Samsung Electronics Co SGHT999 Cellular/ PCS GSM/ WCDMA and AWS WCDMA Phone with WLAN, Bluetooth and RFID User Manual T Mobile SGH T989 Galaxy S II

Samsung Electronics Co Ltd Cellular/ PCS GSM/ WCDMA and AWS WCDMA Phone with WLAN, Bluetooth and RFID T Mobile SGH T989 Galaxy S II

UserManual.wiki >

Samsung Electronics Co >

SGHT999 User Manual >

Users Manual 2 HTML Version

1. Users Manual 1
2. Users Manual 2

Users Manual 2

135

• TV Store

: displays TV shows that are available for purchase. Scroll

through the movie categories at the top of the screen. Touch a

category and TV shows of that type display.

4. Scroll through the media listings and tap on an item you

would like to purchase or rent.

5. Tap

WATCH PREVIEW

to watch a short preview or tap

Rent

Own

6. Choose a payment method and then follow the on-screen

instructions. The media stores to the

My Media

folder.

Media Hub Notices

•

Any media item (Media Content) may be rented or purchased after you

create an account in Media Hub.

•

Media Content that is downloaded may be viewed concurrently on up

to five (5) devices with Media Hub that are also registered to the same

account.

•

You may choose to remove a device from your account no more than

once every 90 days.

•

You may remove Media Content from a device as many times as you’d

like. You will have the ability to re-download the Media Content at a

later point in time subject to content re-download availability and

studio permissions.

•

You MUST be in network coverage to license Media Content you have

acquired through the Service.

•

You can use 3G, 4G, or Wi-Fi connectivity in order to download Media

Content.

•

Unlike purchased Media Content, rented Media Content will be

viewable on only 1 device in your account.

•

Media Content is downloaded and saved onto the SD card.

•

Your Media Content may pause/stop or not download in networks

where there is a weak signal.

•

You may begin watching downloaded Media Content as soon as a)

license acquisition has occurred and b) sufficient amount of the Media

Content has been buffered.

•

You must finish watching rented Media Content within 24 consecutive

hours of start of playback.

•

Stopping, pausing or restarting rented Media Content does not

extend the available viewing time.

•

In no event will rented Media Content be available for a period of

more than thirty (30) days (or shorter on a title-by-title basis) after

the Media Content has been rented (e.g., if you begin viewing

rented Media Content on the 29th day after the rental transaction,

but do not finish viewing the entire title, that rented Media Content

may not be available for the entire twenty-four (24) consecutive

hour period if such period would extend the viewable time beyond

the thirty (30) day rental window).

•

You cannot play any media content downloaded from Media Hub

through any output on your mobile phone, including All Share.

Multimedia 136

Music

Playing Music

1. From the Home screen, tap (

Applications

)

➔

(

Music

). Music player tips display.

2. Tap

Done

3. Touch a tab to select the music category:

All

Playlists

Albums

, or

Artists

4. Scroll through the list and tap an entry to begin playback.

Note:

The 5.1 channel sound effect works when earphones or sound is

connected through the headset jack only.

5. The following Music Player controls are available:

Making a Song a Phone Ringtone

1. From the Home screen, tap (

Applications

)

➔

(

Music

2. Tap the

All

tab.

3. Touch and hold a song from the list to reveal the

on-screen context menu.

4. Tap

Set as

➔

Phone ringtone.

Pause the song.

Start the song after pausing.

Press and hold to rewind the song. Tap to go to

previous song.

Press and hold to fast-forward the song. Tap to go

to next song.

Volume control.

Allows you to listen to music using 5.1 Virtual

Surround Sound.

Plays the entire song list once.

Replays the current list when the list ends.

Repeats the currently playing song.

shuffles the current list of songs randomly.

songs play in order and are not shuffled.

lists the current playlist songs

displays the current song in the player window

5.1Ch

( ( ) )

List

Now playing

137

Music Player Options

The Music Player Settings menu allows you to set preferences for

the music player such as whether you want the music to play in

the background, sound effects, and how the music menu

displays.

䊳

With the music player application displayed, press

and select one of the following options:

• Add to quick list

: adds the selected music file to a quick playlist.

• Via Bluetooth

: plays the music through a Bluetooth stereo headset.

• Share music via

: shares a music file via AllShare, Bluetooth, Email,

Gmail, Messaging, or Wi-Fi.

• Set as

: sets this song as a Phone ringtone, Caller ringtone, or Alarm

tone.

• Add to playlist

: adds a song to the playlist.

•More:

–

Settings

: allows you to activate or deactivate the Equalizer, Effect,

Music menu, or Visualization. The Music menus allow you to decide

what you want to display. Selections are: Albums, Artists, Genres,

Folders, Composers, Years, Most played, Recently played, or Recently

added. Touch each item that you want to display in the Music menu.

–

Details

: displays details about the selected music.

–

Stop playing music

: stops playing the currently selected song or

playlist.

Using Playlists

Playlists are used to assign music files into groups for playback.

These Playlists can be created using the Music player on this

device, or using a third-party application (such as Windows

Media Player) and downloading those files to an SD card inserted

into the device.

Creating a Playlist

1. From the Home screen, tap (

Applications

)

➔

(

Music

2. Tap the

Playlists

tab.

3. Press and then tap

Create

4. Backspace over the default playlist title and type a new

name for this playlist, then tap

Save

Adding Music to a Playlist

1. From the Home screen, tap (

Applications

)

➔

(

Music

2. Tap the

Playlists

tab.

3. Tap the playlist name in which to add music.

Multimedia 138

4. Press and then tap

Add

– or –

Tap (

Add music

Note:

If a playlist is empty, add a song by touching a holding a song name

from the main screen to open the context menu. Select

Add to playlist

5. Tap a music file, or tap

Select all

to add all the music tracks

to this playlist then tap

Add

Removing Music from a Playlist

1. From the Home screen, tap (

Applications

)

➔

(

Music

2. Tap the

Playlists

tab.

3. Tap the playlist name in which to delete music.

4. Touch and hold a song to reveal the on-screen context

menu.

5. Tap

Remove

➔

OK.

Editing a Playlist

Besides adding and removing music files in a playlist, you can

also share, delete, or rename the playlist.

Only those playlist you have created can be edited. Default

playlists can not be renamed.

1. From the Home screen, tap (

Applications

)

➔

(

Music

2. Tap the

Playlists

tab.

3. Touch and hold a playlist entry to reveal the on-screen

context menu.

4. Tap

Edit title

5. Enter a new name for this playlist and tap

Save

Transferring Music Files

Music files can be downloaded to the phone using one of two

methods:

1. Downloaded to the phone from or Android Market.

Music files are directly stored on your phone.

2. Downloaded to the phone via a direct USB connection.

Music files are stored into a Music folder on the SD card.

For more information, refer to “Connecting to the SD card” on

page 52.

139

Removing Music Files

1. From the Home screen, tap (

Applications

)

➔

(

Music

2. Tap the

All

tab.

3. Touch and hold a song entry to reveal the on-screen

context menu.

4. Tap

Delete

➔

OK.

The music file(s) is deleted.

T-Mobile TV

T-Mobile TV is an application that allows you to get live TV and

Video on Demand.

1. From the Home screen, tap (

Applications

)

➔

(

T-Mobile TV

). The T-Mobile Terms and Conditions

page displays.

Note:

A data plan is required to use this feature. Charges may apply. Please

contact your service provider for further details.

2. Tap

if you accept the Terms and Conditions.

– or –

Tap

Exit

to close the application.

Note:

T-Mobile TV must be initialized over a cellular network before it can be

used. During this initial registration process, any current Wi-Fi

connections must be disabled.

3. Tap

Disable Wi-Fi

if you currently have an active Wi-Fi

connection.

4. Tap

Start Trial

to begin a free 30-day trial of the service.

5. Tap any of the following categories to begin viewing:

Live TV

On Demand

My Media

More Info

Browse

, or

Live

Channels

YouTube

YouTube is a video sharing website on which users can upload

and share videos, and view them in MPEG-4 format.

1. From the Home screen, tap (

Applications

)

➔

(

YouTube

2. Tap

if you accept the Terms and Conditions, or

touch

Exit

3. When the screen loads you can begin searching and

viewing posted videos.

4. Press ➔

Settings

➔

High quality on mobile

if you

prefer high quality output.

Applications and Development 140

Section 9: Applications and Development

This section outlines the various applications that are available

on your phone.

Applications

The Applications list provides quick access to all the available

applications on the phone.

Refer to the application table on page 37 for a description of each

Application, its function, and how to navigate through that

particular application. If the application is already described in

another section of this user manual, then a cross reference to

that particular section is provided.

411 & More

Provides more than just single tap access to directory assistance

and other portals. Available categories include: 411 Directory

Assistance, Current Weather, and more.

1. From the Home screen, tap (

Applications

)

➔

(

411 & More

2. Tap an on-screen option and follow the on-screen

prompts. Choices include: 411 Directory Assistance,

Current Weather, Horoscopes and Sports Report.

Accounts and sync

This application allows you to configure general synchronization

settings that determine whether the background data is

synchronized, and whether you automatically synchronize data

with the phone.

䊳

From the Home screen, tap (

Applications

)

➔

(

Accounts and sync

For more information, refer to “Accounts and Synchronization”

on page 219.

141

AllShare

This application wirelessly synchronizes your Samsung mobile

phone with your TV, streams content and even keeps tabs on

who calls or sends text messages with real-time, on-screen

monitoring. Samsung’s AllShare makes staying connected easy.

Allows users to share their in-device media content with other

external devices using DLNA certified™ (Digital Living Network

Alliance) Devices. These external devices must also be DLNA-

compliant. Wi-Fi capability can be provided to TVs via a digital

multimedia streamer.

Important!:

You must activate Wi-Fi to use this application. For more

information, refer to “Wi-Fi settings” on page 194.

1. From the Home screen, tap (

Applications

)

➔

(

AllShare

2. Follow the on-screen prompts.

The application contains two separate streaming media options:

• My device

allows you to stream/share selected multimedia content

from your device to DLNA compliant device connected to the same

WAP.

• Remote device

allows you to receive and playback media stored

externally (server, laptop, etc.) directly on your device.

Configuring AllShare Settings

The AllShare™ application must first be configured prior to its

initial use. You must setup parameters such as connected Wi-FI,

Items to share, source server address, and external device

acceptance rights.

1. From the Home screen, tap (

Applications

)

➔

(

AllShare

2. Press and then tap

Settings

and configure the

following settings as desired:

• Device name

: defaults to your phone. Use the keypad to enter a

new Media server if desired, and tap

Save

• Share video/picture/audio

: allows you to restrict what is shared

from your phone. Tap the items you want to share.

• Upload from other devices

: allows you set the phone to select

how uploads from other devices are started. Tap

Always accept

Always ask

, or

Always reject

• Default memory

: allows you to have media saved to your

Phone

Memory Card

. Tap an option.

• Subtitles

: allows you to see subtitles on shared media.

Depending on the setting you changed, a pop-up screen

may display to restart AllShare. Tap

Yes

to continue.

Applications and Development 142

Transmitting Media via AllShare

1. Tap the

My device

tab, select

Videos

Photos

, or

Music,

and

then tap on the media that you would like to share.

2. At the

Select device

screen, any devices that you can share

with are displayed.

3. Tap on a device to share media.

Receiving Media via AllShare

1. Tap the

Remote device

tab at the top of the screen.

All devices that you can receive media from are displayed.

2. Tap a device name. Media that you can receive from the

other device is listed.

•

Tap an item that you want to stream to your phone.

3. Press to return to the previous page.

Asphalt 6

Provides access to a built-in HD video game.

1. From the Home screen, tap (

Applications

)

➔

(

Asphalt 6

2. Follow the on-screen prompts.

Blio

Blio is an eReading application that presents eBooks just like the

printed version, in full color, and with all of the features you’d

want from an eReader.

1. From the Home screen, tap (

Applications

)

➔

(

Blio

2. Read the on-screen welcome information and tap

3. Tap an available on-screen option and follow the prompts.

Choose from:

Get

Shop

, and

Read

Bonus Apps

Provides the procedures necessary to install the T-Mobile Bonus

Apps Widget that allows you to discover those applications that

are compatible specifically with your phone.

1. From the Home screen, tap (

Applications

)

➔

(

Bonus Apps

2. Read the Widget installation and tap

3. Once installed, locate the Widget on your screen and tap

Launch

4. Follow the on-screen prompts.

143

Books

Use Google Books to read over 3 million ebooks on the go.

Build your ebooks library in the cloud with Google Books: jump

right into a bestseller or select from nearly 3 million free ebooks.

Personalize the reader to your liking, pick up reading where you

left off on your phone or computer, and settle down with a great

book on your Android phone!

1. From the Home screen, tap (

Applications

)

➔

(

Books

2. If prompted, tap

Turn sync on

. This synchronizes your

books you have previously selected between your Books

account and your device.

3. Tap to begin searching for both free and paid

ebooks.

4. Follow the on-screen prompts to download the ebook to

your phone.

Calculator

Using this feature you can use the phone as a calculator. The

calculator provides the basic arithmetic functions; addition,

subtraction, multiplication, and division. You can also use this as

a scientific calculator.

1. From the Home screen, tap (

Applications

)

➔

(

Utility

) ➔ (

Calculator

2. Enter the first number using the numeric keys.

3. Enter the operation for your calculation by tapping the

Plus,

Minus, Multiplication,

Division

key.

4. Enter the next number.

5. To view the result, tap the

(equals)

key.

6. Repeat steps 1 to 4 as many times as required.

Note:

Place the screen in Landscape mode to reveal additional scientific

functions.

Applications and Development 144

Calendar

With the Calendar feature, you can consult the calendar by day,

week, or month, create events, and set an alarm to act as a

reminder. Google Calendar is built into the phone and

synchronizes both new and existing entries between your phone

and your online Google account.

Important!:

You must have previously added an account (Facebook, Microsoft

Exchange ActiveSync, or Google) prior to using the Calendar.

1. From the Home screen, tap (

Applications

)

➔

(

Calendar

). The Calendar displays four tabs:

• Month

: displays the Month view.

•Week

: displays the Week view.

•Day

: displays the Day view.

•List

: allows you to search for events for the selected Month, Week,

or Day, or you can look for events for a future date.

2. Press and select one of the following options:

•Create

: creates a new Event.

•Go to

: displays a specific date.

•Today

: displays the date highlighted with a Blue box highlighting

the date.

•Search

: allows you to search within current events.

• Delete

: allows you to delete All events, All events before today, or

an individual event.

• Settings

: displays a list of configurable settings.

For more information, refer to “Synchronizing Contacts” on

page 95.

To manually sync calendar events:

1. Press ➔ and then tap ➔

Accounts and

sync

2. Locate the email account containing the events you wish to

synchronize.

3. Tap within the adjacent account field to reveal the

account’s synchronization settings screen.

4. Tap

Sync Calendar

to activate the synchronization of

calendar events between your device and the remote

exchange server. A green checkmark indicates the feature

is enabled.

Contacts

The default storage location for saving phone numbers to your

Contacts List is your phone’s built-in memory.

For more information, refer to “Contacts List” on page 84.

145

Camera

Use your 8.0 megapixel camera feature to produce photos in a JPEG

format. The Camcorder shoots High Definition video in an MP4

format.

Note:

An SD card must be inserted before the Camera will take and store

photos.

䊳

From the Home screen, tap (

Applications

)

➔

(

Camera

For more information, refer to “Using the Camera” on page 119.

Clocks

Here you can set an alarm, configure and view the World clock,

use a stopwatch, or set a timer. The applications display in a

tabular format and quickly accessed with the touch of a finger.

䊳

From the Home screen, tap (

Applications

)

➔

(

Clock

For more information, refer to “Clock” on page 191.

Downloads

Provides quick access to tabs containing a list of your current

downloaded files (Internet and Other).

1. From the Home screen, tap (

Applications

)

➔

(

Downloads

2. Tap an available file category tab (

Internet downloads

Other downloads

) and select the desired file. Compatible

document formats can be opened by Polaris Office

(page 163).

Email enables you to review and create email using most email

services. The device alerts you when you receive an email

message.

For more information, refer to “Email” on page 108.

Files

Organize and store data, images, and more in your own personal

file folders. Files are stored to the memory card in separate (user

defined) folders.

䊳

From the Home screen, tap (

Applications

)

➔

(

Files

For more information, refer to “Files” on page 130.

Applications and Development 146

Gallery

The Gallery is where you view photos and play back videos. For

photos, you can also perform basic editing tasks, view a

slideshow, set photos as wallpaper or caller image, and share as

a picture message.

䊳

From the Home screen, tap (

Applications

)

➔

(

Gallery

For more information, refer to “The Gallery” on page 131.

Google Mail

Google Mail (Gmail) is a web-based email service. Gmail is

configured when you first set up your phone. Depending on your

synchronization settings, Gmail can automatically synchronize

with your Gmail account on the web.

䊳

From the Home screen, tap (

Applications

)

➔

(

Gmail

For more information, refer to “Using Google Mail” on page 115.

Google Search

Google Search is a web-based search engine that uses

text-based queries to search for content on web pages.

䊳

From the Home screen, tap (

Applications

)

➔

(

Google Search

) and enter the search text.

– or –

Tap on the Google Search bar and say the search

information. For more information, refer to “Search Key”

on page 29. For more information, refer to “Using Google

Search” on page 29.

Instant Messaging allows you to send and receive instant

messages using Windows Live Messenger, Google Talk, or Yahoo!

Messenger communities.

䊳

From the Home screen, tap (

Applications

)

➔

(

For more information, refer to “Using Instant Messaging (IM)” on

page 118.

147

Kies air

Kies air allows you to sync your Windows PC wirelessly with your

phone provided they are both on the same Wi-Fi network. You

can view and share call logs, videos, photos, music, bookmarks,

ringtones, and even send SMS messages from your PC.

䊳

From the Home screen, tap (

Applications

)

➔

(

Kies air

For more information, refer to “Kies Air” on page 184.

Latitude

Google Latitude allows you and your friends share locations and

status messages with each other. It also lets you send instant

messages and emails, make phone calls, and get directions to

your friends’ locations.

Important!:

You must sign in to your Google account, enable Wi-Fi, and

enable the Location feature before you can use this application.

For more information, refer to “Wi-Fi settings” on page 194.

Note:

Although you do not have to enable location services in order to use

Latitude, it is recommended for best accuracy.

1. From the Home screen, tap (

Applications

)

➔

(

Latitude

Important!:

For best results, it is recommended that you enable all of your

location services. For more information, refer to “Location and

Security” on page 211.

2. Tap

Wi-Fi Disabled - Click to enable

connection to navigate

to the Wi-Fi Settings menu where you can turn on Wi-Fi if it

is not already enabled.

For more information, refer to “Wi-Fi” on page 185.

Applications and Development 148

Sharing your Location with Friends

1. From the Latitude map screen, tap to display your

Latitude friends. At first, only your name is displayed.

2. Press

➔

Add friends

3. Tap

Select from Contacts

Add via email address

4. Tap a contact or enter an email address, then tap

Add friends

5. Tap

Yes

at the

Send sharing requests

prompt.

Your friend will receive an email or text message with your

location marked on a map. They will also receive

instructions on how to view your location from the web or

use Latitude on their phone or tablet provided it is

available. Once they acknowledge your request, their

location will display on your tablet. They can share their

location from their computer, phone, or tablet. For more

information, go to

http://www.google.com/latitude

6. To view the map, press

➔

See map

Latitude Options

䊳

From the map display, press to display the following

options:

•Search

: allows you to search for a place of interest.

• Directions

: displays navigation directions to a location from a

starting point.

• My Places

: allows you to see locations you have marked as a

favorite such as restaurants, museums, parks, and so forth. Press

and hold on a location and when the screen displays with the

address, tap the star in the upper-right corner. It will be listed in your

Starred Places.

• Clear Map

: allows you to remove all markings and layers from the

map.

• Latitude

: lets you and your friends share locations and status

messages with each other. It also lets you send instant messages

and emails, make phone calls, and get directions to your friends’

locations.

•More

: allows you to select the following additional options:

–

Labs

: this is a testing ground for experimental features that aren’t ready

for primetime. They may change, break or disappear at any time. Click

on a Lab to enable or disable it.

–

Cache Settings

: allows you to set options to pre-fetch map tiles when

not using Wi-Fi and to clear the cache that holds the map tiles.

–

Help

: displays the Google Mobile Help web page where you can receive

help on Google Maps.

149

–

Terms, Privacy & Notices

: displays the Terms and Conditions, Privacy

Policy, o r Legal Notices information. Select the desired information from

the pop-up menu.

–

About

: displays general information about Google maps such as

Version, Platform, Locale, Total data sent, Total data received, Free

memory, etc.

Lookout

Lookout™ provides mobile device-specific security features that

are coupled with a minimal performance hit. Lookout Mobile

Security provides key security options that are unique to the

mobile market. Along with the antivirus and anti-malware tech,

there's a lost and stolen phone locator service, an application

privacy adviser, and a backup service.

1. From the Home screen, tap (

Applications

)

➔

(

Lookout

2. Read the on-screen descriptions and tap

Get started

begin your configuration.

3. Read the on-screen information about Security and if

desired, tap the

Enable Security

field to activate the

feature.

4. Tap

5. Read the on-screen information about Backup and if

desired, tap the

Enable Backup

field to activate the feature.

6. Tap

7. Read the on-screen information about the feature that can

help locate your missing phone and if desired, tap

New user

(to setup a new account) or

Existing user

(to log

into your account field to activate the feature).

8. Tap

Start Lookout

From the main application, the main features are presented as

buttons. Tap one to reveal a button that will run the feature.

Maps

Google Maps allow you to track your current location, view

real-time traffic issues, and view detailed destination directions.

There is also a search tool included to help you locate places of

interest or a specific address. You can view locations on a vector

or aerial map, or you can view locations at the street level.

Important!:

Before using Google Maps you must have an active data (3G/4G)

or Wi-Fi connection. The Maps application does not cover every

country or city.

䊳

From the Home screen, tap (

Applications

)

➔

(

Maps

Applications and Development 150

Important!:

For best results, it is recommended that you enable all of your

location services. For more information, refer to “Location and

Security” on page 211.

Enabling a Location source

Before you use Google Maps and find your location or search for

places of interest, you must enable a location source. To enable

the location source you must enable the wireless network, or

enable the GPS satellites.

Important!:

The more location determining functions are enabled, the more

accurate the determination will be of your position.

1. Press ➔ and then tap (

Settings

) ➔

Location and security

2. Tap

Use wireless networks

to enable GPS to determine

location based on nearby cell towers.

3. Tap

Use GPS satellites

to enable the GPS satellite.

4. Tap

Use sensor aiding

to enhance positioning and save

power using sensors.

Tip:

When using Google Maps you can turn on Enable GPS satellites.

Selecting GPS satellites allows you to locate places of interest at the

street-level. However, this also requires a clear view of the sky and uses

more battery power.

Opening Maps

1. From the Home screen, tap (

Applications

)

➔

(

Maps

2. Locate the top row of the applications to access additional

options:

• Search Maps

: allows you to search for a place of interest.

• Places

: provides access to the places menu where you can quickly

locate a business or person, find out more information about a

business, see coupons, public responses, and more (page 162).

Locate and tap one of the listed places (Restaurants, Coffee, Bars,

Attractions, ATMs, Gas Stations, Explore Nearby, or Add your own

place.) A list of places within this category displays.

• Layers

: allows you to switch map views:

–

Traffic

: (available only in selected areas) Real-time traffic conditions are

displayed over roads as color-coded lines. Each color represents how

fast the traffic is moving.

–

Satellite

: Maps uses the same satellite data as Google Earth. Satellite

images are not real-time. Google Earth acquires the best imagery

available, most of which is approximately one to three years old.

151

–

Terrain

: combines a topographical view of the area’s terrain with the

current map location.

