Samsung Electronics Co SGHT999 Cellular/ PCS GSM/ WCDMA and AWS WCDMA Phone with WLAN, Bluetooth and RFID User Manual T Mobile SGH T989 Galaxy S II

Download:
Mirror Download [FCC.gov]
Document ID	1701512
Application ID	13t3NjzsAFILbLVi/M8IKA==
Document Description	Users Manual 2
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	391.7kB (4896247 bits)
Date Submitted	2012-05-18 00:00:00
Date Available	2012-11-14 00:00:00
Creation Date	2017-10-31 15:13:21
Producing Software	GPL Ghostscript 9.18
Document Lastmod	2017-10-31 15:13:21
Document Title	T-Mobile SGH-T989 Galaxy S II User Manual
Document Creator	FrameMaker 9.0
Document Author:	psalvado

• TV Store: displays TV shows that are available for purchase. Scroll
through the movie categories at the top of the screen. Touch a
category and TV shows of that type display.
4. Scroll through the media listings and tap on an item you
would like to purchase or rent.
5.
Tap WATCH PREVIEW to watch a short preview or tap Rent
or Own.
6.
Choose a payment method and then follow the on-screen
instructions. The media stores to the My Media folder.
Media Hub Notices
• Any media item (Media Content) may be rented or purchased after you
create an account in Media Hub.
• Media Content that is downloaded may be viewed concurrently on up
to five (5) devices with Media Hub that are also registered to the same
account.
• You may choose to remove a device from your account no more than
once every 90 days.
• You may remove Media Content from a device as many times as you’d
like. You will have the ability to re-download the Media Content at a
later point in time subject to content re-download availability and
studio permissions.
• You MUST be in network coverage to license Media Content you have
acquired through the Service.
135
• You can use 3G, 4G, or Wi-Fi connectivity in order to download Media
Content.
• Unlike purchased Media Content, rented Media Content will be
viewable on only 1 device in your account.
• Media Content is downloaded and saved onto the SD card.
• Your Media Content may pause/stop or not download in networks
where there is a weak signal.
• You may begin watching downloaded Media Content as soon as a)
license acquisition has occurred and b) sufficient amount of the Media
Content has been buffered.
• You must finish watching rented Media Content within 24 consecutive
hours of start of playback.
• Stopping, pausing or restarting rented Media Content does not
extend the available viewing time.
• In no event will rented Media Content be available for a period of
more than thirty (30) days (or shorter on a title-by-title basis) after
the Media Content has been rented (e.g., if you begin viewing
rented Media Content on the 29th day after the rental transaction,
but do not finish viewing the entire title, that rented Media Content
may not be available for the entire twenty-four (24) consecutive
hour period if such period would extend the viewable time beyond
the thirty (30) day rental window).
• You cannot play any media content downloaded from Media Hub
through any output on your mobile phone, including All Share.
Music
5.1Ch
((
))
Playing Music
1.
From the Home screen, tap
(Applications) ➔
Plays the entire song list once.
(Music). Music player tips display.
2.
Tap Done.
3.
Touch a tab to select the music category: All, Playlists,
Replays the current list when the list ends.
Repeats the currently playing song.
shuffles the current list of songs randomly.
Albums, or Artists.
4.
songs play in order and are not shuffled.
Scroll through the list and tap an entry to begin playback.
List
Note: The 5.1 channel sound effect works when earphones or sound is
connected through the headset jack only.
5.
The following Music Player controls are available:
Pause the song.
Now playing
Press and hold to fast-forward the song. Tap to go
to next song.
Volume control.
lists the current playlist songs
displays the current song in the player window
Making a Song a Phone Ringtone
1.
From the Home screen, tap
(Applications) ➔
(Music).
Start the song after pausing.
Press and hold to rewind the song. Tap to go to
previous song.
Allows you to listen to music using 5.1 Virtual
Surround Sound.
2.
Tap the All tab.
3.
Touch and hold a song from the list to reveal the
on-screen context menu.
4.
Tap Set as ➔ Phone ringtone.
Multimedia
136
Music Player Options
The Music Player Settings menu allows you to set preferences for
the music player such as whether you want the music to play in
the background, sound effects, and how the music menu
displays.
䊳
With the music player application displayed, press
and select one of the following options:
• Add to quick list: adds the selected music file to a quick playlist.
• Via Bluetooth: plays the music through a Bluetooth stereo headset.
• Share music via: shares a music file via AllShare, Bluetooth, Email,
Gmail, Messaging, or Wi-Fi.
• Set as: sets this song as a Phone ringtone, Caller ringtone, or Alarm
tone.
• Add to playlist: adds a song to the playlist.
• More:
– Settings: allows you to activate or deactivate the Equalizer, Effect,
Music menu, or Visualization. The Music menus allow you to decide
what you want to display. Selections are: Albums, Artists, Genres,
Folders, Composers, Years, Most played, Recently played, or Recently
added. Touch each item that you want to display in the Music menu.
– Details: displays details about the selected music.
– Stop playing music: stops playing the currently selected song or
playlist.
137
Using Playlists
Playlists are used to assign music files into groups for playback.
These Playlists can be created using the Music player on this
device, or using a third-party application (such as Windows
Media Player) and downloading those files to an SD card inserted
into the device.
Creating a Playlist
1.
From the Home screen, tap
(Applications) ➔
(Music).
2.
Tap the Playlists tab.
3.
Press
4.
Backspace over the default playlist title and type a new
and then tap Create.
name for this playlist, then tap Save.
Adding Music to a Playlist
1.
From the Home screen, tap
(Applications) ➔
(Music).
2.
Tap the Playlists tab.
3.
Tap the playlist name in which to add music.
4.
Press
Only those playlist you have created can be edited. Default
playlists can not be renamed.
and then tap Add.
– or –
Tap
1.
(Add music).
From the Home screen, tap
(Applications) ➔
(Music).
Note: If a playlist is empty, add a song by touching a holding a song name
from the main screen to open the context menu. Select Add to playlist.
5.
Removing Music from a Playlist
From the Home screen, tap
(Applications) ➔
(Music).
2.
Tap the Playlists tab.
3.
Tap the playlist name in which to delete music.
4.
Touch and hold a song to reveal the on-screen context
menu.
5.
Tap the Playlists tab.
3.
Touch and hold a playlist entry to reveal the on-screen
Tap a music file, or tap Select all to add all the music tracks
to this playlist then tap Add.
1.
2.
Tap Remove ➔ OK.
Editing a Playlist
Besides adding and removing music files in a playlist, you can
also share, delete, or rename the playlist.
context menu.
4.
Tap Edit title.
5.
Enter a new name for this playlist and tap Save.
Transferring Music Files
Music files can be downloaded to the phone using one of two
methods:
1.
Downloaded to the phone from or Android Market.
Music files are directly stored on your phone.
2.
Downloaded to the phone via a direct USB connection.
Music files are stored into a Music folder on the SD card.
For more information, refer to “Connecting to the SD card” on
page 52.
Multimedia
138
Removing Music Files
1.
From the Home screen, tap
(Applications) ➔
(Music).
3.
2.
Tap the All tab.
3.
Touch and hold a song entry to reveal the on-screen
4.
Note: T-Mobile TV must be initialized over a cellular network before it can be
used. During this initial registration process, any current Wi-Fi
connections must be disabled.
connection.
context menu.
4.
Tap Start Trial to begin a free 30-day trial of the service.
Tap Delete ➔ OK. The music file(s) is deleted.
5.
Tap any of the following categories to begin viewing:
Live TV, On Demand, My Media, More Info, Browse, or Live
T-Mobile TV
T-Mobile TV is an application that allows you to get live TV and
Video on Demand.
1.
Tap Disable Wi-Fi if you currently have an active Wi-Fi
From the Home screen, tap
(Applications) ➔
(T-Mobile TV). The T-Mobile Terms and Conditions
page displays.
Channels.
YouTube
YouTube is a video sharing website on which users can upload
and share videos, and view them in MPEG-4 format.
1.
From the Home screen, tap
(Applications) ➔
(YouTube).
Note: A data plan is required to use this feature. Charges may apply. Please
contact your service provider for further details.
2.
Tap Accept if you accept the Terms and Conditions, or
touch Exit.
2.
Tap Accept if you accept the Terms and Conditions.
– or –
Tap Exit to close the application.
3.
When the screen loads you can begin searching and
viewing posted videos.
4.
Press
➔ Settings ➔ High quality on mobile if you
prefer high quality output.
139
Section 9: Applications and Development
This section outlines the various applications that are available
on your phone.
Applications
The Applications list provides quick access to all the available
applications on the phone.
Refer to the application table on page 37 for a description of each
Application, its function, and how to navigate through that
particular application. If the application is already described in
another section of this user manual, then a cross reference to
that particular section is provided.
Accounts and sync
This application allows you to configure general synchronization
settings that determine whether the background data is
synchronized, and whether you automatically synchronize data
with the phone.
䊳
From the Home screen, tap
(Applications) ➔
(Accounts and sync).
For more information, refer to “Accounts and Synchronization”
on page 219.
411 & More
Provides more than just single tap access to directory assistance
and other portals. Available categories include: 411 Directory
Assistance, Current Weather, and more.
1.
From the Home screen, tap
(Applications) ➔
(411 & More).
2.
Tap an on-screen option and follow the on-screen
prompts. Choices include: 411 Directory Assistance,
Current Weather, Horoscopes and Sports Report.
Applications and Development
140
Configuring AllShare Settings
AllShare
This application wirelessly synchronizes your Samsung mobile
phone with your TV, streams content and even keeps tabs on
who calls or sends text messages with real-time, on-screen
monitoring. Samsung’s AllShare makes staying connected easy.
Allows users to share their in-device media content with other
external devices using DLNA certified™ (Digital Living Network
Alliance) Devices. These external devices must also be DLNAcompliant. Wi-Fi capability can be provided to TVs via a digital
multimedia streamer.
Important!: You must activate Wi-Fi to use this application. For more
information, refer to “Wi-Fi settings” on page 194.
1.
From the Home screen, tap
(Applications) ➔
(AllShare).
2.
Follow the on-screen prompts.
The application contains two separate streaming media options:
• My device allows you to stream/share selected multimedia content
from your device to DLNA compliant device connected to the same
WAP.
• Remote device allows you to receive and playback media stored
externally (server, laptop, etc.) directly on your device.
141
The AllShare™ application must first be configured prior to its
initial use. You must setup parameters such as connected Wi-FI,
Items to share, source server address, and external device
acceptance rights.
1.
From the Home screen, tap
(Applications) ➔
(AllShare).
2.
Press
and then tap Settings and configure the
following settings as desired:
• Device name: defaults to your phone. Use the keypad to enter a
new Media server if desired, and tap Save.
• Share video/picture/audio: allows you to restrict what is shared
from your phone. Tap the items you want to share.
• Upload from other devices: allows you set the phone to select
how uploads from other devices are started. Tap Always accept,
Always ask, or Always reject.
• Default memory: allows you to have media saved to your Phone or
Memory Card. Tap an option.
• Subtitles: allows you to see subtitles on shared media.
Depending on the setting you changed, a pop-up screen
may display to restart AllShare. Tap Yes to continue.
Transmitting Media via AllShare
1.
Blio
Tap the My device tab, select Videos, Photos, or Music, and
then tap on the media that you would like to share.
2.
At the Select device screen, any devices that you can share
1.
with are displayed.
3.
Tap the Remote device tab at the top of the screen.
All devices that you can receive media from are displayed.
2.
Tap a device name. Media that you can receive from the
other device is listed.
• Tap an item that you want to stream to your phone.
3. Press
to return to the previous page.
Read the on-screen welcome information and tap Close.
3.
Tap an available on-screen option and follow the prompts.
Choose from: Get, Shop, Search, and Read.
Bonus Apps
Provides the procedures necessary to install the T-Mobile Bonus
Apps Widget that allows you to discover those applications that
are compatible specifically with your phone.
1.
From the Home screen, tap
(Applications) ➔
(Bonus Apps).
Provides access to a built-in HD video game.
From the Home screen, tap
(Applications) ➔
2.
Read the Widget installation and tap OK.
3.
Once installed, locate the Widget on your screen and tap
Launch.
(Asphalt 6).
2.
(Applications) ➔
2.
Asphalt 6
1.
From the Home screen, tap
(Blio).
Tap on a device to share media.
Receiving Media via AllShare
1.
Blio is an eReading application that presents eBooks just like the
printed version, in full color, and with all of the features you’d
want from an eReader.
Follow the on-screen prompts.
4.
Follow the on-screen prompts.
Applications and Development
142
Books
Calculator
Use Google Books to read over 3 million ebooks on the go.
Build your ebooks library in the cloud with Google Books: jump
right into a bestseller or select from nearly 3 million free ebooks.
Personalize the reader to your liking, pick up reading where you
left off on your phone or computer, and settle down with a great
book on your Android phone!
1.
From the Home screen, tap
(Applications) ➔
(Books).
2.
account and your device.
Tap
to begin searching for both free and paid
ebooks.
4.
Follow the on-screen prompts to download the ebook to
your phone.
143
1.
From the Home screen, tap
(Utility) ➔
(Applications) ➔
(Calculator).
2.
Enter the first number using the numeric keys.
3.
Enter the operation for your calculation by tapping the Plus,
If prompted, tap Turn sync on. This synchronizes your
books you have previously selected between your Books
3.
Using this feature you can use the phone as a calculator. The
calculator provides the basic arithmetic functions; addition,
subtraction, multiplication, and division. You can also use this as
a scientific calculator.
Minus, Multiplication, or Division key.
4.
Enter the next number.
5.
To view the result, tap the = (equals) key.
6.
Repeat steps 1 to 4 as many times as required.
Note: Place the screen in Landscape mode to reveal additional scientific
functions.
Calendar
With the Calendar feature, you can consult the calendar by day,
week, or month, create events, and set an alarm to act as a
reminder. Google Calendar is built into the phone and
synchronizes both new and existing entries between your phone
and your online Google account.
Important!: You must have previously added an account (Facebook, Microsoft
Exchange ActiveSync, or Google) prior to using the Calendar.
1.
From the Home screen, tap
(Applications) ➔
• Delete: allows you to delete All events, All events before today, or
an individual event.
• Settings: displays a list of configurable settings.
For more information, refer to “Synchronizing Contacts” on
page 95.
To manually sync calendar events:
1.
Month: displays the Month view.
Week: displays the Week view.
Day: displays the Day view.
List: allows you to search for events for the selected Month, Week,
or Day, or you can look for events for a future date.
2. Press
and select one of the following options:
• Create: creates a new Event.
• Go to: displays a specific date.
• Today: displays the date highlighted with a Blue box highlighting
the date.
• Search: allows you to search within current events.
➔
and then tap
➔ Accounts and
sync.
2.
Locate the email account containing the events you wish to
synchronize.
(Calendar). The Calendar displays four tabs:
•
•
•
•
Press
3.
Tap
within the adjacent account field to reveal the
account’s synchronization settings screen.
4.
Tap Sync Calendar to activate the synchronization of
calendar events between your device and the remote
exchange server. A green checkmark indicates the feature
is enabled.
Contacts
The default storage location for saving phone numbers to your
Contacts List is your phone’s built-in memory.
For more information, refer to “Contacts List” on page 84.
Applications and Development
144
Camera
Downloads
Use your 8.0 megapixel camera feature to produce photos in a JPEG
format. The Camcorder shoots High Definition video in an MP4
format.
Note: An SD card must be inserted before the Camera will take and store
photos.
䊳
From the Home screen, tap
Provides quick access to tabs containing a list of your current
downloaded files (Internet and Other).
1.
From the Home screen, tap
(Applications) ➔
(Downloads).
2.
Tap an available file category tab (Internet downloads or
Other downloads) and select the desired file. Compatible
(Applications) ➔
document formats can be opened by Polaris Office
(Camera).
(page 163).
For more information, refer to “Using the Camera” on page 119.
Email
Clocks
Here you can set an alarm, configure and view the World clock,
use a stopwatch, or set a timer. The applications display in a
tabular format and quickly accessed with the touch of a finger.
䊳 From the Home screen, tap
(Applications) ➔
(Clock).
For more information, refer to “Clock” on page 191.
Email enables you to review and create email using most email
services. The device alerts you when you receive an email
message.
For more information, refer to “Email” on page 108.
Files
Organize and store data, images, and more in your own personal
file folders. Files are stored to the memory card in separate (user
defined) folders.
䊳
From the Home screen, tap
(Applications) ➔
(Files).
For more information, refer to “Files” on page 130.
145
Gallery
Google Search
The Gallery is where you view photos and play back videos. For
photos, you can also perform basic editing tasks, view a
slideshow, set photos as wallpaper or caller image, and share as
a picture message.
䊳
From the Home screen, tap
Google Search is a web-based search engine that uses
text-based queries to search for content on web pages.
䊳
(Applications) ➔
– or –
Tap
For more information, refer to “The Gallery” on page 131.
on the Google Search bar and say the search
information. For more information, refer to “Search Key”
Google Mail
on page 29. For more information, refer to “Using Google
Google Mail (Gmail) is a web-based email service. Gmail is
configured when you first set up your phone. Depending on your
synchronization settings, Gmail can automatically synchronize
with your Gmail account on the web.
From the Home screen, tap
(Applications) ➔
(Google Search) and enter the search text.
(Gallery).
䊳
From the Home screen, tap
(Applications) ➔
(Gmail).
For more information, refer to “Using Google Mail” on page 115.
Search” on page 29.
IM
Instant Messaging allows you to send and receive instant
messages using Windows Live Messenger, Google Talk, or Yahoo!
Messenger communities.
䊳
From the Home screen, tap
(Applications) ➔
(IM).
For more information, refer to “Using Instant Messaging (IM)” on
page 118.
Applications and Development
146
Kies air
Latitude
Kies air allows you to sync your Windows PC wirelessly with your
phone provided they are both on the same Wi-Fi network. You
can view and share call logs, videos, photos, music, bookmarks,
Google Latitude allows you and your friends share locations and
status messages with each other. It also lets you send instant
messages and emails, make phone calls, and get directions to
your friends’ locations.
ringtones, and even send SMS messages from your PC.
䊳
From the Home screen, tap
(Applications) ➔
(Kies air).
Important!: You must sign in to your Google account, enable Wi-Fi, and
enable the Location feature before you can use this application.
For more information, refer to “Wi-Fi settings” on page 194.
For more information, refer to “Kies Air” on page 184.
Note: Although you do not have to enable location services in order to use
Latitude, it is recommended for best accuracy.
1.
From the Home screen, tap
(Applications) ➔
(Latitude).
Important!: For best results, it is recommended that you enable all of your
location services. For more information, refer to “Location and
Security” on page 211.
2.
Tap Wi-Fi Disabled - Click to enable connection to navigate
to the Wi-Fi Settings menu where you can turn on Wi-Fi if it
is not already enabled.
For more information, refer to “Wi-Fi” on page 185.
147
Sharing your Location with Friends
1.
From the Latitude map screen, tap
Latitude Options
to display your
䊳
From the map display, press
to display the following
Latitude friends. At first, only your name is displayed.
options:
2.
Press
3.
Tap Select from Contacts or Add via email address.
4.
Tap a contact or enter an email address, then tap
• Search: allows you to search for a place of interest.
• Directions: displays navigation directions to a location from a
starting point.
• My Places: allows you to see locations you have marked as a
favorite such as restaurants, museums, parks, and so forth. Press
and hold on a location and when the screen displays with the
address, tap the star in the upper-right corner. It will be listed in your
Starred Places.
• Clear Map: allows you to remove all markings and layers from the
map.
• Latitude: lets you and your friends share locations and status
messages with each other. It also lets you send instant messages
and emails, make phone calls, and get directions to your friends’
locations.
• More: allows you to select the following additional options:
– Labs: this is a testing ground for experimental features that aren’t ready
for primetime. They may change, break or disappear at any time. Click
on a Lab to enable or disable it.
– Cache Settings: allows you to set options to pre-fetch map tiles when
not using Wi-Fi and to clear the cache that holds the map tiles.
– Help: displays the Google Mobile Help web page where you can receive
help on Google Maps.
➔ Add friends.
Add friends.
5.
Tap Yes at the Send sharing requests prompt.
Your friend will receive an email or text message with your
location marked on a map. They will also receive
instructions on how to view your location from the web or
use Latitude on their phone or tablet provided it is
available. Once they acknowledge your request, their
location will display on your tablet. They can share their
location from their computer, phone, or tablet. For more
information, go to http://www.google.com/latitude.
6.
To view the map, press
➔ See map.
Applications and Development
148
– Terms, Privacy & Notices: displays the Terms and Conditions, Privacy
Policy, o r Legal Notices information. Select the desired information from
the pop-up menu.
– About: displays general information about Google maps such as
Version, Platform, Locale, Total data sent, Total data received, Free
memory, etc.
5.
desired, tap the Enable Backup field to activate the feature.
6.
Tap Next.
7.
Read the on-screen information about the feature that can
help locate your missing phone and if desired, tap
Lookout
Lookout™ provides mobile device-specific security features that
are coupled with a minimal performance hit. Lookout Mobile
Security provides key security options that are unique to the
mobile market. Along with the antivirus and anti-malware tech,
there's a lost and stolen phone locator service, an application
privacy adviser, and a backup service.
1.
From the Home screen, tap
(Applications) ➔
(Lookout).
2.
Read the on-screen descriptions and tap Get started to
begin your configuration.
3.
Read the on-screen information about Security and if
desired, tap the Enable Security field to activate the
feature.
4.
Read the on-screen information about Backup and if
New user (to setup a new account) or Existing user (to log
into your account field to activate the feature).
8.
Tap Start Lookout.
From the main application, the main features are presented as
buttons. Tap one to reveal a button that will run the feature.
Maps
Google Maps allow you to track your current location, view
real-time traffic issues, and view detailed destination directions.
There is also a search tool included to help you locate places of
interest or a specific address. You can view locations on a vector
or aerial map, or you can view locations at the street level.
Important!: Before using Google Maps you must have an active data (3G/4G)
or Wi-Fi connection. The Maps application does not cover every
country or city.
Tap Next.
䊳
From the Home screen, tap
(Maps).
149
(Applications) ➔
Important!: For best results, it is recommended that you enable all of your
location services. For more information, refer to “Location and
Security” on page 211.
Enabling a Location source
Before you use Google Maps and find your location or search for
places of interest, you must enable a location source. To enable
the location source you must enable the wireless network, or
enable the GPS satellites.
Important!: The more location determining functions are enabled, the more
accurate the determination will be of your position.
1.
Press
➔
and then tap
(Settings) ➔
Location and security.
2.
Tap Use wireless networks to enable GPS to determine
location based on nearby cell towers.
3.
Tap Use GPS satellites to enable the GPS satellite.
4.
Tap Use sensor aiding to enhance positioning and save
power using sensors.
Tip: When using Google Maps you can turn on Enable GPS satellites.
Selecting GPS satellites allows you to locate places of interest at the
street-level. However, this also requires a clear view of the sky and uses
more battery power.
Opening Maps
1.
From the Home screen, tap
(Applications) ➔
(Maps).
2.
Locate the top row of the applications to access additional
options:
• Search Maps: allows you to search for a place of interest.
• Places: provides access to the places menu where you can quickly
locate a business or person, find out more information about a
business, see coupons, public responses, and more (page 162).
Locate and tap one of the listed places (Restaurants, Coffee, Bars,
Attractions, ATMs, Gas Stations, Explore Nearby, or Add your own
place.) A list of places within this category displays.
• Layers: allows you to switch map views:
– Traffic: (available only in selected areas) Real-time traffic conditions are
displayed over roads as color-coded lines. Each color represents how
fast the traffic is moving.
– Satellite: Maps uses the same satellite data as Google Earth. Satellite
images are not real-time. Google Earth acquires the best imagery
available, most of which is approximately one to three years old.
Applications and Development
150
– Terrain: combines a topographical view of the area’s terrain with the
current map location.
– Transit Lines: displays the overlapping transit lines on your map.
– Latitude: allows you to see your friend's locations and share your
location with them.
– My Maps: displays a list of your preferred maps.
– Bicycling: displays the overlapping cycling trails on your map.
– Wikipedia: displays any Wikipedia markers and info on your map.
– Buzz: allows you post public messages and photos at a location for
everyone to see.
• My Location: when touched, the location displays on the map with
a blinking blue dot.
3. Press
and select one of the following options:
• Search: allows you to search for a place of interest.
• Directions: displays navigation directions to a location from a
starting point.
• My Places: marks favorite locations on the map. These items are
automatically synchronized with maps.
• Clear Map: after viewing or following directions, this option resets
the map.
• Latitude: lets you and your friends share locations and status
messages with each other. It also lets you send instant messages
and emails, make phone calls, and get directions to your friends’
locations.
151
• More:
– Labs: a testing ground for experimental features that are not ready to
use publically.
– Cache Settings: provides the ability to setup maps that are cached into
the phone’s memory (while not on a Wi-Fi connection) or to clear the
cache of map titles.
– Help: uses the browser to display a searchable Google Mobile Help
screen.
– Terms, Privacy & Notices: displays the Terms and Conditions, Privacy
Policy, or Legal Notices information. Select the desired information from
the pop-up menu.
– About: displays general information about Google maps such as
Version, Platform, Locale, Total data sent, Total data received, Free
memory, etc.
Market
Android Market provides access to downloadable applications
and games to install on your phone. Android Market also allows
you to provide feedback and comments about an application, or
flag an application that might be incompatible with your phone.
Accessing the Market
1.
From the Home screen, tap
(Applications) ➔
(Market).
2.
If not already logged in with your Google account, tap Next.
3.
Tap Sign in and enter your Google account information.
4.
Tap Accept to agree to the Android Market terms of
service.
For more information, refer to “Downloading a New Google
Application” on page 152.
Downloading a New Google Application
To download a new application, you will need to use your Google
account to sign in to Android Market. The Android Market home
page provides several ways to find applications. The home page
features applications and includes a list of item applications by
category, a list of games, a link to search, and a link to My apps.
1.
From the Home screen, tap
Important!: If the selected application requires access to data or control of a
function on your phone, Market displays the information the
application will access.
Tap OK if you agree to the conditions of the application. Once you
tap OK on this screen you are responsible for using this
application on the phone and the amount of data it uses. Use this
feature with caution.
4.
Note: Use caution with applications which request access to any personal
data, functions, or significant amounts of data usage times.
5.
6.
3.
Check the progress of the current download by opening
the Notifications panel.
7.
(Applications) ➔
Browse through the categories, find an application you're
If prompted, follow the on-screen instructions to pay for
the application.
After the item is downloaded and installed on your phone,
the content download icon
(Market).
2.
Tap Install.
appears in the
notification area of the status bar.
8.
On the Android Market screen, press
and then tap
interested in, and tap the name.
My apps, tap the installed application in the list, and then
Read the application descriptions.
tap Open.
Applications and Development
152
Tip: The newly downloaded applications display in the applications list and
are shown in alphabetical order if the View Type is set to Alphabetical
grid or Alphabetical list, or at the end of the list if View type is set to
Customizable grid.
Unknown sources
This feature can be used for Android application development.
The feature allows developers to install non-Market applications.
1.
