Samsung Electronics Co SCHA650 Tri-Mode Dual-Band Analog/ PCS Phone (AMPS/CDMA) User Manual

Download:
Mirror Download [FCC.gov]
Document ID	365103
Application ID	p5BvoDUC+RvdFewezvgroA==
Document Description	Users Manual
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	288.99kB (3612329 bits)
Date Submitted	2003-10-15 00:00:00
Date Available	2003-10-14 00:00:00
Creation Date	2003-10-01 13:42:55
Producing Software	Acrobat Distiller 5.0 (Windows)
Document Lastmod	2003-10-10 15:16:50
Document Title	Users Manual

* Some contents of this manual may differ from your phone
depending upon the software of the phone or your service
provider.
CELLULAR PHONE
SCH-A650
User’s Manual
Draft version
(2003/06/04)
ELECTRONICS
World Wide Web
http://www.samsungmobile.com
Printed in Korea
Code No.: GH68-03XXXA
English. 06/2003.Rev.1.0
Please read this manual before operating your phone, and keep it
for future reference.
FCC RF EXPOSURE INFORMATION
In August 1996 the Federal Communications Commission (FCC) of
the United States with its action in Report and Order FCC 96-326
adopted an updated safety standard for human exposure to radio
frequency electromagnetic energy emitted by FCC regulated
transmitters. Those guidelines are consistent with the safety
standards previously set by both U.S. and international standards
bodies. The design of this phone complies with the FCC guidelines
and these international standards.
Use only the supplied antenna or one that is approved.
Unauthorized antennas, modifications, or attachments could impair
call quality, damage the phone, or result in a violation of FCC
regulations.
Do not use the phone with a damaged antenna. If a damaged
antenna comes into contact with the skin, a minor burn may result.
Please contact your local dealer for a replacement antenna.
Body-worn Operation
This device was tested for typical body-worn operations using the
optional belt-clip/holster placed 1.8cm from the body.
To comply with FCC RF exposure requirements, a minimum
separation distance of 1.8 cm must be maintained between the
user’s body and the back of the phone, including the antenna, whether
extended or retracted. The use of belt-clips, holsters or similiar
accessories should not conatin metallic components. The use of
accessories that do not satisfy the requirements may not comply
with RF exposure requirements, and shgould be avoided.
Vehicle Mounted External Antenna (optional, if
available.)
A minimum separation distance of 7.9 inches (20cm) must be
maintained between a person and the vehicle mounted external
antenna to satisfy FCC RF exposure requirements.
Table of Contents
Important Safety Precautions .................................................. 7
Unpacking ................................................................................... 9
Your Phone
Phone Layout ...............................................................................
Display .........................................................................................
Backlight ......................................................................................
LED Indicator ................................................................................
10
13
15
16
Getting Started
Using the Battery .........................................................................
Switching the Phone On or Off ......................................................
Using the Soft Keys ......................................................................
Your Phone’s Modes ......................................................................
17
21
22
23
Call Functions
Making a Call ...............................................................................
Emergency Dialing ........................................................................
Redialing the Last Number ............................................................
Making a Call from Phonebook .....................................................
Prepend Dialing ............................................................................
Speed Dialing ...............................................................................
Pause Dialing ...............................................................................
Voice Dialing ................................................................................
Adjusting the Volume ....................................................................
Answering a Call ...........................................................................
Options During a Call ....................................................................
Using Caller ID .............................................................................
Viewing Missed Calls .....................................................................
Call Waiting ..................................................................................
Three-Way Calling .........................................................................
26
27
27
28
28
29
31
34
35
36
37
38
38
39
40
For more information about RF exposure, please visit the FCC web
site at www.fcc.gov
Entering Text
Changing the Text Input Mode ......................................................
Using the T9 (English) Mode .........................................................
Using the Alphabet Mode ..............................................................
Using the Symbol Mode ................................................................
Using the Number Mode ...............................................................
Wireless Web
42
43
45
47
47
Using the Menus
Accessing a Menu Function by Scrolling ......................................... 48
Accessing a Menu Function by Using Its Shortcut ............................ 49
List of Menu Functions .................................................................. 50
Calls
Outgoing (MENU 1-1) .............................................................
Incoming (MENU 1-2) .............................................................
Missed (MENU 1-3) .................................................................
Erase Logs (MENU 1-4) ............................................................
Call Timer (MENU 1-5) ............................................................
53
54
55
55
56
Phone Book
Find (MENU 2-1) .....................................................................
Add New Entry (MENU 2-2) .....................................................
Rename Group (MENU 2-3) .....................................................
My Phone Number (MENU 2-4) ...............................................
Memory (MENU 2-5) ...............................................................
57
59
61
62
62
Messages
Send New Message (MENU 3-1) ................................................ 64
Voice (MENU 3-2) .................................................................... 67
Inbox (MENU 3-3) ................................................................... 68
Outbox (MENU 3-4) ................................................................ 69
Draft Message (MENU 3-5) ...................................................... 70
Saved Message (MENU 3-6) ..................................................... 70
Web Alert (MENU 3-7) ............................................................. 71
Message Setting (MENU 3-8) ................................................... 72
About the Web Browser ................................................................
Get In Web (MENU 4-1) ...........................................................
Prompt (MENU 4-2) ................................................................
Get it Now ....................................................................................
75
76
81
82
Planner
Today (MENU 5-1) .................................................................. 85
Scheduler (MENU 5-2) .............................................................. 87
Jump To Date (MENU 5-3) ...................................................... 89
To Do List (MENU 5-4) ............................................................ 90
Memo Pad (MENU 5-5) ........................................................... 91
Count Down (MENU 5-6) ......................................................... 92
Alarm Clock (MENU 5-7) ......................................................... 94
World Time (MENU 5-8) .......................................................... 95
Calculator (MENU 5-9) ............................................................ 96
Display
Animation (MENU 6-1) ............................................................
Banner (MENU 6-2) ................................................................
Backlight (MENU 6-3) .............................................................
Contrast (MENU 6-4) ..............................................................
Auto Hyphen (MENU 6-5) ......................................................
97
97
98
98
98
Sounds
Volume/Vibrate (MENU 7-1) ................................................... 99
Ringer Type (MENU 7-2) ....................................................... 100
Key Beep (MENU 7-3) ........................................................... 101
Alerts (MENU 7-4) ............................................................. 101
Power On/Off (MENU 7-5) ..................................................... 102
Roam Ringer (MENU 7-6) ..................................................... 103
Whisper Mode (MENU 7-7) ................................................ 103
Voice Kit
Voice Dial (MENU 8-1) .......................................................... 104
Voice Memo (MENU 8-2) ....................................................... 107
Call Screen (MENU 8-3) .......................................................... 108
Setup
Location (MENU 9-1) .............................................................
Network (MENU 9-2) .............................................................
Data/Fax (MENU 9-3) ..........................................................
Security (MENU 9-4) .........................................................
Call Answer (MENU 9-5) ........................................................
Auto Answer (MENU 9-6) ......................................................
Auto Retry (MENU 9-7) .........................................................
Language (MENU 9-8) ..........................................................
Clock Set (MENU 9-9) ............................................................
Version (MENU 9-0) ..............................................................
112
112
114
115
119
120
120
120
121
122
Health and Safety Information
Exposure to Radio Frequency (RF) Signals ...................................
For Body Operation ....................................................................
Precautions When Using Batteries ...............................................
Road Safety ................................................................................
Operating Environment................................................................
Potentially Explosive Environment................................................
Emergency Calls .........................................................................
Other Important Safety Information .............................................
Care and Maintenance .................................................................
Acknowledging Special Precautions and the FCC
and Industry Canada Notice .........................................................
123
125
126
128
130
133
134
135
136
137
Glossary ..................................................................... 139
Index........................................................................... 142
Important Safety
Precautions
Read these guidelines before using your wireless
phone. Failure to comply with them may be dangerous
or illegal.
Road Safety at All Times
Do not use a hand-held phone while driving; park the
vehicle first.
Switching Off When Refueling
Do not use the phone at a refueling point (service
station) or near fuels or chemicals.
Switching Off in Aircraft
Wireless phones can cause interference. Using them
in aircraft is both illegal and dangerous.
Switching Off in Hospitals
Switch your phone off near medical equipment.
Follow any regulations or rules in force.
Interference
All wireless phones may be subject to interference,
which could affect their performance.
Special Regulations
Meet any special regulations in force in any area and
always switch off your phone whenever it is forbidden
to use it, or when it may cause interference or danger
(in a hospital for example).
Important Safety Precautions
Unpacking
Sensible Use
Use only in the normal position (held to the ear). Avoid
unnecessary contact with the antenna when the phone
is switched on.
Please Check!!!
Your package contains the following items:
Emergency Call
Ensure the phone is switched on and in service.
Key in the emergency number for your present
location, then press the SEND key. You must
deactivate any unnecessary features before you can
make an emergency call. Give all the necessary
information as accurately as possible. Do not cut off
the call until given permission to do so.
Handset
Position only!!!
Water Resistance
Your phone is not water-resistance. Keep it dry.
Travel Adapter
Accessories and Batteries
Use only Samsung-approved accessories and batteries.
Use of unauthorized accessories could damage your
phone and may be dangerous.
Qualified Service
Only qualified service personnel may install or repair
your phone.
For more detailed safety information, see “Health and
Safety Information” on page xx.
Battery
Hand Strap
Position only!!!
User’s Manual
Leather Case
Position only!!!
Ear-microphone
In addition, you can obtain the following accessories
for your phone from your local Samsung dealer:
•
•
•
•
•
•
•
Ear-microphone
Travel adapter
Slim and standard batteries
Cigarette lighter adapter
Hands-free car kit
Data cable
Leather case
Your Phone
Your Phone
Closed View
Antenna
Phone Layout
LED indicator
The following illustrations shows the main elements of
your phone:
Open View
Earpiece
Speaker
Key(s)
Folder
Display
Functions
Perform the functions indicated by the
text above them, on the bottom line of
(Soft keys) the display.
Selects the current menu or option.
In Menu Mode, scroll through the menu
options and Phonebook memory.
In Standby Mode, directly access you to
(Navigation
the following menus:
keys)
Ear-microphone
jack
• Up: Voice Memo
• Down: Message
• Left: Get In Web
• Right: Get it Now For more information
about this menu, see page 82.
Volume keys
Microphone
Adapter outlet
10
Makes or answers a call.
In Standby Mode, retrieves the last
outgoing numbers you dialed. Redials the
last outgoing number when pressed twice.
11
Your Phone
Key(s)
Functions (continued...)
Your Phone
Key
Functions (continued...)
During a call, adjust the voice volume.
Ends a call. Also switches the phone on
and off when held down.
In Standby Mode with the folder open,
adjust the keypad tone volume.
In Menu Mode, scroll through the menu
options.
In Menu Mode, cancels your input and
returns to Standby Mode.
Deletes characters from the display.
In Menu Mode, returns to the previous
menu level.
Enter numbers, letters and some special
characters.
In Standby Mode, initiates the voice
dialing feature when held down.
While entering text, allows you to change
the case.
Display
Layout
The display has three areas; an upper line of various
icons, the lower text and graphic area and the last line
containing the soft key indicators.
Also, use this key for the special star
calling feature.
In Standby Mode, enters or exits the silent
mode when held down.
Also, use this key when you make a call to
an automated system, especially when
using teleservices.
12
Icons
Position only!!!
Menu
Contacts
Text and
graphic area
Soft key
indicators
13
YoYuoruPr hPohnoene
Icons
Your Phone
Icon images required!!!
Signal Strength : Shows the received
signal strength. The greater the number of
bars, the better the signal.
Service: Appears when a call is in
progress.
No Service: Appears when you are
outside a service area. When it appears,
you cannot make or receive calls.
New Message: Appears when a new
message is received.
Vibration: Appears when you set the
ringer volume for calls to Vibrate or
High+Vib or when the phone is in the
silent mode.
Silent mode: Indicates when the phone is
in the silent mode.
1x Mode: Indicates that your phone is
sending or receiving data at a high speed.
Battery Status: Shows the level of your
battery. The more bars you see, the more
power you have left.
Alarm: Appears when you set an alarm to
ring at a specified time.
Roaming: Appears when you are out of
your home area and have logged onto a
different network, when traveling in other
countries, for example.
Ringer Off: Appears when the ringer
volume is turned off.
GPS (911 only): represents Global
Positioning Service (GPS) for 911.
GPS: Indicates GPS is on for location.
14
Backlight
The display and the keypad are illuminated by a
backlight. When you press any key or open the folder,
the backlight illuminates. It turns off if no key is
pressed within a given period of time, depending on
the Backlight option set in the Display menu. The
backlight remains on at all times when the phone is
connected to an optional car kit.
To specify the length of time for which the backlight is
active, set the Backlight menu (MENU 6-3). See
page xx for further details.
15
Your Phone
Getting Started
Note: In Standby Mode or Talk Mode, the display
automatically turns off after some time,
depending on your setting in the Backlight
menu to conserve your battery power. Press
any key to turn the display on.
LED Indicator
Using the Battery
Your Samsung phone comes packaged with a partially
charged, rechargeable Lithium Ion (Li-ion) battery.
Installing the Battery
The LED indicator is on the top right of the phone. It
flashes to indicate incoming calls or messages. The
light also glows for a few seconds when you turn the
phone on or off and turns to red to indicate that the
battery is being charged.
1. Place the battery back on the phone so that its tabs
match the grooves on the phone.
LED indicator
2. Gently push the top end of the battery down until
you hear it clicks into place.
Make sure that the battery is correctly installed
before switching on the phone.
16
17
Getting Started
Getting Started
Removing the battery
To charge the battery:
1. If necessary, switch off the phone by holding down
the End key until the power-off image displays.
1. With the battery in position on the phone, plug the
connector form the travel adapter into the jack at
the bottom of the phone.