–

Transit Lines

: displays the overlapping transit lines on your map.

–

Latitude

: allows you to see your friend's locations and share your

location with them.

–

My Maps

: displays a list of your preferred maps.

–

Bicycling

: displays the overlapping cycling trails on your map.

–

Wikipedia

: displays any Wikipedia markers and info on your map.

–

Buzz

: allows you post public messages and photos at a location for

everyone to see.

• My Location

: when touched, the location displays on the map with

a blinking blue dot.

3. Press and select one of the following options:

• Search

: allows you to search for a place of interest.

• Directions

: displays navigation directions to a location from a

starting point.

• My Places

: marks favorite locations on the map. These items are

automatically synchronized with maps.

• Clear Map

: after viewing or following directions, this option resets

the map.

• Latitude

: lets you and your friends share locations and status

messages with each other. It also lets you send instant messages

and emails, make phone calls, and get directions to your friends’

locations.

•More

–

Labs

: a testing ground for experimental features that are not ready to

use publically.

–

Cache Settings

: provides the ability to setup maps that are cached into

the phone’s memory (while not on a Wi-Fi connection) or to clear the

cache of map titles.

–

Help

: uses the browser to display a searchable Google Mobile Help

screen.

–

Terms, Privacy & Notices

: displays the Terms and Conditions, Privacy

Policy, or Legal Notices information. Select the desired information from

the pop-up menu.

–

About

: displays general information about Google maps such as

Version, Platform, Locale, Total data sent, Total data received, Free

memory, etc.

Market

Android Market provides access to downloadable applications

and games to install on your phone. Android Market also allows

you to provide feedback and comments about an application, or

flag an application that might be incompatible with your phone.

Applications and Development 152

Accessing the Market

1. From the Home screen, tap (

Applications

)

➔

(

Market

2. If not already logged in with your Google account, tap

3. Tap

and enter your Google account information.

4. Tap

to agree to the Android Market terms of

service.

For more information, refer to “Downloading a New Google

Application” on page 152.

Downloading a New Google Application

To download a new application, you will need to use your Google

account to sign in to Android Market. The Android Market home

page provides several ways to find applications. The home page

features applications and includes a list of item applications by

category, a list of games, a link to search, and a link to My apps.

1. From the Home screen, tap (

Applications

)

➔

(

Market

2. Browse through the categories, find an application you're

interested in, and tap the name.

3. Read the application descriptions.

Important!:

If the selected application requires access to data or control of a

function on your phone, Market displays the information the

application will access.

Tap

if you agree to the conditions of the application. Once you

tap

on this screen you are responsible for using this

application on the phone and the amount of data it uses. Use this

feature with caution.

4. Tap

Install

Note:

Use caution with applications which request access to any personal

data, functions, or significant amounts of data usage times.

5. If prompted, follow the on-screen instructions to pay for

the application.

6. Check the progress of the current download by opening

the Notifications panel.

7. After the item is downloaded and installed on your phone,

the content download icon appears in the

notification area of the status bar.

8. On the Android Market screen, press and then tap

My apps

, tap the installed application in the list, and then

tap

Open

153

Tip:

The newly downloaded applications display in the applications list and

are shown in alphabetical order if the View Type is set to Alphabetical

grid or Alphabetical list, or at the end of the list if View type is set to

Customizable grid.

Note:

A data plan is required to use this feature. Charges may apply. Please

contact your service provider for further details.

Launching an Installed Google Application

1. From the Home screen, tap (

Applications

2. Tap the newly installed application. This application is

typically located on the last Applications page.

Android Development

This device can be used for Android application development.

You can write applications in the SDK and install them on this

device, then run the applications using the hardware, system,

and network.

Warning!:

Android Dev Phones are not intended for non-developer

end-users. Because the device can be configured with system

software not provided by or supported by Google or any other

company, end-users operate these devices at their own risk.

Unknown sources

This feature can be used for Android application development.

The feature allows developers to install non-Market applications.

1. Press ➔ and then tap (

Settings

) ➔

Applications

➔

Unknown sources

Unknown sources displays a check mark to indicate it is

active.

Manage applications

This feature allows you to manage and remove installed

applications. You can also view the amount of memory or

resources used as well as the remaining memory and resources

for each of the applications on your phone and clear the data,

cache, or defaults.

䊳

Press ➔ and then tap (

Settings

) ➔

Applications

➔

Manage applications

Clearing application cache and data

1. Press ➔ and then tap (

Settings

) ➔

Applications

➔

Manage applications

2. Tap an application in which to clear the cache or data.

3. Tap

Force stop

Clear data

Clear cache

, or

Clear defaults

Applications and Development 154

Uninstalling third-party applications

You can uninstall any application you downloaded and installed

from Android Market.

1. Press ➔ and then tap (

Settings

) ➔

Applications

➔

Manage applications

2. Tap the third-party application, and from the

Application

info

screen, tap

Uninstall

Media Hub

䊳

From the Home screen, tap (

Applications

)

➔

(

Media Hub

For more information, refer to “Media Hub” on page 134.

Memo

This feature allows you to create a memo.

1. From the Home screen, tap (

Applications

)

➔

(

Utility

) ➔ (

Memo

2. Tap

Create memo

Note:

If this is your first memo, you are automatically taken to the new memo

screen.

3. Compose the memo.

4. Tap

Save

For more information, refer to “Text Input Methods” on page 72.

Memo options

1. While viewing the list of Memos, press and select

one of the following options:

•Create

allows you to create a memo.

• Delete

: allows you to delete one or more memos.

•Search

: allows you to search within the current set of memos.

•Send

: allows you to send one or several of your memos at one

time. Select a memo and tap send to deliver it via: Bluetooth, Email,

Messaging, or Wi-Fi.

•Sort by

: allows you to sort by Date or Color.

•More

: provides the following options:

–

SNS log in

: allows you to log into your Facebook, Twitter, or LinkedIn

accounts.

–

Sync memo

: allows you to sync your memos Google Docs or send

individual memos.

–

PIN lock

: allows you to set a PIN lock so that a PIN must be entered

before reading a memo.

155

2. Touch and hold the memo then select

Send

and choose

the method to send this memo:

Bluetooth

Messaging

Wi-Fi

3. From the memo list, touch the upper-left edit button and

select a color for the memo’s background, then tap

Save

Messaging

This application allows you to use the Short Message Service

(SMS) to send and receive short text messages to and from other

mobile phones.

You can also use the Multi Media Service (MMS) to create

multimedia messages to send and receive from other mobile

phones.

䊳

From the Home screen, tap (

Applications

)

➔

(

Messaging

For more information, refer to “Messages” on page 102.

Mini Diary

This application allows you to create a mini diary where you can

add a photo, and text to describe an event or other memorable

life event.

1. From the Home screen, tap (

Applications

)

➔

(

Utility

) ➔ (

Mini Diary

). Any diary entries display in a

list.

2. If prompted, tap

Yes

to allow required network

connectivity.

3. Tap the

Tap to add photo

field to add a photo for this diary

event and touch the source. Selections are:

Camera

, or

Gallery

4. Tap the

Add location

area of the screen, enter text, then tap

Done

5. Tap the

Tap to add text

area of the screen and enter text

then tap

Done

6. Tap the weather data icon in the upper, right corner (above

the photo) and select a weather condition from the list to

describe the weather conditions for this entry.

7. Tap

Save

Applications and Development 156

Mini Diary settings

1. From the Home screen, tap (

Applications

)

➔

(

Utility

) ➔ (

Mini Diary

2. From the main Diary listings page, press and then

tap

Settings

3. Tap

Auto update

if you want the settings to automatically

update.

Deleting a Mini Diary entry

1. From the Home screen, tap (

Applications

)

➔

(

Utility

) ➔ .

2. Press and then tap

Delete all

Mini Diary options

1. From the Home screen, tap (

Applications

)

➔

(

Utility

) ➔ .

2. Select a diary.

3. Press and select one of the following options:

•Create

: creates a new diary entry.

• Delete

: deletes the displayed entry.

•Edit

: allows you to edit the current diary entry.

• Change photo

: replaces the photo in this entry by allowing you to

take another photo or use another image.

• Delete photo

: deletes the photo from this entry when you touch Yes

to confirm.

•More

: provides additional options such as: Publish (SNS service

such as Facebook) and Send via (to deliver the entry via either Email

or Messaging).

More for Me

Provides customized offers, discounts and deals right to your

phone by providing some brief customer and location

information. The application uses your current location to bring

you the best deals in your area.

Initial Setup

1. From the Home screen, tap (

Applications

)

➔

(

More for Me

2. Read the on-screen information and configure the

necessary options such as: Gender, Age, and agreements.

3. Tap

Continue

to complete the setup process.

157

Using the More for Me Application

1. From the Home screen, tap (

Applications

)

➔

(

More for Me

2. Access an available tab for more options:

• Just for Me

: displays a listing of current offers available

within your current area.

• All Deals

: Provides you with common categories to choose from,

such as: Food & Drinks, Health & Beauty, Retail & Service,

Activities, Events, Other, and All nearby.

•My Deals

: displays a list of previously redeemed offers.

• Settings

: Provides access to configuration settings such as: Get

Better Deals, Connect with Facebook, and Terms & Conditions.

Music

This application allows you to play music files that you have

stored on your microSD card. You can also create playlists.

䊳

From the Home screen, tap (

Applications

)

➔

(

Music

For more information, refer to “Music” on page 136.

My Account

This option provides you with account specific information such

as your current activity, billing information, and Plan Services

information. You can also set alerts for minute or message usage,

payment reminder, or power saver.

Note:

You may be prompted to log into the Android Market to receive the

latest version of the T-Mobile My Account application.

The differences between My Account and My Device are these:

• My Account

: check Activity, set Alerts and Events, review Billing,

and review your current Plan and services.

•My Device

: Personalize settings, Quick Tools, Support, and Storage

& Battery.

Tip:

Use the Menu key to toggle between My Account and My Device.

1. From the Home screen, tap (

Applications

)

➔

(

My Account

2. Read the on-screen information and tap

The initial screen displays four tabs: Activity, Set Alerts, Billing,

and Plan.

Applications and Development 158

Activity

The Activity tab displays your current minute and message

activity. You can view what percentage of minutes were used as

well as the number of messages used for a particular start date.

Alerts and Events

From this screen you can activate alerts to notify you of the

following:

• Alert Settings

: sets when you would receive alerts for the following:

–

Minute Usage

: tracks the number of minutes used and remaining in

your plan. Minute Usage Reminder: sends an alert when the number of

minutes used reaches 75 percent of the total available minutes in the

plan. Over Limit Alert: sends an alert when usage exceeds your plan’s

total available minutes.

–

Message Usage

: tracks the number of messages used and remaining

in your plan. If you plan includes unlimited messages this setting does

not apply.

–

Data Usage

: tracks data used and remaining in your plan. If you plan

includes unlimited data usage this setting does not apply.

–

Payment Reminder

: alerts when your bill is due.

–

Power Saver

: sends an alert when the battery level reaches 30

percent. The alert displays in the notification window. This alert is

automatically set to

• Recent Oder Status

: Displays details about your recent orders.

• Account Events

: provides details about your recent account

events.

Billing

This provides a billing summary.

Plan

This screen displays specific information and charges for your

current plan and services. The screen also displays additional

services information and charges. Included categories include:

My plan & services, Additional Services, and T-Mobile Offers.

My Device

Use the My Device application to configure device settings, view

support information, personalize your CallerTunes, Ringtones, or

Wallpapers, or view battery storage information.

1. From the Home screen, tap (

Applications

)

➔

(

My Device

2. Read the on-screen information and tap

Tip:

Use the Menu key ( ) to toggle between My Account and My Device.

The differences between My Account and My Device are these:

• My Account

: check Activity, set Alerts and Events, review Billing,

and review your current Plan and services.

• My Device

: Personalize settings, Quick Tools, Support, and Storage

& Battery.

159

The initial screen displays four tabs: Personalize, Quick Tools,

Support, and Storage Battery.

Personalize

Using this menu you can personalize CallerTunes, Ringtone, and

Wallpapers.

• CallerTunes

: allows you to choose songs for your callers to hear.

• Ringtones

: you can personalize your phone’s ringtones by

choosing from recordings, voices, and more.

• Wallpapers

: you can personalize your phone’s background by

selecting wallpapers from the Shop, Gallery, Live Wallpapers, and

the Wallpaper Gallery.

Quick Tools

Quick Tools is a shortcut that allows you to view and configure

the following features and parameters: Wi-Fi, Bluetooth, Data

Roaming, GPS, Brightness, Screen Timeout, and Phone Info.

Support

Displays support information My Account Feedback, T-Mobile

Forums, T-Mobile on Twitter, and T-Mobile® Tech Assist™.

Storage & Battery

From this tab you can view Memory storage information for the

phone or memory card. You can also view the battery level

percentage and other information.

Navigation

Google Maps Navigation (Beta) is an internet-connected

turn-by-turn, GPS navigation system with voice guidance.

Caution!:

Traffic data is not real-time and directions may be wrong,

dangerous, prohibited, or involve ferries.

Important!:

To receive better GPS signals, avoid using your device in the

following conditions:

- inside a building or between buildings

- in a tunnel or underground passage

- in poor weather

- around high-voltage or electromagnetic fields

- in a vehicle with tinted windows

䊳

From the Home screen, tap (

Applications

)

➔

(

Navigation

Enabling GPS Location

1. Press ➔ and then tap (

Settings

) ➔

Location and security

2. Tap

Use wireless networks.

A green check mark indicates

the GPS location feature has been enhanced by using Wi-Fi

and/or mobile networks to increase accuracy.

Applications and Development 160

3. Tap

Use GPS satellites.

A green check mark indicates the

GPS location feature is enabled.

4. Tap

Use sensor aiding.

A green check mark indicates the

phone is enhancing its positioning ability and save power

by using sensors.

Navigation options

1. From the Home screen, tap ➔ (

Navigation

The navigation application can be configured from the

main screen.

2. Read the on-screen disclaimer and tap

3. Choose from the following on-screen options:

• Driving/Walking

: configures the method of travel. Selection of

Walking would negate the need to track traffic jams and

obstructions.

–

Driving mode enables the

Settings

feature: allows you to configure

your Route options such as:

Avoid highways

Avoid tolls

•Maps

: enables the on-screen real-time map functionality.

• Speak Destination

: allows you to use the voice recognition feature

to search for matching locations in your area.

• Type Destination

: allows you to manually enter a destination

address (via the on-screen keypad).

• Contacts

: allows you to receive turn-by-turn directions to the

address stored for a selected Contacts entry.

• Starred Places

: allows you to obtain directions to locations that

have been starred within Google maps (

maps.google.com

Navigation Map options

Once on the map screen, you can access the following features:

•

Destination

: returns you to the previous Navigation options screen.

•

Search by voice

: Speak your destination instead of typing.

•

Layers

: allows you to switch map views:

• Traffic view

: (available only in selected areas) Real-time traffic

conditions are displayed over roads as color-coded lines. Each color

represents how fast the traffic is moving.

• Satellite

: Maps uses the same satellite data as Google Earth.

Satellite images are not real-time. Google Earth acquires the best

imagery available, most of which is approximately one to three

years old.

• Parking

: displays parking information relative to your current

location.

• Gas Stations

: displays gas station location relative to your current

location.

• ATMs & Banks

: displays ATM and Bank locations relative to your

current location.

• Restaurants

: displays restaurant and eatery locations relative to

your current location.

161

Press to access additional options:

•

: manually search for a destination address, place, name of

business, or even a type of business.

•

Set Destination

: returns you to the navigation options screen where

you can access a destination by either Speaking, Typing, or selecting

from a Contacts entry or Starred Place.

•

Layers

: allows you to switch map views. See previous description.

•

Mute

: allows you to mute the audio readout and directional

information.

•

Exit Navigation

: terminates the application.

•

: provides additional application information such as: Help and

Terms, Privacy & Notices.

Caution!:

Navigation is a beta product. Use caution.

Netflix

Netflix is a service offering online streaming service that allows

you to watch TV Shows & Movies directly on your phone.

1. From the Home screen, tap (

Applications

)

➔

(

Netflix

). If prompted to update, follow the on-screen

prompts.

2. Enter the

and

Password

associated with your current

Netflix account.

3. Follow the on-screen prompts to use the application.

Note:

It is recommended that this service be used in conjunction with an

active Wi-Fi connection.

News & Weather

The News & Weather application allows you to view the news

and weather in your area.

1. From the Home screen, tap (

Applications

)

➔

(

News & Weather

2. Select from any of the available tabs:

Weather

Directory

: provides access to additional directory service from: What’s

New, Email/IM, Facebook Social/Chat, Cnn News, Weather, and

Entertainment.

Navigating with the Browser

1. To select an item, tap an entry.

2. To scroll through a website, sweep the screen with your

finger in an up or down motion.

3. To return to the previous page, press .

Browser Options

1. From the home page, press to access the following

options:

• New window

: displays a new window so you can browse multiple

URLs. For more information, refer to

“Adding and Deleting

Windows”

on page 175.

• Windows

: displays a list of the windows you have open.

• Browser brightness

: allows you to manually adjust the screen

brightness.

Note:

If the Automatic brightness feature is enabled (

Settings

➔

Display

➔

Brightness

), you can not modify the browser’s brightness setting.

•Refresh

: reloads the current page.

•Forward

: forwards the browser to another web page.

•More

: displays the following additional options:

–

Add bookmark

: allows you to add a URL to your bookmark list.

–

Add shortcut to Home

: adds a shortcut to your web2go homepage on

your phone’s Home screen.

–

Find on page

: allows you to search in the current page.

–

Page info

: displays information about the selected page.

–

: allows you to share the page using Gmail or as a

message.

–

Downloads

: displays the download history.

–

Settings

: allows you to change the way you view your web pages by

changing these options. See “Browser Settings” on page 177.

–

: provides print access on compatible Samsung printers.

Entering a URL

You can access a website quickly by entering the URL. Websites

are optimized for viewing on your phone.

To enter a URL and go to a particular website:

䊳

From the homepage tap the URL field at the top of the

screen, enter the URL and tap .

175

Note:

This is not the same application as the Google Search Widget. The

web2go screen can not be accessed via a Wi-Fi connection.

Search the Internet

To perform an internet search using keywords:

1. From within the Google search application, tap the Google

search field, enter the keyword(s) to search using the on-

screen keypad.

2. Tap . A list of search results displays.

3. Tap a link to view the website.

Adding and Deleting Windows

You can have up to eight Internet windows open at one time. To

add a new window, follow these steps:

1. From your browser, press and then tap

New window.

– or –

Press and then tap

Windows

➔

New window

2. A new browser window displays.

3. Press and then tap

Windows

to see a list of all open

windows.

Note:

This icon will display a number that corresponds to the current number

of active browser windows,

4. Scroll across the screen to view the currently active

windows and tap an entry to launch the selected Internet

window.

5. Tap next to the listing to delete the window.

Using Bookmarks

While navigating a website, you can bookmark a site to quickly

and easily access it at a future time. The URLs (website

addresses) of the bookmarked sites display in the Bookmarks

page. From the Bookmarks page you can also view your Most

visited websites and view your History.

1. From the webpage, tap . The

Bookmarks

page

displays. Additional pages include

Most visited

and

History

2. Press to display the following options:

• Bookmark last-viewed page

: Creates a new bookmark for the

last webpage that you viewed.

• List/Thumbnail view

: Select

Thumbnail view

(default) to view a

thumbnail of the webpage with the name listed, or select

List view

to view a list of the bookmarks with Name and URL listed.

• Create folder

: Creates a new folder in which to store new

bookmarks.

Connections 176

• Change order

: Rearranges the current bookmarks.

• Move to folder

: Selected bookmarks are moved to a selected

folder.

• Delete

: Erases selected bookmarks.

3. Tap a bookmark to view the webpage, or touch and hold a

bookmark for the following options:

•Open

: Opens the webpage of the selected bookmark.

• Open in new window

: Opens the webpage in a new window.

• Edit bookmark

: Allows you to edit the name or URL of the

bookmark. For more information, refer to

“Editing Bookmarks”

on page 176.

• Add shortcut to Home

: Adds a shortcut to the bookmarked

webpage to your phone’s Home screen.

• Share link

: Allows you to share a URL address via Bluetooth, Email,

Gmail, Messaging, My tag, or Wi-Fi.

• Copy link URL

: Allows you to copy the URL address to use in a

message.

• Delete bookmark

: Allows you to delete a bookmark. For more

information, refer to

“Deleting Bookmarks”

on page 176.

• Set as homepage

: Sets the bookmark to your new homepage.

Adding Bookmarks

1. From the Home webpage, tap ➔

Add

2. Use the on-screen keypad to enter the name of the

bookmark and the URL.

3. Assign a folder location.

Home

is the default.

4. Tap

. The new save page now appears on the

Bookmarks page.

Editing Bookmarks

1. From the Bookmarks page, touch and hold the bookmark

you want to edit.

2. Tap

Edit bookmark

3. Use the on-screen keypad to edit the name of the

bookmark or the URL.

4. Tap

Deleting Bookmarks

1. From the Bookmarks page, touch and hold the bookmark

you want to delete.

2. Tap

Delete bookmark

3. At the confirmation window, tap

177

Emptying the Cookies

A cookie is a small file placed on your phone by a website during

navigation. In addition to containing some site-specific

information, a cookie can also contain some personal information

(such as a username and password) which might pose a security

risk if not properly managed. You can clear these cookies from

your phone at any time.

1. From the Home webpage, press and then tap

➔

Settings

➔

Clear all cookie data

2. Tap

to delete the cookies or tap

Cancel

to exit.

Using Web History

The History list displays a list of the most recently viewed

websites. These entries can be used to return to previously

unmarked web pages.

1. From the Home webpage, tap ➔

History

tab.

A list of the most recently viewed websites displays.

2. Tap an entry to display the webpage.

– or –

Press and then tap

Clear history

to delete the current

History list.

Using Most Visited

The Most visited list provides you with a list of the most visited

and bookmarked websites. These entries are used to return to

previously unmarked web pages.

1. From the Home webpage, tap ➔

Most visited

tab.

A list of your most frequently visited webpages displays.

The most frequently visited web pages display at the top of

the list.

2. Tap any entry to display the selected webpage.

Browser Settings

To configure browser settings:

1. From the Home screen, tap (

Applications

)

➔

(

Web

2. Press and then tap

➔

Settings

3. Choose from the following on-screen options:

• Default zoom

: Adjusts the zoom feature. Set to Far, Medium, or

Close.

• Open pages in overview

: Displays an overview of recently viewed

web pages.

• Text encoding

: Adjusts the current text encoding.

Connections 178

• Block pop-up windows

: Prevents popup advertisement or

windows from appearing on-screen. Remove the checkmark to

disable this function.

• Load images

: Allows web page images to load along with the other

text components of a loaded website.

• Auto-fit pages

: Allows web pages to be resized to fit as much of

the screen as possible.

• Landscape view only

: Displays the browser in only the horizontal

position.

• Enable JavaScript

: Enables javascript for the current Web page.

Without this feature, some pages may not display properly. Remove

the checkmark to disable this function.

• Enable plug-ins

: Allows the download of plug-ins such as Adobe

Flash.

• Open in background

: New pages are launched in a separate page

and displayed behind the current one. Remove the checkmark to

disable this function.

• Set home page

: Sets the current home page for the Web browser.

• Default storage

: Sets the default storage to Memory card.

• Clear cache

: Deletes all currently cached data. Tap

to complete

the process.

• Clear history

: Clears the browser navigation history. Tap

complete the process.

• Accept cookies

: Allows sites, that require cookies, to save and

read cookies from your device.

• Clear all cookie data

: Deletes all current browser cookie files.

• Remember form data

: Allows the device to store data from any

previously filled out forms. Remove the checkmark to disable this

function.

• Clear form data

: Deletes any stored data from previously filled out

forms. Tap

to complete the process.