2.
Tap the newly installed application. This application is
(Applications).
typically located on the last Applications page.
Android Development
This device can be used for Android application development.
You can write applications in the SDK and install them on this
device, then run the applications using the hardware, system,
and network.
Warning!: Android Dev Phones are not intended for non-developer
end-users. Because the device can be configured with system
software not provided by or supported by Google or any other
company, end-users operate these devices at their own risk.
153
and then tap
(Settings) ➔
Unknown sources displays a check mark to indicate it is
active.
Launching an Installed Google Application
From the Home screen, tap
➔
Applications ➔ Unknown sources.
Note: A data plan is required to use this feature. Charges may apply. Please
contact your service provider for further details.
1.
Press
Manage applications
This feature allows you to manage and remove installed
applications. You can also view the amount of memory or
resources used as well as the remaining memory and resources
for each of the applications on your phone and clear the data,
cache, or defaults.
䊳
Press
➔
and then tap
(Settings) ➔
Applications ➔ Manage applications.
Clearing application cache and data
1.
Press
➔
and then tap
(Settings) ➔
Applications ➔ Manage applications.
2.
Tap an application in which to clear the cache or data.
3.
Tap Force stop, Clear data, Clear cache, or Clear defaults.
Uninstalling third-party applications
You can uninstall any application you downloaded and installed
from Android Market.
1.
Press
and then tap
➔
(Settings) ➔
Applications ➔ Manage applications.
2.
Tap the third-party application, and from the Application
info screen, tap Uninstall.
Media Hub
䊳
From the Home screen, tap
(Applications) ➔
(Media Hub).
For more information, refer to “Media Hub” on page 134.
Memo
This feature allows you to create a memo.
1.
From the Home screen, tap
(Utility) ➔
2.
(Applications) ➔
(Memo).
Tap Create memo.
Note: If this is your first memo, you are automatically taken to the new memo
screen.
3.
Compose the memo.
4.
Tap Save.
For more information, refer to “Text Input Methods” on page 72.
Memo options
1.
While viewing the list of Memos, press
and select
one of the following options:
•
•
•
•
Create: allows you to create a memo.
Delete: allows you to delete one or more memos.
Search: allows you to search within the current set of memos.
Send: allows you to send one or several of your memos at one
time. Select a memo and tap send to deliver it via: Bluetooth, Email,
Messaging, or Wi-Fi.
• Sort by: allows you to sort by Date or Color.
• More: provides the following options:
– SNS log in: allows you to log into your Facebook, Twitter, or LinkedIn
accounts.
– Sync memo: allows you to sync your memos Google Docs or send
individual memos.
– PIN lock: allows you to set a PIN lock so that a PIN must be entered
before reading a memo.
Applications and Development
154
2.
Touch and hold the memo then select Send and choose
the method to send this memo: Bluetooth, Email,
Messaging or Wi-Fi.
3.
From the memo list, touch the upper-left edit button and
select a color for the memo’s background, then tap Save.
Mini Diary
This application allows you to create a mini diary where you can
add a photo, and text to describe an event or other memorable
life event.
1.
(Utility) ➔
Messaging
You can also use the Multi Media Service (MMS) to create
multimedia messages to send and receive from other mobile
phones.
From the Home screen, tap
(Applications) ➔
(Mini Diary). Any diary entries display in a
list.
This application allows you to use the Short Message Service
(SMS) to send and receive short text messages to and from other
mobile phones.
䊳
From the Home screen, tap
(Applications) ➔
(Messaging).
For more information, refer to “Messages” on page 102.
2.
If prompted, tap Yes to allow required network
connectivity.
3.
Tap the Tap to add photo field to add a photo for this diary
event and touch the source. Selections are: Camera, or
Gallery.
4.
Tap the Add location area of the screen, enter text, then tap
Done.
5.
Tap the Tap to add text area of the screen and enter text
then tap Done.
6.
Tap the weather data icon in the upper, right corner (above
the photo) and select a weather condition from the list to
describe the weather conditions for this entry.
7.
155
Tap Save.
Mini Diary settings
1.
From the Home screen, tap
(Applications) ➔
(Mini Diary).
(Utility) ➔
2.
• Change photo: replaces the photo in this entry by allowing you to
take another photo or use another image.
• Delete photo: deletes the photo from this entry when you touch Yes
to confirm.
• More: provides additional options such as: Publish (SNS service
such as Facebook) and Send via (to deliver the entry via either Email
or Messaging).
From the main Diary listings page, press
and then
tap Settings.
3.
Tap Auto update if you want the settings to automatically
update.
Deleting a Mini Diary entry
1.
From the Home screen, tap
(Utility) ➔
2.
Press
(Applications) ➔
and then tap Delete all.
More for Me
Provides customized offers, discounts and deals right to your
phone by providing some brief customer and location
information. The application uses your current location to bring
you the best deals in your area.
Initial Setup
1.
Mini Diary options
1.
(Applications) ➔
2.
Select a diary.
3.
Press
(Applications) ➔
(More for Me).
From the Home screen, tap
(Utility) ➔
From the Home screen, tap
2.
Read the on-screen information and configure the
necessary options such as: Gender, Age, and agreements.
3.
Tap Continue to complete the setup process.
and select one of the following options:
• Create: creates a new diary entry.
• Delete: deletes the displayed entry.
• Edit: allows you to edit the current diary entry.
Applications and Development
156
Using the More for Me Application
1.
From the Home screen, tap
My Account
(Applications) ➔
(More for Me).
2.
Access an available tab for more options:
• Just for Me: displays a listing of current offers available
within your current area.
• All Deals: Provides you with common categories to choose from,
such as: Food & Drinks, Health & Beauty, Retail & Service,
Activities, Events, Other, and All nearby.
• My Deals: displays a list of previously redeemed offers.
• Settings: Provides access to configuration settings such as: Get
Better Deals, Connect with Facebook, and Terms & Conditions.
Music
This application allows you to play music files that you have
stored on your microSD card. You can also create playlists.
䊳
From the Home screen, tap
(Applications) ➔
This option provides you with account specific information such
as your current activity, billing information, and Plan Services
information. You can also set alerts for minute or message usage,
payment reminder, or power saver.
Note: You may be prompted to log into the Android Market to receive the
latest version of the T-Mobile My Account application.
The differences between My Account and My Device are these:
• My Account: check Activity, set Alerts and Events, review Billing,
and review your current Plan and services.
• My Device: Personalize settings, Quick Tools, Support, and Storage
& Battery.
Tip: Use the Menu key to toggle between My Account and My Device.
1.
(Applications) ➔
(My Account).
(Music).
For more information, refer to “Music” on page 136.
From the Home screen, tap
2.
Read the on-screen information and tap OK.
The initial screen displays four tabs: Activity, Set Alerts, Billing,
and Plan.
157
Activity
The Activity tab displays your current minute and message
activity. You can view what percentage of minutes were used as
well as the number of messages used for a particular start date.
Alerts and Events
From this screen you can activate alerts to notify you of the
following:
• Alert Settings: sets when you would receive alerts for the following:
– Minute Usage: tracks the number of minutes used and remaining in
your plan. Minute Usage Reminder: sends an alert when the number of
minutes used reaches 75 percent of the total available minutes in the
plan. Over Limit Alert: sends an alert when usage exceeds your plan’s
total available minutes.
– Message Usage: tracks the number of messages used and remaining
in your plan. If you plan includes unlimited messages this setting does
not apply.
– Data Usage: tracks data used and remaining in your plan. If you plan
includes unlimited data usage this setting does not apply.
– Payment Reminder: alerts when your bill is due.
– Power Saver: sends an alert when the battery level reaches 30
percent. The alert displays in the notification window. This alert is
automatically set to On.
• Recent Oder Status: Displays details about your recent orders.
• Account Events: provides details about your recent account
events.
Billing
This provides a billing summary.
Plan
This screen displays specific information and charges for your
current plan and services. The screen also displays additional
services information and charges. Included categories include:
My plan & services, Additional Services, and T-Mobile Offers.
My Device
Use the My Device application to configure device settings, view
support information, personalize your CallerTunes, Ringtones, or
Wallpapers, or view battery storage information.
1.
From the Home screen, tap
(Applications) ➔
(My Device).
2.
Read the on-screen information and tap OK.
Tip: Use the Menu key (
) to toggle between My Account and My Device.
The differences between My Account and My Device are these:
• My Account: check Activity, set Alerts and Events, review Billing,
and review your current Plan and services.
• My Device: Personalize settings, Quick Tools, Support, and Storage
& Battery.
Applications and Development
158
The initial screen displays four tabs: Personalize, Quick Tools,
Support, and Storage Battery.
Personalize
Using this menu you can personalize CallerTunes, Ringtone, and
Wallpapers.
• CallerTunes: allows you to choose songs for your callers to hear.
• Ringtones: you can personalize your phone’s ringtones by
choosing from recordings, voices, and more.
• Wallpapers: you can personalize your phone’s background by
selecting wallpapers from the Shop, Gallery, Live Wallpapers, and
the Wallpaper Gallery.
Quick Tools
Quick Tools is a shortcut that allows you to view and configure
the following features and parameters: Wi-Fi, Bluetooth, Data
Roaming, GPS, Brightness, Screen Timeout, and Phone Info.
Support
Displays support information My Account Feedback, T-Mobile
Forums, T-Mobile on Twitter, and T-Mobile® Tech Assist™.
Storage & Battery
From this tab you can view Memory storage information for the
phone or memory card. You can also view the battery level
percentage and other information.
159
Navigation
Google Maps Navigation (Beta) is an internet-connected
turn-by-turn, GPS navigation system with voice guidance.
Caution!: Traffic data is not real-time and directions may be wrong,
dangerous, prohibited, or involve ferries.
Important!: To receive better GPS signals, avoid using your device in the
following conditions:
- inside a building or between buildings
- in a tunnel or underground passage
- in poor weather
- around high-voltage or electromagnetic fields
- in a vehicle with tinted windows
䊳
From the Home screen, tap
(Applications) ➔
(Navigation).
Enabling GPS Location
1.
Press
➔
and then tap
(Settings) ➔
Location and security
2.
Tap Use wireless networks. A green check mark indicates
the GPS location feature has been enhanced by using Wi-Fi
and/or mobile networks to increase accuracy.
3.
Tap Use GPS satellites. A green check mark indicates the
GPS location feature is enabled.
4.
Tap Use sensor aiding. A green check mark indicates the
phone is enhancing its positioning ability and save power
by using sensors.
Navigation options
1.
From the Home screen, tap
➔
(Navigation).
The navigation application can be configured from the
main screen.
2.
Read the on-screen disclaimer and tap Accept.
3.
Choose from the following on-screen options:
• Driving/Walking: configures the method of travel. Selection of
Walking would negate the need to track traffic jams and
obstructions.
– Driving mode enables the Settings feature: allows you to configure
your Route options such as: Avoid highways or Avoid tolls.
• Maps: enables the on-screen real-time map functionality.
• Speak Destination: allows you to use the voice recognition feature
to search for matching locations in your area.
• Type Destination: allows you to manually enter a destination
address (via the on-screen keypad).
• Contacts: allows you to receive turn-by-turn directions to the
address stored for a selected Contacts entry.
• Starred Places: allows you to obtain directions to locations that
have been starred within Google maps (maps.google.com).
Navigation Map options
Once on the map screen, you can access the following features:
• Destination: returns you to the previous Navigation options screen.
• Search by voice: Speak your destination instead of typing.
• Layers: allows you to switch map views:
• Traffic view: (available only in selected areas) Real-time traffic
conditions are displayed over roads as color-coded lines. Each color
represents how fast the traffic is moving.
• Satellite: Maps uses the same satellite data as Google Earth.
Satellite images are not real-time. Google Earth acquires the best
imagery available, most of which is approximately one to three
years old.
• Parking: displays parking information relative to your current
location.
• Gas Stations: displays gas station location relative to your current
location.
• ATMs & Banks: displays ATM and Bank locations relative to your
current location.
• Restaurants: displays restaurant and eatery locations relative to
your current location.
Applications and Development
160
Press
to access additional options:
• Search: manually search for a destination address, place, name of
business, or even a type of business.
• Set Destination: returns you to the navigation options screen where
you can access a destination by either Speaking, Typing, or selecting
from a Contacts entry or Starred Place.
• Layers: allows you to switch map views. See previous description.
• Mute: allows you to mute the audio readout and directional
information.
• Exit Navigation: terminates the application.
• More: provides additional application information such as: Help and
Terms, Privacy & Notices.
Caution!: Navigation is a beta product. Use caution.
Netflix is a service offering online streaming service that allows
you to watch TV Shows & Movies directly on your phone.
From the Home screen, tap
(Applications) ➔
(Netflix). If prompted to update, follow the on-screen
prompts.
2.
Enter the Email and Password associated with your current
Netflix account.
161
Follow the on-screen prompts to use the application.
Note: It is recommended that this service be used in conjunction with an
active Wi-Fi connection.
News & Weather
The News & Weather application allows you to view the news
and weather in your area.
1.
From the Home screen, tap
(Applications) ➔
(News & Weather).
2.
Select from any of the available tabs: Weather, Top Stories,
U.S., Sports, and Entertainment.
3.
Tap the temperature to display a graph mapping the days
temperature and humidity.
Netflix
1.
3.
4.
While on the Weather screen, press
to display the
following options:
• Refresh: allows you to refresh the screen. Your location and the
weather is updated if there have been any changes.
• Settings: allows you to set weather, news, and refresh settings.
– Weather settings: allows you to choose location(s) and set the metric
for temperature displays.
– News settings: allows you to choose topics, configure settings for
fetching articles and images, and view the terms of service for news
service.
– Refresh settings: allows you to choose options for updating content.
– Application version: displays the application version number.
To access the settings:
Places
Google Places displays company logos on a layer of Google
Maps. When viewing an area you can quickly locate a business
or person, find out more information about the business, see
coupons, public responses, and more.
1.
1.
Press
and then tap Settings.
2.
Tap an available option: Weather settings, News settings,
2.
Use the Find places field to manually enter a desired place
or choose from among the various categories. Matches are
Photo Editor
filtered by those closest to your current location.
This application provides basic editing functions for pictures that
you take on your phone. Along with basic image tuning like
brightness, contrast, and color it also provides a wide variety of
effects used for editing the picture.
From the Home screen, tap
(Applications) ➔
(Places).
Refresh settings, and Application version.
䊳
From the Home screen, tap
3.
Locate and tap one of the listed places (Restaurants,
Coffee, Bars, Attractions, ATMs, Gas Stations, Explore
Nearby, or Add your own place.) A list of places within this
category displays.
(Applications) ➔
– or –
(Photo editor).
Press
For more information, refer to “Photo Editor” on page 129.
4.
and then tap either Starred Places or My Maps.
Tap the Maps icon (upper-right) to launch the related maps
feature.
Applications and Development
162
5.
and then tap Latitude. The functions of this
Press
application are similar to those of the Navigation
application, but work along with the Latitude service
where you can share your location with your chosen
Google friends.
Polaris Office
Polaris Office Mobile for Android is a Microsoft Office compatible
office suite. This application provides a central place for
managing your documents online or offline.
The application can also open Adobe PDF (Portable Document
Format) files.
1.
From the Home screen, tap
(Applications) ➔
(Polaris Office).
2.
Read the registration information and enter your Name and
Email information (if desired).
3.
Tap Later to ignore this registration or Register to complete
the process.
4.
Read the End User License Agreement, then tap Accept if
you agree with the terms of use.
163
5.
On its initial launch, tap an available tab:
• New: creates a new office document.
• My Files: This is where you keep your documents on this device.
You can manage documents, or send them to others, and upload
the documents.
• Recent docs: provides a list of recently opened documents.
• Web files: This provides your online storage information at Box.net.
You can also share your documents to others without using email
attachments.
• Search: allows you to search for document files by using a text
string.
Pro Apps
Slacker
Provides access to compatible productivity tools. These
productivity packs can be accessed from anywhere.
Slacker offers free, internet radio for mobile phones.
1.
From the Home screen, tap
(Applications) ➔
(Pro Apps).
Important!: You must register and create a free account prior to using this
service.
2.
• Select an application and follow the on-screen download
and installation instructions.
Tap Create Account if you have not created an account.
This icon navigates to the sound and phone settings for your
phone. It includes such settings as: display, security, memory,
and any extra settings associated with your phone.
From the Home screen, tap
(Applications) ➔
(Settings).
– or –
Press
If prompted, enter your Email address and password.
– or –
Settings
䊳
(Applications) ➔
(Slacker).
Note: Access to these applications and packs requires you have an active
Google account and are logged in prior to connection.
1.
From the Home screen, tap
➔
and then tap
(Settings).
3.
Begin selecting the music you want to listen to.
Social Hub
Allows you to easily and intuitively satisfy all of your
communication needs from within a single-user interface.
E-mails, instant messaging, social network contents, and
calendar contents from all major service providers are available.
1.
From the Home screen, tap
(Applications) ➔
(Social Hub). The Welcome to Social Hub page
For more information, refer to “Changing Your Settings” on
page 194.
describes all of the available features.
2.
Tap Setup now to setup your Social Hub account.
Applications and Development
164
3.
Tap on an account type that you would like to setup.
4.
Tap OK to complete the activation process.
Choose from either email accounts, SNS accounts, or other
5.
Review the on-screen options such as:
IM accounts.
4.
•
•
•
•
•
•
If you choose an SNS account, read the SNS disclaimer,
tap the I accept all the terms above checkbox, then tap
Agree to continue.
5.
Tap Next.
6.
Follow the on-screen instructions for adding an account.
7.
From the Social Hub main screen, tap the Feeds or
Messages tabs to see information pertaining to your
8.
To add another account, press
(Applications) ➔
(T-Mobile Mall).
2.
Read the on-screen disclaimer and tap I agree.
3.
Read the legal disclaimer screen and tap Yes to agree or
No to disagree to its terms.
165
From the Home screen, tap
(Applications) ➔
(T-Mobile Name ID).
2.
This downloadable application provides access to several phone
features and tunes.
From the Home screen, tap
Allows you to modify the on-screen Caller ID information. Name
ID identifies unknown callers by Name, City, and State.
➔ Add account.
T-Mobile Mall
1.
T-Mobile Name ID
1.
account.
Recommended
Song recommendations
Ringtones
CallerTunes
Applications
Games
Choose an on-screen option.
T-Mobile TV
T-Mobile TV is an application that allows you to get live TV and
Video on Demand.
䊳
From the Home screen, tap
(Applications) ➔
(T-Mobile TV).
For more information, refer to “T-Mobile TV” on page 139.
Tags
Task
This application is used for organizing and sharing Near Field
Communication (NFC) tags. You can scan a tag by turning on your
device and placing it near the tag. For more information, refer to
“Near Field Communication” on page 199.
1.
From the Home screen, tap
(Applications) ➔
(Tags).
2.
Read the on-screen tutorial screen and follow the
Allows you to keep track of both your current and upcoming
tasks. You can also sync these tasks with different accounts.
1.
(Utility) ➔
䊳
From the Home screen, tap
3.
Tap the Name field and enter a task name using the
keypad.
due date checkbox.
5.
If desired, enter Task, Priority, Reminder, and Notes then
tap Save.
You can instant message with Google Talk. Google Talk allows
you to communicate with other people who are also connected
with Google Talk on the phone or on the web.
䊳
Tap the Due date field and enter a due date name using the
keypad. If there is no date that the task is due, tap the No
(Applications) ➔
Talk
(Task).
Tap Create task to start a new task entry.
4.
(Settings) ➔ Wireless and network ➔ NFC.
(Applications) ➔
2.
navigation instructions.
Turning on the NFC feature:
From the Home screen, tap
From the Home screen, tap
(Applications) ➔
(Talk).
For more information, refer to “Google Talk” on page 117.
6.
At the Task list screen, press
to display the following
options:
• Create: allows you to create a new task.
• Delete: allows you to delete one or all of your tasks.
• Search: allows you to search your tasks for a particular word or
words.
Applications and Development
166
• List by: allows you to sort by Due date, Status, or Priority.
• Sync Task: allows you to sync your tasks to any of your accounts.
From the Task list screen, tap a task once you have completed it
and a checkmark appears next to the task. The task name is also
grayed out so that you can still read it.
Task Manager
Sometimes your phone might seem to slow down over time, and the
biggest reason for this are background applications. These are
applications that were not properly closed or shutdown and are still
active but minimized. The Task Manager not only lets you see which
of these applications are still active in the background but also easily
lets you choose which applications are left running and which are
closed.
Shutting Down Applications
䊳
From the Home screen, tap
(Applications) ➔
(Task Manager).
• Downloaded displays any installed packages or applications from
the Market that are taking up memory space. Tap Uninstall to
remove them from your phone.
• RAM, displays the amount of current RAM (Random Access
Memory) currently being used and allow you to Clear memory.
• Storage displays a visual graph indicating the available and used
space within the System storage location, USB storage, SD card
location and Battery monitor.
• Help provides additional battery saving techniques.
7. From the Active applications tab, tap Exit to close selected
applications or tap Exit all to close all background running
applications.
TeleNav GPS
TeleNav GPS Navigator is a driving aid that uses both audible and
visual directions for GPS navigation.
1.
then tap Task Manager. This screen
contains the following tabs:
• Active applications display those currently active applications
running on your phone.
167
(Applications) ➔
(TeleNav GPS).
– or –
Press and hold
From the Home screen, tap
2.
If prompted, read the GPS Settings notification, tap GPS
Settings button and follow the on-screen prompts to
enable the necessary GPS location feature.
3.
Read the agreement and tap Accept to accept the terms, or
• Videos: For more information, refer to “Videos” on page 169.
• Voice command: For more information, refer to “Voice
Command” on page 170.
• Voice recorder: For more information, refer to “Voice Recorder”
on page 170.
tap Exit to close the window. Wait for the application to
load required first-time use files.
4.
Select to either Upgrade to Premium the application or use
the Use Basic Navigation.
5.
Video Chat
Use the available on-screen functions.
Utility
This application houses some of the most commonly used utility
applications such as: Calculator, Memo, Minidiary, Task, Videos,
and Voice Recorder.
1.
From the Home screen, tap
(Applications) ➔
This is a mobile video sharing and 2-way video calling service.
This application also lets you record and share experiences with
your friends, family, and your favorite social networks.
1.
Tap an available application to begin its use.
3.
Refer to the particular application’s instructions for more
information:
• Calculator: For more information, refer to “Calculator” on
page 143.
• Memo: For more information, refer to “Memo” on page 154.
• Mini diary: For more information, refer to “Mini Diary” on
page 155.
• Task: For more information, refer to “Task” on page 166.
(Applications) ➔
(Video Chat) ➔ Sign up.
2.
Fill in the Email address, Username, and Password, then
tap Sign up to create your new account.
(Utility).
2.
From the Home screen, tap
3.
Follow the on-screen instructions. For more information,
visit: http://qik.com/.
To adjust application settings:
1.
Press
and then tap Settings.
2.
Choose from any of the following options:
• Sharing allows you to setup sharing preferences.
– Facebook: set up your Qik credentials for Facebook posting of videos.
– Twitter: set up your Twitter account sharing preferences.
Applications and Development
168
– YouTube: set up your Qik credentials for YouTube posting of videos.
– People: set up your contact sharing parameters.
• Privacy allows you to select who can find you and see your videos.
• M2M Settings allows you to configure the Mobile to Mobile video
chat settings.
• Location allows you to select the level of location accuracy that is
embedded into your Qik videos. When posting or sharing Qik video
information with others, you can decide how accurate the related
location information can be. Choose from: Off, City level, Street
level, or Track live.
• Video encoding quality allows you to assign a video quality to the
outbound video. Choose from: Low, Normal, or High.
• About displays the version information for the Qik Video Chat
application.
Recording a Video Chat
1.
From the Home screen, tap
(Applications) ➔
(Video Chat).
2.
Tap Record & Share.
3.
Read the one-time disclaimer describing the public nature
of your videos and tap OK.
4.
Tap Record to start recording.
– or –
Tap Stop to end the recording process.
169
5.
Enter a title for your video segment and select those
services you wish to use to distribute your video.
• Services such as Twitter, Facebook, YouTube, SMS, and E-mail ask
that you select a recipient for your video segment.
Videos
The Video Player application plays video files stored on your
microSD card.
䊳
From the Home screen, tap
(Utility) ➔
(Applications) ➔
(Videos).
For more information, refer to “Using the Video Player” on
page 132.
Visual Voicemail
Visual Voicemail enables users to view a list of people who left a
voicemail message, and listen to the any message they want
without being limited to chronological order.
䊳
From the Home screen, tap
(Applications) ➔
(Visual Voicemail).
For more information, refer to “Visual Voicemail” on page 17.
Voice Command
Voice Search
This application can use your voice to perform operations that
you would normally have to do by hand such as dialing a phone
number, texting a message, playing music, etc.
䊳
From the Home screen, tap
(Utility) ➔
(Applications) ➔
(Voice command).
For more information, refer to “Using Voice Command” on
page 58.
Voice Recorder
The Voice Search feature is a voice-activated application that
allows you to tell the phone what to search for and then the
phone activates a Google search based on what you said.
For more information, refer to “Using Additional Voice Search
Functions” on page 30.
1.
2.
From the Home screen, tap
(Utility) ➔
Google searches for the information and displays related
Tap Record icon to record an audio file.
3.
Tap Stop to stop recording. The file automatically saves to
the Voice list.
From the Recorded files page, press
information in the browser.
Voice Talk
2.
4.
Tap Speak now and then speak your search command
slowly and clearly.
(Applications) ➔
(Voice Recorder).
(Applications) ➔
(Voice Search).
The Voice Recorder allows you to record an audio file up to one
minute long and then immediately send it as a message.
1.
From the Home screen, tap
and then tap
Share and select a method in which to share this audio file.
Selections are: Messaging, Wi-Fi, Bluetooth, Gmail, or
Email. Refer to each specific section, depending on the
Launches your phone’s built-in voice recognition system that
allows you to initiate several common tasks without having to
touch the phone. Features include: Call, Text, Navigate, Play
music, Memo, and Driving mode.
䊳
From the Home screen, tap
(Applications) ➔
(Voice Talk).
For more information, refer to “Using Voice Talk” on page 59.
method you selected to send this voice recording.
Applications and Development
170
Web
To configure YouTube Settings:
Open the browser to start surfing the web. The browser is fully
optimized and comes with advanced functionality to enhance the
Internet browsing feature on your phone.
䊳
From the Home screen, tap
(Applications) ➔
(Web).
For more information, refer to “Web” on page 173.
YouTube
YouTube is a video sharing website on which users can upload
and share videos, and view them in MPEG-4 format.
1.
From the Home screen, tap
(Applications) ➔
(YouTube).
2.
When the screen loads you can begin searching and
viewing posted videos.
171
䊳
Press
and then tap Settings and configure the
following parameters:
• High quality on mobile, when enabled, allows you to start all
videos in high quality mode while you are connected to a mobile
network.
• Caption font size allows you to set the font size used by on-screen
captions. Choose from: Small, Medium, Large, or Extra Large.
• Clear search history allows you to clear any previous YouTube
searches from appearing within the search box.