2. Push the battery release latch up and pull the
battery away.
➀
➁
2. Plug the adapter into a standard wall outlet.
Charging the Battery
The travel adapter is provided with your phone to
allow you to charge your phone’s battery from a
standard AC wall outlet. Use only approved batteries
and chargers.
The battery begins charging immediately, and the
service light turns on red while the battery is
charging.
3. When charging is finished, the service light turns on
green. Unplug the adapter from the power outlet
and from the phone.
Note: You need to fully charge the battery before
using your phone for the first time.
You can use your phone while the battery is charging,
but this increases the time it takes to charge the
battery. An “empty” standard battery can be fully
charged in approximately 4 hours.
➀
➁
18
➀
19
Getting Started
Low Battery Indicator
You can easily tell if your battery needs to be
recharged by checking the Battery Status icon (
) at
the upper-right corner of your phone’s display. The
presence of all three bars indicates a full charge, two
bars indicates a smaller charge, and one bar indicates
an even smaller charge.
When the battery charge level becomes low, the
battery sensor blinks an empty Battery Status icon
) and sounds a warning tone. If the battery level
becomes too low, the phone automatically turns off.
When this happens, you lose whatever you are doing
and your phone call cuts off. Watch the Battery Status
icon and make sure that your battery is adequately
charged.
Battery Talk Time and Standby time
Battery times can vary depending on operating
conditions, usage, signal strength and backlight
setting. Talk time usage decreases standby time.
• Talk time: xx hours
• Standby time : xx hours
Getting Started
Switching the Phone On or Off
1. Press and hold the END key until the power-on
image displays to switch the phone on.
The LED indicator on the top right of the phone
turns on red and an alert sounds. When the system
locates services, the greeting message displays
along with the date and time. You can now place
and receive calls.
If the phone is out of service, the No Service icon
( ) appears on the display. In this case, you
cannot make and receive calls. You can try again
later when service is available.
Note: To change the language, use the Language
menu (MENU 9-8). For further details, see
page xx.
2. When you wish to switch the phone off, press and
hold the END key more than two seconds.
WARNING!
Do not switch the phone on when mobile phone use
is prohibited or when it may cause interference or
danger.
Note: As with any other radio-transmitting device,
do not touch the antenna unnecessarily when
the phone is switched on. Contact with the
antenna affects the call quality and may cause
the phone to operate at a higher power level
than otherwise needed.
20
21
Getting Started
Getting Started
Using the Soft Keys
Your Phone’s Modes
Your phone offers a set of functions that allow you to
customize your phone. These functions are arranged in
menus and sub-menus, accessed using the two soft keys
marked
and
. Each menu and sub-menu allows
you to view and alter the settings of a particular
function.
Standby Mode
The roles of the soft keys vary according to the current
context; the label on the bottom line of the display just
above each key indicates its current role.
Example:
Standby is the most basic state of your phone. The
phone goes into Standby Mode after you turn it on or
whenever you briefly press the END key. When your
phone is in Standby Mode, you will typically see the
greeting message and the current date and time. If you
enter a phone number, you can press the SEND key to
dial it or press the Save soft key to save it in the
internal Phonebook.
Press the END key at any time to return to Standby
Mode. Be careful; if you are on a call when you press
the END key, the call disconnects and the phone
returns to Standby Mode.
Position only!!!
Service Provider
06/08/2002 SAT
Menu
Talk Mode
Contacts
You can place and answer calls only when your phone
is turned on. During a call, the phone is in the talk
mode. While you are in the talk mode, pressing the
Option soft key gives you a list of options. See page
xx for details.
Press the left soft
key to access Menu
Mode.
22
Press the right soft
key to find a number
in your Phonebook.
23
Getting Started
Getting Started
Power Save Mode
Silent Mode
Your phone comes with a Power Save feature that is
automatically activated if your phone is unable to find
a signal after 10 minutes of searching. While this
feature is active, the phone’s battery charge is
conserved. The phone automatically rechecks for a
signal periodically. To manually force the phone to
recheck for a signal, press any key.
Silent Mode disables all of the sounds on the phone.
This feature is best used in situations where the phone
might disturb others, such as in a meeting, at a library
or in a theater. You can switch your phone to the silent
mode with one touch of a key.
Lock Mode
To exit and reactivate the previous sound settings,
press and hold the
key again until “Exit Silent
Mode” appears. The Vibration indicator no longer
displays.
When you lock your phone using the Lock Phone
menu (MENU 9-4-1) in the Setup menu, you cannot
use the phone. In the lock mode, you can receive
messages and calls, but you cannot place an outgoing
call until you unlock the phone. To unlock the phone,
you need to enter the lock code.
In Standby Mode, press and hold the
key until
“Entering Silent Mode” and the Vibration indicator
( ) display.
Note: When you turn the phone off, the silent mode is
automatically deactivated.
For details about locking and unlocking your phone,
see page xx.
24
25
Call Functions
Call Functions
Ending a Call
Making a Call
Cannot be checked with
the current phone!!!
In Standby Mode, enter the area code and phone
number and press the SEND key.
Note: When the Auto Retry menu (MENU 9-7) have
been enabled, the phone automatically retries to
make the call when the line is busy or the
remote person does not answer. See page xx.
While entering a number, press the Option soft key to
use the following menu options:
P pause: enters a hard pause.
T pause: enters a 2-second pause.
Correcting the Number
When you want to finish your call, briefly press the
END key or close the folder.
If you end the call by pressing the END key, the call
time, or the length of the call, displays briefly and the
phone returns to Standby Mode.
Emergency Dialing
You can place emergency calls from your emergency
number list even if your phone is locked or all of the
outgoing calls are restricted.
For further details about emergency numbers, see
page xx.
Redialing the Last Number
To clear the
Press the
last digit displayed
CLR key.
whole display
CLR key for more than
one second.
To redial the last call you made, press the SEND key
twice quickly.
Your phone stores the last 10 numbers of the dialed
calls. To recall any of these numbers:
1. In Standby Mode, press the SEND key. The list of
the recent outgoing calls displays.
2. Press the Up or Down key until you find the name or
number you want.
3. Press the SEND key to dial the number displayed.
26
27
Call Functions
Call Functions
Making a Call from Phonebook
Speed Dialing
You can store the phone numbers you called regularly
in the phone’s memory, which is called Phonebook. You
then simply recall the number to dial.
Once you have stored phone numbers in the
Phonebook memory, you can dial them easily
whenever you want.
For further details about the Phonebook feature, see
page xx.
Note: When several numbers are saved in one name
entry, the first number you entered is
automatically specified as a speed dial number.
To change the speed dial number, use Speed
dial of the Phonebook options; see page xx.
Prepend Dialing
The prepend option lets you add digits, such as area
codes and network feature activation codes, to a
phone number that is in your call logs.
One-Touch Dial
To prepend a phone number stored in your phone:
Memory locations 001 through 009 are special onetouch locations. You can dial the phone numbers
stored in the Phonebook memory from 001 through 009
simply by pressing one key.
1. Access outgoing call logs by pressing the SEND key
or Phonebook entries by referring to page xx.
Press and hold the third digit of the memory location
containing the number to be dialled.
2. Scroll to the number you want to dial.
For example: Location no. 009
Press the 9 key and hold.
3. Press the Option soft key to access the options.
4. Press the 3 key to select the Prepend option.
The number (and name) stored displays, and then
dialed.
5. Enter the area code or feature code.
6. Press the SEND key to dial the number.
28
29
Call Functions
Two-Touch Dial
Memory locations 010 through 099 are special twotouch locations.
Press the second digit briefly, then hold down the third
digit of the memory location.
For example: Location no. 023
Press the 2 key briefly and hold down the 3
key.
The number (and name) stored displays, and then
dialed.
Three-Touch Dial
Memory locations 100 through 500 are special threetouch locations.
Press the first two digits briefly, then hold down the
third digit of the memory location.
For example: Location no. 123
Press the 1 key and the 2 key briefly, then
hold down the 3 key.
The number (and name) stored displays, and then
dialed.
Call Functions
Pause Dialing
When you call an automated system, like a banking
service, you are often required to enter a password or
account number. Instead of manually entering the
numbers each time, you can store the numbers in your
Phonebook, separated by special characters which are
called pauses.
There are two kinds of pauses that can be entered on
your phone:
• P pause: A hard pause stops the dialing sequence
until you press the SEND key.
• T pause: A 2-second pause stops the dialing
sequence for two seconds and then automatically
sends the remaining digits.
Note: Multiple two second pauses can be entered to
extend the length of a pause. Keep in mind
that pauses count as digits towards the 32
digit dialing maximum.
Storing Pauses in a Phonebook Entry
To store a number in your Phonebook that contains
pauses:
1. Enter the phone number you want to store, such as
the bank’s teleservice phone number.
2. Press the Option soft key to access the options.
30
31
Call Functions
3. Select the required pause type using the Navigation
keys, and then press the OK key.
4. Enter the digits that need to follow the pause, such
as your account number.
5. Repeat steps 2 through 4 to add more pauses and
numbers, if necessary.
Call Functions
Manual Pause Dialing
You can enter pauses manually during the dialing
process.
1. Enter the phone number of the service you want to
call, such as a bank’s teleservice phone number.
2. Press the Option soft key to access the options.
6. Store the number in your Phonebook as you normally
would by pressing the OK key and following from
step 2 on page xx.
3. Select the required pause type using the Navigation
keys, and then press the OK key.
Pause Dialing from a Stored Phonebook Entry
4. Enter the number to be sent after the pause and
then press the SEND key to dial the first number.
1. Dial the number of the service from Phonebook.
2. If you stored the number using a hard pause(s), wait
for the appropriate prompt from the number you are
calling. When prompted, press the SEND key to
send the DTMF (Dual tone multi-frequency) number
that follows your pause.
5. For a hard pause, press the SEND key again at the
prompt to send the additional number after
connecting.
If you enter the number using a T pause(s), the
phone sends the number that follows the pause two
seconds after the connection.
If you stored the number using a T pause(s), your
phone transmits the number that follows the “T”
pause two seconds after the connection.
3. “SENDING DTMF” flashes on the display and the
transmitted tone sounds.
4. Repeat from step 2, if necessary.
32
33
Call Functions
Call Functions
Voice Dialing
Adjusting the Volume
Before using the voice dialing feature, you must record
names and numbers on your phone using the Voice
Dial menu (MENU 8-1). For further details, see page
xx.
During a call, if you want to adjust the voice volume,
use the Volume keys on the left side of the phone.
Press the key to increase the volume level and the
key to decrease the level.
1. To place a call, press and hold the key or open
the folder, depending on the Set Active menu
(MENU 8-1-4). See page xx.
2. At a voice prompt, say a name into the microphone.
• If the phone recognizes the name, the phone
attempts a connection.
• If the phone does not recognize the name, it
sounds an alert tone and prompts for the name
again.
3. The phone dials the corresponding number.
In Standby Mode, you can also adjust the keypad tone
volume using these keys.
34
35
Call Functions
Call Functions
Answering a Call
Options During a Call
When somebody calls you, the phone rings and
displays the incoming call animation.
Your phone provides you with a number of functions
that you can use during a call.
If the caller can be identified, the caller’s phone
number, or name if available in your Phonebook,
displays.
Press the Option soft key during a call to access the
following options:
1. To answer a call, open the folder and press the
SEND key.
If the Call Answer menu (MENU 9-5) is set to
Any Key, you can answer a call by pressing any key
except for the END key.
Mute/Unmute: allows you to switch your phone’s
microphone off, so that the other person cannot hear
you.
Example: You wish to say something to another person
in the room but do not want the other person to hear
you.
When the menu option is set to Folder Open, you
can simply open the folder to answer the call.
Calls: allows you to access the Calls menu. For
details, see page xx.
For details about the Call Answer menu, see page
xx.
Phone Book: allows you to access the Phone Book
menu. For details, see page xx.
2. To end the call, press the END key or simply close
the folder.
Notes:
• You can answer a call while using Phonebook or
menu functions. The current operation stops.
• If you cannot answer incoming calls, you can set the
phone to answer the call by playing a greeting
message and record callers’ messages. For further
details, see page xx.
Silent/Quit: does not transmit the key tones. It allows
you to press keys without hearing annoying key tones
during a call.
Send Tel #: sends your telephone number to the other
person or automated services.
My Phone #: displays the phone’s own number.
Version: displays the version of the software and
hardware that is being used on the phone.
Voice Privacy: gives you the option of having
enhanced or standard privacy.
36
37
Call Functions
Call Functions
Location: displays whether GPS is set to On or 911
only.
Call Waiting
Send DTMF: allows you to manipulate the audible
keypad tones.
Call Waiting lets you receive a second call during a
conversation. Your phone notifies you of a waiting call
by beeping and displaying “Call Waiting.”
Using Caller ID
Your network provides you with the option of turning
the Call Waiting feature on and off, if you have
subscribed to the service. Call Waiting is on by default
in the phone. If you choose to have a undisturbed
conversation, simply turn off the feature for the current
call.
This feature tells you who is calling you by displaying
the caller’s number when the phone rings. If the name
and number are stored in your Phonebook, the
corresponding name is also displayed. If you call
someone who has this feature, your phone number
displays on her/his phone.
Note: Contact your service provider to set up the
Caller Line Identification service.
Viewing Missed Calls
If you fail to answer a call for any reason, the phone
indicates the missed call by displaying a text
notification on the screen. Additionally, if caller
information is available, a Missed entry is created.
Press the SEND key to access the recent calls list, or
the END key to clear the message and return to
Standby Mode.
Note: Contact your service provider to activate the
Call Waiting service.
To answer a waiting call during a call:
1. When you hear a beep telling that you have a
waiting call, press the SEND key. The phone
connects the calling person and places the current
call on hold.
