| Download: |  |
| Mirror Download [FCC.gov] | |
| Document ID | 1720303 |
| Application ID | ssgA2tEdSK6ZSp647zcrKw== |
| Document Description | Users Manual 2 |
| Short Term Confidential | No |
| Permanent Confidential | No |
| Supercede | No |
| Document Type | User Manual |
| Display Format | Adobe Acrobat PDF - pdf |
| Filesize | 131.61kB (1645079 bits) |
| Date Submitted | 2012-06-11 00:00:00 |
| Date Available | 2012-06-11 00:00:00 |
| Creation Date | 2017-10-31 07:11:53 |
| Producing Software | GPL Ghostscript 9.18 |
| Document Lastmod | 2017-10-31 07:11:53 |
| Document Title | Egmont_F_english.book |
| Document Creator | FrameMaker 8.0 |
| Document Author: | DE |
Useful network programs
There are several programs available to setup the network settings easily in a
network environment. For the network administrator especially, managing
several machines on the network is possible.
• Before using the programs below, set the IP address first.
• Some features and optional goods may not be available depending on
model or country (see "Features by models" on page 7).
SyncThru™ Web Admin Service
Web-based machine management solution for network administrators.
SyncThru™ Web Admin Service provides you with an efficient way of managing
network devices and lets you remotely monitor and troubleshoot network
machines from any site with corporate internet access.
•
Download this program from http://solution.samsungprinter.com.
SyncThru™ Web Service
The web server embedded on your network machine allows you to do the
following tasks (see "Using SyncThru™ Web Service" on page 202).
•
Check the supplies information and status.
•
Customize machine settings.
•
Set the email notification option. When you set this option, the machine
status (toner cartridge shortage or machine error) will be sent to a certain
person's email automatically.
•
Configure the network parameters necessary for the machine to connect to
various network environments.
SetIP wired network setup
This utility program allows you to select a network interface and manually
configure the IP addresses for use with the TCP/IP protocol.
•
See "IPv4 configuration using SetIP (Windows)" on page 134.
•
See "IPv4 configuration using SetIP (Macintosh)" on page 135.
•
See "IPv4 configuration using SetIP (Linux)" on page 136.
• The machine that does not support the network port, it will not be able
to use this feature (see "Rear view" on page 24).
• TCP/IPv6 is not supported by this program.
2. Using a Network-Connected Machine
133
Wired network setup
Printing a network configuration report
Setting IP address
You can print Network Configuration Report from the machine’s control panel
that will show the current machine’s network settings. This will help you to set
up a network.
• The machine that does not support the network interface, it will not be
able to use this feature (see "Rear view" on page 24).
• TCP/IPv6 is not supported by this program.
•
Press the
(Menu) button on the control panel and select Network >
Network Conf. (Network Configuration).
Using this Network Configuration Report, you can find your machine’s MAC
address and IP address.
First, you have to set up an IP address for network printing and managements.
In most cases a new IP address will be automatically assigned by a DHCP
(Dynamic Host Configuration Protocol) server located on the network.
For example:
•
MAC Address: 00:15:99:41:A2:78
•
IP Address: 169.254.192.192
IPv4 configuration using SetIP (Windows)
Before using the SetIP program, disable the computer firewall from Control
Panel > Security Center > Windows Firewall.
Install this program from the supplied CD-ROM by double-click
Application > SetIP > Setup.exe.
Follow the instructions in the installation window.
Connect your machine to the network with a network cable.
Turn on the machine.
From the Windows Start menu, select All Programs > Samsung
Printers > SetIP > SetIP.
2. Using a Network-Connected Machine
134
Wired network setup
Click the
icon (third from left) in the SetIP window to open the TCP/
IP configuration window.
Enter the machine’s new information into the configuration window as
follows. In a corporate intranet, you may need to have this information
assigned by a network manager before proceeding.
IPv4 configuration using SetIP (Macintosh)
Before using the SetIP program, disable the computer firewall from System
Preferences > Security > Firewall.
The following instructions may vary from your model.
