Samsung Electronics Co SPP4251 42-inch PDP TV Monitor User Manual SPP4251 BN68 00566A 01 cover
Samsung Electronics Co Ltd 42-inch PDP TV Monitor SPP4251 BN68 00566A 01 cover
Contents
- 1. Users Manual 1
- 2. Users Manual 2
Users Manual 2
| Download: |  |
| Mirror Download [FCC.gov] | |
| Document ID | 385855 |
| Application ID | YJV9VS7OVrUAt/z7zKhHMA== |
| Document Description | Users Manual 2 |
| Short Term Confidential | No |
| Permanent Confidential | No |
| Supercede | No |
| Document Type | User Manual |
| Display Format | Adobe Acrobat PDF - pdf |
| Filesize | 207.72kB (2596509 bits) |
| Date Submitted | 2004-01-02 00:00:00 |
| Date Available | 2004-01-02 00:00:00 |
| Creation Date | 2003-12-29 11:23:38 |
| Producing Software | Acrobat Distiller 5.0.5 for Macintosh |
| Document Lastmod | 2003-12-29 11:23:54 |
| Document Title | SPP4251(BN68-00566A-01)cover |
| Document Creator | QuarkXPress..: AdobePS 8.7.3 (301) |
| Document Author: | cyj |
Plug & Play Feature When the television is initially powered ON, several basic customer settings proceed automatically and subsequently. The following settings are available. If the television is in Standby mode, press the POWER button on the remote control. Plug & Play Press ENTER to start Plug & Play Select the correct signal source (Air, STD, HRD and IRC), then press the ENTER button. Air/CATV Air STD HRD IRC ➤ The message Plug & Play is displayed. It flickers for a little while, and then the Language menu is automatically displayed. Start Enter Select the appropriate language by pressing the ▲ or ▼ button. Language Move Enter Enter To start the search, press the ENTER button. 6➤ English French Spanish ➤ The message Antenna input check is displayed. Move Exit Skip The search will end automatically. Channels are sorted and stored in an order which reflects their position in the frequency range (with lowest first and highest last). When it has finished, the Clock Set menu is displayed. Skip Auto Program Press ENTER to start channel store. Start Enter ➤ To stop the search before it has finished or return to normal Skip viewing, press the MENU button. Press the ENTER button to confirm your choice. Auto Program Plug & Play Channel store in process. Air Ant. Input Check 30 Stop Enter Press the ENTER button. Enter Skip Press the œ or √ button to move to the Hour, Minute, or am/pm. Set the Hour, Minute, or am/pm by pressing the ▲ or ▼ button. Skip Clock Hour Min am/pm -- -- am Enter 30 When it has finished, the message Enjoy Your Watching is displayed, and then the channel which has been stored will be activated. Skip Enjoy your watching. 31 1 Plug & Play Feature (continued) Memorizing the Channels If you want to reset this feature... Your PDP can memorize and store all of the available channels for both “off-air” (antenna) and cable channels. After the available channels are memorized, use the CH and CH buttons to scan through the channels. This eliminates the need to change channels by entering the channel digits. There are three steps for memorizing channels: selecting a broadcast source, memorizing the channels (automatic) and adding and deleting channels (manual). Press the MENU button. Press the ▲ or ▼ button to select “Setup”, then press the ENTER button. Setup TV Move Press the ▲ or ▼ button to select “Miscellaneous”, then press the ENTER button. : On √ √ √ √ √ √ √ Enter Return Language Time Caption Digital NR V-Chip Miscellaneous PC : English Miscellaneous TV Melody Plug & Play Blue Screen Selecting the Video Signal-source Before your television can begin memorizing the available channels, you must specify the type of signal source that is connected to the PDP (i.e., an antenna or a cable system). Press the MENU button. Press the ▲ or ▼ button to select “Channel”, then press the ENTER button. Air/CATV Auto Program Add/Delete Fine Tune LNA Channel Scan √ √ √ : On : On Channel TV Move Move Press the ▲ or ▼ button to select “Plug & Play”. Press the ENTER button. Enter Return Plug & Play Press the ENTER button to select “Air/CATV”. : Off Enter √ √ √ √ √ √ Return Channel TV Air/CATV Auto Program Add/Delete Fine Tune LNA Channel Scan Press ENTER to start Plug & Play : Air : Air Air STD HRC : On IRC Start Move Enter For further details on how to set, refer to the previous page. Enter Return Exit Press the ▲ or ▼ button to select “Air”, “STD”, “HRC” or “IRC”. • If you are connected to an antenna, leave “Air” displayed. If you connected cable, press the ▲ or ▼ button to the display the type of cable system: “STD”, “HRC” or “IRC”. (If you are not sure which type of cable system you have, contact your cable company). Channel TV Air/CATV Auto Program Add/Delete Fine Tune LNA Channel Scan Move : Air Air STD HRC : On IRC Enter Return Press the MENU button to exit. Note • STD, HRC and IRC identify various types of cable TV systems. Contact your local cable company to identify the type of cable system that exists in your particular area. At this point the signal source has been selected. Proceed to “Storing Channels in Memory” (Next page). 32 33 Storing Channels in Memory (Automatic Method) First, select the correct signal source (Air, STD, HRC and IRC). See steps on previous page. Press the MENU button. Press the ▲ or ▼ button to select “Channel”, then press the ENTER button. Adding and Erasing Channels (Manual Method) Channel TV Air/CATV Auto Program Add/Delete Fine Tune LNA Channel Scan Move Press the ▲ or ▼ button to select “Auto Program”, then press the ENTER button. ➤ Quick way to access the Automatic Channel Setting: Just press the “AUTO PROG.” button on the remote control. : Off Enter Air/CATV Auto Program Add/Delete Fine Tune LNA Channel Scan Use the number buttons to directly select the channel that will be added or erased. Air Ex) Channel “4” Return Channel TV Move The PDP will begin memorizing all of the available channels. After all the available channels are stored, the Auto program menu reappears. Press the ENTER button to stop. √ √ √ √ √ √ : Air √ √ √ √ √ √ : Air : Off Enter Press the ADD/DEL button, then press the ENTER button. Repeatedly pressing this button will alternate between “Add” and “Erase”. Return Add/Delete Auto Program Press ENTER to start channel store. Air Erased Add Start Enter Return Press the MENU button to exit. Move Enter Exit Note • The PDP automatically cycles through all of the available channels and stores them in memory. This takes about one to two minutes. Note • You can view any channel (including an erased channel) by using the number buttons on the remote control. 34 To View Memorized Channel (PIP Mode) Press the MENU button. Press the ▲ or ▼ button to select “Channel”, then press the ENTER button. Changing Channels Air/CATV Auto Program Add/Delete Fine Tune LNA Channel Scan : Air : Off Move Press the ▲ or ▼ button to select “Channel Scan”, then press the ENTER button. Only the memorized channels are chosen. Using the Channel Buttons Channel TV Enter √ √ √ √ √ √ Return or CH button to change channels. When you press the CH or CH button, the PDP changes channels in sequence. You will see all the channels that the PDP has memorized. (The PDP must have memorized at least three channels.) You will not see channels that were either erased or not memorized. Directly Accessing Channels Press the number buttons to go directly to a channel. For example, to select channel 27, press “2” then “7”. The TV will change channels when you press the second number. Channel Scan Air Press the CH When you use the number buttons, you can directly select channels that were either erased or not memorized. To change to single-digit channels (0~9) faster, press “0” before the single digit. (For channel “4” press “0”, then “4”. Return Using the PRE-CH button to select the previous channel Press the PRE-CH button. The TV will switch to the last channel viewed. Press the MENU button to stop. To quickly switch between two channels that are far apart, tune to one channel, then use the number button to select the second channel. Then, use the PRE-CH button to quickly alternate between them. Adjusting the Volume Using the Volume Buttons Press the VOL + or VOL – button to increase or decrease the volume. Using Mute Using the MUTE Buttons At any time, you can temporarily cut off the sound using the MUTE button. Press the MUTE button and the sound cuts off. The word “Mute” will appear in the lower-left corner of the screen. To turn mute off, press the MUTE button again, or simply press the VOL + or VOL – button. Mute 36 37 Setting Up Your Remote Control This PDP's remote control