2. Press the SEND key again to switch between the
two calls.
Note: If you do not respond to a Call Waiting
notification, the phone will forward the call to
voice mail server or another number that you
have set up. Contact your service provider for
more information.
To view missed calls, access the Missed menu
(MENU 1-3). For details, see page xx.
38
39
Call Functions
Entering Text
Three-Way Calling
This feature enables you to conduct conference calls
with two separate people at the same time. The phone
records each participant into the Outgoing Calls Log.
Also, You are billed call time for each outgoing call
separately.
Note: Contact your service provider to activate ThreeWay Calling.
To place a Three-Way call:
1. During a conversation, press the SEND key. The
phone places the other person on hold.
2. Enter the phone number for the third person, and
then press the SEND key. The phone dials the third
person.
3. When you are connected to the person, press the
SEND key again to begin your three-way call.
If one of the callers (not you) hangs up, you and
remaining caller stay connected. If you initiated the
call and you hang up first, all three participants are
disconnected.
At many times when using your phone, you will need
to enter text, such as when storing a name in
Phonebook, creating your personal greeting or
scheduling events on your calendar. You can enter
alphanumeric characters into your phone using your
phone’s keypad.
Your phone has the following text input modes:
• T9(English): This mode allows you to enter words
with only one key press per letter. Each key on a
keypad has more than one letter - a single press on
the 5 key could be J, K or L. The T9 mode
automatically compares your key presses to an
internal linguistic database to determine the correct
word. The T9 mode requires far fewer keystrokes
than the traditional multi-tap method, Alphabet
mode.
• Alphabet: This mode allows you to enter letters by
pressing the key labeled with the letter you want to
enter once, twice, or three times until it appears on
the display.
• Symbol: This mode allows you to enter special
characters.
• Number: This mode allows you to enter numbers.
Note: The T9 mode supplies an appropriate language
database as your language setting menu
(MENU 9-8).
40
41
Entering Text
Entering Text
Changing the Text Input Mode
Using the T9 (English) Mode
When you are in a field that allows characters entry,
you should notice the text input mode indicator on the
display.
To type a word, press keys corresponding to the letters
you need. Remember the following as you are typing:
Example: Entering a name for a Phonebook entry
1. Press alphanumeric keys on the keypad just once
per letter. For example, to enter “Hello,” press the 4,
3, 5, 5 and 6 keys.
The word you are typing appears on the display. It
may change with each key press.
2. Type to the end of the word before editing or
deleting any keystrokes.
Position only
Text input mode
indicator
3. Put a space between words by pressing the
If the word that appears on the display is not the
one that you desire, press the 0 key one or more
times to display alternative word choices for the
keys you have typed. For example, both “of” and
“me” use the 6 and 3 keys. The phone displays the
most commonly used choice first.
To change to another text input mode:
1. Press the Option soft key.
Position
only
MENU
key.
4. Continue entering the next word.
Smart Punctuation
2. Scroll to the mode by pressing the Navigation keys.
3. To select the highlighted mode, press the OK key. If
you want to exit the menu without changing to a
new mode, press the CLR key.
The selected text input mode indicator appears on
the display.
42
Periods, hyphens, and apostrophes are available by
pressing the 1 key. The T9 mode applies rules of
grammar to insert the correct punctuation. Notice that
the 1 key is used twice in this example to display two
punctuation marks:
‘
43
Entering Text
Including a Number
You can include a number between letters without
exiting the T9 input mode. Press and hold the
corresponding number key.
Changing the Case
Your phone has three cases:
• T9Word: the initial letter is capitalized.
• T9WORD: all letters are capitalized.
• T9word: all letters are lower case.
Press the key one or more times to display the
appropriate case indicator and begin typing normally.
Other Usages
• Press the
key to insert a space.
• To move the cursor to the left or right through your
text, press the Left or Right key.
• Press the CLR key one or more times to delete the
letters one by one to the left. Press and hold the
CLR key to clear the display.
Entering Text
Using the Alphabet Mode
When typing in the Alphabet mode, you need to press
the keys labeled with the required letter:
- Once for the first letter
- Twice for the second letter
- And so on
This method is called multi-tap typing.
For example, you press the 2 key three times to display
the letter “C” and the 5 key two times to display the
letter “K.”
The cursor moves to the right when you press a
different key. When entering the same letter twice or a
different letter on the same key, just wait for a few
seconds for the cursor to move to the right
automatically, and then enter the next letter.
Refer to the table below for the list of characters
assigned on each key.
Key
Characters in the Order Displayed
. , A
M N
W X
? ! ’
The characters list
displayed in the Send To
and Message screen is
different.
(Caps Lock mode)
44
45
Entering Text
Entering Text
Including a Number
Using the Symbol Mode
You can quickly include a number between letters.
Press and hold the corresponding number key.
The symbol mode enables you to enter symbols.
Changing the Case
Your phone has three cases:
• Abc: the initial letter is capitalized.
• ABC: all letters are capitalized.
• abc: all letters are lower case.
Position
only
MENU
Press the key one or more times to display the
appropriate case indicator, and begin typing normally.
You can display more symbols by pressing the Left or
Right key.
Other Usages
Press the number key corresponding to the symbol you
want to enter. The phone automatically switches back
to the text entry mode used just prior to selecting the
symbol mode.
• Press the
key to insert a space.
• To move the cursor to the left or right through your
text, press the Left or Right key.
• Press the CLR key one or more times to delete the
letters one by one to the left. Press and hold the
CLR key to clear the display.
Using the Number Mode
The number mode enables you to enter numbers.
Press the keys corresponding to the digits you want to
enter and manually switch back to the text entry mode
of choice. For details about changing the mode, see
page xx.
46
47
Using the Menus
Using the Menus
Your phone offers a range of functions that allow you
to tailor it to your needs. These functions are arranged
in menus and submenus.
Notes:
• You can return to the previous menu level by
pressing the Back key.
• You can exit the menu without changing the menu
settings by pressing the END key.
The menus and submenus can be accessed by scrolling
or by using the shortcuts.
Accessing a Menu Function by Scrolling
Accessing a Menu Function by Using Its
Shortcut
1. In Standby Mode, press the Menu soft key to
access Menu Mode.
Menu, submenus and setting options are numbered
and can be quickly accessed by using their shortcut
numbers.
2. Scroll with the Navigation keys to reach the main
menu; for example, Setup. Press the OK key to
enter the menu.
Note: The numbers assigned to each menu function
are indicated on the list on page xx.
3. If the menu contains any submenus; for example,
Language, find the one you want by scrolling with
the Up or Down key. Press the OK key to enter the
submenu.
If the menu you have selected contains submenus,
repeat this step.
4. Scroll with the Up or Down key to find the setting of
your choice.
5. Press the OK key to confirm the chosen setting.
1. In Standby Mode, press the Menu soft key to
access Menu Mode.
2. Enter the first digit of the shortcut number. Repeat
this for each digit of the shortcut number.
Example: Accessing the Language menu
Press the 9 and 8 keys.
9 selects Setup and 8 selects Language.
3. Find the setting of your choice by pressing the Up or
Down key.
4. Press the OK key to confirm the chosen setting.
48
49
Using the Menus
Using the Menus
List of Menu Functions
Main menu
Main menu 1
1. Calls
1. Outgoing
2. Incoming
3. Missed
4. Erase Logs
5. Call Timer
2. Phone Book
3. Message
1. Outgoing
2. Incoming
3. Missed
4. All Calls
1. Last Call
2. Total
3. LifeTime
4. Erase Total
1. Send New Msg
2. Voice
3. Inbox
4. Outbox
5. Draft Msg
6. Saved Msg
7. Web Alert
8. Msg Setting
Main menu 1
4. Mobile Web
1. Get In Web
2. Prompt
5. Planner
1. Today
2. Scheduler
3. Jump To Date
4. To Do List
5. Memo Pad
6. Count Down
7. Alarm Clock
8. World Time
9. Calculator
6. Display
1. Animation
Main menu 2
1. Find
2. Add
3. Rename Group
4. My Phone#
5. Memory
9. Erase Msg
50
Main menu
Main menu 2
1. Opening
2. Closing
3. Wallpaper
2. Banner
3. Backlight
4. Contrast
5. Auto Hyphen
7. Sounds
1. Volume/Vibrate
2. Ringer Type
1. New Message
2. Msg. Alert
3. Scroll Timer
4. Auto Delete
5. Canned Msg.
6. Voice Mail #
1. Voice
2. OldInbox
3. NewInbox
4. Outbox
5. Draft Msg
6. Saved Msg
7. All Messages
3. Key Beep
4. Alerts
1. Calls
2. Alarm
1. Calls
2. Alarm
3. Data/Fax In
4. Planner
1.Volume
2. Tone Length
1. Minute Beep
2. Service
3. Connect
4. Disconnect
5. Fade
6. Roam
7. Privacy
5. Power On/Off
6. Roam Ringer
7. Whisper Mode
51
Using the Menus
Calls
Main
Main menu 1
Main menu 2
8. Voice Kit
1. Voice Dial
1. Record
2. Review
3. Erase All
4. Set Active
1. Record
2. Review
3. Erase All
1. On/Off
2. Inbox
3. Greeting
4. Call sound
5. Wait Time
2. Voice Memo
3. Call Screen
9. Setup
1. Location
2. Network
3. Data/Fax
4. Security
5. Call Answer
6. Auto Answer
7. Auto Retry
8. Language
9. Clock Set
0: Version
52
1. Set NAM
2. Roam Option
1. Auto Detect
2. Baud Rate
1. Lock Phone
2. Change Lock
3. Emergency #
4. Voice Privacy
5. Restriction
6. Erase Memory
7. Reset Phone
Cannot be checked with
the current phone!!!
You can use the Calls menu to:
• view and dial the last calls you dialed, received or
missed.
• erase the numbers in the call log memory.
• view the length of calls.
Outgoing
The phone stores up to 20 of the last calls you dialed.
When you access this menu, a list of the outgoing
calls displays.
1. Press the Navigation keys to find a number, or
name if it is saved in Phonebook.
2. Press the OK key to confirm the highlighted
number. The dialed number, or name if it is saved in
Phonebook, displays along with the date and time
when the call was made.
3. To
1. Main Clock
2. Dual Clock
MENU 1-1
Press the
place a call to
the selected number
SEND key.
use the options
Option soft key.
For details, see the next
page.
exit the call log
END key.
53
Calls
Calls
When you press the Option key on the call log screen,
the following options are available:
Missed
Talk: dials the number.
If Caller Line Identification service is available, your
phone keeps a list of the last 20 incoming calls that
you failed to answer. Contact your service provider for
further details about the service.
Save: allows you to save the number in Phonebook.
Prepend: allows to add an area code or feature code
to the number before dialing the number. See page xx
for details.
Erase: erases the number.
MENU 1-3
When you access this menu, a list of the missed calls
displays.
For more information about scrolling through the list
and accessing the call log, see “Outgoing” on page xx.
Incoming
MENU 1-2
This menu lets you view up to 20 of the last calls you
received if you are subscribed to the Caller Line
Identification service. Contact your service provider for
further details about this service.
When you access this menu, a list of the incoming
calls displays.
For more information about scrolling through the list
and accessing the call log, see “Outgoing” on page xx.
54
Erase Logs
MENU 1-4
You can erase the entries stored in each of the three
call logs or all three logs at once.
When a confirming message displays, select Yes to
erase the selected log or all of the logs. If you want to
cancel the selection, select No. Press the OK key to
confirm the selection.
55
Calls
Phone Book
Call Timer
MENU 1-5
Your phone records the amount of air time, or talk
time, used. Using this menu, you can view the number
of the calls to or from your phone, and the air time for
all of the calls. You can easily erase the call time
record at any time. This menu is convenient for
estimating your usage.
Phonebook allows you to store frequently used phone
numbers and the associated names in your personal
directory to make it easy for you to make a call
without having to remember or enter the phone
number. You can store up to 500 entries including
E-mail and URL addresses.
Note: You cannot store numbers in locations 0, 311 or
411 of your Phone Book.
Note: This feature is not intended to be used for billing
purposes.
The following options are available:
Last Call: shows the time of the last call.
Total: shows the number of all calls made to or from
your phone and the total duration of the calls since the
time counter was last set to zero by using the Erase
Total option.
LifeTime: shows the number and total duration of all
calls made to or from your phone since the phone was
shipped from the factory.
Erase Total: erases the “Total” time measurement
and resets the air time counter.
Find
MENU 2-1
This menu allows you to find an entry in your
Phonebook.
You can quickly access this menu by pressing the
Contacts soft key in Standby Mode.
1. Press the Left or Right key to scroll to the method
you want to use.
• By Name: Enter the first few letters of the name
you want with the Alphabet mode. The Phonebook
entries are listed starting with the first entry
matching your input.
• By Entry: Enter the location number of the
number your want to find, using the numeric keys.
• By Group: Press the Down key and select the
group containing the entry you want to find, using
the Left or Right key. The phone lists all of the
entries in the selected group.
56
57
Phone Book
Phone Book
2. If necessary, press the Up or Down key to scroll
through the entries.
Add
3. When the entry you want highlights, press the OK
key to access the entry. The phone shows the
details about the name.
This menu allows you to store a number with a name
in your Phonebook. You can save a person’s numbers,
such as workplace number, mobile number and fax
number, into one entry. A Phonebook entry can contain
up to six numbers, one in each category.
4. To
Press the
place a call to
the selected number
SEND key.
use the options
Option soft key. For
details about the
options, see below.
When you press the Option soft key on the details
screen, the following options are available:
Talk: places a call to the number.
Edit: allows you to change the phone number, name,
location number, label category and so on.
Erase: erases the selected entry.
MENU 2-2
Creating a New Entry
1. When the display screen prompts you to confirm
Number or E-mail, select one of them by using the
Navigation keys, and then press the OK key.