• SafeSearch filtering allows you to configure block settings for
videos containing restricted content. This option blocks these
videos from appearing within your search results. Choose from:
Don’t filter, Moderate, or Strict blocking.
• Help provides answers to most YouTube questions.
• Feedback allows you to provide user feedback to YouTube.
• Google Mobile Terms of Service
• YouTube Terms of Service
• Google Mobile Privacy Policy
• YouTube Privacy Policy
• Application version displays the software version for the current
YouTube application.
To watch a high quality video:
䊳
Press
and then tap Settings ➔ High quality on mobile.
Zinio Reader
Launches a digital magazine reader. Zinio has transformed your
favorite print magazines into digital format.
1.
From the Home screen, tap
(Applications) ➔
(Zinio Reader).
2.
Tap sign in if you already have an account or tap create an
account to continue.
3.
Follow the on-screen prompts.
Applications and Development
172
Section 10: Connections
Your phone is equipped with features that allow you to quickly
connect to the web.
Web
Your phone is equipped with a Google browser to navigate the
mobile web. This section explains how to navigate the browser
and use the basic features.
Accessing the Internet
To access the Browser:
䊳
From the Home screen, tap
(Applications) ➔
(Web).
Note: You must disable your Wi-Fi connection if you wish to view the web2go
home page (http://home.web2go.com/).
Homepage
When you access the Browser, the web2go home page displays
the following topics:
• Google Search: allows you to quickly search for online topics using
the Google search engine.
• Yahoo Top news stories: provides an on-screen display of today’s top
news and entertainment stories.
173
• Hot Trends: provides an on-screen list of today’s hot trends on movies,
music, etc..
• Quick Links: provides an on-screen list of Web sites and services.
• Beat the Traffic: allows you to view local traffic conditions, Maps,
Routes, and Incidents.
• Cheap Gas: provides an on-screen listing of the nearest gas
stations and their current gas prices.
• T-Mobile Mall: allows you to download the T-Mobile Mall website.
• Yahoo Mail: displays the Sign in for Yahoo Mail. Register by
sending a text message with the word START to 92500 if you are
not already registered.
• Facebook: displays the Facebook Log in. Sign up from this page if
you are not already registered.
• ESPN: displays current sports news headlines and more.
• E! Online: displays current entertainment news headlines and
more.
• Mapquest: provides access to the online mapquest site.
• Yelp: provides access to Yelp which is an online urban city guide
that helps people find cool places to eat, shop, drink, relax and play.
Its the fun and easy way to find, review and talk about what's great
in your world.
• What’s Now: provides quick access to a variety of different
entertainment and shopping websites.
• More Sites: provides access to additional Web sites.
• Feeds: provides an on-screen list of weather feeds for selected cities.
• Directory: provides access to additional directory service from: What’s
New, Email/IM, Facebook Social/Chat, Cnn News, Weather, and
Entertainment.
Note: If the Automatic brightness feature is enabled (Settings ➔ Display ➔
Brightness), you can not modify the browser’s brightness setting.
• Refresh: reloads the current page.
• Forward: forwards the browser to another web page.
• More: displays the following additional options:
– Add bookmark: allows you to add a URL to your bookmark list.
– Add shortcut to Home: adds a shortcut to your web2go homepage on
your phone’s Home screen.
– Find on page: allows you to search in the current page.
– Page info: displays information about the selected page.
– Share page: allows you to share the page using Gmail or as a
message.
– Downloads: displays the download history.
– Settings: allows you to change the way you view your web pages by
changing these options. See “Browser Settings” on page 177.
– Print: provides print access on compatible Samsung printers.
Navigating with the Browser
1.
To select an item, tap an entry.
2.
To scroll through a website, sweep the screen with your
finger in an up or down motion.
3.
To return to the previous page, press
Browser Options
1.
From the home page, press
to access the following
options:
• New window: displays a new window so you can browse multiple
URLs. For more information, refer to “Adding and Deleting
Windows” on page 175.
• Windows: displays a list of the windows you have open.
• Browser brightness: allows you to manually adjust the screen
brightness.
Entering a URL
You can access a website quickly by entering the URL. Websites
are optimized for viewing on your phone.
To enter a URL and go to a particular website:
䊳
From the homepage tap the URL field at the top of the
screen, enter the URL and tap
Connections
174
Note: This is not the same application as the Google Search Widget. The
web2go screen can not be accessed via a Wi-Fi connection.
Search the Internet
Note: This icon will display a number that corresponds to the current number
of active browser windows,
4.
windows and tap an entry to launch the selected Internet
To perform an internet search using keywords:
1.
screen keypad.
2.
Tap
3.
Tap a link to view the website.
. A list of search results displays.
You can have up to eight Internet windows open at one time. To
add a new window, follow these steps:
From your browser, press
and then tap Windows ➔ New window.
A new browser window displays.
3.
Press
175
1.
next to the listing to delete the window.
and then tap Windows to see a list of all open
From the webpage, tap
. The Bookmarks page
displays. Additional pages include Most visited and History.
2.
2.
windows.
Tap
While navigating a website, you can bookmark a site to quickly
and easily access it at a future time. The URLs (website
addresses) of the bookmarked sites display in the Bookmarks
page. From the Bookmarks page you can also view your Most
visited websites and view your History.
and then tap New window.
– or –
Press
5.
Using Bookmarks
Adding and Deleting Windows
1.
window.
From within the Google search application, tap the Google
search field, enter the keyword(s) to search using the on-
Scroll across the screen to view the currently active
Press
to display the following options:
• Bookmark last-viewed page: Creates a new bookmark for the
last webpage that you viewed.
• List/Thumbnail view: Select Thumbnail view (default) to view a
thumbnail of the webpage with the name listed, or select List view
to view a list of the bookmarks with Name and URL listed.
• Create folder: Creates a new folder in which to store new
bookmarks.
• Change order: Rearranges the current bookmarks.
• Move to folder: Selected bookmarks are moved to a selected
folder.
• Delete: Erases selected bookmarks.
3. Tap a bookmark to view the webpage, or touch and hold a
Adding Bookmarks
➔ Add.
1.
From the Home webpage, tap
2.
Use the on-screen keypad to enter the name of the
bookmark and the URL.
bookmark for the following options:
3.
Assign a folder location. Home is the default.
• Open: Opens the webpage of the selected bookmark.
• Open in new window: Opens the webpage in a new window.
• Edit bookmark: Allows you to edit the name or URL of the
bookmark. For more information, refer to “Editing Bookmarks”
on page 176.
• Add shortcut to Home: Adds a shortcut to the bookmarked
webpage to your phone’s Home screen.
• Share link: Allows you to share a URL address via Bluetooth, Email,
Gmail, Messaging, My tag, or Wi-Fi.
• Copy link URL: Allows you to copy the URL address to use in a
message.
• Delete bookmark: Allows you to delete a bookmark. For more
information, refer to “Deleting Bookmarks” on page 176.
• Set as homepage: Sets the bookmark to your new homepage.
4.
Tap OK. The new save page now appears on the
Bookmarks page.
Editing Bookmarks
1.
From the Bookmarks page, touch and hold the bookmark
you want to edit.
2.
Tap Edit bookmark.
3.
Use the on-screen keypad to edit the name of the
bookmark or the URL.
4.
Tap OK.
Deleting Bookmarks
1.
From the Bookmarks page, touch and hold the bookmark
you want to delete.
2.
Tap Delete bookmark.
3.
At the confirmation window, tap OK.
Connections
176
Emptying the Cookies
Using Most Visited
A cookie is a small file placed on your phone by a website during
navigation. In addition to containing some site-specific
information, a cookie can also contain some personal information
(such as a username and password) which might pose a security
risk if not properly managed. You can clear these cookies from
your phone at any time.
1.
From the Home webpage, press
The Most visited list provides you with a list of the most visited
and bookmarked websites. These entries are used to return to
previously unmarked web pages.
1.
The most frequently visited web pages display at the top of
and then tap
Tap OK to delete the cookies or tap Cancel to exit.
the list.
The History list displays a list of the most recently viewed
websites. These entries can be used to return to previously
unmarked web pages.
From the Home webpage, tap
➔ History tab.
A list of the most recently viewed websites displays.
2.
Tap an entry to display the webpage.
– or –
Press
History list.
177
2.
Tap any entry to display the selected webpage.
Browser Settings
Using Web History
1.
➔ Most visited tab.
A list of your most frequently visited webpages displays.
More ➔ Settings ➔ Clear all cookie data.
2.
From the Home webpage, tap
and then tap Clear history to delete the current
To configure browser settings:
1.
From the Home screen, tap
(Applications) ➔
(Web).
2.
Press
and then tap More ➔ Settings.
3.
Choose from the following on-screen options:
• Default zoom: Adjusts the zoom feature. Set to Far, Medium, or
Close.
• Open pages in overview: Displays an overview of recently viewed
web pages.
• Text encoding: Adjusts the current text encoding.
• Block pop-up windows: Prevents popup advertisement or
windows from appearing on-screen. Remove the checkmark to
disable this function.
• Load images: Allows web page images to load along with the other
text components of a loaded website.
• Auto-fit pages: Allows web pages to be resized to fit as much of
the screen as possible.
• Landscape view only: Displays the browser in only the horizontal
position.
• Enable JavaScript: Enables javascript for the current Web page.
Without this feature, some pages may not display properly. Remove
the checkmark to disable this function.
• Enable plug-ins: Allows the download of plug-ins such as Adobe
Flash.
• Open in background: New pages are launched in a separate page
and displayed behind the current one. Remove the checkmark to
disable this function.
• Set home page: Sets the current home page for the Web browser.
• Default storage: Sets the default storage to Memory card.
• Clear cache: Deletes all currently cached data. Tap OK to complete
the process.
• Clear history: Clears the browser navigation history. Tap OK to
complete the process.
• Accept cookies: Allows sites, that require cookies, to save and
read cookies from your device.
• Clear all cookie data: Deletes all current browser cookie files.
• Remember form data: Allows the device to store data from any
previously filled out forms. Remove the checkmark to disable this
function.
• Clear form data: Deletes any stored data from previously filled out
forms. Tap OK to complete the process.
• Enable location: Allows websites to request access to your
location.
• Clear location access: Clears location access for all websites. Tap
OK to complete the process.
• Remember passwords: Stores usernames and passwords for
visited sites. Remove the checkmark to disable this function.
• Clear passwords: Deletes any previously stored usernames or
passwords. Tap OK to complete the process.
• Show security warnings: Notifies you if there is a security issue
with the current website. Remove the checkmark to disable this
function.
• Select search engine: Allows you to choose a default search
engine for your phone. Choose from: Google, Yahoo!, or Bing.
• Website settings: View advanced settings for individual websites.
• Reset to default: Clears all browser data and resets all settings to
default.
Connections
178
Bluetooth Status Indicators
Bluetooth
About Bluetooth
Bluetooth is a short-range communications technology that
allows you to connect wirelessly to a number of Bluetooth
devices, such as headsets and hands-free car kits, and
Bluetooth-enabled handhelds, computers, printers, and wireless
devices. The Bluetooth communication range is usually up to
approximately 30 feet.
To turn Bluetooth on:
Press
➔
and then tap
(Settings) ➔
Wireless and network ➔ Bluetooth settings.
2.
Tap the Bluetooth field to activate the feature (checkmark
indicates active). When active,
displays in the
Status area.
Press
➔
Displays when Bluetooth is connected (paired) and
communicating.
The Bluetooth settings menu allows you to set up many of the
characteristics of your device’s Bluetooth service, including:
• Entering or changing the name your device uses for Bluetooth
communication and description
• Setting your device’s visibility (or “discoverability”) for other Bluetooth
devices
• Displaying your device’s Bluetooth address
To access the Bluetooth Settings menu:
To turn Bluetooth off:
1.
Displays when Bluetooth is active.
Bluetooth Settings
Turning Bluetooth On and Off
1.
The following icons show your Bluetooth connection status
at a glance:
and then tap
(Settings) ➔
1.
Tap the Bluetooth field to deactivate the feature.
➔
and then tap
2.
Verify Bluetooth is active. Indicated by a green check mark
in the Bluetooth field.
179
(Settings) ➔
Wireless and network ➔ Bluetooth settings.
Wireless and network ➔ Bluetooth settings.
2.
Press
3.
Tap the Device name, Visible, Visible time-out, and Search
2.
search for visible external Bluetooth-compatible devices
for devices fields to set the options.
such as headsets, devices, printers, and computers.
To change your Bluetooth name:
1.
Verify Bluetooth is active.
2.
From the Bluetooth settings page, tap Device name.
3.
Enter a new name.
4.
Tap OK to complete the rename process.
To set visibility:
1.
Verify your Bluetooth is active.
2.
From the Bluetooth settings page, tap Visible.
Making your device visible allows other devices to pair and
communicate.
Note: Your device visibility is based on the time set within the Visible timeout field (2 Minutes, 5 Minutes, 1 Hour, or Never). This value appears
as a countdown within this Visible time-out field.
From the Bluetooth settings page, tap Scan for devices to
Pairing Bluetooth Devices
The Bluetooth pairing process allows you to establish trusted
connections between your device and another Bluetooth device.
When you pair devices, they share a passkey, allowing for fast,
secure connections while bypassing the discovery and
authentication process.
Note: Pairing between two Bluetooth devices is a one-time process. Once
pairing is established the devices continue to recognize their
partnership and exchange information without entering a passcode.
To pair your device with another Bluetooth device:
1.
Verify Bluetooth is active.
2.
From the Bluetooth settings page, tap Visible.
Your device must be visible to successfully pair with an
external device.
To scan for Bluetooth devices:
1.
Verify Bluetooth is active.
3.
Tap Scan for devices. Your device displays a list of
discovered in-range Bluetooth devices.
4.
Tap a device from the list to initiate pairing.
Connections
180
5.
Enter the passkey or PIN code, if needed, and tap OK.
From the Bluetooth settings page, touch and hold the
6.
The external device must accept the connection and enter
name of the previously paired device, and select
your device’s PIN code.
Disconnect.
Once successfully paired to an external device,
displays in the Status area.
Note: Due to different specifications and features of other Bluetoothcompatible devices, display and operations may be different, and
functions such as transfer or exchange may not be possible with all
Bluetooth-compatible devices.
Disconnecting a Paired Bluetooth Device
Disconnecting a paired device breaks the connection between
the device and your phone, but retains the knowledge of the
pairing. At a later point when you wish to reconnect the device,
there is no need to setup the connection information again.
1.
Verify your Bluetooth is active.
2.
From the Bluetooth settings page, tap the previously paired
device (from the bottom of the page).
3.
Tap OK to confirm disconnection.
– or –
181
Note: Disconnections are manually done but often occur automatically if the
paired device goes out of range of your phone or it is powered off.
Deleting a Paired Bluetooth Device
Deleting a device from your list removes its “connection record”
and upon reconnection would require that you re-enter all the
previous pairing information.
1.
Verify Bluetooth is active.
2.
From the Bluetooth settings page, touch and hold the
name of the previously paired device (from the bottom of
the page). This opens the connected device’s menu
options.
3.
Tap Unpair to delete the paired device.
Sending Contacts via Bluetooth
Depending on your paired devices’ settings and capabilities, you
may be able to send pictures, Contact information, or other items
using a Bluetooth connection.
Note: Prior to using this feature, Bluetooth must first be enabled on both your
phone and the external device, and the recipient’s device must be
visible.
1.
Verify your Bluetooth is active and your phone is visible.
2.
From the Home screen, tap
3.
Touch and hold the entry from the list to display the on-
(Contacts).
Enable Downloading for Web Applications
Important!: Before you can download a web application you must insert an
SD into the phone and enable the Unknown sources feature
(enables downloading). For more information, refer to “Installing
the microSD Memory Card” on page 9. Also, see “Mounting the
SD Card” on page 52.
1.
➔
and then tap
(Settings) ➔
Applications.
screen context menu.
4.
Press
Tap Send namecard via ➔ Bluetooth and select a paired
2.
Tap the Unknown sources check box.
external Bluetooth device.
3.
Tap OK to allow install of non-Market applications.
Tap again to remove the checkmark and disable the
Note: The external Bluetooth device must be visible and communicating for
the pairing to be successful.
5.
A Bluetooth share notification displays in your notifications
list.
installation of non-market applications.
Warning!: Not all web applications are safe to download. In order to protect
your phone and data, use Android Market to install web
applications. For more information, refer to “Downloading a New
Google Application” on page 152.
Connections
182
PC Connections
You can connect your device to a PC using an optional PC data
cable using various USB connection modes. Mass storage is the
default connection method.
Mass storage: allows you to use the onboard storage capacity of the
phone to store and upload files. This option allows your computer to
detect the phone as a removable storage drive.
Note: To use any downloaded market application that requires a USB
connection between your phone and your PC, you should first set the
USB setting to Mass storage.
2.
Connect the USB cable to the phone and connect the cable
to the computer.
3.
Tap Connect USB storage. Both the phone and computer
display icons to show that the device is mounted. As soon
Kies air: allows you to sync your Windows PC wirelessly with your
phone provided they are both on the same Wi-Fi network.
as the connection is established a drive letter is assigned
to the phone’s storage device.
Connecting as a Mass Storage Device
You can connect your device to a PC as a removable disk and
access the file directory. If you insert a memory card in the
device, you can also access the files directory from the memory
card by using the device as a memory card reader.
A pop-up window displays on the PC when connected.
4.
Open the folder to view files.
5.
Copy files from the PC to the memory card.
Prior to using Kies air for Phone Update
Note: The file directory of the memory card displays as a removable disk,
separate from the internal memory.
1.
Press
➔
and then tap
(Settings) ➔
Wireless and network ➔ USB utilities ➔ Connect storage to
PC.
Before using Kies air to upgrade your device, it is recommended
that you backup your personal data prior to use.
To export a Contact list to your microSD card:
1.
From the Home screen, tap
2.
Press
3.
Tap Export to SD card ➔ OK. For more information, refer to
and then tap Import/Export.
“Export/Import” on page 98.
183
(Contacts).
Verify your images and videos are on your microSD card:
1.
From the Home screen, tap
(Applications) ➔
(Gallery).
2.
Verify the Gallery contains all of your pictures and videos.
3.
Remove the back cover and remove the internal microSD
Kies Air
Kies Air allows you to sync your Windows PC wirelessly with your
phone provided they are both on the same Wi-Fi network. You
can view and share call logs, videos, photos, music, bookmarks,
ringtones, and even send SMS messages from your PC.
Tip: Before beginning, it is recommended that you update the Java
application running on your machine.
card prior to initiating a Kies air update.
Enabling USB Debugging
USB debugging must be enabled before being able to use the
Development feature.
1.
Press
➔
and then tap
(Settings) ➔
1.
from your PC.
2.
3.
From the Home screen, tap
(Applications) ➔
(Kies air).
Applications ➔ Development.
2.
Sign onto the same Wi-Fi network from your phone and
Tap the USB debugging field to verify the feature is active
3.
From the Kies air homescreen, tap Start.
before connecting your USB cable.
4.
If prompted, select a network. Choose from either Wi-Fi or
Portable Wi-Fi hotspot.
Using an optional PC data cable, connect the multifunction
jack on your device to a PC.
5.
Write down the on-screen URL address.
Important!: Both your phone and your computer must be connected to the
same Wireless Access Point (WAP).
6.
From your computer, enter the URL in your Web browser.
Connections
184
7.
If prompted, an Access Request prompt is displayed on
your device. Tap Allow to permit connection between the
computer and device.
8.
9.
then close out the Web browser on your computer.
On your computer, you may be prompted to run a Java
plugin for a TransferManagerApplet. Click Run.
Wi-Fi
Tap the Remember for today checkbox if you will be using
About Wi-Fi
Kies air with the same PC later.
10. From your PC, a security warning may be displayed asking
if you want to run this application. Click Run to continue.
11. On your PC, the Kies air screen is displayed. On your
phone, the
icon appears at the top of your screen.
12. Follow the on-screen instructions to view and share
information between your phone and PC.
13. Click a link from the left navigation pane to access one of
several device file categories such as:
•
•
•
•
•
185
• File Explorer
• Language settings
14. To exit the Kies air application, tap Stop on your device,
[Device Name] - provides an overview of all the main categories.
Photos/Videos/Music
Ringtones
Bookmarks
Messages/Call Log/Contacts
Wi-Fi (short for "wireless fidelity") is a term used for certain
types of Wireless Local Area Networks (WLAN). Wi-Fi
communication requires access to an existing and accessible
Wireless Access Point (WAP). These WAPs can either be Open
(unsecured) as within most Hot Spots, or Secured (requiring
knowledge of the Router name and password).
Note: After you complete a connection to an active Wi-Fi network, the Wi-Fi
Calling feature will automatically be enabled.
Activating Wi-Fi
By default, your device’s Wi-Fi feature is turned off (deactivated).
Activating Wi-Fi allows your device to discover and connect to
compatible in-range WAPs (Wireless Access Points).
1.
Press
➔
and then tap
Wireless and network ➔ Wi-Fi settings.
(Settings) ➔
2.
Tap Wi-Fi to activate the feature. A checkmark indicates
Manually Add a New Network Connection
that Wi-Fi is active. The device scans for available in-range
1.
Tap Add Wi-Fi network.
wireless networks and displays them under Wi-Fi networks
2.
Enter the Network SSID (the name of your Wireless Access
on the same screen.
Point).
Connecting to a Wi-Fi Network
1.
Press
➔
and then tap
3.
(Settings) ➔
must match the current security setting on your target
Wireless and network ➔ Wi-Fi settings.
WAP.
The network names and security settings (Open network or
4.
Enter your WAP’s password if the WAP is secure.
Secured with WEP) of detected Wi-Fi networks display in
5.
Tap Save to store the new information and connect to the
the Wi-Fi networks section.
2.
Tap the Security field and select a security option. This
target WAP.
Tap the network you wish to connect to.
Note: When you select an open network you are automatically connected.
3.
Enter a wireless password (if necessary).
4.
Tap Connect.
Note: No prompt to enter the WAP key displays if this is the second time to
connect to a previously accessed or secured wireless network. The
WAP key is required when the device is reset using factory default
settings.
This device is capable of operating in 802.11a mode. For 802.11a devices operating in the frequency range of 5.15
~ 5.25 GHz, they are restricted for indoor operations to reduce any potential harmful interference for Mobile Satellite
Services(MSS) in the US. WIFI Access Points that are capable of allowing your device to operate in 802.11a mode
(5.15 ~ 5.25 GHz band) are optimized for indoor use only. If your WIFI network is capable of operating in this mode,
please restrict your WIFI use indoors not to violate Federal Regulations to protect Mobile Satellite Services
Connections
186
Displays when Wi-Fi is configured for a direct
connection to another compatible device in the same
direct communication mode.
Deactivating Wi-Fi
1.
Press
➔
and then tap
(Settings) ➔
Wireless and network ➔ Wi-Fi settings.
2.
Tap the Wi-Fi field to deactivate the feature. The
checkmark grays.
– or –
Activate and Deactiavte Wi-Fi from the Notification bar.
Note: Use of wireless data connections such as Wi-Fi and Bluetooth can
reduce battery life and use times.
Wi-Fi Advanced Settings
The Wi-Fi settings - Advanced menu allows you to set up many of
the device’s Wi-Fi services, including:
• Setting the Wi-Fi sleep policy
• Viewing the device’s MAC Address
• Configuring use of either a DHCP or Static IP
To access the Wi-Fi Advanced Settings menu:
1.
Manually Scan for a Wi-Fi Network
1.
Press
➔
and then tap
Press
(Settings) ➔
and then tap Scan.
Wi-Fi Status Indicators
The following icons indicate the Wi-Fi connection status:
Displays when Wi-Fi is connected, active, and
communicating with a Wireless Access Point (WAP).
Displays when Wi-Fi is active and there is an available
open wireless network.
187
➔
and then tap
(Settings) ➔
Wireless and network ➔ Wi-Fi settings.
Wireless and networks ➔ Wi-Fi settings.
2.
Press
2.
Press
and then tap Advanced.
Tethering
This option allows you to share your phone’s mobile data
connection via a direct USB connection between your phone and
computer. A wireless version of this same functionality would be
the Mobile AP feature.
Note: You can not mount your phone’s microSD card to your computer while
using the USB tethering feature. If additional software or USB drivers
are required, navigate to: http://www.samsung.com/us/support/
downloads.
1.
Press
➔
and then tap
(Settings) ➔
Wireless and network ➔ Tethering and portable hotspot.
2.
Plug in the USB cable between your computer and your
2.
Tap USB tethering from the Tethering menu to remove the
check mark and deactivate the feature.
3.
Remove the USB cable from the phone.
Portable Wi-Fi Hotspot
This feature allows you to turn your phone into a Wi-Fi hotspot.
The feature works best when used in conjunction with HSPA+
(4G) data services (although 3G service can also be used).
phone.
3.
When prompted for a USB mode, press
to exit the
menu.
4.
Important!: The Mobile AP service can not be active at the same time as
Wi-Fi. Please close your Wi-Fi connection prior to launching the
Mobile AP service.
Tap USB tethering from the Tethering menu. This places a
green check mark next to the entry and activates the
feature. A Tethering or Hotspot active notification briefly
appears on the screen.
Look for the Tethering active icon
Note: You must have a tethering plan on your account to use the Wi-Fi
hotspot. You can not use data on the device while it is being used as a
hotspot.
To activate the Portable Wi-Fi Hotspot service:
in the Status bar
1.
area of the screen.
Press
➔
➔
and then tap
(Settings) ➔
Wireless and network ➔ Tethering and portable hotspot.
To disconnect tethering:
1.
Press
and then tap
(Settings) ➔
2.
Tap Portable Wi-Fi hotspot settings ➔ OK.
3.
Tap Portable Wi-Fi hotspot. This places a checkmark in the
Wireless and network ➔ Tethering and portable hotspot.
adjacent field to activate the service.
4.
Tap Yes to continue with the activation.
Connections
188
5.
Tap Configure portable Wi-Fi hotspot.
6.
Create a new Network SSID name and then write it down.
7.
Confirm the Mobile AP service icon
3.
appears at the
Select this Hotspot and follow your on-screen instructions
to complete the connection.
4.
Launch your Web browser to confirm you have an Internet
connection.
top of the screen.
To secure the Portable Hotspot service:
Note: By default, the connection is open and not secured. It is recommended
that you access the Portable Wi-Fi Hotspot settings and create a
secure connection by using a password for communication.
Note: Using your 4G service and Portable Wi-Fi Hotspot drains your phone’s
battery at a much faster rate than when using any other feature
combination.
The best way to keep using the phone as a hotspot is to have it
connected to a power supply.
The two most common methods for securing your connection to
the Hotspot are to a security method (WPA2 PSK) and to Hide
your phone’s SSID name.
1.
Press
➔
and then tap
(Settings) ➔
Wireless and network ➔ Tethering and portable hotspot ➔
Portable Wi-Fi hotspot settings ➔ Configure portable Wi-Fi
hotspot.
To connect to the Hotspot:
1.
Enable Wi-Fi (wireless) functionality on your target device
(laptop, media device, etc.).
2.
Tap the Security field and select WPA2 PSK.
3.
With security enabled, enter a new password into the
Password field.
