Samsung Electronics Co XE700T1A Nike Tablet User Manual Nike Tab eng indb
Samsung Electronics Co Ltd Nike Tablet Nike Tab eng indb
Contents
- 1. User Manual P1
- 2. User Manual P2
User Manual P2
User Guide Getting Started Using the Computer Settings and Upgrade Backup / Restore Appendix Contents Start Wireless Network (Optional) A wireless network (Wireless LAN) environment is a network environment that enables communicating between multiple computers at home or a small-size office through wireless LAN devices. • The descriptions below are for computer models with a Wireless LAN card or device. A Wireless LAN device is optional. The pictures in this manual may differ from the actual product depending on your wireless LAN device model. • If the wireless LAN is turned off, select Easy Settings > Wireless Network and set it to ON. Chapter 2. Using the computer 63 What is an Access Point (AP)? An AP is a network device that bridges wired and wireless LANs, and corresponds to a wireless hub in a wired network. Connect the computer with the wireless LAN function to the AP to use to the network connection. Wireless Network (Optional) Chapter 2. Using the computer Connecting to a Wireless LAN If there is an AP, you can connect to the Internet via the AP using the Wireless LAN connection method provided by Windows. Click Connect. If a network key is set for the AP, enter the network key and then click Connect. For the network key, please ask your network administrator. These descriptions are written based on Windows 7, the latest operating system. Therefore, some descriptions and figures may differ from your operating system. But as the usage is similar to other Windows operating systems, you can use these descriptions for reference. If you click the Network Connections icon in the system tray, a list of available APs appears. If you select an AP to connect to, the Connect button appears. AP List 64 When Connected to the AP is displayed, click the Close button. You can access the network. Wireless Network (Optional) Chapter 2. Using the computer Connecting to a Wireless LAN through Easy Settings (Optional) You can access a wireless LAN using Easy Settings. These descriptions are for Windows 7 and for supported models only. Launch the Easy Settings. Configure the Wireless Network and set the Wi-Fi device to ON. If this option is set to ON, the Wi-Fi function will run. AP List 65 Normal Wireless Network Status If the wireless LAN icon is displayed in the system tray of the Taskbar, it indicates that the computer is connected to the Internet properly (see below). Wireless Network (Optional) Abnormal Wireless Network Status When the wireless LAN is not connected If the wireless LAN icon is displayed with an “X” in the system tray of the Taskbar, it indicates that the wireless LAN device is turned off or that there are no available APs. Or the wireless LAN is disconnected. Chapter 2. Using the computer 66 When APs are found but your computer is not connected to the Internet This is the case when an AP with a weak signal has been set to a high priority. Connect to an AP with a strong signal by clicking it. The currently connected AP. The signal strength is low. An AP with a strong signal strength When you are not connected to the Internet This is indicated by the wireless LAN icon in the system tray of the Taskbar. In this case, you have to check the IP address settings. Please contact your network administrator and reconfigure the IP address. Click Using the Slate PC Dock (Optional) The Slate PC Dock supports various notebook computers so that compatible peripherals can be connected to the computer. You have to purchase the Slate PC Dock additionally. ► Rear Chapter 2. Using the computer USB Port Headphone Jack 67 You can connect USB devices to the USB port such as a keyboard/mouse, digital camera, etc. A jack used to connect the headphones. Connecting and using a Headphone Jack Using the Headphone jack DC Jack Wired LAN Port A jack to connect the AC adapter that supplies power to the computer. Connect the Ethernet cable to this port. You can connect an HDMI cable to this port. Using this port, you can enjoy digital video Digital Video/ and audio on the TV. Audio Port You cannot use both this port and the (HDMI) Micro HDMI port on the computer at the (Optional) same time. To use the Micro HDMI port on the computer, separate the Slate PC Dock. Right-click over the Volume Control icon in the notification area at the bottom right of the Desktop and select Playback Devices. (Alternatively, click the Control Panel > Hardware and Sound > Sound > Playback tab.) Select the Speakers(USB audio), click Set Default and click OK. Restrictions When the Slate PC Dock is connected to the computer, you cannot use the microphone (USB audio) or the Line-In (USB audio) item of the recording device. Using the Slate PC Dock (Optional) Installing/Removing Chapter 2. Using the computer Align the computer connector of the Slate PC Dock and the Slate PC Dock port at the bottom of the computer and connect them. Before installing a computer to the docking station, make sure to disconnect all the cables connected to the computer. Although you can separate the computer from the Slate PC Dock regardless of whether the computer is on or off, separating it when the computer is off is recommended. Installing the computer You can only use the Slate PC Dock with a Samsung computer that supports this feature. Insert your finger into the groove on the side of the Slate PC Dock to open the top cover of the Slate PC Dock. Computer Connector 68 Using the Slate PC Dock (Optional) Separating the Computer Turn the computer off. Pull the computer upward by hand while holding the Slate PC Dock firmly with the other hand. Chapter 2. Using the computer 69 Chapter 3. Settings and Upgrade LCD Brightness Control 71 Easy Settings (Optional) 73 BIOS Setup 74 Changing the Boot Priority 76 Battery 77 LCD Brightness Control Using the Easy Settings, you can control the LCD brightness. The screen brightness is automatically set to the brightest level when AC power is connected and the brightness is automatically set dimmer when the computer runs on battery power to extend the battery use time. Launch the Easy Settings Click Display > Screen Brightness and set the brightness level. Chapter 3. Settings and Upgrade 71 • Maintaining the changed LCD brightness even after turning the computer on again To maintain the LCD brightness set by using the brightness control keys or through the Power Options, follow the procedures below. ► For Windows 7 1. Click Control Panel > Hardware and Sound > Power Options. 