Samsung Electronics Co WEG720B Wi-Fi Transmitter User Manual Operation description WEG720B

Download:
Mirror Download [FCC.gov]
Document ID	2210514
Application ID	w70OT3LCz07mWO56OlNY3g==
Document Description	User Manual
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	5.61kB (70112 bits)
Date Submitted	2014-03-10 00:00:00
Date Available	2014-09-06 00:00:00
Creation Date	2014-03-06 10:09:43
Producing Software	Acrobat Distiller 9.2.0 (Windows)
Document Lastmod	2014-03-07 17:32:24
Document Title	Microsoft Word - Operation description_WEG720B
Document Creator	PScript5.dll Version 5.2.2
Document Author:	Will

Manual For WEG720B
Wi-Fi module(2.4 GHz, 5GHz, a/b/g/n, AC)
- Model name : WEG720B
- Operation Temperature : 0℃ ~ +70℃
- Power : +5V ±5% (+4.75V ~ +5.25V)
1. Introduction
WEG720B is a USB embedded module compliant with IEEE802.11ac standard.
The core chipset is from Broadcom, part number is BCM43526KMLG.
And WEG720B automatically discontinue transmission in case of either absence of information
to transmit or operational failure.
Technical Information for FCC
Freq.
(MHz)
CH
2412
2417
2422
2427
2432
2437
2442
2447
2452
2457
10
2462
11
2422
2427
2432
2437
2442
2447
2452
Freq.
(MHz)
CH
5745
149
5765
153
5785
157
5805
161
5825
165
5755
151
5795
159
5775
155
Support
IEEE802.11 and BW
Active
Scan
Passive
Scan
Client
Only
DFS
Mobile
Hop spot
Wi-Fi
Direct
Peer
to
Peer
Ad-hoc
Radar
Detection
802.11b/g/n(HT20)
BW = 20MHz
YES
NO
YES
NO
NO
YES
YES
YES
NO
YES
NO
YES
NO
NO
YES
YES
YES
NO
YES
NO
YES
NO
NO
YES
YES
YES
NO
Support
IEEE802.11 and BW
Active
Scan
Passive
Scan
Client
Only
DFS
Mobile
Hop spot
Wi-Fi
Direct
Peer
to
Peer
Ad-hoc
Radar
Detection
802.11a/n(HT20)
/ac(VHT20)
BW = 20MHz
YES
NO
YES
NO
NO
YES
YES
YES
NO
802.11n(HT40)
/ac(VHT40)
BW = 40MHz
YES
NO
YES
NO
NO
YES
YES
YES
NO
802.11/ac(VHT80)
BW = 80MHz
YES
NO
YES
NO
NO
YES
YES
YES
NO
802.11n(HT40)
BW = 40MHz
Support
IEEE802.11 and BW
Active
Scan
Passive
Scan
Client
Only
DFS
Mobile
Hop spot
Wi-Fi
Direct
Peer
to
Peer
Ad-hoc
Radar
Detection
YES
NO
YES
NO
NO
NO
NO
NO
NO
NO
YES
YES
YES
NO
NO
NO
NO
NO
NO
YES
YES
YES
NO
NO
NO
NO
NO
Freq.
(MHz)
CH
5180
36
5200
40
5220
44
5240
48
5260
52
5280
56
5300
60
5320
64
5500
100
5520
104
5540
108
5560
112
5580
116
5600
120
5620
124
5640
128
5660
132
5680
136
5700
140
5190
38
5230
46
5270
54
5310
62
5510
102
5550
110
5590
118
5630
126
5670
134
NO
YES
YES
YES
NO
5210
42
YES
NO
YES
NO
NO
5290
58
NO
YES
YES
YES
5530
106
NO
YES
YES
YES
802.11a/n(HT20)
/ac(VHT20)
BW=20MHz
N/A
This device does not support these channel.
802.11a/n(HT40)
/ac(VHT40)
BW=40MHz
NO
YES
YES
YES
NO
NO
NO
NO
NO
YES
NO
YES
NO
NO
NO
NO
NO
NO
NO
YES
YES
YES
NO
NO
NO
NO
NO
NO
YES
YES
YES
NO
NO
NO
NO
NO
NO
NO
NO
NO
NO
NO
NO
NO
NO
NO
NO
NO
NO
NO
NO
NO
NO
NO
N/A
This device does not support these channel.
802.11ac(VHT80)
BW=80MHz
Approval Statement
CE Statement
Hereby, we declare that this device is in compliance with the essential requirements and other relevant provisions of directive
1999/5/EC.
FCC Statement
To satisfy FCC exterior labeling requirements, the following text must be placed on the exterior of the end product.
Contains Transmitter module FCC ID: A3LWEG720B
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules.
These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment
generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause
harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation.
If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment
off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/ TV technician for help.
This device complies with Part 15 of the FCC`s Rules. Operation is subject to the following two Conditions:
1. This device may not cause harmful interference, and
2. This device must accept any interference received, including interference that may cause undesirable operation.
IC Information
This device complies with Industry Canada license-exempt RSS standard(s). Operation is subject to the following two conditions:
(1) this device may not cause interference, and
(2) this device must accept any interference, including interference that may cause undesired operation of the device.
Cet appareil est conforme avec Industrie Canada exempts de licence standard RSS (s). L'opération est soumise aux deux conditions