Scan for Wi-Fi networks from the device and select your
phone hotspot from the network list.
• The SSID name for your phone’s hotspot is determined by what you
entered into the Network SSID field.
• You can change the name by tapping Configure portable Wi-Fi
hotspot ➔ Network SSID and changing the entry.
189
2.
Important!: The more complex the password, the harder it will be for
intruders to break your security. It is recommended that you not
use names, birthdays, or other personal information.
4.
Tap Save to store the new settings.
Section 11: Time Management
This section describes how you can manage time using timerelated applications such as the Calendar, Alarm Clock, Analog or
Digital clock, and the World clock.
Calendar
With the Calendar feature, you can consult the calendar by day,
week, or month, create events, and set an alarm to act as a
reminder.
1.
From the Home screen, tap
(Applications) ➔
(Calendar). The Calendar displays four tabs:
•
•
•
•
Month: displays the Month view.
Week: displays the Week view.
Day: displays the Day view.
List: allows you to search for events for the selected Month, Week,
or Day, or you can look for events for a future date.
2. Press
and select one of the following options:
• Create: creates a new Event.
• Go to: displays a specific date.
• Today: displays the date highlighted with a Blue box highlighting
the date.
• Search: allows you to search within your current events.
• Delete: allows you to delete All events, All events before today, or
an individual event.
• Settings: displays a list of configurable settings.
Creating a Calendar Event
1.
From the Home screen, tap
(Applications) ➔
(Calendar).
2.
From the Month tab, press
➔ Create.
Calendar Settings
Using the Calendar settings you can select the day with which
you want the calendar to begin. You also select how you want to
view the calendar, by Month, Week, or Day or determine how to
manage events, notifications, sounds, and defaults reminders.
1.
From the Home screen, tap
2.
Press
3.
Tap Calendars and select the calendar categories you want
(Applications) ➔
➔ Settings.
to display or tap All calendar. A check mark indicates
selection.
4.
Tap Default view and select a view: Month, Week, Day, or
List.
Time Management
190
5.
Tap Day views and select a type: Time grid, or Event list.
6.
Tap First day of week and select either Sunday or Monday.
7.
Tap Hide declined events to activate this option. A check
mark indicates selection.
8.
This feature allows you to create an alarm to ring at a specified
time, track time in other parts of the world, use a stopwatch, or
set a timer.
䊳
Tap Lock time zone (to lock event time based on your
current user-selected time zone). Select a time zone from
10. Tap Set alerts & notifications to adjust the event notification
method. Choose from: Alert, Status bar notification, and
Setting an Alarm
1.
notification.
13. Tap Calendar sync and select the type of general
synchronization settings you want. A check mark indicates
selection.
(Applications) ➔
2.
Tap
3.
Use the plus or minus symbols to enter the hour, and
(Create alarm).
minutes, then tap AM or PM (toggles depending on which
was last selected).
11. Tap Vibration to activate this notification option. Selections
12. Tap Select ringtone to assign a ringtone to a calendar event
From the Home screen, tap
(Clock).
Off.
are: Always, Only in Silent mode, or Never.
(Applications) ➔
(Clock).
within the Select time zone field.
191
From the Home screen, tap
Tap Hide contacts’ anniversaries to activate this option. A
check mark indicates selection.
9.
Clock
4.
Tap the Alarm repeat field and touch the number of times
you want this alarm to repeat. Selections are: One-time
event, Daily, Every weekday(Mon-Fri), or Weekly. If you
selected Weekly, a button row displays. Tap each day of
the week in which you want this alarm to repeat, then tap
Save.
5.
6.
Tap the Alarm type field and select one of the following:
Tap the field to assign a duration time (3 min, 5 min, 10
Melody, Vibration, Vibration and melody, or Briefing.
min, 15 min, or 30 min) and nature tone (Morning, Breeze,
Slide the slider bar left or right in the Alarm volume field to
Mist, Forest, Light, or Rain).
Sounds, or Go to My files. Locate a sound to use as an
• Smart alarm Duration category describes the length of time the
alarm will remain silent between alarm notifications (snooze time).
• Smart alarm Tone category provides one of several nature sounds
that are used as the alarm tone.
10. Tap the Name field and enter a name for this Alarm.
alarm ringtone then tap OK to activate the ringtone.
11. Tap Save to store the new alarm event.
decrease or increase the alarm volume. A sample of the
volume level plays.
7.
8.
Tap the Alarm tone field and select one of the following:
Tap the radio button to activate a tone for the Snooze. Tap
the field to assign a duration time (3 min, 5 min, 10 min,
Turning Off an Alarm
䊳
15 min, or 30 min) and snooze repetition (1 time, 2 times,
3 times, 5 times, and 10 times).
• Duration indicates the length of time the alarm will remain silent
between alarm notifications (snooze time).
• Snooze repeat indicates the numbers of snooze sessions that are
assigned to this alarm. How many times will the snooze silence the
alarm.
9. Tap the radio button to activate Smart alarm which slowly
To stop an alarm when it sounds, touch and slide
to
the right.
Setting the Snooze Feature
䊳
To activate the Snooze feature after an alarm sounds,
touch and slide
to the left. Snooze must first be set
in the alarm settings.
increases screen brightness and the volume of nature
tones to simulate dawn breaking.
Time Management
192
World Clock
This feature allows you to find out what time it is another part of
world.
1.
From the Home screen, tap
(Applications) ➔
(Clock).
2.
Tap the World clock tab.
3.
Tap
4.
Tap Stop to stop the counter.
5.
Tap Restart to restart the lap counter. You can have
multiple lap times.
6.
Tap Reset to reset the counter.
Setting a Timer
1.
(Add city) then scroll and select the desired city,
or tap in the search field to locate a city.
From the Home screen, tap
(Applications) ➔
(Clock) ➔ Timer tab.
2.
To assign DST settings:
Tap the hr, min, or sec field and use the on-screen keypad
to enter the hour, minute, or seconds. The timer plays an
1.
Locate a desired city from the World Clock list.
2.
Touch and hold a city and select DST settings.
3.
Tap Start to start the timer.
3.
Select a DST setting (Automatic, Off, 1 hour or 2 hours).
4.
Tap Stop to stop the timer or Reset to reset the timer and
alarm at the end of the countdown.
start over.
Stopwatch
This feature allows you to capture elapsed time while letting the
stopwatch keep running.
1.
From the Home screen, tap
(Applications) ➔
(Clock) ➔ Stopwatch tab.
2.
Tap Start to start the stopwatch counter.
3.
Tap Lap to begin the lap time counter.
193
5.
Tap Restart to resume the timer counter.
Configuring a Desk Clock
This feature lets you activate an on-screen clock that can be
viewed when the device is docked.
䊳
From the Home screen, tap
(Clock) ➔ Desk clock tab.
(Applications) ➔
Section 12: Changing Your Settings
This section explains the sound and phone settings for your
device. It includes such settings as: display, security, memory, and
any extra settings associated with your phone.
Wireless and Networks
Important!: When your phone is in Flight mode, it cannot send or receive any
calls or access online information or applications.
➔
and then tap
(Settings) ➔
Wireless and network.
2.
Press
➔
and then tap
(Settings) ➔
Wireless and network ➔ Wi-Fi settings.
Tap Wi-Fi. A check mark displayed indicates Wi-Fi is
active.
Flight mode allows you to use many of your phone’s features,
such as Camera, Games, and more, when you are in an airplane
or in any other area where making or receiving calls or data is
prohibited.
Press
1.
2.
Using Flight mode
1.
Activating Wi-Fi
Tap Flight mode. A check mark displayed next to the
Wi-Fi settings
Once set up for Wi-Fi connectivity, your phone automatically uses
Wi-Fi, when available, for all your mobile phone services.
1.
Press
➔
and then tap
(Settings) ➔
Wireless and network ➔ Wi-Fi settings.
2.
Configure the settings as desired.
The available connection types displayed with a security type
displayed next to them.
feature indicates Flight mode is active.
Changing Your Settings
194
Network Notification
By default, when Wi-Fi is on, you receive notifications in the
Status bar anytime your phone detects an available Wi-Fi
network. You can deactivate this feature if you do not want to
receive notifications.
1.
Press
➔
and then tap
(Settings) ➔
Wireless and network ➔ Wi-Fi settings.
2.
1.
Tap Network notification again to remove the check mark
The WPS (Wi-Fi Protected Setup) button is a standard for easy
and secure wireless network set up and connections. To use
WPS, the connecting device must support WPS and be
compatible with Wi-Fi Protected Access (WPA) security. WPS can
automatically set up a random network name and WPA wireless
security for wireless Wi-Fi phones, routers, access points,
computers, adapters, and other electronic devices.
195
➔
and then tap
(Settings) ➔
2.
Tap WPS button connection.
3.
Press the WPS button on your Wi-Fi access point within 2
minutes.
Manually Adding a Wi-Fi Network
1.
Press
➔
and then tap
(Settings) ➔
Wireless and network ➔ Wi-Fi settings.
and deactivate this feature.
WPS Button Connection
Press
Wireless and network ➔ Wi-Fi settings.
Tap Network notification. A check mark displayed next to
the feature indicates Network notification is active.
3.
WPS allows you to push buttons instead of entering a network
name and wireless security PIN.
2.
Tap Wi-Fi to turn it on.
3.
Tap Add Wi-Fi network.
4.
Enter the SSID (Service Set Identifier) and Security settings
then tap Save.
Note: An SSID is a unique key which identifies a wireless LAN. Its purpose is
to stop other wireless equipment from accessing your LAN — whether
accidentally or intentionally. To communicate, wireless devices must
be configured with the same SSID.
Wi-Fi Direct Settings
5.
You can configure your phone to connect directly with other Wi-Fi
capable devices. This is an easy way to transfer data between
devices. These devices must be enabled for
Wi-Fi direct communication. This connection is direct and not via
a hotspot or WAP.
Note: Activating this feature will disconnect your current Wi-Fi network
connection.
1.
Press
➔
and then tap
(Settings) ➔
Wireless and network ➔ Wi-Fi Direct settings.
2.
status field now reads “Connected” and your connected
device is listed within the Wi-Fi Direct devices listing.
Bluetooth settings
In this menu you can activate Bluetooth, view or assign a device
name, activate your phone so other Bluetooth devices can
discover it, or scan for other, available Bluetooth devices with
which to pair.
Activating Bluetooth
䊳
Press
➔
and then tap
(Settings) ➔
Tap Wi-Fi Direct. A check mark displayed next to the
Wireless and network ➔ Bluetooth settings and tap
feature indicating it is enabled. Your phone will begin to
Bluetooth to turn it on.
search for other devices enabled with Wi-Fi direct
connections.
3.
When prompted to complete the connection, tap OK. The
Note: Bluetooth must be enabled prior to use.
After scan, tap a device name to begin the connection
process to another Wi-Fi Direct compatible device.
Note: The target device must also have Wi-Fi Direct service active and
running before it can be detected by your device.
4.
Tap Connect. The direct connection is then established.
Changing Your Settings
196
Activating the Device Name
1.
Press
➔
and then tap
2.
Tap a device name to pair with the device.
(Settings) ➔
Wireless and network ➔ Bluetooth settings ➔ Device name.
Important!: Some Bluetooth devices are secured and require a PIN number to
confirm and pair with them.
The assigned device name displays.
2.
Press
to erase the current device name and enter a
3.
tap OK.
new name for this device using the keyboard.
3.
USB Utilities
Tap OK to confirm your setting.
1.
Activating Visibility
䊳
Press
➔
and then tap
(Settings) ➔
Wireless and network ➔ Bluetooth settings ➔ Visible.
The phone is now activated for discovery other devices for
a period of time determined by the value set within the
Visible time-out menu.
Scanning for Devices
This option allows you to scan for active Bluetooth devices so you
can pair with them.
1.
Press
➔
and then tap
(Settings) ➔
Wireless and network ➔ Bluetooth settings ➔
Scan for devices. Your phone begins scanning and lists any
discovered devices in the Bluetooth devices section.
197
Enter a PIN to pair with the device, if one is required, and
Press
➔
and then tap
(Settings) ➔ USB
utilities ➔ Connect storage to PC.
2.
If prompted, tap OK to turn USB debugging mode off.
3.
Plug in a compatible USB cable to begin using the device
for mass storage mode.
Tethering
VPN settings
This option allows you to share your phone’s mobile data
connection via a direct USB connection between your phone and
computer. A wireless version of this same functionality would be
the Mobile AP feature.
Note: You can not mount your phone’s microSD card to your computer while
using the USB tethering feature. If additional software or USB drivers
are required, navigate to: http://www.samsung.com/us/support/
downloads.
䊳
Press
➔
and then tap
(Settings) ➔
Wireless and network ➔ Tethering and portable hotspot.
The VPN settings menu allows you to set up and manage Virtual
Private Networks (VPNs).
Important!: Before you can use a VPN you must establish and configure one.
Adding a VPN
Before you add a VPN you must determine which VPN protocol to
use: PPTP (Point-to-Point Tunneling Protocol), L2TP (Layer 2
Tunneling Protocol), L2TP/IPSec PSK (Pre-shared key based
L2TP/IPSec), or L2TP/IPSec CRT (Certificate based L2TP/IPSec).
1.
For more information, refer to “Tethering” on page 187.
Mobile AP
This feature allows you to turn your phone into a Wi-Fi hotspot.
The feature works best when used in conjunction with HSPA+
(4G) data services (although 3G service can also be used).
Important!: The Mobile AP service can not be active at the same time as
Wi-Fi. Please close your Wi-Fi connection prior to launching the
Mobile AP service.
Press
➔
and then tap
(Settings) ➔
Wireless and network ➔ VPN settings.
2.
Tap Add VPN.
To establish a PPTP (Point-to-Point Tunneling Protocol):
1.
Establish a VPN name (a name for this connection).
2.
Set the VPN server.
3.
Enable encryption (if desired).
4.
Set the DNS search domains.
For more information, refer to “Portable Wi-Fi Hotspot” on
page 188.
Changing Your Settings
198
To establish a L2TP (Layer 2 Tunneling Protocol):
1.
Establish a VPN name (a name for this connection).
2.
Set the VPN server.
3.
Enable L2TP secret.
4.
Set L2TP secret.
5.
Set the DNS search domains.
To establish a L2TP/IPSec PSK (Pre-shared key based L2TP/IPSec):
1.
Establish a VPN name (a name for this connection).
2.
Set the VPN server.
3.
Set IPSEc pre-shared key.
4.
Enable L2TP secret.
5.
Set L2TP secret.
6.
Set the DNS search domains.
To establish a L2TP/IPSec CRT (Certificate based L2TP/IPSec):
1.
Establish a VPN name (a name for this connection).
2.
Set the VPN server.
3.
Enable L2TP secret.
4.
Set L2TP secret.
199
5.
Set user certificate.
Note: A user certificate must be installed to use this setting.
6.
Set CA certificate.
Note: A CA certificate must be installed to use this setting.
7.
Set the DNS search domains.
Near Field Communication
This feature is used to read and exchange tags. For more
information, refer to “Tags” on page 166.
1.
Press
➔
and then tap
(Settings) ➔
Wireless and network.
2.
Tap the NFC field. A check mark displayed next to the
feature indicating it is enabled.
Mobile networks
2.
roaming outside your network.
Before you use applications such as Google Maps and find your
location or search for places of interest, you must enable the
Mobile networks options.
䊳
Press
➔
and then tap
Tap Data roaming to connect to data services while
– or –
Tap Data roaming again to remove the green check mark
(Settings) ➔
and deactivate the feature.
Wireless and network ➔ Mobile networks.
Access Point Names
The following options display:
To access a wireless access point:
Use packet data
Allows you to activate data usage on your phone.
䊳
Press
➔
and then tap
䊳
(Settings) ➔
access point displays a bright green, filled circle to the
right of the name.
Data Roaming
Data roaming allows you to connect to your service provider’s
partner networks and access data services when you are out of
your service providers area of coverage.
➔
and then tap
Names. A list of the Access point names display. The active
Use packet data.
Press
➔
Wireless and network ➔ Mobile networks ➔ Access Point
(Settings) ➔
Wireless and network ➔ Mobile networks ➔
1.
Press
and then tap
(Settings) ➔
Wireless and network ➔ Mobile networks.
Network mode
You can configure your phone to either manually detect and use
either a 2G (GSM) or 3G (WCDMA) data network connection.
䊳
Press
➔
and then tap
(Settings) ➔
Wireless and network ➔ Mobile networks ➔ Network
Mode.
Changing Your Settings
200
Using the 4G Network
2.
To confirm you are always using the fastest possible connection,
the phone has an automatic detection method where it finds both
the fastest and most stable connection/communication method.
This phone is capable of using either 4G/3G services for this
connection.
2.
Press
➔
and then tap
indicate that it is active.
Note: Connecting to 2G networks slows the data transfer speed and time.
Using the 3G Network
If you are using applications that require the 3G network speed,
follow these instructions to connect to the 3G network.
Note: WCDMA is only available on the 4G network.
1.
(Settings) ➔
1.
➔
and then tap
(Settings) ➔
Wireless and network ➔ Mobile networks ➔ Network
Mode.
mode.
Tap GSM/WCDMA (auto mode). A check mark displays next
2.
Using the 2G (EDGE) Network
If you are not using applications that require the 3G network
speed (any application that accesses the network or uses a
browser), using the 2G network saves battery life.
Press
➔
and then tap
to indicate that it is active.
Using this feature you can view the current network connection.
You can also scan and select a network operator manually, or set
the network selection to Automatic.
1.
Press
➔
and then tap
(Settings) ➔
Wireless and network ➔ Mobile networks.
(Settings) ➔
Wireless and network ➔ Mobile networks ➔ Network
mode.
Tap WCDMA only. A check mark displays next to this option
Network Operators
mode for this phone.
201
Press
Wireless and network ➔ Mobile networks ➔ Network
to this option to indicate that it is active. This is the default
1.
Tap GSM only. A check mark displays next to this option to
2.
Tap Network operators. The current network connection
displays at the bottom of the list.
Important!: You must deactivate data service prior to searching for an
available network.
3.
Tap Search now to manually search for a network.
4.
Tap Select automatically to automatically select a network
Call Settings
To access the Call settings menu:
䊳
Press
➔
and then tap
(Settings) ➔Call.
– or –
From the Home screen, tap
connection.
➔ Settings ➔ Call.
Configuring General Call Settings
Note: Connecting to 2G networks slows the data transfer speed and time.
Default Setup Options
Your phone default is set to Automatic (to automatically search
for an available network. You can set this option to Manual to
select a network each time you connect.
1.
Press
➔
and then tap
(Settings) ➔
Wireless and network ➔ Mobile networks ➔ Network
operators.
2.
Tap Default setup.
3.
Tap Manual to locate and connect to a network manually.
Configure the general call settings using this option.
1.
From the Home screen, tap
2.
Tap one of the following options:
➔ Settings ➔ Call.
• Call rejection: allows you to manage your rejection mode and
rejection list.
– Auto reject mode: sets the phone to automatically reject incoming
calls or messages.
– Auto reject list: provides access to current rejection entries and
numbers.
• Set reject messages: allows you to manage both existing rejection
messages and create new ones.
– or –
Tap Automatic to allow the device to automatically select a
network.
Changing Your Settings
202
• Call alert: allows you to assign call alert tones and activate call
alerts and vibration.
– Answer vibration: vibrates the phone when the called party answers.
– Call status tones: assigns sounds settings during the call. Choose
from: Call connect tone, Minute minder, and Call end tone.
– Alerts on call: selects whether alarm and message notification is
turned off during a call.
• Call answering/ending: allows you to manage the settings for
answering and ending calls.
– Answering key allows you to press a key to answer the phone.
– Automatic answering, when connected, automatically answers a call
via the headset after a period of time. Selections are: Off, after 1
second, after 2 seconds, after 3 seconds, after 4 seconds, or after
5 seconds.
– Power key ends calls allows you to press the power key to end the
current call.
• Turn on proximity sensor: allows you to turn off the LCD when the
phone is near your face during a call so you do not accidentally tap
a key.
• Call forwarding: configures call forwarding options.
• TTY mode: allows you to configure the TTY settings. For more
information, refer to “TTY Mode” on page 204.
• Hearing aids: allows you to enable/disable hearing aid
compatibility. For more information, refer to “HAC Mode” on
page 204.
203
• Additional settings: allows you to configure additional call settings.
For more information, refer to “Configuring Additional Voice
Call Settings” on page 204.
Configuring Call Forwarding
1.
Press
➔
and then tap
(Settings) ➔
Call ➔ Call Forwarding.
2.
Tap an available option:
• Always forward: incoming calls are re-routed to a secondary
number that you specify.
• Forward when busy: forwards all your calls to voicemail when your
phone is busy.
• Forward when unanswered: automatically forwards to your
voicemail number when the phone is not answered, and otherwise
allows you to enter a voicemail number.
• Forward when unreachable: automatically forwards to your
voicemail number when the phone is not in service, or is turned off.
TTY Mode
HAC Mode
A TTY (also known as a TDD or Text Telephone) is a
telecommunications device that allows people who are deaf,
hard of hearing, or who have speech or language disabilities, to
communicate by telephone.
Your phone is compatible with select TTY devices. Please check
with the manufacturer of your TTY device to ensure that it is
compatible with digital cell phones.
Your phone and TTY device will connect via a special cable that
plugs into your phone’s headset jack. If this cable was not
provided with your TTY device, contact your TTY device
manufacturer to purchase the connector cable.
1.
Press
➔
and then tap
1.
Tap Full TTY to activate the feature, or TTY mode off to
deactivate the feature. Off is the default setting.
Press
➔
and then tap
(Settings) ➔
Call.
2.
Tap the Hearing aids field to activate the feature (green
check mark), or tap it again to deactivate the feature. Off is
the default setting.
Configuring Additional Voice Call Settings
1.
Press
➔
and then tap
(Settings) ➔
Call ➔ Additional settings.
(Settings) ➔
Call ➔ TTY mode.
2.
This menu is used to activate or deactivate Hearing Aid
Compatibility for this device.
2.
Tap one of the following options:
• Caller ID: chooses whether your number is displayed when
someone answers your outgoing call. Choose from: Network
default, Hide number, or Show number.
• Call barring: blocks specific types of calls (All outgoing calls,
International calls, etc..).
• Call waiting: notifies you of an incoming call while you are on
another call.
Changing Your Settings
204
• Auto redial: automatically redial the dialed number if it is unable to
connect or the call is cut off.
• Fixed Dialing Numbers: see description below.
Fixed Dialing Numbers
Fixed Dial Number (FDN), allows you to restrict outgoing calls to a
limited set of phone numbers.
Enabling FDN
1.
Press
➔
and then tap
(Settings) ➔
Changing the PIN2 Code
1.
Press
➔
and then tap
(Settings) ➔
Call ➔ Additional settings ➔ Fixed Dialing Numbers.
2.
Tap Change PIN2.
3.
At the prompt, enter your old PIN2 code.
4.
At the prompt, enter a new PIN2 code.
5.
Confirm your PIN2 code.
Call ➔ Additional settings ➔ Fixed Dialing Numbers.
2.
Tap Enable FDN.
3.
At the prompt, enter your PIN2 code and tap OK.
Important!: Not all SIM cards use a PIN2 code. If your SIM card does not, this
menu does not display.
The PIN2 code is provided by your carrier. Entering an incorrect
PIN2 code could cause the phone to lock. Contact customer
service for assistance.
Important!: Not all SIM cards use a PIN2 code. If your SIM card does not, this
menu does not display.
The PIN2 code is provided by your carrier. Entering the PIN2
incorrectly three times will cause the device to lock. Contact
customer service for assistance.
Managing the FDN List
When this feature is enabled, you can make calls only to phone
numbers stored in the FDN list on the SIM card.
1.
Press
➔
and then tap
(Settings) ➔
Call ➔ Additional settings ➔ Fixed Dialing Numbers.
2.
Tap Enable FDN.
3.
At the prompt, enter your PIN2 code and tap OK.
FDN is enabled.
205
4.
Tap FDN list then press
and then tap Add contact or
edit the contacts that were stored.
Important!: Not all SIM cards use a PIN2 code. If your SIM card does not, this
menu does not display.
The PIN2 code is provided by your carrier. Entering the PIN2
incorrectly three times will cause the device to lock. Contact
customer service for assistance.
Silent mode
Silent mode is convenient when you wish to stop the phone from
making noise, in a theater for example. In Silent Mode the
speaker is muted and the phone only vibrates to notify you of
incoming calls, or other functions that normally have a defined
tone or sound as an alert.
1.
Press
➔
and then tap
(Settings) ➔
Sound.
Voicemail
You can view your voicemail number from this menu.
1.
Press
➔
and then tap
2.
– or –
(Settings) ➔
From the Home screen, press and hold the Lock key until
Call ➔ Voicemail service.
Phone options displays.
2.
Tap My carrier.
3.
Tap Voicemail ➔ Voicemail number to now view your
3.
Setup Phone Vibration
Sound Settings
From this menu you can control the sounds on the phone as well
as configure the display settings.
Press
➔
Tap Silent mode to activate or deactivate this mode (the
current mode displays).
number within the Voicemail number field.
䊳
Tap Silent mode.
and then tap
Sound.
The following options display:
(Settings) ➔
1.
Press
➔
and then tap
(Settings) ➔
Sound.
2.
Tap Vibration and select a vibration mode. Choose from:
Always, Never, Only in silent mode, or Only when not in silent
mode.
Changing Your Settings
206
Note: The Phone vibrate setting is independent of other call sounds settings.
For example, if you have Silent mode enabled along with Phone
vibrate, your phone won’t play a ringtone, but will vibrate for an
incoming call.
3.
Tap a ringtone from the available list. The ringtone briefly
plays when selected.
4.
Tap OK to assign a ringer.
Setting a Notification Ringtone
Note: Use both the Silent mode and enable the Only when not in silent mode
option to guarantee no vibrations or sounds from your phone.
1.
Press
➔
and then tap
(Settings) ➔ Sound
➔ Notification ringtone.
Adjusting the Volume Settings
2.
The Volume menu now provides access to various volume
settings within one on-screen popup menu.
1.
Press
➔
and then tap
(Settings) ➔ Sound
➔ Volume.
2.
Touch and drag the on-screen slider to assign the volume
settings for any of the following volume levels.
• Incoming call, Media, System, or Notification.
3. Tap OK to assign the volume levels.
Press
➔
Sound.
2.
207
Tap Phone ringtone.
and then tap
Audible Tone Settings
The Audible touch tones and Audible selection options are used
when you use the dialing pad or making a screen selection. Each
time you press a key or make a selection the selected tone
sounds.
1.
Press
➔
and then tap
(Settings) ➔
Sound.
2.
Tap Audible touch tones or Audible selection. A check mark
displayed next to these features indicates active status.
Setup the Voice Call Ringtone
1.
Tap one of the ringtones and tap OK.
(Settings) ➔
Screen Lock Sounds
Display Settings
The screen lock sounds option is used to activate/deactivate
sounds when locking and unlocking the screen.
1.
Press
➔
and then tap
(Settings) ➔
Sound.
2.