2. Enter a phone number or e-mail address and press
the OK key.
3. Select New Entry by pressing the Navigation keys
and press the OK key to confirm to add a new entry.
4. Select the label to assign to the phone number by
pressing the Navigation keys, and then press the OK
key.
5. Highlight the desired option you want to customize
by using the Up or Down key, and set each option as
needed by using the Left or Right key and the
number keypad. The following options are available.
• No Name: enter the desired name. You can enter
up to 22 characters. For further information about
entering characters, see page xx.
• Location: the first available location displays. If
necessary, enter the location number using the
number keypad.
58
59
Phone Book
• Home/Office/Mobile/Pager/Fax/Fax:
enter the desired numbers, if necessary.
• Alias: ????????????????? Data required!!!
• E-mail: enter the person’s e-mail address. You
can enter up to 48 characters.
• SpeedDial: select the priority number to be
speed-dialed by the location number.
• Group: select the desired caller group. You have
5 choices of the group. Select No Name if you
don’t want to set the group.
• Inactive: select the unique ringer type for the
entry. By selecting a different ringer, incoming
voice calls having a caller ID can be distinguished
from those that do not.
• Picture ID: select the image you want to assign
to the phone number. If you don’t want to use the
image, select Image off.
Phone Book
Adding a Number into an Existing Entry
1. Enter a number and press the OK key.
2. Select Find by using the Navigation keys, and then
press the OK key.
3. Scroll to the entry where you want to add a number
by pressing the Up or Down key. Press the OK key.
4. To complete storing the number, follow the
procedure from step 3 in “Creating a New Entry” on
page xx.
Rename Group
MENU 2-3
This menu allows you to change the settings for the
caller groups.
6. Press the OK key to save the entry.
1. Scroll to the group you want to edit using the Up or
Down key and press the OK key.
Storing Phone Numbers at Call’s End
2. Clear the current name using the CLR key.
To store a phone number at the end of your call:
1. Press the END key to end the call. The call time and
the phone number display.
2. To store the phone number, press the OK key.
3. Enter a name and press the OK key.
For further details about how to enter text, see page
xx.
4. Repeat steps 1 through 3, if necessary.
3. To complete storing the number, follow the
procedure from step 2 in “Creating a New Entry” on
page xx.
60
61
Phone Book
Messages
My Phone Number
MENU 2-4
This menu shows you your phone number.
After viewing, press the OK key to return to the
previous screen.
Memory
MENU 2-5
This menu shows you how many Phonebook and Voice
Dial locations are used or empty.
After viewing, press the OK key to return to the
previous screen.
Cannot be checked with
the current phone!!!
Your phone can receive voice mail notification, text or
multimedia messages and pages. It also can send
messages and pages if you system supplier provides
this service.
Your phone can store up to 130 messages total in the
Inbox, the Outbox, the Draft and the Saved Message
box. When the memory is full, a warning message
displays and the phone rejects additional messages
until you erase the obsolete ones.
When the phone receives a message, an alert sounds,
a text notification displays along with the name and
phone number of the caller if available. The New
Message icon ( ) remains on the screen until you
read the new text messages or numeric pages, or you
listen to the new voice mail messages.
Messages are received even when your phone is in the
lock mode. However, the screen does not display
information about the message. To access a message,
you must unlock the phone. During a conversation and
you receive an incoming message, your phone
automatically mutes the ringer. This is to avoid ringing
in your ear while you are trying to converse.
You can quickly enter the Messages menu by
pressing the Down key in Standby Mode.
62
63
Messages
Messages
Message options cannot be
checked with the current phone!!!
Send New Message
MENU 3-1
You can create a short text message and send it to
other mobile phones.
Note: Message transmission is available only when
your phone is operating in a digital network and
if service is supported by your service provider.
1. Enter a destination number or an e-mail address
using the numeric keys and press the OK key.
Pressing Option soft key allows you to change the
input mode or enter .edu, .net or .com.
2. Enter the message contents. For further details
about how to enter text, see page xx.
When you press the Option key, you can change
the input mode and use the following options:
• Text Format: allows you to format the style of
the text. For the Size attribute, the Small,
Medium and Large sizes are available. For the
Align attribute, you can select Right, Left,
Center or Default. For the Bold, Italic,
Underscore and Strikethrough attributes,
select them by pressing the Check soft key.
The attributes can be combined.
• Add Media: allows you to add the required
animation, picture or melody to the message.
Select the category of the object to be added. .In
each category, you can select the various factoryset items or choose an item received from other
sources, such as the Internet or other phones.
64
• Canned Msg: allows you to use the ten canned
messages preset in the Msg. Alert menu; for
details, see page xx.
3. When you finish entering the message, press the OK
key.
4. To select an option, press the Navigation keys, and
then press the OK key.
The following options are displayed:
• Edit Send To: allows you to change the send-to
phone number.
• Edit Text: allows you to change the message
contents you’ve already entered.
• Send Options: displays the following setting
options. Scroll to an options using the Up or Down
key and change the setting using the Left or Right
key.
- Priority: selects the message priority.
- Validity: selects how long your message is valid at
the SMS center while attempts are made to
deliver them to the recipient.
- Privacy: gives you the option of having enhanced or
standard privacy.
- Delivery Ack: turns the delivery acknowledgement
feature on or off. When this is activated, the
network informs you whether or not your message
has been read by the recipient.
- Insert Sign.: allows you to attach your name to
your message.
65
Messages
Messages
- Call Back #: allows you to attach your phone
number to the message.
Voice
- Def. Delivery: selects how long the delivery of
the message will be delayed at the SMS center,
if you do not want to sent it immediately.
When the voice mail list displays, press the Up or
Down key to scroll to a voice message and press the
OK key to listen to the message.
• Save in Draft: allows you to save the draft
message as a draft.
• Save Text: sets whether or not the phone saves
the message in the Outbox after transmission.
Note: Some options can be preset in the New
Message menu option (MENU 3-8-1); for
details, see page xx.
5. Repeat step 4 to set the message options.
6. After changing the setting options, press the SEND
key to send the message.
7. When you set the Save Text option or Save In
Outbox option (see page xx) to Prompt, the phone
asks if you want to save the message. Select Yes or
No and press the OK key.
MENU 3-2
If multiple new voice messages are received but not
checked, information of the last one will be displayed.
The information display includes the time/date stamp,
the number of new voice messages and the callback
number.
Press the Option soft key to access the following
options:
Listen: allows you to listen to the voice message. The
phone automatically dials the number of your voice
mail center.
Clear Icon: clears the New Message icon and resets
the counter for a new voice message, if necessary. The
system resets the counter automatically after you
listen to all of the new messages.
Note: Closing the folder or press the END key before
the message is sent stops the transmission.
66
67
Messages
Inbox
Messages
MENU 3-3
Outbox
MENU 3-4
Your phone can store up to 50 messages in the Inbox.
When you access the Inbox menu, the message list
appears.
Your phone can store up to 50 messages in the Inbox.
When you access the Outbox menu, the message list
appears.
To view details of a message, press the Up or Down
key to scroll to the message on the list and press the
OK key. If necessary, press the Left or Right key to
scan through the contents.
To view details of a message, press the Up or Down
key to scroll to the message on the list and press the
OK key. If necessary, press the Left or Right key to
scan through the contents.
While viewing a message, press the Option soft key
to use the following options:
While reviewing a message, press the Option soft key
to use the following options:
Forward: allows you to forward the message to
another person.
Re-send: allows you to resend the message. For
further details, see page xx.
Delete: deletes the message from the Inbox.
Save Msg: allows you to save the message in ?????
Save Text: allows you to save the message in the ???
Cancel: cancels sending the message if it is sending.
??????
Save addr: allows you to save the callback number of
the message.
Delete: deletes the message from the Outbox.
To Saved Msg.: ???????????????
68
69
Messages
Draft Message
Messages
MENU 3-5
Your phone can store draft messages that are yet to be
sent in the Draft Message box. If you save the
message contents using the Draft Msg menu before
sending it (see page xx), you can access them using
this menu.
Web Alert
MENU 3-7
When you receive a new Web message from the web
server, your phone alerts you and the following options
display:
View: allows you to access the Web Inbox to display
the web message.
To review a draft message, press the Up or Down key
to scroll to it and press the OK key.
Clear: Select this option if you do not wish to read the
message at this time. You can press the CLR key.
While reviewing a message, press the Option soft key
to use the following options:
To select an option, scroll to it and press the OK key. If
you select Clear, the message is stored in the Web
Alert menu.
Edit: allows you to edit the message.
Delete: deletes the message from the Draft Message
box.
Saved Message
MENU 3-6
When you save a message before sending it, or select
the Save Msg option in the Inbox or Outbox, the
message is saved in this message box.
When you access the Web Alert menu (MENU 3-7), a
list of the received web message displays. Press the
Up or Down key to scroll to the message you want to
view and press the OK key. The phone starts the web
browser and displays the message contents. If
necessary, press the Up or Down key to scan through
the contents.
To review a stored message, press the Up or Down key
to scroll to it and press the OK key.
While reviewing a message, press the Option soft key
to use the following options:
Edit: allows you to edit the message.
Delete: deletes the message from the Saved Message
box.
70
71
Messages
Message Setting
Messages
MENU 3-8
In this menu, you can preset several options for using
the messaging feature.
New Message (MENU 3-8-1)
You can set up the default settings of the options for
creating a new message. The following options are
available:
Save In Outbox: allows you to set whether or not you
want the transmitted message to be saved in the
Outbox.
- Not Save: The phone does not save the message.
- Prompt: The phone asks you whether or not you want
to save the message.
- Auto Save: The phone automatically saves the
message.
Callback #: allows you to set the call back number. It
is preset to your phone number at the factory.
Entry Mode: allows you to select the text input mode
between T9 Word (T9 English) and Alphabet.
Delivery Ack: allows you to activate or deactivate
the delivery acknowledgement.
My Signature: allows you to attach your name to the
message.
72
Message Alert (MENU 3-8-2)
This menu allows you to set alert settings for an
incoming messages.
Volume/Vibrate: allows you to adjust the alert
volume level or select the alert type.
Type: allows you to select ringer type from Voice
Mail, Page, Text and Web Alert.
Reminder: allows you to set how many times the
phone alerts you to an incoming message. Once,
Every 2 min options are available. Select Off if you do
not want to be alerted.
Scroll Timer (MENU 3-8-3)
If an incoming message is too long for the display, the
phone displays it by scrolling the screen automatically.
You can set how often the phone scrolls the message
to the next screen.
If you select Off, you need to scroll to the next screen
manually using the Up and Down keys.
Auto Delete (MENU 3-8-4)
This option allows you to delete your message
automatically after viewing it.
To set the phone to warn you before your message is
deleted, select Warning Msg.
73
Messages
Wireless Web
Canned Messages (MENU 3-8-5)
Cannot be checked with
the current phone!!!
This menu allows you to change the ten canned
messages.
About the Web Browser
1. Scroll to a message on the list by using the
Navigation keys, and then press the OK key.
Your phone comes equipped with a web browser
which makes it possible for you to access the wireless
web.
2. Change the message as needed. For further details
about entering characters, see page xx.
3. When you are finished, press the OK key.
Voice Mail Number (MENU 3-8-6)
All unanswered calls to your phone are automatically
transferred to the voicemail center, even if your phone
is off or in use. You can store the number of the voice
mail center in this menu.
You can include a hard or 2-second pause in the
number by pressing the Option soft key.
The web browser allows you to access up-to-the
minute information through your phone. Browsing the
wireless web through your phone is unlike using your
computer; site providers have selected only the critical
aspects of their sites to present to wireless phone
users and they have removed most of the graphics.
Each time you start the web browser, the phone will
connect to the wireless web and the Service icon ( )
will appear on the display. Any time this icon is visible
on the display, you are connected to the wireless web
and will be billed accordingly. Rates will vary
according to your service plan.
The web browser will end the connection after a
certain period of network inactivity and will
automatically reconnect as necessary. For this reason,
you may find that you are billed for several network
connections within a single session. This is normal and
is designed to minimize your bill.
74
75
Wireless Web
Get In Web
Wireless Web
MENU 4-1
Note: The first time you use the web browser, you will
go through a security setup process that takes 3
to 5 minutes. Please follow the on-screen
prompts to complete the security setup process.
This initial setup process occurs only the first
time you access the service.
1. Accessing the Get In Web menu (MENU 4-1)
connects your phone to the wireless web. You can
also press the key in Standby Mode.
2. If a reminder appears depending on your setting in
the Prompt menu (MENU 4-2), simply answer Yes
or No by pressing the Left or Right key.
3. Once you are connected, the home page or the last
page you visited displays.
The opening page contents may be different
according to your wireless web service provider.
4. To scroll through the screen, use the Up or Down
key.
Exiting the Web Browser
To exit the web browser, simply press the END key at
any time.
If the To End or Both option is set in the Prompt
menu (MENU 4-2), you will be prompted whether you
want to end the browser call. Simply answer Yes or
No by pressing the Left or Right key.
76
Navigating the Web Browser
When you use the web browser, some keys on your
phone operate differently than when on a normal phone
call.
Here’s how the keys work in the Web Browser:
Navigation key: Use these keys to scroll to
and select browser options. The currently
selected option is indicated by an arrow. You
can also use them to move the cursor when
entering text.
Clear key: This key performs two functions:
• Sends you back in the browser. Pressing it
once sends you back one page. Pressing and
holding this key sends you back to the home
page.
• Clears out the entered text or numbers.
When entering characters, press this key to
clear the last number, letter or symbol. Press
and hold this key to completely clear the
input field.
Asterisk/Shift key: Press this key before
entering text to create upper case characters.
You can also use this key to move back one
space on the display screen.
0/Next key: Press this key to enter 0, or to
move to the next word when in T9 predictive
word entry mode.
