Samsung Electronics Co NX2000 Digital Camera User Manual 2 of 4

Download:
Mirror Download [FCC.gov]
Document ID	1938443
Application ID	7wN+qElh5xj2+sbpD0GsxQ==
Document Description	User manual 2 of 4
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	195.84kB (2448033 bits)
Date Submitted	2013-04-13 00:00:00
Date Available	2013-10-10 00:00:00
Creation Date	2013-03-19 11:23:30
Producing Software	Adobe PDF Library 8.0
Document Lastmod	2013-03-19 11:23:30
Document Title	User manual 2 of 4
Document Creator	Adobe InDesign CS3 (5.0.4)

My Camera >
Shooting modes
Using Z
The Z allows you to zoom in on a subject with less degradation of
photo quality than the Digital zoom. However, the photo resolution may
change compared to when you zoom in by rotating the zoom ring.
Rotate the mode dial to P, A, S, M, or i.
Half-press [Shutter] to focus, and then press [Shutter] to
capture the photo.
• Z is not available when you capture burst shots.
• Z is not available when you capture photos in the RAW file format.
• Z is deactivated when you record videos by pressing the video
recording button.
• This function is not available when you set 3D Auto Mode in 3D mode.
Press [i-Function] on the lens to select Z.
• You can also press [i-Function], and then press [C/F] or drag the
screen to select Z.
Adjust the focus ring to select a zoom ratio.
• You can also scroll the jog dial or drag the screen to select an
option.
• Photo resolution varies according to the zoom ratio if you use the
Z.
3:2
16:9
1:1
x1.2
4560X3040 (13.9M)
4560X2568 (11.7M)
3040X3040 (9.2M)
x1.4
3888X2592 (10.1M)
3888X2184 (8.5M)
2592X2592 (6.7M)
x1.7
3264X2176 (7.1M)
3264X1840 (6.0M)
2176X2176 (4.7M)
x2
2736X1824 (5.0M)
2736X1536 (4.2M)
1824X1824 (3.3M)
These figures are based on the maximum resolution at each image ratio.
59
My Camera >
Shooting modes
s Smart mode
Option
Description
In Smart mode, you can capture photos with options that are preset for a
specific scene.
Rich Tones
Capture a photo with vibrant colors.
Panorama
Capture a wide panoramic scene in a single photo.
Waterfall
Capture scenes with waterfalls.
Silhouette
Capture subjects as dark shapes against a light
background.
Sunset
Capture scenes at sunset, with natural-looking reds
and yellows.
Night
Capture multiple photos in low light conditions
without a flash. The camera combines them to create a
single image that is brighter and has less blurring.
Fireworks
Capture scenes with fireworks.
Light Trace
Capture scenes with the light trailing in low-light
conditions.
Creative Shot
Capture photos with effects applied automatically.
Rotate the mode dial to s.
Select a scene.
• To select a shooting mode when the mode dial is set to s, press
[f] or touch
, and then select a desired mode.
Smart : Beauty Face
Set
Option
Description
Beauty Face
Capture a portrait with options to hide facial
imperfections.
Best Face
Capture multiple photos and replace faces to create
the best possible image.
Landscape
Capture still-life scenes and landscapes.
Macro
Capture small or close-up subjects.
Action Freeze
Capture subjects moving at high speed.
Half-press [Shutter] to focus, and then press [Shutter] to
capture.
60
My Camera >
Shooting modes
Using the Best Face mode
• Repeat steps 4 and 5 to replace the rest faces of the photo.
In Best Face mode, you can capture multiple photos and replace faces to
create the best possible image. Use this mode to select the best image for
each individual when capturing group photos.
Rotate the mode dial to s, and then select Best Face.
Align your subject in the frame, and then half-press [Shutter]
to focus.
Press [Shutter] to capture the photo.
Touch the best image from the 5 faces that were captured.
• The
icon will appear on the image that the camera recommends.
Touch
to save the photo.
• The camera captures 5 photos consecutively.
• The first photo is set as the background image.
• The camera automatically detects faces after shooting.
Touch a face to replace.
• Use a tripod to prevent your camera from shaking.
• The resolution is set to 5.9M or smaller.
61
My Camera >
Shooting modes
Capturing panoramic photos
Capture a 2D or 3D panoramic photo. Captured 3D panoramic photos can
be viewed only on a 3D TV or 3D monitor.
With [Shutter] pressed, slowly move the camera in the
direction you selected.
• In 3D Panorama mode, you can capture a scene only in horizontal
directions.
Rotate the mode dial to s, and then select Panorama.
• An arrow toward the direction of motion is displayed, and the entire
shooting image is displayed in the preview box.
Press [m] → 1 → Panorama → Live Panorama or 3D.
Press [m] to return to Shooting mode.
Press and hold [Shutter] to start shooting.
• When the scenes are aligned, the camera captures the next photo
automatically.
When you are finished, release [Shutter].
• The camera will automatically save the shots into one photo.
• If you release [Shutter] while shooting, the panoramic shooting
stops and photos that have been captured are saved.
62
My Camera >
Shooting modes
• The resolution varies depending on the panoramic photo you captured.
• In Panorama mode, some shooting options are not available.
• The camera may stop shooting due to the shooting composition or the
subject's movement.
• In Panorama mode, your camera may not capture the entire last scene if you
•
•
•
•
stop moving the camera to improve the photo quality. To capture the entire
scene, move your camera slightly beyond the point where you want the
scene to end.
In 3D Panorama mode, your camera may not capture the very beginning or
end of a scene due to the nature of the 3D effect. To capture the entire scene,
move slightly beyond the beginning and end points you want to capture.
Photos captured with the 3D function are saved in JPEG (2D) and MPO (3D)
formats. On your camera's display, you can view only JPEG files.
To view 3D files, connect your camera to a 3D TV or 3D monitor with an
optional HDMI cable. While viewing, wear proper 3D glasses.
Capturing photos in 3D Panorama mode may result in a less pronounced 3D
effect than those captured with a 3D lens. To increase the 3D effect, attach
the optional 3D lens and use 3D mode. (p. 65)
• For best results when capturing panoramic photos, avoid the following:
- moving the camera too quickly or too slowly
- moving the camera too little to capture the next image
- moving the camera at irregular speeds
- shaking the camera
- shooting in dark places
- capturing moving subjects nearby
- shooting conditions where the brightness or color of light is changing
• Photos taken are automatically saved, and shooting is stopped under the
following conditions:
- if you change the shooting direction while shooting
- if you move the camera too rapidly
- if you don't move the camera
63
My Camera >
Shooting modes
Recording a video
In Shooting mode, you can record Full HD videos (1920X1080) by pressing
(Video recording). The camera lets you record a video up to 29 minutes
and 59 seconds in length at 60, 30, 24, or 15 fps, and saves the files in
MP4 (H.264) format. 60 fps is available only with 1920X1080 and 1280X720
and 24 fps is available only with 1920X810. 15 fps is available only
with some Smart Filter options. The sound is recorded via the camera's
microphone.