• Enable location

: Allows websites to request access to your

location.

• Clear location access

: Clears location access for all websites. Tap

to complete the process.

• Remember passwords

: Stores usernames and passwords for

visited sites. Remove the checkmark to disable this function.

• Clear passwords

: Deletes any previously stored usernames or

passwords. Tap

to complete the process.

• Show security warnings

: Notifies you if there is a security issue

with the current website. Remove the checkmark to disable this

function.

• Select search engine

: Allows you to choose a default search

engine for your phone. Choose from:

Google

Yahoo!

, or

Bing

• Website settings

: View advanced settings for individual websites.

• Reset to default

: Clears all browser data and resets all settings to

default.

179

Bluetooth

About Bluetooth

Bluetooth is a short-range communications technology that

allows you to connect wirelessly to a number of Bluetooth

devices, such as headsets and hands-free car kits, and

Bluetooth-enabled handhelds, computers, printers, and wireless

devices. The Bluetooth communication range is usually up to

approximately 30 feet.

Turning Bluetooth On and Off

To turn Bluetooth on:

1. Press ➔ and then tap (

Settings

) ➔

Wireless and network

➔

Bluetooth settings

2. Tap the

Bluetooth

field to activate the feature (checkmark

indicates active). When active, displays in the

Status area.

To turn Bluetooth off:

1. Press ➔ and then tap (

Settings

) ➔

Wireless and network

➔

Bluetooth settings

2. Tap the

Bluetooth

field to deactivate the feature.

Bluetooth Status Indicators

The following icons show your Bluetooth connection status

at a glance:

Displays when Bluetooth is active.

Displays when Bluetooth is connected (paired) and

communicating.

Bluetooth Settings

The Bluetooth settings menu allows you to set up many of the

characteristics of your device’s Bluetooth service, including:

•

Entering or changing the name your device uses for Bluetooth

communication and description

•

Setting your device’s visibility (or “discoverability”) for other Bluetooth

devices

•

Displaying your device’s Bluetooth address

To access the Bluetooth Settings menu:

1. Press ➔ and then tap (

Settings

) ➔

Wireless and network

➔

Bluetooth settings

2. Verify Bluetooth is active. Indicated by a green check mark

in the Bluetooth field.

Connections 180

3. Tap the

Device name

Visible

Visible time-out

, and

for devices

fields to set the options.

To change your Bluetooth name:

1. Verify Bluetooth is active.

2. From the Bluetooth settings page, tap

Device name

3. Enter a new name.

4. Tap

to complete the rename process.

To set visibility:

1. Verify your Bluetooth is active.

2. From the Bluetooth settings page, tap

Visible

Making your device visible allows other devices to pair and

communicate.

Note:

Your device visibility is based on the time set within the Visible time-

out field (2 Minutes, 5 Minutes, 1 Hour, or Never). This value appears

as a countdown within this

Visible time-out

field.

To scan for Bluetooth devices:

1. Verify Bluetooth is active.

2. From the Bluetooth settings page, tap

Scan for devices

search for visible external Bluetooth-compatible devices

such as headsets, devices, printers, and computers.

Pairing Bluetooth Devices

The Bluetooth pairing process allows you to establish trusted

connections between your device and another Bluetooth device.

When you pair devices, they share a passkey, allowing for fast,

secure connections while bypassing the discovery and

authentication process.

Note:

Pairing between two Bluetooth devices is a one-time process. Once

pairing is established the devices continue to recognize their

partnership and exchange information without entering a passcode.

To pair your device with another Bluetooth device:

1. Verify Bluetooth is active.

2. From the Bluetooth settings page, tap

Visible

Your device must be visible to successfully pair with an

external device.

3. Tap

Scan for devices

. Your device displays a list of

discovered in-range Bluetooth devices.

4. Tap a device from the list to initiate pairing.

181

5. Enter the passkey or PIN code, if needed, and tap

6. The external device must accept the connection and enter

your device’s PIN code.

Once successfully paired to an external device,

displays in the Status area.

Note:

Due to different specifications and features of other Bluetooth-

compatible devices, display and operations may be different, and

functions such as transfer or exchange may not be possible with all

Bluetooth-compatible devices.

Disconnecting a Paired Bluetooth Device

Disconnecting a paired device breaks the connection between

the device and your phone, but retains the knowledge of the

pairing. At a later point when you wish to reconnect the device,

there is no need to setup the connection information again.

1. Verify your Bluetooth is active.

2. From the Bluetooth settings page, tap the previously paired

device (from the bottom of the page).

3. Tap

to confirm disconnection.

– or –

From the Bluetooth settings page, touch and hold the

name of the previously paired device, and select

Disconnect

Note:

Disconnections are manually done but often occur automatically if the

paired device goes out of range of your phone or it is powered off.

Deleting a Paired Bluetooth Device

Deleting a device from your list removes its “connection record”

and upon reconnection would require that you re-enter all the

previous pairing information.

1. Verify Bluetooth is active.

2. From the Bluetooth settings page, touch and hold the

name of the previously paired device (from the bottom of

the page). This opens the connected device’s menu

options.

3. Tap

Unpair

to delete the paired device.

Sending Contacts via Bluetooth

Depending on your paired devices’ settings and capabilities, you

may be able to send pictures, Contact information, or other items

using a Bluetooth connection.

Connections 182

Note:

Prior to using this feature, Bluetooth must first be enabled on both your

phone and the external device, and the recipient’s device must be

visible.

1. Verify your Bluetooth is active and your phone is visible.

2. From the Home screen, tap (

Contacts

3. Touch and hold the entry from the list to display the on-

screen context menu.

4. Tap

Send namecard via

➔

Bluetooth

and select a paired

external Bluetooth device.

Note:

The external Bluetooth device must be visible and communicating for

the pairing to be successful.

5. A Bluetooth share notification displays in your notifications

list.

Enable Downloading for Web Applications

Important!:

Before you can download a web application you must insert an

SD into the phone and enable the

Unknown sources

feature

(enables downloading). For more information, refer to “Installing

the microSD Memory Card” on page 9. Also, see “Mounting the

SD Card” on page 52.

1. Press ➔ and then tap (

Settings

) ➔

Applications

2. Tap the

Unknown sources

check box.

3. Tap

to allow install of non-Market applications.

Tap again to remove the checkmark and disable the

installation of non-market applications.

Warning!:

Not all web applications are safe to download. In order to protect

your phone and data, use Android Market to install web

applications. For more information, refer to “Downloading a New

Google Application” on page 152.

183

PC Connections

You can connect your device to a PC using an optional PC data

cable using various USB connection modes. Mass storage is the

default connection method.

Mass storage

: allows you to use the onboard storage capacity of the

phone to store and upload files. This option allows your computer to

detect the phone as a removable storage drive.

Kies air

: allows you to

sync your Windows PC wirelessly with your

phone provided they are both on the same Wi-Fi network.

Connecting as a Mass Storage Device

You can connect your device to a PC as a removable disk and

access the file directory. If you insert a memory card in the

device, you can also access the files directory from the memory

card by using the device as a memory card reader.

Note:

The file directory of the memory card displays as a removable disk,

separate from the internal memory.

1. Press ➔ and then tap (

Settings

) ➔

Wireless and network

➔

USB utilities

➔

Connect storage to

Note:

To use any downloaded market application that requires a USB

connection between your phone and your PC, you should first set the

USB setting to

Mass storage

2. Connect the USB cable to the phone and connect the cable

to the computer.

3. Tap

Connect USB storage

. Both the phone and computer

display icons to show that the device is mounted. As soon

as the connection is established a drive letter is assigned

to the phone’s storage device.

A pop-up window displays on the PC when connected.

4. Open the folder to view files.

5. Copy files from the PC to the memory card.

Prior to using Kies air for Phone Update

Before using Kies air to upgrade your device, it is recommended

that you backup your personal data prior to use.

To export a Contact list to your microSD card:

1. From the Home screen, tap (

Contacts

2. Press and then tap

Import/Export

3. Tap

Export to SD card

➔

. For more information, refer to

“Export/Import” on page 98.

Connections 184

Verify your images and videos are on your microSD card:

1. From the Home screen, tap (

Applications

)

➔

(

Gallery

2. Verify the Gallery contains all of your pictures and videos.

3. Remove the back cover and remove the internal microSD

card prior to initiating a Kies air update.

Enabling USB Debugging

USB debugging must be enabled before being able to use the

Development feature.

1. Press ➔ and then tap (

Settings

) ➔

Applications

➔

Development.

2. Tap the

USB debugging

field to verify the feature is active

before connecting your USB cable.

3. Using an optional PC data cable, connect the multifunction

jack on your device to a PC.

Kies Air

Kies Air allows you to sync your Windows PC wirelessly with your

phone provided they are both on the same Wi-Fi network. You

can view and share call logs, videos, photos, music, bookmarks,

ringtones, and even send SMS messages from your PC.

Tip:

Before beginning, it is recommended that you update the Java

application running on your machine.

1. Sign onto the same Wi-Fi network from your phone and

from your PC.

2. From the Home screen, tap (

Applications

)

➔

(

Kies air

3. From the Kies air homescreen, tap

Start

4. If prompted, select a network. Choose from either

Wi-Fi

Portable Wi-Fi hotspot

5. Write down the on-screen URL address.

Important!:

Both your phone and your computer must be connected to the

same Wireless Access Point (WAP).

6. From your computer, enter the URL in your Web browser.

185

7. If prompted, an Access Request prompt is displayed on

your device. Tap

Allow

to permit connection between the

computer and device.

8. On your computer, you may be prompted to run a Java

plugin for a TransferManagerApplet. Click

Run

9. Tap the

Remember for today

checkbox if you will be using

Kies air with the same PC later.

10. From your PC, a security warning may be displayed asking

if you want to run this application. Click

Run

to continue.

11. On your PC, the Kies air screen is displayed. On your

phone, the icon appears at the top of your screen.

12. Follow the on-screen instructions to view and share

information between your phone and PC.

13. Click a link from the left navigation pane to access one of

several device file categories such as:

•

[Device Name] - provides an overview of all the main categories.

•

Photos/Videos/Music

•

Ringtones

•

Bookmarks

•

Messages/Call Log/Contacts

•

File Explorer

•

Language settings

14. To exit the Kies air application, tap

Stop

on your device,

then close out the Web browser on your computer.

Wi-Fi

About Wi-Fi

Wi-Fi (short for "wireless fidelity") is a term used for certain

types of Wireless Local Area Networks (WLAN). Wi-Fi

communication requires access to an existing and accessible

Wireless Access Point (WAP). These WAPs can either be Open

(unsecured) as within most Hot Spots, or Secured (requiring

knowledge of the Router name and password).

Note:

After you complete a connection to an active Wi-Fi network, the Wi-Fi

Calling feature will automatically be enabled.

Activating Wi-Fi

By default, your device’s Wi-Fi feature is turned off (deactivated).

Activating Wi-Fi allows your device to discover and connect to

compatible in-range WAPs (Wireless Access Points).

1. Press ➔ and then tap (

Settings

) ➔

Wireless and network

➔

Wi-Fi settings

Connections 186

2. Tap

Wi-Fi

to activate the feature. A checkmark indicates

that Wi-Fi is active. The device scans for available in-range

wireless networks and displays them under Wi-Fi networks

on the same screen.

Connecting to a Wi-Fi Network

1. Press ➔ and then tap (

Settings

) ➔

Wireless and network

➔

Wi-Fi settings

The network names and security settings (Open network or

Secured with WEP) of detected Wi-Fi networks display in

the Wi-Fi networks section.

2. Tap the network you wish to connect to.

Note:

When you select an open network you are automatically connected.

3. Enter a wireless password (if necessary).

4. Tap

Connect

Manually Add a New Network Connection

1. Tap

Add Wi-Fi network

2. Enter the Network SSID (the name of your Wireless Access

Point).

3. Tap the

Security

field and select a security option. This

must match the current security setting on your target

WAP.

4. Enter your WAP’s password if the WAP is secure.

5. Tap

Save

to store the new information and connect to the

target WAP.

Note:

No prompt to enter the WAP key displays if this is the second time to

connect to a previously accessed or secured wireless network. The

WAP key is required when the device is reset using factory default

settings.

This device is capable of operating in 802.11a mode. For 802.11a devices operating in the frequency range of 5.15

~ 5.25 GHz, they are restricted for indoor operations to reduce any potential harmful interference for Mobile Satellite

Services(MSS) in the US. WIFI Access Points that are capable of allowing your device to operate in 802.11a mode

(5.15 ~ 5.25 GHz band) are optimized for indoor use only. If your WIFI network is capable of operating in this mode,

please restrict your WIFI use indoors not to violate Federal Regulations to protect Mobile Satellite Services

187

Deactivating Wi-Fi

1. Press ➔ and then tap (

Settings

) ➔

Wireless and network

➔

Wi-Fi settings

2. Tap the

Wi-Fi

field to deactivate the feature. The

checkmark grays.

– or –

Activate and Deactiavte Wi-Fi from the Notification bar.

Note:

Use of wireless data connections such as Wi-Fi and Bluetooth can

reduce battery life and use times.

Manually Scan for a Wi-Fi Network

1. Press ➔ and then tap (

Settings

) ➔

Wireless and networks

➔

Wi-Fi settings

2. Press and then tap

Scan

Wi-Fi Status Indicators

The following icons indicate the Wi-Fi connection status:

Displays when Wi-Fi is connected, active, and

communicating with a Wireless Access Point (WAP).

Displays when Wi-Fi is active and there is an available

open wireless network.

Displays when Wi-Fi is configured for a direct

connection to another compatible device in the same

direct communication mode.

Wi-Fi Advanced Settings

The Wi-Fi settings - Advanced menu allows you to set up many of

the device’s Wi-Fi services, including:

•

Setting the Wi-Fi sleep policy

•

Viewing the device’s MAC Address

•

Configuring use of either a DHCP or Static IP

To access the Wi-Fi Advanced Settings menu:

1. Press ➔ and then tap (

Settings

) ➔

Wireless and network

➔

Wi-Fi settings

2. Press and then tap

Advanced

Tethering

This option allows you to share your phone’s mobile data

connection via a direct USB connection between your phone and

computer. A wireless version of this same functionality would be

the Mobile AP feature.

Connections 188

Note:

You can not mount your phone’s microSD card to your computer while

using the USB tethering feature. If additional software or USB drivers

are required, navigate to: http://www.samsung.com/us/support/

downloads.

1. Press ➔ and then tap (

Settings

) ➔

Wireless and network

➔

Tethering and portable hotspot

2. Plug in the USB cable between your computer and your

phone.

3. When prompted for a USB mode, press to exit the

menu.

4. Tap

USB tethering

from the Tethering menu. This places a

green check mark next to the entry and activates the

feature. A Tethering or Hotspot active notification briefly

appears on the screen.

Look for the Tethering active icon in the Status bar

area of the screen.

To disconnect tethering:

1. Press ➔ and then tap (

Settings

) ➔

Wireless and network

➔

Tethering and portable hotspot

2. Tap

USB tethering

from the Tethering menu to remove the

check mark and deactivate the feature.

3. Remove the USB cable from the phone.

Portable Wi-Fi Hotspot

This feature allows you to turn your phone into a Wi-Fi hotspot.

The feature works best when used in conjunction with HSPA+

(4G) data services (although 3G service can also be used).

Important!:

The Mobile AP service can not be active at the same time as

Wi-Fi. Please close your Wi-Fi connection prior to launching the

Mobile AP service.

Note:

You must have a tethering plan on your account to use the Wi-Fi

hotspot. You can not use data on the device while it is being used as a

hotspot.

To activate the Portable Wi-Fi Hotspot service:

1. Press ➔ and then tap (

Settings

) ➔

Wireless and network

➔

Tethering and portable hotspot

2. Tap

Portable Wi-Fi hotspot settings

➔

3. Tap

Portable Wi-Fi hotspot

. This places a checkmark in the

adjacent field to activate the service.

4. Tap

Yes

to continue with the activation.

189

5. Tap

Configure portable Wi-Fi hotspot

6. Create a new Network SSID name and then write it down.

7. Confirm the Mobile AP service icon appears at the

top of the screen.

Note:

By default, the connection is open and not secured. It is recommended

that you access the Portable Wi-Fi Hotspot settings and create a

secure connection by using a password for communication.

Note:

Using your 4G service and Portable Wi-Fi Hotspot drains your phone’s

battery at a much faster rate than when using any other feature

combination.

The best way to keep using the phone as a hotspot is to have it

connected to a power supply.

To connect to the Hotspot:

1. Enable Wi-Fi (wireless) functionality on your target device

(laptop, media device, etc.).

2. Scan for Wi-Fi networks from the device and select your

phone hotspot from the network list.

•

The SSID name for your phone’s hotspot is determined by what you

entered into the

Network SSID

field.

•

You can change the name by tapping

Configure portable Wi-Fi

hotspot

➔

Network SSID

and changing the entry.

3. Select this Hotspot and follow your on-screen instructions

to complete the connection.

4. Launch your Web browser to confirm you have an Internet

connection.

To secure the Portable Hotspot service:

The two most common methods for securing your connection to

the Hotspot are to a security method (WPA2 PSK) and to Hide

your phone’s SSID name.

1. Press ➔ and then tap (

Settings

) ➔

Wireless and network

➔

Tethering and portable hotspot

➔

Portable Wi-Fi hotspot settings

➔

Configure portable Wi-Fi

hotspot

2. Tap the

Security

field and select

WPA2 PSK

3. With security enabled, enter a new password into the

Password

field.

Important!:

The more complex the password, the harder it will be for

intruders to break your security. It is recommended that you not

use names, birthdays, or other personal information.

4. Tap

Save

to store the new settings.

Time Management 190

Section 11: Time Management

This section describes how you can manage time using time-

related applications such as the Calendar, Alarm Clock, Analog or

Digital clock, and the World clock.

Calendar

With the Calendar feature, you can consult the calendar by day,

week, or month, create events, and set an alarm to act as a

reminder.

1. From the Home screen, tap (

Applications

)

➔

(

Calendar

). The Calendar displays four tabs:

• Month

: displays the Month view.

•Week

: displays the Week view.

•Day

: displays the Day view.

•List

: allows you to search for events for the selected Month, Week,

or Day, or you can look for events for a future date.

2. Press and select one of the following options:

•Create

: creates a new Event.

•Go to

: displays a specific date.

•Today

: displays the date highlighted with a Blue box highlighting

the date.

•Search

: allows you to search within your current events.

• Delete

: allows you to delete All events, All events before today, or

an individual event.

• Settings

: displays a list of configurable settings.

Creating a Calendar Event

1. From the Home screen, tap (

Applications

)

➔

(

Calendar

2. From the Month tab, press ➔

Create

Calendar Settings

Using the Calendar settings you can select the day with which

you want the calendar to begin. You also select how you want to

view the calendar, by Month, Week, or Day or determine how to

manage events, notifications, sounds, and defaults reminders.

1. From the Home screen, tap (

Applications

)

➔ .

2. Press ➔

Settings

3. Tap

Calendars

and select the calendar categories you want

to display or tap

All calendar

. A check mark indicates

selection.

4. Tap

Default view

and select a view:

Month

Week

Day

, or

List

191

5. Tap

Day views

and select a type:

Time grid

, or

Event list

6. Tap

First day of week

and select either

Sunday

Monday

7. Tap

Hide declined events

to activate this option. A check

mark indicates selection.

8. Tap

Hide contacts’ anniversaries

to activate this option. A

check mark indicates selection.

9. Tap

Lock time zone

(to lock event time based on your

current user-selected time zone). Select a time zone from

within the

Select time zone

field.

10. Tap

Set alerts & notifications

to adjust the event notification

method. Choose from:

Alert

Status bar notification

, and

Off

11. Tap

Vibration

to activate this notification option. Selections

are:

Always

Only in Silent mode

, or

Never

12. Tap

Select ringtone

to assign a ringtone to a calendar event

notification.

13. Tap

Calendar sync

and select the type of general

synchronization settings you want. A check mark indicates

selection.

Clock

This feature allows you to create an alarm to ring at a specified

time, track time in other parts of the world, use a stopwatch, or

set a timer.

䊳

From the Home screen, tap (

Applications

)

➔

(

Clock

Setting an Alarm

1. From the Home screen, tap (

Applications

)

➔

(

Clock

2. Tap (

Create alarm

3. Use the plus or minus symbols to enter the hour, and

minutes, then tap

(toggles depending on which

was last selected).

4. Tap the

Alarm repeat

field and touch the number of times

you want this alarm to repeat. Selections are:

One-time

event

Daily

Every weekday(Mon-Fri)

, or

Weekly

. If you

selected Weekly, a button row displays. Tap each day of

the week in which you want this alarm to repeat, then tap

Save

Time Management 192

5. Tap the

Alarm type

field and select one of the following:

Melody

Vibration

Vibration and melody

, or

Briefing

6. Slide the slider bar left or right in the

Alarm volume

field to

decrease or increase the alarm volume. A sample of the

volume level plays.

7. Tap the

Alarm tone

field and select one of the following:

Sounds

, or

Go to My files

. Locate a sound to use as an

alarm ringtone then tap

to activate the ringtone.

8. Tap the radio button to activate a tone for the

Snooze

. Tap

the field to assign a duration time (3 min, 5 min, 10 min,

15 min, or 30 min) and snooze repetition (1 time, 2 times,

3 times, 5 times, and 10 times).

•Duration

indicates the length of time the alarm will remain silent

between alarm notifications (snooze time).

• Snooze repeat

indicates the numbers of snooze sessions that are

assigned to this alarm. How many times will the snooze silence the

alarm.

9. Tap the radio button to activate

Smart alarm

which slowly

increases screen brightness and the volume of nature

tones to simulate dawn breaking.

Tap the field to assign a duration time (3 min, 5 min, 10

min, 15 min, or 30 min) and nature tone (Morning, Breeze,

Mist, Forest, Light, or Rain).

• Smart alarm Duration

category describes the length of time the

alarm will remain silent between alarm notifications (snooze time).

• Smart alarm Tone

category provides one of several nature sounds

that are used as the alarm tone.

10. Tap the

Name

field and enter a name for this Alarm.

11. Tap

Save

to store the new alarm event.

Turning Off an Alarm

䊳

To stop an alarm when it sounds, touch and slide to

the right.

Setting the Snooze Feature

䊳

To activate the Snooze feature after an alarm sounds,

touch and slide to the left. Snooze must first be set

in the alarm settings.

193

World Clock

This feature allows you to find out what time it is another part of

world.

1. From the Home screen, tap (

Applications

)

➔

(

Clock

2. Tap the

World clock

tab.

3. Tap (

Add city

) then scroll and select the desired city,

or tap in the search field to locate a city.

To assign DST settings:

1. Locate a desired city from the World Clock list.

2. Touch and hold a city and select

DST settings

3. Select a DST setting (Automatic, Off, 1 hour or 2 hours).

Stopwatch

This feature allows you to capture elapsed time while letting the

stopwatch keep running.

1. From the Home screen, tap (

Applications

)

➔

(

Clock

) ➔

Stopwatch

tab.

2. Tap

Start

to start the stopwatch counter.

3. Tap

Lap

to begin the lap time counter.

4. Tap

Stop

to stop the counter.

5. Tap

Restart

to restart the lap counter. You can have

multiple lap times.

6. Tap

Reset

to reset the counter.

Setting a Timer

1. From the Home screen, tap (

Applications

)

➔

(

Clock

) ➔

Timer

tab.

2. Tap the

min

, or

sec

field and use the on-screen keypad

to enter the hour, minute, or seconds. The timer plays an

alarm at the end of the countdown.

3. Tap

Start

to start the timer.

4. Tap

Stop

to stop the timer or

Reset

to reset the timer and

start over.

5. Tap

Restart

to resume the timer counter.

Configuring a Desk Clock

This feature lets you activate an on-screen clock that can be

viewed when the device is docked.

