Samsung Electronics Co SPWB4319S WLAN Module User Manual

Download:
Mirror Download [FCC.gov]
Document ID	1569894
Application ID	zRBSWVYcEXnywmZZjNjNQw==
Document Description	User manual
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	19.91kB (248849 bits)
Date Submitted	2011-10-28 00:00:00
Date Available	2012-04-24 00:00:00
Creation Date	2011-10-26 13:56:42
Producing Software	Acrobat Distiller 9.4.6 (Windows)
Document Lastmod	2011-10-26 13:56:42
Document Title	Microsoft Word - WLAN_SDIO_User_Manual & Specification_111025 - ENG.doc
Document Creator	PScript5.dll Version 5.2.2
Document Author:	Will

Specification
User Manual
SPW-B4319S
802.11b/g/n WLAN Module
REV 0.1
Samsung Electronics
1/17
Specification
Revision History
Revision
0.1
0.2
0.3
REV 0.1
Date
2011-09-01
2011-09-26
2011-10-10
Descriptions
Created
Update the module picture and table for WLAN Spec.
Update the Power Table
Samsung Electronics
2/17
Specification
Table of Contents
REVISION HISTORY .................................................................................................................. 2
GENERAL DESCRIPTION..................................................................................................... 4
1.1 FUNCTIONAL DESCRIPTION ..........................................................................................................4
1.2 FEATURES ...............................................................................................................................4
1.3 APPLICATIONS..........................................................................................................................5
1.4 DIMENSION AND PIN ASSIGNMENTS ...............................................................................................5
OPERATING CONDITIONS .................................................................................................. 7
2.1 MAXIMUM POWER SUPPLY RATING ................................................................................................7
2.2 CONNECTION TO HOST .............................................................................................................7
2.3 GROUND CONNECTION ...............................................................................................................7
2.4 STORAGE CONDITION ................................................................................................................7
2.5 ABSOLUTE MAXIMUM RATINGS .....................................................................................................8
2.6 CURRENT CONSUMPTION ............................................................................................................8
RF SPECIFICATION ............................................................................................................ 9
3.1 SUPPORTABLE MODULATION SCHEME & DATA RATES .........................................................................9
3.2 11B RF SPECIFICATION ............................................................................................................ 10
3.3 11G RF SPECIFICATION ...................................................... 오류! 책갈피가 정의되어 있지 않습니다.
3.4 11N RF SPECIFICATION ...................................................... 오류! 책갈피가 정의되어 있지 않습니다.
3.5 CHANNEL & CENTER FREQUENCY ................................................................................................ 10
REV 0.1
Samsung Electronics
3/17
Specification
General Description
1.1 Functional Description
SPW-B4319S is the low power SDIO module for 802.11b/g/n wireless LAN (WLAN) aimed at embedded
applications. SPW-B431U is the SDIO module that adopts a single-chip wireless local area network
(WLAN) medium-access controller (MAC) spread-spectrum baseband processor and 2.4 GHz RF radio.
SPW-B4319S supports IEEE 802.11b, 802.11g and 802.11n standards,
SPW-B4319 supports only 20MHz band width.
SPW-B4319 supports 1 Tx and 1 Rx Antenna (1x1, SISO).
SPW-B4319 supports 2412 ~ 2462 MHz.
SPW-B4319S provides crucial power management functionality and requires only a single 3.3V or 5.0 V
supply voltage
Figure 1-1 SPW-B4319S
1.2 Features

Wi-Fi compliant

Security: WEP, WPA-PSK, WPA2-PSK, WMM, WMM-PS, TKIP, and AES hardware acceleration

Host interface: SDIO

Low power consumption

Single 3.3V or 5.0 V external supply voltage required
REV 0.1
Samsung Electronics
4/17
Specification
1.3 Applications

