, and change the Start menu and Taskbar.
Network and Internet
Connections
Using this function, you can configure the network settings or configure
and add Internet connections.
Add or Remove
Programs
Using this function, you can add or remove a program from Windows.
Sound, Speech and
Audio Devices
Using this function, you can adjust the volume, select a sound scheme, and
set up speakers.
Performance and
Maintenance
Using this function, you can set Windows performance options.
In addition, you can manage the hard disk drive and hardware.
Printers and Other
Hardware
Using this function, you can add or configure a printer, mouse, keyboard,
scanner, camera, or gaming device, etc.
User Accounts
Using this function, you can add or set a Windows XP user account.
Date, Time, Language
and Regional Options
Using this function, you can configure the date, time, language, regional
settings.
Accessibility Options
Using this function, you can select options for weak-eyed and disabled
persons.
Security Center
Using this function, you can check the current security status to protect the
user's computer and configure the security settings for the firewall, virus
anti-virus program, etc.
Control Panel 36
User Account
Windows XP allows each user to use a computer with his user account. The procedures to add
a user account and switch between user accounts are described below.
Adding a User Account
Select Start > Control Panel.
Click the Tablet PC Input Panel icon, enter a name and then click the Next button.
Double-click User Accounts and click Create a New account.
Select an account type, click Create Account, and then check the newly created account
in the user account screen.
If you cannot see the bottom of the screen, press and drag the scroll bar of the window
with the Stylus Pen.
To change the user account information, click an account to be changed.
You can change the account name, password, type and picture.
Control Panel 37
Deleting a User Account
Select Start > Control Panel > User Accounts.
Click a user account to be deleted and click Delete Account.
You cannot delete the current login user account.
Switching Users
Select Start > Log Off.
Click a user account to login to the Start screen.
Click Switch User.
Login with a new user account.
Control Panel 38
Changing the Resolution and Colors
The resolution means the number of pixels displayed on the screen. When setting the
resolution higher, items on the Desktop become smaller and more items can be displayed on
the screen. The higher the color quality, the more colors are displayed on the screen.
Select Start > Control Panel > Appearance and Themes > Display.
Click Settings and change the Screen Resolution and Color Quality and then click
OK.
You can check your graphics chipset.
To set the color quality, select a color
quality in the Color quality field.
To set the resolution, slide the resolution slide bar to a
desired resolution in the Screen resolution field.
• If 1024x768 or a higher resolution is selected, the entire screen is not displayed on the
LCD screen. In this case, you have to move the mouse pointer up, down, left or right to
view the hidden part of the screen image.
• If the 800x480 resolution is not available
When selecting the 800x600 or 1024x600 resolution by pressing the Auto Scaler button,
the 800x480 resolution may not appear in the Display Properties window. In this case,
press the Auto Scaler button and select the 800x480 resolution.
Control Panel 39
Chapter 4. Connecting to the Internet
Connecting Through a Wired LAN
41
Connecting Through a Wireless LAN
43
Wireless Network Setup
Using the Wireless LAN Setup Program
48
Using Samsung Network Manager
49
Using the Network
Using the network after moving location
Sharing Internet Access
Network Status Diagnosis
49
52
53
56
Using Bluetooth Devices
57
Bluetooth Software Setup
Using Bluetooth
57
60
Control Panel 40
Connecting Through a Wired LAN
Before You Start!
You can also configure the network settings using the Samsung Network Manager. (Page
56)
Before configuring the Wired LAN, you have to turn the Wired LAN on, if it is turned off.
Press the Menu button and press the Wired LAN ON item to turn it on.
Connect a LAN cable to the computer’s LAN port.
Click Start > Control Panel.
On the General tab, select “Internet Protocol(TCP/IP)” and click Properties.
Click Network and Internet Connections in the [Control Panel] window.
Click Network Connections in the [Network and Internet Connections] window.
Right-click(press and hold the Stylus Pen for more than 3 seconds) the Local Area
Connection icon and click Properties.
Connecting Through a Wired LAN 41
z
To use DHCP:
On the General tab, select “Obtain an IP address automatically” and “Obtain DNS server
address automatically”. Click OK.
To use a static IP:
On the General tab, select “Use the following IP address” and fill in the IP address,
Subnet mask, Default gateway, Preferred DNS server, and Alternative DNS server fields.