Find the machine’s MAC address from the Network Configuration Report
(see "Printing a network configuration report" on page 134) and enter it
without the colons. For example, 00:15:99:29:51:A8 becomes
0015992951A8.
Connect your machine to the network with a network cable.
Double-click the file and Safari will automatically open, then select
Trust. The browser will open the SetIPapplet.html page that shows the
printer’s name and IP address information.
Click the
icon (third from left) in the SetIP window to open the TCP/
IP configuration window.
Enter the machine’s new information into the configuration window. In
a corporate intranet, you may need to have this information assigned by
a network manager before proceeding.
Insert the Installation CD-ROM, and open the disk window, select
MAC_Installer > MAC_Printer > SetIP > SetIPapplet.html.
Click Apply, and then click OK. The machine will automatically print the
Network Configuration Report. Confirm that all the settings are
correct.
2. Using a Network-Connected Machine
135
Wired network setup
Find the machine’s MAC address from the Network Configuration Report
(see "Printing a network configuration report" on page 134) and enter it
without the colons. For example, 00:15:99:29:51:A8 becomes
0015992951A8.
Select Apply, then OK, and OK again.
Find the machine’s MAC address from the Network Configuration Report
(see "Printing a network configuration report" on page 134) and enter it
without the colons. For example, 00:15:99:29:51:A8 becomes
0015992951A8.
The machine will automatically print the Network Configuration
Report.
Quit Safari.
IPv4 configuration using SetIP (Linux)
Before using the SetIP program, disable the computer firewall from System
Preferences or Administrator.
The following instructions may vary from your model or operating systems.
Open /opt/Samsung/mfp/share/utils/.
Double-click the SetIPApplet.html file.
Click to open the TCP/IP configuration window.
Enter the machine’s new information into the configuration window. In
a corporate intranet, you may need to have this information assigned by
a network manager before proceeding.
2. Using a Network-Connected Machine
136
Installing driver over the network
• Some features and optional goods may not be available depending on
model or country (see "Features by models" on page 7).
Select Install Now.
• The machine that does not support the network interface, it will not be
able to use this feature (see "Rear view" on page 24).
Windows
Make sure that the machine is connected to the network and powered
on. Also, your machine’s IP address should have been set (see "Setting IP
address" on page 134).
If the “Found New Hardware Wizard” appears during the installation
procedure, click Cancel to close the window.
Insert the supplied software CD into your CD-ROM drive.
The Custom Installation allows you to select the machine’s connection and
choose individual components to install. Follow the instructions on the
window.
Read License Agreement, and select I accept the terms of the License
Agreement. Then, click Next.
The program searches for the machine.
2. Using a Network-Connected Machine
137
Installing driver over the network
If your machine is not found on the network or locally, an error message
appears. Select the option you want and click Next.
The searched machines will be shown on the screen. Select the one you
wish to use and click OK.
Following command-line are effective and operated when command is
used with /s or /S. But /h, /H or /? are exceptional commands that can be
operated solely.
Command- line
/s or
If the driver searched only one machine, the confirmation window appears.
Follow the instructions in the installation window.
Silent installation Mode
Silent installation mode is an installation method that does not require any user
intervention. Once you start the installation, the machine driver and software
are automatically installed on you computer. You can start the silent installation
by typing /s or /S in the command window.
Command-line Parameters
Definition
Starts silent installation.
/S
/p”” or Specifies printer port.
/P””
Network Port will
be created by use
of Standard TCP/IP
Port monitor. For
local port, this port
must exist on
system before
being specified by
command.
Description
Installs machine drivers
without prompting any UIs
or user intervention.
Printer port name can be
specified as IP address,
hostname, USB local port
name or IEEE1284 port
name.
For example:
•
/p”xxx.xxx.xxx.xxx” in
where, “xxx.xxx.xxx.xxx”
means IP address for
network printer. /
p”USB001”, /P”LPT1:”, /
p”hostname”
Following table shows commands that can be used in the command window.
2. Using a Network-Connected Machine
138
Installing driver over the network
Command- line
Definition
/a”” or
Specifies destination path
for installation.
/A””
The destination
path should be a
fully qualified path.
/i”