You can set the exposure by adjusting the aperture value and shutter
speed for the mode you selected. When you use a lens that does not have
an AF/MF switch while recording a video, press [F] to deactivate or
activate the AF function. When you use the lens that has an AF/MF switch,
the AF function works according to the switch’s setting.
Rotate the mode dial to t, P, A, S, M, i, or s.
• This feature may not work in some modes.
Set the desired options.
Press
(Video recording) to start recording.
Press
(Video recording) again to stop.
• H.264 (MPEG-4 part10/AVC) is the latest video coding format established
•
•
Select Fader to fade in or out a scene. You can also select Voice, Wind Cut,
or other options to set recording options. (p. 105)
•
•
•
in 2003 collaboratively by ISO-IEC and ITU-T. Since this format uses a high
compression rate, more data can be saved in less memory space.
If you have the image stabilizer option on when shooting a movie, the
camera may record the image stabilizer sound.
The zoom sound or other lens sounds may be recorded if you adjust the lens
while recording a video.
When using an optional video lens, the autofocus noise is not recorded.
If you remove the camera lens while recording a movie, the recording will be
interrupted. Do not change the lens while recording.
If you attach an external microphone while recording a movie, sound will not
be recorded through the external microphone. (The previous settings are
maintained.) If you remove the external microphone while recording a movie,
sound will not be recorded. Turn off the camera before attaching or removing
the external microphone.
64
My Camera >
Shooting modes
• If you change the shooting angle of the camera suddenly while shooting a
•
•
•
•
•
•
•
movie, the camera may not be able to record images accurately. Use a tripod
to minimize camera shake.
The camera supports only the Multi AF function when recording a video. You
cannot use any other focus area setting functions, such as Face Detection AF.
When the size of a movie file exceeds 4 GB, the camera automatically stops
recording even if the maximum recording time (29 minutes and 59 seconds)
has not been reached.
If you use a slow writing memory card, the recording of your movie can
be interrupted because the card cannot process data at the rate the video
is being shot. If this occurs, replace the card with a faster memory card or
reduce the video size (for example, from 1280X720 to 640X480).
When formatting a memory card, always format using the camera. If you
format on another camera or a PC, you can lose files on the card or cause a
change in the capacity of the card.
When you press the video recording button, Z turns off.
While recording a video in the same ISO sensitivity, the screen may be darker
than taking a photo. Adjust the ISO sensitivity.
When you record a video in P, A, or S mode, ISO is automatically set to Auto.
3D mode
You can capture 3D photos or videos with an optional 3D lens.
SAMSUNG 45 mm F1.8 [T6] 2D/3D lens (example)
Set the 2D/3D switch on the lens to 3D, and then capture a photo or video
1.5-5 m away from the subject.
65
My Camera >
Shooting modes
• 3D mode is always on, regardless of the mode dial of the camera, except
B.
• To use auto 3D options that enable the camera to set shooting options
automatically depending on shooting conditions in 3D mode, press
[m] → 1 → 3D Auto Mode → On.
•
•
•
•
•
•
• To change the 3D recording option, press [m] → 6 →
3D REC Mode → a desired option.
•
* Default
Icon
Description
Side by Side*: Displays two images next to each other.
Frame Packing: Displays the images for the left and right eye
alternately in frames.
•
•
•
•
•
•
•
Available shooting options differ compared to other shooting modes.
You can select either 4.1M (2688X1512) or 2.1M (1920X1080) photo size.
The video resolution is set to 1920X1080.
Videos recorded in 3D may be dark or playback may be jittery.
Shooting in low temperatures may result in color distortion in images and
may consume more battery power.
You may not be able to shoot properly in conditions below 8.5 LV/900 lux. For
best results, capture photos in places with sufficient light.
When you photograph objects that contain polarizing material, such as a
display, sunglasses, or a polarizing filter, or use the polarizing material with
your lens, the images may appear dark or the 3D effect may not be applied
properly.
Use a tripod to prevent your camera from shaking.
If you rotate or tilt the camera vertically while shooting, the 3D effect may not
be applied properly. Capture images with the camera in the normal position.
If you shoot in fluorescent lighting or capture images displayed by projectors
or TVs, the images may appear black due to the flicker effect.
In 3D mode, the Enlarge x8 option of MF Assist may not be available.
The camera's display shows 3D videos only in 2D.
Photos captured with the 3D function are saved in JPEG (2D) and MPO (3D)
formats. On your camera's display, you can view only JPEG files.
To view 3D files, connect your camera to a 3D TV or 3D monitor with an
optional HDMI cable. While viewing, wear proper 3D glasses.
66
My Camera >
Shooting modes
Available functions by shooting mode
For details about shooting functions, see Chapter 2.
Press a shortcut for each function.
Function
Available in
Link AE to AF Point
(p. 98)
P/A/S/M
Framing Mode (p. 56)
P/A/S/M
OIS (Anti-Shake) (p. 88)
P/A/S/M/s*/t*
P/A/S/M/s*/t*/3D*
Function
Available in
Photo Size (p. 72)
P/A/S/M/s*/t/3D*
Quality (p. 73)
P/A/S/M/s*
Drive (Continuous/Burst/
Timer/Bracketing) (p. 89)
ISO (p. 74)
P/A/S/M
Metering (p. 96)
P/A/S/M
White Balance (p. 75)
P/A/S/M/3D*
Dynamic Range
(p. 99)
P/A/S/M
Picture Wizard (p. 78)
P/A/S/M/3D
Flash (p. 93)
P*/A*/S*/M*/s*/t*
Smart Filter (p. 100)
P/A/S/M
P/A/S/M/s*/3D*
P/A/S
AF Mode (p. 79)
Exposure compensation (p.
101)
AF Area (p. 82)
P/A/S/M/s*
Exposure lock (p. 102)
P/A/S
Touch AF (p. 85)
P/A/S/M/s*/t/3D*
MF Assist (p. 87)
P/A/S/M/s/t/3D*
Focus Peaking (p. 87)
P/A/S/M/s/t
* Some functions are limited in these modes.
67
Chapter 2
Shooting Functions
Learn about the functions you can set in Shooting mode.
You can enjoy more customized photos and videos by using the shooting functions.