Click OK.
To use both DHCP and static IP simultaneously:
On the Alternate Configuration tab, click User configured and fill in the fields.
Click OK.
Connecting Through a Wired LAN 42
Connecting Through a Wireless LAN (Optional)
A wireless network (Wireless LAN) environment is a network environment that enables
communication between multiple computers at home or a small-size office through wireless LAN
devices.
Using the wireless network connections between the systems, you can use normal network
functions such as sharing of files, folders and printers. When a computer-to computer network
has been established, a computer that is not connected to the Internet can share the Internet
by accessing another computer connected to the Internet. For details, see “Sharing Internet
Access” on page 53.
A wireless LAN card is optional. The model of the wireless LAN card is determined by the
relevant product.
To view the installed wireless LAN card, click Start > Control Panel > Performance and
Maintenance > System > Hardware tab > Device Manager.
The wireless LAN connection settings will be described on the basis of the Windows XP
Service Pack 2 installed computer.
It is recommended using the default settings provided by Windows XP for the wireless LAN
settings for Windows XP installed computers.
To setup using the software supplied by the wireless LAN card manufacturer, refer to
"Wireless Network Setup Using the Wireless LAN Setup Program" (p46).
To use the Wireless LAN, you have to turn the Wireless LAN on first, if it is turned off.
Press the Menu button and press the Wireless LAN ON item to turn it on. If the Wireless
LAN is turned on, the Wireless LAN LED ( ) is lit.
Wireless network connections can be classified into two categories.
1) Access Point (AP)
You can connect to an AP to use the network. This is possible only in an environment equipped
with an AP. For details, see “Connecting to an Access Point (AP)” on page 44.
What is an Access Point (AP)?
An AP is a network device that bridges wired and wireless LANs, and corresponds to a
wireless hub in a wired network. You can connect multiple wireless LAN installed
computers to an AP.
2) Computer-to-computer (ad hoc)
This is also called a peer-to-peer network.
In computer-to-computer wireless networks, you can wirelessly connect 2 or more computers
that have wireless LAN modules. For details, see “Connecting to computer-to-computer
networks (peer-to-peer or ad hoc)” on page 45.
Connecting Through a Wireless LAN (Optional) 43
Connecting to an Access Point (AP)
This section describes how to connect to an AP. You can use the network when you are
connected to an AP.
For more detailed information such as the network key (encryption key), ask your network
administrator.
Right-click(press and hold the Stylus Pen for more than 3 seconds) on the Wireless
Network Connections (
) icon on the taskbar, and select View Available Wireless
Networks.
Select an AP (E.g. Test) to connect to and click Connect.
If there is a configured network key for the AP to connect to, the Enter Network Key
window appears. Enter the Network Key in the window and then click the Connect
button.
When a network key is not defined for a selected AP, click on Link to display the warning
message box. Then click Connect again in the box.
Now when Connected in AP is displayed, and you can access the network.
Checking the connection status
Move the mouse pointer over the Wireless Network Connection (
and the connection status is displayed.
) icon on the taskbar,
Connecting Through a Wireless LAN (Optional) 44
Connecting to computer-to-computer networks (peer-to-peer or ad hoc)
In computer-to-computer wireless networks, you can wirelessly connect 2 or more computers
that have wireless LAN modules. Using this method, a computer that is not connected to the
Internet can share the Internet by accessing another computer connected to the Internet.
(Refer to "Sharing Internet Access" on page 53.)
You can connect by completing the following steps:
• Step 1. Set up a computer-to-computer network on a computer.
• Step 2. Connect to the configured computer from other computers.
Step 1. Setting up a computer-to-computer network
Right-click on the Wireless Network Connection (
View Available Wireless Networks.
Click Change the order of Preferred Networks.
On the Wireless Network tab, click Advanced.
In the Wireless Networks tab, click Add.
) icon on the taskbar, and select
Clear 'Automatically connect to non-default network' check box, if it is selected. Select
'Computer-to-computer (ad hoc) networks only', and click Close.
Enter the network name (e.g. samsung), and unselect 'The key is provided for me
automatically'. Enter the encryption key in the Network key field, and click OK.