2. Click Change the settings of the currently configured mode. 3. Adjust the display brightness adjustment menu bar and click the Save the changes button. • Saving battery power consumption Decreases the LCD brightness when the computer is running on battery power to save battery power consumption. LCD Brightness Control • LCD bad pixels principle of computer Samsung observes the specifications regarding strict quality and reliability of LCD. But in spite of that, it is inevitable that there might be a small number of bad pixels. A large number of bad pixels can cause problems in appearance, but a small number of pixels doesn’t affect the computer performance. Therefore Samsung observes and manages the following dot principles: - Bright dot : 2 or less - Black dot : 4 or less - Combination of Bright and Dark : 4 or less Instructions for Cleaning the LCD Clean the LCD panel with a soft cloth lightly moistened with computer cleansing detergent moving in one direction. Cleaning the LCD panel with excessive force can damage the LCD. Chapter 3. Settings and Upgrade 72 Easy Settings (Optional) Easy Settings is the integrated Samsung software control program that allows you to confi gure various settings. • This description is for models that support the function and are running on Windows 7. • The screen figures and terms may differ depending on the model. • Depending on the program version, some functions may not be provided or different functions may be provided. Launch the Easy Settings. You can configure a function by selecting an item in the System Controller. Chapter 3. Settings and Upgrade 73 Functions Touch calibration General The Touch Logon setting and the screen text font size setting. Fast Start setting, silent mode and user account. Power Management You can configure the Power Plan (highperformance, power-saving, Samsung optimal mode), the power-saving settings and the display settings. Wireless Network You can configure whether to use the Airplane mode and Wi-Fi options. Wired Network You can select automatic or fixed IP settings. Display You can configure external display devices, and the screen brightness/color. Desktop Background / Screen Saver You can configure the Desktop background and the screen saver. SoundAlive You can configure the sound mode (Music, Movie, Speech, Silver Mode etc.). BIOS Setup The BIOS Setup enables you to configure your computer hardware according to your needs. • Use the BIOS setup to define a boot password, change the booting priority, or add a new device. • Since incorrect settings may cause your system to malfunction or crash, take care when configuring the BIOS. • The functions of the BIOS setup are subject to change for product function enhancement purposes. • The BIOS Setup menus and items may differ depending on your computer model. Chapter 3. Settings and Upgrade 74 Entering the BIOS Setup Turn the computer on and press and hold the Home button for 4 seconds before the screen is displayed on the touch screen. After a moment, the BIOS setup screen appears. The items in the BIOS setup may differ depending on the product. BIOS Setup Chapter 3. Settings and Upgrade The BIOS Setup Screen The BIOS Setup menus and items may differ depending on your computer model. Setup Menu Description SysInfo This is a description about the basic specifications of the computer. Advanced SysInfo Aptio Setup Utility - Copyright (C) 201x American Megetrends, Inc. Advanced Boot Exit System Time System Date [09:07:06] [Fri 07/08/2011] SATA Port 1 SAMSUNG xxxxxxxxxxxx-00000 CUU CPU CPU CPU Intel(R) Core(TM) ix-xxxxM CPU x.xx GHz Supported Vendor Type Speed VT (VT-x) Total Memory xxxx MB BIOS Version MICOM Version FWx.Vxxx.xxxxxxxx.SSH xxFW.Vxxx To modify the time, press 'Enter' key. And then use 'Tab' to switch between Time elements. ,+[R,L&V,D/V,U]: Select Screen )*[V,U/V,D]: Select Item Enter [R,L]: Select >> Sub-Menu F5/F6: Change Help F1 : General Help F3 : Previous Values F9 : Optimized Defaults F10 : Save and Reset ESC [Home]: Exit R,L = Rotation Lock V,U/D = Volume Up/Down Home = Home Button SAMSUNG Electronics BIOS Team ux.x Setup Menu Set the Time. cx.xx.xxxx Help Help for the selected item appears automatically. Setup Items 75 Using this menu, you can configure the major chipsets and additional functions. Boot This menu enables you to configure peripherals and booting related settings such as the boot priority. Exit Used to exit the Setup either saving the changes or not. Buttons for BIOS Setup Volume Control buttons Lock Screen Rotation + Volume Control button combination Press the Volume Control buttons to move the focus upward or downward. Press the Lock Screen Rotation button and the Volume Control button simultaneously to move the focus to the left or right. Home button Press this button to return to a higher-level menu or to move to the Exit menu. Lock Screen Rotation button Press this button to select an item or enter the sub menu. Changing the Boot Priority The computer is configured so that it boots from the SATA HDD with priority, by default. Chapter 3. Settings and Upgrade The following describes how to change the boot priority so that the computer boots from the USB CD drive with priority. 76 Press the Volume Control button to move the focus to the USB CD item and press the Lock Screen Rotation button to move the USB CD item to the top. Set Boot Priority 1. 2. 3. 4. 5. 6. The screen images and terms may differ from actual product depending on the computer model and driver version. Select the Boot menu in the BIOS Setup. In the Boot Device Priority field, press the Lock Screen Rotation button. ඖ Boot Device Priority ඖ TPM Configuration PXE OPROM [Disabled] Smart Battery Calibration SATA HDD USB KEY USB CD USB FDD USB HDD NETWORK XXXXX N/A XXXXXXXX N/A N/A N/A Press the Home button to return to a higher-level menu. Move to the Exit menu and select Save Changes and Reset. The computer will be restarted. Now, the boot priority has been changed so that the computer boots from the USB CD drive with priority. Battery Please refer to the following instructions when running the computer on battery power without connecting the AC power. This computer is equipped with an internal battery. Precautions • Users cannot remove or replace the internal battery. Chapter 3. Settings and Upgrade 77 • Before using the computer for the first time, make sure to connect the AC adapter and charge the battery completely. • The images used for the illustration are of a representative model, therefore the images may differ from the the actual product. • To remove or replace the battery, use an authorized service center in order to protect the product and users. You will be charged for this service. • Use only chargers specified in the User Manual. • Never heat the battery pack, put it near or in a fire or use at a temperature higher than 60°C, as this may cause fire. • Please refer to the system operation environment of this manual and operate and store the battery at room temperature. The location of the internal battery Battery Charging the Battery An internal battery is