Shooting Functions
Size and Resolution
Photo size
Icon
As you increase the resolution, your photo or video will include more
pixels, so it can be printed on larger paper or displayed on a larger screen.
When you use a high resolution, the file size will also increase. Select a low
resolution for photos that will be displayed in a digital picture frame or
uploaded to the web.
To set the size,
In Shooting mode, press [m] → 1 → Photo Size →
an option.
Size
Recommended for
5472x3648 (3:2)
Printing on A1 paper.
3888x2592 (3:2)
Printing on A2 paper.
2976x1984 (3:2)
Printing on A3 paper.
1728x1152 (3:2)
Printing on A5 paper.
5472x3080 (16:9)
Printing on A1 paper or viewing on an
HDTV.
3712x2088 (16:9)
Printing on A3 paper or viewing on an
HDTV.
2944x1656 (16:9)
Printing on A4 paper or viewing on an
HDTV.
1920x1080 (16:9)
Printing on A5 paper or viewing on an
HDTV.
3648x3648 (1:1)
Printing a square photo on A1 paper.
2640x2640 (1:1)
Printing a square photo on A3 paper.
2000x2000 (1:1)
Printing a square photo on A4 paper.
1024x1024 (1:1)
Printing a square photo on A5 paper.
Available options may differ depending on shooting conditions.
69
Shooting Functions >
Size and Resolution
Quality
Icon
The camera saves photos in either the JPEG or RAW format.
Photos captured by a camera are often transformed to the JPEG format
and stored in the memory according to the settings of the camera at the
time of shooting. RAW files are not transformed to the JPEG format and are
stored in the memory without any changes.
RAW files have the file extension “SRW”. To adjust and calibrate exposures,
White Balances, tones, contrasts, and colors of the RAW files, or to convert
them into JPEG or TIFF format, use the Adobe Photoshop Lightroom
program found on the supplied DVD-ROM.
Ensure you have enough space on the memory card to save photos in the
RAW format.
To set the quality,
Icon
In Shooting mode, press [m] → 1 → Quality →
an option.
Format
Description
JPEG
Super Fine:
• Compressed for the best quality.
• Recommended for printing in large size.
JPEG
Fine:
• Compressed for better quality.
• Recommended for printing in normal size.
Format
Description
JPEG
Normal:
• Compressed for normal quality.
• Recommended for printing in small size or
uploading to the web.
RAW
RAW:
• Save a photo without data loss.
• Recommended for editing after shooting.
RAW+JPEG
RAW + S.Fine: Save a photo in both the JPEG
(S.Fine quality) and RAW format.
RAW+JPEG
RAW + Fine: Save a photo in both the JPEG (Fine
quality) and RAW format.
RAW+JPEG
RAW + Normal: Save a photo in both the JPEG
(Normal quality) and RAW format.
Available options may differ depending on shooting conditions.
70
Shooting Functions
ISO sensitivity
The ISO sensitivity value represents the sensitivity of camera to light.
Examples
The larger the ISO value, the more sensitive the camera is to light.
Consequently, by selecting a higher ISO sensitivity value, you can capture
photos in dim or dark places at faster shutter speeds. However, this may
increase electronic noise and result in a grainy photo.
To set ISO sensitivity,
In Shooting mode, press [I] → an option.
ISO 100
ISO 400
ISO 800
ISO 3200
• You can also set the option by pressing [m] → 1 → ISO → an option
in Shooting mode.
• Increase the ISO value in places where flash use is prohibited. You can capture
a clear photo by setting a high ISO value without having to secure more light.
• Use the Noise Reduction function in order to reduce the visual noise that can
appear on photos of a high ISO value. (p. 145)
• Available options may differ depending on the shooting conditions.
71
Shooting Functions
White Balance
White Balance represents the light source that influences on the color of a
photo.
The color of a photo depends on the type and quality of the light source.
If you want the color of your photo to be realistic, select an appropriate
lighting condition to calibrate the White Balance, such as Auto WB,
Daylight, Cloudy, Tungsten, or adjust color temperature manually.
You can also adjust color for the preset light sources so that the colors of
the photo match the actual scene under mixed lighting conditions.
To set the White
Balance,
Icon
In Shooting mode, press [m] → 1 → White Balance →
an option.
Description
Auto WB: Use automatic settings depending on the lighting
conditions.
Daylight: Select when taking outdoor photos on a sunny day. This
option results in photos closest to the natural colors of the scene.
Icon
Description
Fluorescent White: Select when shooting under a daylight
fluorescent lamp. Especially for white fluorescent light with a color
temperature of about 4,200K.
Fluorescent NW: Select when shooting under a daylight
fluorescent lamp. Especially for white fluorescent light of very
white hues with a temperature of about 5,000K.
Fluorescent Daylight: Select when shooting under a daylight
fluorescent lamp. Especially for white fluorescent light of slightly
bluish hue with a temperature of about 6,500K.
Tungsten: Select when taking indoor photos under incandescent
bulbs or halogen lamps. Incandescent tungsten bulbs tend to have
a reddish hue. This option offsets that effect.
Flash WB: Select when using a flash.
Custom Set: Use your pre-defined settings. You can manually set
the White Balance by pressing [D], and then shooting a white
sheet of paper. Fill the spot metering circle with the paper and set
the White Balance.
Cloudy: Select when taking outdoor photos on a cloudy day or in
shadows. Photos captured on cloudy days tend to be more bluish
than on sunny days. This option offsets that effect.
72
Shooting Functions >
Icon
White Balance
Customizing preset White Balance options
Description
Color Temperature: Manually adjust the color temperature of
the light source. Color temperature is a measurement in degrees
Kelvin that indicates the specific type of light source. As the color
temperature increases, the color distribution becomes cooler.
Alternatively, as the color temperature decreases, the color
distribution becomes warmer. Press [D], and then adjust the
color temperature.
You can also customize preset White Balance options.
To customize
preset options,
In Shooting mode, press [m] → 1 → White Balance
→ an option → [D] → scroll the jog dial, or press
[D/I/C/F].
White Balance
Clear sky
Fluorescent H
Cloudy
Daylight
Fluorescent L
Back
Set
Reset
Halogen lamp
Tungsten
You can also touch an area on the screen.
Candle light
Available options may differ depending on shooting conditions.
73
Shooting Functions >
White Balance
Examples
Auto WB
Daylight
Fluorescent Daylight
Tungsten
74
Shooting Functions
Picture Wizard (photo styles)
Picture Wizard lets you apply different photo styles to your photo to create
various looks and emotional moods. You can also create and save your
own photo styles by adjusting color, saturation, sharpness, and contrast for
each style.