Connecting Through a Wireless LAN (Optional) 45
To prevent a network connection from an unauthorized user, it would be better to
configure a network key (encryption key). A network key consists of 5 ~ 13 alphanumeric
characters (e.g. magic), or of 10 ~ 26 hexadecimal numbers (a hexadecimal number is
represented by numbers '0' to '9' or letters 'a' to 'f').
Check that the configured network name (e.g. samsung) is in the ’Preferred networks’
item, and click OK.
Now your wireless network setup has been completed.
Connecting Through a Wireless LAN (Optional) 46
Step 2. Connecting to the configured computer
Right-click on the Wireless Network Connection (
View Available Wireless Networks.
Select the wireless network name (e.g. samsung) specified in ”Connecting to computerto-computer networks (peer-to-peer or ad hoc)” on page 45, and click Connect.
Enter a cryptographic key in the network key box and click Connect.
) icon on the taskbar, and select
If the network key is not configured in ”Connecting to computer-to-computer networks
(peer-to-peer or ad hoc)” on page 45, just click Connect, without any keystrokes.
When connected to the wireless network, the system displays Connected in the selected
network of the Network Connection window.
Checking the connection status
Move the mouse pointer over the Wireless Network Connection (
and the connection status is displayed.
) icon on the taskbar,
Connecting Through a Wireless LAN (Optional) 47
Wireless Network Setup Using the Wireless LAN Setup Program
The procedures to connect to an access point using a wireless LAN configuration program are
described below. Since the wireless LAN configuration program is included on the System
Software Media, the user has to install the program.
Before You Start!
To use the system software media, the external USB ODD must be connected to the
computer. The following descriptions presuppose that the external ODD is connected.
Insert the System Software Media into the CD drive and install the wireless LAN
configuration program (ACU: Atheros Client Utility).
Select System Software Media > User Installation > Wireless LAN Driver
ReadMe, click ReadMe and install the program according to the instructions.
Right-click( press and hold the Stylus Pen for more than 3 seconds) on the wireless LAN
configuration program (
) on the taskbar and select Open Atheros Client Utility.
Alternatively, click Start > All Programs > Atheros Client Utility > Atheros Client
Utility.
In the Profile Management tab, click Scan to search for available wireless networks.
Enter a profile name to be used for the connection and select the security settings of the
AP to be connected to in the Security tab.
Select the name of an access point (AP) to connect to from the network name (SSID) and
then click Activate.
The network authentication, encryption type and password of an access point are
configured through the access point management program. For the security information,
check the security settings of an access point or ask your wireless network administrator.
Refer to the following when setting a WEP key.
• Data encryption (WEP): The IEEE 802.11 WEP (Wired Equivalent Privacy) standard
defines two levels of encryption, a 64-bit key (this is sometimes represented by 40bits)
and a 128-bit key.
When connecting to an Atheros access point, you can use the 152-bit key (32
hexadecimal digits or 16 ASCII characters).
• Key index: Select the current encryption key index used by the access point from
between 1 to 4.
• Using an encryption key: Enter 5 (for 64-bit) or 13 (for 128-bit) alphanumeric
characters (represented by 0-9, a-z, or A-Z).
Click OK and then OK again in the Profile Management window.
If the profile is created, the profile appears in the list in the Profile Management tab and
the connection is established using the profile.
Connecting Through a Wireless LAN (Optional) 48
Using Samsung Network Manager
Samsung Network Manager is a program that has been developed to enable users to use the
network easily.
Samsung Network Manager provides the following features.
• You can easily set up the network and printer settings.
• You can immediately use the network without defining new network settings
again after moving locations.
By setting the network settings (IP address, printer settings, etc.) for each location, you
can immediately access the network without following network setting procedures each
time regardless of your location.
• You can easily share Internet Access.
You can share your Internet connection by setting up a computer with 2 LAN interfaces
(wired and wireless, or 2 wired LAN) as the sharing server. Then, you can access the
Internet on a sharing client by connecting to the sharing server.
• You can diagnose the network status.
You can diagnose the network status when the network is not properly connected.
Using the Network
This section describes the procedures to connect to the Internet by setting up a network. The
setting up procedures include the procedures to add a printer to the network.
To use a wired LAN, connect the LAN cable to the LAN port and turn the wired LAN on, if
it is turned off.
Press the Menu button and click the Wired LAN ON item to turn it on.