77
Wireless Web
Pound/Space key: Press this key to insert
a space when entering text.
Numbers keys 1~9: If items on a menu are
numbered, these keys can be entered to
select them.
END key: Press this key to exit the Wap
Browser and return to Standby Mode.
Menu Key: This is the left soft key. This key
is also used for accessing the browser menu,
secondary options or a menu of secondary
options.
OK/Select Key: This is the right soft key.
This key is also used for selecting the
highlighted item.
SEND key: Press this key to send a call.
Wireless Web
Using the Web Browser Menus
On the web browser, you can access the following
options by pressing the Option soft key:
Reload: reloads the current web page.
Home: takes you back at any time to the homepage of
the wireless web service provider.
Bookmarks: allows you to directly load a bookmarked
web page.
Mark Site: allows you to set a bookmark for most
pages; they can be accessed directly from any web
page. Bookmarks save you time by reducing the
number of steps required to access a given page.
About Openwave: provides you with information
about Openwave and your version of the web browser.
Advanced: gives you access the following advanced
features:
- Show URL: displays the URL address of the site
where you are currently connected. It also enables
you to declare the current site as the startup
homepage.
- Homepage: allows you to change the startup
homepage manually.
- Set WAP Proxy: allows you to configure the proxy
settings required for connecting to the wireless web.
78
79
Wireless Web
Wireless Web
- Offline Service: Most applications are stored on a
server that cannot be accessed outside your wireless
coverage area. However, some applications can be
stored in the cache of your phone, enabling you to
use them offline. You can remove the associated site
from the cache at any time.
Prompt
- Outbox: stores outgoing requests from the browser
so that they can be processed at a later date.
The following options are available:
- Restart Browser: restarts the browser without exiting
it.
- Encryption: This option is automatically set by the
service provider. You do not need to change it.
Entering Text in the Web Browser
When prompted, you can enter letters, numbers or
symbols same way as in the phone mode. See page xx
for further details about how to enter characters.
80
MENU 4-2
Your phone can give you a prompt to confirm your
browser session. You can set the phone to display the
prompt or not to display.
None: You do not receive a prompt.
To Start: This is the default setting. You will see the
prompt when you enter the browser, but not when you
exit it.
To End: You will see the prompt only when you exit
the browser.
Both: You will be prompted when you enter or exit the
browser.
81
Wireless Web
Get it Now
Wireless Web
To change the browser settings:
1. In Standby mode, press the Right key.
When you press the Right key in Standby mode, you
can access the Get it Now menu which allows you to
purchase and download various multimedia files from
the wireless web.
To download a multimedia files:
1. In Standby mode, press the Right key.
The menu icons appear on the display.
2. Press the Right key when the MobileShop icon is
selected.
The following options are available:
• Catalog: allows you to browse and purchase
applications
• Search: allows you to search for an application
by entering a keyword.
• MobileShop Help: provides you with the help
information about using the MobileShop menu.
2. Press the Right key to select the Settings icon and
press the OK key.
3. Select an setting option using the Up or Down key
and press the OK key.
The following options are available:
• Order Apps: allows you to change the order of
the downloaded applications.
• Move Apps: allows you to move an application
to the other folder.
• Manage Apps: allows you to move an
application to the other folder.
• Main Menu View: allows you to change the
view mode of the main menu screen.
• Screen Savers: allows you to activate the
Screen Saver application, if downloaded.
• View Log: shows the records of your browsing.
4. When you are finished, press the CLR or END key.
3. Press the Right key when the Catalog option is
selected. You are accessed to the associated web
site given by your service provider and browse the
available applications.
To view help information:
4. Select the application you want to download and
follow the instructions on the screen.
2. Press the Right key to select the Help icon and
press the OK key.
1. In Standby mode, press the Right key.
3. Select a help item using the Up or Down key and
press the OK key.
82
83
Wireless Web
Planner
4. Press the Up or Down key to scroll through the
information.
5. To go back to the main help screen, press the OK or
CLR key.
The Planner feature enables you to:
• keep track of important dates and events.
• create a list of things to do and memos.
• set an alarm to ring at a specific time.
• use the phone as a calculator.
• check the time in another part of the world.
• count down to a specific day.
• set the current date and time.
Today
MENU 5-1
You can schedule up to 9 events for the current day,
indicating each event’s start and end time. You can
even have your phone's calendar alert you before an
event commences. Events scheduled for future dates
automatically appear on your Today events schedule
on that day.
Scheduling a New Event
1. Enter your event contents and press the OK key.
For further details about entering characters, see
page xx.
2. Enter the start time and date using the numeric
keys.
You need to enter the time in 12-hour format. Press
the 2 key for A (AM) or the 7 key for P (PM).
Note: You can move through the input fields using
the Navigation keys.
84
85
Planner
3. Enter the end time and date using the number keys.
4. Select when an alarm will inform you of the event,
by pressing the Left or Right key. Selecting No
alarm means that the phone does not ring the
alarm.
Planner
Scheduler
MENU 5-2
5. Press the OK key to store your event.
This menu allows you to view the current month, as
well as a past or future months, in calendar format. On
the calendar, the current day is boldfaced and days
with scheduled events are indicated by a colored box
inside the calendar day.
Viewing Your Today’s Schedule
Scrolling Through the Calendar
The list of the events stored on the current day
displays when you select the Today menu (MENU 51).
• You can move by one day by pressing the Left or
Right key.
While viewing the event list, press the Up or Down
key to scroll to an event and:
• Press the OK key to view the event information. To
view the Start time and End time settings, use the
Up and Down keys. You can move to the previous or
next event by pressing the Left or Right key.
• Press the Option soft key to use the following
options:
• You can move by one week by pressing the Up or
Down key.
• To display the next or previous month, press the
or key.
On the calendar, press the Option soft key to use the
following options:
View: allows you to view the scheduled events of the
day.
Add New: allows you to add a new event on the day.
Add New: allows you to add a new event.
Edit: allows you to change the event.
Erase: allows you to erase the selected event.
Erase All: allows you to erase all of the events.
86
87
Planner
Planner
Cannot be checked with
the current phone!!!
Creating a New Schedule
Viewing Your Schedule
You can store up to 70 events total in the scheduler,
with up to 9 events for one day.
Select a day with scheduled events on the calendar,
referring to “Scrolling Through the Calendar” on page
xx and press the OK key. The first event stored on the
day displays.
1. Select a day on the calendar, referring to “Scrolling
Through the Calendar” on page xx and press the OK
key.
2. Enter your event contents and press the OK key.
For further details about entering letters, see page
xx.
3. Enter the start time and date using the numeric
keys.
You need to enter the time in 12-hour format. Press
the 2 key for A (AM) or the 7 key for P (PM).
Note: You can move through the input fields using
the Navigation keys.
4. Enter the end time and date using the number keys.
5. Select when an alarm will inform you of the event,
by pressing the Left or Right key.
Selecting No alarm means that the phone does not
ring the alarm.
6. Press the OK key to store your event.
88
Press the Left or Right key to view the previous and
next event. To view the start time and end time sets,
use the Up and Down keys.
While viewing the event, press the Option soft key to
use the following options:
Edit: allows you to edit the event.
Erase: allows you to erase the event.
Jump To Date
MENU 5-3
This feature allows you to specify the calendar date
you want to view. You can enter, edit, and /or erase
events in your calendar.
To use jump to date, enter the date you want and
press the OK key.
For further details about creating and viewing your
schedule, see page xx.
89
Planner
To Do List
Planner
MENU 5-4
This feature allows you to enter up a list of tasks to be
done and assign both a priority and a deadline to each
task.
Viewing a To Do List
The list of the tasks displays when you access the To
Do List menu (MENU 5-4). Press the Left or Right key
to move to the previous or next to do list.
Creating a To Do List
While viewing the task, press the Option soft key to
use the following options:
1. Enter the first task and press the OK key to confirm.
Add New: allows you to add a new task.
For further details about how to enter characters,
see page xx.
2. Select the priority either High or Low using the Left
or Right key and then press the Down key to set the
time.
3. Enter the time and date by which the task needs to
be done, by using the numeric keys, and then press
the OK key to save the task.
You need to enter the time in 12-hour format. Press
the 2 key for A (AM) or the 7 key for P (PM).
Note: You can move through the input fields using
the Navigation keys.
Edit: allows you to edit the task.
Erase: allows you to erase the selected task.
Erase All: allows you to erase all of the tasks.
Memo Pad
MENU 5-5
This feature allows you to write down memos about
anything you need to remember.
Writing a New Memo
1. Enter the memo contents.
For further details about how to enter characters,
see page xx.
2. Press the OK key to save the memo.
90
91
Planner
Planner
Viewing a Memo
2. Enter the time and date you want to count down
from.
The list of your memos displays when you access the
Memo Pad menu (MENU 5-5).
While viewing the memo list, press the Navigation
keys to scroll to a memo and:
• Press the OK key to view details. You can move to
the previous or next memo by pressing the
Navigation keys.
• Press the Option soft key to use the following
options:
Add New: allows you to add a new memo.
Edit: allows you to edit the selected memo.
Erase: allows you to erase the selected memo.
Erase All: allows you to erase all of the memos.
Count Down
MENU 5-6
You need to enter the time in 12-hour format. Press
the 2 key for A (AM) or the 7 key for P (PM).
Notes:
• You can move through the input fields using the
Left or Right key.
• You can enter a year between 1981 and 2099.
3. Press the OK key to store the counter.
Viewing a Counter
The list of the counters displays when you access the
Count Down menu (MENU 5-6).
While viewing the counter contents, press the Left or
Right key to move to previous or next counter:
While viewing a counter, press the Option soft key to
use the following options:
Add New: allows you to add a new counter.
This menu helps you know how much time it takes for
you to do something, or how many months, days, hours
and minutes until a specific day arrives. You can create
up to 20 counters using this menu.
Edit: allows you to edit the counter.
Erase: allows you to erase the selected counter.
Erase All: allows you to erase all of the counters.
Creating a New Counter
1. Enter the contents for your counter and press the
OK key.
For further details about entering text, see page xx.
92
93
Planner
Alarm Clock
Cannot be checked with
the current phone!!!
MENU 5-7
World Time
Planner
MENU 5-8
This menu allows you to set an alarm to ring at a
specific time.
This menu allows you to check the current time for 12
different time zones around the world.
To set an alarm:
Select the city corresponding to your time zone by
pressing the Navigation keys one or more times. The
local date and time display.
1. Select an alarm type, either Once, or Daily by
pressing the Navigation keys, and then press the OK
key.
2. Enter the time and date for the alarm to ring.
You need to enter the time in 12-hour format. Press
the 2 key for A (AM) or the 7 key for P (PM).
6. Press the OK key to save the alarm setting.
The Alarm icon (
) appears on the display.
To stop the alarm when it rings, press any key.
To turn the DST (Daylight Saving Time) setting on:
1. After selecting the time zone you want to apply the
DST, press the Option soft key.
2. When DST setting highlights, press the OK key.
3. Select On and press the OK key. The DST icon
appears on the left of the time.
Note: The DST setting is not available for countries
other than the USA.
To deactivate an alarm setting, access the Alarm
Clock menu and select Off.
94
95
Planner
Display
Calculator
MENU 5-9
Using this feature, you can use the phone as a
calculator. The calculator provides you with the basic
arithmetic functions; addition, subtraction,
multiplication and division.
1. Enter the first number on the first line using the
numeric keys.
Notes:
• To erase mistakes or clear the display, press
the CLR key.
• Use the key to enter a decimal point and the
key to change the sign of a number to a
negative (-).
2. Enter the operation for your calculation on the
second line by pressing the Navigation keys,
according to the graphic on the display.
3. Enter the second number.
4. Repeat steps 2 and 3 as many times as required.
5. To view the result, press the OK key.
The Display feature enables you to:
• change the display style of the menus.
• select an image to be displayed in Standby Mode or
create your own greeting.
• set the length of time for the backlight.
• select the time zones for the dual clock.
• turn the service light on or off.
Animation
MENU 6-1
You can choose one of the animated images already
available on your phone. Opening, Closing, and
Wallpaper options are available.
Banner
MENU 6-2
This menu allows you to set a banner message to be
displayed at the bottom of the display in Standby
Mode.
1. If necessary, press the CLR key to delete each letter
of the old greeting. Press are hold the CLR key to
clear the display.
2. Enter your banner message. For further details about
how to enter characters, see page xx.
3. When you finish entering the message, press the
OK key to save the new banner.
96
97
Display
Sounds
Backlight
MENU 6-3
You have several options for setting how the LCD,
keypad backlight operates. Remember that backlight
use drains your battery faster.
Select how long the backlight is on after the last key is
pressed or the folder is opened.
When you select Folder open, the backlight remains
on when the folder is open.
When you select Power Save, the phone does not
use the backlight.
Contrast
MENU 6-4
The LCD has contrast setting that can help you see the
screen better in different lighting conditions.
Scroll between the contrast settings to determine
what contrast is most visible to you. When the desired
contrast setting displays, press the OK key.
Auto Hyphen
Volume/Vibrate
MENU 7-1
This menu allows you to adjust the ringer volume and
alert type.
Calls: allows you to adjust the ringer volume for
incoming calls.
Alarm: allows you to adjust the ringer volume for
alarm settings.
Press the Navigation keys to adjust the volume level or
select an alert type. The following options are
available:
- Vib+Ring: the phone rings in the highest volume level
and then vibrates.
- Vibrate: the phone switches to the vibration mode.
An incoming call vibrates the phone.
MENU 6-5
When this option is set to On, your phone
automatically hyphenates numbers when you enter a
phone number, for example, 000-0000000. Digits
following a pause are not hyphenated.
98
You can use the Sounds menu to customize various
sound settings, such as the:
• ringer volume, type, and tone.
• key tone and alert sounds.
• sound which plays when the phone is switched on
or off.