Examples
There is no rule for which style is suitable in which conditions. Experiment
with different styles and find your own settings.
To set a photo style,
In Shooting mode, press [m] → 1 → Picture Wizard
→ an option.
Standard
Vivid
Portrait
Landscape
Forest
Retro
Cool
Calm
Classic
• You can also adjust the value of the preset style settings. Select a Picture
Wizard option, press [D], and then adjust color, saturation, sharpness, or
contrast.
• To customize your own picture wizard, select , , or , and then adjust
the color, saturation, sharpness, and contrast.
• Picture Wizard options cannot be set with Smart Filter options at the same time.
75
Shooting Functions
AF mode
Learn how to adjust the camera’s focus according to the subjects.
You can select a focusing mode appropriate to the subject among Single
Auto Focus, Continuous Auto Focus, and Manual Focus. The AF function is
activated when you press [Shutter] halfway. In the MF mode, you have to
rotate the focus ring on the lens to focus manually.
In most cases, you can have a focus by selecting Single AF. Fast moving
subjects or subjects of a color similar to the background are difficult to
focus. Select an appropriate focusing mode for such instances.
To set the auto
focus mode,
In Shooting mode, press [F] → an option.
• You can also set the option by pressing [m] → 1 → AF Mode →
an option in Shooting mode.
• The available options may differ depending on the lens in use.
If your lens has an AF/MF switch, you must set the switch according to
the selected mode. Set the switch to AF when you select Single AF or
Continuous AF. Set the switch to MF when you select Manual Focus.
When your lens has no AF/MF switch, press [F] to select a desired AF
mode.
76
Shooting Functions >
AF mode
Single AF
Continuous AF
Single AF is appropriate for shooting a still subject. When you press
[Shutter] halfway, the focus fixes in the focus area. The area turns green
when the focus is achieved.
While you are pressing [Shutter] halfway, the camera continues to
automatic focusing. Once the focus area is fixed on the subject, the subject
is always in focus even when moving. This mode is recommended for
shooting a person on a bicycle, a running dog, or a car racing scene.
77
Shooting Functions >
AF mode
Manual focus
You can manually focus on a subject by rotating the focus ring on the
lens. The MF Assist function lets you easily achieve a focus. While you are
rotating the focus ring, the focus area is magnified. When you use the
Focus Peaking function, the color you selected appears on the focused
subject. This mode is recommended for shooting an object similar in color
to the background, a night scene, or fireworks.
If you use this function, you cannot set Touch AF, AF Area, and Link AE to AF
Point options.
78
Shooting Functions
AF area
The AF area function changes the positions of the focus area.
Selection AF
Generally, cameras focus on the nearest subject. When there are a lot of
subjects, however, unwanted subjects can be in focus. In order to prevent
unwanted subjects from being in focus, change the focus area so that
a desired subject is in focus. You can get a clearer and sharper photo by
selecting an appropriate focus area.
You can set the focus on an area you want. Apply an out-of-focus effect to
make the subject more distinguishable.
To set the auto
focus area,
The focus on the photo below was repositioned and resized so that it fits
the subject’s face.
In Shooting mode, press [m] → 1 → AF Area →
an option.
• Available options may differ depending on shooting conditions.
• When the AF/MF switch is set to MF, you cannot change the AF area from the
shooting menu.
• When you use the Face Detection AF option, the camera focuses on the area
with the white frame automatically.
• Depending on the Picture Wizard options, Face Detection may not be
effective.
• When you set manual focus, Face Detection may not be available.
• Face Detection may not be effective when:
- the subject is far from the camera
- it is too bright or too dark
- the subject is not facing the camera
- the subject is wearing sunglasses or a mask
- the subject’s facial expression changes drastically
- the subject is backlit or the lighting conditions are unstable
To resize or move the focus area, in Shooting mode, press [o]. Use the
navigation button to move the focus area. Scroll the jog dial to resize the focus
area.
79
Shooting Functions >
AF area
Multi AF
Face detection AF
The camera displays a green rectangle in places where focus is set
correctly. The photo is divided into two or more areas, and the camera
obtains focus points of each area. It is recommended for scenery photos.
The camera focuses on human faces preferentially. Faces of up to
10 people can be detected. This setting is recommended for shooting a
group of people.
When you press [Shutter] halfway, the camera displays the focus areas as
shown in the photo below.
When you press [Shutter] halfway, the camera focuses on faces as shown
in the photo below. In cases of shooting a group of people, the camera
displays the focus on the nearest person’s face in white and the rest of the
people’s faces in gray.
80
Shooting Functions >
AF area
Self-Portrait AF
It can be difficult to check whether your face is in focus when you are
taking a self-portrait. When this function is on, the beep from the camera
gets faster when your face is located at the center of the composition.
81
Shooting Functions
Touch AF
Focus on the subject or capture a photo by touching on the screen.
To set Touch AF,
In Shooting mode, press [m] → 1 → Touch AF →
an option.
Available options may differ depending on the shooting conditions.
Tracking AF
Tracking AF allows you to track and automatically focus on your subject,
even when the subject is moving or when you change the shooting
composition.
White frame: Your camera is
tracking the subject.
Touch AF
Touch AF allows you to focus on the subject that you touch on the screen.
Green frame: Your subject is
in focus when you half-press
[Shutter].
Red frame: Your camera failed to
focus.
82
Shooting Functions >
Touch AF
• If you do not select a focus area, the Auto Focus function does not work.
• Tracking a subject may fail when:
- the subject is too small
- the subject moves excessively
- the subject is backlit or you are shooting in a dark place
- colors or patterns on the subject and the background are the same
- the subject includes horizontal patterns, such as blinds
- the camera shakes excessively
• When tracking fails, the feature will be reset.
• If the camera fails to track the subject, the focus area will be reset.
• If the camera fails to focus, the focus frame will change to red and the focus
One touch shot
You can capture a photo with the touch of your finger. As you touch on a
subject, the camera focuses on the subject automatically and captures a
photo.
will be reset.
83
Shooting Functions
Focus assist
In the manual focus mode, you have to rotate the focus ring on the lens to
focus. When you use the MF Assist function or the Focus Peaking function,
you can achieve a clearer focus. This function is only available on a lens
that supports manual focus.
* Default
Option
Description
The focus area is magnified by 8 times when you rotate the
focus ring.
Enlarge x8
MF Assist
In the manual focus mode, you can enlarge the scene and easily adjust the
focus while rotating the focus ring.
To set the manual
focus assist,
In Shooting mode, press [m] → 1 → MF Assist →
an option.
* Default
Option
Description
Off
Do not use the MF Assist function.
The focus area is magnified by 5 times when you rotate the
focus ring.