Tap Screen lock sounds. A check mark displayed next to
In this menu, you can change various settings for the display
such as the font, orientation, pop-up notifications, puzzle lock
feature, animation, brightness, screen timeout, and power saving
mode.
Adjusting the Screen Display
1.
these features indicates active status.
Press
➔
and then tap
(Settings) ➔
Display.
Haptic Feedback and Vibration Intensity
Instead of sounding a tone, the Haptic feedback option vibrates
when you press soft keys on certain screens. You can also set the
intensity of the vibration using the Vibration intensity setting.
1.
Press
➔
and then tap
(Settings) ➔
Sound.
2.
Tap Haptic feedback. A check mark displayed next to the
feature indicates Haptic feedback
is active.
3.
Tap Vibration intensity then touch and drag the slider to
adjust the vibration intensity, then tap OK.
2.
Configure the following screen display settings:
• Screen display
– Font style: sets the fonts used on the LCD display. Selections are:
Default font or Get fonts online. Tap Get fonts online to download
additional fonts.
– Home screen Wallpaper: assigns an image from either the Gallery,
Live wallpapers, or Wallpaper gallery to the Home screen.
– Lock screen Wallpaper: assigns an image from either the
Wallpaper gallery or Gallery to the Lock screen.
– Lock screen Clock position: assigns the on-screen clock position
to either the top, MIddle or Bottom of the screen.
– Lock screen Event notifications: assigns what type of on-screen
notification you are prompted with. Choose from either: New
messages or New emails.
Changing Your Settings
208
• Brightness: adjusts the on-screen brightness level. For more
information, refer to “Adjusting Screen Brightness” on
page 209.
• Auto-rotate screen: when enabled, the phone automatically
switches from portrait to landscape orientation and vice versa.
When this setting is disabled, the phone displays in portrait mode
only.
• Animation: determines whether some or all of the window
elements animate. Selections are: No animations, Some
animations, or All animations.
• Screen timeout: adjusts the delay time before the screen
automatically turns off. Selections are: 15 seconds, 30 seconds,
1 minute, 2 minutes, 10 minutes, and 30 minutes.
• Touch key light duration: to adjust the light duration of the touch
keys.
• Auto adjust screen power: adjusts the phone’s LCD brightness
level to automatically adjust and conserve battery power.
• Horizontal calibration: uses the accelerometer to calibrate the
phone when held in a horizontal position.
• Gyroscope calibration: uses the built-in gyroscope to calibrate
motion when the phone is in motion.
209
Adjusting Screen Brightness
This feature configures the LCD Brightness levels.
1.
Press
➔
and then tap
(Settings) ➔
Display ➔ Brightness.
2.
Tap Automatic brightness to allow the phone to self-adjust
and tap OK.
– or –
Touch and slide the on-screen slider to adjust the level and
tap OK.
Horizontal Calibration
Power Saving Mode
Calibrate your phone by using the built-in accelerometer.
1.
Press
➔
and then tap
(Settings) ➔
Display ➔ Horizontal calibration.
2.
Place the phone on a level surface and tap Calibrate. The
This feature allows you both automatically set the phone to use a
power saving mode and configure additional power saving
options manually, all in an effort to conserve battery power.
1.
2.
Calibrate your phone by using the built-in gyroscope.
➔
and then tap
1.
appears at the top of the screen. This
2.
➔
and then tap
(Settings) ➔ Power
Tap Use Power saving mode to enable this feature when the
battery level is low.
Place the phone on a level surface and tap Calibrate. The
phone adjusts the level of the accelerometer. During the
Press
saving mode.
(Settings) ➔
Display ➔ Gyroscope calibration.
2.
Confirm
To automatically enable power saving options:
Gyro Sensor Calibration
Press
(Settings) ➔ Power
indicates the power saving mode is active.
the center circle adjusts to the center position.
1.
and then tap
➔
saving mode.
phone adjusts the level of the accelerometer. During the
calibration process a green circle appears on-screen and
Press
3.
Tap Power saving mode on at to assign the “battery low”
calibration process a green circle appears on-screen and
level at which the power saving mode is activated. It is at
the center circle adjusts to the center position.
this level that the automatic power saving function will
“kick in”.
4.
Tap OK to store the new battery level.
Changing Your Settings
210
To activate additional power saving features:
1.
Activate Power saving mode.
2.
Tap any of the available fields to activate additional power
saving parameters. Choose from:
• Turn Off Wi-Fi to disable Wi-Fi when it is not connected to an AP.
• Turn Off Bluetooth to disable Bluetooth when not in use or actively
transmitting data.
• Turn Off GPS to disable the GPS location system when not in use.
• Turn off Sync to disable the feature when the phone is not
synchronizing with the server.
• Brightness to adjust the brightness of the screen. For more
information, refer to “Adjusting Screen Brightness” on
page 209.
• Screen timeout to adjust the time delay before the screen turns off.
• Power saving tips to display additional on-screen power saving
information.
Location and Security
The Location and Security settings allow you to configure phone
location and security settings.
Using Wireless Networks
Before you use applications such as Google Maps and find your
location or search for places of interest, you must enable the Use
wireless networks option or enable the GPS satellites.
1.
➔
and then tap
(Settings) ➔
Location and security.
2.
Tap Use wireless networks to enable location information
using the wireless network.
Enabling the GPS Satellites
1.
Press
➔
and then tap
(Settings) ➔
Location and security.
2.
211
Press
Tap Use GPS satellites enable the GPS satellite.
2.
Tap Set up screen lock ➔ Pattern.
(Settings) ➔
3.
Read the instructions then tap Next.
Location and security. For more information, refer to
4.
Review the onscreen animation procedure for drawing a
Enabling the sensor aiding
1.
Press
➔
and then tap
“Enabling a Location source” on page 150.
2.
Tap Use sensor aiding enhances positioning and save
pattern and tap Next when you are ready to draw a pattern.
5.
power while using the sensors.
Draw your pattern by touching your first on-screen point.
Then, without removing your finger from the screen, drag
Screen Unlock Pattern Settings
your finger over adjacent points until the gray trace line
To secure data and limit phone access, set the phone to require a
screen unlock pattern each time you turn on the device, or every
time the phone wakes up from sleep mode (when the screen
automatically turns off).
overlaps each point and they are highlighted with a green
circle.
6.
When you have connected at least four dots in a vertical,
horizontal or diagonal direction, lift your finger from the
Setting an Unlock Pattern
Creating a screen unlock pattern increases security on the
phone. When you enable the User visible pattern field, you will
draw an unlock pattern on the screen whenever you want to
unlock the phone’s buttons or touch screen. When you activate
the User tactile feedback field, you feel vibration as feedback
while drawing the pattern.
screen and tap Continue.
7.
Confirm the new pattern by redrawing it and then tapping
Confirm. The Unlock pattern is set.
Note: Make sure the Require Pattern field is activated.
1.
Press
➔
and then tap
(Settings) ➔
Location and security.
Changing Your Settings
212
Changing the Screen Lock Pattern
This feature allows you to change the previously stored unlock
pattern and update it if necessary. This process is similar to
changing your password from time to time.
1.
Press
➔
and then tap
2.
Tap Set up screen lock.
3.
Tap PIN.
4.
Enter a PIN number using the numeric keypad and touch
Continue to confirm the password.
(Settings) ➔
5.
Location and security.
Your phone now requires you to enter this PIN number in
2.
Tap Change screen lock.
3.
Retrace your current pattern on the screen.
4.
Tap Pattern and repeat steps 3 - 7 from the previous
order to unlock the phone.
Password Lock and Unlock
1.
section.
When enabled, this feature displays the onscreen lock grid that is
used to unlock the phone.
Using Tactile Feedback
When enabled, the User tactile feedback option, you will feel
vibration as feedback while drawing the pattern, using a PIN or
password lock.
PIN Lock and Unlock
Press
➔
and then tap
Location and security.
213
Press
➔
and then tap
(Settings) ➔
Location and security.
Using a Visible Pattern
1.
Confirm the PIN by re-entering it and tap OK to confirm.
(Settings) ➔
2.
Tap Set up screen lock.
3.
Tap Password.
4.
Enter a password using the keypad and tap Continue to
confirm the password.
5.
Confirm the password by re-entering it and tap OK to
confirm.
Setting up SIM Card Lock
Password Settings
Prevent another user from using your SIM card to make
unauthorized calls or from accessing information stored on your
SIM card by protecting the information using a PIN code.
1.
Press
➔
and then tap
(Settings) ➔
When you create a phone password you can also configure the
phone to display the password as you type it instead of using an
asterisk (*).
1.
Location and security.
2.
Tap Set up SIM card lock.
3.
Tap Lock SIM card, enter your SIM PIN code, then tap OK.
Note: You must activate Lock SIM card before you can change your SIM PIN
code.
To change an existing SIM Card PIN:
1.
Tap Change SIM PIN.
2.
Enter the old SIM PIN code and tap OK.
3.
Enter the new SIM PIN code and tap OK.
4.
Re-type the new SIM PIN code and tap OK.
Press
➔
and then tap
(Settings) ➔
Location and security.
2.
Tap Visible passwords to activate this feature.
Device Administration
Activating this feature allows Google to administrate your phone
in a way similar to IT security settings on a corporate PC. This
would be beneficial in the case that your phone was lost or
stolen. The phone could be “deactivated” or “restricted” (through
administration) from a remote location.
1.
Press
➔
and then tap
(Settings) ➔
Location and security.
2.
Tap Select device administrators to begin configuring this
setting.
3.
Select an administrator device and follow the prompts.
Changing Your Settings
214
Credential Storage
Applications
This option allows certain applications to access secure
certificates and other credentials. Certificates and credentials
can be installed to the SD card and password protected.
1.
Press
➔
and then tap
(Settings) ➔
Location and security.
2.
Tap Use secure credentials to activate this feature. A check
mark displayed next to the feature indicates secure
credentials is active.
3.
Tap Install from USB storage to install encrypted certificates
from the USB Storage location.
4.
Tap Set password to set or change the credential storage
password.
5.
This phone can be used for Android development. You can write
applications in the SDK and install them on this device, then run
the applications using the hardware, system, and network. This
feature allows you to configure the device for development.
Warning!: Android Dev Phones are not intended for non-developer
end-users. Because the device can be configured with system
software not provided by or supported by Google or any other
company, end-users operate these devices at their own risk.
Unknown Sources
Before you can download a web application you must enable the
Unknown sources feature (enables downloading). Developers can
use this option to install non-Market applications.
1.
➔
and then tap
(Settings) ➔
Applications.
Tap Clear storage to clear the storage (SD card or phone
memory) of all contents and reset the credentials
Press
2.
Tap Unknown sources to active this feature.
password.
Note: If you are notified that you can not download a Market application
because it comes from an “Unknown source”, enabling this option
corrects this issue.
215
Managing Applications
Uninstalling Third-party Applications
This feature allows you to manage installed applications. You can
view and control currently running services, or use the device for
application development.
You can also view the amount of memory or resources used as
well as the remaining memory and resources for each of the
applications on your phone and clear the data, cache, or defaults.
䊳
Press
➔
and then tap
Important!: You must have downloaded applications installed to use this
feature.
1.
2.
3.
➔
and then tap
(Settings) ➔
Tap the Downloaded tab and select your desired
Tap Uninstall (from within the top area of the Application
info page).
Important!: You must have downloaded applications installed to use this
feature.
Press
and then tap
application.
Clearing Application Cache and Data
1.
➔
Applications ➔ Manage applications.
(Settings) ➔
Applications ➔ Manage applications.
Press
(Settings) ➔
4.
At the prompt, tap OK to uninstall the application.
5.
Select a reason for uninstalling the application, then tap
OK.
Applications ➔ Manage applications.
2.
Tap an application in which to clear the cache or data.
3.
Tap Force stop, Clear data, or Clear cache.
Changing Your Settings
216
Moving Third-party Applications to your SD Card
Your phone’s built in memory is augmented by using a microSD
card to store additional data. When the phone’s built-in memory
capacity is reached, it can be possible to move some applications
over to the internal microSD card. Freeing up memory space on
the phone can help avoid any sluggish performance when the
phone has to work harder to manage memory resources.
Running Services
The Running services option allows you to view and control
currently running services such as Backup, Google Talk, SNS
(messaging), Swype, and more.
1.
Press
➔
and then tap
(Settings) ➔
Applications ➔ Running services.
The screen displays all the processes that are running.
Important!: Only certain downloaded applications are capable of being
moved from phone to card.
1.
Press
➔
and then tap
(Settings) ➔
Applications ➔ Manage applications.
2.
Tap the Downloaded tab and select your desired
application.
3.
Tap Move to SD card (from within the Storage section of the
Application info page).
Once the application has been moved to the microSD card, this
button now reads “Move to phone”.
217
2.
Tap a process to stop the process from running.
When you stop the process the service or application will
no longer run until you start the process or application
again.
Important!: Stopping a process might have undesirable consequences on the
application.
Memory Usage
Android Development
This option allows you to view a list of the memory usage for
currently active applications.
1.
Press
➔
and then tap
displays a list of the current applications.
Press
and then tap Sort by name/size to change the
list from being sorted either alphabetically or by largest
memory usage.
This option allows you to view a list of those components using
battery power.
Press
➔
➔
and then tap
(Settings) ➔
Applications ➔ Development.
Important!: These features are used for development purposes only.
USB Debugging
This feature is used for development purposes only.
Allowing Mock Locations
This feature is used for development purposes only.
Battery Usage
1.
Press
(Settings) ➔
Applications ➔ Memory usage. The All tab is opened and
2.
䊳
and then tap
(Settings) ➔
If you are a developer who is testing a GPS applications using
this device, you can tell the device that the phone is at different
GPS locations. In other words, the phone is allowed to “mock”
the coordinates.
Applications ➔ Battery use.
2.
Press
and then tap Refresh to update the list.
– or –
Tap an entry to view more detailed information.
Changing Your Settings
218
Synchronizing a Google Account
Accounts and Synchronization
Your phone provides the ability to synchronize data from a variety
of different sources or sites. These accounts can range from
Google, a Corporate Microsoft Exchange Email Server, and other
social sites such as Facebook, Twitter, and MySpace. Corporate
and Google accounts provide the ability to synchronize Calendar
events and Contacts.
To enable the auto-sync feature:
1.
Press
➔
and then tap
(Settings) ➔
By default, there are no accounts managed by the device. These
must be manually added.
To manage an existing Google account:
1.
Press
➔
and then tap
(Settings) ➔
Accounts and sync.
2.
Tap Add account ➔ Google.
3.
Tap Next ➔ Sign in.
Accounts and sync.
2.
Tap Auto-sync. A green checkmark indicates the feature is
Note: If you do not already have a Google account, tap Create and follow the
on-screen prompts to create your new account.
enabled. This feature enables the synchronization of data
between your phone and external sites or servers.
• The three main components are Contacts Email, and Calendar
Events. Before these can be synchronized, they must be added to
the managed accounts list.
• Background data: allows your phone to use data in the
background.
4.
Tap the Username (@gmail.com) and Password fields and
enter your information.
5.
Tap Sign in. Your phone then communicates with the
Google servers to confirm your information. Your existing
Gmail account then appears within the Manage accounts
area of the screen.
• Any changes or updates to your Gmail account are then
automatically updated to your device.
219
Synchronizing Your Corporate Account
To configure the Google management settings:
1.
Press
➔
and then tap
(Settings) ➔
Accounts and sync.
2.
Tap
within the Google account field to reveal the
account’s synchronization settings screen.
3.
Tap the parameters you wish to synchronize (Sync Books,
Sync Contacts, Sync Gmail, or Sync Calendar). A green
checkmark indicates the feature is enabled.
4.
Press
By default, there are no Corporate Calendar events managed by
the device. These must be manually added.
Note: Once a corporate email account is created, it is automatically added as
a managed account.
Use the following procedure to configure your phone to
synchronize with a corporate email account.
1.
From the Home screen, tap
(Applications)➔ Settings
➔ Accounts and sync.
to return to the previous screen.
For more information, refer to “Synchronizing Contacts”
– or –
on page 95.
Press
➔
and then tap
(Settings) ➔
Accounts and sync.
2.
Locate the email account containing the events you wish to
synchronize.
3.
Tap
within the adjacent account field to reveal the
account’s synchronization settings screen.
4.
Toggle the check mark adjacent to either the Sync Contacts
or Sync Calendar fields to manually sync the account.
Changing Your Settings
220
Motion Settings
This feature allows you to assign specific functions to certain
phone actions that are detected by both the accelerometer and
gyroscope.
To activate motion:
䊳
Press
➔
and then tap
(Settings) ➔
Motion ➔ Motion activation.
Note: If Motion activation is not enabled, all motion services are greyed-out
and disabled.
To activate different motion functions:
1.
Activate and configure any of the following motion
features.
• Turn over activates the mute function for incoming calls and
playing sounds.
• Tilt reduces or enlarges the screen while in the Gallery or Browser.
– Adjust the sensitivity slider and tap OK.
• Panning allows you to move icons one at a time, to another page in
the Home or Applications pages.
– Adjust the sensitivity slider and tap OK.
221
• Double tap allows you to activate voice commands within Voice
talk.
• Tutorials provide on-screen visual explanations of the above
features.
Privacy Settings
Location settings, backup configurations, or reset the phone to
erase all personal data.
䊳
Press
➔
and then tap
(Settings) ➔
Privacy.
Mobile Backup and Restore
The phone can be configured to back up your current settings,
application data and settings.
1.
Press
➔
and then tap
(Settings) ➔
Privacy.
2.
Tap Back up my data to create a backup of your current
phone settings and applications.
3.
Tap Automatic restore to assist in the re-installation of a
previously installed application (including preferences and
data).
Prior to doing a Factory Reset
Factory Data Reset
Before using Kies air to upgrade your device or initiating a factory
reset, it is recommended that you backup your personal data
prior to use.
From this menu you can reset your phone and sound settings to
the factory default settings.
1.
To export a Contact list to your microSD card:
(Contacts).
Press
➔
and then tap
(Settings) ➔
Privacy. (You will see a disclaimer.)
1.
From the Home screen, tap
2.
Press
3.
Tap Export to SD card ➔ OK. For more information, refer to
everything.
“Export/Import” on page 98.
The phone resets to the factory default settings
and then tap Import/Export.
Verify your images and videos are on your microSD card:
1.
From the Home screen, tap
(Applications) ➔
2.
Tap Factory data reset ➔ Reset phone.
3.
If necessary, enter your password and touch Erase
automatically and when finished displays the Home
screen.
(Gallery).
Note: Select Format USB storage to also erase all data on the USB storage.
2.
Verify the Gallery contains all of your pictures and videos.
3.
Remove the back cover and remove the internal microSD
card prior to initiating a Kies air update.
SD Card & Phone Storage
From this menu you can view the memory allocation for the
memory card as well as mount or unmount the SD card.
For more information about mounting or unmounting the SD card,
see “Using the SD Card” on page 51.
Changing Your Settings
222
To view the memory allocation for your external SD card:
䊳
Press
➔
and then tap
• Searchable items: opens a screen where you can choose the
search categories included in device searches. such as: Web,
Apps, Contacts, Memo, Messaging, Music, Slacker, or
Voice Search.
• Clear shortcuts: erases the history for recently selected search
results.
(Settings) ➔
Storage.The available memory displays under the Total
space and Available space headings.
Search Settings
You can use your phone's search preferences to configure some
aspects of Google Web search (for example, whether it makes
suggestions below the Quick Search Box as you type), and what
phone features you want to include in searches.
1.
Press
➔
and then tap
2.
Press
➔ Search settings.
3.
Tap any of the following search parameters to then alter
This setting allows you to configure the language in which to
display the menus. You can also set on-screen keyboard options.
䊳
• Google search opens a screen where you can set your Google
search preferences.
– Show web suggestions: includes search matches from Google’s
online search engine.
– Use My Location: uses your My Location information for Google
search results and services.
– Search history: determines whether you also wish to included
personalized search history results in the list of matches.
– Manage search history: helps to manage the personalized search
history associated with your current registered Google account.
Press
➔
and then tap
(Settings) ➔
Language and keyboard.
(Search).
the settings:
223
Language & Keyboard Settings
Language Settings
To set the language that the menus display on the phone:
1.
Press
➔
and then tap
(Settings) ➔
Language and keyboard ➔ Select language.
2.
Select a language and region from the list.
Select Input Method
Swype Advanced settings
There are two input methods available: Swype and Samsung
keypad.
1.
Press
➔
and then tap
(Settings) ➔
Language and keyboard ➔ Select input method.
2.
Select an input method.
Swype Settings
For more information, refer to “SWYPE Settings” on page 73.
1.
Press
➔
and then tap
(Settings) ➔
Language and keyboard ➔ Swype.
2.
Tap one of the following Swype preferences to activate the
setting:
• Language: allows you to select the current text input language.
Default language is US English.
• Audio feedback: turns off sounds generated by the Swype
application.
• Vibrate on keypress: activates a vibration sensation as you enter
text using the keypad.
• Show tips: turns on an on-screen flashing indicator that provides
helpful user information.
Advanced settings provide access to Swype operation
parameters.
• Word suggestion: uses a built-in word database to predict words
while entering text in Swype.
• Auto-spacing: automatically inserts a space between words.
When you finish a word, just lift your finger or stylus and start the
next word.
• Auto-capitalization: automatically capitalizes the first letter of a
sentence.
• Show complete trace: determines whether or not to display the
complete Swype trace path on-screen.
• Speed vs. accuracy: sets how quickly Swype responds to
on-screen input. Move the slider between Fast Response (speed) or
Error Tolerant (accuracy) and tap OK.
• Personal dictionary: helps to manage your personal dictionary.
• Reset Swype’s dictionary: once enabled, deletes any words you
have added to Swype’s dictionary.
Swype Help settings
Help settings provide access to Swype help operation
parameters.
• Swype help: displays the on-screen Swype User Manual.
• Tutorial: provides an on-screen tutorial that shows you how to input
text faster in Swype input mode.
Changing Your Settings
224
About
7.
Provides information about the current Swype application
version.
the first letter of a sentence.
8.
Samsung Keyboard Settings
1.
Press
➔
and then tap
(Settings) ➔
speech recognition application.
9.
Tap Portrait Keypad types and select a text input method:
• Qwerty Keypad
• 3x4 Keypad
3. Tap Input languages and select a language.
4.
Tap XT9 to use XT9 Predictive text method. For more
information, refer to “XT9 Advanced Settings” on
page 225. For more information, refer to “Text Input
Tap the Keypad sweeping field if you want to sweep the
10. Tap the Tutorial field to view a short tutorial on use of the
Samsung keyboard.
XT9 Advanced Settings
The following XT9 Advanced settings are available when the XT9
field is selected.
1.
6.
Tap the XT9 field to select XT9 (predictive text) mode, then
tap XT9 advanced settings.
2.
keypad and change from ABC to ?123 mode. For more
information, refer to “Text Input Methods” on page 72.
Tap Auto-full stop to automatically insert a full stop by
tapping the space bar twice.
Methods” on page 72.
5.
Tap Voice input to activate the Voice input feature. This is
an experimental feature that uses Google’s networked
Language and keyboard ➔ Samsung keypad.
2.
Tap the Auto-capitalization field to automatically capitalize
Tap the Word completion field to enable word completion.
Your phone predicts how to complete the word typed.
3.
Tap the Word completion point field then touch 2 letters, 3
Tap the Character preview field to automatically preview
letters, 4 letters, or the 5 letters radio button. Word
new characters prior to entry.
completion begins after 2 or more (depending on your
selection).
225
4.
Tap the Spell correction field. This option corrects
typographical errors by selecting from a list of possible
example youve becomes you’ve). A list of substitutions
words that reflect the characters of the keys you touched
displays.
as well as the characters of nearby keys.
5.
11. Tap XT9 auto-substitution to add words to substitute (for
12. If you do not see the substitution you want, press
Tap the Next word prediction field to enable word
and then tap Add, then input the Shortcut word and
prediction.
Substitution word.
6.
Tap the Auto-append field to automatically add predictions.
7.
Tap the Auto-substitution field to automatically replace
Voice Input and Output Settings
words that you are typing. This option assists with
Configuring Voice Input Recognition
correcting misspelled words.
8.
13. Tap Done.
This feature allows the phone to correctly recognize verbal input.
Tap the Regional correction field. This option sets the
1.
device to automatically correct mistyped words according
to normal spelling for your region.
9.
Press
➔
and then tap
(Settings) ➔
Voice input and output ➔ Voice recognition settings.
2.
Configure the available options to alter the settings
Tap the Recapture field. This option sets the device to
associated with this feature:
re-display the word suggestion list when you select the
• Language: selects an input language and associated dialect
recognition (if available).
• SafeSearch: sets the explicit image filter settings. These settings
apply to only Google voice search results. Choose from: Off,
Moderate, or Strict.
wrong word from the list.
10. To add a new word to the T9 dictionary:
Tap the XT9 my words field, then press
and then tap
Add. Enter the new word in the Register to XT9 my words
field, then tap Done.
Changing Your Settings
226
• Block offensive words: allows you to block recognition of known
offensive words or language. (A green check mark indicates the
feature is active).
3. Press
to return to the previous screen.
• Default engine: sets the speech synthesis engine that will be used
for the spoken text. Choices include: Pico TTS.
• Install voice data: confirms the installation of necessary data
required for voice synthesis.
• Speech rate: adjusts the rate at which on-screen text is spoken by
the device. Choose from: Very slow, Slow, Normal, Fast, and Very
fast.
• Language: assigns the language used for verbal readout. Choose
from German (Germany), English (United Kingdom), English (United
States), Spanish (Spain), French (France), or Italian (Italy).
• Samsung TTS: configures the Samsung TTS settings for various
languages.
• Pico TTS: configures the pico TTS settings for various languages.
Configuring Text-to-speech
This feature allows the phone to provide a verbal readout of
on-screen data such as messages and incoming caller
information. This action is called TTS (Text To Speech).
1.
Press
➔
and then tap
(Settings) ➔
Voice input and output ➔ Text-to-speech settings.
2.
Configure the available options to alter the settings
associated with this feature:
• Listen to an example: plays a short example of what the text-tospeech feature sounds like on your device when activated.
• Driving mode: incoming calls and new notifications are
automatically ready out loud.
• Driving mode settings: selects those applications that will use TTS
while driving mode is activated. Choose from: Incoming call,
Message, New emails, New voicemail, Alarm, Schedule, or Unlock
screen.
• Always use my settings: accepts an override of application
settings with personal configurations for this text-to-speech settings
screen. If enabled, your device defaults to using the text-to-speech
feature.
227
Accessibility Settings
This service lets you enable and disable downloaded accessibility
applications that aid in navigating your Android device, such as
TalkBack (uses synthesized speech to describe the results of
actions), KickBack (provides haptic feedback for actions), and
SoundBack (plays sounds for various actions). Also lets you
enable use of the power key to end calls.
1.
Press
➔
Accessibility.
and then tap
(Settings) ➔
Note: Initially, it might be necessary to download accessibility applications
from the Android Market.
2.
Tap Accessibility to activate the feature, then select the
Important!: Deactivate Automatic to manually set the rest of the options.
3.
Month, Day, and Year then tap Set.
services for which you want data to log.
3.