To use a wireless LAN, you have to turn it on, if it is turned off.
Press the Menu button and click the Wireless LAN ON item to turn it on. When the
wireless LAN is turned on, the Wireless LAN LED ( ) lights up.
Run Samsung Network Manager.
Select Start > All Programs > Samsung > Samsung Network Manager >
Samsung Network Manager or double click the Samsung Network Manager(
icon on the Desktop.
Click the Add button.
Select a network location icon and enter the name of the location (e.g. Home). Click the
Next button.
Using Samsung Network Manager 49
5
Select Internet direct connection and click the Next button.
Select the LAN device, setup the IP address and click the Next button.
Select Device
Setup IP Address
Select Device
Select a device to be connected to the Internet. Select either Wired LAN or Wireless LAN.
Setting up the IP Address
To allocate an IP address automatically (DHCP), select Get IP Automatically.
To use a static IP address, unselect Get IP Automatically and enter an IP address. For
IP address information, ask your network administrator.
When the Printer Setting window appears, click Finish.
To add a printer, click Add Printer. The Add Printer Wizard appears. Set up the printer
according to the instructions displayed on the screen.
When the printer has been added, click the Show printer button, select the newly added
printer and then click the Finish button.
Using Samsung Network Manager 50
To not add a printer, select No Default Printer and then click the Finish button.
When the network setting is complete, the ’Do you want to move to newly added
location now?’ message appears. If you select ’Yes’, the network settings for the added
location are applied.
When the network settings for the added location are applied, the added place and the
corresponding network connection information is displayed in The detailed Information
for window.
When the network setting is complete, an icon for the added location is created within the
Saved Locations window. Now you can use the Internet or add a new network location.
Menu
Current Place
Information
Saved Locations
Wireless LAN AP Connection Procedures
To use a wireless LAN, first connect to a wireless LAN AP and then you can access the
network even when moving location. Or moving location and then you can access the
network even when connecting to a wireless LAN AP
z Right-click over the Wireless Network Connection (
click View Available Wireless Networks.
) icon on the Taskbar and
x Click Search AP from the Wireless menu to search for wireless LAN APs.
Select an available wireless network (e.g. SAMSUNG) and click the Connect button. For
information on available wireless LAN APs, ask your network administrator.
Using Samsung Network Manager 51
Available AP
Connect
c The network key (security key) input window appears.
- If a network key has been set for the wireless LAN AP, enter the network key and click
the Connect button. For the network key information, ask your network administrator.
- If no network key has been set for the wireless LAN AP, click the Connect button
without entering the network key.
v When the computer is connected to the wireless LAN AP, the Connected message will
appear on the Wireless Network icon in the Taskbar.
Using the network after moving location
By setting the network settings (IP address, printer setting, etc.) for each location, you can
immediately access the network without performing the network setting procedures
regardless of your location.
Run Samsung Network Manager when connected to the Internet.
When the network settings of the selected location are applied, the new location and the
network connection information are displayed in The detailed Information for
window.
Select an icon that represents the corresponding location from the Saved Locations
window and then click Move.
Using Samsung Network Manager 52
Sharing Internet Access
This section describes the procedures to share Internet Access.
To share Internet Access, you first have to set a sharing server and a sharing client. When the
setup is complete, you can access the Internet from the sharing client by connecting to the
sharing server.
Sharing Server : A computer with a direct connection to the internet and a local network
connection.
Sharing Client : A computer that uses the Internet by connecting to a sharing server
without itself having a direct connection to the Internet.
You can connect a sharing server and a sharing client as follows.(See Figure 5 on page
(p50))
Sharing Server
Sharing Client
External Internet Device
Client Device
Connection 1
Wired LAN
Wireless LAN
Wireless LAN
Connection 2
Wireless LAN
Wired LAN
Wired LAN
Connection 3
Wired LAN
Wired LAN
Wired LAN
For Connection 1: To use a wired LAN, connect the LAN cable to the LAN port and turn
the wired LAN on, if it is turned off.
Press the Menu button and click the Wired LAN ON item to turn it on.
To use a wireless LAN, you have to turn it on, if it is turned off.
Press the Menu button and click the Wireless LAN ON item to turn it on. When the
wireless LAN is turned on, the Wireless LAN LED ( ) lights up.