Focus Peaking
In the manul focus mode, the color you selected appears on the focused
subject to help you focus while rotating the focus ring.
To set Focus
Peaking options,
In Shooting mode, press [m] → 1 → Focus Peaking →
an option.
Enlarge x5*
* Default
Option
Description
Level
Set a sensitivity for detecting the focused subject.
(Off, High, Normal*, Low)
Color
Set a color to appear on the focused subject.
(White*, Red, Green)
84
Shooting Functions
Optical Image Stabilization (OIS)
Use the Optical Image Stabilization (OIS) function to minimize camera
shake. OIS may not be available with some lenses.
Camera shake tends to occur in dark places or when shooting indoors.
In such cases, the camera uses slower shutter speeds in order to increase
the amount of light taken in, which can result in a blurry photo. You can
prevent this situation by using the OIS function.
If your lens has an OIS switch, you have set the switch to ON to use the OIS
function.
Without OIS correction
To set OIS options,
In Shooting mode, press [m] → 1 → OIS (Anti-Shake)
→ an option.
* Default
Icon
Description
With OIS correction
• OIS may not function properly when:
- you move your camera to follow a moving subject
- there is too much camera shake
- the shutter speed is slow (for example, when you select Night in
s mode)
Off: The OIS function is off. (This option may not be available with
some lenses.)
- the battery is low
- you capture a close-up shot
Mode 1*: The OIS function is applied only when you press
[Shutter] in full or half.
• If you use the OIS function with a tripod, your images may be blurred by
Mode 2: The OIS function is on.
•
•
•
•
•
the vibration of the OIS sensor. Deactivate the OIS function when you use a
tripod.
If the camera is hit or dropped, the display will be blurry. If this occurs, turn off
the camera, and then turn it on again.
Use the OIS function only when needed because the function consumes
more battery power.
To set an OIS option on the menu, set the OIS switch on your lens to ON.
This option may not be available with some lenses.
Off may not be available with some lenses.
85
Shooting Functions
Drive (shooting method)
You can set the shooting method such as Continuous, Burst, Timer and so
on.
Select Single to capture one photo at a time. Select Continuous or Burst
to shoot fast moving subjects. Select AE Bracket, WB Bracket, or P Wiz
Bracket to adjust exposure, White Balance, or apply Picture Wizard effects.
You can also select Timer to capture a photo of yourself.
To set the shooting
method,
Continuous
Continuously capture photos while you are pressing [Shutter]. You can
capture up to 5 photos (Continuous Normal) or 8.6 photos (Continuous
High) per second.
In Shooting mode, press [C] → an option.
• You can also set the option by pressing [m] → 1 → Drive →
an option in Shooting mode.
• Available options may differ depending on shooting conditions.
Single
Capture one photo whenever you press [Shutter]. Recommended for
general conditions.
If you select Continuous High, the noise reduction function is not available.
86
Shooting Functions >
Drive (shooting method)
Burst
Timer
Consecutively capture up to 10 shots per second (3 seconds), 15 shots per
second (2 seconds), or 30 shots per second (1 second) when you press
[Shutter] once. It is recommended for shooting the rapid motion of fast
moving subjects such as racing cars.
Capture a photo with a delay of 2 to 30 seconds. The delay is adjustable in
increments of 1 second.
• To set the number of shots, in Shooting mode, press [C] → Burst, and then
•
•
•
•
•
•
•
press [D].
The photo size is set to 5M.
It may take longer to save a photo.
You cannot use the flash with this option.
Shutter speed must be faster than 1/30 second.
Photos captured with this option may be slightly enlarged when saving.
You cannot set an ISO option higher than ISO 3200.
This option cannot be used with the RAW file format and is not available
when the photo quality is set to RAW.
To set the delay, in Shooting mode, press [C] → Timer, and then press [D].
87
Shooting Functions >
Drive (shooting method)
Auto Exposure Bracketing (AE Bracket)
White Balance Bracketing (WB Bracket)
When you press [Shutter], the camera captures 3 consecutive photos: the
original, one a step darker, and one a step lighter. Use a tripod to prevent
blurry photos as the camera captures three photos continuously. You can
adjust the settings in Bracket Set menu.
When you press [Shutter], the camera captures 3 consecutive photos:
the original and two more with different White Balance settings. The
original photo is captured when you press [Shutter]. The other two are
automatically adjusted according to the White Balance you have set. You
can adjust the settings in Bracket Set menu.
Exposure +2
Exposure -2
Original
WB+2
WB-2
Original
This option cannot be used with the RAW file format and is not available when
the photo quality is set to RAW.
88
Shooting Functions >
Drive (shooting method)
Picture Wizard Bracketing (P Wiz Bracket)
Bracketing setting
When you press [Shutter], the camera captures three consecutive photos,
each with a different Picture Wizard setting. The camera captures a photo
and applies the three Picture Wizard options you have set to the image
captured. You can select three different settings in Bracket Set menu.
You can set up the options for AE Bracket, WB Bracket, and P Wiz Bracket.
(p. 146)
To set a bracketing
option,
In Shooting mode, press [m] → 5 → Bracket Set →
an option.
Retro
Vivid
Standard
This option cannot be used with the RAW file format and is not available when
the photo quality is set to RAW.
89
Shooting Functions
Flash
In order to capture a realistic photo of a subject, the amount of light
should be constant. When the light source varies, you can use a flash and
supply a constant amount of light. Select appropriate settings according to
a light source and a subject.
To set flash options,
Icon
In Shooting mode, press [m] → 1 → Flash →
an option.
Description
Off: Do not use the flash.
Smart Flash: The camera automatically adjusts the brightness
of the flash according to the amount of light in the surrounding
environment.
Icon
Description
1st Curtain: The flash fires
immediately after the shutter opens.
The camera captures a photo of a
subject earlier in an action sequence
clearly.
Ball moving direction
2nd Curtain: The flash fires just
before the shutter closes. The
camera captures a photo of a
subject later in an action sequence
clearly.
Ball moving direction
Auto: The flash automatically fires in dark places.
Auto Red-eye: The flash automatically fires and reduces red-eyes.
Fill in: The flash fires whenever you capture a photo. (Brightness is
automatically adjusted.)
Fill-in Red: The flash fires whenever you capture a photo and
reduces red-eyes.
• The available options may differ depending on shooting conditions.
• There is an interval between two bursts of the flash. Do not move until the
flash fires a second time.
• If you select Off, the flash does not fire even when an external flash is
attached.
Use only Samsung-approved flashes. Using incompatible flashes may damage
your camera.