Select The power key ends calls field to activate this feature
which ends any current calls.
This menu allows you to assign external speakers when the
device is docked.
Press
➔
and then tap
(Settings) ➔
Dock settings.
2.
Tap Audio output mode. This enables the phone to output
audio when docked to a compatible device.
Date and Time
This menu allows you to change the current time and date
displayed.
1.
Press
➔
and then tap
(Settings) ➔
Date and time.
2.
4.
Tap Select time zone, then tap a time zone.
5.
Tap Set time and use the plus or minus icons, set Hour, and
Minute. Tap PM or AM, then tap Set.
Dock Settings
1.
Tap Set date and use the plus or minus icons to set the
Tap Automatic to allow the network set the date and time.
• Optional: Touch Use 24-hour format. If this is not selected the
phone automatically uses a 12-hour format.
6. Tap Select date format and touch the date format type.
About Phone
This menu contains legal information, system tutorial
information, and other phone information such as the model
number, firmware version, baseband version, kernel version, and
software build number.
To access phone information:
䊳
Press
➔
and then tap
(Settings) ➔ About
phone. The following information displays:
• Status: displays the battery status, the level of the battery
(percentage), the phone number for this device, the network
connection, signal strength, mobile network type, service state,
Changing Your Settings
228
roaming status, mobile network state, IMEI number, IMEI SV, Wi-Fi
MAC address, Bluetooth address, and Up time.
• Battery use: displays the applications or services (in percentages)
that are using battery power.
• Legal information: This option displays information about Open
source licenses, License settings, as well as Google legal
information. This information clearly provides copyright and
distribution legal information and facts as well as Google Terms of
Service, Terms of Service for Android-powered Phones, and much
more pertinent information as a reference.
Read the information and terms, then press BACK to return to the
Settings menu.
Tip: To find your device’s DivX® registration code and information about
registering your device to play DivX protected video, tap License settings
➔DivX® VOD.
• Model number: displays the device’s model number.
• Android version: displays the firmware version loaded on this
device.
• Baseband version: displays the baseband version loaded on this
device.
• Kernel version: displays the kernel version loaded on this device.
• Build number: displays the software, build number.
229
Note: Firmware, baseband, kernel and build numbers are usually used for
updates to the handset or support. For additional information please
contact your T-Mobile service representative.
Software Update
The Software Update feature enables you to use your phone to
connect to the network and upload any new phone software
directly to your phone. The phone automatically updates with the
latest available software when you access this option.
䊳
Press
➔
and then tap
(Settings) ➔
Software update.
The phone automatically updates the software (if
available).
Changing Your Settings
230
Section 13: Health and Safety Information
This section outlines the safety precautions associated with using
your phone. The terms “mobile device” or “cell phone” are used
in this section to refer to your phone. Read this information before
using your mobile device.
Exposure to Radio Frequency (RF) Signals
The U.S. Food and Drug Administration (FDA) has published
information for consumers relating to Radio Frequency (RF)
exposure from wireless phones. The FDA publication includes the
following information:
Do cell phones pose a health hazard?
Many people are concerned that cell phone radiation will cause
cancer or other serious health hazards. The weight of scientific
evidence has not linked cell phones with any health problems.
Cell phones emit low levels of Radio Frequency (RF) energy. Over
the past 15 years, scientists have conducted hundreds of studies
looking at the biological effects of the radio frequency energy
emitted by cell phones. While some researchers have reported
biological changes associated with RF energy, these studies have
failed to be replicated. The majority of studies published have
failed to show an association between exposure to radio
frequency from a cell phone and health problems.
231
The low levels of RF cell phones emit while in use are in the
microwave frequency range. They also emit RF at substantially
reduced time intervals when in the stand-by mode. Whereas high
levels of RF can produce health effects (by heating tissue),
exposure to low level RF that does not produce heating effects
causes no known adverse health effects.
The biological effects of radio frequency energy should not be
confused with the effects from other types of electromagnetic
energy.
Very high levels of electromagnetic energy, such as is found in
X-rays and gamma rays, can ionize biological tissues. Ionization
is a process where electrons are stripped away from their normal
locations in atoms and molecules. It can permanently damage
biological tissues including DNA, the genetic material.
The energy levels associated with radio frequency energy,
including both radio waves and microwaves, are not great
enough to cause ionization of atoms and molecules. Therefore,
RF energy is a type of non-ionizing radiation. Other types of
non-ionizing radiation include visible light, infrared radiation
(heat), and other forms of electromagnetic radiation with
relatively low frequencies.
While RF energy does not ionize particles, large amounts can
increase body temperatures and cause tissue damage. Two
areas of the body, the eyes and the testes, are particularly
vulnerable to RF heating because there is relatively little blood
flow in them to carry away excess heat.
Research Results to Date: Is there a connection between
RF and certain health problems?
The results of most studies conducted to date say no. In addition,
attempts to replicate and confirm the few studies that have
shown a connection have failed.
The scientific community at large therefore believes that the
weight of scientific evidence does not show an association
between exposure to Radio Frequency (RF) from cell phones and
adverse health outcomes. Still the scientific community has
supported additional research to address gaps in knowledge.
Some of these studies are described below.
Interphone Study
Interphone is a large international study designed to determine
whether cell phones increase the risk of head and neck cancer. A
report published in the International Journal of Epidemiology
(June, 2010) compared cell phone usage for more than 5,000
people with brain tumors (glioma and meningioma) and a similar
number of healthy controls.
Results of this study did NOT show that cell phones caused brain
cancer. In this study, most people had no increased risk of brain
cancer from using cell phones. For people with the heaviest use
of cell phones (an average of more than ½ hour per day, every
day, for over 10 years) the study suggested a slight increase in
brain cancer. However, the authors determined that biases and
errors prevented any conclusions being drawn from this data.
Additional information about Interphone can be found at
http://com.iarc.fr/en/media-centre/pr/.
Interphone is the largest cell phone study to date, but it did not
answer all questions about cell phone safety. Additional research
is being conducted around the world, and the FDA continues to
monitor developments in this field.
International Cohort Study on Mobile Phone Users (COSMOS)
The COSMOS study aims to conduct long-term health monitoring
of a large group of people to determine if there are any health
issues linked to long-term exposure to radio frequency energy
from cell phone use. The COSMOS study will follow
approximately 300,000 adult cell phone users in Europe for 20 to
30 years. Additional information about the COSMOS study can be
found at http://www.ukcosmos.org/index.html.
Health and Safety Information
232
Risk of Brain Cancer from Exposure to Radio Frequency Fields
in Childhood and Adolescence (MOBI-KIDS)
MOBI-KIDS is an international study investigating the relationship
between exposure to radio frequency energy from
communication technologies including cell phones and brain
cancer in young people. This is an international multi-center
study involving 14 European and non-European countries.
Additional information about MOBI-KIDS can be found at
http://www.creal.cat/programes-recerca/en_projectes-creal/
view.php?ID=39.
Surveillance, Epidemiology, and End Results (SEER) Program
of the National Cancer Institute
The National Cancer Institute (NCI) actively follows cancer
statistics in the United States to detect any change in rates of
new cases for brain cancer. If cell phones play a role in risk for
brain cancer, rates should go up, because heavy cell phone use
has been common for quite some time in the U.S. Between 1987
and 2005, the overall age-adjusted incidence of brain cancer did
not increase. Additional information about SEER can be found at
http://seer.cancer.gov/.
233
Cell Phone Industry Actions
Although the existing scientific data do not justify FDA regulatory
actions, the FDA has urged the cell phone industry to take a
number of steps, including the following:
• Support-needed research on possible biological effects of RF for
the type of signal emitted by cell phones;
• Design cell phones in a way that minimizes any RF exposure to the
user; and
• Cooperate in providing users of cell phones with the current
information on cell phone use and human health concerns.
The FDA also is working with voluntary standard-setting bodies
such as the Institute of Electrical and Electronics Engineers
(IEEE), the International Commission on Non-Ionizing Radiation
Protection (ICNIRP), and others to assure that safety standards
continue to adequately protect the public.
Reducing Exposure: Hands-Free Kits and Other
Accessories
Steps to Reduce Exposure to Radio Frequency Energy
If there is a risk from being exposed to radio frequency energy
(RF) from cell phones - and at this point we do not know that
there is - it is probably very small. But, if you are concerned
about avoiding even potential risks, you can take a few simple
steps to minimize your RF exposure.
• Reduce the amount of time spent using your cell phone;
• Use speaker mode or a headset to place more distance between your
head and the cell phone.
Hands-Free Kits
Hands-free kits may include audio or Bluetooth® headsets and
various types of body-worn accessories such as belt-clips and
holsters. Combinations of these can be used to reduce RF energy
absorption from cell phones.
Headsets can substantially reduce exposure because the phone
is held away from the head in the user's hand or in approved
body-worn accessories. Cell phones marketed in the U.S. are
required to meet RF exposure compliance requirements when
used against the head and against the body.
Because there are no known risks from exposure to RF emissions
from cell phones, there is no reason to believe that hands-free
kits reduce risks. Hands-free kits can be used for convenience
and comfort. They are also required by law in many states if you
want to use your phone while driving.
Cell Phone Accessories that Claim to Shield the Head from
RF Radiation
Because there are no known risks from exposure to RF emissions
from cell phones, there is no reason to believe that accessories
which claim to shield the head from those emissions reduce
risks. Some products that claim to shield the user from RF
absorption use special phone cases, while others involve nothing
more than a metallic accessory attached to the phone. Studies
have shown that these products generally do not work as
advertised. Unlike “hands-free” kits, these so-called “shields”
may interfere with proper operation of the phone. The phone may
be forced to boost its power to compensate, leading to an
increase in RF absorption.
Children and Cell Phones
The scientific evidence does not show a danger to any users of
cell phones from RF exposure, including children and teenagers.
The steps adults can take to reduce RF exposure apply to
children and teenagers as well.
• Reduce the amount of time spent on the cell phone;
Health and Safety Information
234
• Use speaker mode or a headset to place more distance between the
head and the cell phone.
Some groups sponsored by other national governments have
advised that children be discouraged from using cell phones at
all. For example, The Stewart Report from the United Kingdom
made such a recommendation in December 2000. In this report,
a group of independent experts noted that no evidence exists that
using a cell phone causes brain tumors or other ill effects. Their
recommendation to limit cell phone use by children was strictly
precautionary; it was not based on scientific evidence that any
health hazard exists.
Additional information on the safety of RF exposures from various
sources can be obtained from the following organizations
(updated 10/1/2010):
• FCC RF Safety Program:
http://www.fcc.gov/oet/rfsafety/.
• Environmental Protection Agency (EPA):
http://www.epa.gov/radtown/wireless-tech.html.
• Occupational Safety and Health Administration (OSHA):
http://www.osha.gov/SLTC/radiofrequencyradiation/.
(Note: This web address is case sensitive.)
• National Institute for Occupational Safety and Health (NIOSH):
http://www.cdc.gov/niosh/.
235
• World Health Organization (WHO):
http://www.who.int/peh-emf/en/.
• International Commission on Non-Ionizing Radiation Protection:
http://www.icnirp.de.
• Health Protection Agency:
http://www.hpa.org.uk/Topics/Radiation/.
• US Food and Drug Administration:
http://www.fda.gov/Radiation-EmittingProducts/
RadiationEmittingProductsandProcedures/
HomeBusinessandEntertainment/CellPhones/default.htm.
Specific Absorption Rate (SAR) Certification
Information
Your wireless phone is a radio transmitter and receiver. It is
designed and manufactured not to exceed the exposure limits for
Radio Frequency (RF) energy set by the Federal Communications
Commission (FCC) of the U.S. Government.
These FCC exposure limits are derived from the
recommendations of two expert organizations: the National
Council on Radiation Protection and Measurement (NCRP) and
the Institute of Electrical and Electronics Engineers (IEEE).
In both cases, the recommendations were developed by scientific
and engineering experts drawn from industry, government, and
academia after extensive reviews of the scientific literature
related to the biological effects of RF energy.
The exposure limit set by the FCC for wireless mobile phones
employs a unit of measurement known as the Specific
Absorption Rate (SAR). The SAR is a measure of the rate of
absorption of RF energy by the human body expressed in units of
watts per kilogram (W/kg). The FCC requires wireless phones to
comply with a safety limit of 1.6 watts per kilogram (1.6 W/kg).
For body-worn operation, this phone has been tested and meets
FCC RF exposure guidelines when used with an accessory that
contains no metal and that positions the mobile device a
minimum of 1.0 cm from the body.
The FCC exposure limit incorporates a substantial margin of
safety to give additional protection to the public and to account
for any variations in measurements.
The FCC has granted an Equipment Authorization for this mobile
phone with all reported SAR levels evaluated as in compliance
with the FCC RF exposure guidelines. The maximum SAR values
for this model phone as reported to the FCC are:
SAR tests are conducted using standard operating positions
accepted by the FCC with the phone transmitting at its highest
certified power level in all tested frequency bands. Although the
SAR is determined at the highest certified power level, the actual
SAR level of the phone while operating can be well below the
maximum value. This is because the phone is designed to
operate at multiple power levels so as to use only the power
required to reach the network. In general, the closer you are to a
wireless base station antenna, the lower the power output.
Before a new model phone is available for sale to the public, it
must be tested and certified to the FCC that it does not exceed
the exposure limit established by the FCC. Tests for each model
phone are performed in positions and locations (e.g. at the ear
and worn on the body) as required by the FCC.
Use of other accessories may not ensure compliance with FCC RF
exposure guidelines.
Cellular/PCS WCDMA/GSM/EDGE and AWS WCDMA
• Head: 0.23 W/Kg.
• Body-worn Accessory: 0.99 W/Kg.
• Product Specific: 0.99 W/kg;
• Simultaneous Transmission: 1.30 W/kg.
WLAN
• Head: 0.35 W/Kg.
• Body-worn Accessory: 0.31 W/Kg.
• Product Specific: 0.10 W/kg;
• Simultaneous Transmission: 1.30 W/kg
Health and Safety Information
236
SAR information on this and other model phones can be viewed
online at http://www.fcc.gov/oet/ea. To find information that
pertains to a particular model phone, this site uses the phone
FCC ID number which is usually printed somewhere on the case
of the phone.
Sometimes it may be necessary to remove the battery pack to
find the number. Once you have the FCC ID number for a
particular phone, follow the instructions on the website and it
should provide values for typical or maximum SAR for a particular
phone. Additional product specific SAR information can also be
obtained at www.fcc.gov/cgb/sar.
Smart Practices While Driving
On the Road - Off the Phone
The primary responsibility of every driver is the safe operation of
his or her vehicle.
Responsible drivers understand that no secondary task should be
performed while driving whether it be eating, drinking, talking to
passengers, or talking on a mobile phone - unless the driver has
assessed the driving conditions and is confident that the
secondary task will not interfere with their primary responsibility.
Do not engage in any activity while driving a moving vehicle which
may cause you to take your eyes off the road or become so
absorbed in the activity that your ability to concentrate on the act
of driving becomes impaired. Samsung is committed to promoting
237
responsible driving and giving drivers the tools they need to
understand and address distractions.
Check the laws and regulations on the use of mobile devices and
their accessories in the areas where you drive. Always obey them.
The use of these devices may be prohibited or restricted in certain
areas. For example, only hands-free use may be permitted in
certain areas.
Before answering calls, consider your circumstances. Let the call
go to voicemail when driving conditions require. Remember,
driving comes first, not the call!
If you consider a call necessary and appropriate, follow these
tips:
• Use a hands-free device;
• Secure your phone within easy reach;
• Place calls when you are not moving;
• Plan calls when your car will be stationary;
• Do not engage in stressful or emotional conversations;
• Let the person with whom you are speaking know that you are driving
and will suspend the call if necessary;
• Do not take notes or look up phone numbers while driving;
Notice regarding legal restrictions on mounting this device in an
automobile:
Laws in some states may prohibit mounting this device on or
near the windshield of an automobile. In other states, the law
may permit mounting this device only in specific locations in the
automobile. Be sure to consult the state and local laws or
ordinances where you drive before mounting this device in an
automobile. Failure to comply with these restrictions could result
in fines, penalties, or other damages.
Never mount this device in a manner that will obstruct the
driver's clear view of the street and traffic.
Never use wireless data services such as text messaging, Web
browsing, or e-mail while operating a vehicle.
Never watch videos, such as a movie or clip, or play video games
while operating a vehicle.
For more information, go to http://www.ctia.org.
Battery Use and Safety
Important!: Handle and store batteries properly to avoid injury or damage.
Most battery issues arise from improper handling of batteries
and, particularly, from the continued use of damaged batteries.
• Do not disassemble, crush, puncture, shred, or otherwise attempt
to change the form of your battery. Do not put a high degree of
pressure on the battery. This can cause leakage or an internal shortcircuit, resulting in overheating.
• Do not let the phone or battery come in contact with liquids.
Liquids can get into the phone's circuits, leading to corrosion. Even
when the phone appears to be dry and appears to operate normally,
the circuitry could slowly corrode and pose a safety hazard. If the
phone and/or battery get wet, have them checked by your service
provider or contact Samsung, even if they appear to be working
properly.
• Do not place your battery in or near a heat source. Excessive
heating can damage the phone or the battery and could cause the
phone or the battery to explode. Do not dry a wet or damp battery with
an appliance or heat source such as a microwave oven, hair dryer,
iron, or radiator. Avoid leaving your phone in your car in high
temperatures.
• Do not dispose of the phone or the battery in a fire. The phone or
the battery may explode when overheated.
• Do not handle a damaged or leaking battery. Do not let leaking
battery fluid come in contact with your eyes, skin or clothing. For safe
disposal options, contact your nearest Samsung-authorized service
center.
• Avoid dropping the cell phone. Dropping the phone or the battery,
especially on a hard surface, can potentially cause damage to the
phone and battery. If you suspect damage to the phone or battery, take
it to a service center for inspection.
• Never use any charger or battery that is damaged in any way.
Health and Safety Information
238
• Do not allow the battery to touch metal objects. Accidental
short-circuiting can occur when a metallic object (coin, key, jewelry,
clip, or pen) causes a direct connection between the + and - terminals
of the battery (metal strips on the battery), for example when you carry
a spare battery in a pocket or bag. Short-circuiting the terminals may
damage the battery or the object causing the short-circuiting.
Important!: Important: Use only Samsung-approved batteries, and recharge
your battery only with Samsung-approved chargers which are
specifically designed for your phone.
Warning!: Warning: Use of a non-Samsung-approved battery or charger may
present a risk of fire, explosion, leakage, or other hazard.
Samsung's warranty does not cover damage to the phone caused
by non-Samsung-approved batteries and/or chargers.
• Do not use incompatible cell phone batteries and chargers. Some
websites and second-hand dealers not associated with reputable
manufacturers and carriers, might be selling incompatible or even
counterfeit batteries and chargers. Consumers should purchase
manufacturer or carrier-recommended products and accessories. If
unsure about whether a replacement battery or charger is compatible,
contact the manufacturer of the battery or charger.
• Misuse or use of incompatible phones, batteries, and charging
devices could result in damage to the equipment and a possible
risk of fire, explosion, or leakage, leading to serious injuries,
damages to your phone, or other serious hazard.
239
Samsung Mobile Products and Recycling
Samsung cares for the environment and encourages its
customers to recycle Samsung mobile devices and genuine
Samsung accessories.
Proper disposal of your mobile device and its battery is not only
important for safety, it benefits the environment. Batteries must
be recycled or disposed of properly.
Recycling programs for your mobile device, batteries, and
accessories may not be available in your area.
We've made it easy for you to recycle your old Samsung mobile
device by working with respected take-back companies in every
state in the country.
Drop It Off
Dispose of unwanted electronics through an approved recycler.
You can drop off your Samsung-branded mobile device and
batteries for recycling at one of our numerous Samsung
Recycling Direct (SM) locations. A list of these locations may be
found at: http://pages.samsung.com/us/recyclingdirect/
usactivities_environment_samsungrecyclingdirect_locations.jsp.
To find the nearest recycling location, go to our website:
Samsung-branded devices and batteries will be accepted at
these locations for no fee.
Consumers may also recycle their used mobile device or
batteries at many retail or carrier-provided locations where
mobile devices and batteries are sold. Additional information
regarding specific locations may be found at:
http://www.epa.gov/epawaste/partnerships/plugin/cellphone/
index.htm or at http://www.call2recycle.org/.
Mail It In
The Samsung Mobile Take-Back Program will provide Samsung
customers with a free recycling mailing label. Just go to
http://www.samsung.com/us/mobiletakeback and follow the
instructions to print out a free pre-paid postage label and then
send your old mobile device or battery to the address listed, via
U.S. Mail, for recycling.
www.samsung.com/recyclingdirect
Or call, (877) 278-0799.
Follow local regulations regarding disposal of mobile devices
and batteries
Dispose of your mobile device and batteries in accordance with
local regulations. In some areas, the disposal of these items in
household or business trash may be prohibited. Help us protect
the environment - recycle!
Warning!: Never dispose of batteries in a fire because they may explode.
UL Certified Travel Charger
The Travel Charger for this phone has met applicable UL safety
requirements. Please adhere to the following safety instructions
per UL guidelines:
FAILURE TO FOLLOW THE INSTRUCTIONS OUTLINED MAY
LEAD TO SERIOUS PERSONAL INJURY AND POSSIBLE
PROPERTY DAMAGE.
Health and Safety Information
240
IMPORTANT SAFETY INSTRUCTIONS - SAVE THESE
WARRANTY DISCLAIMER: PROPER USE OF A TOUCH-SCREEN
INSTRUCTIONS.
MOBILE DEVICE
DANGER - TO REDUCE THE RISK OF FIRE OR ELECTRIC
SHOCK, CAREFULLY FOLLOW THESE INSTRUCTIONS.
If your mobile device has a touch-screen display, please
FOR CONNECTION TO A SUPPLY NOT IN NORTH
AMERICA, USE AN ATTACHMENT PLUG ADAPTOR OF
THE PROPER CONFIGURATION FOR THE POWER
OUTLET.
from the pad of your finger or a non-metallic stylus. Using
THIS POWER UNIT IS INTENDED TO BE CORRECTLY
ORIENTED IN A VERTICAL OR HORIZONTAL OR FLOOR
MOUNT POSITION.
and void the warranty. For more information, please refer
Display / Touch-Screen
Please note the following information when using your mobile
device:
WARNING REGARDING DISPLAY
The display on your mobile device is made of glass or
acrylic and could break if your mobile device is dropped or
if it receives significant impact. Do not use if screen is
broken or cracked as this could cause injury to you.
241
note that a touch-screen responds best to a light touch
excessive force or a metallic object when pressing on the
touch-screen may damage the tempered glass surface
to the “Standard Limited Warranty” on page 252.
GPS & AGPS
Certain Samsung mobile devices can use a Global Positioning
System (GPS) signal for location-based applications. A GPS uses
satellites controlled by the U.S. Government that are subject to
changes implemented in accordance with the Department of
Defense policy and the 2008 Federal Radio navigation Plan (FRP).
Changes may affect the performance of location-based
technology on your mobile device.
Certain Samsung mobile devices can also use an Assisted Global
Positioning System (AGPS), which obtains information from the
cellular network to improve GPS performance. AGPS uses your
wireless service provider's network and therefore airtime, data
charges, and/or additional charges may apply in accordance with
your service plan. Contact your wireless service provider for
details.
Your Location
Location-based information includes information that can be
used to determine the approximate location of a mobile device.
Mobile devices which are connected to a wireless network
transmit location-based information. Additionally, if you use
applications that require location-based information (e.g. driving
directions), such applications transmit location-based
information. The location-based information may be shared with
third-parties, including your wireless service provider,
applications providers, Samsung, and other third-parties
providing services.
AGPS has limitations and might not work in your area. Therefore:
• Always tell the emergency responder your location to the best of your
ability; and
• Remain on the mobile device for as long as the emergency responder
instructs you.
Navigation
Maps, directions, and other navigation data may contain
inaccurate or incomplete data, and circumstances can and do
change over time. In some areas, complete information may not
be available. Therefore, you should always visually confirm that
the navigational instructions are consistent with what you see
before following them. All users should pay attention to road
conditions, closures, traffic, and all other factors that may impact
safe driving or walking. Always obey posted road signs.
Use of AGPS in Emergency Calls
When you make an emergency call, the cellular network may
activate AGPS technology in your mobile device to tell the
emergency responders your approximate location.
Health and Safety Information
242
Emergency Calls
This mobile device, like any wireless mobile device, operates
using radio signals, wireless and landline networks, as well as
user-programmed functions, which cannot guarantee connection
in all conditions, areas, or circumstances. Therefore, you should
never rely solely on any wireless mobile device for essential
communications (medical emergencies, for example). Before
traveling in remote or underdeveloped areas, plan an alternate
method of contacting emergency services personnel. Remember,
to make or receive any calls, the mobile device must be switched
on and in a service area with adequate signal strength.
Emergency calls may not be possible on all wireless mobile
device networks or when certain network services and/or mobile
device features are in use. Check with local service providers.
To make an emergency call:
Care and Maintenance
Your mobile device is a product of superior design and
craftsmanship and should be treated with care. The suggestions
below will help you fulfill any warranty obligations and allow you
to enjoy this product for many years:
Keep your Samsung Mobile Device away from:
Liquids of any kind
1.
If the phone is not on, switch it on.
2.
From the Home screen, tap
. Enter the emergency
number for your present location (for example, 911 or
other official emergency number), then tap
Emergency numbers vary by location.
243
If certain features are in use (call blocking, for example), you may
first need to deactivate those features before you can make an
emergency call. Consult your User Manual and your local cellular
service provider. When making an emergency call, remember to
give all the necessary information as accurately as possible.
Remember that your mobile device may be the only means of
communication at the scene of an accident; do not cut off the call
until given permission to do so.
Keep the mobile device dry. Precipitation, humidity, and liquids
contain minerals that will corrode electronic circuits. If the
mobile device does get wet, do not accelerate drying with the
use of an oven, microwave, or dryer, because this may damage
the mobile device and could cause a fire or explosion. Do not
use the mobile device with a wet hand. Doing so may cause an
electric shock to you or damage to the mobile device.
Extreme heat or cold
Avoid temperatures below 0°C / 32°F or above 45°C / 113°F.
Microwaves
Do not try to dry your mobile device in a microwave oven.
Doing so may cause a fire or explosion.
Dust and dirt
Do not expose your mobile device to dust, dirt, or sand.
Cleaning solutions
Do not use harsh chemicals, cleaning solvents, or strong
detergents to clean the mobile device. Wipe it with a soft cloth
slightly dampened in a mild soap-and-water solution.
Shock or vibration
Do not drop, knock, or shake the mobile device. Rough
handling can break internal circuit boards.
Paint
Do not paint the mobile device. Paint can clog the device’s
moving parts or ventilation openings and prevent proper
operation.
Responsible Listening
Caution!: Avoid potential hearing loss.