䊳

From the Home screen, tap (

Applications

)

➔

(

Clock

) ➔

Desk clock

tab.

Changing Your Settings 194

Section 12: Changing Your Settings

This section explains the sound and phone settings for your

device. It includes such settings as: display, security, memory, and

any extra settings associated with your phone.

Wireless and Networks

Using Flight mode

Flight mode allows you to use many of your phone’s features,

such as Camera, Games, and more, when you are in an airplane

or in any other area where making or receiving calls or data is

prohibited.

Important!:

When your phone is in Flight mode, it cannot send or receive any

calls or access online information or applications.

1. Press ➔ and then tap (

Settings

) ➔

Wireless and network

2. Tap

Flight mode

. A check mark displayed next to the

feature indicates Flight mode is active.

Activating Wi-Fi

1. Press ➔ and then tap (

Settings

) ➔

Wireless and network

➔

Wi-Fi settings

2. Tap

Wi-Fi

. A check mark displayed indicates Wi-Fi is

active.

Wi-Fi settings

Once set up for Wi-Fi connectivity, your phone automatically uses

Wi-Fi, when available, for all your mobile phone services.

1. Press ➔ and then tap (

Settings

) ➔

Wireless and network

➔

Wi-Fi settings

2. Configure the settings as desired.

The available connection types displayed with a security type

displayed next to them.

195

Network Notification

By default, when Wi-Fi is on, you receive notifications in the

Status bar anytime your phone detects an available Wi-Fi

network. You can deactivate this feature if you do not want to

receive notifications.

1. Press ➔ and then tap (

Settings

) ➔

Wireless and network

➔

Wi-Fi settings

2. Tap

Network notification

. A check mark displayed next to

the feature indicates Network notification is active.

3. Tap

Network notification

again to remove the check mark

and deactivate this feature.

WPS Button Connection

The WPS (Wi-Fi Protected Setup) button is a standard for easy

and secure wireless network set up and connections. To use

WPS, the connecting device must support WPS and be

compatible with Wi-Fi Protected Access (WPA) security. WPS can

automatically set up a random network name and WPA wireless

security for wireless Wi-Fi phones, routers, access points,

computers, adapters, and other electronic devices.

WPS allows you to push buttons instead of entering a network

name and wireless security PIN.

1. Press ➔ and then tap (

Settings

) ➔

Wireless and network

➔

Wi-Fi settings

2. Tap

WPS button connection

3. Press the WPS button on your Wi-Fi access point within 2

minutes.

Manually Adding a Wi-Fi Network

1. Press ➔ and then tap (

Settings

) ➔

Wireless and network

➔

Wi-Fi settings

2. Tap

Wi-Fi

to turn it on.

3. Tap

Add Wi-Fi network

4. Enter the SSID (Service Set Identifier) and Security settings

then tap

Save

Note:

An SSID is a unique key which identifies a wireless LAN. Its purpose is

to stop other wireless equipment from accessing your LAN — whether

accidentally or intentionally. To communicate, wireless devices must

be configured with the same SSID.

Changing Your Settings 196

Wi-Fi Direct Settings

You can configure your phone to connect directly with other Wi-Fi

capable devices. This is an easy way to transfer data between

devices. These devices must be enabled for

Wi-Fi direct communication. This connection is direct and not via

a hotspot or WAP.

Note:

Activating this feature will disconnect your current Wi-Fi network

connection.

1. Press ➔ and then tap (

Settings

) ➔

Wireless and network

➔

Wi-Fi Direct settings

2. Tap

Wi-Fi Direct

. A check mark displayed next to the

feature indicating it is enabled. Your phone will begin to

search for other devices enabled with Wi-Fi direct

connections.

3. After scan, tap a device name to begin the connection

process to another Wi-Fi Direct compatible device.

Note:

The target device must also have Wi-Fi Direct service active and

running before it can be detected by your device.

4. Tap

Connect

. The direct connection is then established.

5. When prompted to complete the connection, tap

. The

status field now reads “Connected” and your connected

device is listed within the Wi-Fi Direct devices listing.

Bluetooth settings

In this menu you can activate Bluetooth, view or assign a device

name, activate your phone so other Bluetooth devices can

discover it, or scan for other, available Bluetooth devices with

which to pair.

Activating Bluetooth

䊳

Press ➔ and then tap (

Settings

) ➔

Wireless and network

➔

Bluetooth settings

and tap

Bluetooth

to turn it on.

Note:

Bluetooth must be enabled prior to use.

197

Activating the Device Name

1. Press ➔ and then tap (

Settings

) ➔

Wireless and network

➔

Bluetooth settings

➔

Device name

The assigned device name displays.

2. Press to erase the current device name and enter a

new name for this device using the keyboard.

3. Tap

to confirm your setting.

Activating Visibility

䊳

Press ➔ and then tap (

Settings

) ➔

Wireless and network

➔

Bluetooth settings

➔

Visible

The phone is now activated for discovery other devices for

a period of time determined by the value set within the

Visible time-out menu.

Scanning for Devices

This option allows you to scan for active Bluetooth devices so you

can pair with them.

1. Press ➔ and then tap (

Settings

) ➔

Wireless and network

➔

Bluetooth settings

➔

Scan for devices

. Your phone begins scanning and lists any

discovered devices in the Bluetooth devices section.

2. Tap a device name to pair with the device.

Important!:

Some Bluetooth devices are secured and require a PIN number to

confirm and pair with them.

3. Enter a PIN to pair with the device, if one is required, and

tap

USB Utilities

1. Press ➔ and then tap (

Settings

) ➔

USB

utilities

➔

Connect storage to PC

2. If prompted, tap

to turn USB debugging mode off.

3. Plug in a compatible USB cable to begin using the device

for mass storage mode.

Changing Your Settings 198

Tethering

This option allows you to share your phone’s mobile data

connection via a direct USB connection between your phone and

computer. A wireless version of this same functionality would be

the Mobile AP feature.

Note:

You can not mount your phone’s microSD card to your computer while

using the USB tethering feature. If additional software or USB drivers

are required, navigate to: http://www.samsung.com/us/support/

downloads.

䊳

Press ➔ and then tap (

Settings

) ➔

Wireless and network

➔

Tethering and portable hotspot

For more information, refer to “Tethering” on page 187.

Mobile AP

This feature allows you to turn your phone into a Wi-Fi hotspot.

The feature works best when used in conjunction with HSPA+

(4G) data services (although 3G service can also be used).

Important!:

The Mobile AP service can not be active at the same time as

Wi-Fi. Please close your Wi-Fi connection prior to launching the

Mobile AP service.

For more information, refer to “Portable Wi-Fi Hotspot” on

page 188.

VPN settings

The VPN settings menu allows you to set up and manage Virtual

Private Networks (VPNs).

Important!:

Before you can use a VPN you must establish and configure one.

Adding a VPN

Before you add a VPN you must determine which VPN protocol to

use: PPTP (Point-to-Point Tunneling Protocol), L2TP (Layer 2

Tunneling Protocol), L2TP/IPSec PSK (Pre-shared key based

L2TP/IPSec), or L2TP/IPSec CRT (Certificate based L2TP/IPSec).

1. Press ➔ and then tap (

Settings

) ➔

Wireless and network

➔

VPN settings

2. Tap

Add VPN

To establish a PPTP (Point-to-Point Tunneling Protocol):

1. Establish a VPN name (a name for this connection).

2. Set the VPN server.

3. Enable encryption (if desired).

4. Set the DNS search domains.

199

To establish a L2TP (Layer 2 Tunneling Protocol):

1. Establish a VPN name (a name for this connection).

2. Set the VPN server.

3. Enable L2TP secret.

4. Set L2TP secret.

5. Set the DNS search domains.

To establish a L2TP/IPSec PSK (Pre-shared key based L2TP/IPSec):

1. Establish a VPN name (a name for this connection).

2. Set the VPN server.

3. Set IPSEc pre-shared key.

4. Enable L2TP secret.

5. Set L2TP secret.

6. Set the DNS search domains.

To establish a L2TP/IPSec CRT (Certificate based L2TP/IPSec):

1. Establish a VPN name (a name for this connection).

2. Set the VPN server.

3. Enable L2TP secret.

4. Set L2TP secret.

5. Set user certificate.

Note:

A user certificate must be installed to use this setting.

6. Set CA certificate.

Note:

A CA certificate must be installed to use this setting.

7. Set the DNS search domains.

Near Field Communication

This feature is used to read and exchange tags. For more

information, refer to “Tags” on page 166.

1. Press ➔ and then tap (

Settings

) ➔

Wireless and network

2. Tap the

NFC

field. A check mark displayed next to the

feature indicating it is enabled.

Changing Your Settings 200

Mobile networks

Before you use applications such as Google Maps and find your

location or search for places of interest, you must enable the

Mobile networks options.

䊳

Press ➔ and then tap (

Settings

) ➔

Wireless and network

➔

Mobile networks

The following options display:

Use packet data

Allows you to activate data usage on your phone.

䊳

Press ➔ and then tap (

Settings

) ➔

Wireless and network

➔

Mobile networks

➔

Use packet data

Data Roaming

Data roaming allows you to connect to your service provider’s

partner networks and access data services when you are out of

your service providers area of coverage.

1. Press ➔ and then tap (

Settings

) ➔

Wireless and network

➔

Mobile networks

2. Tap

Data roaming

to connect to data services while

roaming outside your network.

– or –

Tap

Data roaming

again to remove the green check mark

and deactivate the feature.

Access Point Names

To access a wireless access point:

䊳

Press ➔ and then tap (

Settings

) ➔

Wireless and network

➔

Mobile networks

➔

Access Point

Names

. A list of the Access point names display. The active

access point displays a bright green, filled circle to the

right of the name.

Network mode

You can configure your phone to either manually detect and use

either a 2G (GSM) or 3G (WCDMA) data network connection.

䊳

Press ➔ and then tap (

Settings

) ➔

Wireless and network

➔

Mobile networks

➔

Network

Mode

201

Using the 4G Network

To confirm you are always using the fastest possible connection,

the phone has an automatic detection method where it finds both

the fastest and most stable connection/communication method.

This phone is capable of using either 4G/3G services for this

connection.

Note:

WCDMA is only available on the 4G network.

1. Press ➔ and then tap (

Settings

) ➔

Wireless and network

➔

Mobile networks

➔

Network

Mode

2. Tap

GSM/WCDMA (auto mode)

. A check mark displays next

to this option to indicate that it is active. This is the default

mode for this phone.

Using the 2G (EDGE) Network

If you are not using applications that require the 3G network

speed (any application that accesses the network or uses a

browser), using the 2G network saves battery life.

1. Press ➔ and then tap (

Settings

) ➔

Wireless and network

➔

Mobile networks

➔

Network

mode

2. Tap

GSM only

. A check mark displays next to this option to

indicate that it is active.

Note:

Connecting to 2G networks slows the data transfer speed and time.

Using the 3G Network

If you are using applications that require the 3G network speed,

follow these instructions to connect to the 3G network.

1. Press ➔ and then tap (

Settings

) ➔

Wireless and network

➔

Mobile networks

➔

Network

mode

2. Tap

WCDMA only

. A check mark displays next to this option

to indicate that it is active.

Network Operators

Using this feature you can view the current network connection.

You can also scan and select a network operator manually, or set

the network selection to Automatic.

1. Press ➔ and then tap (

Settings

) ➔

Wireless and network

➔

Mobile networks

2. Tap

Network operators

. The current network connection

displays at the bottom of the list.

Changing Your Settings 202

Important!:

You must deactivate data service prior to searching for an

available network.

3. Tap

Search now

to manually search for a network.

4. Tap

Select automatically

to automatically select a network

connection.

Note:

Connecting to 2G networks slows the data transfer speed and time.

Default Setup Options

Your phone default is set to Automatic (to automatically search

for an available network. You can set this option to Manual to

select a network each time you connect.

1. Press ➔ and then tap (

Settings

) ➔

Wireless and network

➔

Mobile networks

➔

Network

operators

2. Tap

Default setup

3. Tap

Manual

to locate and connect to a network manually.

– or –

Tap

Automatic

to allow the device to automatically select a

network.

Call Settings

To access the Call settings menu:

䊳

Press ➔ and then tap (

Settings

) ➔

Call

– or –

From the Home screen, tap ➔

Settings

➔

Call

Configuring General Call Settings

Configure the general call settings using this option.

1. From the Home screen, tap ➔

Settings

➔

Call

2. Tap one of the following options:

• Call rejection

: allows you to manage your rejection mode and

rejection list.

–

Auto reject mode

: sets the phone to automatically reject incoming

calls or messages.

–

Auto reject list

: provides access to current rejection entries and

numbers.

• Set reject messages

: allows you to manage both existing rejection

messages and create new ones.

203

• Call alert

: allows you to assign call alert tones and activate call

alerts and vibration.

–

Answer vibration

: vibrates the phone when the called party answers.

–

Call status tones

: assigns sounds settings during the call. Choose

from: Call connect tone, Minute minder, and Call end tone.

–

Alerts on call

: selects whether alarm and message notification is

turned off during a call.

• Call answering/ending

: allows you to manage the settings for

answering and ending calls.

–

Answering key

allows you to press a key to answer the phone.

–

Automatic answering

, when connected, automatically answers a call

via the headset after a period of time. Selections are: Off, after 1

second, after 2 seconds, after 3 seconds, after 4 seconds, or after

5 seconds.

–

Power key ends calls

allows you to press the power key to end the

current call.

• Turn on proximity sensor

: allows you to turn off the LCD when the

phone is near your face during a call so you do not accidentally tap

a key.

• Call forwarding

: configures call forwarding options.

•TTY mode

: allows you to configure the TTY settings. For more

information, refer to

“TTY Mode”

on page 204.

• Hearing aids

: allows you to enable/disable hearing aid

compatibility. For more information, refer to

“HAC Mode”

page 204.

• Additional settings

: allows you to configure additional call settings.

For more information, refer to

“Configuring Additional Voice

Call Settings”

on page 204.

Configuring Call Forwarding

1. Press ➔ and then tap (

Settings

) ➔

Call

➔

Call Forwarding

2. Tap an available option:

• Always forward

: incoming calls are re-routed to a secondary

number that you specify.

• Forward when busy

: forwards all your calls to voicemail when your

phone is busy.

• Forward when unanswered

: automatically forwards to your

voicemail number when the phone is not answered, and otherwise

allows you to enter a voicemail number.

• Forward when unreachable

: automatically forwards to your

voicemail number when the phone is not in service, or is turned off.

Changing Your Settings 204

TTY Mode

A TTY (also known as a TDD or Text Telephone) is a

telecommunications device that allows people who are deaf,

hard of hearing, or who have speech or language disabilities, to

communicate by telephone.

Your phone is compatible with select TTY devices. Please check

with the manufacturer of your TTY device to ensure that it is

compatible with digital cell phones.

Your phone and TTY device will connect via a special cable that

plugs into your phone’s headset jack. If this cable was not

provided with your TTY device, contact your TTY device

manufacturer to purchase the connector cable.

1. Press ➔ and then tap (

Settings

) ➔

Call

➔

TTY mode

2. Tap

Full TTY

to activate the feature, or

TTY mode off

deactivate the feature. Off is the default setting.

HAC Mode

This menu is used to activate or deactivate Hearing Aid

Compatibility for this device.

1. Press ➔ and then tap (

Settings

) ➔

Call

2. Tap the

Hearing aids

field to activate the feature (green

check mark), or tap it again to deactivate the feature. Off is

the default setting.

Configuring Additional Voice Call Settings

1. Press ➔ and then tap (

Settings

) ➔

Call

➔

Additional settings

2. Tap one of the following options:

• Caller ID

: chooses whether your number is displayed when

someone answers your outgoing call. Choose from: Network

default, Hide number, or Show number.

• Call barring

: blocks specific types of calls (All outgoing calls,

International calls, etc..).

• Call waiting

: notifies you of an incoming call while you are on

another call.

205

• Auto redial

: automatically redial the dialed number if it is unable to

connect or the call is cut off.

• Fixed Dialing Numbers

: see description below.

Fixed Dialing Numbers

Fixed Dial Number (FDN), allows you to restrict outgoing calls to a

limited set of phone numbers.

Enabling FDN

1. Press ➔ and then tap (

Settings

) ➔

Call

➔

Additional settings

➔

Fixed Dialing Numbers

2. Tap

Enable FDN

3. At the prompt, enter your PIN2 code and tap

Important!:

Not all SIM cards use a PIN2 code. If your SIM card does not, this

menu does not display.

The PIN2 code is provided by your carrier. Entering an incorrect

PIN2 code could cause the phone to lock. Contact customer

service for assistance.

Changing the PIN2 Code

1. Press ➔ and then tap (

Settings

) ➔

Call

➔

Additional settings

➔

Fixed Dialing Numbers

2. Tap

Change PIN2

3. At the prompt, enter your old PIN2 code.

4. At the prompt, enter a new PIN2 code.

5. Confirm your PIN2 code.

Important!:

Not all SIM cards use a PIN2 code. If your SIM card does not, this

menu does not display.

The PIN2 code is provided by your carrier. Entering the PIN2

incorrectly three times will cause the device to lock. Contact

customer service for assistance.

Managing the FDN List

When this feature is enabled, you can make calls only to phone

numbers stored in the FDN list on the SIM card.

1. Press ➔ and then tap (

Settings

) ➔

Call

➔

Additional settings

➔

Fixed Dialing Numbers

2. Tap

Enable FDN

3. At the prompt, enter your PIN2 code and tap

FDN is enabled.

Changing Your Settings 206

4. Tap

FDN list

then press and then tap

Add contact

edit the contacts that were stored.

Important!:

Not all SIM cards use a PIN2 code. If your SIM card does not, this

menu does not display.

The PIN2 code is provided by your carrier. Entering the PIN2

incorrectly three times will cause the device to lock. Contact

customer service for assistance.

Voicemail

You can view your voicemail number from this menu.

1. Press ➔ and then tap (

Settings

) ➔

Call

➔

Voicemail service

2. Tap

My carrier

3. Tap

Voicemail

➔

Voicemail number

to now view your

number within the Voicemail number field.

Sound Settings

From this menu you can control the sounds on the phone as well

as configure the display settings.

䊳

Press ➔ and then tap (

Settings

) ➔

Sound

The following options display:

Silent mode

Silent mode is convenient when you wish to stop the phone from

making noise, in a theater for example. In Silent Mode the

speaker is muted and the phone only vibrates to notify you of

incoming calls, or other functions that normally have a defined

tone or sound as an alert.

1. Press ➔ and then tap (

Settings

) ➔

Sound

2. Tap

Silent mode

– or –

From the Home screen, press and hold the

Lock

key until

Phone options

displays.

3. Tap

Silent mode

to activate or deactivate this mode (the

current mode displays).

Setup Phone Vibration

1. Press ➔ and then tap (

Settings

) ➔

Sound.

2. Tap

Vibration

and select a vibration mode. Choose from:

Always

Never

Only in silent mode

, or

Only when not in silent

mode

207

Note:

The Phone vibrate setting is independent of other call sounds settings.

For example, if you have Silent mode enabled along with Phone

vibrate, your phone won’t play a ringtone, but will vibrate for an

incoming call.

Note:

Use both the Silent mode and enable the

Only when not in silent mode

option to guarantee no vibrations or sounds from your phone.

Adjusting the Volume Settings

The Volume menu now provides access to various volume

settings within one on-screen popup menu.

1. Press ➔ and then tap (

Settings

) ➔

Sound

➔

Volume

2. Touch and drag the on-screen slider to assign the volume

settings for any of the following volume levels.

• Incoming call

Media

System

, or

Notification

3. Tap

to assign the volume levels.

Setup the Voice Call Ringtone

1. Press ➔ and then tap (

Settings

) ➔

Sound

2. Tap

Phone ringtone

3. Tap a ringtone from the available list. The ringtone briefly

plays when selected.

4. Tap

to assign a ringer.

Setting a Notification Ringtone

1. Press ➔ and then tap (

Settings

) ➔

Sound

➔

Notification ringtone

2. Tap one of the ringtones and tap

Audible Tone Settings

The Audible touch tones and Audible selection options are used

when you use the dialing pad or making a screen selection. Each

time you press a key or make a selection the selected tone

sounds.

1. Press ➔ and then tap (

Settings

) ➔

Sound

2. Tap

Audible touch tones

Audible selection

. A check mark

displayed next to these features indicates active status.

Changing Your Settings 208

Screen Lock Sounds

The screen lock sounds option is used to activate/deactivate

sounds when locking and unlocking the screen.

1. Press ➔ and then tap (

Settings

) ➔

Sound

2. Tap

Screen lock sounds

. A check mark displayed next to

these features indicates active status.

Haptic Feedback and Vibration Intensity

Instead of sounding a tone, the Haptic feedback option vibrates

when you press soft keys on certain screens. You can also set the

intensity of the vibration using the Vibration intensity setting.

1. Press ➔ and then tap (

Settings

) ➔

Sound.

2. Tap

Haptic feedback

. A check mark displayed next to the

feature indicates Haptic feedback

is active.

3. Tap

Vibration intensity

then touch and drag the slider to

adjust the vibration intensity, then tap

Display Settings

In this menu, you can change various settings for the display

such as the font, orientation, pop-up notifications, puzzle lock

feature, animation, brightness, screen timeout, and power saving

mode.

Adjusting the Screen Display

1. Press ➔ and then tap (

Settings

) ➔

Display

2. Configure the following screen display settings:

• Screen display

–

Font style

: sets the fonts used on the LCD display. Selections are:

Default font or Get fonts online. Tap

Get fonts online

to download

additional fonts.

–

Home screen Wallpaper

: assigns an image from either the Gallery,

Live wallpapers, or Wallpaper gallery to the Home screen.

–

Lock screen Wallpaper

: assigns an image from either the

Wallpaper gallery or Gallery to the Lock screen.

–

Lock screen Clock position

: assigns the on-screen clock position

to either the top, MIddle or Bottom of the screen.

–

Lock screen Event notifications

: assigns what type of on-screen

notification you are prompted with. Choose from either: New

messages or New emails.

209

• Brightness

: adjusts the on-screen brightness level. For more

information, refer to

“Adjusting Screen Brightness”

page 209.

• Auto-rotate screen

: when enabled, the phone automatically

switches from portrait to landscape orientation and vice versa.

When this setting is disabled, the phone displays in portrait mode

only.

•Animation

: determines whether some or all of the window

elements animate. Selections are: No animations, Some

animations, or All animations.

• Screen timeout

: adjusts the delay time before the screen

automatically turns off. Selections are: 15 seconds, 30 seconds,

1 minute, 2 minutes, 10 minutes, and 30 minutes.

• Touch key light duration

: to adjust the light duration of the touch

keys.

• Auto adjust screen power

: adjusts the phone’s LCD brightness

level to automatically adjust and conserve battery power.

• Horizontal calibration

: uses the accelerometer to calibrate the

phone when held in a horizontal position.

• Gyroscope calibration

: uses the built-in gyroscope to calibrate

motion when the phone is in motion.

Adjusting Screen Brightness

This feature configures the LCD Brightness levels.

1. Press ➔ and then tap (

Settings

) ➔

Display

➔

Brightness

2. Tap

Automatic brightness

to allow the phone to self-adjust

and tap

– or –

Touch and slide the on-screen slider to adjust the level and

tap

Changing Your Settings 210

Horizontal Calibration

Calibrate your phone by using the built-in accelerometer.

1. Press ➔ and then tap (

Settings

) ➔

Display

➔

Horizontal calibration

2. Place the phone on a level surface and tap

Calibrate

. The

phone adjusts the level of the accelerometer. During the

calibration process a green circle appears on-screen and

the center circle adjusts to the center position.

Gyro Sensor Calibration

Calibrate your phone by using the built-in gyroscope.