can operate almost any VCR, cable box or DVD. After it has been set up properly, your remote control can operate in four different modes :TV, VCR, Cable or DVD. Pressing the corresponding button on the remote control allows you to switch between these modes, and control whichever piece of equipment you choose. Note : ● ● Remote Control Codes VCR Codes The remote control may not be compatible with all DVD Players, VCRs, Cable boxes. The remote control can operate only on STB made by Samsung. Setting Up the Remote to Operate Your VCR, Cable box or DVD player Turn off your VCR. (or Cable box, DVD player) Press the MODE button. Mode is changed whenever MODE button is pressed. Press the SET button on your TV's remote control. Using the number buttons on your remote control, enter three digits of the VCR (or Cable box, DVD player) code listed on page 38 of this manual for your brand of VCR (or CATV, DVD). Make sure you enter three digits of the code, even if the first digit is a "0". (If more than one code is listed, try the first one.) Press the POWER button on the remote control. Your VCR (or CATV, DVD) should turn on if your remote is set up correctly. If your VCR (or CATV, DVD) does not turn on after setup, repeat steps 2, 3, and 4, but try one of the other codes listed for your brand of VCR (or CATV, DVD). If no other codes are listed, try each code, 000 through 089 (or Cable box: 000 through 077, DVD player: 000 through 008). Cable Box Codes DVD Codes Notes • When your remote control is in “VCR” mode, the VCR control buttons (STOP, REW, PLAY/PAUSE, FF) still operate your VCR. • When your remote control is in “CATV” or “DVD” mode, the VCR control buttons (STOP, REW, PLAY/PAUSE, FF) still operate your VCR. 38 39 Viewing an External Signal Source Use the remote control to switch between viewing signals from connected equipment, such as VCRs, DVD, Set-Top box and the TV source (broadcast or cable). Setting the Signal Source Press the MENU button. Press the ENTER button to select “Input”. Assigning Names to External input mode Input TV Source List Edit Name : TV √ √ Enter Return Press the MENU button. Press the ENTER button to select “Input”. Input TV Source List Edit Name √ √ : TV Edit Name Move Press the ENTER button to select “Source List”. Source List TV TV AV 1 AV 2 AV 3 S-Video 1 S-Video 2 Component 1 †More Move Press the ▲ or ▼ button to select signal source, then press the ENTER button. TV AV 1 AV 2 AV 3 S-Video 1 S-Video 2 Component 1 †More Notes • When you connect equipment to the PDP, you can choose between the following sets of jacks: AV 1, AV 2, S-Video, Component 1, Component 2, Monitor OUT, PC or DVI on the PDP’s rear panel. Press the ENTER button. • Press the ▲ or ▼ button to select external device: VCR, DVD, Cable STB, HD STB, Satellite STB, AV Receiver, DVD Receiver, Game, Camcorder, DVD Combo, DHR or PC. Set other signal sources (AV 2, AV 3, S-Video 1, S-Video 2, Component 1, Component 2, PC or DVI) using the same method as listed above. AV 1 AV 2 AV 3 S-Video 1 S-Video 2 Component 1 Component 2 †More Return √ √ √ √ √ √ √ ---------------------- Edit Name Enter Return Edit Name TV AV 1 AV 2 AV 3 S-Video 1 S-Video 2 Component 1 Component 2 †More Move Return Enter Edit Name TV Move VCR ---------------Enter Press the ▲ or ▼ button to select “Edit Name”, then press the ENTER button. Return Source List TV Move 40 ------------------Enter Move ---- ---- √ - - - - VCR √ ---√ DVD ---√ STB √ - - - Cable - - - -HD STB √ STB √ - - -Satellite † Enter Return Press the MENU button to exit. 41 P Picture Control Customizing the Picture ................................................................44 Using Automatic Picture Settings ....................................................45 Selecting the Color Tone................................................................46 DNIe (Digital Natural Image engine) ............................................47 Changing the Screen Size ............................................................48 Freezing the Picture ......................................................................50 Viewing the Picture-in-Picture..........................................................51 Selecting a Signal Source (Antenna or Cable) for PIP ........................56 1 Customizing the Picture Using Automatic Picture Settings You can use the on-screen menus to change the Contrast, Brightness, Sharpness, Color, and Tint settings of your PDP. Your PDP has automatic picture settings that allow you to adjust the video display easily. Press the MENU button. Press the ▲ or ▼ button to select “Picture”, then press the ENTER button. Picture TV Mode Custom Color Tone Color Control Film Mode Size DNIe PIP Move Press the ▲ or ▼ button to select “Custom”, then press the ENTER button. You will also see the items “Contrast”, “Brightness”, “Sharpness”, “Color” and “Tint”. Press the ▲ or ▼ button to select the item you wish to change, then press the œ or √ button to change the value of the item. : Normal : Off : 16:9 : On Enter Contrast Brightness Sharpness Color Tint G 50 Contrast √ √ √ √ √ √ √ √ 60 35 50 55 R 50 Enter Press the MENU button. Press the ▲ or ▼ button to select “Picture”, then press the ENTER button. Mode Custom Color Tone Color Control Film Mode Size DNIe PIP ➤ Quick way to access the picture setting: Just press the “P.MODE” button on the remote control. Move Press the ENTER button to select “Mode”. Mode Custom Color Tone Color Control Film Mode Size DNIe PIP Move Press the ▲ or ▼ button to select “Standard”, “Music”, “Movie”, “Speech”, or “Custom” picture setting. • You can select “Entertain”, “Internet”, “Text”, or “Custom” in PC/DVI mode. : Off : 16:9 : On Enter Return Dynamic : Custom Standard : Normal Movie Custom : Off : 16:9 : On Enter Return Picture TV Mode Custom Color Tone Color Control Film Mode Size DNIe PIP Move Press the MENU button to exit. √ √ √ √ √ √ √ √ : Custom : Normal Picture TV Return 74 Picture TV Return Custom TV Move : Custom Dynamic : Custom Standard : Normal Movie : Off Custom : 16:9 : On Enter Return Press the MENU button to exit. Note • In the PC/DVI mode, you can’t adjust the Color and Tint. 44 45 Selecting the Color Tone DNIe (Digital Natural Image engine) Samsung’s New Technology brings you more detailed images with contrast, white enhancement and 3D noise reduction. Press the MENU button. Press the ▲ or ▼ button to select “Picture”, then press the ENTER button. Picture TV Mode Custom Color Tone Color Control Film Mode Size DNIe PIP Move Press the ▲ or ▼ button to select “Color Tone”, then press the ENTER button. Press the ▲ or ▼ button to select “Cool2”, “Cool1”, “Normal”, “Warm1” or “Warm2”. • You can select “Custom”, “Cool”, Normal” or “Warm” in PC mode. • You can select “Cool”, “Normal” or “Warm” in DVI mode. Mode Custom Color Tone Color Control Film Mode Size DNIe PIP 46 Press the MENU button to exit. : Off : 16:9 : On Enter Mode Custom Color Tone Color Control Film Mode Size DNIe PIP Press the MENU button. Press the ▲ or ▼ button to select “Picture”, then press the ENTER button. Mode Custom Color Tone Color Control Film Mode Size DNIe PIP ➤ Quick way to select DNIe: Simply press the “DNIe” button under the cover of the remote control. Move : Custom Press the ▲ or ▼ button to select “DNIe”, then press the ENTER button. Mode Custom Color Tone Color Control Film Mode Size DNIe PIP Cool1 : Off Normal : 16:9 : OnWarm1 Warm2 Return Move : Custom : Normal Cool2 • On : Switches on the DNIe mode. • Off : Switches off the DNIe mode. • Demo : The screen before applying DNIe appears on the right and the screen after applying DNIe appears on the left. Cool1 : Off Normal : 16:9 : OnWarm1 Warm2 Enter Press the ▲ or ▼ button to select “On”, “Off” or “Demo”. : Normal : Off : 16:9 : On Enter √ √ √ √ √ √ √ √ Return : Custom : Normal : OffOn : 16:9 : OnOff Demo Enter Return Picture TV Mode Custom Color Tone Color Control Film Mode Size DNIe PIP Move Return : Custom Picture TV : Normal Cool2 Enter Picture TV Return Picture TV Move : Normal √ √ √ √ √ √ √ √ Picture TV Move : Custom : Custom : Normal : OffOn : 16:9 : OnOff Demo Enter Return Press the MENU button to exit. 47 Changing the Screen Size Your selection in the Screen Size depends on the type of TV or monitor you are using your PDP. ➤ Quick way to access the Screen Size menu : Just press the “ASPECT” button on the remote control. Press the MENU button. Press the ▲ or ▼ button to select “Picture”, then press the ENTER button. Mode Custom Color Tone Color Control Film Mode Size DNIe PIP Move Press the ▲ or ▼ button to select “Size”, then press the ENTER button. Press the œ or √ button to select the screen size you want, then press the ENTER button. Mode Custom Color Tone Color Control Film Mode Size DNIe PIP : Normal : Off : 16:9 : On Enter Return • If you watch a still image or the Normal (4:3) mode for a long time (over 2 hours), an image may be burned onto the screen. View the monitor in Wide or Panorama mode as much as possible. 