Damage to hearing occurs when a person is exposed to loud
sounds over time. The risk of hearing loss increases as sound is
played louder and for longer durations. Prolonged exposure to
loud sounds (including music) is the most common cause of
preventable hearing loss. Some scientific research suggests that
using portable audio devices, such as portable music players and
cell phones, at high volume settings for long durations may lead
to permanent noise-induced hearing loss. This includes the use
of headphones (including headsets, earbuds, and Bluetooth® or
other wireless devices). Exposure to very loud sound has also
been associated in some studies with tinnitus (a ringing in the
ear), hypersensitivity to sound, and distorted hearing. Individual
susceptibility to noise-induced hearing loss and potential hearing
problem varies. Additionally, the amount of sound produced by a
portable audio device varies depending on the nature of the
sound, the device settings, and the headphones that are used. As
a result, there is no single volume setting that is appropriate for
everyone or for every combination of sound, settings, and
equipment.
Health and Safety Information
244
You should follow some common sense recommendations when
using any portable audio device:
• Always turn the volume down before plugging the earphones into an
audio source.
• Set the volume in a quiet environment and select the lowest volume at
which you can hear adequately.
• Be aware that you can adapt to higher volume settings over time, not
realizing that the higher volume may be harmful to your hearing.
• When using headphones, turn the volume down if you cannot hear the
people speaking near you or if the person sitting next to you can hear
what you are listening to.
• Do not turn the volume up to block out noisy surroundings. If you
choose to listen to your portable device in a noisy environment, use
noise-cancelling headphones to block out background environmental
noise. By blocking background environment noise, noise cancelling
headphones should allow you to hear the music at lower volumes than
when using earbuds.
• Limit the amount of time you listen. As the volume increases, less time
is required before you hearing could be affected.
• Avoid using headphones after exposure to extremely loud noises, such
as rock concerts, that might cause temporary hearing loss. Temporary
hearing loss might cause unsafe volumes to sound normal.
• Do not listen at any volume that causes you discomfort. If you
experience ringing in your ears, hear muffled speech, or experience
245
any temporary hearing difficulty after listening to your portable audio
device, discontinue use and consult your doctor.
You can obtain additional information on this subject from the
following sources:
American Academy of Audiology
11730 Plaza American Drive, Suite 300
Reston, VA 20190
Voice: (800) 222-2336
Email: info@audiology.org
Internet: http://www.audiology.org/Pages/default.aspx
National Institute on Deafness and Other Communication Disorders
National Institutes of Health
31 Center Drive, MSC 2320
Bethesda, MD 20892-2320
Email: nidcdinfo@nih.gov
Internet: http://www.nidcd.nih.gov/
National Institute for Occupational Safety and Health (NIOSH)
395 E Street, S.W.
Suite 9200
Patriots Plaza Building
Washington, DC 20201
Voice: 1-800-35-NIOSH (1-800-356-4674)
1-800-CDC-INFO (1-800-232-4636)
Outside the U.S. 513-533-8328
Email: cdcinfo@cdc.gov
Internet: http://www.cdc.gov/niosh/topics/noise/default.html
1-888-232-6348 TTY
Operating Environment
Remember to follow any special regulations in force in any area,
and always switch your mobile device off whenever it is
forbidden to use it, or when it may cause interference or danger.
When connecting the mobile device or any accessory to another
device, read its user's guide for detailed safety instructions. Do
not connect incompatible products.
Using Your Mobile Device Near Other Electronic Devices
Most modern electronic equipment is shielded from Radio
Frequency (RF) signals. However, certain electronic equipment
may not be shielded against the RF signals from your wireless
mobile device. Consult the manufacturer to discuss alternatives.
Implantable Medical Devices
A minimum separation of six (6) inches should be maintained
between a handheld wireless mobile device and an implantable
medical device, such as a pacemaker or implantable cardioverter
defibrillator, to avoid potential interference with the device.
Persons who have such devices:
• Should ALWAYS keep the mobile device more than six (6) inches from
their implantable medical device when the mobile device is turned ON;
• Should not carry the mobile device in a breast pocket;
• Should use the ear opposite the implantable medical device to
minimize the potential for interference;
• Should turn the mobile device OFF immediately if there is any reason
to suspect that interference is taking place;
• Should read and follow the directions from the manufacturer of your
implantable medical device. If you have any questions about using
your wireless mobile device with an implantable medical device,
consult your health care provider.
Health and Safety Information
246
For more information see: http://www.fcc.gov/oet/rfsafety/rffaqs.html#.
Other Medical Devices
If you use any other personal medical devices, consult the
manufacturer of your device to determine if it is adequately
shielded from external RF energy. Your physician may be able to
assist you in obtaining this information. Switch your mobile
device off in health care facilities when any regulations posted in
these areas instruct you to do so. Hospitals or health care
facilities may be using equipment that could be sensitive to
external RF energy.
Vehicles
RF signals may affect improperly installed or inadequately
shielded electronic systems in motor vehicles. Check with the
manufacturer or its representative regarding your vehicle before
using your mobile device in a motor vehicle. You should also
consult the manufacturer of any equipment that has been added
to your vehicle.
Posted Facilities
Switch your mobile device off in any facility where posted notices
require you to do so.
247
Potentially Explosive Environments
Switch your mobile device off when in any area with a potentially
explosive atmosphere and obey all signs and instructions. Sparks
in such areas could cause an explosion or fire resulting in bodily
injury or even death. Users are advised to switch the mobile
device off while at a refueling point (service station). Users are
reminded of the need to observe restrictions on the use of radio
equipment in fuel depots (fuel storage and distribution areas),
chemical plants, or where blasting operations are in progress.
Areas with a potentially explosive atmosphere are often, but not
always, clearly marked. They include below deck on boats,
chemical transfer or storage facilities, vehicles using liquefied
petroleum gas (such as propane or butane), areas where the air
contains chemicals or particles, such as grain, dust, or metal
powders, and any other area where you would normally be
advised to turn off your vehicle engine.
FCC Hearing Aid Compatibility (HAC)
Regulations for Wireless Devices
On July 10, 2003, the U.S. Federal Communications Commission
(FCC) Report and Order in WT Docket 01-309 modified the
exception of wireless mobile devices under the Hearing Aid
Compatibility Act of 1988 (HAC Act) to require digital wireless
mobile devices be compatible with hearing aids.
The intent of the HAC Act is to ensure reasonable access to
telecommunications services for persons with hearing
disabilities. While some wireless mobile devices are used near
some hearing devices (hearing aids and cochlear implants),
users may detect a buzzing, humming, or whining noise. Some
hearing devices are more immune than others to this
interference noise, and mobile devices also vary in the amount of
interference they generate.
The wireless telephone industry has developed a rating system
for wireless mobile devices to assist hearing device users find
mobile devices that may be compatible with their hearing
devices. Not all mobile devices have been rated. Mobile devices
that are rated have the rating on their box or a label located on
the box.
The ratings are not guarantees. Results will vary depending on
the user's hearing device and hearing loss. If your hearing device
happens to be vulnerable to interference, you may not be able to
use a rated mobile device successfully. Trying out the mobile
device with your hearing device is the best way to evaluate it for
your personal needs.
M-Ratings: Mobile devices rated M3 or M4 meet FCC
requirements and are likely to generate less interference to
hearing devices than mobile devices that are not labeled. M4 is
the better/higher of the two ratings.
T-Ratings: Mobile devices rated T3 or T4 meet FCC requirements
and are likely to generate less interference to hearing devices
than mobile devices that are not labeled. T4 is the better/higher
of the two ratings.
Hearing devices may also be rated. Your hearing device
manufacturer or hearing health professional may help you find
this rating. Higher ratings mean that the hearing device is
relatively immune to interference noise. The hearing aid and
wireless mobile device rating values are then added together.
A sum of 5 is considered acceptable for normal use. A sum of 6
is considered for best use. If a hearing aid meets the M2 level
rating and the wireless mobile device meets the M3 level rating,
the sum of the two values equal M5. This is synonymous for T
ratings. This should provide the hearing aid user with “normal
usage” while using their hearing aid with the particular wireless
mobile device.
Health and Safety Information
248
“Normal usage” in this context is defined as a signal quality that
is acceptable for normal operation. The M mark is intended to be
synonymous with the U mark. The T mark is intended to be
synonymous with the UT mark. The M and T marks are
recommended by the Alliance for Telecommunications Industries
Solutions (ATIS). The U and UT marks are referenced in Section
20.19 of the FCC Rules.
The HAC rating and measurement procedure are described in the
American National Standards Institute (ANSI) C63.19 standard.
HAC/Wi-Fi for Newer Technologies
This phone has been tested and rated for use with hearing aids
for some of the wireless technologies that it uses. However, there
may be some newer wireless technologies used in this phone
that have not been tested yet for use with hearing aids. It is
important to try the different features of this phone thoroughly
and in different locations, using your hearing aid or cochlear
implant, to determine if you hear any interfering noise. Consult
your service provider or the manufacturer of this phone for
information on hearing aid compatibility. If you have questions
about return or exchange policies, consult your service provider
or phone retailer.
249
M3
M2
T3
T2
Restricting Children's Access to Your
Mobile Device
Your mobile device is not a toy. Do not allow children to play with
it because they could hurt themselves and others, damage the
mobile device, or make calls that increase your mobile device
bill.
Keep the mobile device and all its parts and accessories out of
the reach of small children.
FCC Notice and Cautions
FCC Notice
The mobile device may cause TV or radio interference if used in
close proximity to receiving equipment. The FCC can require you
to stop using the mobile device if such interference cannot be
eliminated. Vehicles using liquefied petroleum gas (such as
propane or butane) must comply with the National Fire Protection
Standard (NFPA-58). For a copy of this standard, contact the
National Fire Protection Association.
Cautions
Any changes or modifications to your mobile device not expressly
approved in this document could void your warranty for this
equipment and void your authority to operate this equipment.
Only use approved batteries, antennas, and chargers. The use of
any unauthorized accessories may be dangerous and void the
mobile device warranty if said accessories cause damage or a
defect to the mobile device. Although your mobile device is quite
sturdy, it is a complex piece of equipment and can be broken.
Avoid dropping, hitting, bending, or sitting on it.
Other Important Safety Information
• Only qualified personnel should service the mobile device or install the
mobile device in a vehicle. Faulty installation or service may be
dangerous and may invalidate any warranty applicable to the device.
• Ensure that any mobile devices or related equipment installed in your
vehicle are securely mounted.
• Check regularly that all wireless mobile device equipment in your
vehicle is mounted and operating properly.
• Do not store or carry flammable liquids, gases, or explosive materials
in the same compartment as the mobile device, its parts, or
accessories.
• For vehicles equipped with an air bag, remember that an air bag
inflates with great force. Do not place objects, including installed or
portable wireless equipment near or in the area over the air bag or in
the air bag deployment area. If wireless equipment is improperly
installed and the air bag inflates, serious injury could result.
• Switch your mobile device off before boarding an aircraft. The use of
wireless mobile devices in aircraft is illegal and may be dangerous to
the aircraft's operation. Check with appropriate authorities before
using any function of a mobile device while on an aircraft.
• Failure to observe these instructions may lead to the suspension or
denial of cell phone services to the offender, or legal action, or both.
Health and Safety Information
250
• If the phone, battery, charger or any accessory is not working properly,
take it to your nearest qualified service facility. The personnel there
will assist you, and if necessary, arrange for service.
• Dispose of phones in accordance with local regulations. In some areas,
the disposal of phones in household or business trash may be
prohibited. For safe disposal options for phones, contact your nearest
Samsung authorized service center.
251
Section 14: Warranty Information
Standard Limited Warranty
What is Covered and For How Long?
SAMSUNG TELECOMMUNICATIONS AMERICA, LLC ("SAMSUNG")
warrants that SAMSUNG's handsets and accessories
("Products") are free from defects in material and workmanship
under normal use and service for the period commencing upon
the date of purchase by the first consumer purchaser and
continuing for the following specified period of time after that
date:
Phone
1 Year
Batteries
1 Year
Case/Pouch/Holster
90 Days
Other Phone Accessories
1 Year
What is Not Covered?
This Limited Warranty is conditioned upon proper use of the Product.
This Limited Warranty does not cover: (a) defects or damage resulting
from accident, misuse, abnormal use, abnormal conditions, improper
storage, exposure to liquid, moisture, dampness, sand or dirt, neglect, or
unusual physical, electrical or electromechanical stress; (b) scratches,
dents and cosmetic damage, unless caused by SAMSUNG; (c) defects or
damage resulting from excessive force or use of a metallic object when
pressing on a touch screen; (d) equipment that has the serial number or
the enhancement data code removed, defaced, damaged, altered or
made illegible; (e) ordinary wear and tear; (f) defects or damage
resulting from the use of Product in conjunction or connection with
accessories, products, or ancillary/peripheral equipment not furnished or
approved by SAMSUNG; (g) defects or damage resulting from improper
testing, operation, maintenance, installation, service, or adjustment not
furnished or approved by SAMSUNG; (h) defects or damage resulting
from external causes such as collision with an object, fire, flooding, dirt,
windstorm, lightning, earthquake, exposure to weather conditions, theft,
blown fuse, or improper use of any electrical source; (i) defects or
damage resulting from cellular signal reception or transmission, or
viruses or other software problems introduced into the Product; or (j)
Product used or purchased outside the United States. This Limited
Warranty covers batteries only if battery capacity falls below 80% of
rated capacity or the battery leaks, and this Limited Warranty does not
cover any battery if (i) the battery has been charged by a battery charger
not specified or approved by SAMSUNG for charging the battery; (ii) any
of the seals on the battery are broken or show evidence of tampering; or
(iii) the battery has been used in equipment other than the SAMSUNG
phone for which it is specified.
Warranty Information
252
What are SAMSUNG's Obligations?
During the applicable warranty period, provided the Product is
returned in accordance with the terms of this Limited Warranty,
SAMSUNG will repair or replace the Product, at SAMSUNG'S sole
option, without charge. SAMSUNG may, at SAMSUNG's sole
option, use rebuilt, reconditioned, or new parts or components
when repairing any Product, or may replace the Product with a
rebuilt, reconditioned or new Product. Repaired/replaced cases,
pouches and holsters will be warranted for a period of ninety (90)
days. All other repaired/replaced Products will be warranted for
a period equal to the remainder of the original Limited Warranty
on the original Product or for ninety (90) days, whichever is
longer. All replaced Products, parts, components, boards and
equipment shall become the property of SAMSUNG. Except to
any extent expressly allowed by applicable law, transfer or
assignment of this Limited Warranty is prohibited.
What must you do to obtain warranty service?
To obtain service under this Limited Warranty, you must return
the Product to an authorized phone service facility in an adequate
container for shipping, accompanied by the sales receipt or
comparable proof of sale showing the original date of purchase,
the serial number of the Product and the seller's name and
address. To obtain assistance on where to deliver the Product,
please call SAMSUNG Customer Care at 1-888-987-4357. If
253
SAMSUNG determines that any Product is not covered by this
Limited Warranty, you must pay all parts, shipping, and labor
charges for the repair or return of such Product.
You should keep a separate backup copy of any contents of the
Product before delivering the Product to SAMSUNG for warranty
service.
What Are The Limits On SAMSUNG’s liability?
THIS LIMITED WARRANTY SETS OUT THE FULL EXTENT OF SAMSUNG'S
RESPONSIBILITIES, AND THE EXCLUSIVE REMEDY REGARDING THE
PRODUCTS. ALL IMPLIED WARRANTIES, INCLUDING WITHOUT
LIMITATION, IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
FOR A PARTICULAR PURPOSE, ARE LIMITED TO THE DURATION OF THIS
LIMITED WARRANTY. IN NO EVENT SHALL SAMSUNG BE LIABLE FOR
DAMAGES IN EXCESS OF THE PURCHASE PRICE OF THE PRODUCT OR
FOR, WITHOUT LIMITATION, COMMERCIAL LOSS OF ANY SORT; LOSS OF
USE, TIME, DATA, REPUTATION, OPPORTUNITY, GOODWILL, PROFITS OR
SAVINGS; INCONVENIENCE; INCIDENTAL, SPECIAL, CONSEQUENTIAL OR
PUNITIVE DAMAGES; OR DAMAGES ARISING FROM THE USE OR
INABILITY TO USE THE PRODUCT. SOME STATES AND JURISDICTIONS
DO NOT ALLOW LIMITATIONS ON HOW LONG AN IMPLIED WARRANTY
LASTS, OR THE DISCLAIMER OR LIMITATION OF INCIDENTAL OR
CONSEQUENTIAL DAMAGES, SO THE ABOVE LIMITATIONS AND
DISCLAIMERS MAY NOT APPLY TO YOU.
SAMSUNG MAKES NO WARRANTIES OR REPRESENTATIONS, EXPRESS
OR IMPLIED, STATUTORY OR OTHERWISE, AS TO THE QUALITY,
CAPABILITIES, OPERATIONS, PERFORMANCE OR SUITABILITY OF ANY
THIRD-PARTY SOFTWARE OR EQUIPMENT USED IN CONJUNCTION WITH
THE PRODUCT, OR THE ABILITY TO INTEGRATE ANY SUCH SOFTWARE OR
EQUIPMENT WITH THE PRODUCT, WHETHER SUCH THIRD-PARTY
SOFTWARE OR EQUIPMENT IS INCLUDED WITH THE PRODUCT
DISTRIBUTED BY SAMSUNG OR OTHERWISE. RESPONSIBILITY FOR THE
QUALITY, CAPABILITIES, OPERATIONS, PERFORMANCE AND SUITABILITY
OF ANY SUCH THIRD-PARTY SOFTWARE OR EQUIPMENT RESTS SOLELY
WITH THE USER AND THE DIRECT VENDOR, OWNER OR SUPPLIER OF
SUCH THIRD-PARTY SOFTWARE OR EQUIPMENT.
Nothing in the Product instructions or information shall be construed to
create an express warranty of any kind with respect to the Products. No
agent, employee, dealer, representative or reseller is authorized to
modify or extend this Limited Warranty or to make binding
representations or claims, whether in advertising, presentations or
otherwise, on behalf of SAMSUNG regarding the Products or this Limited
Warranty.
This Limited Warranty gives you specific legal rights, and you may also
have other rights that vary from state to state.
What is the procedure for resolving disputes?
ALL DISPUTES WITH SAMSUNG ARISING IN ANY WAY FROM THIS
LIMITED WARRANTY OR THE SALE, CONDITION OR
PERFORMANCE OF THE PRODUCTS SHALL BE RESOLVED
EXCLUSIVELY THROUGH FINAL AND BINDING ARBITRATION, AND
NOT BY A COURT OR JURY. Any such dispute shall not be
combined or consolidated with a dispute involving any other
person's or entity's Product or claim, and specifically, without
limitation of the foregoing, shall not under any circumstances
proceed as part of a class action. The arbitration shall be
conducted before a single arbitrator, whose award may not
exceed, in form or amount, the relief allowed by the applicable
law. The arbitration shall be conducted according to the
American Arbitration Association (AAA) Commercial Arbitration
Rules applicable to consumer disputes. This arbitration provision
is entered pursuant to the Federal Arbitration Act. The laws of
the State of Texas, without reference to its choice of laws
principles, shall govern the interpretation of the Limited Warranty
and all disputes that are subject to this arbitration provision. The
arbitrator shall decide all issues of interpretation and application
of this arbitration provision and the Limited Warranty.
For any arbitration in which your total damage claims, exclusive
of attorney fees and expert witness fees, are $5,000.00 or less
("Small Claim"), the arbitrator may, if you prevail, award your
reasonable attorney fees, expert witness fees and costs as part
Warranty Information
254
of any award, but may not grant SAMSUNG its attorney fees,
expert witness fees or costs unless it is determined that the claim
was brought in bad faith. In a Small Claim case, you shall be
required to pay no more than half of the total administrative,
facility and arbitrator fees, or $50.00 of such fees, whichever is
less, and SAMSUNG shall pay the remainder of such fees.
Administrative, facility and arbitrator fees for arbitrations in
which your total damage claims, exclusive of attorney fees and
expert witness fees, exceed $5,000.00 ("Large Claim") shall be
determined according to AAA rules. In a Large Claim case, the
arbitrator may grant to the prevailing party, or apportion among
the parties, reasonable attorney fees, expert witness fees and
costs. Judgment may be entered on the arbitrator's award in any
court of competent jurisdiction.
number; and (d) the IMEI or MEID or Serial Number, as applicable, if
you have it (the IMEI or MEID or Serial Number can be found (i) on
the Product box; (ii) on the Product information screen, which can
be found under "Settings;" (iii) on a label on the back of the
Product beneath the battery, if the battery is removable; and (iv) on
the outside of the Product if the battery is not removable).
Alternatively, you may opt out by calling 1-888-987-4357 no later
than 30 calendar days from the date of the first consumer
purchaser's purchase of the Product and providing the same
information. These are the only two forms of notice that will be
effective to opt out of this dispute resolution procedure. Opting out
of this dispute resolution procedure will not affect the coverage of
the Limited Warranty in any way, and you will continue to enjoy the
benefits of the Limited Warranty.
This arbitration provision also applies to claims against
SAMSUNG'S employees, representatives and affiliates if any
such claim arises from the Product's sale, condition or
performance.
Severability
You may opt out of this dispute resolution procedure by providing
notice to SAMSUNG no later than 30 calendar days from the date of
the first consumer purchaser's purchase of the Product. To opt out,
you must send notice by e-mail to optout@sta.samsung.com, with
the subject line: "Arbitration Opt Out." You must include in the opt
out e-mail (a) your name and address; (b) the date on which the
Product was purchased; (c) the Product model name or model
Samsung Telecommunications America, LLC
1301 E. Lookout Drive
Richardson, Texas 75082
Phone: 1-800-SAMSUNG
Phone: 1-888-987-HELP (4357)
255
If any portion of this Limited Warranty is held to be illegal or
unenforceable, such partial illegality or unenforceability shall not
affect the enforceability of the remainder of the Limited Warranty.
©
2011 Samsung Telecommunications America, LLC. All rights reserved.
No reproduction in whole or in part allowed without prior written
approval. Specifications and availability subject to change without
notice. [060111]
End User License Agreement for Software
IMPORTANT. READ CAREFULLY: This End User License Agreement
("EULA") is a legal agreement between you (either an individual
or a single entity) and Samsung Electronics Co., Ltd. for software
owned by Samsung Electronics Co., Ltd. and its affiliated
companies and its third party suppliers and licensors that
accompanies this EULA, which includes computer software and
may include associated media, printed materials, "online" or
electronic documentation ("Software"). BY CLICKING THE "I
ACCEPT" BUTTON (OR IF YOU BYPASS OR OTHERWISE DISABLE
THE "I ACCEPT", AND STILL INSTALL, COPY, DOWNLOAD,
ACCESS OR OTHERWISE USE THE SOFTWARE), YOU AGREE TO
BE BOUND BY THE TERMS OF THIS EULA. IF YOU DO NOT
ACCEPT THE TERMS IN THIS EULA, YOU MUST CLICK THE
"DECLINE" BUTTON, AND DISCONTINUE USE OF THE SOFTWARE.
1. GRANT OF LICENSE. Samsung grants you the following rights
provided that you comply with all terms and conditions of this
EULA: You may install, use, access, display and run one copy of
the Software on the local hard disk(s) or other permanent storage
media of one computer and use the Software on a single
computer or a mobile device at a time, and you may not make
the Software available over a network where it could be used by
multiple computers at the same time. You may make one copy of
the Software in machine-readable form for backup purposes
only; provided that the backup copy must include all copyright or
other proprietary notices contained on the original.
2. RESERVATION OF RIGHTS AND OWNERSHIP. Samsung reserves
all rights not expressly granted to you in this EULA. The Software
is protected by copyright and other intellectual property laws and
treaties. Samsung or its suppliers own the title, copyright and
other intellectual property rights in the Software. The Software is
licensed, not sold.
3. LIMITATIONS ON END USER RIGHTS. You may not reverse
engineer, decompile, disassemble, or otherwise attempt to
discover the source code or algorithms of, the Software (except
and only to the extent that such activity is expressly permitted by
applicable law notwithstanding this limitation), or modify, or
disable any features of, the Software, or create derivative works
based on the Software. You may not rent, lease, lend, sublicense
or provide commercial hosting services with the Software.
4. CONSENT TO USE OF DATA. You agree that Samsung and its
affiliates may collect and use technical information gathered as
part of the product support services related to the Software
provided to you, if any, related to the Software. Samsung may
use this information solely to improve its products or to provide
Warranty Information
256
customized services or technologies to you and will not disclose
this information in a form that personally identifies you.
5. UPGRADES. This EULA applies to updates, supplements and
add-on components (if any) of the Software that Samsung may
provide to you or make available to you after the date you obtain
your initial copy of the Software, unless we provide other terms
along with such upgrade. To use Software identified as an
upgrade, you must first be licensed for the Software identified by
Samsung as eligible for the upgrade. After upgrading, you may
no longer use the Software that formed the basis for your
upgrade eligibility.
6. SOFTWARE TRANSFER. You may not transfer this EULA or the
rights to the Software granted herein to any third party unless it
is in connection with the sale of the mobile device which the
Software accompanied. In such event, the transfer must include
all of the Software (including all component parts, the media and
printed materials, any upgrades, this EULA) and you may not
retain any copies of the Software. The transfer may not be an
indirect transfer, such as a consignment. Prior to the transfer, the
end user receiving the Software must agree to all the EULA
terms.
7. EXPORT RESTRICTIONS. You acknowledge that the Software is
subject to export restrictions of various countries. You agree to
comply with all applicable international and national laws that
257
apply to the Software, including the U.S. Export Administration
Regulations, as well as end user, end use, and destination
restrictions issued by U.S. and other governments.
8. TERMINATION. This EULA is effective until terminated. Your
rights under this License will terminate automatically without
notice from Samsung if you fail to comply with any of the terms
and conditions of this EULA. Upon termination of this EULA, you
must cease all use of the Software and destroy all copies, full or
partial, of the Software.
9. THIRD-PARTY APPLICATIONS. Certain third-party applications
may be included with, or downloaded to this mobile device.
SAMSUNG makes no representations whatsoever about any of
these applications. Since SAMSUNG has no control over such
applications, Purchaser acknowledges and agrees that
SAMSUNG is not responsible for the availability of such
applications and is not responsible or liable for any content,
advertising, products, services, or other materials on or available
from such applications. Purchaser expressly acknowledges and
agrees that use of third-party applications is at Purchaser's sole
risk and that the entire risk of unsatisfactory quality,
performance, accuracy and effort is with Purchaser. It is up to
Purchaser to take precautions to ensure that whatever Purchaser
selects to use is free of such items as viruses, worms, Trojan
horses, and other items of a destructive nature. References on
this mobile device to any names, marks, products, or services of
any third-parties are provided solely as a convenience to
Purchaser, and do not constitute or imply an endorsement,
sponsorship, or recommendation of, or affiliation with the thirdparty or its products and services. Purchaser agrees that
SAMSUNG shall not be responsible or liable, directly or indirectly,
for any damage or loss caused or alleged to caused by, or in
connection with, use of or reliance on any such third-party
content, products, or services available on or through any such
application. Purchaser acknowledges and agrees that your use
of any third-party application is governed by such third-party
application provider's Terms of Use, License Agreement, Privacy
Policy, or other such agreement and that any information or
personal data you provide, whether knowingly or unknowingly, to
such third-party application provider, will be subject to such
third-party application provider's privacy policy, if such a policy
exists. SAMSUNG DISCLAIMS ANY RESPONSIBILITY FOR ANY
DISCLOSURE OF INFORMATION OR ANY OTHER PRACTICES OF
ANY THIRD-PARTY APPLICATION PROVIDER.