90
Shooting Functions >
Flash
Reducing the red-eye effect
Adjusting the flash intensity
If the flash fires when you capture a photo of a person in the dark, a red
glow may appear in the eyes. To reduce the red-eye effect, select Auto
Red-eye or Fill-in Red.
When the flash is on, adjust the flash intensity +/-2 levels.
To set the flash
intensity,
In Shooting mode, press [f] → Flash → an option → [D]
→ scroll the jog dial or press [C/F] to adjust the flash
intensity.
Flash : 0.0
Without red-eye reduction
With red-eye reduction
Back
Set
If the subject is too far from the camera or moves when the first flash fires, redeyes may not be reduced.
91
Shooting Functions >
Flash
• You can also drag the slider or touch +/- to adjust the intensity.
• Adjusting the flash intensity may not be effective when:
- the subject is too close to the camera
- you set a high ISO sensitivity
- the exposure value is too big or too small
• In some shooting modes, you cannot use this function.
• If you attach an intensity-adjustable external flash to the camera, the intensity
settings of the flash will be applied.
• If the subject is too close when you use the flash, some light may be blocked,
resulting in a dark photo. Ensure that the subject is within the recommended
range, which varies by lens.
• When a lens hood is attached, the light from the flash can be blocked by the
hood. Remove the hood to use the flash.
92
Shooting Functions
Metering
The metering mode refers to the way in which a camera measures the
quantity of light.
The camera measures the amount of light in a scene, and in many of its
modes, uses the measurement to adjust various settings. For example,
if a subject looks darker than its actual color, the camera captures an
overexposed photo of it. If a subject looks lighter than its actual color, the
camera captures an underexposed photo of it.
Multi
The Multi mode calculates the amount of light in multiple areas. When
light is sufficient or insufficient, the camera adjusts the exposure by
averaging the overall brightness of the scene. This mode is suitable for
general photos.
The brightness and overall mood of the photo can also be affected by how
the camera measures the amount of light. Select an appropriate setting for
a shooting condition.
To set a metering
option,
In Shooting mode, press [m] → 1 → Metering →
an option.
93
Shooting Functions >
Metering
Spot
Center-weighted
The Spot mode calculates the amount of light in the center. When you
capture a photo in conditions where there is a strong backlight behind a
subject, the camera adjusts the exposure so as to shoot a subject correctly.
For example, when you select the Multi mode in a strong backlight
condition, the camera calculates that the overall amount of light is
abundant, which results in a darker photo. The Spot mode can prevent this
situation as it calculates the amount of light in a designated area.
The Center-weighted mode calculates a broader area than the Spot mode
does. It sums up the amount of light in the center portion of the shot
(60–80 %) and that of the rest of the shot (20–40 %). It is recommended
for situations where there is a slight difference in brightness between a
subject and a background or an area of the subject is large compared to
the overall composition of the photo.
The subject is in bright color while the background is dark. The Spot mode
is recommended for a situation like this where a huge difference in the
exposure exists between a subject and a background.
94
Shooting Functions >
Metering
Measuring the exposure value of the focus area
When this function is turned on, the camera automatically sets an optimal
exposure by calculating the brightness of the focus area.
This function is only available when you select Spot metering or Multi
metering, and Selection AF.
To set this
function,
In Shooting mode, press [m] → 1 → Link AE to AF
Point → an option.
95
Shooting Functions
Dynamic Range
This function automatically corrects the loss of bright detail that can occur
due to shading differences in the photo.
In Shooting mode, press [m] → 1 →
Dynamic Range → an option.
To set Smart Range
options,
Without Dynamic Range effect
Icon
With Dynamic Range effect
Description
Off: Do not use Dynamic Range.
Smart Range+: Correct the loss of bright detail.
You cannot set ISO 100.
HDR: Capture 2 photos with different exposures, and then
combine them to create a single image automatically.
You cannot set an ISO option higher than ISO 3200.
96
Shooting Functions
Smart Filter
Smart Filter lets you apply special effects to your photos. You can select
various filter options to create special effects that are difficult to be
achieved with normal lenses.
To set Smart Filter
options,
Option
In Shooting mode, press [m] → 1 → Smart Filter →
an option.
Description
Off
No effect
Vignetting
Apply the retro-looking colors, high contrast, and strong
vignette effect of Lomo cameras.
Miniature
Apply a tilt-shift effect to make the subject appear in
miniature.
Colored Pencil
Apply a colored pencil painting effect.
Watercolor
Apply a watercolor painting effect.
Wash drawing
Apply a washed-out effect.
Oil Sketch
Apply an oil painting effect.
Ink Sketch
Apply an ink painting effect.
Acryl
Apply an acryl painting effect.
Option
Description
Negative
Apply a negative film effect.
Red
Desaturate all colors but red.
Green
Desaturate all colors but green.
Blue
Desaturate all colors but blue.
Yellow
Desaturate all colors but yellow.
Smart filter options cannot be set with Picture Wizard options at the same time.
97
Shooting Functions
Exposure compensation
The camera automatically sets the exposure by measuring the levels of
light from the photo’s composition and the position of a subject. If the
exposure set by the camera is higher or lower than you expected, you can
adjust the exposure value manually. The exposure value is adjustable in ±3
increments. The camera displays the exposure warning in red for each step
beyond ±3 range.
To adjust the exposure value, while holding down [W], scroll the jog
dial. You can also adjust the exposure value by pressing [f], and then
selecting EV.
+2
-2
Original
You can check the exposure value by the position of the exposure level
indicator.
Exposure warning
Standard exposure index
Exposure level
indicator
Decreased exposure
(darker)
Increased exposure
(brighter)
98
Shooting Functions
Exposure lock
When you cannot achieve an appropriate exposure because of a strong
color contrast, lock the exposure, and then capture a photo.
After locking the exposure, aim the lens where you desire, and then press
[Shutter].
To lock the exposure value, adjust the photo’s exposure, and then press the
custom button.
• Set a function of the custom button to AEL to lock the current exposure
value. (p. 149)
• This feature is not available in Manual mode.
99
Shooting Functions
Video functions
The functions available for video are explained below.
Movie quality
Set the Movie quality.
Movie size
To set movie
quality options,
Set the movie size.
To set movie size
options,
Icon
In Shooting mode, press [m] → 6 → Movie Size →
an option.
Size
Recommended for
1920X1080 (60 fps) (16:9)
View on a Full HDTV. (Playable only
on full HDTVs capable of playback at
60 fps.)
1920X1080 (30 fps) (16:9)
View on a Full HDTV.
1920X1080 (15 fps) (16:9)
View on a Full HDTV. (Available only
with some Smart Filter options.)