16:9(W ide) 16:9 Aspect Ratio that fits DVD and Wide Screen applications. 16:9 √ √ √ √ √ √ √ √ : Custom : Normal : Off : 16:9 : On Enter Panorama Fits a 16:9 picture onto a 4:3 screen and displays it without clipping the image. Panorama Return Size TV Zoom 16 : 9 Panorama Zoom 4:3 Move √ √ √ √ √ √ √ √ : Custom Picture TV Move Note Picture TV Magnifies the 16:9 wide picture (in a vertical direction) to fit the screen size. Select by pressing the œ or √ button. Use the ▲ or ▼ button to move the picture up and down. After selecting , use the ▲ or ▼ button to magnify or reduce the picture size in a vertical direction. Enter Zoom Return Press the MENU button to exit. 4 : 3(Normal) 3(Normal) Standard TV and VCR screen size having a 4:3 Aspect Ratio. 4:3 Note • If you watch a still image or the 4:3 (Normal) mode for a long time (over 2 hours), an image may be burned onto the screen. View the monitor in 16:9(Wide) or Panorama mode as much as possible. 48 Notes • In TV, VIDEO, S-VIDEO and Component (480i) modes, all screen modes can be selected. (Wide ➞ Panorama ➞ Zoom ➞ Normal). • In PC/DVI mode, only Wide & Normal modes can be selected. • In Component (480p, 720p. 1080i) modes, Panorama mode can’t be selected. • In Component (480p, 720p. 1080i) modes, you can move the picture on screen by pressing the ▲ or ▼ button. (All screen modes) • Changing the screen size to Normal, or Zoom during PIP mode will cause the PIP window to disappear. 49 Freezing the Picture Still Press the STILL button on the remote control to freeze a moving picture. Press again to cancel. Viewing the Picture-in-Picture Selecting the PIP Screen Press the MENU button. Press the ▲ or ▼ button to select “Picture”, then press the ENTER button. Picture TV Mode Custom Color Tone Color Control Film Mode Size DNIe PIP ➤ Quick way to access the PIP mode: Just press the “PIP” button on the remote control. Move Enter Press the ENTER button, then press the ▲ or ▼ button to select “On”. The PIP image will appear in the corner of the screen. • Pressing the ▲ or ▼ button will alternate between “On” and “Off”. Return PIP Move : Off Off : TV On : Air : 4 : Main Enter Return Press the MENU button to exit. O : PIP and Swap Operate X : PIP doesn’t Operate PIP Settings Main screen PIP screen 50 : Air : 4 : Main Enter PIP Source Swap Size Position Air/CATV Channel Sound Select • Check if the V-Chip Lock (refer to page 96) is ON if the PIP On/Off will not function. PIP does not function when the V-Chip Lock is set to On. Change the setting to Off and try it again. √ √ √ √ √ √ √ √ : Off : TV TV Note Return PIP PIP Source Swap Size Position Air/CATV Channel Sound Select Move : Off : 16:9 : On TV Press the ▲ or ▼ button to select “PIP”, then press the ENTER button. √ √ √ √ √ √ √ √ : Custom : Custom TV AV 1 AV 2 AV 3 S-Video 1 S-Video 2 Component 1 Component 2 TV AV 1 AV 2 AV 3 S-Video 1 S-Video 2 Component 1 Component 2 51 Selecting an External Signal Swapping the Contents of the PIP Image and Main Image You can use PIP to view a signal from an external source, such as a VCR. Press the MENU button. Press the ▲ or ▼ button to select “Picture”, then press the ENTER button. Picture TV Mode Custom Color Tone Color Control Film Mode Size DNIe PIP Move Press the ▲ or ▼ button to select “PIP”, then press the ENTER button. PIP Source Swap Size Position Air/CATV Channel Sound Select The signal from these inputs will not appear if you have not connected any equipment to the PDP's respective input jacks. : Off : 16:9 : On Enter PIP Source Swap Size Position Air/CATV Channel Sound Select √ √ √ √ √ √ √ √ : On : TV : Air : 22 : Main Enter PIP Source Swap Size Position Air/CATV Channel Sound Select Move Picture TV Mode Custom Color Tone Color Control Film Mode Size DNIe PIP ➤ Quick way to access swapping: Just press the “SWAP” button under the cover of the remote control. Move Press the ▲ or ▼ button to select “PIP”, then press the ENTER button. : Custom : Normal : Off : 16:9 : On Enter √ √ √ √ √ √ √ √ Return PIP TV PIP Source Swap Size Position Air/CATV Channel Sound Select Move : On : TV : Air : 4 : Main Enter √ √ √ √ √ √ √ √ Return Return : Off TV : TV AV 1 Press the ▲ or ▼ button to select “Swap”, then press the ENTER button. • The image in the PIP window will appear on the main screen, and vice versa. AV 2 AV 3 : AirS-Video 1 : 22 S-Video 2 : Main † Enter PIP TV PIP Source Swap Size Position Air/CATV Channel Sound Select Move : On : TV : Air : 4 : Main Enter √ √ √ √ √ √ √ √ Return Return PIP TV Press the MENU button. Press the ▲ or ▼ button to select “Picture”, then press the ENTER button. Return PIP TV Move Press the ▲ or ▼ button to cycle through all of the available signal sources: “TV”, “AV 1”, “AV 2”, “AV 3”, “S-Video 1”, “S-Video 2”, “Component 1”, “Component 2”, “PC” and “DVI”. : Normal PIP TV Move Press the ▲ or ▼ button to select “Source”, then press the ENTER button. √ √ √ √ √ √ √ √ : Custom : Off … Component 1 : TV Press the MENU button to exit. Component 2 PC DVI : Air : 4 : Main Enter Return Press the MENU button to exit. Note • The PIP function operates in Wide screen. 52 • Using Multi-Screen in the Normal or Zoom screen will change the size of the main screen to Wide screen. 53 Changing the Size of the PIP Window Press the MENU button. Press the ▲ or ▼ button to select “Picture”, then press the ENTER button. Changing the Location of the PIP Image Picture TV Mode Custom Color Tone Color Control Film Mode Size DNIe PIP ➤ Quick way to access PIP size: Just press the “SIZE” button under the cover of the remote control. Move Press the ▲ or ▼ button to select “PIP”, then press the ENTER button. Press the ▲ or ▼ button to select “Size”, then press the ENTER button. PIP Source Swap Size Position Air/CATV Channel Sound Select Press the ▲ or ▼ button to select option you want, then press the ENTER button. PIP Source Swap Size Position Air/CATV Channel Sound Select 54 Enter : On : TV : Air : 4 : Main Enter PIP Source Swap Size Position Air/CATV Channel Sound Select Press the MENU button. Press the ▲ or ▼ button to select “Picture”, then press the ENTER button. √ √ √ √ √ √ √ √ Mode Custom Color Tone Color Control Film Mode Size DNIe PIP Move Press the ▲ or ▼ button to select “PIP”, then press the ENTER button. PIP Source Swap Size Position Air/CATV Channel Sound Select Move Press the ▲ or ▼ button to select “Position”, then press the ENTER button. Enter PIP Source Swap Size Position Air/CATV Channel Sound Select Move Return : On : TV Press the ▲ or ▼ button to select PIP position you want, then press the ENTER button. : Air : 4 : Main Enter : Off : 16:9 : On Enter Return : On : TV : Air : 4 : Main Enter √ √ √ √ √ √ √ √ Return : On : TV : Air : 4 : Main Enter Return PIP TV PIP Source Swap Size Position Air/CATV Channel Sound Select Move Return : Normal √ √ √ √ √ √ √ √ PIP TV : Air : 4 : Main : Custom PIP TV Return : On : TV Picture TV Return PIP TV Move : Off : 16:9 : On PIP TV Move : Normal √ √ √ √ √ √ √ √ PIP TV Move : Custom : On : TV : Air : 4 : Main Enter Return Press the MENU button to exit. Press the MENU button to exit. 55 Selecting a Signal Source (Antenna or Cable) for PIP If the PIP source is TV during PIP ON, you can select the broadcasting source of PIP picture separately from the main picture. Press the MENU button. Press the ▲ or ▼ button to select “Picture”, then press the ENTER button. Changing the PIP Channel Picture TV Mode Custom Color Tone Color Control Film Mode Size DNIe PIP Move : Custom : Normal : Off : 16:9 : On Enter √ √ √ √ √ √ √ √ Press the MENU button. Press the ▲ or ▼ button to select “Picture”, then press the ENTER button. ➤ Quick way to change the PIP channel: Just press the “CH “CH Picture TV Mode Custom Color Tone Color Control Film Mode Size DNIe PIP “ or ” button under the cover of the remote control. Return Move Press the ▲ or ▼ button to select “PIP”, then press the ENTER button. PIP Source Swap Size Position Air/CATV Channel Sound Select : On : TV : Air : 4 : Main Enter √ √ √ √ √ √ √ √ Press the ▲ or ▼ button to select “PIP”, then press the ENTER button. PIP Source Swap Size Position Air/CATV Channel Sound Select Return PIP