This WLAN module is installed into the Samsung Wi-Fi printer through SDIO
interface between this WLAN module and the system board of the Samsung printer
set.
SDIO Interface
Printer
WIFI Module
3.3V Power Supply
System Board
(BCM4319)
1.4 Dimension and Pin Assignments
1.4.1 Mechanical Dimension
Figure 1-2 SPW-B4319U
REV 0.1
Samsung Electronics
5/17
Specification
1.4.2 HOST Interface
SDIO Interface : 11 pin
Table 1-1 CON1 PIN Description
REV 0.1
No.
Pin Name
Description
VDD_3.3V
3.3V Power from Host
SDIO_CLK
Clock for SDIO I/F
SDIO_DATA_0
DATA_0 for SDIO I/F
SDIO_DATA_1
DATA_1 for SDIO I/F
SDIO_DATA_2
DATA_2 for SDIO I/F
SDIO_DATA_3
DATA_3 for SDIO I/F
10
SDIO_CMD
DATA_4 for SDIO I/F
11
GPIO_0
General Purpose I/O
2,4,9
GND
GND
Samsung Electronics
6/17
Specification
Operating Conditions
1.5 Maximum Power Supply Rating
The supply Voltage of SPW-B4319S is 5V, do follow the Maximum Rating in 3.1.
1.6 Connection to HOST
SPW-B4319S will work properly only if connecting to SDIO Interface.
1.7 Ground Connection
SPW-B4319S does not need special ground, but uses the ground wire in HOST Interface.
1.8 Storage Condition
It needs proper condition for protecting the rust.
- Temperature : 0 ~ +50 °C
- Humidity : lower level recommended , 25% ~ 65%RH
- Max Storage Limit : Within 6 Month from Production
REV 0.1
Samsung Electronics
7/17
Specification
1.9 Absolute Maximum Ratings
Symbol
Parameter
DC supply
DC supply voltage from HOST
DC for I/O
SDIO Compliant
ESD*
Electro-static discharge voltage
IEC1000-4~2
POINT: CON1, CON12
TS
Storage temperature
TO
Operating temperature
Conditions
Min.
Nom.
Max.
Unit
3.3V applied
+3.1
+3.3
+3.5
5V applied
+4.85
+5.0
+5.25
AIR
5K
Contact
1K
-20
+85
°C
+60
°C
Min.
Nom.
Max.
Unit
11b (Tx pwr: 13 dBm)
250
<300
mA
11g/n (Tx pwr: 14 dBm)
200
<250
mA
* Final specification will be fixed later.
1.10 Current Consumption
Symbol
Parameter
Current
consumption *
Transmit current value
* It can be different to test condition.
REV 0.1
Samsung Electronics
8/17
Specification
RF Specification
All measurements are made under nominal power supply and room temperature 25 °C unless specified.
RF specification of SPW-B4319S was defined according to 802.11b/g mandatory
2.1 Supportable Modulation Scheme & Data Rates
Spacing
20MHz
802.11n
OFDM
40MHz
802.11g
OFDM
802.11b
MCS1
13
MCS2
19.5
MCS3
26
MCS4
39
MCS5
52
MCS6
58.5
MCS7
65
MCS0
15
MCS1
30
MCS2
45
MCS3
60
MCS4
90
MCS5
120
MCS6
135
MCS7
150
Remark
Mandatory
Not Supported
Modulation
Coding rate
BPSK
1/2
Data rates
(Mbps)
BPSK
3/4
Supported
Supported
QPSK
1/2
12
Supported
QPSK
3/4
18
Supported
16-QAM
1/2
24
Supported
16-QAM
3/4
36
Supported
64-QAM
1/2
48
Supported
64-QAM
3/4
54
Supported
DBPSK
NA
DQPSK
NA
NA
5.5
NA
11
CCK
REV 0.1
MCS0
Data rates
(Mbps)
6.5
Rate
Samsung Electronics
Remark
Supported
9/17
Specification
2.2 RF Specification
Data Rate
/ TRx
Item
Min
Nom
Max
Unit
11Mbps/Tx
Power
12
13
14
dBm
54Mbps/Tx
Power
12
13
14
dBm
65Mbps/Tx
Power
12
13
14
dBm
11Mbps/Tx
Freq. Tolerance
-25
14
25
ppm
54Mbps/Tx
Freq. Tolerance
-25
14
25
ppm
65Mbps/Tx
Freq. Tolerance
-25
14
25
ppm
11Mbps/Tx
EVM
12
16
54Mbps/Tx
EVM
-45
-32
-25
dB
65Mbps/Tx
EVM
-45
-32
-28
dB
11Mbps/Rx
Sensitivity
N/A
-86
-84
dBm
54Mbps/Rx
Sensitivity
N/A
-74
-72
dBm
65Mbps/Rx
Sensitivity
N/A
-72
-70
dBm
2.3 Channel & Center Frequency
Channel No
Center Frequency
[Mbps]
FCC, IC
ETSI
Korea
2412
2417
2422
2427
2432
2437
2442
2447
REV 0.1
2452
10
2457
11
2462
12
13
2467
2472
Samsung Electronics
10/17
Specification
FCC Compliance
FCC Statement
This device complies with Part 15 of the FCC Rules. Operation is subject to the
following two conditions:
(1) this device may not cause harmful interference, and (2) this device must accept
any interference received, including interference that may cause undesired operation.
Caution
Any changes or modifications NOT explicitly APPROVED by Samsung Electronics Co.,
Ltd. could cause the SPW-B4319S module to cease to comply with FCC rules part 15,
and thus void the user's authority to operate the equipment.
RF-exposure statement
These modular transmitters, SPW-B4319S , comply with FCC radiation exposure limits
set forth for an uncontrolled environment. The SPW-B4319S should be installed and
operated with minimum distance 20cm between the antenna and the body of the user or
nearby persons. The OEM integrator has to be aware not to provide information to the
end user regarding how to install or remove this RF module in the users manual of the
end product which integrate this module.
This device is intended only for OEM integrators under the following conditions:
1) The antenna must be installed such that 20 cm is maintained between the antenna
and users, and 2) The transmitter module may not be co-located with any other
transmitter or antenna.
As long as the 2 conditions above are met, further transmitter testing will not be required.
However, the OEM integrator is still responsible for testing their end product for any