1. Press ➔ and then tap (

Settings

) ➔

Display

➔

Gyroscope calibration

2. Place the phone on a level surface and tap

Calibrate

. The

phone adjusts the level of the accelerometer. During the

calibration process a green circle appears on-screen and

the center circle adjusts to the center position.

Power Saving Mode

This feature allows you both automatically set the phone to use a

power saving mode and configure additional power saving

options manually, all in an effort to conserve battery power.

1. Press ➔ and then tap (

Settings

) ➔

Power

saving mode

2. Confirm appears at the top of the screen. This

indicates the power saving mode is active.

To automatically enable power saving options:

1. Press ➔ and then tap (

Settings

) ➔

Power

saving mode

2. Tap

Use Power saving mode

to enable this feature when the

battery level is low.

3. Tap

Power saving mode on at

to assign the “battery low”

level at which the power saving mode is activated. It is at

this level that the automatic power saving function will

“kick in”.

4. Tap

to store the new battery level.

211

To activate additional power saving features:

1. Activate Power saving mode.

2. Tap any of the available fields to activate additional power

saving parameters. Choose from:

• Turn Off Wi-Fi

to disable Wi-Fi when it is not connected to an AP.

• Turn Off Bluetooth

to disable Bluetooth when not in use or actively

transmitting data.

• Turn Off GPS

to disable the GPS location system when not in use.

• Turn off Sync

to disable the feature when the phone is not

synchronizing with the server.

• Brightness

to adjust the brightness of the screen. For more

information, refer to

“Adjusting Screen Brightness”

page 209.

• Screen timeout

to adjust the time delay before the screen turns off.

• Power saving tips

to display additional on-screen power saving

information.

Location and Security

The Location and Security settings allow you to configure phone

location and security settings.

Using Wireless Networks

Before you use applications such as Google Maps and find your

location or search for places of interest, you must enable the Use

wireless networks option or enable the GPS satellites.

1. Press ➔ and then tap (

Settings

) ➔

Location and security

2. Tap

Use wireless networks

to enable location information

using the wireless network.

Enabling the GPS Satellites

1. Press ➔ and then tap (

Settings

) ➔

Location and security

2. Tap

Use GPS satellites

enable the GPS satellite.

Changing Your Settings 212

Enabling the sensor aiding

1. Press ➔ and then tap (

Settings

) ➔

Location and security

. For more information, refer to

“Enabling a Location source” on page 150.

2. Tap

Use sensor aiding

enhances positioning and save

power while using the sensors.

Screen Unlock Pattern Settings

To secure data and limit phone access, set the phone to require a

screen unlock pattern each time you turn on the device, or every

time the phone wakes up from sleep mode (when the screen

automatically turns off).

Setting an Unlock Pattern

Creating a screen unlock pattern increases security on the

phone. When you enable the User visible pattern field, you will

draw an unlock pattern on the screen whenever you want to

unlock the phone’s buttons or touch screen. When you activate

the User tactile feedback field, you feel vibration as feedback

while drawing the pattern.

Note:

Make sure the Require Pattern field is activated.

1. Press ➔ and then tap (

Settings

) ➔

Location and security

2. Tap

Set up screen lock

➔

Pattern

3. Read the instructions then tap

4. Review the onscreen animation procedure for drawing a

pattern and tap

when you are ready to draw a pattern.

5. Draw your pattern by touching your first on-screen point.

Then,

without removing your finger from the screen, drag

your finger over adjacent points until the gray trace line

overlaps each point

and they are highlighted with a green

circle.

6. When you have connected at least four dots in a vertical,

horizontal or diagonal direction, lift your finger from the

screen and tap

Continue

7. Confirm the new pattern by redrawing it and then tapping

Confirm

. The Unlock pattern is set.

213

Changing the Screen Lock Pattern

This feature allows you to change the previously stored unlock

pattern and update it if necessary. This process is similar to

changing your password from time to time.

1. Press ➔ and then tap (

Settings

) ➔

Location and security

2. Tap

Change screen lock

3. Retrace your current pattern on the screen.

4. Tap

Pattern

and repeat steps 3 - 7 from the previous

section.

Using a Visible Pattern

When enabled, this feature displays the onscreen lock grid that is

used to unlock the phone.

Using Tactile Feedback

When enabled, the User tactile feedback option, you will feel

vibration as feedback while drawing the pattern, using a PIN or

password lock.

PIN Lock and Unlock

1. Press ➔ and then tap (

Settings

) ➔

Location and security

2. Tap

Set up screen lock

3. Tap

4. Enter a PIN number using the numeric keypad and touch

Continue

to confirm the password.

5. Confirm the PIN by re-entering it and tap

to confirm.

Your phone now requires you to enter this PIN number in

order to unlock the phone.

Password Lock and Unlock

1. Press ➔ and then tap (

Settings

) ➔

Location and security

2. Tap

Set up screen lock

3. Tap

Password

4. Enter a password using the keypad and tap

Continue

confirm the password.

5. Confirm the password by re-entering it and tap

confirm.

Changing Your Settings 214

Setting up SIM Card Lock

Prevent another user from using your SIM card to make

unauthorized calls or from accessing information stored on your

SIM card by protecting the information using a PIN code.

1. Press ➔ and then tap (

Settings

) ➔

Location and security

2. Tap

Set up SIM card lock

3. Tap

Lock SIM card

, enter your SIM PIN code, then tap

Note:

You must activate Lock SIM card before you can change your SIM PIN

code.

To change an existing SIM Card PIN:

1. Tap

Change SIM PIN

2. Enter the old SIM PIN code and tap

3. Enter the new SIM PIN code and tap

4. Re-type the new SIM PIN code and tap

Password Settings

When you create a phone password you can also configure the

phone to display the password as you type it instead of using an

asterisk (*).

1. Press ➔ and then tap (

Settings

) ➔

Location and security

2. Tap

Visible passwords

to activate this feature.

Device Administration

Activating this feature allows Google to administrate your phone

in a way similar to IT security settings on a corporate PC. This

would be beneficial in the case that your phone was lost or

stolen. The phone could be “deactivated” or “restricted” (through

administration) from a remote location.

1. Press ➔ and then tap (

Settings

) ➔

Location and security

2. Tap

Select device administrators

to begin configuring this

setting.

3. Select an administrator device and follow the prompts.

215

Credential Storage

This option allows certain applications to access secure

certificates and other credentials. Certificates and credentials

can be installed to the SD card and password protected.

1. Press ➔ and then tap (

Settings

) ➔

Location and security

2. Tap

Use secure credentials

to activate this feature. A check

mark displayed next to the feature indicates secure

credentials is active.

3. Tap

Install from USB storage

to install encrypted certificates

from the USB Storage location.

4. Tap

Set password

to set or change the credential storage

password.

5. Tap

Clear storage

to clear the storage (SD card or phone

memory) of all contents and reset the credentials

password.

Applications

This phone can be used for Android development. You can write

applications in the SDK and install them on this device, then run

the applications using the hardware, system, and network. This

feature allows you to configure the device for development.

Warning!:

Android Dev Phones are not intended for non-developer

end-users. Because the device can be configured with system

software not provided by or supported by Google or any other

company, end-users operate these devices at their own risk.

Unknown Sources

Before you can download a web application you must enable the

Unknown sources feature (enables downloading). Developers can

use this option to install non-Market applications.

1. Press ➔ and then tap (

Settings

) ➔

Applications

2. Tap

Unknown sources

to active this feature.

Note:

If you are notified that you can not download a Market application

because it comes from an “Unknown source”, enabling this option

corrects this issue.

Changing Your Settings 216

Managing Applications

This feature allows you to manage installed applications. You can

view and control currently running services, or use the device for

application development.

You can also view the amount of memory or resources used as

well as the remaining memory and resources for each of the

applications on your phone and clear the data, cache, or defaults.

䊳

Press ➔ and then tap (

Settings

) ➔

Applications

➔

Manage applications

Clearing Application Cache and Data

Important!:

You must have downloaded applications installed to use this

feature.

1. Press ➔ and then tap (

Settings

) ➔

Applications

➔

Manage applications

2. Tap an application in which to clear the cache or data.

3. Tap

Force stop, Clear data

, or

Clear cache

Uninstalling Third-party Applications

Important!:

You must have downloaded applications installed to use this

feature.

1. Press ➔ and then tap (

Settings

) ➔

Applications

➔

Manage applications

2. Tap the

Downloaded

tab and select your desired

application.

3. Tap

Uninstall

(from within the top area of the Application

info page).

4. At the prompt, tap

to uninstall the application.

5. Select a reason for uninstalling the application, then tap

217

Moving Third-party Applications to your SD Card

Your phone’s built in memory is augmented by using a microSD

card to store additional data. When the phone’s built-in memory

capacity is reached, it can be possible to move some applications

over to the internal microSD card. Freeing up memory space on

the phone can help avoid any sluggish performance when the

phone has to work harder to manage memory resources.

Important!:

Only certain downloaded applications are capable of being

moved from phone to card.

1. Press ➔ and then tap (

Settings

) ➔

Applications

➔

Manage applications

2. Tap the

Downloaded

tab and select your desired

application.

3. Tap

Move to SD card

(from within the Storage section of the

Application info page).

Once the application has been moved to the microSD card, this

button now reads “Move to phone”.

Running Services

The Running services option allows you to view and control

currently running services such as Backup, Google Talk, SNS

(messaging), Swype, and more.

1. Press ➔ and then tap (

Settings

) ➔

Applications

➔

Running services

The screen displays all the processes that are running.

2. Tap a process to stop the process from running.

When you stop the process the service or application will

no longer run until you start the process or application

again.

Important!:

Stopping a process might have undesirable consequences on the

application.

Changing Your Settings 218

Memory Usage

This option allows you to view a list of the memory usage for

currently active applications.

1. Press ➔ and then tap (

Settings

) ➔

Applications

➔

Memory usage

. The All tab is opened and

displays a list of the current applications.

2. Press and then tap

Sort by name/size

to change the

list from being sorted either alphabetically or by largest

memory usage.

Battery Usage

This option allows you to view a list of those components using

battery power.

1. Press ➔ and then tap (

Settings

) ➔

Applications

➔

Battery use

2. Press and then tap

Refresh

to update the list.

– or –

Tap an entry to view more detailed information.

Android Development

䊳

Press ➔ and then tap (

Settings

) ➔

Applications

➔

Development

Important!:

These features are used for development purposes only.

USB Debugging

This feature is used for development purposes only.

Allowing Mock Locations

This feature is used for development purposes only.

If you are a developer who is testing a GPS applications using

this device, you can tell the device that the phone is at different

GPS locations. In other words, the phone is allowed to “mock”

the coordinates.

219

Accounts and Synchronization

Your phone provides the ability to synchronize data from a variety

of different sources or sites. These accounts can range from

Google, a Corporate Microsoft Exchange Email Server, and other

social sites such as Facebook, Twitter, and MySpace. Corporate

and Google accounts provide the ability to synchronize Calendar

events and Contacts.

To enable the auto-sync feature:

1. Press ➔ and then tap (

Settings

) ➔

Accounts and sync

2. Tap

Auto-sync

. A green checkmark indicates the feature is

enabled. This feature enables the synchronization of data

between your phone and external sites or servers.

•

The three main components are Contacts Email, and Calendar

Events. Before these can be synchronized, they must be added to

the managed accounts list.

• Background data

: allows your phone to use data in the

background.

Synchronizing a Google Account

By default, there are no accounts managed by the device. These

must be manually added.

To manage an existing Google account

1. Press ➔ and then tap (

Settings

) ➔

Accounts and sync

2. Tap

Add account

➔

Google

3. Tap

➔

Note:

If you do not already have a Google account, tap

Create

and follow the

on-screen prompts to create your new account.

4. Tap the

Username

(@gmail.com) and

Password

fields and

enter your information.

5. Tap

. Your phone then communicates with the

Google servers to confirm your information. Your existing

Gmail account then appears within the

Manage accounts

area of the screen.

•

Any changes or updates to your Gmail account are then

automatically updated to your device.

Changing Your Settings 220

To configure the Google management settings:

1. Press ➔ and then tap (

Settings

) ➔

Accounts and sync

2. Tap within the Google account field to reveal the

account’s synchronization settings screen.

3. Tap the parameters you wish to synchronize (

Sync Books

Sync Contacts

Sync Gmail

, or

Sync Calendar

). A green

checkmark indicates the feature is enabled.

4. Press to return to the previous screen.

For more information, refer to “Synchronizing Contacts”

on page 95.

Synchronizing Your Corporate Account

By default, there are no Corporate Calendar events managed by

the device. These must be manually added.

Note:

Once a corporate email account is created, it is automatically added as

a managed account.

Use the following procedure to configure your phone to

synchronize with a corporate email account.

1. From the Home screen, tap

(

Applications

)➔

Settings

➔

Accounts and sync

– or –

Press ➔ and then tap (

Settings

) ➔

Accounts and sync

2. Locate the email account containing the events you wish to

synchronize.

3. Tap within the adjacent account field to reveal the

account’s synchronization settings screen.

4. Toggle the check mark adjacent to either the

Sync Contacts

Sync Calendar

fields to manually sync the account.

221

Motion Settings

This feature allows you to assign specific functions to certain

phone actions that are detected by both the accelerometer and

gyroscope.

To activate motion:

䊳

Press ➔ and then tap (

Settings

) ➔

Motion

➔

Motion activation

Note:

If Motion activation is not enabled, all motion services are greyed-out

and disabled.

To activate different motion functions:

1. Activate and configure any of the following motion

features.

• Turn over

activates the mute function for incoming calls and

playing sounds.

•Tilt

reduces or enlarges the screen while in the Gallery or Browser.

–

Adjust the sensitivity slider and tap

• Panning

allows you to move icons one at a time, to another page in

the Home or Applications pages.

–

Adjust the sensitivity slider and tap

• Double tap

allows you to activate voice commands within Voice

talk.

• Tutorials

provide on-screen visual explanations of the above

features.

Privacy Settings

Location settings, backup configurations, or reset the phone to

erase all personal data.

䊳

Press ➔ and then tap (

Settings

) ➔

Privacy

Mobile Backup and Restore

The phone can be configured to back up your current settings,

application data and settings.

1. Press ➔ and then tap (

Settings

) ➔

Privacy

2. Tap

Back up my data

to create a backup of your current

phone settings and applications.

3. Tap

Automatic restore

to assist in the re-installation of a

previously installed application (including preferences and

data).

Changing Your Settings 222

Prior to doing a Factory Reset

Before using Kies air to upgrade your device or initiating a factory

reset, it is recommended that you backup your personal data

prior to use.

To export a Contact list to your microSD card:

1. From the Home screen, tap (

Contacts

2. Press and then tap

Import/Export

3. Tap

Export to SD card

➔

. For more information, refer to

“Export/Import” on page 98.

Verify your images and videos are on your microSD card:

1. From the Home screen, tap (

Applications

)

➔

(

Gallery

2. Verify the Gallery contains all of your pictures and videos.

3. Remove the back cover and remove the internal microSD

card prior to initiating a Kies air update.

Factory Data Reset

From this menu you can reset your phone and sound settings to

the factory default settings.

1. Press ➔ and then tap (

Settings

) ➔

Privacy

. (You will see a disclaimer.)

2. Tap

Factory data reset

➔

Reset

phone.

3. If necessary, enter your password and touch

Erase

everything

The phone resets to the factory default settings

automatically and when finished displays the Home

screen.

Note:

Select

Format USB storage

to also erase all data on the USB storage.

SD Card & Phone Storage

From this menu you can view the memory allocation for the

memory card as well as mount or unmount the SD card.

For more information about mounting or unmounting the SD card,

see “Using the SD Card” on page 51.

223

To view the memory allocation for your external SD card:

䊳

Press ➔ and then tap (

Settings

) ➔

Storage.The available memory displays under the Total

space and Available space headings.

Search Settings

You can use your phone's search preferences to configure some

aspects of Google Web search (for example, whether it makes

suggestions below the Quick Search Box as you type), and what

phone features you want to include in searches.

1. Press ➔ and then tap (

2. Press ➔

Search settings

3. Tap any of the following search parameters to then alter

the settings:

• Google search

opens a screen where you can set your Google

search preferences.

–

Show web suggestions

: includes search matches from Google’s

online search engine.

–

Use My Location

: uses your My Location information for Google

search results and services.

–

Search history

: determines whether you also wish to included

personalized search history results in the list of matches.

–

Manage search history

: helps to manage the personalized search

history associated with your current registered Google account.

• Searchable items

: opens a screen where you can choose the

search categories included in device searches. such as:

Web,

Apps

Contacts

Memo, Messaging, Music, Slacker

Voice Search

• Clear shortcuts

: erases the history for recently selected search

results.

Language & Keyboard Settings

This setting allows you to configure the language in which to

display the menus. You can also set on-screen keyboard options.

䊳

Press ➔ and then tap (

Settings

) ➔

Language and keyboard

Language Settings

To set the language that the menus display on the phone:

1. Press ➔ and then tap (

Settings

) ➔

Language and keyboard

➔

Select language

2. Select a language and region from the list.

Changing Your Settings 224

Select Input Method

There are two input methods available: Swype and Samsung

keypad.

1. Press ➔ and then tap (

Settings

) ➔

Language and keyboard

➔

Select input method

2. Select an input method.

Swype Settings

For more information, refer to “SWYPE Settings” on page 73.

1. Press ➔ and then tap (

Settings

) ➔

Language and keyboard

➔

Swype

2. Tap one of the following Swype preferences to activate the

setting:

• Language

: allows you to select the current text input language.

Default language is US English.

• Audio feedback

: turns off sounds generated by the Swype

application.

• Vibrate on keypress

: activates a vibration sensation as you enter

text using the keypad.

• Show tips

: turns on an on-screen flashing indicator that provides

helpful user information.

Swype Advanced settings

Advanced settings provide access to Swype operation

parameters.

• Word suggestion

: uses a built-in word database to predict words

while entering text in Swype.

• Auto-spacing

: automatically inserts a space between words.

When you finish a word, just lift your finger or stylus and start the

next word.

• Auto-capitalization

: automatically capitalizes the first letter of a

sentence.

• Show complete trace

: determines whether or not to display the

complete Swype trace path on-screen.

• Speed vs. accuracy

: sets how quickly Swype responds to

on-screen input. Move the slider between Fast Response (speed) or

Error Tolerant (accuracy) and tap

• Personal dictionary

: helps to manage your personal dictionary.

• Reset Swype’s dictionary

: once enabled, deletes any words you

have added to Swype’s dictionary.

Swype Help settings

Help settings provide access to Swype help operation

parameters.

• Swype help

: displays the on-screen Swype User Manual.

• Tutorial

: provides an on-screen tutorial that shows you how to input

text faster in Swype input mode.

225

About

Provides information about the current Swype application

version.

Samsung Keyboard Settings

1. Press ➔ and then tap (

Settings

) ➔

Language and keyboard

➔

Samsung keypad

2. Tap

Portrait Keypad types

and select a text input method:

•

Qwerty Keypad

•

3x4 Keypad

3. Tap

Input languages

and select a language.

4. Tap

XT9

to use XT9 Predictive text method. For more

information, refer to “XT9 Advanced Settings” on

page 225. For more information, refer to “Text Input

Methods” on page 72.

5. Tap the

Keypad sweeping

field if you want to sweep the

keypad and change from ABC to ?123 mode. For more

information, refer to “Text Input Methods” on page 72.

6. Tap the

Character preview

field to automatically preview

new characters prior to entry.

7. Tap the

Auto-capitalization

field to automatically capitalize

the first letter of a sentence.

8. Tap

Voice input

to activate the Voice input feature. This is

an experimental feature that uses Google’s networked

speech recognition application.

9. Tap

Auto-full stop

to automatically insert a full stop by

tapping the space bar twice.

10. Tap the

Tutorial

field to view a short tutorial on use of the

Samsung keyboard.

XT9 Advanced Settings

The following XT9 Advanced settings are available when the XT9

field is selected.

1. Tap the

XT9

field to select XT9 (predictive text) mode, then

tap

XT9 advanced settings

2. Tap the

Word completion

field to enable word completion.

Your phone predicts how to complete the word typed.

3. Tap the

Word completion point

field then touch

2 letters

letters

4 letters

, or the

5 letters

radio button. Word

completion begins after 2 or more (depending on your

selection).

Changing Your Settings 226

4. Tap the

Spell correction

field. This option corrects

typographical errors by selecting from a list of possible

words that reflect the characters of the keys you touched

as well as the characters of nearby keys.

5. Tap the

Next word prediction

field to enable word

prediction.

6. Tap the

Auto-append

field to automatically add predictions.

7. Tap the

Auto-substitution

field to automatically replace

words that you are typing. This option assists with

correcting misspelled words.

8. Tap the

Regional correction

field. This option sets the

device to automatically correct mistyped words according

to normal spelling for your region.

9. Tap the

Recapture

field. This option sets the device to

re-display the word suggestion list when you select the

wrong word from the list.

10. To add a new word to the T9 dictionary:

Tap the

XT9 my words

field, then press and then tap

Add

. Enter the new word in the

field, then tap

Done

11. Tap

XT9 auto-substitution

to add words to substitute (for

example youve becomes you’ve). A list of substitutions

displays.

12. If you do not see the substitution you want, press

and then tap

Add

, then input the Shortcut word and

Substitution word.

13. Tap

Done

Voice Input and Output Settings

Configuring Voice Input Recognition

This feature allows the phone to correctly recognize verbal input.

1. Press ➔ and then tap (

Settings

) ➔

Voice input and output

➔

Voice recognition settings

2. Configure the available options to alter the settings

associated with this feature:

• Language

: selects an input language and associated dialect

recognition (if available).

• SafeSearch

: sets the explicit image filter settings. These settings

apply to only Google voice search results. Choose from:

Off

Moderate

, or

Strict

227

• Block offensive words

: allows you to block recognition of known

offensive words or language. (A green check mark indicates the

feature is active).

3. Press to return to the previous screen.

Configuring Text-to-speech

This feature allows the phone to provide a verbal readout of

on-screen data such as messages and incoming caller

information. This action is called TTS (Text To Speech).

1. Press ➔ and then tap (

Settings

) ➔

Voice input and output

➔

Text-to-speech settings

2. Configure the available options to alter the settings

associated with this feature:

• Listen to an example

: plays a short example of what the text-to-

speech feature sounds like on your device when activated.

• Driving mode

: incoming calls and new notifications are

automatically ready out loud.

• Driving mode settings

: selects those applications that will use TTS

while driving mode is activated. Choose from: Incoming call,

Message, New emails, New voicemail, Alarm, Schedule, or Unlock

screen.

• Always use my settings

: accepts an override of application

settings with personal configurations for this text-to-speech settings

screen. If enabled, your device defaults to using the text-to-speech

feature.

• Default engine

: sets the speech synthesis engine that will be used

for the spoken text. Choices include:

Pico TTS

• Install voice data

: confirms the installation of necessary data

required for voice synthesis.

• Speech rate

: adjusts the rate at which on-screen text is spoken by

the device. Choose from:

Very slow

Slow

Normal

Fast

, and

Very

fast

• Language

: assigns the language used for verbal readout. Choose

from German (Germany), English (United Kingdom), English (United

States), Spanish (Spain), French (France), or Italian (Italy).

• Samsung TTS

: configures the Samsung TTS settings for various

languages.

• Pico TTS

: configures the pico TTS settings for various languages.

Accessibility Settings

This service lets you enable and disable downloaded accessibility

applications that aid in navigating your Android device, such as

TalkBack (uses synthesized speech to describe the results of

actions), KickBack (provides haptic feedback for actions), and

SoundBack (plays sounds for various actions). Also lets you

enable use of the power key to end calls.

1. Press ➔ and then tap (

Settings

) ➔

Accessibility

Changing Your Settings 228

Note:

Initially, it might be necessary to download accessibility applications

from the Android Market.