suivantes:
(1) cet appareil ne peut causer d'interférences, et
(2) cet appareil doit accepter toute interférence, y compris les interférences qui peuvent causer un mauvais fonctionnement de
l'appareil.
The end product must be labeled to display the Industry Canada certification number of the module.
Contains transmitter module IC: 649E-WEG720B
Le dispositif d'accueil doivent être étiquetés pour afficher le numéro de certification d'Industrie Canada du module.
Contient module émetteur IC : 649E-WEG720B
User Information
This device complies with FCC & IC radiation exposure limits set forth for an uncontrolled environment. This device should be installed
and must not be co-located or operating in conjunction with any other antenna or transmitter.
This device is intended only for OEM integrators under the following conditions:
1) The antenna must be installed such that 20cm is maintained between the antenna and users.
2) This module may not be co-located with any other transmitters or antennas.
As long as 2 conditions above are met, further transmitter test will not be required. However, the OEM integrator is still responsible for
testing their end-product for any additional compliance requirements with this module installed. In the event that these conditions
cannot be met, then the FCC & IC authorizations are no longer considered valid and the FCC ID cannot be used on the final product. In
these circumstances, the OEM integrator will be responsible for re-evaluating the end product including this module and obtaining
separate FCC & IC authorizations.
Cet appareil est conforme aux limites d'exposition rayonnement de la FCC et IC définies pour un environnement non contrôlé . Cet
appareil doit être installé et ne doit pas être co- localisées ou opérant en conjonction avec une autre antenne ou émetteur .
Cet appareil est conçu uniquement pour les intégrateurs OEM dans les conditions suivantes :
1 ) L' antenne doit être installée de telle sorte que 20 cm est maintenue entre l'antenne et les utilisateurs .
2 ) Ce module ne peut pas être co-localisé avec d'autres émetteurs ou des antennes .
Tant que deux conditions ci-dessus sont remplies , nouvel essai de l'émetteur ne sera pas tenu . Cependant , l'intégrateur OEM est
toujours responsable de tester leur produit final pour les exigences de conformité supplémentaires avec ce module installé .Dans le
cas où ces conditions ne peuvent être remplies, les autorisations de la FCC et IC ne sont plus considérés comme valides et l'ID FCC
ne peuvent pas être utilisés sur le produit final . Dans ces circonstances , l'intégrateur OEM sera chargé de réévaluer le produit final
incluant ce module et l'obtention des autorisations de la FCC et IC distincts .
Any changed or modifications not expressly approved by the party responsible for compliance could void the user`s authority to operate
this equipment.
Toute changé ou modifications non expressément approuvés par la partie responsable de la conformité pourraient annuler l'utilisateur
`autorité de faire fonctionner cet équipement.
This device is restricted to indoor use only within the 5.15 ~ 5.25GHz Band.
Cet appareil est restreint à l'utilisation à l'intérieur seulement dans la bande 5.15 ~ 5.25GHz.

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.6
Linearized                      : No
Author                          : Will
Create Date                     : 2014:03:06 10:09:43+09:00
Modify Date                     : 2014:03:07 17:32:24+09:00
Has XFA                         : No
XMP Toolkit                     : Adobe XMP Core 4.2.1-c043 52.372728, 2009/01/18-15:08:04
Format                          : application/pdf
Title                           : Microsoft Word - Operation description_WEG720B
Creator                         : Will
Creator Tool                    : PScript5.dll Version 5.2.2
Metadata Date                   : 2014:03:07 17:32:24+09:00
Producer                        : Acrobat Distiller 9.2.0 (Windows)
Document ID                     : uuid:20238c18-2a21-4dc1-91fa-8d96d0fd833e
Instance ID                     : uuid:dbb6db55-c82a-4855-a093-35046f817671
Page Count                      : 4

EXIF Metadata provided by EXIF.tools