- 1 Beep: the phone sounds a beep.
- Silent: the phone does not sound a ring.
- Level 1 ~ 5: adjust the volume level. The more bars,
the louder the volume.
99
Sounds
Sounds
Notes:
• The options available may be different depending on
the selected ringer item.
• When “Emergency call only” appears after you end
an emergency call, the ringer volume for calls and
messages is automatically set to Level 4.
Ringer Type
MENU 7-2
This menu allows you to set the unique ringer
melodies for the following items:
Calls: allows you to set a unique ringer for incoming
calls.
Alarm: allows you to have a distinctive ring for an
alarm setting.
Data/Fax In: allows you to be alerted with a
distinctive ringer when you receive data or fax calls
through the phone. This feature may not be available
depending on your network.
Planner: allows you to set a unique ringer for
schedules.
Key Beep
MENU 7-3
Using this menu, you can set up the keypad tone that
the phone sounds when you press a key.
The following options are available:
Volume: allows you to adjust the volume of the
keypad tone using the Navigation keys or the Volume
keys on the left side of the phone.
Tone Length: allows you to select Long or Normal
DTMF (dual-tone multi-frequency) tones. DTMF tones
are sent by your phone to access teleservices, such as
a bank account. The system used by the bank or other
service determines if you need short or long DTMF
tones. If the service is digital, as most are, short DTMF
tones will almost always work.
Alerts
MENU 7-4
Your phone gives audible alerts (beeps) at a specified
time to inform you that certain things have happened.
The alerts only occur in your earpiece so that the other
person does not hear them.
The available alerts are:
Minute Beep: When this option is set to On, the
phone sounds an alert 50 seconds before each elapsed
minute to remind you of the length of the current call.
100
101
Sounds
Sounds
Service: When this option is set to On, the phone
sounds an alert when you exit service area or when
you return to a service area.
Connect: When this option is set to On, the phone
sounds the connect tone when your call is connected
to the system.
Disconnect: When this option is set to On, the phone
sounds the disconnect tone when a call is
disconnected.
Fade: When this option is set to On, the phone
sounds an alert when a dropped call occurs during
conversation in response to a signal fade.
Roam: When this option is set to On, the phone
sounds an alert when your phone starts roaming.
Privacy: When this option is set to On, you can set
the security level of your phone to avoid
eavesdropping.
Power On/Off
MENU 7-5
Roam Ringer
MENU 7-6
You can set the phone to use a distinctive ring for
incoming roaming calls.
Select On to use a distinctive ringer or Off to use a
normal ringer.
Whisper Mode
MENU 7-7
Whisper mode automatically increases the receiving
sensitivity of the microphone to obtain the maximum
quality of a call even when you speak in a softer voice
so that the caller can hear you as if you are speaking
normally.
Note: It is not recommended that the earpiece be
used while using Whisper mode. Audio level
may increase without notice depending on the
surrounding conditions.
Select On to use this mode or Off not to use it.
You can turn on or off the tone that the phone sounds
when it is switched on or off.
Select On to use the power on/off sound or Off not to
use it.
102
103
Voice Kit
Voice Kit
Cannot be checked with
the current phone!!!
Tips for Recording a Name
In this menu, you can use the phone’s voice features,
allowing you to:
• dial a number by saying an associated name.
• record a voice memo.
• set the phone to answer a call and record the
caller’s message.
• Avoid recording similar names phonetically. If you
record a similar name to one already in the memory,
the phone requests another name.
Voice Dial
• Avoid too long or too short a name. Names with two
to five syllables are recommended.
MENU 8-1
When your phone is in the digital mode, you can call
up to 20 stored entries by speaking the name into the
microphone. Using the voice dialing option requires
that you first program the phone to recognize the name
of the person you are calling.
Record (MENU 8-1-1)
This menu allows you to record names and register
numbers for subsequent voice dialing. The phone
provides voice prompts and screen displays to guide
you through the recording process.
1. Say the name you want to program at the prompt.
The phone stores the name as a first sample.
2. Respond to the prompt by repeating the name after
the beep. The phone stores the name as a second
sample, and then prompts you to enter the phone
number.
• Speak clearly and naturally.
• The person who will use the phone should record
the name. The phone does not recognize the name if
the voice is different.
• If this feature does not work properly, erase the
name and try again with another name.
• Practice several times to obtain the best result.
• You can record up to 20 names. If you try to record
more than that, the phone announces “Out of space
to store voice dial!”
Review (MENU 8-1-2)
When a list of your stored voice dial numbers displays,
scroll to a entry and press the OK key. The recorded
name plays audibly.
On the number list, press the Option soft key to use
the following options:
Talk: places a call to the number.
Erase: erases the number.
Play All: plays back all of the recorded names.
3. Enter the phone number by pressing the number
keys and press the OK key.
104
105
Voice Kit
Voice Kit
Erase All (MENU 8-1-3)
Voice Memo
This menu erases all of the entries on the Voice Dial
list. When a confirming message displays, select Yes
and press the OK key.
Note: You can quickly enter this menu by pressing the
Up key in Standby Mode.
Set Active (MENU 8-1-4)
Voice Dialing is always active once you have
programmed the phone to accept voice dialing entries
and the associated phone numbers.
To place a call using voice dialing, simply press and
hold the key in Standby Mode and then say the
name into the phone after you hear a prompt.
Using the Set Active menu, you can set how to
initiate a voice dialing call. The following options are
available:
[ ] Only: enables voice dialing only by pressing and
holding the key.
[ ] / Folder: enables voice dialing by pressing and
holding the key or by opening the folder.
[ ] / EarMic: enables voice dialing by pressing and
holding the key or the button on your earmicrophone.
MENU 8-2
Record (MENU 8-2-1)
You can record up to voice memos of 4 minutes total.
This feature shares the memory with the Voice Answer
feature and the amount of time for memos are
dependent on the available memory less any callers'
messages; for example, if your phone has the callers'
messages of 4 minutes total, you cannot record any
voice memo.
1. Record a memo by speaking to the microphone.
When you are recording, a timer displays to show
you the elapsed time.
You can pause recording by pressing the Pause key
and then resume by pressing the Resume key.
2. Press the Stop soft key to end recording. The screen
provides you with the following choices. Scroll to an
option and press the OK key.
• Review: allows you to review the voice memo.
The screen displays the length of the memo along
with the date and time.
• Rerecord: allows you to discard the current
memo and record another one.
• Save: allows you to save the voice memo.
• Quit: allows you to quit recording the memo and
exit the Record menu.
106
107
Voice Kit
Voice Kit
3. When you are satisfied, select Save.
On/Off (MENU 8-3-1)
4. Enter a title for the memo and press the OK key.
This menu allows you to enable or disable the Call
Screen mode.
Review (MENU 8-2-2)
When a list of your voice memos displays, scroll to the
memo you want to review and press the OK key. The
phone plays back the memo.
On the memo list, press the Option soft key to use the
following options:
Play: plays back the memo.
Erase: erases the selected memo.
Erase All (MENU 8-2-3)
This menu allows you to erase all of the voice memos.
Inbox (MENU 8-3-2)
You can listen to the callers’ messages recorded in
your phone. When you access this menu, a list of the
recorded messages appears.
Note: If the phone has the callers’ messages waiting
to be checked, it displays the total number of
the messages and the date and time when the
last message was recorded. Pressing the OK
key takes you to the Inbox.
Press the Up or Down key to scroll to a message and
press the OK key to play it back.
When a confirming message displays, select Yes by
using the Navigation keys, and then press the OK key.
You can pause the playback by pressing the Pause
soft key and then resume by pressing the Resume soft
key.
Call Screen
In the message list, press the Option soft key to the
following options:
MENU 8-3
If you are not able to answer an incoming call, you can
set your phone to answer a call with the preset
greeting message and record the caller’s message. As
this feature shares the memory with voice memos, the
total length of messages is dependent on the available
memory less any voice memos.
Play: plays the selected message.
Note: The Call Screen feature does not work when
your phone is in the analog mode.
Talk: places a call to the caller’s number, if identified.
108
Erase: erases the selected message.
Info: shows detailed information about the message,
such as caller’s number if identified, length, memory
size and date and time when the message was
recorded.
109
Voice Kit
Voice Kit
Greeting (MENU 8-3-3)
Call Sound (MENU 8-3-4)
Your phone provides you with the default greeting
message to be played when a call comes in. You can
also record your own greeting message.
This menu allows you to enable or disable the
screening speaker which allows you to listen to the
caller’s message while the caller is leaving it.
To record a greeting message:
You can answer the call by pressing the SEND key.
1. Select Record and press the OK key.
2. Wait until a beeping prompt sounds and record a
greeting message by speaking into the microphone.
You can pause recording by pressing the Pause soft
key and then resume by pressing the Resume soft
key.
Wait Time (MENU 8-3-5)
This menu allows you to set how long the phone waits
before answering a call with the greeting message.
Selecting Off means that the phone plays back the
message as soon as a call comes in.
3. When recording is complete, press the Stop soft
key. The phone automatically saves and activates
the message.
If you want to play back the currently selected
message, highlight Play by using the Navigation keys,
and then press the OK key.
To enable or disable your own greeting message:
1. Highlight Select by using the Navigation keys, and
then press the OK key.
2. Select Recorded to use your message or Default
to use the default message.
3. Press the OK key to save your selection.
Note: Once you have recorded your own message and
then have changed the greeting to the default
message, your message is deleted.
110
111
Setup
Setup
Many different features of your phone can be
customized to suit your preferences.
Location
MENU 9-1
This menu allows you to turn the Location On or 911
Only. It is set to 911 Only, when you first use your
phone.
This option is automatically turned on when you place
a call to 911. However, this option is turned back off
when your 911 calls is completed.
If you change the NAM, the phone turns off by itself
and back on and acquires service using the new NAM
setting.
Roam Option (MENU 9-2-2)
Roaming is a feature which is only relevant in areas
where there are at least two cellular service providers
having valid roaming agreements. Roaming allows you
to register your phone on one of the networks, but use
the facilities of the other if your own network is not
available. This system priority feature allows you to
program your phone for optimum operation within or
outside your home service area.
Note: Contact your service provider to check
if/when/where location based services are
available.
You should always check your phone’s display because
it will let you know when you’re outside the service
provider network and whether your phone is operating
in another network; the Roaming icon ( ) appears.
Network
You have the following options which allows you to
control the phone’s roaming ability:
MENU 9-2
Your phone allows you to set the preferred system.
Contact your service provider to determine the best
networking methods for you.
Set NAM (MENU 9-2-1)
NAM stands for numerical assignment module,
essentially your phone number. Your phone can have
two NAMs. This means that you can have two phone
numbers for using your phone and can quickly and
easily switch your service back and forth between the
two numbers.
112
Home only: With this setting, you cannot roam. If
your home system is not available, your call will not be
connected and the No Service indicator ( ) is
displayed.
Automatic: Your phone automatically search for a
first available one of all types of service according to
the Preferred Roaming List supplied by the service
provider.
113
Setup
Data/Fax
Setup
MENU 9-3
Your phone is capable of sending and receiving digital
data and fax call when connected to a computing device
(laptop, desktop, handheld, palmtop, etc.) running
Windows 95, Windows 98, Windows NT or later
versions. The phone functions just like a typical modem
on your PC, enabling you to use wireless data involving
a wide variety of Windows software applications.
To use digital data or fax services with your phone, you
will need to obtain a digital data/fax kit from your
service provider. This kit contains the necessary cables,
software, and user’s guide required for your to connect
and use your phone with your computing device.
Note: The phone must be on a digital network to
receive or send faxes and data.
The following options are available:
Auto Detect: allows you to set the phone to
automatically receive data or faxes. The following
options are available:
Data/Fax off: your phone receives voice calls only.
Fax for next call: your phone receives fax calls for the
next 10 minutes.
Fax until powered off: your phone receives fax calls
until you power the phone off and back on .
Baud Rate: allows you to select the speed for the
communication between the phone and
the computing device.
Receiving a Fax or Data File
To receive a fax or data, ensure that your phone is
connected to your PC and is powered on. Select one of
the Data/Fax options.
When you receive a fax call, set up the Answer mode
in the fax program on your PC and click on Receive
and select one of the following:
• Automatic Receive (recommended)
• Manual Receive
Sending a Fax or Data File
When connected to a computing device, your phone
allows wireless fax and data transmissions. Your
computing device software initiates the call to the
destination phone number. The phone functions as a
wireless modem to send the fax or data file to the
number designated by your PC software.
Security
MENU 9-4
Data for next call: your phone receives data calls for
the next 10 minutes.
Your phone provides you with many security options,
including a user-programmable lock code and call
restriction features.
Data until powered off: your phone receives data calls
until you power the phone off and back on.
To access the Security menu, you need to enter a lock
code. The lock code is preset to “0000” at the factory.
114
115
Setup
Setup
Lock Phone (MENU 9-4-1)
Emergency Number (MENU 9-4-3)
When the phone is locked, you cannot operate the
phone until you enter the lock code.
Your phone provides you with the option for storing
three emergency numbers. All of these numbers can
be manually dialed at any time even when your phone
is locked or all of the outgoing calls are restricted.
The following options are available:
Never: The phone remains unlocked.
Now: The phone locks immediately.
On Power-Up: The phone locks automatically the
next time you turn it on.
To place an emergency call, enter the number and then
press the SEND key. The phone recognizes three
emergency numbers stored in the Emergency # menu
(MENU 9-4-3).
To unlock the phone, enter the lock code. The phone is
immediately unlocked and returns to Standby Mode.
Change Lock (MENU 9-4-2)
This feature allows you to change your current lock
code to a new one. The lock code is preset to “0000”
at the factory.
Enter a new, four-digit lock code and then press the
OK key.
IMPORTANT NOTICE!