embedded. Connect the AC adapter to the power input jack of the computer. The battery will start charging. Chapter 3. Settings and Upgrade 78 Measuring the Remaining Battery Charge You can view the battery charge status by completing the following procedures. Confirming the battery charge in the Taskbar Disconnect the AC adapter and move the mouse cursor over the battery icon in the system tray of the Taskbar to confirm the remaining battery charge. Battery Usage Time Information A battery is an expendable supply, so when using it over a long time, the capacity/battery life is shortened. If the battery life is reduced to under half of its initial time, we recommend purchasing a new battery. When not using the battery for a long time, store the battery after charging it to 30-40% of its capacity. This extends the battery life time. Battery Chapter 3. Settings and Upgrade Extending the Battery Usage Time Samsung Optimized Decreasing the LCD Brightness If you dim the screen brightness in the Easy Settings > Display > Screen Brightness, you can extend the battery use time. Click Start > Control Panel > Hardware and Sound > Power Options. Alternatively, right-click the power measuring device icon in the notification area of the taskbar and select Power Options. This mode is appropriate for normal conditions. It maximizes the system performance when the computer is running on AC power while maximizing the battery usage time when the computer is running on battery power. • What is the Power-saving Effect? Using the power management program 79 If the following screen appears, select one of the modes. This product displays the battery life in each power mode. The higher the power saving effect increases, the longer the graph bar is displayed. • When Using Games or Multimedia The system may not operate properly in maximum battery mode. It is recommended to connect the AC adapter to the system or to use the system in general mode. • Usage Mode of Samsung Battery Manager - The maximum battery mode optimizes the system operation speed to increase the battery run time, so the program execution time may get longer. - If you change the power settings, the properties in Power Options window will also be changed. Samsung Optimized Battery Chapter 3. Settings and Upgrade 80 Extending the Battery Life (Optional) Using the Battery Calibration Function In the Easy Settings program, click System Controller > General and set the Battery Life Extender to ON or OFF. When charging/discharging the battery repeatedly for a short time only, the battery usage time may be reduced by the difference between the actual battery charge and the remaining charge display. OFF This mode maintains 100% of the battery charge when using the computer on AC power. In this case, although the battery use time increases, the battery life is reduced. ON This mode maintains 80% of the battery charge when using the computer on AC power. In this case, although the battery use time decreases, the battery life is extended. Alternatively, to extend the battery life Press the F2 key when the Samsung logo appears in the booting sequence to enter the BIOS Setup, select Advanced > Battery Life Cycle Extension, and set it to Enable. Then you can use the battery life cycle extension mode. In this case, the actual battery charge and the remaining charge display will be the same by discharging the battery completely using the Battery Calibration function, and then recharging it again. The screen images and terms may differ from actual product depending on the computer model and driver version. Disconnect the AC power adapter after turning off the computer. Turn the computer on again and press and hold the Home button for 4 seconds to enter the BIOS Setup. Battery Chapter 3. Settings and Upgrade Move to the Boot > Smart Battery Calibration item using the direction keys and press. ඖ Boot Device Priority ඖ TPM Configuration PXE OPROM [Disabled] Smart Battery Calibration When the Yes item of the Battery Calibration Confirmation window is selected, press the Lock Screen Rotation button. The Battery Calibration process will proceed. To stop the process, press the Home button. This operation requires 3~5 hours depending on the battery capacity and the remaining battery charge. 81 Chapter 4. Backup / Restore Samsung Recovery Solution (Optional) 83 Samsung Recovery Solution (Optional) Samsung Recovery Solution is a program that enables restoring or backing up the hard disk drive for when a problem occurs with the computer. If the computer fails to boot up, you can restore the computer by pressing the F4 key in the booting screen. • To use the hot keys, you have to use a keyboard. Please connect a keyboard (optional). • Samsung Recovery Solution may not be provided or the version may differ depending on the model. In addition, some functions may not be provided or may differ depending on the version. For more information on using Samsung Recovery Solution, please refer to the online help of the program. Chapter 4. Backup / Restore Samsung Recovery Solution Functions Backup/Restore Functions Backup Function Backs up drive C or required folders and files. • Complete Backup Backs up drive C. A problem occurs • The System Software function may not be provided depending on the program version. • Data Backup Backs up important folders and files. Restore Function Restores major Windows files, drive C, or folders and files to the previous state. • Basic Restore • The screen images in this document may differ from actual product. • If your computer does not have an internal ODD, you need an external ODD connected to your computer to use the Backup Function or Restore Function using DVDs. 83 Restores only major Windows files in a short time. • Complete Restore VIRUS Restores drive C to the previous, normal state. • Data Restore Restores important files or folders to the previously backed up state. Samsung Recovery Solution (Optional) System Software Functions Samsung Recovery Solution provides system software so that you can reinstall or copy the device drivers and system software necessary for normal operations onto a separate storage device. Chapter 4. Backup / Restore Not only can you use Samsung Recovery Solution when Windows is running, but also when you are unable to boot up into Windows. Let’s learn how to use Samsung Recovery Solution. If you turn your computer on for the first time, the Initial Status Backup function is performed after registering Windows. This function saves an image of the Initial Status of the C drive to a secure location so that users can restore the computer to the Initial Status using the Complete Restore function. An Initial Status Backup is only performed once immediately after the computer is purchased. After the computer has been restarted, the Partition Setup screen appears. The Partition Setup function is only available when the computer is turned on for the first time and will not be available afterwards. Once you have completed the partitioning, it cannot be resized. Partition the disk carefully. Optional functions such as Initial State Image, Initial Status Backup, and Partitioning are only available in some models. Partition Setup & Initial Status Backup If you turn the power on for the first time, the Register Windows screen appears. If you register Windows according to the instructions on the screen, the computer will be restarted. To resize the C and D drives, adjust the partition size using the slide bar and the click Next. Restore Function If the image of the initial state is saved on a DVD or removable storage device, connect the DVD drive or removable storage device to the computer before using the function. 