For Connection 2,3: To connect a sharing server and a sharing client using a wired LAN,
connect the computers with a crossover LAN cable or network hub first.
For Connection 3, you have to connect a LAN card in advance.
As an example, Internet sharing procedures for [Connection 1], which connect the sharing
server and the Internet through a wired LAN and connect the sharing server and the sharing
client through a wireless LAN, are described below.
Setting Up a Sharing Server
Run Samsung Network Manager on the computer to be used as the sharing server.
Select Internet direct Connection for sharing and click the Next button.
Click the Add button.
Select a network location icon and enter the name of the location (e.g. Home). Click the
Next button.
Set up the network device to be connected to the external Internet. Determine whether
to use a firewall and select a network device to be connected to the external Internet (e.g.
Wired LAN). Set the IP address and then click the Next button.
Using Samsung Network Manager 53
Determine whether
to use a firewall
Select a device
Set an IP address
- To protect against external intrusion attempts, using a firewall is recommended.
- For more information on selecting a device and setting the IP address, refer to the
description of item 6 of "Setting Up a Network" on page 47.
Select a network device to connect to the sharing client (e.g. wireless LAN) and click the
Next button.
To Share Internet Access through a Wireless LAN
- In the Select Device field, select Wireless.
- In the Wireless Connection Name (e.g. Samsung) field, enter the network name.
- To use the network key (security key), select the "Use Password ,,," option and enter
a network key. Remember the network key because you have to re-enter the key on the
sharing client to connect to the sharing server.
The setup information is displayed. Confirm the settings and click the Next button.
When the Printer Setting window appears, click Finish.
For the printer setup procedures, refer to the description of item 7 of "Setting Up a
Network" on page 47
When the Shared Server setting is completed, set up the shared client.
Using Samsung Network Manager 54
Setting Up the Sharing Client
Run Samsung Network Manager on the computer to be used as a sharing client.
Click the Add button.
Select a network location icon and enter the name of the location. Click the Next button.
Select Internet Sharing and click the Next button.
- To connect through a wireless LAN, select Internet Sharing - Wireless.
- To connect through a wired LAN, select Internet Sharing - Wired.
Confirm the network device to be connected to the server and click the Next button.
- To connect through a wireless LAN, enter the wireless connection name (e.g.
Samsung) you entered in the sharing server. If you have set a network key (security key)
for the sharing server, enter the network key.
The setup information appears. Confirm the information and click the Next button.
When the Printer Setting window appears, click Finish.
For the printer setup procedures, refer to the description of item 7 of "Setting Up a
Network" on page 47
When the settings are completed, you can use the Internet on the shared client.
- To access the Internet from the sharing client, the sharing server has to be on.
- To use the Internet on the sharing client, select a sharing client icon from the Location
List window and then click the Move button.
- If the connection is broken while using the Internet on the sharing client, click the Ap
Active from the Wireless menu to reestablish the connection.
Using Samsung Network Manager 55
Network Status Diagnosis
You can diagnose the network status when the network is not properly connected.
Run Samsung Network Manager.
When the diagnosis is complete, out of order devices are marked by the exclamation mark
icon. For detailed device status, read the description in the lower part of the window.
Select Auto Diagnosis from the Manage menu.
The Network Connections figure window appears. Click the Start button to start the
network diagnosis.
Reconnect and set up the device according to the diagnosis result.
Using Samsung Network Manager 56
Using Bluetooth Devices (Optional)
Bluetooth is a wireless communication technology that allows access to devices nearby such as a
computer, mobile phone, printer, keyboard or mouse without a cable connection. Bluetooth enables
file transmissions, Internet access, a private area network function, and access to a keyboard,
mouse and printer between devices supporting the Bluetooth function without a cable connection.
Before You Start!
• The Bluetooth function is only available between devices supporting Bluetooth
(computers, mobile phones, PDAs, printers, etc.), and the function may be restricted
depending on the device profile.
• The Bluetooth function is optional and may not be supported depending on your
model.
Bluetooth Functions
•
•
•
•
•
•
•
File Transmission (
You can exchange files between 2 Bluetooth devices. You can exchange files with other
computers, mobile phones, PDAs, etc.