Emergency calling may not be available on all wireless
networks at all times. A connection cannot always be
guaranteed, due to various transmission methods,
network parameters and user settings used to
complete a call from your wireless phone.
DO NOT depend on this phone as a primary method of
dialing 100 or for any other essential or emergency
communications.
Remember to always turn your phone on and check for
the adequate signal strength before placing a call.
To store an emergency number:
1. Press the Up or Down key to select a location and
press the OK key.
2. If necessary, press and hold the CLR key to clear the
old number.
3. Enter the number you want.
Each emergency number can be up to 24 digits long.
4. Press the OK key to store the number.
To make an emergency call in the lock mode, simply
enter a programmed number, and then press the
SEND key.
116
117
Setup
Voice Privacy (MENU 9-4-4)
Used only in digital networks, Voice Privacy encrypts
the voice channel so that people cannot eavesdrop on
your conversation.
The following options are available:
Setup
Reset Phone (MENU 9-4-7)
Resetting the phone cancels all of your selection in the
user-selectable setting options and returns them to the
factory default settings.
Standard: turns this feature off. The phone will use a
standard line for calls.
When a confirming message displays, select Yes and
press the OK key. The phone turns itself off and back
on, then returns to Standby Mode.
Enhanced: turns this feature on. The phone will
make and receive calls on an encrypted high security
line.
Call Answer
MENU 9-5
Note: This feature may not be available in all areas.
Contact Reliance for details and its availability.
This menu allows you to select how to answer an
incoming call.
Restriction (MENU 9-4-5)
The following options are available:
This feature allows you to restrict all of the outgoing
calls.
Select On to restrict the calls, or Off to deactivate the
restriction.
SEND Key: The phone answers only when you press
the SEND key.
Any Key: The phone answers when you press any key
except for the END key.
Folder Open: The phone answers when you open the
folder.
Erase Memory (MENU 9-4-6)
This feature allows you to clear all of the numbers in
your Phonebook.
When a confirming message displays, select Yes and
press the OK key.
118
119
Setup
Auto Answer
Setup
MENU 9-6
With this menu activated, the phone automatically
answers calls after a specified time. This feature
works only when the phone is connected to an
optional hand-free car kit and is useful while driving,
for instance.
To activate this feature, set how long the phone waits
before answering. Select one from after 1 sec, after
3 sec or after 5 sec.
To deactivate the feature, select Off.
Auto Retry
Clock Set
MENU 9-9
Your phone is equipped with a standard clock and a
dual clock for setting time in multiple cities or
countries.
Your phone automatically displays the time and date
when in digital mode. This information is unavailable
on the screen when your phone is out of service or
when powered up. You can select Main Clock or Dual
Clock for the Wallpaper image; for details, see page
xx.
Main Clock (MENU 9-9-1)
MENU 9-7
When this menu is activated, your phone automatically
redials the call up to 10 times when a connection fails.
To activate this feature, select how often the phone
will automatically retry the call; 10 Seconds, 30
Seconds and 60 Seconds options are available.
To deactivate the feature, select Off.
1. Enter the time and date.
You need to enter the time in 12-hour format. Press
the 2 key for A (AM) or the 7 key for P (PM).
2. Press the OK key to save the setting.
Dual Clock (MENU 9-9-2)
To select time zones for the dual clock:
Language
MENU 9-8
This menu allows you to change the language of voice
prompts, menus and key input.
You can choose either English or Spanish.
120
1. When Location highlights, press the Down key.
2. Select the time zone for the first clock by pressing
the Left or Right key and press the Down key.
3. Select the time zone for the second clock by
pressing the Left or Right key.
121
Setup
Health and Safety
Information
4. Press the OK key to confirm the selection.
To apply the daylight saving time:
1. When Location highlights, press the Left or Right key
to display Summer Time. Press the Down key.
2. Select On to use the daylight saving time for the first
clock. Otherwise, select Off.
3. Press the Down key and repeat step 2 for the second
clock.
4. Press the OK key to confirm the selection.
Version
MENU 9-0
This menu allows you to view the software and
hardware versions of your phone. This feature is helpful
if you need to the call customer care.
Exposure to Radio Frequency (RF) Signals
Your wireless phone is a radio transmitter and
receiver. It is designed and manufactured not to
exceed the emission limits for exposure to radio
frequency (RF) energy set by the Federal
Communications Commission (FCC) of the U.S.
Government. These limits are part of comprehensive
guidelines and establish permitted levels of RF energy
for the general population. The guidelines are based
on the safety standards that were developed by
independent scientific organizations through periodic
and through evaluation of scientific studies.
The standards include a substantial safety margin
designed to assure the safety of all persons,
regardless of age and health.
The exposure standard for wireless phones employs a
unit of measurement known as Specific Absorption
Rate (SAR). The SAR limit set by the FCC is 1.6W/kg *.
* In the U.S. and Canada, the SAR limit for mobile phones used by the
public is 1.6 watts/kg (W/kg) averaged over one gram of tissue. The
standard incorporates a substantial margin of safety to give additional
protection for the public and to account for any variations in
measurements.
122
123
Health and Safety Information
Health and Safety Information
SAR tests are conducted using standard operating
positions specified by the FCC with the phone
transmitting at its highest certified power level in all
tested frequency bands. Although the SAR is
determined at the highest certified power level, the
actual SAR level of the phone while operating can be
well below the maximum value. This is because the
phone is designed to operate at multiple power levels
so as to use only the power required to reach the
network. In general, the closer you are to a wireless
base station antenna, the lower the power output of
the phone.
For Body Operation
Before a new model phone is available for sale to the
public, it must be tested and certified to the FCC that it
does not exceed the limit established by the
government-adopted requirement for safe exposure.
The tests are performed in positions and locations
(e.g., at the ear and worn on the body) as required by
the FCC for each model. While there may be
differences between the SAR levels of various phones
and at various positions, they all meet the government
requirement.
For more Information concerning exposure to radio
frequency signals, see the following websites:
The FCC has granted an Equipment Authorization for
this model phone with all reported SAR levels
evaluated as in compliance with the FCC RF exposure
guidelines. SAR information on this model phone is on
file with the FCC and can be found under the Display
Grant section of http://www.fcc.gov/oet/fccid after
searching on FCC ID printed in the label on the phone.
FCC certification information for this model phone is
attached separation paper.
124
For body worn operation, this model phone has been
tested and meets the FCC RF exposure guidelines
when used with a Samsung-supplied or approved
accessory designated for this product or when used
with and accessory that contains no metal and that
positions the handset a minimum from the body.
The minimum distance for this model phone is written
in the FCC certification information from the body.
None compliance with the above conditions may
violate FCC RF exposure guidelines.
Federal Communications Commission (FCC)
http://www.fcc.gov/rfsafety
Cellular Telecommunications Industry Association
(CTIA): http://www.wow-com.com
U.S.Food and Drug Administration (FDA)
http://www.fda.gov/cdrh/consumer
World Health Organization (WHO)
http://www.who.int/peh-emf/en
125
Health and Safety Information
Precautions When Using Batteries
• Never use any charger or battery that is damaged in
any way.
• Use the battery only for its intended purpose.
• If you use the phone near the network’s base
station, it uses less power; talk and standby time
are greatly affected by the signal strength on the
cellular network and the parameters set by the
network operator.
• Battery charging time depends on the remaining
battery charge and the type of battery and charger
used. The battery can be charged and discharged
hundreds of times, but it will gradually wear out.
When the operation time (talk time and standby
time) is noticeably shorter than normal, it is time to
buy a new battery.
• If left unused, a fully charged battery will discharge
itself over time.
Health and Safety Information
• Do not leave the battery in hot or cold places, such
as in a car in summer or winter conditions, as you
will reduce the capacity and lifetime of the battery.
Always try to keep the battery at room temperature.
A phone with a hot or cold battery may temporarily
not work, even when the battery is fully charged. Liion batteries are particularly affected by
temperatures below 0 °C (32 °F).
• Do not short-circuit the battery. Accidental shortcircuiting can occur when a metallic object (coin,
clip or pen) causes a direct connection between the
+ and – terminals of the battery (metal strips on the
battery), for example when you carry a spare battery
in a pocket or bag. Short-circuiting the terminals
may damage the battery or the object causing the
short-circuiting.
• Dispose of used batteries in accordance with local
regulations. Always recycle. Do not dispose of
batteries in a fire.
• Use only Samsung-approved batteries and recharge
your battery only with Samsung-approved chargers.
When a charger is not in use, disconnect it from the
power source. Do not leave the battery connected to
a charger for more than a week, since overcharging
may shorten its life.
• Extreme temperatures will affect the charging
capacity of your battery: it may require cooling or
warming first.
126
127
Health and Safety Information
Road Safety
Your wireless phone gives you the powerful ability to
communicate by voice, almost anywhere, anytime. But
an important responsibility accompanies the benefits
of wireless phones, one that every user must uphold.
When driving a car, driving is your first responsibility.
When using your wireless phone behind the wheel of
a car, practice good common sense and remember the
following tips.
1. Get to know your wireless phone and its features,
such as speed dial and redial. If available, these
features help you to place your call without taking
your attention off the road.
2. When available, use a hands-free device. If
possible, add an extra layer of convenience and
safety to your wireless phone with one of the many
hands-free accessories available today.
3. Position your wireless phone within easy reach. Be
able to access your wireless phone without
removing your eyes from the road. If you get an
incoming call at an inconvenient time, let your voice
mail answer it for you.
Health and Safety Information
5. Do not take notes or look up phone numbers while
driving. Jotting down a To Do list or flipping through
your Phonebook takes your attention away from your
primary responsibility-driving safely.
6. Dial sensibly and assess the traffic; if possible,
place calls when you are not moving or before
pulling into traffic. Try to plan calls when your car
will be stationary. If you need to make a call while
moving, dial only a few numbers, check the road
and your mirrors, then continue.
7. Do not engage in stressful or emotional
conversations that may be distracting. Make the
people with whom you are talking aware that you
are driving and suspend conversations that have the
potential to divert your attention from the road.
8. Use your wireless phone to call for help. Dial the
emergency number in the case of fire, traffic
accident or medical emergencies. Remember, it is a
free call on your wireless phone!
9. Use your wireless phone to help others in
emergencies. If you see a car accident, crime in
progress or other serious emergency where lives are
in danger, call the emergency number, as you would
want others to do for you.
4. Let the person you are speaking with know you are
driving; if necessary, suspend the call in heavy
traffic or hazardous weather conditions. Rain, sleet,
snow, ice and even heavy traffic can be hazardous.
128
129
Health and Safety Information
10. Call roadside assistance or a special nonemergency wireless assistance number when
necessary. If you see a broken-down vehicle posing
no serious hazard, a broken traffic signal, a minor
traffic accident where no one appears injured, or a
vehicle you know to be stolen, call roadside
assistance or any other special non-emergency
wireless number.
Health and Safety Information
Electronic Devices
Most modern electronic equipment is shielded from
radio frequency (RF) signals. However, certain
electronic equipment may not be shielded against the
RF signals from your wireless phone. Consult the
manufacturer to discuss alternatives.
Pacemakers
Operating Environment
Remember to follow any special regulations in force in
any area and always switch your phone off whenever
it is forbidden to use it, or when it may cause
interference or danger.
When connecting the phone or any accessory to
another device, read its user’s guide for detailed safety
instructions. Do not connect incompatible products.
As with other mobile radio transmitting equipment,
users are advised that for the satisfactory operation of
the equipment and for the safety of personnel, it is
recommended that the equipment should only be used
in the normal operating position (held to your
ear with the antenna pointing over your shoulder).
Pacemaker manufacturers recommend that a minimum
distance of 15 cm (6 inches) be maintained between a
wireless phone and a pacemaker to avoid potential
interference with the pacemaker. These
recommendations are consistent with the independent
research and recommendations of Wireless Technology
Research.
Persons with pacemakers:
• Should always keep the phone more than 15 cm (6
inches) from their pacemaker when the phone is
switched on
• Should not carry the phone in a breast pocket
• Should use the ear opposite the pacemaker to
minimize potential interference
If you have any reason to suspect that interference is
taking place, switch your phone off immediately.
Hearing Aids
Some digital wireless phones may interfere with some
hearing aids. In the event of such interference, you
may wish to consult your hearing aid manufacturer to
discuss alternatives.
130
131
Health and Safety Information
Other Medical Devices
If you use any other personal medical devices, consult
the manufacturer of your device to determine if it is
adequately shielded from external RF energy. Your
physician may be able to assist you in obtaining this
information. Switch your phone off in health care
facilities when any regulations posted in these areas
instruct you to do so. Hospitals or health care facilities
may be using equipment that could be sensitive to
external RF energy.
Vehicles
RF signals may affect improperly installed or
inadequately shielded electronic systems in motor
vehicles. Check with the manufacturer or its
representative regarding your vehicle.
You should also consult the manufacturer of any
equipment that has been added to your vehicle.
Posted Facilities
Switch your phone off in any facility where posted
notices require you to do so.
132
Health and Safety Information
Potentially Explosive Environment
Switch your phone off when in any area with a
potentially explosive atmosphere and obey all signs
and instructions. Sparks in such areas could cause an
explosion or fire resulting in bodily injury or even
death.
Users are advised to switch the phone off while at a
refueling point (service station). Users are reminded of
the need to observe restrictions on the use of radio
equipment in fuel depots (fuel storage and distribution
areas), chemical plants or where blasting operations
are in progress.
Areas with a potentially explosive atmosphere are
often but not always clearly marked. They include
below deck on boats, chemical transfer or storage
facilities, vehicles using liquefied petroleum gas (such
as propane or butane), areas where the air contains
chemicals or particles, such as grain, dust or metal
powders, and any other area where you would
normally be advised to turn off your vehicle engine.