84 The Initial Status Backup screen appears. To continue the Initial Status Backup, click Restart Now. The computer will restart. The Initial Status Backup is performed to backup the initial status of the C drive to a secure location. This backup image is used for the Complete Restore function that restores your computer to the initial status. When the Initial Status Backup is complete, restart Windows. Samsung Recovery Solution (Optional) Restoring the computer Restore is a function that enables restoring the computer to a saved point when the computer was purchased or a user-saved point. Chapter 4. Backup / Restore If the initial menu screen appears, click Restore. The Restore function provides the Basic Restore and Complete Restore options. – When Windows is running: Click Samsung Recovery Solution. – When Windows does not start: Turn the computer on and press the F4 key when the boot screen (SAMSUNG logo) appears. After a moment, the computer boots up in Restoration mode and the Samsung Recovery Solution screen appears. In touch-screen models, the touch screen function does not work in recovery mode. In this case, please use the touchpad, mouse or keyboard. If you click Select by Symptom, the Select by Symptom menu appears. If you select a symptom, a recommended restoration option will blink. Click the restoration option to continue. 85 Samsung Recovery Solution (Optional) Chapter 4. Backup / Restore Select either Basic Restore or Complete Restore from the Restore menu. 86 In the Advanced menu, you can change the size of the hard drive partitions (e.g. C: and D:). To restore the computer to the initial state, click Computer Initial State and perform the restoration process according to the instructions that appear on the screen. • Make sure to backup your data in advance, as all data will be deleted after the partition size is changed. • The Advanced menu is only activated when the computer boots up in the restoration area. (by pressing the F4 key during the booting sequence.) Since a Complete Restore deletes all user data as well as additionally installed programs, please backup your important data first using the Data Backup function, before running Complete Restore. Run Complete Restore if the computer does not work even after Basic Restore has been completed. The computer boots up into restoration mode and the restoration progress message appears. If you click OK, the restoration begins. The restoration may take some time, please wait for a moment. When the ‘Restart the System’ message appears after the restoration is complete, click OK to restart the system. Make sure that the power cord is connected while the restoration is in process. The first time the computer boots up after a Complete Restore has been performed, the speed of the boot process may be slowed down due to the system optimization process. At this time, do not shut the computer down by force. Samsung Recovery Solution (Optional) Chapter 4. Backup / Restore 87 Complete Backup/Restore A Complete Backup saves the complete image of the C drive onto another drive or DVD. A Complete Restore restores the image file saved by the Complete Backup onto the C drive. Complete Backup If you perform the Complete Backup function onto a DVD or removable storage device, you can restore your computer even when a problem occurs with the hard disk or when the restoration area is removed. To create a backup, a removable storage device with at least 15 GB of free space is required. Click Backup in the start screen of the Samsung Recovery Solution. Enter a description of the current status of the computer and click Next. After connecting a DVD drive or removable storage device, you can specify the DVD drive or removable storage device as the Save Path. Select Drive D. Select the DVD drive. When the option selection item appears, select an option and click Next. The LiveImaging and System Software Backup functions are supported as options for the Complete Backup operation. • LiveImaging: Performs the Complete Backup operation while Windows is running. The backup operation using LiveImaging may slow down if the hard disk drive is accessed frequently by other applications. • System Software Backup: This function backs up the system software on to the DVD after the completion of the Complete Backup operation. Samsung Recovery Solution (Optional) When the system restarts in Restoration Mode, the Complete Backup operation begins. Continue with the backup by following the instructions. • Samsung Recovery Solution supports the DVD+R, DVD-R, DVD+RW and DVD-RW formats. • If the LiveImaging option has been selected, the Complete Backup operation begins without the computer being restarted. Continue with the Complete Backup operation by following the instructions. Chapter 4. Backup / Restore 88 When the ‘Restart the System’ message appears after the backup is complete, click OK to restart the system. If the LiveImaging option has been selected, the computer is not restarted. Samsung Recovery Solution (Optional) Complete Restore Chapter 4. Backup / Restore – When backing up onto DVD 89 Select a Complete Backup restoration point in the restoration point selection screen and click the Next button. The system is restarted. Turn the computer on and insert the backup DVD into the DVD drive. If there are multiple backup DVDs, insert the first DVD. – When backing up to a removable storage device Connect the removable storage device. – When backing up to another drive Proceed to Step 2. When the Samsung Recovery Solution start screen appears, click Restore and then click Complete Restore. The restoration progress message appears after the computer boots up in restoration mode. If you click OK, the restoration begins. If multiple DVDs have been used for a Complete Backup, whenever burning a DVD is completed, the “Insert the next DVD” message will appear. When the ‘Restart the System’ message appears after the restoration is complete, click OK to restart the system. The Complete Restore has been completed. Samsung