Network Access (
You can connect to another computer with the Bluetooth function as you access a wireless
LAN in Ad-Hoc mode or connect to the Internet through an AP or Internet Connecting
Sharing Server.
Network Access through a Phone Connection (
You can connect to the Internet through a Bluetooth mobile phone.
Data Sync (Synchronization) (
You can synchronize the PIMS data (Outlook E-mail address data) with mobile phones,
PDAs, notebook computers, etc. supporting Bluetooth.
Electronic Business Card (Vcard) Exchange (
You can exchange electronic business cards with mobile phones, PDAs, notebook
computers, etc. supporting Bluetooth.
Sound Output (
You can listen to audio from the computer through another Bluetooth device or listen to
audio of another Bluetooth device through the computer.
HID Connections (
You can connect a keyboard, mouse, joystick, etc. supporting Bluetooth.
For more information about using the Bluetooth function, refer to the online help of the
Bluetooth Device.
Bluetooth Software Setup
Bluetooth software is installed on computers supporting Bluetooth.
For first time use, set up the Bluetooth software as follows.
Using Bluetooth Devices (Optional) 57
1
Right-click(press and hold the Stylus Pen for more than 3 seconds) on the Bluetooth
icon ( ) at the bottom right of the taskbar, and select Start Using Bluetooth from
the pop-up menu.
Click the Next button to start setting up.
In the setting up steps, enter a device name to be displayed in the Bluetooth Manager
program. Enter a Name in the Computer Name field and select Laptop for the Computer
Type field.
Also, a step appears for selecting the services to be provided by your Bluetooth device for
other Bluetooth devices. At this point, the program automatically detects available services
and displays them as selected. It is recommended not to change the default selection.
If you change the service settings, the driver necessary for the additionally selected
services are installed.
At this point, a warning message may appear informing you that there is no Microsoft logo.
Since it does not affect the operation, continue the installation.
If the driver installation is complete, the next step proceeds which searches for nearby
Bluetooth devices. Since you do not have to search while setting up, click the Skip button
and finish the settings.
Using Bluetooth Devices (Optional) 58
4
When the settings are complete, the Bluetooth icon menu of the notification area
changes as shown in the figure.
Using Bluetooth Devices (Optional) 59
Using Bluetooth
Describes how to exchange files between computers supporting Bluetooth and how to use
other Bluetooth devices.
Bluetooth Help
Bluetooth Help provides detailed procedures on using Bluetooth functions.
Double-click on My Bluetooth Settings on the Desktop and click Help > Bluetooth Help
from the top menu.
Select Start > Help and Support > Networking and the Web > Networking > Wireless
networking > Bluetooth devices (wireless) to view Windows Help.
Exchanging Files between Bluetooth computers
The procedures to exchange files and folders between Bluetooth computers are described
below.
On the computer which is sending a file (hereafter Computer A), right-click(press and hold
the Stylus Pen for more than 3 seconds) the Bluetooth icon ( ) on the taskbar and
select Quick Connection > File Transmission > Search for Device.
In the Select Device window, click on a computer to be connected (hereafter Computer B).
Using Bluetooth Devices (Optional) 60
3
If the Bluetooth PIN code requested notification window appears on the bottom right
taskbar, click on the window, enter the Bluetooth PIN code and click the OK button.
The Bluetooth PIN Code is a password used for the connection between two Bluetooth
devices, the user just enter the same PIN Code (E.g. same numbers) on both Bluetooth
devices to make a connection.
After a short while, the Bluetooth PIN Code required dialog box appears on Computer
B, enter the code that you have entered in Step 3 above.
If the FTP File Access Privilege Request window appears on Computer B, click on the
window. If the Select Access Permission window appears, click the OK button.
The file transmission window appears on computer A. Drag files or folders to send onto
the window, and the files or folders are automatically transmitted.
Using Bluetooth Devices (Optional) 61
7
If the file transmission is complete, close the File Transmission window.
The received files are saved in the C:\Documents and Settings\[user name]\My
Documents\Bluetooth Exchange folder.
Connecting Keyboard, Mouse, Joystick and Headset devices
The procedures to use Bluetooth HID devices (keyboard, mouse, joystick, etc.) or a headset,
etc. on the computer are described below.
The Bluetooth PIN Code is a password used for the connection between two Bluetooth
devices, the user just enter the same PIN Code on both Bluetooth devices to make a
connection.