1920X810 (24 fps)
(Approx. 2.35:1)
View on an HDTV.
1280X720 (60 fps) (16:9)
View on an HDTV.
1280X720 (30 fps) (16:9)
View on an HDTV.
640X480 (30 fps) (4:3)
View on a TV.
320X240 (30 fps) (4:3)
Post on a website using the wireless
network (30 seconds maximum).
Icon
In Shooting mode, press [m] → 6 → Movie Quality →
an option.
Extension
Description
MP4 (H.264)
Normal: Record videos in normal quality.
MP4 (H.264)
HQ: Record videos in high quality.
100
Shooting Functions >
Video functions
Multi Motion
Fader
Set the playing speed of a video.
You can fade in or fade out a scene using the fader function on the camera
without having to do it on a PC. Set the fade in option to gradually fade in
at the start of the scene. Set the fade out option to gradually fade out the
scene. Use the function appropriately and add dramatic effects on your
videos.
To set playing
speed options,
Icon
In Shooting mode, press [m] → 6 → Multi Motion →
an option.
Description
x0.25: Record a video and play it at 1/4 normal speed. (Available
only with 640x480 or 320x240)
x0.5: Record a video and play it at 1/2 normal speed. (Available
only with 1280x720 (30 fps), 640x480, or 320x240)
To set fader
options,
Icon
In Shooting mode, press [m] → 6 → Fader →
an option.
Description
x1: Record a video and play it at normal speed.
Off: Fader function not used.
x5: Record a video and play it at 5X normal speed.
In: Scene gradually fades in.
x10: Record a video and play it at 10X normal speed.
Out: Scene gradually fades out.
x20: Record a video and play it at 20X normal speed.
In-out: The fader function is applied at the start and end of the
scene.
• If you select an option other than x1, sound will not be recorded.
• The available options may differ depending on shooting conditions.
When you use the fader function, it may take longer to save a file.
101
Shooting Functions >
Video functions
Voice
Sometimes, a muted video is more appealing than the one with sound.
Turn the voice off to record a muted video.
To set voice
options,
In Shooting mode, press [m] → 6 → Voice →
an option.
Wind cut
When you record videos in noisy environments, unintended sounds can
be recorded in videos. In particular, severe wind noise recorded in videos
distracts you from enjoying your videos. Use the Wind Cut function to
remove some surrounding noise in addition to wind noise.
To reduce wind
sound,
In Shooting mode, press [m] → 6 → Wind Cut →
an option.
102
Chapter 3
Playback/Editing
Learn about how to play back and edit photos and videos.
Refer to chapter 6 for editing files on a PC.
Playback/Editing
Searching and managing files
Learn how to view photo and video thumbnails and how to protect or
delete files.
If you perform no operations for a while, information and icons on the screen
disappear. When you operate the camera again, they will reappear.
Viewing image thumbnails
In order to search for photos and videos you want, convert to the
thumbnail view. The thumbnail view displays multiple images at a time
so that you can easily look through items you wish to find. You can also
classify and display files by category, such as date or file type.
Viewing photos
Press [y].
• The most recent file you captured will be displayed.
Scroll the jog dial to the left to select the thumbnail view mode.
(Scroll the jog dial to the right to return to the previous mode.)
Press [C/F] to scroll through files.
• You can also drag the image left or right to move to another file.
You may not be able to edit or play back files that were captured with other
cameras, due to unsupported sizes or codecs. Use a computer or another device
to edit or play back these files.
104
Playback/Editing >
Searching and managing files
Viewing files by category
Viewing files as a folder
In the thumbnail view, press [m] → z → Filter →
a category.
Continuous and burst shots appear as a folder. Selecting a folder will play
back all photos automatically. Deleting a folder will delete all photos in the
folder.
• You can also touch FILTER to select a category.
* Default
Option
Description
All*
View files normally.
Date
View files by the date they were saved.
Type
View files by the file type.
Location
View files by the place they were saved. (Only the
photos captured with an optional GPS module have
the location information.)
Select a list to open it.
Select a file to view it.
Touch
In Playback mode, press [C/F] or drag the image left or
right to move to a desired folder.
• The camera will automatically play back photos in the folder.
Scroll the jog dial to the right to open the folder.
• You can also touch the folder on the screen to open the folder.
to return to the previous view.
Press [C/F] or drag the image left or right to move to
another file.
Scroll the jog dial to the left to return to Playback mode.
105
Playback/Editing >
Searching and managing files
Lock/Unlock all files
Protecting files
Protect your files from accidental deletion.
Lock or unlock all files.
In Playback mode, press [m] → z → Protect → Select.
In Playback mode, press [m] → z → Protect → All.
Press [C/F] to select a file, and then press [o].
Select an option.
Press [f].
You cannot delete or rotate a protected file.
Option
Description
Lock
Lock all files.
Unlock
Unlock all files.
Cancel
Return to the previous menu.
106
Playback/Editing >
Searching and managing files
Deleting multiple files
Deleting files
Delete files in Playback mode and secure more space on your memory
card. Protected files are not deleted.
You can select multiple files and delete them.
• Alternatively, in thumbnails view, press [n], and then select files to
Deleting a single file
You can select a single file and delete it.
In Playback mode, select a file, and then press [n].
When the pop-up message appears, select Yes.
In Playback mode, press [m] → z → Delete → Select.
delete.
Select files you want to delete by pressing [C/F], and then
press [o].
• Press [o] again to cancel your selection.
Press [n].
When the pop-up message appears, select Yes.
107
Playback/Editing >
Searching and managing files
Deleting all files
You can delete all files on the memory card at once.
In Playback mode, press [m].
Select z → Delete → All.
When the pop-up message appears, select Yes.
108
Playback/Editing
Viewing photos
Enlarging a photo
Viewing a slide show
You can enlarge photos when viewing them in Playback mode. You can
also use the Trim function to extract the portion of the image displayed on
the screen and save it as a new file.
You can view photos in a slide show, apply various effects to the slide
show, and play background music.
In Playback mode, press [m].
Select z → Slide Show Options.
Select a slide show effect option.
Magnified area
Magnification (the maximum
magnification may differ by
resolution)
• Skip to step 4 to start a slide show with no effects.
Full Image
* Default
Crop
Scroll the jog dial to the right to enlarge a photo.
(Scroll the jog dial to the left to reduce a photo.)
To
Do this
Move magnified area
Press [D/I/C/F].
Crop the enlarged image
Press [f]. (saved as a new file)
Return to the original image
Press [o].
Option
Description
Play Mode
Set whether or not to repeat the slide show.
(One Play*, Repeat)
Interval
Set the interval between photos. (1 sec*, 3 sec, 5 sec,
10 sec)
Music
Set background audio.