Recovery Solution (Optional) Chapter 4. Backup / Restore 90 Data Backup/Restore The Data Backup function enables you to backup specific files and folders to another drive, DVD or removable storage device. Data Restore enables you to restore data using the data saved by a Data Backup when data is lost. This guide describes the Backup and Restore procedures on the basis of backing up and restoring by using DVD. Data Backup When the Samsung Recovery Solution start screen appears, click Backup and then click Data Backup. Select Drive D. If you have specified a hard disk drive or a removable disk as the Save Path, the SamsungRecovery\SamsungData folder is created on the corresponding drive (e.g. D:\) and the data is saved to the folder. Take care to not delete the folder by mistake or on purpose. In the data selection screen, select either Basic Selection or Select from all, select a folder or file to be backed up, and then click the Next button. Enter a description for the backup in the Description field so that you can easily recognize it later and specify the Save Path. Select the DVD drive. If your computer has a DVD-Writer, you can specify the DVD drive as the Save Path. If you click the Next button, the Data Backup begins. If you have selected the DVD drive as the Save Path, the “Insert a blank DVD” message appears. Insert a blank DVD and click the OK button. The “Backup is completed” message appears. Samsung Recovery Solution (Optional) Data Restore – When backing up onto DVD Turn the computer on and insert the backup DVD into the DVD drive. – When backing up to a removable storage device Connect the removable storage device. – When backing up to another drive Proceed to Step 2. When the initial menu screen appears, click Restore and then click Data Restore. Select a backup item to be restored in the backup list and click the Next button. Select a folder for the restoration and click the Next button. Data Restore begins. When Data Restore is completed, check if the data has been restored to the specified folder. Chapter 4. Backup / Restore 91 Samsung Recovery Solution (Optional) System Software Function The System Software function is a function that enables you to reinstall device drivers and System Software Programs or back up those programs. Chapter 4. Backup / Restore 92 Installing System Software When the initial menu screen appears, click System Software > System Software Installation. Move to the Easy Software Manager. After the installation is complete, the computer will restart. The system software function is supported by Samsung Recovery Solution version 4 or later. Therefore, the function may not be supported depending on the version. The System Software Installation Function only works in Microsoft Windows. Using the Easy Software Manager, you can install device drivers and applications. Samsung Recovery Solution (Optional) Chapter 4. Backup / Restore System Software Backup When the initial menu screen appears, click System Software > System Software Backup. Specify the Save Path. 93 If you have specified a hard disk drive or a removable disk as the Save Path, the SamsungSoftware folder is created on the corresponding drive (e.g. D:\) and the system software programs are saved to that folder. Take care to not delete the folder. If your computer has a DVD-Writer, you can specify the DVD drive as the Save Path. If you click the Next button, the Software Backup begins. If you have selected the DVD drive as the Save Path, the “Insert a blank DVD” message appears. Insert a blank DVD and click the OK button. After the backup, the System Software Backup is completed message appears. • If you want to install the System Software Programs backed up on the drive, run the SecSWMgrGuide.exe file in the SystemSoftware folder. • When installing System Software Programs from the backed-up DVD, insert the DVD and follow the System Software Installation directions. • To delete Samsung Recovery Solution, refer to the Help section of the program. Select Drive D. Select the DVD drive. Samsung Recovery Solution (Optional) Chapter 4. Backup / Restore 94 Recovery Solution Representation (Optional) What is a Recovery Area? •• Samsung computers have an additional partition to recover computers or save backup files. (Only for models with the Samsung Recovery Solution.) This partition is called a Recovery Area and it includes a recovery image that comprises of the OS and application programs. •• You can either double-click the Samsung Recovery Solution icon on the desktop or press F4 while booting the computer to enter the Recovery Area. Then you can back up the present computer state or recover the computer from backed up images. •• For deleting the Recovery Area, you need to use an additional Recovery Area Removal Tool. After deleting the recovery area, you can use the newly created partition for other uses, such as for saving personal data. Be careful that once the recovery area is deleted, the Samsung Recovery Solutions will not work anymore. The capacity representation of the hard disk drive(HDD) in Windows is different from the product specifications. •• The capacity of the storage device (HDD) of the manufacturer is calculated assuming that 1KB=1,000 Bytes. However, the operating system (Windows) calculates the storage device capacity assuming that 1KB=1,024 Bytes, and therefore the capacity representation of the HDD in Windows is smaller than the actual capacity. This is due to the difference in capacity calculation and does not mean the installed HDD is different from the product specifications. •• The capacity representation in Windows may be smaller than the actual capacity because some programs occupy a certain area of the HDD outside of Windows. •• For models with Samsung Recovery Solution, the HDD capacity representation in Windows may be smaller than the actual capacity because Samsung Recovery Solution uses a hidden area of about 5~20GB of the HDD to save the recovery image, and that hidden area is not counted towards the total size available to Windows. The size of Samsung Recovery Solution varies by models because of the different size of applied programs. Chapter 5. Appendix Important Safety Information 96 Replacement Parts and Accessories 98 Regulatory Compliance Statements 100 WEEE Symbol Information 115 Product Specifications 116 Glossary 118 Index 122 Important Safety Information Safety Instructions Your system is designed and tested to meet the latest standards for safety of information technology equipment. However, to ensure safe use of this product, it is important that the safety instructions marked on the product and in the documentation are followed. Always follow these instructions to help guard against personal injury and damage to your system. Setting Up your System •• Read and follow all instructions marked on the product and in the