Source Swap Size Position Air/CATV Channel Sound Select : On : TV Press the ▲ or ▼ button to select “Channel”, then press the ENTER button. PIP Source Swap Size Position Air/CATV Channel Sound Select Air STD : Air : 4 HRC IRC : Main Enter Return PIP Source Swap Size Position Air/CATV Channel Sound Select : On : TV Press the ▲ or ▼ button to change the channel that appears in the PIP window. Enter Return : On : TV : Air ▲ : 4 ▲ : Main Enter Return Air STD : Air : 4 HRC IRC : Main Enter Return PIP TV PIP Source Swap Size Position Air/CATV Channel Sound Select Move 56 : Air : 4 : Main √ √ √ √ √ √ √ √ PIP TV Move : On : TV PIP TV Move Return PIP TV Move If an antenna is connected, the setting is “Air”. If a Cable TV system is providing the signal, press the ▲ or ▼ button until the appropriate type of cable system is selected (“STD”, “HRC” or “IRC”). Enter PIP TV Move : Off : 16:9 : On √ √ √ √ √ √ √ √ PIP TV Move Press the ▲ or ▼ button to select “Air/CATV”, then press the ENTER button. : Custom : Normal : On : TV : Air ▲ : 4 11 ▲ : Main Enter Return Press the MENU button to exit the menu. Press the MENU button to exit. 57 P Sound Control Customizing the Sound ................................................................60 Using Automatic Sound Settings ....................................................61 Choosing a Multi-Channel Sound (MTS)Soundtrack ..........................62 Using the Auto Volume ..................................................................63 Setting the TruSurround XT ............................................................64 Listening to the Sound of the Sub Picture (PC or DVI Mode)................65 Selecting the Internal Mute ............................................................66 Customizing the Sound Press the MENU button. Press the ▲ or ▼ button to select “Sound”, then press the ENTER button. Using Automatic Sound Settings Sound TV Mode Custom MTS Auto Volume SRS TSXT Internal Mute Move Press the ▲ or ▼ button to select “Custom”, then press the ENTER button. √ √ √ √ √ √ : Custom Stereo Off Stereo Off Enter Press the MENU button. Press the ▲ or ▼ button to select “Sound”, then press the ENTER button. Mode Custom MTS Auto Volume SRS TSXT Internal Mute Move Press the ENTER button to select “Mode”. 100 300 1K Select the option (volume, balance, equalizer) to be adjusted by pressing the œ or √ button. Press the ▲ or ▼ button to reach the required setting. Move Mode Custom MTS Auto Volume SRS TSXT Internal Mute Press the MENU button to exit. Stereo Off Stereo Off Enter Return Standard : Custom Music : Stereo Movie : Off Speech : Stereo : OffCustom 3K 10K Return Move Press the ▲ or ▼ button to select “Standard”, “Music”, “Movie”, “Speech” or “Custom” sound setting, then press the ENTER button. Press the MENU button to exit. Enter Return Sound TV Mode Custom MTS Auto Volume SRS TSXT Internal Mute Move √ √ √ √ √ √ : Custom Sound TV Adjust Sound TV Return Custom TV Standard : Custom Music : Stereo Movie : Off Speech : Stereo : OffCustom Enter Return ➤ If you make any changes to the equalizer settings, the sound Mode is automatically switched to the custom. 60 61 Choosing a Multi-Channel Sound (MTS) Soundtrack Using the Auto Volume Each broadcasting station has its own signal conditions, which can make it necessary to adjust the volume every time the channel is changed. “Auto volume” lets you automatically adjust the volume of the desired channel by lowering the sound output when the modulation signal is high or by raising the sound output when the modulation signal is low. Depending on the particular program being broadcast, you can listen to stereo, mono, or a Separate Audio Program. (SAP audio is usually a foreign-language translation. Sometimes SAP has unrelated information like news or weather.) Press the MENU button. Press the ▲ or ▼ button to select “Sound”, then press the ENTER button. Sound TV Mode Custom MTS Auto Volume SRS TSXT Internal Mute ➤ Quick way to access the MTS menu: Just press the “MTS” button on the remote control. Move Press the ▲ or ▼ button to select “MTS”, then press the ENTER button. Press the ▲ or ▼ button to select “Mono”, “Stereo” or “SAP”, then press the ENTER button. Stereo Off Stereo Off Enter Mode Custom MTS Auto Volume SRS TSXT Internal Mute Enter Mode Custom MTS Auto Volume SRS TSXT Internal Mute Move Mode Custom MTS Auto Volume SRS TSXT Internal Mute Press the ▲ or ▼ button to select “Auto Volume”, then press the ENTER button. Mode Custom MTS Auto Volume SRS TSXT Internal Mute Move Mono Stereo Off Stereo Stereo SAP Off Enter Press the ▲ or ▼ button to select “On”, then press the ENTER button. • Pressing the ▲ or ▼ button will alternate between “On” and “Off”. Return Press the MENU button to exit. • Choose Stereo for channels that are broadcasting in stereo. • Choose Mono for channels that are broadcasting in mono, or if you are having difficulty receiving a stereo signal. • Choose SAP to listen to the Separate Audio Program, which is usually a foreign-language translation. Stereo Off Stereo Off Enter √ √ √ √ √ √ Return : Custom Stereo Off Off Stereo On Off Enter Return Sound TV Mode Custom MTS Auto Volume SRS TSXT Internal Mute Move : Custom Sound TV Return : Custom Sound TV Mono Stereo Off Stereo Stereo SAP Off Sound TV Press the MENU button. Press the ▲ or ▼ button to select “Sound”, then press the ENTER button. Move : Custom Return Sound TV Move √ √ √ √ √ √ : Custom : Custom Stereo Off Off Stereo On Off Enter Return Press the MENU button to exit. Note • The MTS function operates in TV mode only. 62 63 Setting the TruSurround XT Listening to the Sound of the Sub Picture (PC or DVI Mode) TruSurround XT is a patented SRS technology that solves the problem of playing 5.1 multichannel content over two speakers. Tursurround delivers a compelling, virtual surround sound experience through any two-speaker playback system, including internal television speakers. It is fully compatible with all multichannel formats. ➤ Preset to the PC or DVI mode by using the SOURCE button. During the PIP feature is activating, you can listen to the sound of the sub picture. Press the MENU button. Press the ▲ or ▼ button to select “Sound”, then press the ENTER button. Sound TV Mode Custom MTS Auto Volume SRS TSXT Internal Mute ➤ Quick way to access the TruSurround XT menu: Just press the “SRS TSXT” button on the remote control. Move Press the ▲ or ▼ button to select “SRS TSXT”, then press the ENTER button. Press the ▲ or ▼ button to change the setting (Off, 3D Mono or Stereo), then press the ENTER button. Mode Custom MTS Auto Volume SRS TSXT Internal Mute 4➤ TruSurround XT, SRS and ( ) Symbol are trademarks of SRS Labs, Inc. TruSurround XT technology is incorporated under license from SRS Labs, Inc. Stereo Off Stereo Off Enter Mode Custom MTS Auto Volume SRS TSXT Internal Mute Mode Custom Color Tone Color Control Film Mode Size DNIe PIP Press the ▲ or ▼ button to select “PIP”, then press the ENTER button. PIP Source Swap Size Position Air/CATV Channel Sound Select Move PIP Source Swap Size Position Air/CATV Channel Sound Select Move Return Enter Return : On : TV : Air : 4 : Main Enter √ √ √ √ √ √ √ √ Return : On : TV : Air : 4 Main : MainSub Enter Return Set to Sub by pressing the ▲ or ▼ button. PIP TV • You can listen to the sound of the sub picture. ➤ To listen the sound of current main picture, set to Main. PIP Source Swap Size Position Air/CATV Channel Sound Select Move 64 : Off : 16:9 : On √ √ √ √ √ √ √ √ PIP TV • Pressing the ▲ or ▼ button will alternate between “Main” and “Sub”. Stereo Off Stereo Off OffMono 3D Stereo Enter Press the ▲ or ▼ button to select “Sound Select”, then press the ENTER button. : Custom : Normal PIP TV Return : Custom Picture TV Stereo Off Stereo Off OffMono 3D Stereo Enter Press the MENU button. Press the ▲ or ▼ button to select “Picture”, then press the ENTER button. Move : Custom Return Sound TV Move Press the MENU button to exit. √ √ √ √ √ √ Sound TV Move : Custom : On : TV Off On : Air Main : 4 : MainSub Enter Return 65 Selecting the Internal Mute Since the speakers are built in the PDP, you can hear the sound without connecting separate speakers. If you want to hear the sound through separate speakers, cancel the internal amplifier. Press the MENU button. Press the ▲ or ▼ button to select “Sound”, then press the ENTER button. Sound TV Mode Custom MTS Auto Volume SRS TSXT Internal Mute Move Press the ▲ or ▼ button to select “Internal Mute”, then press the ENTER button. Press the ▲ or ▼ button to select “On”, then press the ENTER