2. Tap

Accessibility

to activate the feature, then select the

services for which you want data to log.

3. Select

The power key ends calls

field to activate this feature

which ends any current calls.

Dock Settings

This menu allows you to assign external speakers when the

device is docked.

1. Press ➔ and then tap (

Settings

) ➔

Dock settings

2. Tap

Audio output mode

. This enables the phone to output

audio when docked to a compatible device.

Date and Time

This menu allows you to change the current time and date

displayed.

1. Press ➔ and then tap (

Settings

) ➔

Date and time

2. Tap

Automatic

to allow the network set the date and time.

Important!:

Deactivate

Automatic

to manually set the rest of the options.

3. Tap

Set date

and use the plus or minus icons to set the

Month

Day

, and

Year

then tap

Set

4. Tap

Select time zone

, then tap a time zone.

5. Tap

Set time

and use the plus or minus icons, set

Hour

, and

Minute

. Tap

, then tap

Set

•

Optional: Touch

Use 24-hour format

. If this is not selected the

phone automatically uses a 12-hour format.

6. Tap

Select date format

and touch the date format type.

About Phone

This menu contains legal information, system tutorial

information, and other phone information such as the model

number, firmware version, baseband version, kernel version, and

software build number.

To access phone information:

䊳

Press ➔ and then tap (

Settings

) ➔

About

phone

. The following information displays:

• Status

: displays the battery status, the level of the battery

(percentage), the phone number for this device, the network

connection, signal strength, mobile network type, service state,

229

roaming status, mobile network state, IMEI number, IMEI SV, Wi-Fi

MAC address, Bluetooth address, and Up time.

• Battery use

: displays the applications or services (in percentages)

that are using battery power.

• Legal information

: This option displays information about Open

source licenses, License settings, as well as Google legal

information. This information clearly provides copyright and

distribution legal information and facts as well as Google Terms of

Service, Terms of Service for Android-powered Phones, and much

more pertinent information as a reference.

Read the information and terms, then press BACK to return to the

Settings menu.

Tip:

To find your device’s DivX® registration code and information about

registering your device to play DivX protected video, tap

License settings

➔

DivX® VOD

• Model number

: displays the device’s model number.

• Android version

: displays the firmware version loaded on this

device.

• Baseband version

: displays the baseband version loaded on this

device.

• Kernel version

: displays the kernel version loaded on this device.

• Build number

: displays the software, build number.

Note:

Firmware, baseband, kernel and build numbers are usually used for

updates to the handset or support. For additional information please

contact your T-Mobile service representative.

Changing Your Settings 230

Software Update

The Software Update feature enables you to use your phone to

connect to the network and upload any new phone software

directly to your phone. The phone automatically updates with the

latest available software when you access this option.

䊳

Press ➔ and then tap (

Settings

) ➔

Software update

The phone automatically updates the software (if

available).

231

Section 13: Health and Safety Information

This section outlines the safety precautions associated with using

your phone. The terms “mobile device” or “cell phone” are used

in this section to refer to your phone.

Read this information before

using your mobile device

Exposure to Radio Frequency (RF) Signals

The U.S. Food and Drug Administration (FDA) has published

information for consumers relating to Radio Frequency (RF)

exposure from wireless phones. The FDA publication includes the

following information:

Do cell phones pose a health hazard?

Many people are concerned that cell phone radiation will cause

cancer or other serious health hazards. The weight of scientific

evidence has not linked cell phones with any health problems.

Cell phones emit low levels of Radio Frequency (RF) energy. Over

the past 15 years, scientists have conducted hundreds of studies

looking at the biological effects of the radio frequency energy

emitted by cell phones. While some researchers have reported

biological changes associated with RF energy, these studies have

failed to be replicated. The majority of studies published have

failed to show an association between exposure to radio

frequency from a cell phone and health problems.

The low levels of RF cell phones emit while in use are in the

microwave frequency range. They also emit RF at substantially

reduced time intervals when in the stand-by mode. Whereas high

levels of RF can produce health effects (by heating tissue),

exposure to low level RF that does not produce heating effects

causes no known adverse health effects.

The biological effects of radio frequency energy should not be

confused with the effects from other types of electromagnetic

energy.

Very high levels of electromagnetic energy, such as is found in

X-rays and gamma rays, can ionize biological tissues. Ionization

is a process where electrons are stripped away from their normal

locations in atoms and molecules. It can permanently damage

biological tissues including DNA, the genetic material.

The energy levels associated with radio frequency energy,

including both radio waves and microwaves, are not great

enough to cause ionization of atoms and molecules. Therefore,

RF energy is a type of non-ionizing radiation. Other types of

non-ionizing radiation include visible light, infrared radiation

(heat), and other forms of electromagnetic radiation with

relatively low frequencies.

Health and Safety Information 232

While RF energy does not ionize particles, large amounts can

increase body temperatures and cause tissue damage. Two

areas of the body, the eyes and the testes, are particularly

vulnerable to RF heating because there is relatively little blood

flow in them to carry away excess heat.

Research Results to Date: Is there a connection between

RF and certain health problems?

The results of most studies conducted to date say no. In addition,

attempts to replicate and confirm the few studies that have

shown a connection have failed.

The scientific community at large therefore believes that the

weight of scientific evidence does not show an association

between exposure to Radio Frequency (RF) from cell phones and

adverse health outcomes. Still the scientific community has

supported additional research to address gaps in knowledge.

Some of these studies are described below.

Interphone Study

Interphone is a large international study designed to determine

whether cell phones increase the risk of head and neck cancer. A

report published in the International Journal of Epidemiology

(June, 2010) compared cell phone usage for more than 5,000

people with brain tumors (glioma and meningioma) and a similar

number of healthy controls.

Results of this study did NOT show that cell phones caused brain

cancer. In this study, most people had no increased risk of brain

cancer from using cell phones. For people with the heaviest use

of cell phones (an average of more than ½ hour per day, every

day, for over 10 years) the study suggested a slight increase in

brain cancer. However, the authors determined that biases and

errors prevented any conclusions being drawn from this data.

Additional information about Interphone can be found at

http://com.iarc.fr/en/media-centre/pr/.

Interphone is the largest cell phone study to date, but it did not

answer all questions about cell phone safety. Additional research

is being conducted around the world, and the FDA continues to

monitor developments in this field.

International Cohort Study on Mobile Phone Users (COSMOS)

The COSMOS study aims to conduct long-term health monitoring

of a large group of people to determine if there are any health

issues linked to long-term exposure to radio frequency energy

from cell phone use. The COSMOS study will follow

approximately 300,000 adult cell phone users in Europe for 20 to

30 years. Additional information about the COSMOS study can be

found at

http://www.ukcosmos.org/index.html

233

Risk of Brain Cancer from Exposure to Radio Frequency Fields

in Childhood and Adolescence (MOBI-KIDS)

MOBI-KIDS is an international study investigating the relationship

between exposure to radio frequency energy from

communication technologies including cell phones and brain

cancer in young people. This is an international multi-center

study involving 14 European and non-European countries.

Additional information about MOBI-KIDS can be found at

http://www.creal.cat/programes-recerca/en_projectes-creal/

view.php?ID=39.

Surveillance, Epidemiology, and End Results (SEER) Program

of the National Cancer Institute

The National Cancer Institute (NCI) actively follows cancer

statistics in the United States to detect any change in rates of

new cases for brain cancer. If cell phones play a role in risk for

brain cancer, rates should go up, because heavy cell phone use

has been common for quite some time in the U.S. Between 1987

and 2005, the overall age-adjusted incidence of brain cancer did

not increase. Additional information about SEER can be found at

http://seer.cancer.gov/

Cell Phone Industry Actions

Although the existing scientific data do not justify FDA regulatory

actions, the FDA has urged the cell phone industry to take a

number of steps, including the following:

•

Support-needed research on possible biological effects of RF for

the type of signal emitted by cell phones;

•

Design cell phones in a way that minimizes any RF exposure to the

user; and

•

Cooperate in providing users of cell phones with the current

information on cell phone use and human health concerns.

The FDA also is working with voluntary standard-setting bodies

such as the Institute of Electrical and Electronics Engineers

(IEEE), the International Commission on Non-Ionizing Radiation

Protection (ICNIRP), and others to assure that safety standards

continue to adequately protect the public.

Health and Safety Information 234

Reducing Exposure: Hands-Free Kits and Other

Accessories

Steps to Reduce Exposure to Radio Frequency Energy

If there is a risk from being exposed to radio frequency energy

(RF) from cell phones - and at this point we do not know that

there is - it is probably very small. But, if you are concerned

about avoiding even potential risks, you can take a few simple

steps to minimize your RF exposure.

•

Reduce the amount of time spent using your cell phone;

•

Use speaker mode or a headset to place more distance between your

head and the cell phone.

Hands-Free Kits

Hands-free kits may include audio or Bluetooth® headsets and

various types of body-worn accessories such as belt-clips and

holsters. Combinations of these can be used to reduce RF energy

absorption from cell phones.

Headsets can substantially reduce exposure because the phone

is held away from the head in the user's hand or in approved

body-worn accessories. Cell phones marketed in the U.S. are

required to meet RF exposure compliance requirements when

used against the head and against the body.

Because there are no known risks from exposure to RF emissions

from cell phones, there is no reason to believe that hands-free

kits reduce risks. Hands-free kits can be used for convenience

and comfort. They are also required by law in many states if you

want to use your phone while driving.

Cell Phone Accessories that Claim to Shield the Head from

RF Radiation

Because there are no known risks from exposure to RF emissions

from cell phones, there is no reason to believe that accessories

which claim to shield the head from those emissions reduce

risks. Some products that claim to shield the user from RF

absorption use special phone cases, while others involve nothing

more than a metallic accessory attached to the phone. Studies

have shown that these products generally do not work as

advertised. Unlike “hands-free” kits, these so-called “shields”

may interfere with proper operation of the phone. The phone may

be forced to boost its power to compensate, leading to an

increase in RF absorption.

Children and Cell Phones

The scientific evidence does not show a danger to any users of

cell phones from RF exposure, including children and teenagers.

The steps adults can take to reduce RF exposure apply to

children and teenagers as well.

•

Reduce the amount of time spent on the cell phone;

235

•

Use speaker mode or a headset to place more distance between the

head and the cell phone.

Some groups sponsored by other national governments have

advised that children be discouraged from using cell phones at

all. For example, The Stewart Report from the United Kingdom

made such a recommendation in December 2000. In this report,

a group of independent experts noted that no evidence exists that

using a cell phone causes brain tumors or other ill effects. Their

recommendation to limit cell phone use by children was strictly

precautionary; it was not based on scientific evidence that any

health hazard exists.

Additional information on the safety of RF exposures from various

sources can be obtained from the following organizations

(updated 10/1/2010):

•

FCC RF Safety Program:

http://www.fcc.gov/oet/rfsafety/.

•

Environmental Protection Agency (EPA):

http://www.epa.gov/radtown/wireless-tech.html.

•

Occupational Safety and Health Administration (OSHA):

http://www.osha.gov/SLTC/radiofrequencyradiation/.

(Note: This web address is case sensitive.)

•

National Institute for Occupational Safety and Health (NIOSH):

http://www.cdc.gov/niosh/.

•

World Health Organization (WHO):

http://www.who.int/peh-emf/en/.

•

International Commission on Non-Ionizing Radiation Protection:

http://www.icnirp.de.

•

Health Protection Agency:

http://www.hpa.org.uk/Topics/Radiation/.

•

US Food and Drug Administration:

http://www.fda.gov/Radiation-EmittingProducts/

RadiationEmittingProductsandProcedures/

HomeBusinessandEntertainment/CellPhones/default.htm.

Specific Absorption Rate (SAR) Certification

Information

Your wireless phone is a radio transmitter and receiver. It is

designed and manufactured not to exceed the exposure limits for

Radio Frequency (RF) energy set by the Federal Communications

Commission (FCC) of the U.S. Government.

These FCC exposure limits are derived from the

recommendations of two expert organizations: the National

Council on Radiation Protection and Measurement (NCRP) and

the Institute of Electrical and Electronics Engineers (IEEE).

In both cases, the recommendations were developed by scientific

and engineering experts drawn from industry, government, and

academia after extensive reviews of the scientific literature

related to the biological effects of RF energy.

Health and Safety Information 236

The exposure limit set by the FCC for wireless mobile phones

employs a unit of measurement known as the Specific

Absorption Rate (SAR). The SAR is a measure of the rate of

absorption of RF energy by the human body expressed in units of

watts per kilogram (W/kg). The FCC requires wireless phones to

comply with a safety limit of 1.6 watts per kilogram (1.6 W/kg).

The FCC exposure limit incorporates a substantial margin of

safety to give additional protection to the public and to account

for any variations in measurements.

SAR tests are conducted using standard operating positions

accepted by the FCC with the phone transmitting at its highest

certified power level in all tested frequency bands. Although the

SAR is determined at the highest certified power level, the actual

SAR level of the phone while operating can be well below the

maximum value. This is because the phone is designed to

operate at multiple power levels so as to use only the power

required to reach the network. In general, the closer you are to a

wireless base station antenna, the lower the power output.

Before a new model phone is available for sale to the public, it

must be tested and certified to the FCC that it does not exceed

the exposure limit established by the FCC. Tests for each model

phone are performed in positions and locations (e.g. at the ear

and worn on the body) as required by the FCC.

For body-worn operation, this phone has been tested and meets

FCC RF exposure guidelines when used with an accessory that

contains no metal and that positions the mobile device a

minimum of 1.0 cm from the body.

Use of other accessories may not ensure compliance with FCC RF

exposure guidelines.

The FCC has granted an Equipment Authorization for this mobile

phone with all reported SAR levels evaluated as in compliance

with the FCC RF exposure guidelines. The maximum SAR values

for this model phone as reported to the FCC are:

Cellular/PCS WCDMA/GSM/EDGE and AWS WCDMA

•

Head: 0.23 W/Kg.

•

Body-worn Accessory: 0.99 W/Kg.

•

Product Specific: 0.99 W/kg;

•

Simultaneous Transmission: 1.30 W/kg.

WLAN

•

Head: 0.35 W/Kg.

•

Body-worn Accessory: 0.31 W/Kg.

•

Product Specific: 0.10 W/kg;

•

Simultaneous Transmission: 1.30 W/kg

237

SAR information on this and other model phones can be viewed

online at

http://www.fcc.gov/oet/ea

. To find information that

pertains to a particular model phone, this site uses the phone

FCC ID number which is usually printed somewhere on the case

of the phone.

Sometimes it may be necessary to remove the battery pack to

find the number. Once you have the FCC ID number for a

particular phone, follow the instructions on the website and it

should provide values for typical or maximum SAR for a particular

phone. Additional product specific SAR information can also be

obtained at

www.fcc.gov/cgb/sar

Smart Practices While Driving

On the Road - Off the Phone

The primary responsibility of every driver is the safe operation of

his or her vehicle.

Responsible drivers understand that no secondary task should be

performed while driving whether it be eating, drinking, talking to

passengers, or talking on a mobile phone - unless the driver has

assessed the driving conditions and is confident that the

secondary task will not interfere with their primary responsibility.

Do not engage in any activity while driving a moving vehicle which

may cause you to take your eyes off the road or become so

absorbed in the activity that your ability to concentrate on the act

of driving becomes impaired

. Samsung is committed to promoting

responsible driving and giving drivers the tools they need to

understand and address distractions.

Check the laws and regulations on the use of mobile devices and

their accessories in the areas where you drive. Always obey them.

The use of these devices may be prohibited or restricted in certain

areas. For example, only hands-free use may be permitted in

certain areas.

Before answering calls, consider your circumstances. Let the call

go to voicemail when driving conditions require. Remember,

driving comes first, not the call!

If you consider a call necessary and appropriate, follow these

tips:

•

Use a hands-free device;

•

Secure your phone within easy reach;

•

Place calls when you are not moving;

•

Plan calls when your car will be stationary;

•

Do not engage in stressful or emotional conversations;

•

Let the person with whom you are speaking know that you are driving

and will suspend the call if necessary;

•

Do not take notes or look up phone numbers while driving;

Notice regarding legal restrictions on mounting this device in an

automobile:

Health and Safety Information 238

Laws in some states may prohibit mounting this device on or

near the windshield of an automobile. In other states, the law

may permit mounting this device only in specific locations in the

automobile. Be sure to consult the state and local laws or

ordinances where you drive before mounting this device in an

automobile. Failure to comply with these restrictions could result

in fines, penalties, or other damages.

Never mount this device in a manner that will obstruct the

driver's clear view of the street and traffic.

Never use wireless data services such as text messaging, Web

browsing, or e-mail while operating a vehicle.

Never watch videos, such as a movie or clip, or play video games

while operating a vehicle.

For more information

, go to

http://www.ctia.org

Battery Use and Safety

Important!: Handle and store batteries properly to avoid injury or damage

Most battery issues arise from improper handling of batteries

and, particularly, from the continued use of damaged batteries.

•

Do not disassemble, crush, puncture, shred, or otherwise attempt

to change the form of your battery

. Do not put a high degree of

pressure on the battery. This can cause leakage or an internal short-

circuit, resulting in overheating.

•

Do not let the phone or battery come in contact with liquids.

Liquids can get into the phone's circuits, leading to corrosion. Even

when the phone appears to be dry and appears to operate normally,

the circuitry could slowly corrode and pose a safety hazard. If the

phone and/or battery get wet, have them checked by your service

provider or contact Samsung, even if they appear to be working

properly.

•

Do not place your battery in or near a heat source

. Excessive

heating can damage the phone or the battery and could cause the

phone or the battery to explode. Do not dry a wet or damp battery with

an appliance or heat source such as a microwave oven, hair dryer,

iron, or radiator. Avoid leaving your phone in your car in high

temperatures.

•

Do not dispose of the phone or the battery in a fire

. The phone or

the battery may explode when overheated.

•

Do not handle a damaged or leaking battery

. Do not let leaking

battery fluid come in contact with your eyes, skin or clothing. For safe

disposal options, contact your nearest Samsung-authorized service

center.

•

Avoid dropping the cell phone

. Dropping the phone or the battery,

especially on a hard surface, can potentially cause damage to the

phone and battery. If you suspect damage to the phone or battery, take

it to a service center for inspection.

•

Never use any charger or battery that is damaged in any way

239

•

Do not allow the battery to touch metal objects

. Accidental

short-circuiting can occur when a metallic object (coin, key, jewelry,

clip, or pen) causes a direct connection between the + and - terminals

of the battery (metal strips on the battery), for example when you carry

a spare battery in a pocket or bag. Short-circuiting the terminals may

damage the battery or the object causing the short-circuiting.

Important!: Important

: Use only Samsung-approved batteries, and recharge

your battery only with Samsung-approved chargers which are

specifically designed for your phone.

Warning!: Warning: Use of a non-Samsung-approved battery or charger may

present a risk of fire, explosion, leakage, or other hazard

Samsung's warranty does not cover damage to the phone caused

by non-Samsung-approved batteries and/or chargers.

•

Do not use incompatible cell phone batteries and chargers

. Some

websites and second-hand dealers not associated with reputable

manufacturers and carriers, might be selling incompatible or even

counterfeit batteries and chargers. Consumers should purchase

manufacturer or carrier-recommended products and accessories. If

unsure about whether a replacement battery or charger is compatible,

contact the manufacturer of the battery or charger.

•

Misuse or use of incompatible phones, batteries, and charging

devices could result in damage to the equipment and a possible

risk of fire, explosion, or leakage, leading to serious injuries,

damages to your phone, or other serious hazard

Samsung Mobile Products and Recycling

Samsung cares for the environment and encourages its

customers to recycle Samsung mobile devices and genuine

Samsung accessories.

Proper disposal of your mobile device and its battery is not only

important for safety, it benefits the environment. Batteries must

be recycled or disposed of properly.

Recycling programs for your mobile device, batteries, and

accessories may not be available in your area.

We've made it easy for you to recycle your old Samsung mobile

device by working with respected take-back companies in every

state in the country.

Health and Safety Information 240

Drop It Off

You can drop off your Samsung-branded mobile device and

batteries for recycling at one of our numerous Samsung

Recycling Direct (SM) locations. A list of these locations may be

found at:

http://pages.samsung.com/us/recyclingdirect/

usactivities_environment_samsungrecyclingdirect_locations.jsp

Samsung-branded devices and batteries will be accepted at

these locations for no fee.

Consumers may also recycle their used mobile device or

batteries at many retail or carrier-provided locations where

mobile devices and batteries are sold. Additional information

regarding specific locations may be found at:

http://www.epa.gov/epawaste/partnerships/plugin/cellphone/

index.htm

or at

http://www.call2recycle.org/

Mail It In

The Samsung Mobile Take-Back Program will provide Samsung

customers with a free recycling mailing label. Just go to

http://www.samsung.com/us/mobiletakeback

and follow the

instructions to print out a free pre-paid postage label and then

send your old mobile device or battery to the address listed, via

U.S. Mail, for recycling.

Dispose of unwanted electronics through an approved recycler.

To find the nearest recycling location, go to our website:

www.samsung.com/recyclingdirect

Or call, (877) 278-0799.

Follow local regulations regarding disposal of mobile devices

and batteries

Dispose of your mobile device and batteries in accordance with

local regulations. In some areas, the disposal of these items in

household or business trash may be prohibited. Help us protect

the environment - recycle!

Warning!:

Never dispose of batteries in a fire because they may explode.

UL Certified Travel Charger

The Travel Charger for this phone has met applicable UL safety

requirements. Please adhere to the following safety instructions

per UL guidelines:

FAILURE TO FOLLOW THE INSTRUCTIONS OUTLINED MAY

LEAD TO SERIOUS PERSONAL INJURY AND POSSIBLE

PROPERTY DAMAGE.

241

IMPORTANT SAFETY INSTRUCTIONS - SAVE THESE

INSTRUCTIONS.

DANGER - TO REDUCE THE RISK OF FIRE OR ELECTRIC

SHOCK, CAREFULLY FOLLOW THESE INSTRUCTIONS.

FOR CONNECTION TO A SUPPLY NOT IN NORTH

AMERICA, USE AN ATTACHMENT PLUG ADAPTOR OF

THE PROPER CONFIGURATION FOR THE POWER

OUTLET.

THIS POWER UNIT IS INTENDED TO BE CORRECTLY

ORIENTED IN A VERTICAL OR HORIZONTAL OR FLOOR

MOUNT POSITION.

Display / Touch-Screen

Please note the following information when using your mobile

device:

WARNING REGARDING DISPLAY

The display on your mobile device is made of glass or

acrylic and could break if your mobile device is dropped or

if it receives significant impact. Do not use if screen is

broken or cracked as this could cause injury to you.

WARRANTY DISCLAIMER: PROPER USE OF A TOUCH-SCREEN

MOBILE DEVICE

If your mobile device has a touch-screen display, please

note that a touch-screen responds best to a light touch

from the pad of your finger or a non-metallic stylus. Using

excessive force or a metallic object when pressing on the

touch-screen may damage the tempered glass surface

and void the warranty. For more information, please refer

to the “Standard Limited Warranty” on page 252.

GPS & AGPS

Certain Samsung mobile devices can use a Global Positioning

System (GPS) signal for location-based applications. A GPS uses

satellites controlled by the U.S. Government that are subject to

changes implemented in accordance with the Department of

Defense policy and the 2008 Federal Radio navigation Plan (FRP).

Changes may affect the performance of location-based

technology on your mobile device.

Health and Safety Information 242

Certain Samsung mobile devices can also use an Assisted Global

Positioning System (AGPS), which obtains information from the

cellular network to improve GPS performance. AGPS uses your

wireless service provider's network and therefore airtime, data

charges, and/or additional charges may apply in accordance with

your service plan. Contact your wireless service provider for

details.

Your Location

Location-based information includes information that can be

used to determine the approximate location of a mobile device.