additional compliance requirements required with this module installed (for example,
digital device emissions, PC peripheral requirements, etc.).
IMPORTANT NOTE: In the event that these conditions cannot be met (for example
certain laptop configurations or co-location with another transmitter), then the FCC
authorization is no longer considered valid and the FCC ID and IC number cannot be
used on the final product. In these circumstances, the OEM integrator will be
responsible for re-evaluating the end product (including the transmitter).
Antenna
These modular transmitters are for OEM integrations only. The end-user product will be
installed in such a manner that only the authorized antennas are used.
REV 0.1
Samsung Electronics
11/17
Specification
Label and manual requirements for the End Product
For an end product using the SPW-B4319S there must be a label containing, at least,
the following information:
For FCCID
For IC number
This device contains
FCC ID : A3LSPWB4319S
This device contains
IC ID : 649E-SPWB4319S
The label must be affixed on an exterior surface of the end product such that it will be
visible upon inspection in compliance with the modular approval guidelines.
Where the SPW-B4319S will be installed in final products larger than 8cm x 10cm
following statements has to be placed ONTO the device.
The users manual for end users must include the following information in a prominent
location "IMPORTANT NOTE: To comply with RF exposure compliance requirements,
the antenna used for this transmitter must be installed to provide a separation distance
of at least 20 cm from all persons and must not be co-located or operating in
conjunction with any other antenna or transmitter."
IC NOTICE TO USER: This device complies with Industry Canada license-exempt RSS
standard(s).Operation is subject to the following two conditions: (1) this device may
notcauseinterference, and (2) this device must accept any interference,
includinginterferencethat may cause undesired operation of the device.
RÉGLEMENTATION IC : Cet appareil est conforme avec Industrie Canada RSS
standard exempts delicense (s). Son fonctionnement esiddiii(1)ild'ifé(2)ildiit soumis aux
deux conditions suivantes: (1)cet appareil ne peut pas provoquer d'interférences et (2)
cet appareil doitaccepter toute interférence, y compris les interférences qui peuvent
causer unmauvais fonctionnement du dispositif.
REV 0.1
Samsung Electronics
12/17
Specification
EU Compliance
Regulatory compliance of the SPW-B4319S
The SPW-B4319S are made for OEM integrations only. The European regulations
applying to the SPW-B4319S is the R&TTE Directive 1999/5/EC.
SPW-B4319S meets the following requirements of the R&TTE Directive.
The conformity assessment for the SPW-B4319S was completed in accordance with the
R&TTE Directive Annex IV procedures, and the EC Declaration of Conformity is
attached to this manual.
Cautions regarding regulatory compliance when integrating the SPW-B4319S
The person integrating the SPW-B4319S becomes the manufacturer of the final product
and is therefore responsible for demonstrating compliance of the product with the
essential requirements of the R&TTE Directive.
In all cases assessment of the final product must be made against the Essential
requirements of the R&TTE Directive Article 3.1(a) and (b), safety and EMC respectively,
and any relevant Article
3.3 requirements
This device is intended only for OEM integrators under the following conditions:
1. This appliance and its antenna must not be co-located or operating in conjunction
with any other antenna or transmitter.
2. A minimum separation distance of 20 cm must be maintained between the antenna
and the person for this appliance to satisfy the RF exposure requirements of the Council
recommendation 1999/519/EC of 12 July 1999.
As long as the 2 conditions above are met, no further evaluation under Article 3.2 of the
R&TTE Directive and do not require further involvement of an R&TTE Directive Notified
REV 0.1
Samsung Electronics
13/17
Specification
Body for the final product. In all other cases, or if the manufacturer of the final product is
in doubt then the equipment integrating the radio module must be assessed against
Article 3.2 of the R&TTE Directive.
Please note that this product, SPW-B4319S , uses radio frequency bands not
harmonized throughout the Community. This product is classified as Class 2 radio
equipment for which some Member States apply restrictions on placing on the market
and in use. Any parties putting Class 2 radio equipment on the market must notify the
relevant national spectrum management authority of their intention, and the radio
equipment must be given a Class Identifier (alert symbol).
Antenna
This product, SPW-B4319S, is for OEM integrations only. The end-user product will be
installed in such a manner that only the authorized antennas are used.
Enclosure
This product, SPW-B4319S, is made for integrating in another final product. For this