button. • Pressing the ▲ or ▼ button will alternate between “On” and “Off”. Mode Custom MTS Auto Volume SRS TSXT Internal Mute Press the MENU button to exit. Enter √ √ √ √ √ √ Return : Custom Stereo Off Stereo Off Off On Enter Return Sound TV Mode Custom MTS Auto Volume SRS TSXT Internal Mute Move Stereo Off Stereo Off Sound TV Move : Custom : Custom Stereo Off Stereo Off Off On Enter Return Channel Control Fine Tuning Channels....................................................................68 LNA (Low Noise Amplifier) ............................................................69 66 1 Fine Tuning Channels LNA (Low Noise Amplifier) Use fine tuning to manually adjust a particular channel for optimal reception. If the TV is operating in a weak-signal area, sometimes the LNA function can improve the reception (a low-noise preamplifier boosts the incoming signal). Press the MENU button. Press the ▲ or ▼ button to select “Channel”, then press the ENTER button. Channel TV Air/CATV Auto Program Add/Delete Fine Tune LNA Channel Scan Move Press the ▲ or ▼ button to select “Fine Tune”, then press the ENTER button. √ √ √ √ √ √ : Air : Off Enter Press the MENU button. Press the ▲ or ▼ button to select “Channel”, then press the ENTER button. Air/CATV Auto Program Add/Delete Fine Tune LNA Channel Scan Return Fine Tune Move Air 4 Press the ▲ or ▼ button to select “LNA”, then press the ENTER button. Air/CATV Auto Program Add/Delete Fine Tune LNA Channel Scan Move Return Adjust Air 4 Reset Move To store the fine tuning setting in the TV’s memory, press the ENTER button. (A star icon(*) will appear.) To reset the fine tuning to “0”, press the ▲ button to select “Reset”, then press the ENTER button. Adjust Press the ▲ or ▼ button to select “On”, then press the ENTER button. • Pressing the ▲ or ▼ button will alternate between “On” and “Off”. Add Return : Air Off : Off On Enter Return Channel TV Air/CATV Auto Program Add/Delete Fine Tune LNA Channel Scan Move Fine Tune Air 4* 10 Move 68 Return Reset Enter Fine Tune 10 : Off √ √ √ √ √ √ Add Move Press the œ or √ button to adjust the fine tuning. : Air Channel TV Reset Channel TV : Air Off : Off On Enter Return Press the MENU button to exit. Return Adjust Add Press the MENU button to exit. 69 P Connecting a PC and Operation Connecting to a PC ......................................................................72 Adjusting the PC Screen................................................................76 Changing the Position of the Image................................................77 Picture Quality Adjustment ............................................................78 Information ..................................................................................81 Connecting to a PC Connection to a Macintosh computer may require in adapter. PDP Pin Configuration D-Sub Cable DVI-D Cable (Digital-Only Connector) • 15Pin Signal Cable (based on protruded pin) Power Plug Use the DVI-D connection cable. (sold separately) or DVI Cable PC Cable Audio Cable PC DVI jack (The actual configuration on your PC may be different, depending on the model.) Setting up Your PDP (Plug and Play) Our adoption of the new VESA Plug and Play solution eliminates complicated and time consuming setup. It allows you to install your monitor in a Plug and Play compatible system, without the usual setup hassles and confusion. Your PC system can easily identify and configure itself for use with your display. This monitor automatically tells the PC system its Extended Display Identification data (EDID) using Display Data Channel (DDC) protocols. Connecting a PC to the PDP Connect a PC (15pin) cable between the PC Output jack (or DVI jack) on the PC and the RGB IN(or DVI IN) Input jack (15p D-SUB) on the PDP. Connect a Audio cable between the Audio (RGB or DVI) on the PC and the Audio L/R (RGB or DVI) input jacks on the PDP. To watch the PC screen: 1. Turn on your PDP 2. Press the TV/VIDEO button on the remote control or SOURCE button on the front panel to select “PC”. 3. Turn on PC and check for PC system requirements. (Refer to pages 74 and 75 for PC system requirements.) 4. Adjust the PC screen. (Refer to pages 76 and 81.) 72 73 How to Set up Your PC Software (Windows only) The Windows display-settings for a typical computer are shown below. However, the actual screens on your PC will probably be different, depending upon your particular version of Windows and your particular video card. But even if your actual screens look different, the same, basic set-up information will apply in almost all cases. (If not, contact your computer manufacturer or Samsung Dealer.) Notes: Both screen position and size will vary, depending on the type of PC monitor and its resolution. The table below shows all of the display modes that are supported: Video Signal On the windows screen, select in the following sequence : Start ➝ Settings ➝ Control Panel. Resolution (Dot X Line) Vertical Frequency(Hz) Horizontal Frequency(KHz) Vertical Polarity 640 X 350 70.086 31.469 720 X 400 70.087 31.469 59.940 31.469 72.809 37.861 75.000 37.500 56.250 35.156 N/P N/P 60.317 37.897 72.188 48.077 75.000 46.875 60 29.838 72 36.072 75 37.650 60.004 48.363 70.069 56.476 75.029 60.023 60.020 63.981 VGA 640 X 480 IBM PC / AT SVGA 800 X 600 Compatible WVGA When the control panel screen appears, click on “Display” and a display dialog-box will appear. XGA * SXGA 848 X 480 1024 X 768 * 1280x1024 Horizontal Polarity nVidia chipset • The interlace mode is not supported. • The PDP operates abnormally if a non-standard video format is selected. • This sheet conforms to IBM/VESA regulations and is prepared on the basis of Analog Input. Select the “Settings” tab in the display dialogbox. • * mode is not supported during the input of DVI. Notes: The two key variables that apply to the PDP-PC interface are “resolution” and “colors”. The correct settings for these two variables are: • When this PDP is used as a PC display, 32-bit color is supported. • Size (sometimes called “resolution”) :640 x 480 pixels. • If a vertical and horizontal frequency-select mode exists, select 60Hz (vertical) and 31.5kHZ (horizontal). • Color: “24-bit” color (might also be expressed as “16 million colors”) Shown at left is a typical screen for “Display” dialog box. • In some cases, abnormal signals (such as stripes) might appear on the screen when the PC power is turned off (or if the PC is disconnected). If so, press the TV/VIDEO button on the remote control or SOURCE button on the front panel to enter the VIDEO mode. Also, make sure that the PC is connected. If a vertical-frequency option exists on your display settings dialog box, the correct value is “60” or “60 Hz”. Otherwise, just click “OK” and exit the dialog box. • Connect only a PC monitor to the monitor output port while viewing the PC screen. (Otherwise, random signals might appear). • Depending on the manufacturer, your PC display screen might appear different. (and depending on your particular version of Windows.) Check your PC instruction book for information about connecting your PC to a PDP. Continued... 74 75 Adjusting the PC Screen Changing the Position of the Image Adjusting the R.G.B After connecting the PDP to your PC, adjust the position of the screen if it is not well-aligned. Preset: • Press the TV/VIDEO button to select “PC.” Preset: • Press the TV/VIDEO button to select “PC”. Press the MENU button. Press the ▲ or ▼ button to select “Picture”, then press the ENTER button. Picture TV Mode Custom Color Tone Color Control Film Mode Size DNIe PIP Move Press the ▲ or ▼ button to select “Color Control”, then press the ENTER button. The “Color Control” is available only when “Color Tone” is set in the custom mode. : Custom : Custom : Off : 16:9 : On Enter Return Setup TV Language Time Caption Digital NR V-Chip Miscellaneous PC √ √ √ √ √ √ √ √ Color TV Press the MENU button. Press the ▲ or ▼ button to select “Setup”, then press the ENTER button. Move Press the ▲ or ▼ button to select “PC”, then press the ENTER button. Press the ▲ or ▼ button to select the item you want to change, then press the œ or √ button to change the value of the item, using the on-screen gauge as your guide. Return Press the ENTER button to select “Position”. Enter Return 50 Adjust the position of screen by pressing the ▲ / ▼/ œ / √ button. Move Return Position TV Press the MENU button to exit. Move 76 √ √ √ √ Position TV Move Return Image Lock Position Information Auto Adjustment Move Enter Enter PC TV 50 50 50 Move : On √ √ √ √ √ √ √ : English Move Return