documentation before you operate your system. Retain all safety and operating instructions for future use. •• Do not use this product near water or a heat source such as a radiator. •• Set up the system on a stable work surface. •• The product should be operated only with the type of power source indicated on the rating label. •• Ensure that the electrical outlet you are using to power your equipment is easily accessible in case of fire or short circuit. Chapter 5 Appendix 96 •• If your computer has a voltage selector switch, make sure that the switch is in the proper position for your area. •• Openings in the computer case are provided for ventilation. Do not block or cover these openings. Make sure you provide adequate space, at least 6 inches (15 cm), around the system for ventilation when you set up your work area. Never insert objects of any kind into the computer ventilation openings. •• Ensure that the fan vents on the bottom of the casing are clear at all times. Do not place the computer on a soft surface, doing so will block the bottom vents. •• If you use an extension cord with this system, make sure that the total power rating on the products plugged into the extension cord does not exceed the extension cord power rating. •• For Notebooks with glossy display bezels the user should consider the placement of the Notebook as the bezel may cause disturbing reflections from surrounding light and bright surfaces. Important Safety Information Chapter 5 Appendix Care During Use The Instruction On Safety Operation of NotePC •• Do not walk on the power cord or allow anything to rest on it. 1. When installing and operating devices please refer to safety requirements in the user guide. •• Do not spill anything on the system. The best way to avoid spills is to not eat or drink near your system. •• Some products have a replaceable CMOS battery on the system board. There is a danger of explosion if the CMOS battery is replaced incorrectly. Replace the battery with the same or equivalent type recommended by the manufacturer. Dispose of batteries according to the manufacturers instructions. If the CMOS battery requires replacement insure that a qualified technician performs the task. •• When the computer is turned off, a small amount of electrical current still flows through the computer. To avoid electrical shock, always unplug all power cables, remove the battery and modem cables from the wall outlets before cleaning the system. •• Unplug the system from the wall outlet and refer servicing to qualified personnel if: – The power cord or plug is damaged. – Liquid has been spilled into the system. – The system does not operate properly when the operating instructions are followed. – The system was dropped or the casing is damaged. – The system performance changes. 97 2. Devices can be used only with the equipment specified in the technical specifications of the devices. 3. If any smell of burning or smoke is detected from the computer the unit should be switched off and battery removed. The unit should be checked by a qualified technician before reuse. 4. Service and repair of devices should be carried out by authorized service centers. 5. Do not allow your portable computer to operate with the base resting directly on exposed skin for extended periods of time. The surface temperature of the base will rise during normal operation (particularly when AC Power is present). Allowing sustained contact with exposed skin can cause discomfort or eventually a burn. Replacement Parts and Accessories Use only replacement parts and accessories recommended by manufacturer. To reduce the risk of fire, use only No. 26 AWG or larger telecommunications line cord. Do not use this product in areas classified as hazardous. Such areas include patient care areas of medical and dental facilities, oxygen rich environments, or industrial areas. Chapter 5 Appendix 98 Laser Safety All systems equipped with CD or DVD drives comply with the appropriate safety standards, including IEC 60825-1. The laser devices in these components are classified as “Class 1 Laser Products” under a US Department of Health and Human Services (DHHS) Radiation Performance Standard. Should the unit ever need servicing, contact an authorized service location. • Laser Safety Note: Battery Disposal Do not put rechargeable batteries or products powered by non-removable rechargeable batteries in the garbage. Use of controls or adjustments or performance of procedures other than those specified in this manual may result in hazardous radiation exposure. To prevent exposure to laser beams, do not try to open the enclosure of a CD or DVD drive. • Class 1M laser radiation when operating part is open. Contact the Samsung Helpline for information on how to dispose of batteries that you cannot use or recharge any longer. Follow all local regulations when disposing of old batteries. THERE IS A RISK OF EXPLOSION IF BATTERY IS REPLACED BY AN INCORRECT TYPE. DISPOSE OF USED BATTERIES ACCORDING TO THE INSTRUCTIONS. Do not view directly with optical instruments. • Class 3B invisible laser radiation when open. Avoid exposure to the beam. Replacement Parts and Accessories Connect and Disconnect the AC adapter The socket-outlet shall be installed near the equipment and shall be easily accessible. Do not unplug the power cord by pulling the cable only. Power Cord Requirements The power cord set (wall plug, cable and AC adapter plug) you received with your computer meets the requirements for use in the country where you purchased your equipment. Power cord sets for use in other countries must meet the requirements of the country where you use the computer. For more information on power cord set requirements, contact your authorized dealer, reseller, or service provider. Chapter 5 Appendix 99 General Requirements The requirements listed below are applicable to all countries: •• All power cord sets must be approved by an acceptable accredited agency responsible for evaluation in the country where the power cord set will be used. •• The power cord set must have a minimum current capacity of 7 A and a nominal voltage rating of 125 or 250 volts AC, as required by each country’s power system. (USA ONLY) •• The appliance coupler must meet the mechanical configuration of an EN 60 320/IEC 320 Standard Sheet C7 (or C5) connector, for mating with appliance inlet on the computer. Regulatory Compliance Statements Wireless Guidance (If fitted with 2.4G band or 5G band) Low power, Radio LAN type devices (radio frequency (RF) wireless communication devices), operating in the 2.4GHz/5GHz Band, may be present (embedded) in your notebook system. The following section is a general overview of considerations while operating a wireless device. Additional limitations, cautions, and concerns for specific countries are listed in the specific country sections (or