10. Disclaimer of Warranty Regarding Third-Party Applications.
SAMSUNG DOES NOT WARRANT OR MAKE ANY
REPRESENTATIONS REGARDING THE AVAILABILITY, USE,
TIMELINESS, SECURITY, VALIDITY, ACCURACY, OR RELIABILITY OF,
OR THE RESULTS OF THE USE OF, OR OTHERWISE RESPECTING,
THE CONTENT OF ANY THIRD-PARTY APPLICATION WHETHER
SUCH THIRD-PARTY APPLICATION IS INCLUDED WITH THE
PRODUCT DISTRIBUTED BY SAMSUNG, IS DOWNLOADED, OR
OTHERWISE OBTAINED. USE OF ANY THIRD-PARTY APPLICATION
IS DONE AT PURCHASER'S OWN DISCRETION AND RISK AND
PURCHASER IS SOLELY RESPONSIBLE FOR ANY DAMAGE TO
YOUR MOBILE DEVICE OR LOSS OF DATA THAT RESULTS FROM
THE DOWNLOADING OR USE OF SUCH THIRD-PARTY
APPLICATIONS. SAMSUNG EXPRESSLY DISCLAIMS ANY
WARRANTY REGARDING WHETHER PURCHASER'S PERSONAL
INFORMATION IS CAPTURED BY ANY THIRD-PARTY APPLICATION
PROVIDER OR THE USE TO WHICH SUCH PERSONAL
INFORMATION MAY BE PUT BY SUCH THIRD-PARTY APPLICATION
PROVIDER. ANY THIRD-PARTY APPLICATIONS PROVIDED WITH
THIS MOBILE DEVICE ARE PROVIDED "AS IS" AND ON AN "AS
AVAILABLE" BASIS, WITHOUT WARRANTIES OF ANY KIND FROM
SAMSUNG, EITHER EXPRESS OR IMPLIED. TO THE FULLEST
EXTENT POSSIBLE PURSUANT TO APPLICABLE LAW, SAMSUNG
DISCLAIMS ALL WARRANTIES EXPRESS, IMPLIED, OR
STATUTORY, INCLUDING, BUT NOT LIMITED TO, IMPLIED
WARRANTIES OF MERCHANTABILITY, SATISFACTORY QUALITY OR
WORKMANLIKE EFFORT, FITNESS FOR A PARTICULAR PURPOSE,
RELIABILITY OR AVAILABILITY, ACCURACY, LACK OF VIRUSES,
QUIET ENJOYMENT, NON-INFRINGEMENT OF THIRD PARTY
RIGHTS OR OTHER VIOLATION OF RIGHTS. SAMSUNG DOES NOT
WARRANT AGAINST INTERFERENE WITH YOUR ENJOYMENT OF
THE THRID-PARTY APPLICATION, THAT THE FUNCTIONS
Warranty Information
258
CONTAINED IN THE THIRD-PARTY APPLICATION WILL MEET
PURCHASER'S REQUIREMENTS, THAT THE OPERATION OF THE
THIRD-PARTY APPLICATION WILL BE UNINTERRUPTED OR
ERROR-FREE, OR THAT DEFECTS IN THE THIRD-PARTY
APPLICATION WILL BE CORRECTED. PURCHASER ASSUMES THE
ENTIRE COST OF ALL NECESSARY SERVICING, REPAIR, OR
CORRECTION. SOME JURISDICTIONS DO NOT ALLOW
EXCLUSIONS OR LIMITATIONS ON HOW LONG AN IMPLIED
WARRANTY LASTS, SO THE ABOVE LIMITATIONS OR EXCLUSIONS
MAY NOT APPLY TO YOU. NO ADVICE OR INFORMATION,
WHETHER ORAL OR WRITTEN, OBTAINED BY PURCHASER FROM
SAMSUNG SHALL BE DEEMED TO ALTER THIS DISCLAIMER OF
WARRANTY REGARDING THIRD-PARTY APPLICATIONS, OR TO
CREATE ANY WARRANTY.
11. Limitation of Liability. SAMSUNG WILL NOT BE LIABLE FOR
ANY DAMAGES OF ANY KIND ARISING OUT OF OR RELATING TO
THE USE OR THE INABILITY TO USE ANY THIRD-PARTY
APPLICATION, ITS CONTENT OR FUNCTIONALITY, INCLUDING BUT
NOT LIMITED TO DAMAGES CAUSED BY OR RELATED TO
ERRORS, OMISSIONS, INTERRUPTIONS, DEFECTS, DELAY IN
OPERATION OR TRANSMISSION, COMPUTER VIRUS, FAILURE TO
CONNECT, NETWORK CHARGES, AND ALL OTHER DIRECT,
INDIRECT, SPECIAL, INCIDENTAL, EXEMPLARY, OR
CONSEQUENTIAL DAMAGES EVEN IF SAMSUNG HAS BEEN
ADVISED OF THE POSSIBILITY OF SUCH DAMAGES. SOME
259
JURISDICTIONS DO NOT ALLOW THE EXCLUSION OR LIMITATION
OF INCIDENTAL OR CONSEQUENTIAL DAMAGES, SO THE ABOVE
LIMITATION OR EXCLUSION MAY NOT APPLY TO YOU.
NOTWITHSTANDING THE FOREGOING, SAMSUNG'S TOTAL
LIABILITY TO PURCHASER FOR ALL LOSSES, DAMAGES, CAUSES
OF ACTION, INCLUDING BUT NOT LIMITED TO THOSE BASED ON
CONTRACT, TORT, OR OTHERWISE, ARISING OUT OF
PURCHASER'S USE OF THIRD-PARTY APPLICATIONS ON THIS
MOBILE DEVICE, OR ANY OTHER PROVISION OF THIS EULA,
SHALL NOT EXCEED THE AMOUNT PURCHASER PAID
SPECIFICALLY FOR ANY SUCH THIRD-PARTY APPLICATION THAT
WAS INCLUDED WITH THIS MOBILE DEVICE. THE FOREGOING
LIMITATIONS, EXCLUSIONS, AND DISCLAIMERS (INCLUDING
SECTIONS 9, 10, AND 11) SHALL APPLY TO THE MAXIMUM
EXTENT PERMITTED BY APPLICABLE LAW, EVEN IF ANY REMEDY
FAILS ITS ESSENTIAL PURPOSE.
12. U.S. GOVERNMENT END USERS. The Software is licensed
only with "restricted rights" and as "commercial items"
consisting of "commercial software" and "commercial software
documentation" with only those rights as are granted to all other
end users pursuant to the terms and conditions herein.
13. APPLICABLE LAW. This EULA is governed by the laws of
TEXAS, without regard to conflicts of laws principles. This EULA
shall not be governed by the UN Convention on Contracts for the
International Sale of Goods, the application of which is expressly
excluded. If a dispute, controversy or difference is not amicably
settled, it shall be finally resolved by arbitration in Seoul, Korea in
accordance with the Arbitration Rules of the Korean Commercial
Arbitration Board. The award of arbitration shall be final and
binding upon the parties.
14. ENTIRE AGREEMENT; SEVERABILITY. This EULA is the entire
agreement between you and Samsung relating to the Software
and supersedes all prior or contemporaneous oral or written
communications, proposals and representations with respect to
the Software or any other subject matter covered by this EULA. If
any provision of this EULA is held to be void, invalid,
unenforceable or illegal, the other provisions shall continue in full
force and effect.
Precautions for Transfer and Disposal
If data stored on this device is deleted or reformatted using the
standard methods, the data only appears to be removed on a
superficial level, and it may be possible for someone to retrieve
and reuse the data by means of special software.
To avoid unintended information leaks and other problems of this
sort, it is recommended that the device be returned to Samsung’s
Customer Care Center for an Extended File System (EFS) Clear
which will eliminate all user memory and return all settings to
default settings. Please contact the Samsung Customer Care
Center for details.
Important!: Please provide warranty information (proof of purchase) to
Samsung’s Customer Care Center in order to provide this service
at no charge. If the warranty has expired on the device, charges
may apply.
Customer Care Center:
1000 Klein Rd.
Plano, TX 75074
Toll Free Tel: 1.888.987.HELP (4357)
Samsung Telecommunications America, LLC:
1301 East Lookout Drive
Richardson, Texas 75082
Phone: 1-800-SAMSUNG (726-7864)
Important!: If you are using a handset other than a standard numeric keypad,
dial the numbers listed in brackets.
Phone: 1-888-987-HELP (4357)
©
2011 Samsung Telecommunications America. All rights
reserved.
No reproduction in whole or in part allowed without prior written
approval. Specifications and availability subject to change
without notice.
Warranty Information
260
Index
Numerics
2G Network
Using 201
3 Sec Pause
Adding 57
3G Network 201
Using 201
411 & More 140
4G 188, 198
4G Network 201
Using 201
Accessing
Recently-used applications 37
Voice mail 17
Accounts 140
Accounts and Sync 140
Adding Contacts 96
Add 3 Sec Pause 60
Add to Favorites 101
Adjusting
Call volume 64
261
Adobe PDF 163
Alarm
Setting 191
Turning Off 192
Alarm Tone
Set as 137
Alerts on Call 203
AllShare
Configuring Settings 141
Receiving Media 142
Transmitting Media 142
Answer Vibration 203
Answering a call 57
Answering Key 203
Application cache and data
Clearing 153
Application Menus
Navigating through 35
Applications 37
411 & More 37
Accounts and Sync 37
AllShare 37
Android Market 40, 151
Asphalt 37
Blio 38
Bonus Apps 38
Browser 44, 171
Calculator 38, 143
Calendar 38
Camera 38, 145
Clock 39
Contacts 38
Downloads 39
Email 39, 145
Files 39
Gallery 39
Google Books 38
Google Mail 39, 146
Google Maps 40, 149
Google Search 39
IM 40
Kies air 40
Latitude 40
Lookout 40
Media Hub 40
Memo 41, 154
Messaging 41
messaging 155
More for Me 41
Music 41
My Device 41
Navigation 41
Netflix 41
News & Weather 42
Photo Editor 42
Places 42
Polaris Office 42
Pro Apps 42
Settings 42
Slacker 42
Social Hub 42
Tags 43
Task 43
Task Manager 43
TeleNav GPS 43, 167
T-Mobile Mall 42
T-Mobile Name ID 43
T-Mobile TV 43
Using the Camcorder 126
Using the Camera 119
Utility 43
Video Chat 43
Video Player 169
Videos 44
Visual Voicemail 44
Voice Command 44
Voice Recorder 44, 170
Voice Search 44, 170
Voice Talk 44
YouTube 44, 171
Zinio Reader 45
Applications and Development 140
Asphalt 6 142
Audio Output Mode 228
Auto Redial 205
Auto Reject
Configuration 58
Auto Reject List 202
Auto Reject Mode 202
Automatic Answering 203
Auto-sync
Enabling 219
Back up
My Data 221
Backup and Restore 221
Battery
Charging 11
Extending Life 13
Installing 10
Low Battery Indicator 12
Removal 10
Saving Power 13
Wall Charger 11
Battery Cover
Removal 7
Replace 8
Battery Life
Extending 13
Battery Usage 218
Battery Use & Safety 238
Bing
Set Search Engine 178
Blacklist 70
Add To 58
Adding 90
Blio 142
Bluetooth 196
About 179
Activation 196
262
Change Name 180
Deleting a Paired Device 181
Device Name 197
Disable 179
Disconnecting a Paired Device 181
Enable 179
Paring Devices 180
Scan for Devices 180
Scanning for other Devices 197
Sending Contact Information 181
Sending Contacts Via 181
Sending Namecard 93
Set Visibility 180
Settings 179
Status indicators 179
Switching to Headset during call 65
Turning on and off 179
Visibility 197
Visible Time-Out 180
Bonus Apps 142
Books 143
Sync Google Books 220
Browser
Adding bookmarks 176
Deleting bookmarks 176
263
Emptying cookies 177
Entering a URL 174
Navigation 174
Options 174
Search Engine 178
Settings 177
Bubble
Options 105
Calculator
Scientific Functions 143
Calendar 190
Creating an event 190
Manually Sync Events 144
Settings 190
Calibration 209, 210
Call Alert 203
Call Answering/Ending 203
Call Barring 204
Call Forwarding 203
Configuring 203
Call Functions 54
Answering 57
Ending 55
Ending a Call 55
Ending via Status Bar 55
Making a Multi-Party Call 65
Pause Dialing 60
Redialing the last number 61
Wait dialing 61
Call Rejection 58, 202
Call Settings 202
Additional Settings 204
General 202
Call Status Tones 203
Call Volume
Adjusting 64
Call Waiting 67, 204
Caller ID 204
Caller Ringtone
Set as 137
Calls
Making a 54
Multi-party 65
Muting 65
Camcorder 126
Accessing the Video Folder 129
Options 127
Shooting Video 126
Camera 119
Camera Options 120
Taking Pictures 119
Care and Maintenance 243
Charging battery 11
Children and Cell Phones 234
Clearing
Application cache and data 153
Configuration
Initial 14
Connections
Accessing the Internet 173
Contact
Copying to microSD Card 94
Copying to SIM Card 94
Creating a New 84
Joining 91
New From Keypad 85
Contact Entry
Options 90
Contact List
Options 89
Contact Menus
Options 90
Contacts
Adding a Number to Existing 88
Adding Your Facebook Friends 96
Additional Options 98
Default Storage Location 98
Deleting 88
Display Options 95
Displaying Contacts by Name 95
Export List to microSD 183, 222
Family Name First 95
Filtering 96
Given Name First 95
Groups 99
Merge with Google 89
Reject List 90
Send Namecard Via 90
Sending 93
Sending All 93
Setting Default Location 89
Settings 98
Contacts List 54
Context Menus 87, 90
Navigation 36
Using 36
Cookies
Emptying 177
Copying Contact 94
Corporate Email
Account Syncronization 220
Add Account 220
Creating a Playlist 137
Creating and sending
Messages 102
Customizing
Home screens 45
Data Roaming 200
Activate/Deactivate 200
Deleting
Message Thread 106
Multiple messages 106
Single message 106
Deleting a contact 88
Desk Clock
Configuring 193
Disconnect Storage 52
Display
Icons 23
Settings 23
264
Status Bar 23
Display / Touch-Screen 241
Displaying your phone number 54
DivX
Locating VOD Number 132
Overview 132
Registering Your DivX Device 132
Registration Code 229
Do cell phones pose a health hazard?
231
Downloading
New application 152
Downloads 145
Internet Downloads 145
Other Downloads 145
EDGE Network 201
Email 108
Composing 110
Configuring Settings 111
Creating an Internet Account 109
Internet Email 109
Opening 110
Opening Internet Email 110
Refreshing Messages 110
265
Sending 98
Emergency Calls 243
Making 55
With SIM 56
Without SIM 56
Emoticons 103
Ending
A call 55
Entering Text 72
Using SWYPE 73
Erasing files from
Memory card 53
Event Notifications 208
Exchange Email 111
Account Setup 112
Composing 113
Configuring Settings 114
Deleting Message 114
Opening 113
Refreshing Messages 113
Exposure to RF Signals 231
Facebook
Video Chat 168
Factory Data Reset 222
Prior To 222
Factory data reset 53
Favorites Tab 101
FCC Hearing Aid Compatibility (HAC)
Regulations for Wireless Devices 248
FCC Notice and Cautions 250
Fixed Dialing Numbers 205
Folder
Creating and Managing 49
Deleting 49
Renaming 49
Font
Style 208
Font Size
Caption 171
Friends
Viewing 89
Gallery
Folder Options 124
Image Options 124
Opening 131
Getting Started 6
Battery 10
Battery Cover 7
Locking/Unlocking the Device 15
microSD card 9
SIM Card 8
Switching Device On/Off 14
Voice Mail 16
Gmail 115, 146
Composing a message 116
Creating and Additional Account
117
Opening 116
Refreshing 116
Signing In 115
Viewing 116
Google
Account Management Settings 220
Account Syncronization 219
Add Account 219
Adding a Sync Account 219
Create New Account 15
Merge Contacts 89
Retrieving Password 16
Set Search Engine 178
Signing into Your Account 16
Google Books 143
Google mail
see also Gmail 116
Google Maps
Enabling a location source 150
Opening a map 150
Google Talk 43, 166
GPS & AGPS 241
Groups
Adding an Member to an Existing
Group 99
Creating a new caller group 99
Deleting 100
Deleting a Caller Group 100
Editing a Caller Group 100
Removing an Entry 99
Settings 100
GSM 200
Gyro Sensor Calibration 210
Gyroscope
Calibration 209, 210
Health and Safety Information 231
Hold
Placing a call on hold 64
Home 31
Home Key 28
Home Screen
Overview 31
Wallpaper 208
Home screens
Customizing 45
Horizontal Calibration 209, 210
HSPA+ 188, 198
Icons
Description 23
Indicator 23
Status 23
IM 118, 146
Images
Assigning as a Contact icon 126
Assigning as wallpaper 126
Transferring 184, 222
Verifying 184, 222
266
Importing and Exporting
To SIM card 98
In call
Options 63, 65
Incoming Call Volume
Setting 207
Indicator icons 23
Instant Messaging 118
International Call 60
International calls
Making 60
Internet 173
Search 175
Internet Call 85
Internet Downloads 145
Internet Email 108
Joining
Contact information 91
Kies Air
Before Using 183
Kies air 147
267
LinkedIn
Adding Contacts From 96
Live Wallpapers 208
Lock Screen
Clock Position 208
Event Notifications 208
Viewing Missed Calls 71
Wallpaper 208
Logs 68
Accessing 68
Accessing from Notifications 69
Altering Numbers 70
Erasing 71
Low battery indicator 12
Making
Emergency Calls 55
International calls 60
New call 54
Managing Applications 216
Clearing Application Cache 216
Moving Third-party Applications to
Card 217
Uninstalling Third-party Applications
216
Market 151
Marking contact
As a default 92
Mass Storage 52, 183, 197
Media Hub 134, 154
Creating a New Account 134
Using 134
Media Volume
Setting 207
Memo
Options 154
Memory card
Erasing files from the 53
Memory Usage 218
Merge Calls 66
Merge with Google 89
Message
Options 103
Read 104
Reply 105
Thread Options 105
Threads 104
Message Search 106
Message threads 104
Messaging
Creating and sending 102
Creating and Sending Text
Messages 102
Deleting a message 106
Google Mail 115
Icons on the Status Bar 102
Insert Smiley 103
Options 103
Settings 106
Signing into Google Mail 115
Text Templates 108
Types of Messages 102
Viewing new 104
microSD Card
Insertion 9
Removal 10
Microsoft Exchange 84, 108
Mini Diary
Deleting an entry 156
Options 156
Settings 156
Missed Call
Viewing from Lock Screen 71
Mobile Networks 200
Data Roaming 200
Mobile NetworksUse Packet Data 200
Mobile Web 173
Entering Text in the Mobile Web
Browser 174
Navigating with the Mobile Web 174
Using Bookmarks 175
Motion Settings 221
Mounting the SD card 52
Move to SD card 217
Multi-Party Call 65
Dropping One Participant 67
Private conversation 66
Multi-party call
Setting up 66
Multi-party calls 65
Music 157
Adding Music 137
Creating a Playlist 137
Editing a Playlist 138
Making a Song a Ringtone 136
Options 137
Player 136
Playing Music 136
Removing Music 138
Using Playlists 137
Music Files
Removing 139
Transferring 138
My Profile 97
Namecard
Send Via 93
Sending 93
Sending All 93
Navigating
Application Menus 35
Sub-Menus 36
Through Screens 33
Netflix 161
Network connection
Adding a new 186
Network Mode
2G Network 201
3G Network 201
New applications
Downloading 152
268
News & Weather 161
NFC
Turning On 166
NFC (Near Field Communication) 199
Noise Reduction 65
Non-Market Applications 153
Notification Bar 26
Using 26
Notification Volume
Setting 207
On/Off Switch 14
Operating Environment 246
Organizer
Calculator 143
World Clock 193
Other Downloads 145
Other Important Safety Information 250
Outlook 108
Synchronizing 220
Overview
Home Screen 31
269
Pause Dialing 60
People
Video Chat 169
Phone
Icons 23
Switching on/off 14
Phone number
Finding 54
Phone Options 206
Phone Ringtone 207
Set as 137
Photo Editor 162
Photos
Options 123, 124
Sharing 123, 124
Pico TTS 227
Polaris Office 163
Power Control 13
Power Saving
LCD Adjustment 209
Power Saving Mode 210
Activate 210
Additional Parameters 211
Setting Launch Levels 210
Power Savings 13
Predictive Text
Using XT9 81
Predictive text
Using XT9 80
Primary Shortcuts 32
Adding and Deleting 46
Proximity Sensor
Activation 203
Quick Dialing 54
Quick Messaging 103
Recently-used Applications
Accessing 37
Redialing the last number 61
Reducing Exposure
Hands-Free Kits and Other
Accessories 234
Reject Call
Rejection Messages 202
Reject Calls
Managing 58
Reject List 70
Adding 90
Rejection List
Assigning Multiple Numbers 58
Assigning Single Numbers 58
Rejection Messages 202
Reset 222
Responsible Listening 244
Restore 221
Restricting Children's Access to Your
Mobile device 249
Ringtone
Phone 207
Samsung Keyboard
Settings 225
XT9 Advanced Settings 225
Samsung Keypad 77
ABC Mode 79
Changing the Input Type 79
Enabling 78
Entering Symbols 80
Symbol/Numeric Mode 80
Samsung Products and Recycling 239
SAR Certification Information 235
Save a Number
From Keypad 85
Screen
Home 31
Navigation 33
Screen Lock
Changing 213
Set Up 212
Screen Rotation
Auto-Rotate 209
Screen Timeout 209
Screens
Adding and Deleting 45
Customizing 45
Rearranging 46
SD card
Connecting to 52
Disconnect Storage 52
Mounting the 52
Unmounting 53
Search Engine 178
Select Language 223
Sending a Namecard 93
Set as
Contact icon 124
Home Screen Wallpaper 124
Lock Screen Wallpaper 124
Setting an alarm 191
Setting up
Voicemail 16
Settings 194
Browser 177
Contact list 98
Display 23
Enabling the GPS Satellites 211
Enabling the sensor aiding 212
Enabling wireless network locations
211
Messaging 106
Mini Diary 156
Setup
Initial 14
Shortcuts
Adding from Application Screen 47
Adding from Home Screen 47
Deleting from a Screen 48
Managing 46
Primary 32
SIM Card
Changing Exisitng PIN 214
Importing and Exporting 98
Insertion 8
270
Lock 214
Removal 9
SIM Card Lock
Setting Up 214
Smart Practices While Driving 237
Snooze 192
SNS 96
SNS Friends
Viewing 89
Social Network
Adding Facebook Contacts 96
Resync 97
Social Networking
Adding Contacts From 96
Song
Set as 137
Speakerphone
Turning on and off 64
Speed Dial
Changing an entry 62
Making a call 63
Removing an entry 63
Setting up entries 62
Standard Limited Warranty 252
271
Status Bar 23
Streaming Movies 161
Sub-Menus
Navigation 36
Switching to a Bluetooth
During a call 65
SWYPE
123ABC Mode 76
Swype
Advanced Settings 73, 224
Entering Text 73
Help 224
Reset Dictionary 74, 224
Settings 73, 224
Tutorial 224
Sync Books 220
System Volume
Setting 207
Tags 166
Task 166
Tethering 187, 198
Activating 188
Active Icon 188
Disconnecting 188
Text Input
Methods 72
Text Input Method
Selecting 72
Text Templates 108
Create Your Own 108
Text To Speech 227
Text-to-speech
Configuration 227
Third-Party Applications 216
Uninstalling 154
Time Management
Calendar 190
T-Mobile Contacts Backup 84
T-Mobile Mall 165
Tools
Camera 119
Transferring Music Files 138
TTS 227
TTY Mode 204
Twitter
Video Chat 168
U
UL Certified Travel Charger 240
Understanding Your Phone 19
Back View 22
Display 22
Features 19
Front View 20
Home 31
Uninstalling
Third-party applications 154
Unknown Sources 153
Unmounting
SD card 53
Usage
Battery 218
Memory 218
USB
Mass Storage 197
Utilities 183, 197
USB Connections
As mass storage device 183
USB Settings
As mass storage device 183
Use GPS Satellites 150, 211
Use Packet Data 200
Use Sensor Aiding 150, 212
Use Wireless Networks 150, 211
Using Favorites
Adding Favorites 176
Deleting a Favorite 176
Editing Favorites 176
Vibration 206
Intensity 208
Setup 206
Video Chat 168
Recording Video 169
Settings 168
Videos
Options 123
Voice Actions 30
Voice Command 170
Using 58
Voice Input Recognition 226
Voice mail
Accessing 17
Accessing from another phone 17
Setting up 16
Voice Talk 170
Voicemail 206
Volume Settings
Adjusting 207
VPN
Adding 198
Settings 198
Wait 61
Wait dialing 61
Wallpapers
Changing 49
Managing 49
Warranty Information 252
WCDMA 200
Web 173
History 177
Web applications
enable downloading 182
Widget
Power Savings 13
Widgets
Adding and Removing 48
Google Talk 43
Mini Diary 41
272
Moving to a Different Screen 48
My Account 41
Settings 42, 164
Stopwatch 193
Wi-Fi
About 185
Activating 185, 194
Advanced settings 187
Connecting to 186
Deactivating 187
Direct Connection 196
Manually Adding Network 195
Manually scan for network 187
Settings 194
Status icons 187
WPS Button 195
Wi-Fi Hotspot 188
Activating 188
Connecting 189
Securing 189
Windows Live Hotmail
Adding Contacts From 96
World Clock
DST Settings 193
273
WPA2 PSK 189
Yahoo! 178
Yahoo! Mail
Adding Contacts From 96
YouTube
High Qulaity 139
Settings 171
Video Chat 169
Zinio Reader 172

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.6
Linearized                      : No
Encryption                      : Standard V4.4 (128-bit)
User Access                     : Print, Extract, Print high-res
Author                          : psalvado
Create Date                     : 2012:05:18 12:20:19-04:00
Modify Date                     : 2012:05:18 12:21:00-04:00
Subject                         : T989
Has XFA                         : No
XMP Toolkit                     : Adobe XMP Core 5.2-c001 63.139439, 2010/09/27-13:37:26
Metadata Date                   : 2012:05:18 12:21-04:00
Creator Tool                    : FrameMaker 9.0
Format                          : application/pdf
Title                           : T-Mobile SGH-T989 Galaxy S II User Manual
Description                     : T989
Creator                         : psalvado
Document ID                     : uuid:e52367f2-3ada-4bb1-9b74-78e0f49114c7
Instance ID                     : uuid:22687285-7d44-4a1f-b006-1c92abc6b9a3
Producer                        : Acrobat Distiller 9.2.0 (Windows)
Page Count                      : 139

EXIF Metadata provided by EXIF.tools