Samsung Electronics Co ROH20S RF Control handle User Manual 3
Samsung Electronics Co Ltd RF Control handle 3
Contents
User Manual 3
| Download: |  |
| Mirror Download [FCC.gov] | |
| Document ID | 2624064 |
| Application ID | VRmg295PeMns9sB2+AW1IA== |
| Document Description | User Manual 3 |
| Short Term Confidential | No |
| Permanent Confidential | No |
| Supercede | No |
| Document Type | User Manual |
| Display Format | Adobe Acrobat PDF - pdf |
| Filesize | 482.43kB (6030385 bits) |
| Date Submitted | 2015-05-26 00:00:00 |
| Date Available | 2015-05-26 00:00:00 |
| Creation Date | 2015-05-18 09:18:23 |
| Producing Software | Adobe PDF Library 10.0.1 |
| Document Lastmod | 2015-05-18 09:18:23 |
| Document Title | User Manual 3 |
| Document Creator | Adobe InDesign CS6 (Macintosh) |
maintain tools and filter Accessories (SC12F50P Series) • Push the accessory onto the end of the hose handle. • Pull out the dusting brush to use the crevice tool. • Push the accessory onto the end of the pipe. • Pull out the dusting brush to use the crevice tool. English - 16 DJ68-00699W-07.indb 16 15. 4. 27. �� 10:28 MAINTAIN FLOOR TOOLS 2-Step Brush (Optional) 03 maintain tools and filter Carpet Cleaning Floor Cleaning • Adjust the inlet lever according to the floor surface. • Remove waste matter completely if the inlet is blocked. Power Pet Plus Brush (Optional) For improved pickup of pet hair and fibre on carpets. Frequent vacuuming of hair or pet fur may cause a falling-off of the rotation due to matters tangled around the drum. In this case, clean the drum with care. 1. 2. 3. 4. 5. 6. Push the Open button of the transparent screen cover to separate the cover. Remove the brushbar from the transparent screen. Remove waste matter such as dust and hair tangled around the brushbar using scissors. Remove dust inside the brush housing using a dry duster or crevice tool. Insert brushbar into rotating belt and assemble. Click the transparent screen cover back into place to reassemble. Parquet Master Brush (Optional) • Vacuum dust in wide area at once. • Remove waste matter completely if the inlet is blocked. English - 17 DJ68-00699W-07.indb 17 15. 4. 27. �� 10:28 maintain tools and filter Mini turbo brush (Optional) - To replace brushroll 1. If a clog is present or debris is visible, unscrew the two screws on the back of the Mini turbo brush to remove the faceplate and clear any obstructions. 2. Inspect condition of brushroll. Replace brushroll if brushes are worn down. To remove brushroll, pull up and out of end slots in nozzle housing. Insert ends of brushroll into same slots to replace. Inspect belt to ensure that it is in good condition. If belt is broken or cracked, replace belt according to To Replace Belt instructions. 3. Using at MAX. Press the MAX button to operate the vacuum at maximum intake. - To replace belt 1. Remove bottom plate. See figure in to replace brushroll instructions. 2. Loop one end of new belt around shaft of pulley. 3. Loop other end of belt around designated area for it on brushroll. Insert brushroll into slots in nozzle housing. See figure in to replace brushroll instructions. 4. Fit Mini turbo brush back together as described in to replace brushroll instructions. English - 18 DJ68-00699W-07.indb 18 15. 4. 27. �� 10:28 EMPTYING THE DUST BIN Once dust reaches the dust full mark, empty the dust bin. Take the dust bin out by pushing the button. Separate the dust bin cover. Click 03 maintain tools and filter Throw the dust away in the bin. Close the dust bin cover. Before use, push the dust bin into the main body of the vacuum cleaner until you hear the “click” sound. • Empty into a plastic bag. (recommended for asthma/allergy sufferers) You may rinse the dust bin with cold water. English - 19 DJ68-00699W-07.indb 19 15. 4. 27. �� 10:28 maintain tools and filter CLEANING THE DUST FILTER When to clean the dust filter • The lamp will turn red when suction is reduced. If the light comes on, please clean the dust filter. • Turn the vacuum power to ‘MAX’. Body Control Handle Control • If the filter check indicator turns red with the inlet floating 10cm above flat floor, clean the dust pack. When suction is noticeably reduced continuously or vacuum cleaner abnormally overheats, please clean the dust pack. English - 20 DJ68-00699W-07.indb 20 15. 4. 27. �� 10:28
Source Exif Data:
File Type : PDF File Type Extension : pdf MIME Type : application/pdf PDF Version : 1.6 Linearized : No Tagged PDF : Yes XMP Toolkit : Adobe XMP Core 5.4-c005 78.147326, 2012/08/23-13:03:03 Modify Date : 2015:05:18 09:18:23+09:00 Create Date : 2015:05:18 09:18:23+09:00 Metadata Date : 2015:05:18 09:18:23+09:00 Creator Tool : Adobe InDesign CS6 (Macintosh) Format : application/pdf Document ID : uuid:cbdf8f8d-9237-4654-b2ef-00b8ebc89d21 Instance ID : uuid:e36b02ef-26b2-4c36-95b2-ec99fa5bcfad Producer : Adobe PDF Library 10.0.1 Page Count : 5 Creator : Adobe InDesign CS6 (Macintosh)EXIF Metadata provided by EXIF.tools