Samsung Electronics Co WEG720B Wi-Fi Transmitter User Manual Operation description WEG720B

Samsung Electronics Co Ltd Wi-Fi Transmitter Operation description WEG720B

User Manual

Manual For WEG720B Wi-Fi module(2.4 GHz, 5GHz, a/b/g/n, AC) - Model name : WEG720B - Operation Temperature : 0℃ ~ +70℃ - Power : +5V ±5% (+4.75V ~ +5.25V) 1. Introduction WEG720B is a USB embedded module compliant with IEEE802.11ac standard. The core chipset is from Broadcom, part number is BCM43526KMLG. And WEG720B automatically discontinue transmission in case of either absence of information to transmit or operational failure.
Technical Information for FCC Freq. (MHz) CH Support IEEE802.11 and BW Active Scan Passive Scan Client Only DFS Mobile Hop spot Wi-Fi Direct Peer to Peer Ad-hoc Radar Detection 2412 1 802.11b/g/n(HT20) & BW = 20MHz YES NO YES NO NO YES YES YES NO 2417 2 2422 3 2427 4 2432 5 2437 6 2442 7 2447 8 2452 9 2457 10 2462 11 2422 3 802.11n(HT40) & BW = 40MHz YES NO YES NO NO YES YES YES NO 2427 4 2432 5 2437 6 2442 7 YES NO YES NO NO YES YES YES NO 2447 8 2452 9 Freq. (MHz) CH Support IEEE802.11 and BW Active Scan Passive Scan Client Only DFS Mobile Hop spot Wi-Fi Direct Peer to Peer Ad-hoc Radar Detection 5745 149 802.11a/n(HT20) /ac(VHT20) & BW = 20MHz YES NO YES NO NO YES YES YES NO 5765 153 5785 157 5805 161 5825 165 5755 151 802.11n(HT40) /ac(VHT40) & BW = 40MHz YES NO YES NO NO YES YES YES NO 5795 159 5775 155 802.11/ac(VHT80) & BW = 80MHz YES NO YES NO NO YES YES YES NO
Freq. (MHz) CH Support IEEE802.11 and BW Active Scan Passive Scan Client Only DFS Mobile Hop spot Wi-Fi Direct Peer to Peer Ad-hoc Radar Detection 5180 36 802.11a/n(HT20) /ac(VHT20) & BW=20MHz YES NO YES NO NO NO NO NO NO 5200 40 5220 44 5240 48 5260 52 NO YES YES YES NO NO NO NO NO 5280 56 5300 60 5320 64 5500 100 NO YES YES YES NO NO NO NO NO 5520 104 5540 108 5560 112 5580 116 5600 120 N/A This device does not support these channel. 5620 124 5640 128 5660 132 NO YES YES YES NO NO NO NO NO 5680 136 5700 140 5190 38 802.11a/n(HT40) /ac(VHT40) & BW=40MHz YES NO YES NO NO NO NO NO NO 5230 46 5270 54 NO YES YES YES NO NO NO NO NO 5310 62 5510 102 NO YES YES YES NO NO NO NO NO 5550 110 5590 118 N/A This device does not support these channel. 5630 126 5670 134 NO YES YES YES NO NO NO NO NO 5210 42 802.11ac(VHT80) & BW=80MHz YES NO YES NO NO NO NO NO NO 5290 58 NO YES YES YES NO NO NO NO NO 5530 106 NO YES YES YES NO NO NO NO NO
Approval Statement CE Statement Hereby, we declare that this device is in compliance with the essential requirements and other relevant provisions of directive 1999/5/EC. FCC Statement To satisfy FCC exterior labeling requirements, the following text must be placed on the exterior of the end product. Contains Transmitter module FCC ID: A3LWEG720B This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: - Reorient or relocate the receiving antenna. - Increase the separation between the equipment and receiver. - Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. - Consult the dealer or an experienced radio/ TV technician for help. This device complies with Part 15 of the FCC`s Rules. Operation is subject to the following two Conditions: 1. This device may not cause harmful interference, and 2. This device must accept any interference received, including interference that may cause undesirable operation. IC Information This device complies with Industry Canada license-exempt RSS standard(s). Operation is subject to the following two conditions: (1) this device may not cause interference, and (2) this device must accept any interference, including interference that may cause undesired operation of the device. Cet appareil est conforme avec Industrie Canada exempts de licence standard RSS (s). L'opération est soumise aux deux conditions suivantes: (1) cet appareil ne peut causer d'interférences, et (2) cet appareil doit accepter toute interférence, y compris les interférences qui peuvent causer un mauvais fonctionnement de l'appareil. The end product must be labeled to display the Industry Canada certification number of the module. Contains transmitter module IC: 649E-WEG720B Le dispositif d'accueil doivent être étiquetés pour afficher le numéro de certification d'Industrie Canada du module. Contient module émetteur IC : 649E-WEG720B User Information This device complies with FCC & IC radiation exposure limits set forth for an uncontrolled environment. This device should be installed and must not be co-located or operating in conjunction with any other antenna or transmitter. This device is intended only for OEM integrators under the following conditions: 1) The antenna must be installed such that 20cm is maintained between the antenna and users. 2) This module may not be co-located with any other transmitters or antennas. As long as 2 conditions above are met, further transmitter test will not be required. However, the OEM integrator is still responsible for testing their end-product for any additional compliance requirements with this module installed. In the event that these conditions cannot be met, then the FCC & IC authorizations are no longer considered valid and the FCC ID cannot be used on the final product. In these circumstances, the OEM integrator will be responsible for re-evaluating the end product including this module and obtaining separate FCC & IC authorizations. Cet appareil est conforme aux limites d'exposition rayonnement de la FCC et IC définies pour un environnement non contrôlé . Cet appareil doit être installé et ne doit pas être co- localisées ou opérant en conjonction avec une autre antenne ou émetteur . Cet appareil est conçu uniquement pour les intégrateurs OEM dans les conditions suivantes : 1 ) L' antenne doit être installée de telle sorte que 20 cm est maintenue entre l'antenne et les utilisateurs . 2 ) Ce module ne peut pas être co-localisé avec d'autres émetteurs ou des antennes . Tant que deux conditions ci-dessus sont remplies , nouvel essai de l'émetteur ne sera pas tenu . Cependant , l'intégrateur OEM est toujours responsable de tester leur produit final pour les exigences de conformité supplémentaires avec ce module installé .Dans le cas où ces conditions ne peuvent être remplies, les autorisations de la FCC et IC ne sont plus considérés comme valides et l'ID FCC ne peuvent pas être utilisés sur le produit final . Dans ces circonstances , l'intégrateur OEM sera chargé de réévaluer le produit final incluant ce module et l'obtention des autorisations de la FCC et IC distincts . Any changed or modifications not expressly approved by the party responsible for compliance could void the user`s authority to operate this equipment. Toute changé ou modifications non expressément approuvés par la partie responsable de la conformité pourraient annuler l'utilisateur `autorité de faire fonctionner cet équipement. This device is restricted to indoor use only within the 5.15 ~ 5.25GHz Band. Cet appareil est restreint à l'utilisation à l'intérieur seulement dans la bande 5.15 ~ 5.25GHz.

Navigation menu