country group sections). The wireless devices in your system are only qualified for use in the countries identified by the Radio Approval Marks on the system rating label. If the country you will be using the wireless device in, is not listed, please contact your local Radio Approval agency for requirements. Wireless devices are closely regulated and use may not be allowed. The RF field strength of the wireless device or devices that may be embedded in your notebook are well below all international RF exposure limits as known at this time. Because the wireless devices (which may be embedded into your notebook) emit less energy than is allowed in radio frequency safety standards and recommendations, manufacturer believes these devices are safe for use. Regardless of the power levels, care should be taken to minimize human contact during normal operation. Some circumstances require restrictions on wireless devices. Examples of common restrictions are listed on the next page: Chapter 5 Appendix 100 • Radio frequency wireless communication can interfere with equipment on commercial aircraft. Current aviation regulations require wireless devices to be turned off while traveling in an airplane. 802.11ABGN (also known as wireless Ethernet or Wifi) and Bluetooth communication devices are examples of devices that provide wireless communication. • In environments where the risk of interference to other devices or services is harmful or perceived as harmful, the option to use a wireless device may be restricted or eliminated. Airports, Hospitals, and Oxygen or flammable gas laden atmospheres are limited examples where use of wireless devices may be restricted or eliminated. When in environments where you are uncertain of the sanction to use wireless devices, ask the applicable authority for authorization prior to use or turning on the wireless device. • Every country has different restrictions on the use of wireless devices. Since your system is equipped with a wireless device, when traveling between countries with your system, check with the local Radio Approval authorities prior to any move or trip for any restrictions on the use of a wireless device in the destination country. • If your system came equipped with an internal embedded wireless device, do not operate the wireless device unless all covers and shields are in place and the system is fully assembled. Regulatory Compliance Statements • Wireless devices are not user serviceable. Do not modify them in any way. Modification to a wireless device will void the authorization to use it. Please contact manufacturer for service. • Only use drivers approved for the country in which the device will be used. See the manufacturer System Restoration Kit, or contact manufacturer Technical Support for additional information. Chapter 5 Appendix 101 United States of America USA and Canada Safety Requirements and Notices Do not touch or move antenna while the unit is transmitting or receiving. Do not hold any component containing the radio such that the antenna is very close or touching any exposed parts of the body, especially the face or eyes, while transmitting. Do not operate the radio or attempt to transmit data unless the antenna is connected; if not, the radio may be damaged. Use in specific environments: The use of wireless devices in hazardous locations is limited by the constraints posed by the safety directors of such environments. The use of wireless devices on airplanes is governed by the Federal Aviation Administration (FAA). The use of wireless devices in hospitals is restricted to the limits set forth by each hospital. Explosive Device Proximity Warning Do not operate a portable transmitter (such as a wireless network device) near unshielded blasting caps or in an explosive environment unless the device has been modified to be qualified for such use. Regulatory Compliance Statements Use On Aircraft Caution Regulations of the FCC and FAA prohibit airborne operation of radio-frequency wireless devices because their signals could interfere with critical aircraft instruments. Other Wireless Devices Safety Notices for Other Devices in the Wireless Network: Refer to the documentation supplied with wireless Ethernet adapters or other devices in the wireless network. The Part 15 radio device operates on a non-interference basis with other devices operating at this frequency. Any changes or modification to said product not expressly approved by Intel could void the user’s authority to operate this device. Chapter 5 Appendix 102 Unintentional Emitter per FCC Part 15 This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:(1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. This equipment has been tested and found to comply with the limits for a Class B digital device pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy. If not installed and used in accordance with the instructions, it may cause harmful interference. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: •• Reorient or relocate the receiving antenna. •• Increase the separation between the equipment and receiver. •• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. •• Consult the dealer or an experienced radio/TV technician for help. Regulatory Compliance Statements If necessary, the user should consult the dealer or an experienced radio/television technician for additional suggestions. The user may find the following booklet helpful: “Something About Interference.” This is available at FCC local regional offices. Our company is not responsible for any radio or television interference caused by unauthorized modifications of this equipment or the substitution or attachment of connecting cables and equipment other than those specified by our company. The correction will be the responsibility of the user. Use only shielded data cables with this system. Intentional emitter per FCC Part 15 (If fitted with 2.4G band or 5G band) Low power, Radio LAN type devices (radio frequency (RF) wireless communication devices), operating in the 2.4GHz/5GHz Band, may be present (embedded) in your notebook system. This section is only applicable if these devices are present. Refer to the system label to verify the presence of wireless devices. Wireless devices that may be in your system are only qualified for use in the United States of America if an FCC ID number is on the system label. Chapter 5 Appendix 103 This device is restricted to indoor use due to its operation in the 5.15 to 5.25 GHz frequency range. FCC requires this product to be used indoors for the frequency range 5.15 to 5.25 GHz to reduce the potential for harmful interference to co-channel Mobile Satellite systems. High power radars are allocated as primary users of the 5.25 to 5.35 GHz and 5.65 to 5.85 GHz bands. These radar stations can cause interference with and /or damage this device. Operation