Turn on the Bluetooth function on the device to connect to (mouse, keyboard, joystick or
headset).
Some devices have a button to turn on the Bluetooth function, so refer to the
corresponding device manual.
Double-click on the My Bluetooth Settings icon (
If the My Bluetooth Settings window appears, click on View Devices within
Coverage.
) on the Desktop.
If the device to connect to appears, click on the device. (E.g. mouse)
If the device does not appear, click the View Devices within Coverage. If the device
has not appeared yet, since this menu changes to Search Devices within Coverage,
click the Search Devices within Coverage to show the device.
Using Bluetooth Devices (Optional) 62
4
If the Bluetooth PIN Code input window appears, enter a PIN code referring to the
manual of the corresponding device. The PIN code for an HID device is generally printed
in the manual of the corresponding device.
If you enter the PIN code, you can immediately use the device.
A Bluetooth keyboard and mouse work only in Windows. They will not work in MS-DOS
mode or in Hibernation mode.
Stopping a Bluetooth device
Right-click(press and hold the Stylus Pen for more than 3 seconds) the Bluetooth icon (
on the taskbar and select Stop the Bluetooth Device.
To use a Bluetooth device after stopping it, select Start Bluetooth device as above.
Use Instructions
•
•
•
•
•
•
Bluetooth devices must be within a 3m distance.
For a better communications environment, use the devices in an open space where no
wall or obstacle exists.
For a telephone connection, data synchronization, electronics business card exchange,
fax transmission/reception, sound related functions, and serial port function, you can
connect with only one Bluetooth device.
Using the network connection or file transmission function, multiple Bluetooth devices
can be connected. However, since connecting with multiple devices may slow down the
data rate or make the connection unstable, connecting with one device at a time is
recommended.
The Bluetooth function of a Bluetooth PDA, mobile phone, mouse or keyboard may be
turned off. To use them in connection with a Samsung computer supporting Bluetooth,
you must check if the Bluetooth function of the device to connect to is turned on.
For the procedures on turning on the Bluetooth function of a device, refer to the manual
of the device.
The services provided by Bluetooth devices may vary depending on their capability. For
the services provided by Bluetooth devices, refer to the manual of the device.
Using Bluetooth Devices (Optional) 63
Chapter 5. Using Applications
Introducing Programs
65
Using Samsung Update Plus
67
Program Launcher
69
Program Launcher Screen Layout
Using Program Launcher
Using AVStation premium
Start and Screen Layout
MUSIC Station
PHOTO Station
MOVIE Station
69
70
71
71
72
74
78
Using AVStation NOW / AVStation Viewer 82
Start / Exit AVStation NOW
Start / Exit AVStation Viewer
Screen Layout
MUSIC Station
MOVIE Station
82
83
84
85
87
CyberLink PowerDVD
89
Voice Recorder
91
Recording
91
Using Bluetooth Devices (Optional) 64
Introducing Programs
Using software supplied with the Samsung computer, you can easily use difficult functions and
troubleshoot problems by yourself. Learn how to use the programs yourself. For detailed
information, refer to the help of the corresponding software.
Before You Start!
Every software program may not be provided or the version may differ depending on your
computer model.
Multi Media Functions
•
Program Launcher
The Program Launcher categorizes frequently used programs, folders, web sites so that
you can easily manage and access them. This program is designed for the small LCD size
so that you can easily use this program with the Stylus Pen or your fingers. (Page 75)
•
AVStation premium (
AVStation premium is an integrated multimedia program that enables users to enjoy better
quality of music, photographs, video, movies, etc. all with a single program. (Page 77)
•
AVStation Viewer
AVStation Viewer is a program that enables you to easily run AVStation premium in full
screen. (Page 87)
•
AVStation NOW
AVStation NOW is an integrated multimedia program that enables users to enjoy
photographs, video, DVDs, music, etc. all with a single program and without booting
Windows even when the computer is turned off. (Page 87)
Introducing Programs 65
•
CyberLink PowerDVD (
CyberLink PowerDVD is a DVD player program supplied with the external USB ODD. To use
this program, you have to install this program manually. (Page 95)
•
Voice Recorder (
Video Recorder is a program which enables users to make and play recordings. (Page 104)
Management Functions
•
Samsung Update Plus (
Samsung Update Plus is software that examines and updates the Samsung software and
drivers installed on your Samsung computer to the most recent versions. (Page 73)
•
Samsung Network Manager (
Samsung Network Manager is a program that has been developed to enable users to
configure the network and internet sharing settings easily. You can configure the network
settings by the location and you can configure the Internet sharing settings and perform
a network diagnosis. (Page 56)
•
Samsung Battery Manager (
Samsung Battery Manager is a power management program that provides easy-to-use
power management and power saving settings so that the battery usage time can be
extended. (Page 114)
•
Samsung Display Manager
Samsung Display Manager is a program that displays the setting status of some buttons
on the screen.