Effect
• Set a scene change effect between photos.
• Select Off to cancel effects.
109
Playback/Editing >
Viewing photos
Press [m].
Creating a print order (DPOF)
Select Start Slide Show.
DPOF (Digital Print Order Format) lets you set the print size of a photo and
the number of copies to be printed.
View the slide show.
The camera saves the DPOF information in the MISC folder of your memory
card. If you have set DPOF information for your images, you can take the
memory card to a digital printing shop for printing. You cannot set the
print order of RAW format files.
• Press [o] to pause.
• Press [o] again to resume.
• Press [m] to stop the slide show and return to Playback mode.
• Press [D/I] to adjust the volume level.
Photos with dimensions that are wider than the paper may be cut off
on the left and right edges. Ensure that your photo dimensions are
compatible with the paper you select.
Auto rotating
In Playback mode, select a photo, and then press [m].
With Auto Rotate on, the camera automatically rotates photos you have
captured vertically so they fit the screen horizontally.
Select z → DPOF.
Press [D/I] to set the number of copies.
To set auto rotate
options,
In Playback mode, press [m] → z → Auto Rotate →
an option.
• To select another photo, press [C/F].
Press [o] to save.
110
Playback/Editing
Playing videos
In Playback mode, you can play a video, capture an image from a video, or
crop a video to save as another file.
Stop
Capture
Video viewing controls
Icon/Button
Description
/[C]
/ /[o]
/[F]
/[D/I]
View previous file/Scan backward. (Each time you
touch the icon or press the button while playing the
video, you change the scan speed in this order: 2X, 4X,
8X.)
Trimming a video during playback
In Playback mode, scroll to a video, and then touch
Press [o] or touch to start playing the video.
Press [o] or touch at the point where you want the trimming
to begin.
Press [f] or touch Start Point.
Press [o] or touch to resume playing the video.
Press [o] or touch at the point where you want the trimming
to end.
Pause or resume playback.
View next file/Scan forward. (Each time you touch the
icon or press the button while playing the video, you
change the scan speed in this order: 2X, 4X, 8X.)
Adjust the volume or mute the sound.
111
Playback/Editing >
Playing videos
Press [f] or touch End Point.
Capturing an image during playback
Press [f] or touch Trim to trim a video.
While viewing a video, press [o] or touch at the point where
you want to capture an image.
Press [f] or touch Capture.
• You can adjust the scene to be cropped by dragging the handles
that appear on the progress bar.
When the pop-up message appears, select Yes.
• You cannot trim a video recorded in 3D mode.
• The original video should be at least 10 seconds long.
• The camera will save the edited video as a new file and leave the original
• You cannot capture an image from a video recorded in 3D mode.
• The resolution of the captured image will be the same as the original video.
• The captured image is saved as a new file.
video intact.
112
Playback/Editing
Editing photos
Perform photo editing tasks, such as resizing, rotating, or reducing red-eye
effects. Edited photos are saved as new files under different file names.
Photos captured in some modes cannot be edited with the Image Edit
function.
To edit images,
In Playback mode, scroll to a photo, and then touch
an option.
→
• You can also edit images in Playback mode by selecting a photo, and then
pressing [f] or [m] → Edit Image.
• Some images may not be edited with the Image Edit function. In this case, use
a supplied image editing software.
• The camera will save edited photos as new files.
• When you edit photos, the camera will automatically convert them to a lower
Cropping a photo
Touch
Drag the corners of the box to adjust the size of the area.
Drag the box to move the location of the area.
Touch OK.
Touch
→
to save.
resolution. Photos that you rotate or resize manually are not automatically
converted to a lower resolution.
• You cannot edit photos while viewing files as a folder. Open the folder and
select a photo to edit each photo.
113
Playback/Editing >
Editing photos
Rotating a photo
Resizing photos
Touch
Change the size of a photo and save it as a new file.
Touch an option.
→
Rotate : Right 90°
Touch
Touch an option.
→
Resize : 10.1M 3:2
Touch OK.
Touch
to save.
• You can also rotate a photo in Playback mode by pressing [m], and then
selecting z → Rotate → a desired option.
• The camera will overwrite the original file.
Touch OK.
Touch
to save.
Available resize options differ depending on the original size of the photo.
114
Playback/Editing >
Editing photos
Adjusting your photos
You can correct captured photos by adjusting the brightness, contrast, or
saturation.
Touch
Touch an adjusting option.
Icon
Press [C/F] to adjust the option.
• You can also drag the slider or touch +/- to adjust the option.
Touch OK.
Touch
to save.
Description
Original (Reset to the original image)
Auto adjustment
Brightness
Contrast
Saturation
RGB
Color Temperature
Exposure
Hue
115
Playback/Editing >
Editing photos
Retouching faces
Reducing red-eye
Touch
Touch
Press [C/F] to adjust the option.
Touch OK.
→
• You can also drag the slider or touch +/- to adjust the option.
• As the number increases, the skin tone becomes brighter and
smoother.
• To cancel correction, touch
Touch
to save.
Touch OK.
• To cancel correction, touch
→
Touch
to save.
116
Playback/Editing >
Editing photos
Applying Smart Filter effects
Apply special effects to your photos.
Touch
, and then touch an option.
Smart Filter : Vignetting
Option
Description
Original
No effect
Vignetting
Apply the retro-looking colors, high contrast,
and strong vignette effect of Lomo cameras.
Miniature
Apply a tilt-shift effect to make the subject
appear in miniature.
Colored Pencil
Apply a colored pencil painting effect.
Watercolor
Apply a watercolor painting effect.
Wash drawing
Apply a washed-out effect.
Option
Description
Oil Sketch
Apply an oil painting effect.
Ink Sketch
Apply an ink painting effect.
Acryl
Apply an acryl painting effect.
Negative
Apply a negative film effect.
Red
Desaturate all colors but red.
Green
Desaturate all colors but green.
Blue
Desaturate all colors but blue.
Yellow
Desaturate all colors but yellow.
Touch OK.
Touch
to save.
117
Chapter 4
Wireless network
Learn how to connect to wireless local area networks (WLANs) and use functions.

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.4
Linearized                      : Yes
Page Count                      : 60
XMP Toolkit                     : 3.1-701
Producer                        : Adobe PDF Library 8.0
Creator Tool                    : Adobe InDesign CS3 (5.0.4)
Create Date                     : 2013:03:19 11:23:30+09:00
Modify Date                     : 2013:03:19 11:23:30+09:00
Creator                         : Adobe InDesign CS3 (5.0.4)

EXIF Metadata provided by EXIF.tools