Press the MENU button to exit. 77 Picture Quality Adjustment Picture Automatic Adjustment Coarse Adjustment Preset: Preset: • Press the TV/VIDEO button to select “PC”. • Press the TV/VIDEO button to select “PC”. Press the MENU button. Press the ▲ or ▼ button to select “Setup”, then press the ENTER button. Setup TV Language Time Caption Digital NR V-Chip Miscellaneous PC Move Press the ▲ or ▼ button to select “PC”, then press the ENTER button. Press the ▲ or ▼ button to select “Auto Adjustment”, then press the ENTER button. The message “Auto Adjusting” appears on the screen and the picture adjustments are automatically activated. Enter Return PC TV √ √ √ √ Image Lock Position Information Auto Adjustment Move : On √ √ √ √ √ √ √ : English TV Enter Auto Adjustment Press the MENU button. Press the ▲ or ▼ button to select “Setup”, then press the ENTER button. Setup TV Language Time Caption Digital NR V-Chip Miscellaneous PC Move Press the ▲ or ▼ button to select “PC”, then press the ENTER button. Enter Return Coarse Fine 50 Auto Adjusting Press the MENU button to exit. Air 11 78 √ √ √ √ Image Lock TV Move Return Image Lock Position Information Auto Adjustment Move Press the ▲ or ▼ button to select “Image Lock”, then press the ENTER button. Enter PC TV Return : On √ √ √ √ √ √ √ : English Enter Return Press the ENTER button to select “Coarse”. Coarse 50 Remove picture noise (vertical stripes) on the screen by pressing the œ or √ button. (If Coarse is not set properly, vertical stripes will appear on the screen.) Press the MENU button to exit. 79 Information Fine Tuning (Fine) Preset: • Press the TV/VIDEO button to select “PC”. Preset: Press the MENU button. Press the ▲ or ▼ button to select “Setup”, then press the ENTER button. Language Time Caption Digital NR V-Chip Miscellaneous PC • Press the TV/VIDEO button to select “PC”. Press the MENU button. Press the ▲ or ▼ button to select “Setup”, then press the ENTER button. Setup TV Language Time Caption Digital NR V-Chip Miscellaneous PC : English : On Move Press the ▲ or ▼ button to select “PC”, then press the ENTER button. Enter √ √ √ √ √ √ √ Move : On √ √ √ √ √ √ √ Enter Return : English PC TV √ √ √ √ Image Lock Position Information Auto Adjustment PC TV √ √ √ √ Image Lock Position Information Auto Adjustment Move Press the ▲ or ▼ button to select “Image Lock”, then press the ENTER button. Press the ▲ or ▼ button to select “PC”, then press the ENTER button. Return Move Setup TV Enter Press the ▲ or ▼ button to select “information”, then press the ENTER button. The vertical, horizontal frequencies and resolution appear. Image Lock TV Coarse Fine Return Information TV Resolution H Frequency V Frequency Return Enter : 1152 * 864 : 53.8KHz 60.3 Hz 50 Return Move 80 Press the ▲ or ▼ button to select “Fine”, then press the ENTER button. Remove picture noise on the screen by pressing the œ or √ button. (If Fine is not set properly, noise will appear on the screen.) Press the MENU button to exit. Fine Enter Press the MENU button to exit. Return 81 P Time Setting Setting the Clock .......................................................................84 Setting the Sleep Timer...............................................................85 Setting the Timers ......................................................................86 Setting the Clock Setting the Sleep Timer You can set your PDP to automatically turn off after a preset interval. Press the MENU button. Press the ▲ or ▼ button to select “Setup”, then press the ENTER button. Setup TV Language Time Caption Digital NR V-Chip Miscellaneous PC Move Press the ▲ or ▼ button to select “Time”, then press the ENTER button. Press the ENTER button to select “Clock”. Press the ENTER button to select “Hour”, then press the ▲ or ▼ button to select correct hour. Clock Sleep Timer On Timer Off Timer Press the √ button to select “Min.”, then press the ▲ or ▼ button to select correct minute. Press the √ button to select “am/pm.”, then press the ▲ or ▼ button to select the proper time of day (am or pm). ➤ Quick way to access the sleep timer setting: Just press the “SLEEP” button on the remote control. Move √ √ √ √ Enter Press the ▲ or ▼ button to select “Time”, then press the ENTER button. Clock Sleep Timer On Timer Off Timer Press the ▲ or ▼ button to select “Sleep Timer”, then press the ENTER button. Return √ √ √ √ -- : -- am Off Off Off Move Enter Time TV Return : On √ √ √ √ √ √ √ : English Enter Return Sleep Timer TV am/pm Min Activation 00 am -- Off Move Adjust Return Clock TV Press the ▲ or ▼ button to select the time interval for the PDP to stay on. The interval ranges from 30 to 180 minutes. Move Return Sleep Timer TV Hour Min am/pm Min Activation 12 00 am 30 On Move Adjust Return Clock TV Adjust 84 Language Time Caption Digital NR V-Chip Miscellaneous PC Return -- : -- am Off Off Off Setup TV Min 12 Press the MENU button. Press the ▲ or ▼ button to select “Setup”, then press the ENTER button. 12 Hour Press the MENU button to exit. Hour Adjust Enter Clock TV Adjust : On Time TV Move √ √ √ √ √ √ √ : English Press the √ button to select “Activation”, then press the ▲ or ▼ button to select “On” or “Off”. Move Return Sleep Timer TV Min am/pm Min Activation 00 am 30 Off Move Adjust Return Move Return Press the MENU button to exit. 85 Setting the Timers This PDP can be set to turn on or off automatically at specific times that you choose. Before using the timers, you must set the PDP’s clock, as described previously. Press the MENU button. Press the ▲ or ▼ button to select “Setup”, then press the ENTER button. Setup TV Language Time Caption Digital NR V-Chip Miscellaneous PC Move Press the ▲ or ▼ button to select “Time”, then press the ENTER button. Clock Sleep Timer On Timer Off Timer Press the √ button to select “Min.”, then press the ▲ or ▼ button to select correct minute. Press the √ button to select “am/pm”, then press the ▲ or ▼ button to select the proper time of day (am or pm). Min am/pm 00 am 10 Adjust Move Press the √ button to select “Volume”, then press the ▲ or ▼ button to select the volume level you want when PDP turns on. Min am/pm 00 am Min am/pm 12 00 am Press the √ button to select “Activation”, then press the ▲ or ▼ button to select “On” or “Off”. Volume Activation Air 3 10 Adjust Move Off Return On Timer TV Hour Min am/pm 12 00 am ▲ Volume Activation ▲ Air 3 10 Adjust Move Off Return On Timer TV Hour Min 12 00 am ▲ ▲▲ Channel 12 Hour Channel Return Hour am/pm Volume Activation ▲ Air 3 10 Adjust Move Off Return If you want to set Off Time, press the ▲ or ▼ button to select “Off Time”. Set the “Off Time” just as you set “On Time”. Volume Activation Air 3 10 Adjust Move Off Return On Timer TV Off On Timer On Timer TV Channel Volume Activation Air 3 TV Press the √ button to select “Channel”, then press the ▲ or ▼ button to select the channel you want when PDP turns on. Return 12 Hour Min am/pm 12 00 am Channel 86 √ √ √ √ -- : -- am Off Off Off Enter Return Hour Channel Enter On Timer TV Channel : On Time TV Move Press the ▲ or ▼ button to select “On Timer”, then press the ENTER button. Press the √ button to select “Hour”, then press the ▲ or ▼ button to select correct hour. √ √ √ √ √ √ √ : English 10 Press the MENU button to exit. Volume Activation Air 3 10 Adjust Move Off Note • If you set an On or Off Time, the Power Indicator on the Front Panel changes to Green. Return 87 P Function Description Selecting a Menu Language .....................................................90 Digital Noise Reduction ...........................................................91 Selecting the Film Mode ...........................................................92 Setting the Melody Sound ........................................................93 Setting the Blue Screen.............................................................94 Viewing Closed Captions .........................................................95 Using the V-Chip .....................................................................96 Selecting a Menu Language Digital Noise Reduction If the broadcast signal received by your TV is weak, you can activate the Digital Noise Reduction feature to help reduce any static and ghosting that may appear on the screen. Press the MENU button. Press the ▲ or ▼ button to select “Setup”, then press the ENTER button. Setup TV Language Time Caption Digital NR V-Chip Miscellaneous PC Move Press the ENTER button to select “Language”. Language Time Caption Digital NR V-Chip Miscellaneous PC Press the ▲ or ▼ button to select the appropriate language: “English”, “Français” or “Español”. 