Mobile devices which are connected to a wireless network

transmit location-based information. Additionally, if you use

applications that require location-based information (e.g. driving

directions), such applications transmit location-based

information. The location-based information may be shared with

third-parties, including your wireless service provider,

applications providers, Samsung, and other third-parties

providing services.

Use of AGPS in Emergency Calls

When you make an emergency call, the cellular network may

activate AGPS technology in your mobile device to tell the

emergency responders your approximate location.

AGPS has limitations and

might not work in your area

. Therefore:

•

Always tell the emergency responder your location to the best of your

ability; and

•

Remain on the mobile device for as long as the emergency responder

instructs you.

Navigation

Maps, directions, and other navigation data may contain

inaccurate or incomplete data, and circumstances can and do

change over time. In some areas, complete information may not

be available. Therefore,

you should always visually confirm that

the navigational instructions are consistent with what you see

before following them. All users should pay attention to road

conditions, closures, traffic, and all other factors that may impact

safe driving or walking. Always obey posted road signs

243

Emergency Calls

This mobile device, like any wireless mobile device, operates

using radio signals, wireless and landline networks, as well as

user-programmed functions, which cannot guarantee connection

in all conditions, areas, or circumstances. Therefore, you should

never rely solely on any wireless mobile device for essential

communications (medical emergencies, for example). Before

traveling in remote or underdeveloped areas, plan an alternate

method of contacting emergency services personnel. Remember,

to make or receive any calls, the mobile device must be switched

on and in a service area with adequate signal strength.

Emergency calls may not be possible on all wireless mobile

device networks or when certain network services and/or mobile

device features are in use. Check with local service providers.

To make an emergency call:

1. If the phone is not on, switch it on.

2. From the Home screen, tap . Enter the emergency

number for your present location (for example, 911 or

other official emergency number), then tap .

Emergency numbers vary by location.

If certain features are in use (call blocking, for example), you may

first need to deactivate those features before you can make an

emergency call. Consult your User Manual and your local cellular

service provider. When making an emergency call, remember to

give all the necessary information as accurately as possible.

Remember that your mobile device may be the only means of

communication at the scene of an accident; do not cut off the call

until given permission to do so.

Care and Maintenance

Your mobile device is a product of superior design and

craftsmanship and should be treated with care. The suggestions

below will help you fulfill any warranty obligations and allow you

to enjoy this product for many years:

Keep your Samsung Mobile Device away from:

Liquids of any kind

Keep the mobile device dry. Precipitation, humidity, and liquids

contain minerals that will corrode electronic circuits. If the

mobile device does get wet, do not accelerate drying with the

use of an oven, microwave, or dryer, because this may damage

the mobile device and could cause a fire or explosion. Do not

use the mobile device with a wet hand. Doing so may cause an

electric shock to you or damage to the mobile device.

Health and Safety Information 244

Extreme heat or cold

Avoid temperatures below 0°C / 32°F or above 45°C / 113°F.

Microwaves

Do not try to dry your mobile device in a microwave oven.

Doing so may cause a fire or explosion.

Dust and dirt

Do not expose your mobile device to dust, dirt, or sand.

Cleaning solutions

Do not use harsh chemicals, cleaning solvents, or strong

detergents to clean the mobile device. Wipe it with a soft cloth

slightly dampened in a mild soap-and-water solution.

Shock or vibration

Do not drop, knock, or shake the mobile device. Rough

handling can break internal circuit boards.

Paint

Do not paint the mobile device. Paint can clog the device’s

moving parts or ventilation openings and prevent proper

operation.

Responsible Listening

Caution!: Avoid potential hearing loss

Damage to hearing occurs when a person is exposed to loud

sounds over time. The risk of hearing loss increases as sound is

played louder and for longer durations. Prolonged exposure to

loud sounds (including music) is the most common cause of

preventable hearing loss. Some scientific research suggests that

using portable audio devices, such as portable music players and

cell phones, at high volume settings for long durations may lead

to permanent noise-induced hearing loss. This includes the use

of headphones (including headsets, earbuds, and Bluetooth® or

other wireless devices). Exposure to very loud sound has also

been associated in some studies with tinnitus (a ringing in the

ear), hypersensitivity to sound, and distorted hearing. Individual

susceptibility to noise-induced hearing loss and potential hearing

problem varies. Additionally, the amount of sound produced by a

portable audio device varies depending on the nature of the

sound, the device settings, and the headphones that are used. As

a result, there is no single volume setting that is appropriate for

everyone or for every combination of sound, settings, and

equipment.

245

You should follow some common sense recommendations when

using any portable audio device:

•

Always turn the volume down before plugging the earphones into an

audio source.

•

Set the volume in a quiet environment and select the lowest volume at

which you can hear adequately.

•

Be aware that you can adapt to higher volume settings over time, not

realizing that the higher volume may be harmful to your hearing.

•

When using headphones, turn the volume down if you cannot hear the

people speaking near you or if the person sitting next to you can hear

what you are listening to.

•

Do not turn the volume up to block out noisy surroundings. If you

choose to listen to your portable device in a noisy environment, use

noise-cancelling headphones to block out background environmental

noise. By blocking background environment noise, noise cancelling

headphones should allow you to hear the music at lower volumes than

when using earbuds.

•

Limit the amount of time you listen. As the volume increases, less time

is required before you hearing could be affected.

•

Avoid using headphones after exposure to extremely loud noises, such

as rock concerts, that might cause temporary hearing loss. Temporary

hearing loss might cause unsafe volumes to sound normal.

•

Do not listen at any volume that causes you discomfort. If you

experience ringing in your ears, hear muffled speech, or experience

any temporary hearing difficulty after listening to your portable audio

device, discontinue use and consult your doctor.

You can obtain additional information on this subject from the

following sources:

American Academy of Audiology

11730 Plaza American Drive, Suite 300

Reston, VA 20190

Voice: (800) 222-2336

Email: info@audiology.org

Internet:

http://www.audiology.org/Pages/default.aspx

National Institute on Deafness and Other Communication Disorders

National Institutes of Health

31 Center Drive, MSC 2320

Bethesda, MD 20892-2320

Email: nidcdinfo@nih.gov

Internet:

http://www.nidcd.nih.gov/

Health and Safety Information 246

Operating Environment

Remember to follow any special regulations in force in any area,

and always switch your mobile device off whenever it is

forbidden to use it, or when it may cause interference or danger.

When connecting the mobile device or any accessory to another

device, read its user's guide for detailed safety instructions. Do

not connect incompatible products.

Using Your Mobile Device Near Other Electronic Devices

Most modern electronic equipment is shielded from Radio

Frequency (RF) signals. However, certain electronic equipment

may not be shielded against the RF signals from your wireless

mobile device. Consult the manufacturer to discuss alternatives.

Implantable Medical Devices

A minimum separation of six (6) inches should be maintained

between a handheld wireless mobile device and an implantable

medical device, such as a pacemaker or implantable cardioverter

defibrillator, to avoid potential interference with the device.

Persons who have such devices:

•

Should ALWAYS keep the mobile device more than six (6) inches from

their implantable medical device when the mobile device is turned ON;

•

Should not carry the mobile device in a breast pocket;

•

Should use the ear opposite the implantable medical device to

minimize the potential for interference;

•

Should turn the mobile device OFF immediately if there is any reason

to suspect that interference is taking place;

•

Should read and follow the directions from the manufacturer of your

implantable medical device. If you have any questions about using

your wireless mobile device with an implantable medical device,

consult your health care provider.

National Institute for Occupational Safety and Health (NIOSH)

395 E Street, S.W.

Suite 9200

Patriots Plaza Building

Washington, DC 20201

Voice: 1-800-35-NIOSH (1-800-356-4674)

1-800-CDC-INFO (1-800-232-4636)

Outside the U.S. 513-533-8328

Email: cdcinfo@cdc.gov

Internet:

http://www.cdc.gov/niosh/topics/noise/default.html

1-888-232-6348 TTY

247

For more information see:

http://www.fcc.gov/oet/rfsafety/rf-

faqs.html#

Other Medical Devices

If you use any other personal medical devices, consult the

manufacturer of your device to determine if it is adequately

shielded from external RF energy. Your physician may be able to

assist you in obtaining this information. Switch your mobile

device off in health care facilities when any regulations posted in

these areas instruct you to do so. Hospitals or health care

facilities may be using equipment that could be sensitive to

external RF energy.

Vehicles

RF signals may affect improperly installed or inadequately

shielded electronic systems in motor vehicles. Check with the

manufacturer or its representative regarding your vehicle before

using your mobile device in a motor vehicle. You should also

consult the manufacturer of any equipment that has been added

to your vehicle.

Posted Facilities

Switch your mobile device off in any facility where posted notices

require you to do so.

Potentially Explosive Environments

Switch your mobile device off when in any area with a potentially

explosive atmosphere and obey all signs and instructions. Sparks

in such areas could cause an explosion or fire resulting in bodily

injury or even death. Users are advised to switch the mobile

device off while at a refueling point (service station). Users are

reminded of the need to observe restrictions on the use of radio

equipment in fuel depots (fuel storage and distribution areas),

chemical plants, or where blasting operations are in progress.

Areas with a potentially explosive atmosphere are often, but not

always, clearly marked. They include below deck on boats,

chemical transfer or storage facilities, vehicles using liquefied

petroleum gas (such as propane or butane), areas where the air

contains chemicals or particles, such as grain, dust, or metal

powders, and any other area where you would normally be

advised to turn off your vehicle engine.

Health and Safety Information 248

FCC Hearing Aid Compatibility (HAC)

Regulations for Wireless Devices

On July 10, 2003, the U.S. Federal Communications Commission

(FCC) Report and Order in WT Docket 01-309 modified the

exception of wireless mobile devices under the Hearing Aid

Compatibility Act of 1988 (HAC Act) to require digital wireless

mobile devices be compatible with hearing aids.

The intent of the HAC Act is to ensure reasonable access to

telecommunications services for persons with hearing

disabilities. While some wireless mobile devices are used near

some hearing devices (hearing aids and cochlear implants),

users may detect a buzzing, humming, or whining noise. Some

hearing devices are more immune than others to this

interference noise, and mobile devices also vary in the amount of

interference they generate.

The wireless telephone industry has developed a rating system

for wireless mobile devices to assist hearing device users find

mobile devices that may be compatible with their hearing

devices. Not all mobile devices have been rated. Mobile devices

that are rated have the rating on their box or a label located on

the box.

The ratings are not guarantees. Results will vary depending on

the user's hearing device and hearing loss. If your hearing device

happens to be vulnerable to interference, you may not be able to

use a rated mobile device successfully. Trying out the mobile

device with your hearing device is the best way to evaluate it for

your personal needs.

M-Ratings

: Mobile devices rated M3 or M4 meet FCC

requirements and are likely to generate less interference to

hearing devices than mobile devices that are not labeled. M4 is

the better/higher of the two ratings.

T-Ratings

: Mobile devices rated T3 or T4 meet FCC requirements

and are likely to generate less interference to hearing devices

than mobile devices that are not labeled. T4 is the better/higher

of the two ratings.

Hearing devices may also be rated. Your hearing device

manufacturer or hearing health professional may help you find

this rating. Higher ratings mean that the hearing device is

relatively immune to interference noise. The hearing aid and

wireless mobile device rating values are then added together.

A sum of 5 is considered acceptable for normal use. A sum of 6

is considered for best use. If a hearing aid meets the M2 level

rating and the wireless mobile device meets the M3 level rating,

the sum of the two values equal M5. This is synonymous for T

ratings. This should provide the hearing aid user with “normal

usage” while using their hearing aid with the particular wireless

mobile device.

249

“Normal usage” in this context is defined as a signal quality that

is acceptable for normal operation. The M mark is intended to be

synonymous with the U mark. The T mark is intended to be

synonymous with the UT mark. The M and T marks are

recommended by the Alliance for Telecommunications Industries

Solutions (ATIS). The U and UT marks are referenced in Section

20.19 of the FCC Rules.

The HAC rating and measurement procedure are described in the

American National Standards Institute (ANSI) C63.19 standard.

HAC/Wi-Fi for Newer Technologies

This phone has been tested and rated for use with hearing aids

for some of the wireless technologies that it uses. However, there

may be some newer wireless technologies used in this phone

that have not been tested yet for use with hearing aids. It is

important to try the different features of this phone thoroughly

and in different locations, using your hearing aid or cochlear

implant, to determine if you hear any interfering noise. Consult

your service provider or the manufacturer of this phone for

information on hearing aid compatibility. If you have questions

about return or exchange policies, consult your service provider

or phone retailer.

Restricting Children's Access to Your

Mobile Device

Your mobile device is not a toy. Do not allow children to play with

it because they could hurt themselves and others, damage the

mobile device, or make calls that increase your mobile device

bill.

Keep the mobile device and all its parts and accessories out of

the reach of small children.

M3 + M2 = 5 T3 + T2 = 5

Health and Safety Information 250

FCC Notice and Cautions

FCC Notice

The mobile device may cause TV or radio interference if used in

close proximity to receiving equipment. The FCC can require you

to stop using the mobile device if such interference cannot be

eliminated. Vehicles using liquefied petroleum gas (such as

propane or butane) must comply with the National Fire Protection

Standard (NFPA-58). For a copy of this standard, contact the

National Fire Protection Association.

Cautions

Any changes or modifications to your mobile device not expressly

approved in this document could void your warranty for this

equipment and void your authority to operate this equipment.

Only use approved batteries, antennas, and chargers. The use of

any unauthorized accessories may be dangerous and void the

mobile device warranty if said accessories cause damage or a

defect to the mobile device. Although your mobile device is quite

sturdy, it is a complex piece of equipment and can be broken.

Avoid dropping, hitting, bending, or sitting on it.

Other Important Safety Information

•

Only qualified personnel should service the mobile device or install the

mobile device in a vehicle. Faulty installation or service may be

dangerous and may invalidate any warranty applicable to the device.

•

Ensure that any mobile devices or related equipment installed in your

vehicle are securely mounted.

•

Check regularly that all wireless mobile device equipment in your

vehicle is mounted and operating properly.

•

Do not store or carry flammable liquids, gases, or explosive materials

in the same compartment as the mobile device, its parts, or

accessories.

•

For vehicles equipped with an air bag, remember that an air bag

inflates with great force. Do not place objects, including installed or

portable wireless equipment near or in the area over the air bag or in

the air bag deployment area. If wireless equipment is improperly

installed and the air bag inflates, serious injury could result.

•

Switch your mobile device off before boarding an aircraft. The use of

wireless mobile devices in aircraft is illegal and may be dangerous to

the aircraft's operation. Check with appropriate authorities before

using any function of a mobile device while on an aircraft.

•

Failure to observe these instructions may lead to the suspension or

denial of cell phone services to the offender, or legal action, or both.

251

•

If the phone, battery, charger or any accessory is not working properly,

take it to your nearest qualified service facility. The personnel there

will assist you, and if necessary, arrange for service.

•

Dispose of phones in accordance with local regulations. In some areas,

the disposal of phones in household or business trash may be

prohibited. For safe disposal options for phones, contact your nearest

Samsung authorized service center.

Warranty Information 252

Section 14: Warranty Information

Standard Limited Warranty

What is Covered and For How Long?

SAMSUNG TELECOMMUNICATIONS AMERICA, LLC ("SAMSUNG")

warrants that SAMSUNG's handsets and accessories

("Products") are free from defects in material and workmanship

under normal use and service for the period commencing upon

the date of purchase by the first consumer purchaser and

continuing for the following specified period of time after that

date:

What is Not Covered?

This Limited Warranty is conditioned upon proper use of the Product.

This Limited Warranty does not cover: (a) defects or damage resulting

from accident, misuse, abnormal use, abnormal conditions, improper

storage, exposure to liquid, moisture, dampness, sand or dirt, neglect, or

unusual physical, electrical or electromechanical stress; (b) scratches,

dents and cosmetic damage, unless caused by SAMSUNG; (c) defects or

damage resulting from excessive force or use of a metallic object when

pressing on a touch screen; (d) equipment that has the serial number or

the enhancement data code removed, defaced, damaged, altered or

made illegible; (e) ordinary wear and tear; (f) defects or damage

resulting from the use of Product in conjunction or connection with

accessories, products, or ancillary/peripheral equipment not furnished or

approved by SAMSUNG; (g) defects or damage resulting from improper

testing, operation, maintenance, installation, service, or adjustment not

furnished or approved by SAMSUNG; (h) defects or damage resulting

from external causes such as collision with an object, fire, flooding, dirt,

windstorm, lightning, earthquake, exposure to weather conditions, theft,

blown fuse, or improper use of any electrical source; (i) defects or

damage resulting from cellular signal reception or transmission, or

viruses or other software problems introduced into the Product; or (j)

Product used or purchased outside the United States. This Limited

Warranty covers batteries only if battery capacity falls below 80% of

rated capacity or the battery leaks, and this Limited Warranty does not

cover any battery if (i) the battery has been charged by a battery charger

not specified or approved by SAMSUNG for charging the battery; (ii) any

of the seals on the battery are broken or show evidence of tampering; or

(iii) the battery has been used in equipment other than the SAMSUNG

phone for which it is specified.

Phone 1 Year

Batteries 1 Year

Case/Pouch/Holster 90 Days

Other Phone Accessories 1 Year

253

What are SAMSUNG's Obligations?

During the applicable warranty period, provided the Product is

returned in accordance with the terms of this Limited Warranty,

SAMSUNG will repair or replace the Product, at SAMSUNG'S sole

option, without charge. SAMSUNG may, at SAMSUNG's sole

option, use rebuilt, reconditioned, or new parts or components

when repairing any Product, or may replace the Product with a

rebuilt, reconditioned or new Product. Repaired/replaced cases,

pouches and holsters will be warranted for a period of ninety (90)

days. All other repaired/replaced Products will be warranted for

a period equal to the remainder of the original Limited Warranty

on the original Product or for ninety (90) days, whichever is

longer. All replaced Products, parts, components, boards and

equipment shall become the property of SAMSUNG. Except to

any extent expressly allowed by applicable law, transfer or

assignment of this Limited Warranty is prohibited.

What must you do to obtain warranty service?

To obtain service under this Limited Warranty, you must return

the Product to an authorized phone service facility in an adequate

container for shipping, accompanied by the sales receipt or

comparable proof of sale showing the original date of purchase,

the serial number of the Product and the seller's name and

address. To obtain assistance on where to deliver the Product,

please call SAMSUNG Customer Care at 1-888-987-4357. If

SAMSUNG determines that any Product is not covered by this

Limited Warranty, you must pay all parts, shipping, and labor

charges for the repair or return of such Product.

You should keep a separate backup copy of any contents of the

Product before delivering the Product to SAMSUNG for warranty

service.

What Are The Limits On SAMSUNG’s liability?

THIS LIMITED WARRANTY SETS OUT THE FULL EXTENT OF SAMSUNG'S

RESPONSIBILITIES, AND THE EXCLUSIVE REMEDY REGARDING THE

PRODUCTS. ALL IMPLIED WARRANTIES, INCLUDING WITHOUT

LIMITATION, IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS

FOR A PARTICULAR PURPOSE, ARE LIMITED TO THE DURATION OF THIS

LIMITED WARRANTY. IN NO EVENT SHALL SAMSUNG BE LIABLE FOR

DAMAGES IN EXCESS OF THE PURCHASE PRICE OF THE PRODUCT OR

FOR, WITHOUT LIMITATION, COMMERCIAL LOSS OF ANY SORT; LOSS OF

USE, TIME, DATA, REPUTATION, OPPORTUNITY, GOODWILL, PROFITS OR

SAVINGS; INCONVENIENCE; INCIDENTAL, SPECIAL, CONSEQUENTIAL OR

PUNITIVE DAMAGES; OR DAMAGES ARISING FROM THE USE OR

INABILITY TO USE THE PRODUCT. SOME STATES AND JURISDICTIONS

DO NOT ALLOW LIMITATIONS ON HOW LONG AN IMPLIED WARRANTY

LASTS, OR THE DISCLAIMER OR LIMITATION OF INCIDENTAL OR

CONSEQUENTIAL DAMAGES, SO THE ABOVE LIMITATIONS AND

DISCLAIMERS MAY NOT APPLY TO YOU.

Warranty Information 254

SAMSUNG MAKES NO WARRANTIES OR REPRESENTATIONS, EXPRESS

OR IMPLIED, STATUTORY OR OTHERWISE, AS TO THE QUALITY,

CAPABILITIES, OPERATIONS, PERFORMANCE OR SUITABILITY OF ANY

THIRD-PARTY SOFTWARE OR EQUIPMENT USED IN CONJUNCTION WITH

THE PRODUCT, OR THE ABILITY TO INTEGRATE ANY SUCH SOFTWARE OR

EQUIPMENT WITH THE PRODUCT, WHETHER SUCH THIRD-PARTY

SOFTWARE OR EQUIPMENT IS INCLUDED WITH THE PRODUCT

DISTRIBUTED BY SAMSUNG OR OTHERWISE. RESPONSIBILITY FOR THE

QUALITY, CAPABILITIES, OPERATIONS, PERFORMANCE AND SUITABILITY

OF ANY SUCH THIRD-PARTY SOFTWARE OR EQUIPMENT RESTS SOLELY

WITH THE USER AND THE DIRECT VENDOR, OWNER OR SUPPLIER OF

SUCH THIRD-PARTY SOFTWARE OR EQUIPMENT.

Nothing in the Product instructions or information shall be construed to

create an express warranty of any kind with respect to the Products. No

agent, employee, dealer, representative or reseller is authorized to

modify or extend this Limited Warranty or to make binding

representations or claims, whether in advertising, presentations or

otherwise, on behalf of SAMSUNG regarding the Products or this Limited

Warranty.

This Limited Warranty gives you specific legal rights, and you may also

have other rights that vary from state to state.

What is the procedure for resolving disputes?

ALL DISPUTES WITH SAMSUNG ARISING IN ANY WAY FROM THIS

LIMITED WARRANTY OR THE SALE, CONDITION OR

PERFORMANCE OF THE PRODUCTS SHALL BE RESOLVED

EXCLUSIVELY THROUGH FINAL AND BINDING ARBITRATION, AND

NOT BY A COURT OR JURY. Any such dispute shall not be

combined or consolidated with a dispute involving any other

person's or entity's Product or claim, and specifically, without

limitation of the foregoing, shall not under any circumstances

proceed as part of a class action. The arbitration shall be

conducted before a single arbitrator, whose award may not

exceed, in form or amount, the relief allowed by the applicable

law. The arbitration shall be conducted according to the

American Arbitration Association (AAA) Commercial Arbitration

Rules applicable to consumer disputes. This arbitration provision

is entered pursuant to the Federal Arbitration Act. The laws of

the State of Texas, without reference to its choice of laws

principles, shall govern the interpretation of the Limited Warranty

and all disputes that are subject to this arbitration provision. The

arbitrator shall decide all issues of interpretation and application

of this arbitration provision and the Limited Warranty.

For any arbitration in which your total damage claims, exclusive

of attorney fees and expert witness fees, are $5,000.00 or less

("Small Claim"), the arbitrator may, if you prevail, award your

reasonable attorney fees, expert witness fees and costs as part

255

of any award, but may not grant SAMSUNG its attorney fees,

expert witness fees or costs unless it is determined that the claim

was brought in bad faith. In a Small Claim case, you shall be

required to pay no more than half of the total administrative,

facility and arbitrator fees, or $50.00 of such fees, whichever is

less, and SAMSUNG shall pay the remainder of such fees.

Administrative, facility and arbitrator fees for arbitrations in

which your total damage claims, exclusive of attorney fees and

expert witness fees, exceed $5,000.00 ("Large Claim") shall be

determined according to AAA rules. In a Large Claim case, the

arbitrator may grant to the prevailing party, or apportion among

the parties, reasonable attorney fees, expert witness fees and

costs. Judgment may be entered on the arbitrator's award in any

court of competent jurisdiction.