reason, there are some parts of the final product on which the SPW-B4319S depends
for regulatory compliance regarding EMC and safety. The SPW-B4319S is mounted on
the circuit board of the final product, and must be contained inside the case of the final
product. Integrated the SPW-B4319S in the final product so that its surfaces are not in
contact with the outside.
Documentation
In the documentation for the conformity assessment of the final product, state clearly
that the SPW-B4319S is integrated in the system.
Conformity Assessment of the Products integrating the SPW-B4319S
The following is a supplementary explanation of conformity assessments for final
products integrating the radio modules such as the SPW-B4319S , that have passed
conformity assessments in accordance with the R&TTE Directive. The procedures for
conformity assessment in accordance with the R&TTE Directive are the responsibility of
the manufacturer of the final product. With final products integrating radio modules, the
person who integrates the module in the system becomes the manufacturer of the final
product, and it is their responsibility to certify that the requirements of the R&TTE
Directive and met.
Exemption from conformity assessment
However, if radio modules that meet the requirements of the R&TTE Directive and that
have passed the conformity assessment are integrated in a final product that follows the
cautions concerning integrating radio modules, they are exempted from the conformity
assessment for R&TTE Directive Article 3.2 (efficient use of the radio spectrum). For
REV 0.1
Samsung Electronics
14/17
Specification
details, refer to the following Guidance and ETSI Technical Report from the R&TTE
Compliance Association, and check whether your case applies.
REV 0.1
Samsung Electronics
15/17
Specification
Conformity assessment procedures for final products exempted from R&TTE
Directive Article 3.2
In every case, the manufacturer of a final product must follow the procedures for
conformity assessment of the final product with the requirements of R&TTE Directive
Article 3.1(a) and (b), for safety and EMC. The conformity assessment for Article 3.2
is carried out in accordance with the following:
1) Attach the EN 300 328 test report of the assessed radio module and the EC
Declaration of Conformity to the conformity assessment of the final product (The
Declaration of Conformity is attached to the manual).
2) Specify on the conformity assessment of the end product that the assessed radio
module was integrated in the system without any changes, in accordance with the
installation directions of the manufacturer.
Notification of the final product
Please note that this product, SPW-B4319S , uses radio frequency bands not
harmonized throughout the Community. The notification required by R&TTE Directive
Article 6(4) is necessary. It is the responsibility of the manufacturer of the final product
to notify the relevant national spectrum management authority of the intention to place
the final product on the market.
CE marking
It is necessary to attach the CE mark to the final product to indicate that it conforms with
all the directives that apply to the final product. It must be given a Class Identifier (alert
symbol) in addition to the CE mark.
Exemption clause
Samsung Electronics Co., Ltd. does not guarantee the accuracy of the information
above. In case of doubt or uncertainty, we recommend that you check with the
authorities or official certification organizations of the relevant countries.
REV 0.1
Samsung Electronics
16/17
Specification
EC Declaration of Conformity
Samsung Electronics Co., Ltd.
of #416 Maetandong, Youngtonggu, Suwonsi, Gyeonggido, Korea of Samsung
declares under our sole responsibility that the product
WLAN Module
model " SPW-B4319S "
to which this declaration relates is in conformity
with
R&TTE Directive 1999/5/EC
By application of the following standards
Notified UL Apex Co., Ltd.
Body
4383-326, Asama-cho, Ise-shi, Mie 516-0021, JAPAN
EU Identification Number: 0983
Documentary evidence to demonstrate conformity
REV 0.1
Samsung Electronics
17/17

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.5
Linearized                      : Yes
Author                          : Will
Create Date                     : 2011:10:26 13:56:42+09:00
Modify Date                     : 2011:10:26 13:56:42+09:00
XMP Toolkit                     : Adobe XMP Core 4.2.1-c043 52.372728, 2009/01/18-15:08:04
Creator Tool                    : PScript5.dll Version 5.2.2
Producer                        : Acrobat Distiller 9.4.6 (Windows)
Format                          : application/pdf
Title                           : Microsoft Word - WLAN_SDIO_User_Manual & Specification_111025 - ENG.doc
Creator                         : Will
Document ID                     : uuid:7fe2416e-7225-4e97-af30-81e8ec4564e4
Instance ID                     : uuid:373fefbc-b762-4877-8edc-4a6aa05b5acb
Page Count                      : 17

EXIF Metadata provided by EXIF.tools