90 Press the MENU button to exit. Return Enter Press the MENU button. Press the ▲ or ▼ button to select “Setup”, then press the ENTER button. Setup TV Language Time Caption Digital NR V-Chip Miscellaneous PC Move Press the ▲ or ▼ button to select “Digital NR”, then press the ENTER button. Language Time Caption Digital NR V-Chip Miscellaneous PC Move Press the ▲ or ▼ button to select “On” or “Off”, then press the ENTER button. Enter Return : English : On Off On Enter Return Setup TV Language Time Caption Digital NR V-Chip Miscellaneous PC Move Sortie : On √ √ √ √ √ √ √ : English Setup TV Return Langue : Français English Heure Français Sous-titres Spanish Réduct. bruit num. : Marche puce V Divers PC Entrée : English English French Spanish : On Configuration TV Dépl Enter Setup TV Move : On √ √ √ √ √ √ √ : English : English : On Off On Enter Return Press the MENU button to exit. 91 Selecting the Film Mode Setting the Melody Sound On: Automatically senses and processes film signals from all sources and adjusts the picture for optimum quality. You can hear clear melody sound when the television is powered on or off. Off: Switches off the Film mode. Press the MENU button. Press the ▲ or ▼ button to select “Picture”, then press the ENTER button. Picture TV Mode Custom Color Tone Color Control Film Mode Size DNIe PIP Move Press the ▲ or ▼ button to select “Film Mode”, then press the ENTER button. Mode Custom Color Tone Color Control Film Mode Size DNIe PIP Note : Normal : Off : 16:9 : On Enter Mode Custom Color Tone Color Control Film Mode Size DNIe PIP Press the MENU button. Press the ▲ or ▼ button to select “Setup”, then press the ENTER button. Return Setup TV Language Time Caption Digital NR V-Chip Miscellaneous PC √ √ √ √ √ √ √ √ Move Press the ▲ or ▼ button to select “Miscellaneous”, then press the ENTER button. : On √ √ √ √ √ √ √ Enter Return : English Miscellaneous TV : Custom Melody Plug & Play Blue Screen : On : On √ √ √ Move Enter Return : Normal : Off Off : 16:9 On : On Enter Return Picture TV Move Press the MENU button to exit. : Custom Picture TV Move Press the ▲ or ▼ button to select “On” or “Off”, then press the ENTER button. Press the ▲ or ▼ button to select “Melody”, press the ENTER button. TV Press the ▲ or ▼ button to change the setting. (On or Off). TV Miscellaneous Melody Plug & Play Blue Screen : Custom : On Off On : On : Normal : Off Off : 16:9 On : On Enter Move Return Enter Return Miscellaneous Melody Plug & Play Blue Screen Move : On Off On : On Enter Return • Film mode is supported in Video, S-Vide and Component 480i. 92 93 1 Setting the Blue Screen Viewing Closed Captions If no signal is being received or the signal is very weak, a blue screen automatically replaces the noisy picture background. If you wish to continue viewing the poor picture, you must set the “Blue Screen“ mode to “Off“. Your TV decodes and displays the closed captions that are broadcast with certain TV shows. These captions are usually subtitles for the hearing impaired or foreign language translations. All VCRs record the closed caption signal from television programs, so home-recorded video tapes also provide closed captions. Most prerecorded commercial video tapes provide closed captions as well. Check for the closed caption symbol in your television schedule and on the tape’s packaging: Press the MENU button. Press the ▲ or ▼ button to select “Setup”, then press the ENTER button. Setup TV Language Time Caption Digital NR V-Chip Miscellaneous PC Move Press the ▲ or ▼ button to select “Miscellaneous”, then press the ENTER button. Press the ▲ or ▼ button to select “Blue Screen”, Press the ENTER button. Melody Plug & Play Blue Screen Press the ▲ or ▼ button to change the setting. (On or Off). ➤ Blue Screen is displayed while no signal from the external device Enter Note: The Caption feature does not work with DVD or DTV signals. Press the MENU button. Press the ▲ or ▼ button to select “Setup”, then press the ENTER button. Press the ▲ or ▼ button to select “Caption”, then press the ENTER button. : On Language Time Caption Digital NR V-Chip Miscellaneous PC Return : On Enter √ √ √ Setup TV Move Press the ENTER button to select “Caption”. Press the ▲ or ▼ button to turn closed caption on/off, then press the ENTER button. Enter Return Caption TV Caption Mode Channels Field Return : On √ √ √ √ √ √ √ : English On Off Caption On Miscellaneous TV Melody Plug & Play Blue Screen Move : On √ √ √ √ √ √ √ Miscellaneous TV Move : English : On Move : On Off On Enter Press the ▲ or ▼ button to select “Mode”, then press the ENTER button. Press the ▲ or ▼ button to select “Text” or “Caption”, then press the ENTER button. Return Caption TV Caption Mode Channels Field Return Enter On Caption Caption 1 Text Miscellaneous TV Melody Plug & Play Blue Screen in the External Mode, regardless of the Blue Screen Setting. Move : On Move : On Off On Enter Depending on the particular broadcast, it might be necessary to make changes to “Channels” and “Field”: Press the ▲ / ▼/ œ / √ button to make the changes. (Follow the same procedure as in steps 3 above.) Press the MENU button to exit. Return Enter Return Caption TV Caption Mode Channels Field Move On Caption 1 1 1 2 Enter Return Note • Different channels and fields display different information: Field 2 carries additional information that supplements the information in Field 1. (For example, Channel 1 may have subtitles in English, while Channel 2 has subtitles in Spanish.) 94 95 Using the V-Chip The V-Chip feature automatically locks out programs that are deemed inappropriate for children. The user must enter a PIN (personal ID number) before any of the V-Chip restrictions are set up or changed. Note: When the V-chip feature is activated, the PIP and auto channel program features do not function. Setting Up Your Personal ID Number (PIN) Press the MENU button. Press the ▲ or ▼ button to select “Setup”, then press the ENTER button. Language Time Caption Digital NR V-Chip Miscellaneous PC : On Press the ▲ or ▼ button to select “V-Chip”, then press the ENTER button. The message “Enter PIN” will appear. Enter your 4digit PIN number. Enter Return V-Chip TV Move Press the ▲ or ▼ button to select “V-Chip”, then press the ENTER button. The message “Enter Pin” will appear. Enter your 4digit PIN number. TV Enter PIN Return V-Chip The “V-Chip” screen will appear. To enable the V-Chip feature, press the ENTER button so that the “V-Chip Lock” field is “On”. (Pressing the ▲ or ▼ button will alternate between “On” and “Off”.) Press the MENU button to exit. Return V-Chip TV V-Chip Lock : Off Off TV Parental Guidelines On MPAA Rating Change Pin Enter New PIN TV Return Enter Return V-Chip Confirm New PIN Enter PIN Return Enter PIN Enter PIN Enter : English V-Chip TV Move The Change pin screen will appear. Choose any 4digits for your PIN and enter them. As soon as the 4 digits are entered, the “Confirm New Pin” screen appears. Re-enter the same 4 digits. When the Confirm screen disappears, your PIN has been memorized. : On √ √ √ √ √ √ √ Language Time Caption Digital NR V-Chip Miscellaneous PC Enter PIN The “V-Chip” screen will appear. Press the ▲ or ▼ button to select “Change Pin”, then press the ENTER button. Setup TV Enter PIN Note: The default PIN number of a new TV set is “0-0-0-0”. Press the MENU button. Press the ▲ or ▼ button to select “Setup”, then press the ENTER button. √ √ √ √ √ √ √ : English Move Setup TV How to Enable/Disable the V-Chip Return Press the MENU button to exit. Note • If you forget the PIN, press the remote-control buttons in the following sequence, which resets the pin to 0-0-0-0 : Power Off. ➔ Mute ➔ 8 ➔ 2 ➔ 4 ➔ Power On. 96 97 6 How to Set up Restrictions using the “TV guidelines” First, set up a personal identification number (PIN), and enable the V-Chip. (See previous section.) Parental restrictions can be set up using either of two methods: The TV guidelines or the MPAA rating. Press the MENU button. Press the ▲ or ▼ button to select “Setup”, then press the ENTER button. Press the ▲ or ▼ button to select “V-Chip”, then press the ENTER button. The message “Enter PIN” will appear. Enter your 4digit PIN number. : On √ √ √ √ √ √ √ Enter Return Language Time Caption Digital NR V-Chip Miscellaneous PC Move : English TV 98 The “TV Parental Guidelines” screen will appear. Press the ▲ or ▼ button to select one of the six ages based cate gories: TV-Y TV-Y7 Young children Children 7 and over TV-G TV-PG TV-14 TV-MA General audience Parental guidance Viewers 14 and