This arbitration provision also applies to claims against

SAMSUNG'S employees, representatives and affiliates if any

such claim arises from the Product's sale, condition or

performance.

You may opt out of this dispute resolution procedure by providing

notice to SAMSUNG no later than 30 calendar days from the date of

the first consumer purchaser's purchase of the Product. To opt out,

you must send notice by e-mail to optout@sta.samsung.com, with

the subject line: "Arbitration Opt Out." You must include in the opt

out e-mail (a) your name and address; (b) the date on which the

Product was purchased; (c) the Product model name or model

number; and (d) the IMEI or MEID or Serial Number, as applicable, if

you have it (the IMEI or MEID or Serial Number can be found (i) on

the Product box; (ii) on the Product information screen, which can

be found under "Settings;" (iii) on a label on the back of the

Product beneath the battery, if the battery is removable; and (iv) on

the outside of the Product if the battery is not removable).

Alternatively, you may opt out by calling 1-888-987-4357 no later

than 30 calendar days from the date of the first consumer

purchaser's purchase of the Product and providing the same

information. These are the only two forms of notice that will be

effective to opt out of this dispute resolution procedure. Opting out

of this dispute resolution procedure will not affect the coverage of

the Limited Warranty in any way, and you will continue to enjoy the

benefits of the Limited Warranty.

Severability

If any portion of this Limited Warranty is held to be illegal or

unenforceable, such partial illegality or unenforceability shall not

affect the enforceability of the remainder of the Limited Warranty.

Samsung Telecommunications America, LLC

1301 E. Lookout Drive

Richardson, Texas 75082

Phone: 1-800-SAMSUNG

Phone: 1-888-987-HELP (4357)

Warranty Information 256

No reproduction in whole or in part allowed without prior written

approval. Specifications and availability subject to change without

notice. [060111]

End User License Agreement for Software

IMPORTANT. READ CAREFULLY: This End User License Agreement

("EULA") is a legal agreement between you (either an individual

or a single entity) and Samsung Electronics Co., Ltd. for software

owned by Samsung Electronics Co., Ltd. and its affiliated

companies and its third party suppliers and licensors that

accompanies this EULA, which includes computer software and

may include associated media, printed materials, "online" or

electronic documentation ("Software"). BY CLICKING THE "I

ACCEPT" BUTTON (OR IF YOU BYPASS OR OTHERWISE DISABLE

THE "I ACCEPT", AND STILL INSTALL, COPY, DOWNLOAD,

ACCESS OR OTHERWISE USE THE SOFTWARE), YOU AGREE TO

BE BOUND BY THE TERMS OF THIS EULA. IF YOU DO NOT

ACCEPT THE TERMS IN THIS EULA, YOU MUST CLICK THE

"DECLINE" BUTTON, AND DISCONTINUE USE OF THE SOFTWARE.

1. GRANT OF LICENSE. Samsung grants you the following rights

provided that you comply with all terms and conditions of this

EULA: You may install, use, access, display and run one copy of

the Software on the local hard disk(s) or other permanent storage

media of one computer and use the Software on a single

computer or a mobile device at a time, and you may not make

the Software available over a network where it could be used by

multiple computers at the same time. You may make one copy of

the Software in machine-readable form for backup purposes

only; provided that the backup copy must include all copyright or

other proprietary notices contained on the original.

2. RESERVATION OF RIGHTS AND OWNERSHIP. Samsung reserves

all rights not expressly granted to you in this EULA. The Software

is protected by copyright and other intellectual property laws and

treaties. Samsung or its suppliers own the title, copyright and

other intellectual property rights in the Software. The Software is

licensed, not sold.

3. LIMITATIONS ON END USER RIGHTS. You may not reverse

engineer, decompile, disassemble, or otherwise attempt to

discover the source code or algorithms of, the Software (except

and only to the extent that such activity is expressly permitted by

applicable law notwithstanding this limitation), or modify, or

disable any features of, the Software, or create derivative works

based on the Software. You may not rent, lease, lend, sublicense

or provide commercial hosting services with the Software.

4. CONSENT TO USE OF DATA. You agree that Samsung and its

affiliates may collect and use technical information gathered as

part of the product support services related to the Software

provided to you, if any, related to the Software. Samsung may

use this information solely to improve its products or to provide

257

customized services or technologies to you and will not disclose

this information in a form that personally identifies you.

5. UPGRADES. This EULA applies to updates, supplements and

add-on components (if any) of the Software that Samsung may

provide to you or make available to you after the date you obtain

your initial copy of the Software, unless we provide other terms

along with such upgrade. To use Software identified as an

upgrade, you must first be licensed for the Software identified by

Samsung as eligible for the upgrade. After upgrading, you may

no longer use the Software that formed the basis for your

upgrade eligibility.

6. SOFTWARE TRANSFER. You may not transfer this EULA or the

rights to the Software granted herein to any third party unless it

is in connection with the sale of the mobile device which the

Software accompanied. In such event, the transfer must include

all of the Software (including all component parts, the media and

printed materials, any upgrades, this EULA) and you may not

retain any copies of the Software. The transfer may not be an

indirect transfer, such as a consignment. Prior to the transfer, the

end user receiving the Software must agree to all the EULA

terms.

7. EXPORT RESTRICTIONS. You acknowledge that the Software is

subject to export restrictions of various countries. You agree to

comply with all applicable international and national laws that

apply to the Software, including the U.S. Export Administration

Regulations, as well as end user, end use, and destination

restrictions issued by U.S. and other governments.

8. TERMINATION. This EULA is effective until terminated. Your

rights under this License will terminate automatically without

notice from Samsung if you fail to comply with any of the terms

and conditions of this EULA. Upon termination of this EULA, you

must cease all use of the Software and destroy all copies, full or

partial, of the Software.

9. THIRD-PARTY APPLICATIONS. Certain third-party applications

may be included with, or downloaded to this mobile device.

SAMSUNG makes no representations whatsoever about any of

these applications. Since SAMSUNG has no control over such

applications, Purchaser acknowledges and agrees that

SAMSUNG is not responsible for the availability of such

applications and is not responsible or liable for any content,

advertising, products, services, or other materials on or available

from such applications. Purchaser expressly acknowledges and

agrees that use of third-party applications is at Purchaser's sole

risk and that the entire risk of unsatisfactory quality,

performance, accuracy and effort is with Purchaser. It is up to

Purchaser to take precautions to ensure that whatever Purchaser

selects to use is free of such items as viruses, worms, Trojan

horses, and other items of a destructive nature. References on

this mobile device to any names, marks, products, or services of

Warranty Information 258

any third-parties are provided solely as a convenience to

Purchaser, and do not constitute or imply an endorsement,

sponsorship, or recommendation of, or affiliation with the third-

party or its products and services. Purchaser agrees that

SAMSUNG shall not be responsible or liable, directly or indirectly,

for any damage or loss caused or alleged to caused by, or in

connection with, use of or reliance on any such third-party

content, products, or services available on or through any such

application. Purchaser acknowledges and agrees that your use

of any third-party application is governed by such third-party

application provider's Terms of Use, License Agreement, Privacy

Policy, or other such agreement and that any information or

personal data you provide, whether knowingly or unknowingly, to

such third-party application provider, will be subject to such

third-party application provider's privacy policy, if such a policy

exists. SAMSUNG DISCLAIMS ANY RESPONSIBILITY FOR ANY

DISCLOSURE OF INFORMATION OR ANY OTHER PRACTICES OF

ANY THIRD-PARTY APPLICATION PROVIDER.

10. Disclaimer of Warranty Regarding Third-Party Applications.

SAMSUNG DOES NOT WARRANT OR MAKE ANY

REPRESENTATIONS REGARDING THE AVAILABILITY, USE,

TIMELINESS, SECURITY, VALIDITY, ACCURACY, OR RELIABILITY OF,

OR THE RESULTS OF THE USE OF, OR OTHERWISE RESPECTING,

THE CONTENT OF ANY THIRD-PARTY APPLICATION WHETHER

SUCH THIRD-PARTY APPLICATION IS INCLUDED WITH THE

PRODUCT DISTRIBUTED BY SAMSUNG, IS DOWNLOADED, OR

OTHERWISE OBTAINED. USE OF ANY THIRD-PARTY APPLICATION

IS DONE AT PURCHASER'S OWN DISCRETION AND RISK AND

PURCHASER IS SOLELY RESPONSIBLE FOR ANY DAMAGE TO

YOUR MOBILE DEVICE OR LOSS OF DATA THAT RESULTS FROM

THE DOWNLOADING OR USE OF SUCH THIRD-PARTY

APPLICATIONS. SAMSUNG EXPRESSLY DISCLAIMS ANY

WARRANTY REGARDING WHETHER PURCHASER'S PERSONAL

INFORMATION IS CAPTURED BY ANY THIRD-PARTY APPLICATION

PROVIDER OR THE USE TO WHICH SUCH PERSONAL

INFORMATION MAY BE PUT BY SUCH THIRD-PARTY APPLICATION

PROVIDER. ANY THIRD-PARTY APPLICATIONS PROVIDED WITH

THIS MOBILE DEVICE ARE PROVIDED "AS IS" AND ON AN "AS

AVAILABLE" BASIS, WITHOUT WARRANTIES OF ANY KIND FROM

SAMSUNG, EITHER EXPRESS OR IMPLIED. TO THE FULLEST

EXTENT POSSIBLE PURSUANT TO APPLICABLE LAW, SAMSUNG

DISCLAIMS ALL WARRANTIES EXPRESS, IMPLIED, OR

STATUTORY, INCLUDING, BUT NOT LIMITED TO, IMPLIED

WARRANTIES OF MERCHANTABILITY, SATISFACTORY QUALITY OR

WORKMANLIKE EFFORT, FITNESS FOR A PARTICULAR PURPOSE,

RELIABILITY OR AVAILABILITY, ACCURACY, LACK OF VIRUSES,

QUIET ENJOYMENT, NON-INFRINGEMENT OF THIRD PARTY

RIGHTS OR OTHER VIOLATION OF RIGHTS. SAMSUNG DOES NOT

WARRANT AGAINST INTERFERENE WITH YOUR ENJOYMENT OF

THE THRID-PARTY APPLICATION, THAT THE FUNCTIONS

259

CONTAINED IN THE THIRD-PARTY APPLICATION WILL MEET

PURCHASER'S REQUIREMENTS, THAT THE OPERATION OF THE

THIRD-PARTY APPLICATION WILL BE UNINTERRUPTED OR

ERROR-FREE, OR THAT DEFECTS IN THE THIRD-PARTY

APPLICATION WILL BE CORRECTED. PURCHASER ASSUMES THE

ENTIRE COST OF ALL NECESSARY SERVICING, REPAIR, OR

CORRECTION. SOME JURISDICTIONS DO NOT ALLOW

EXCLUSIONS OR LIMITATIONS ON HOW LONG AN IMPLIED

WARRANTY LASTS, SO THE ABOVE LIMITATIONS OR EXCLUSIONS

MAY NOT APPLY TO YOU. NO ADVICE OR INFORMATION,

WHETHER ORAL OR WRITTEN, OBTAINED BY PURCHASER FROM

SAMSUNG SHALL BE DEEMED TO ALTER THIS DISCLAIMER OF

WARRANTY REGARDING THIRD-PARTY APPLICATIONS, OR TO

CREATE ANY WARRANTY.

11. Limitation of Liability. SAMSUNG WILL NOT BE LIABLE FOR

ANY DAMAGES OF ANY KIND ARISING OUT OF OR RELATING TO

THE USE OR THE INABILITY TO USE ANY THIRD-PARTY

APPLICATION, ITS CONTENT OR FUNCTIONALITY, INCLUDING BUT

NOT LIMITED TO DAMAGES CAUSED BY OR RELATED TO

ERRORS, OMISSIONS, INTERRUPTIONS, DEFECTS, DELAY IN

OPERATION OR TRANSMISSION, COMPUTER VIRUS, FAILURE TO

CONNECT, NETWORK CHARGES, AND ALL OTHER DIRECT,

INDIRECT, SPECIAL, INCIDENTAL, EXEMPLARY, OR

CONSEQUENTIAL DAMAGES EVEN IF SAMSUNG HAS BEEN

ADVISED OF THE POSSIBILITY OF SUCH DAMAGES. SOME

JURISDICTIONS DO NOT ALLOW THE EXCLUSION OR LIMITATION

OF INCIDENTAL OR CONSEQUENTIAL DAMAGES, SO THE ABOVE

LIMITATION OR EXCLUSION MAY NOT APPLY TO YOU.

NOTWITHSTANDING THE FOREGOING, SAMSUNG'S TOTAL

LIABILITY TO PURCHASER FOR ALL LOSSES, DAMAGES, CAUSES

OF ACTION, INCLUDING BUT NOT LIMITED TO THOSE BASED ON

CONTRACT, TORT, OR OTHERWISE, ARISING OUT OF

PURCHASER'S USE OF THIRD-PARTY APPLICATIONS ON THIS

MOBILE DEVICE, OR ANY OTHER PROVISION OF THIS EULA,

SHALL NOT EXCEED THE AMOUNT PURCHASER PAID

SPECIFICALLY FOR ANY SUCH THIRD-PARTY APPLICATION THAT

WAS INCLUDED WITH THIS MOBILE DEVICE. THE FOREGOING

LIMITATIONS, EXCLUSIONS, AND DISCLAIMERS (INCLUDING

SECTIONS 9, 10, AND 11) SHALL APPLY TO THE MAXIMUM

EXTENT PERMITTED BY APPLICABLE LAW, EVEN IF ANY REMEDY

FAILS ITS ESSENTIAL PURPOSE.

12. U.S. GOVERNMENT END USERS. The Software is licensed

only with "restricted rights" and as "commercial items"

consisting of "commercial software" and "commercial software

documentation" with only those rights as are granted to all other

end users pursuant to the terms and conditions herein.

13. APPLICABLE LAW. This EULA is governed by the laws of

TEXAS, without regard to conflicts of laws principles. This EULA

shall not be governed by the UN Convention on Contracts for the

International Sale of Goods, the application of which is expressly

Warranty Information 260

excluded. If a dispute, controversy or difference is not amicably

settled, it shall be finally resolved by arbitration in Seoul, Korea in

accordance with the Arbitration Rules of the Korean Commercial

Arbitration Board. The award of arbitration shall be final and

binding upon the parties.

14. ENTIRE AGREEMENT; SEVERABILITY. This EULA is the entire

agreement between you and Samsung relating to the Software

and supersedes all prior or contemporaneous oral or written

communications, proposals and representations with respect to

the Software or any other subject matter covered by this EULA. If

any provision of this EULA is held to be void, invalid,

unenforceable or illegal, the other provisions shall continue in full

force and effect.

Precautions for Transfer and Disposal

If data stored on this device is deleted or reformatted using the

standard methods, the data only appears to be removed on a

superficial level, and it may be possible for someone to retrieve

and reuse the data by means of special software.

To avoid unintended information leaks and other problems of this

sort, it is recommended that the device be returned to Samsung’s

Customer Care Center for an Extended File System (EFS) Clear

which will eliminate all user memory and return all settings to

default settings. Please contact the

Samsung Customer Care

Center

for details.

Important!:

Please provide warranty information (proof of purchase) to

Samsung’s Customer Care Center in order to provide this service

at no charge. If the warranty has expired on the device, charges

may apply.

Customer Care Center:

1000 Klein Rd.

Plano, TX 75074

Toll Free Tel: 1.888.987.HELP (4357)

Samsung Telecommunications America, LLC:

1301 East Lookout Drive

Richardson, Texas 75082

Phone: 1-800-SAMSUNG (726-7864)

Important!:

If you are using a handset other than a standard numeric keypad,

dial the numbers listed in brackets.

Phone: 1-888-987-HELP (4357)

reserved.

No reproduction in whole or in part allowed without prior written

approval. Specifications and availability subject to change

without notice.

261

Index

Numerics

2G Network

Using 201

3 Sec Pause

Adding 57

3G Network 201

Using 201

411 & More 140

4G 188, 198

4G Network 201

Using 201

Accessing

Recently-used applications 37

Voice mail 17

Accounts 140

Accounts and Sync 140

Adding Contacts 96

Add 3 Sec Pause 60

Add to Favorites 101

Adjusting

Call volume 64

Adobe PDF 163

Alarm

Setting 191

Turning Off 192

Alarm Tone

Set as 137

Alerts on Call 203

AllShare

Configuring Settings 141

Receiving Media 142

Transmitting Media 142

Answer Vibration 203

Answering a call 57

Answering Key 203

Application cache and data

Clearing 153

Application Menus

Navigating through 35

Applications 37

411 & More 37

Accounts and Sync 37

AllShare 37

Android Market 40, 151

Asphalt 37

Blio 38

Bonus Apps 38

Browser 44, 171

Calculator 38, 143

Calendar 38

Camera 38, 145

Clock 39

Contacts 38

Downloads 39

Email 39, 145

Files 39

Gallery 39

Google Books 38

Google Mail 39, 146

Google Maps 40, 149

Google Search 39

IM 40

Kies air 40

Latitude 40

Lookout 40

Media Hub 40

Memo 41, 154

262

Messaging 41

messaging 155

More for Me 41

Music 41

My Device 41

Navigation 41

Netflix 41

News & Weather 42

Photo Editor 42

Places 42

Polaris Office 42

Pro Apps 42

Settings 42

Slacker 42

Social Hub 42

Tags 43

Task 43

Task Manager 43

TeleNav GPS 43, 167

T-Mobile Mall 42

T-Mobile Name ID 43

T-Mobile TV 43

Using the Camcorder 126

Using the Camera 119

Utility 43

Video Chat 43

Video Player 169

Videos 44

Visual Voicemail 44

Voice Command 44

Voice Recorder 44, 170

Voice Search 44, 170

Voice Talk 44

YouTube 44, 171

Zinio Reader 45

Applications and Development 140

Asphalt 6 142

Audio Output Mode 228

Auto Redial 205

Auto Reject

Configuration 58

Auto Reject List 202

Auto Reject Mode 202

Automatic Answering 203

Auto-sync

Enabling 219

Back up

My Data 221

Backup and Restore 221

Battery

Charging 11

Extending Life 13

Installing 10

Low Battery Indicator 12

Removal 10

Saving Power 13

Wall Charger 11

Battery Cover

Removal 7

Replace 8

Battery Life

Extending 13

Battery Usage 218

Battery Use & Safety 238

Bing

Set Search Engine 178

Blacklist 70

Add To 58

Adding 90

Blio 142

Bluetooth 196

About 179

Activation 196

263

Change Name 180

Deleting a Paired Device 181

Device Name 197

Disable 179

Disconnecting a Paired Device 181

Enable 179

Paring Devices 180

Scan for Devices 180

Scanning for other Devices 197

Sending Contact Information 181

Sending Contacts Via 181

Sending Namecard 93

Set Visibility 180

Settings 179

Status indicators 179

Switching to Headset during call 65

Turning on and off 179

Visibility 197

Visible Time-Out 180

Bonus Apps 142

Books 143

Sync Google Books 220

Browser

Adding bookmarks 176

Deleting bookmarks 176

Emptying cookies 177

Entering a URL 174

Navigation 174

Options 174

Search Engine 178

Settings 177

Bubble

Options 105

Calculator

Scientific Functions 143

Calendar 190

Creating an event 190

Manually Sync Events 144

Settings 190

Calibration 209, 210

Call Alert 203

Call Answering/Ending 203

Call Barring 204

Call Forwarding 203

Configuring 203

Call Functions 54

Answering 57

Ending 55

Ending a Call 55

Ending via Status Bar 55

Making a Multi-Party Call 65

Pause Dialing 60

Redialing the last number 61

Wait dialing 61

Call Rejection 58, 202

Call Settings 202

Additional Settings 204

General 202

Call Status Tones 203

Call Volume

Adjusting 64

Call Waiting 67, 204

Caller ID 204

Caller Ringtone

Set as 137

Calls

Making a 54

Multi-party 65

Muting 65

Camcorder 126

Accessing the Video Folder 129

Options 127

Shooting Video 126

264

Camera 119

Camera Options 120

Taking Pictures 119

Care and Maintenance 243

Charging battery 11

Children and Cell Phones 234

Clearing

Application cache and data 153

Configuration

Initial 14

Connections

Accessing the Internet 173

Contact

Copying to microSD Card 94

Copying to SIM Card 94

Creating a New 84

Joining 91

New From Keypad 85

Contact Entry

Options 90

Contact List

Options 89

Contact Menus

Options 90

Contacts

Adding a Number to Existing 88

Adding Your Facebook Friends 96

Additional Options 98

Default Storage Location 98

Deleting 88

Display Options 95

Displaying Contacts by Name 95

Export List to microSD 183, 222

Family Name First 95

Filtering 96

Given Name First 95

Groups 99

Merge with Google 89

Reject List 90

Send Namecard Via 90

Sending 93

Sending All 93

Setting Default Location 89

Settings 98

Contacts List 54

Context Menus 87, 90

Navigation 36

Using 36

Emptying 177

Copying Contact 94

Corporate Email

Account Syncronization 220

Add Account 220

Creating a Playlist 137

Creating and sending

Messages 102

Customizing

Home screens 45

Data Roaming 200

Activate/Deactivate 200

Deleting

Message Thread 106

Multiple messages 106

Single message 106

Deleting a contact 88

Desk Clock

Configuring 193

Disconnect Storage 52

Display

Icons 23

Settings 23

265

Status Bar 23

Display / Touch-Screen 241

Displaying your phone number 54

DivX

Locating VOD Number 132

Overview 132

Registering Your DivX Device 132

Registration Code 229

Do cell phones pose a health hazard?

231

Downloading

New application 152

Downloads 145

Internet Downloads 145

Other Downloads 145

EDGE Network 201

Email 108

Composing 110

Configuring Settings 111

Creating an Internet Account 109

Internet Email 109

Opening 110

Opening Internet Email 110

Refreshing Messages 110

Sending 98

Emergency Calls 243

Making 55

With SIM 56

Without SIM 56

Emoticons 103

Ending

A call 55

Entering Text 72

Using SWYPE 73

Erasing files from

Memory card 53

Event Notifications 208

Exchange Email 111

Account Setup 112

Composing 113

Configuring Settings 114

Deleting Message 114

Opening 113

Refreshing Messages 113

Exposure to RF Signals 231

Facebook

Video Chat 168

Factory Data Reset 222

Prior To 222

Factory data reset 53

Favorites Tab 101

FCC Hearing Aid Compatibility (HAC)

Regulations for Wireless Devices 248

FCC Notice and Cautions 250

Fixed Dialing Numbers 205

Folder

Creating and Managing 49

Deleting 49

Renaming 49

Font

Style 208

Font Size

Caption 171

Friends

Viewing 89

Gallery

Folder Options 124

Image Options 124

Opening 131

266

Getting Started 6

Battery 10

Battery Cover 7

Locking/Unlocking the Device 15

microSD card 9

SIM Card 8

Switching Device On/Off 14

Voice Mail 16

Gmail 115, 146

Composing a message 116

Creating and Additional Account

117

Opening 116

Refreshing 116

Signing In 115

Viewing 116

Google

Account Management Settings 220

Account Syncronization 219

Add Account 219

Adding a Sync Account 219

Create New Account 15

Merge Contacts 89

Retrieving Password 16

Set Search Engine 178

Signing into Your Account 16

Google Books 143

Google mail

Samsung Electronics Co SGHT999 Cellular/ PCS GSM/ WCDMA and AWS WCDMA Phone with WLAN, Bluetooth and RFID User Manual T Mobile SGH T989 Galaxy S II

Samsung Electronics Co Ltd Cellular/ PCS GSM/ WCDMA and AWS WCDMA Phone with WLAN, Bluetooth and RFID T Mobile SGH T989 Galaxy S II

Contents

Users Manual 2

Navigation menu

Namespaces

Views

Navigation