Example) The icon that appears when pressing the Menu button and clicking
Brightness Up.
Troubleshooting Functions
•
Magic Doctor (
Magic Doctor is troubleshooting software provided by Samsung Computer. A user can
diagnose system problems via one-click or by selecting diagnostic items. (Page 118)
•
Norton AntiVirus (
Norton AntiVirus is a program that examines a computer and deals with found viruses.
Since viruses may damage the files and data on your computer, it is recommended to
examine your system frequently with the Norton AntiVirus program. (Page 120)
Introducing Programs 66
Using Samsung Update Plus
Samsung Update Plus is software that examines and updates Samsung software and drivers installed
on your Samsung computer to the latest version. To use Samsung Update Plus, your computer has
to be connected to the Internet.
To Update Samsung Software and Drivers
Select Start > All Programs > Samsung > Samsung Update Plus > Samsung
Update Plus.
If this is the first time you are running the program, a window will appear asking you if
you agree to the agreement in the window.
Click Agree to use this software.
Click Search for and Install Updates and click the Search for New Updates button.
If there are available software or driver updates for your computer, the available updates
will be listed. Select the required updates from the list and click Install Update to start
the update.
(The update list on the screen may differ depending on the computer model.)
Updates that must be installed separately.
If you select Install as an update item that must be installed separately, a message
appears informing you of this. Follow the instruction message to correctly install it.
Automatic update items display
By default, your computer is configured to automatically search for updates. If there is a
new update available, this is notified in the notification area. Click the balloon help icon in
the notification area. Here you will be able to find the latest available updates.
Using Samsung Update Plus 67
To change the automatic update settings, click the Configuration button in Figure 2 and
change the settings.
Samsung Update Plus does not provide updates for additionally installed software and
device drivers.
Using Samsung Update Plus 68
Program Launcher
The Program Launcher categorizes frequently used programs, folders, web sites so that you can
easily manage and access them.
This program is designed for the small LCD size so that you can easily use this program with the
Stylus Pen or your fingers.
Program Launcher Screen Layout
When turning the computer on, the Program Launcher is launched.
If it does not appear automatically, click Start > All Programs > Microsoft Touch Pack
for Tablet PC > Program Launcher.
Battery Charge Status
When clicking the icon, the Power Option Properties window appears.
Wireless LAN Status
When clicking the icon, the Network Connections window appears.
View Taskbar
Clock
Minimize
Close
Shortcut
Icon
Category
Program Launcher 69
Using Program Launcher
For example, the procedures to launch the Calculator on the Program Launcher are described
below.
Run the Program Launcher.
Select More Programs > Calculator. The Calculator program is launched.
• For more detailed usage
For more detailed usage, click Program Launcher Help from the Tools category.
• Program Launcher User Setting functions
You can add a category and add or delete a shortcut icon.
Click on Customize Launcher from the Tools category to change the settings.
Program Launcher 70

Source Exif Data:
File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.4
Linearized                      : No
Modify Date                     : 2006:03:21 16:34:55-08:00
Create Date                     : 2006:03:21 16:34:36-08:00
Title                           : SAMSUNG Q1
Creator                         : FrameMaker 7.1
Producer                        : Acrobat Distiller 7.0.5 (Windows)
Page Count                      : 70
Mod Date                        : 2006:03:21 16:34:55-08:00
Creation Date                   : 2006:03:21 16:34:36-08:00
Metadata Date                   : 2006:03:21 16:34:55-08:00
Has XFA                         : No
EXIF Metadata provided by EXIF.tools
FCC ID Filing: A3L-NP-Q1

Navigation menu