over Mature audience Note 2: The V-Chip will automatically block certain categories that are “more restrictive”. For example, if you block “TV-Y” category, then TV-Y7 will automatically be blocked. Similarly, if you block the TV-G category, then all the categories in the “young adult” group will be blocked (TV-G, TV-PG, TV-14 and TV-MA). The sub-ratings (D, L, S, V) work together similarly. (See next section.) TV Return How to set the FV, D, L, S and V sub-ratings. First, select one of these TV-Ratings: TV-Y7, TV-PG, TV-14 or TV-MA (See Step 4, on previous page). Next, while the TV-Rating is selected, repeatedly press the √ button. This will cycle through the available sub-ratings (FV, L, S, D or V). A letter (“U” or “B”) will be displayed for each sub-rating. While the “U” or “B” is selected, press the ▲ or ▼ button to change the sub-rating. Press the √ button to save the TV guidelines. A TV-Rating will be selected and no letters will be selected. To select a different TV-Rating, press the UP or DOWN button and then repeat the process. Note: The V-chip will automatically block certain categories that are “More restrictive” . For example, if you block “L” sub-rating in TV-PG, then the “L” sub-ratings in TV-14 and TVMA will automatically be blocked. Press the MENU button to clear all the screens. (Or proceed to the next section, and set up additional restrictions based on the MPAA codes). TV Parental Guidelines Move FV: Fantasy violence D: Sexually Suggestive Dialog L: Adult Language S: Sexual situation V: Violence Enter PIN Enter PIN The “V-Chip” screen will appear. Press the ▲ or ▼ button to select “TV Parental Guidelines”, then press the ENTER button. Note 1: The TV-Y7, TV-PG, TV-14 and TV-MA have additional options. See the next step to change any of the following sub-ratings: V-Chip TV While the “U” or “B” is selected, press the ▲ or ▼ button to block or unblock the category. Press the √ button to save the TV guidelines. A TV-Rating will be selected, and no letters will be selected. To select a different TV-Rating, press the ▲ or ▼ button and then repeat the process. Setup TV Enter At this point, one of the TV-Ratings is selected. Press the √ button: Depending on your existing setup, a letter “U” or “B” will be selected. (U= Unblocked, B= Blocked) Return TV Parental Guidelines Note Move Enter Return • These categories consist of two separate groups: TV-Y and TV-Y7 (young children through age 7), and TV-G through TV-MA (everybody else). The restrictions for these two groups work independently: If a household includes very young children as well as young adults, the TV guidelines must be set up separately for each age group. (See next step.) 99 How to Set up Restrictions using the MPAA Ratings: G, PG, PG-13, R, NC-17, X How to Reset the TV after the V-Chip Blocks a Channel (“Emergency Escape”) The MPAA rating system uses the Motion Picture Association of America (MPAA) system, and its main application is for movies. When the V-Chip lock is on, the TV will automatically block any programs that are coded with objectionable ratings (either MPAA or TV-Ratings). If the TV is tuned to a restricted channel, the V-Chip will block it. The screen will go blank and the following message will appear: “Excessive rating”. Press the MENU button. Press the ▲ or ▼ button to select “Setup”, then press the ENTER button. Setup TV Press the ▲ or ▼ button to select “V-Chip”, then press the ENTER button. The message “Enter Pin” will appear. Enter your 4digit PIN number. : On √ √ √ √ √ √ √ Press the MENU button. Press the ▲ or ▼ button to select “Setup”, then press the ENTER button. Enter Return Press the ▲ or ▼ button to select “V-Chip”, then press the ENTER button. Enter your PIN number, and press the √ button to temporarily disable the V-Chip Lock. Language Time Caption Digital NR V-Chip Miscellaneous PC Move : English V-Chip TV Enter PIN Enter PIN The “V-Chip” screen will appear. Press the ▲ or ▼ button to select “MPAA Rating”, then press the ENTER button. The “MPAA Rating” screen will appear. Repeatedly press the ▲ or ▼ button to select a particular MPAA category. Pressing the ▲ or ▼ button will cycle through the MPAA categories: General audience (no restrictions). PG Parental guidance suggested. PG-13 PG-13 (Parents strongly cautioned). R (Restricted. Children under 17 should be accompanied by an adult). Return MPAA Rating TV Move To resume normal viewing, tune to a different channel using the number buttons. Under certain conditions (depending on the rating of the local TV programs) the V-Chip might lock out all the channels. In this case, use the V-Chip function for an “emergency escape”: Enter Return MPAA Rating TV Move Enter Return NC-17 No children under age 17. X (Adults only). NR Not rated. While a particular category is selected, press the √ button to activate it. A selected letter (“U” or “B”) will be displayed. Press the ▲ or ▼ button to select “U” or “B”. Press the √ button to save the settings. Note: The V-Chip will automatically block any category that is “more restrictive”. For example, if you block the “PG-13” category, then “R”, “NC-17” and “X” will automatically be blocked also. 100 101 P Appendix Troubleshooting..........................................................................104 Care and Maintenance ..............................................................105 Specifications ............................................................................106 Care and Maintenance Troubleshooting Before you call a service technician, please scan this list of problems and possible solutions. It may save you time and money. With proper care, your PDP will give you many years of service. Please follow these guidelines to get the maximum performance from your PDP. Identifying Problems Problem Possible Solution Poor picture. Check all wire connections. Your Remote control does not operate the PDP. Press the “MODE” button to put your remote control in the “TV” mode. The PDP won’t turn on. Check if the power plug is connected. There is no screen image. Check to see that both the PDP and the source are plugged in and turned on. • • • • Do not put the PDP near extremely hot, cold, humid or dusty places. Do not put the PDP near appliances that create magnetic fields. Keep the ventilation openings clear. Do not place the PDP on a rough and slanted surface, such as cloth or paper. Liquids • Do not place liquids near or on the PDP. Cabinet 104 The image is too light or too dark. Adjust the Brightness or Contrast settings. The image is too large or too small. Adjust the Size settings. • Never open the cabinet or touch the parts inside. • Wipe your PDP with a clean, dry cloth. Never use water, cleaning fluids, wax, or chemicals. • Do not put heavy objects on top of the cabinet. Temperature • If your PDP is suddenly moved from a cold to a warm place, unplug the power cord for at least two hours so that moisture that may have formed inside the unit can dry completely. 105 Specifications Memo Exterior design and product specifications are subject to change without prior notice to improve the performance of this product. This PDP applies to Class B digital device. (Note: Class B system is for home use.) This PDP has been registered for residential use in terms of EMI. So it can be used in all areas as well as residential areas. Type No MZ42S4 Model SPP4251 Dimensions Display Remote Control Weight Display Remote Control Voltage Power Consumption Number of Pixels Screen Size ANTENNA input VIDEO input 1050 (W) X 86 (D) X 755 (H) mm 59 (W) X 22 (D) X 209 (H) mm 36kg 164g (including batteries) 120V~, 60Hz 330 W 1024(H) x 768(V) 107 Cm/42 inches VHF, UHF (75Ω unbalanced) AV1 AV2 AV3(SIDE) S-VIDEO 1 S-VIDEO 2 (SIDE) COMPONENT 1 - 480i / 480p / 720p / 1080i COMPONENT 2 - 480i / 480p / 720p / 1080i RGB : PC DSUB 15P DVI AUDIO input AV1 AV2/ S-VIDEO 1 AV3(SIDE) / S-VIDEO 2 COMPONENT 1 - 480i / 480p / 720p / 1080i COMPONENT 2 - 480i / 480p / 720p / 1080i PC DVI AUDIO output 106 15W+15W (8 Ω) - Internal Speaker 107 Memo 108 Memo 109
Source Exif Data:
File Type : PDF File Type Extension : pdf MIME Type : application/pdf PDF Version : 1.4 Linearized : No Modify Date : 2003:12:29 11:23:54-05:00 Create Date : 2003:12:29 11:23:38-05:00 Title : SPP4251(BN68-00566A-01)cover Author : cyj Creator : QuarkXPress..: AdobePS 8.7.3 (301) Producer : Acrobat Distiller 5.0.5 for Macintosh Page Count : 40 Mod Date : 2003:12:29 11:23:54-05:00 Creation Date : 2003:12:29 11:23:38-05:00 Metadata Date : 2003:12:29 11:23:54-05:00EXIF Metadata provided by EXIF.tools