133
Health and Safety Information
Health and Safety Information
Emergency Calls
Other Important Safety Information
This phone, like any wireless phone, operates using
radio signals, wireless and landline networks as well
as user-programmed functions, which cannot
guarantee connection in all conditions. Therefore, you
should never rely solely on any wireless phone for
essential communications (medical emergencies, for
example).
• Only qualified personnel should service the phone or
install the phone in a vehicle. Faulty installation or
service may be dangerous and may invalidate any
warranty applicable to the device.
Remember, to make or receive any calls the phone
must be switched on and in a service area with
adequate signal strength. Emergency calls may not be
possible on all wireless phone networks or when
certain network services and/or phone features are in
use. Check with local service providers.
• Do not store or carry flammable liquids, gases or
explosive materials in the same compartment as the
phone, its parts or accessories.
To make an emergency call:
1. If the phone is not on, switch it on.
2. Key in the emergency number for your present
location. Emergency numbers vary by location.
3. Press the SEND key.
If certain features are in use (call barring, for example),
you may first need to deactivate those features before
you can make an emergency call. Consult this
document and your local cellular service provider.
When making an emergency call, remember to give all
the necessary information as accurately as possible.
Remember that your phone may be the only means of
communication at the scene of an accident; do not cut
off the call until given permission to do so.
134
• Check regularly that all wireless phone equipment in
your vehicle is mounted and operating properly.
• For vehicles equipped with an air bag, remember
that an air bag inflates with great force. Do not
place objects, including both installed or portable
wireless equipment in the area over the air bag or in
the air bag deployment area. If wireless equipment
is improperly installed and the air bag inflates,
serious injury could result.
• Switch your phone off before boarding an aircraft.
The use of wireless phones in aircraft may be
dangerous to the operation of the aircraft, and is
illegal.
• Failure to observe these instructions may lead to the
suspension or denial of telephone services to the
offender, or legal action, or both.
135
Health and Safety Information
Care and Maintenance
Your phone is a product of superior design and
craftsmanship and should be treated with care. The
suggestions below will help you fulfill any warranty
obligations and allow you to enjoy this product for
many years.
• Keep the phone and all its parts and accessories out
of the reach of small children’s.
• Keep the phone dry. Precipitation, humidity and
liquids contain minerals that will corrode electronic
circuits.
• Do not use the phone with a wet hand. Doing so
may cause an electric shock to you or damage to the
phone.
Health and Safety Information
• Do not use harsh chemicals, cleaning solvents or
strong detergents to clean the phone. Wipe it with a
soft cloth slightly dampened in a mild soap-andwater solution.
• Do not paint the phone. Paint can clog the device’s
moving parts and prevent proper operation.
• Do not put the phone in or on heating devices, such
as a microwave oven, a stove or a radiator. The
phone may explode when overheated.
• Use only the supplied or an approved replacement
antenna. Unauthorized antennas or modified
accessories may damage the phone and violate
regulations governing radio devices.
• Do not use or store the phone in dusty, dirty areas,
as its moving parts may be damaged.
• If the phone, battery, charger or any accessory is not
working properly, take it to your nearest qualified
service facility. The personnel there will assist you,
and if necessary, arrange for service.
• Do not store the phone in hot areas. High
temperatures can shorten the life of electronic
devices, damage batteries, and warp or melt certain
plastics.
Acknowledging Special Precautions and the
FCC and Industry Canada Notice
• Do not store the phone in cold areas. When the
phone warms up to its normal operating
temperature, moisture can form inside the phone,
which may damage the phone’s electronic circuit
boards.
Cautions
Modifications not expressly approved by the party
responsible for compliance could void the user's
authority to operate the equipment.
• Do not drop, knock or shake the phone. Rough
handling can break internal circuit boards.
136
137
Health and Safety Information
Glossary
FCC Compliance Information
This device complies with Part 15 of FCC Rules.
Operation is subject to the following two conditions:
(1) This device may not cause harmful interference,
and
(2) This device must accept any interference received.
Including interference that may cause undesired
operation.
Information to User
This equipment has been tested and found to comply
with the limits for a Class B digital device, pursuant to
part 15 of the FCC Rules. These limits are designed to
provide reasonable protection against harmful
interference in a residential installation.
This equipment generates, uses and can radiate radio
frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful
interference to radio communications. However, there
is no guarantee that interference will not occur in a
particular installation. If this equipment does cause
harmful interference to radio or television reception,
which can be determined by turning the equipment off
and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment
and receiver.
• Connect the equipment into an outlet on a circuit
different from that to which the receiver is
connected.
• Consult the dealer or an experienced radio/ TV
technician for help.
138
Airtime - Actual time spent talking on the wireless
phone. Most carriers bill customers based on how
many minutes of airtime they use each month.
Antenna - A device for transmitting or receiving
signals. The size and shape of antennas is determined,
in part, by the frequency of the signal they receive.
Wireless phones and the base station must have
antennas.
Base Station - The fixed radio transmitter/receiver
that maintains communications with mobile radio
telephones within a given area. (Typically called a cell
or cell site)
CDMA (Code Division Multiple Access) A spreadspectrum approach to digital transmission. With
CDMA, each conversion is digitized and then tagged
with a code. The mobile phone deciphers only a
particular code to pick the right conversation off the
air. The transmitted signal is just above noise level
across the available bandwidth.
Channel - Communications signals transmit along
paths called channels.
Codec - Compression & Decompression.
Deactivation - The process of rendering a wireless
phone inactive.
139
Glossary
Glossary
DTMF - (Dual-tone Multi-Frequency ) You send DTMF
signals when you enter numbers by pressing the digit
keys.
Prepend - The addition of a prefix, such as an area
code, to a phone number.
EVRC - (Enhanced Variable Rate Codec) EVRC is a new
global standard for compressing and decompressing
voice signals. EVRC uses a lower bit rate (the number
of bits sent per second) than existing CDMA vocoders,
while providing significant improvements in voice
quality. This technology enables your phone to provide
superb voice quality while benefiting from the ability
to process more cellular voice calls using less
bandwidth than the voice codecs in CDMA networks
today.
Roaming - The ability to use a wireless phone to
make and receive calls in places outside of the home
service area.
Frequency - A measure based on time, as one or
more waves per second, in an electrical or light wave
information signal. A signal’s frequency is stated in
cycles-per-second or Hertz (Hz).
Hands-Free - A feature that permits a driver to use a
wireless phone without lifting or holding the handset an important safety feature for automobiles, tractors
and most other motorized vehicles.
RF - Radio Frequency
Service Charge - The amount paid each month to
receive wireless service.
Standby Time - The amount of time a fully charged
wireless portable or transportable phone can be on
and idle without being in use. (See Talk Time)
Talk Time - The length of time a person can talk on a
portable or transportable wireless phone without
recharging the battery.
Vocoder - Voice Coder. A device used to convert
speech into digital signals.
Wireless - Radio-based Systems that allow
transmission of telephone or data signals through the
air without a physical connection, such as a metal wire
(copper) or fiber optic cable.
LCD - (Liquid Crystal Display) Commonly used to refer
to the screen display on the wireless phone.
LED - (Light Emitting Diode) Commonly used to refer to
a small light on the wireless phone or on the Desktop
Charger. The LED lights on the phone to indicate an
incoming call. The lights on the charger indicate that
battery charging is taking place.
140
141
Index
Index
Accessories • 9
Air time (1-5) • 55
Alarm (5-5) • 84
Alerts (7-3) • 98
Animation • 101
Auto answer (0-1) • 105
Auto retry (0-3) • 106
Backlight (8-4) • 102
Banner (8-3) • 102
Battery
charging • 18
installing • 17
low battery indicator • 20
removing • 18
precautions • 116
Calculator (5-6) • 85
Call
answer (0-2) • 105
answering • 34
emergency • 25
ending • 25
forwarding • 37
from Phone Book • 26
incoming (1-2) • 53
making • 24
missed • 36
outgoing (1-1) • 52
redialing last • 25
restriction • 111
three way • 39
waiting • 38
Caller ID • 36
Camera (#) • 114
Care • 126
Characters, entering • 40
Charging batteries • 18
Clock • 103
142
The index will be updated in
a later version
Connect tone • 98
Contrast (8-6) • 103
Correcting number • 25
Icon description • 13
Inbox ( 3-3) • 66
In-call options • 35
Incoming calls (1-2) • 53
Installing battery • 17
Names
entering • 40
find (2-1) • 56
NAM setting (0-5) • 107
Number
adding in an entry • 60
correcting • 25
my phone # (2-4)• 61
searching • 56
Data/fax
receiving/sending • 109
Data/fax (0-7) • 108
Dialing
pause • 29
prepend • 26
speed • 27
voice • 32, 88
Disconnect tone • 98
Display
LCD • 10
external • 15
DTMF tone
length (7-6) • 99
Dual clock (8-5) • 103
Erasing History (1-4) • 54
Erase Msg (3-7) • 69
External Display • 15
Maintenance • 126
Memo pad (5-4) • 83
Memory (2-5) • 61
Memory, clearing • 113
Menus
list • 49
scrolling • 47
shortcuts • 48
Messages
erasing • 69
filed • 68
greeting • 94
setup (3-8) • 70
voice • 65
Minute beep • 98
Missed calls • 36
Modes
phone • 22
text input • 40
Mute
microphone • 35
Finding
phonebook • 56
Games (9) • 104
Greeting • 94
Key Beep (7-5) • 99
Keys
description • 11
location • 10
Language (0-4) • 106
Last number redialing • 25
Letters, entering • 40
Listening
voicemail •65
Lock code • 111
Low battery indicator • 20
Outbox (3-4) • 67
Outgoing calls (1-1) • 52
Phone
layout • 10
lock • 110
my number (2-4) • 61
Phonebook (2) • 56
PIN
code • 112
Planner (5) • 79
Power save mode • 23
Prepend dialing • 26
Redialing
auto • 106
last call • 25
Removing battery • 18
Reset phone • 113
Restrict • 111
Ring
type (7-2) • 97
volume (7-1) • 96
Roam ringer (7-4) • 99
143
Index
SCH-A650 Quick Reference Card
Phonebook
Search
Speed dialing
Save a Number
Enter Phone Book → Find
menu + Up/Down + OK
Enter Memory Location of the
number you want, holding the last
digit to automatically dial.
Enter Number + OK + OK + Left/
Right to select Home / Office /
Pager / Fax + OK + Enter Name +
OK + Option soft key to enter
information + OK
BASIC OPERATIONS
END
Phone number + SEND
SEND or open the phone
Make a call
Receive a call
(in Standby Mode)
/ on the left side
End a call
Adjust the key
beep volume
(during a conversation)
/ on the left side
145
144
Adjust the
speaker volume
Version (0-8) • 110
Voice answer (6-3) • 92
Voice dial (6-1) • 88
Voice memo (6-2) • 91
Voice message (3-2) • 65
Volume, adjusting
ring (7-1) • 96
key (7-5) • 99
Press
Launch the web
browser
Unpacking • 9
SEND twice
Redial the last call
Task List (5-3) • 82
Text, entering • 40
Today (5-1) • 79
Tone length (7-6) • 99
T9 text mode • 42
Hold
Switch to the
silent mode
Web Browser
get in web (4-1) • 73
prompt (4-2) • 78
World time (5-7) • 86
Writing new message • 62
Hold
or open the folder
+ Say a name
Safety
batteries • 116
information • 116
precautions • 7
Schedular (5-2) • 81
Searching
phonebook • 56
Security (0-9) • 110
Service alert • 98
Service light • 16
Setting NAM (0-5) • 107
Setting system (0-6) • 107
Setting time (5-9) • 87
Setup (0) • 105
Sounds (7) • 96
Speed dialing • 27
Standby mode • 22
Switching on/off
phone • 21
Voice dialing
146
1:
2:
3:
4:
5:
6:
7:
8:
9:
1 : Get In Web
2 : Prompt
1:
2:
3:
4;
5:
6:
7:
8:
9:
3 : Message
4 : Mobile Web
5 : Planner
Today
Scheduler
Jump To Date
To Do List
Memo Pad
Count Down
Alarm Clock
World Time
Calculator
Send New Msg
Voice
Inbox
Outbox
Draft Msg
Saved Msg
Web Alert
Msg Setting
Erase Msg
Find
Add
Rename Group
My Phone#
Memory
1:
2:
3:
4:
5:
2 : Phone Book
Outgoing
Incoming
Missed
Erase Logs
Call Timer
1:
2:
3:
4:
5:
1 : Voice Dial
2 : Voice Memo
3 : Call Screen
1:
2:
3:
4:
5:
6:
7:
8:
9:
0:
8 : Voice Kit
9 : Setup
Location
Network
Data/Fax
Security
Call Answer
Auto Answer
Auto Retry
Language
Clock Set
Version
Volume/Vibrate
Ringer Type
Key Beep
Alerts
Power On/Off
Roam Ringer
Whisper Mode
1:
2:
3:
4:
5:
6:
7:
7 : Sounds
Animation
Banner
Backlight
Contrast
Auto Hyphen
1:
2:
3:
4:
5:
6 : Display
Main Menu (To access, press the Menu soft key)
MENU TREE
1 : Calls
Licensed by QUALCOMM Incorporated under one or more
of the following Patents.
U.S Patent No. 4,901,307 5,056,109 5,099,204
5,101,501 5,103,459 5,107,225
5,109,390
147

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.4
Linearized                      : No
Modify Date                     : 2003:10:10 15:16:50-04:00
Create Date                     : 2003:10:01 13:42:55-04:00
Producer                        : Acrobat Distiller 5.0 (Windows)
Page Count                      : 74
Mod Date                        : 2003:10:10 15:16:50-04:00
Creation Date                   : 2003:10:01 13:42:55-04:00
Metadata Date                   : 2003:10:10 15:16:50-04:00
Has XFA                         : No

EXIF Metadata provided by EXIF.tools