of this device is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation of the device. Wireless devices are not user serviceable. Do not modify them in any way. Modification to a wireless device will void the authorization to use it. Contact manufacturer for service. Regulatory Compliance Statements FCC Part 68 (If fitted with a modem device.) This equipment compiles with part of the FCC rules. On the back of this equipment is a label that contains, among other information, the FCC registration number and ringer equivalence number (REN) for this equipment. If requested, this information must be provided to the telephone company. This equipment uses the following USOC jacks : RJ11C An FCC compliant telephone cord and modular plug is provided with this equipment. This equipment is designed to be connected to the telephone network or promises wiring using a compatible modular jack which is Part 68 compliant. See Installation Instructions for details. The REN is used to determine the quantity of devices which may be connected to telephone line. Excessive RENs on the telephone line may result in the devices not ringing in response to an incoming call. In most, but not all areas, the sum of RENs should not exceed five (5.0). To be certain of the number of devices that may be connected to a line, as determined by total RENs, contact the local telephone company to determine the maximum REN for the calling area. If the terminal equipment causes harm to the telephone network, the Telephone Company will notify you in advance that temporary discontinuance of service may be required. But if advance notice is not practical, the telephone company will notify the customer as soon as possible. Also, you will be advised of your right to file a complaint with the FCC if you believe it is necessary. The telephone company may make changes in its facilities, Chapter 5 Appendix 104 equipment, operations, or procedures that could affect the operation of the equipment. If this happens, the telephone company will provide advanced notice in order for you to make necessary modifications to maintain uninterrupted service. If trouble is experienced with this equipment (Modem) for repair or warranty information, please contact your local distributor. If the equipment is causing harm to the telephone network, the telephone company may request that you disconnect the equipment until the problem is resolved. The user must use the accessories and cables supplied by the manufacturer to get optimum performance from the product. No repairs may be done by the customer. This equipment cannot be used on public coin phone service provided by the telephone company. Connection to party line service is subject to state tariffs. The Telephone Consumer Protection Act of 1991 makes it unlawful for any person to use a computer or other electronic device, including fax machines, to send any message unless such message clearly contains in a margin at the top or bottom of each transmitted page or on the first page of the transmission, the date and time it is sent and an identification of the business or other entity, or other individual sending the message and the telephone number of the sending machine or such business, other entity, or individual. (The telephone number provided may not be any number for which charges exceed local or long-distance transmission charges.) In order to program this information into your fax machine, refer to your communications software user manual. Regulatory Compliance Statements Canada Unintentional Emitter per ICES-003 This digital apparatus does not exceed the Class B limits for radio noise emissions from digital apparatus as set out in the radio interference regulations of Industry Canada. Le présent appareil numérique n’émet pas de bruits radioélectriques dépassant les limitesapplicables aux appareils numériques de Classe B prescrites dans le règlement sur le brouillage radioélectrique édicté par Industrie Canada. Intentional Emitter per RSS 210 This device complies with RSS 210 of Industry Canada. Operation is subject to the following two conditions: (1) this device may not cause interference, and (2) this device must accept any interference, including interference that may cause undesired operation of this device.” L‘ utilisation de ce dispositif est autorisée seulement aux conditions suivantes : (1) il ne doit pas produire de brouillage et (2) l’ utilisateur du dispositif doit étre prêt à accepter tout brouillage radioélectrique reçu, même si ce brouillage est susceptible de compromettre le fonctionnement du dispositif. Chapter 5 Appendix 105 The term “IC” before the equipment certification number only signifies that the Industry Canada technical specifications were met. To reduce potential radio interference to other users, the antenna type and its gain should be so chosen that the equivalent isotropically radiated power (EIRP) is not more than that required for successful communication. To prevent radio interference to the licensed service, this device is intended to be operated indoors and away from windows to provide maximum shielding. Equipment (or its transmit antenna) that is installed outdoors is subject to licensing. Pour empecher que cet appareil cause du brouillage au service faisant l’objet d’une licence, il doit etre utilize a l’interieur et devrait etre place loin des fenetres afin de Fournier un ecram de blindage maximal. Si le matriel (ou son antenne d’emission) est installe a l’exterieur, il doit faire l’objet d’une licence. (If fitted with 2.4G band or 5G band) Low power, Radio LAN type devices (radio frequency (RF) wireless communication devices), operating in the 2.4GHz/5GHz Band, may be present (embedded) in your notebook system. This section is only applicable if these devices are present. Refer to the system label to verify the presence of wireless devices. Wireless devices that may be in your system are only qualified for use in Canada if an Industry Canada ID number is on the system label. Regulatory Compliance Statements When using IEEE 802.11a wireless LAN, this product is restricted to indoor use due to its operation in the 5.15- to 5.25-GHz frequency range. Industry Canada requires this product to be used indoors for the frequency range of 5.15 GHz to 5.25 GHz to reduce the potential for harmful interference to co-channel mobile satellite systems. High power radar is allocated as the primary user of the 5.25- to 5.35-GHz and 5.65 to 5.85-GHz bands. These radar stations can cause interference with and/or damage to this device. The maximum allowed antenna gain for use with this device is 6dBi in order to comply with the E.I.R.P limit for the 5.25- to 5.35 and 5.725 to 5.85 GHz frequency range in point-to-point operation. The power output of the wireless device (or devices), which may be embedded in your notebook, is well below the RF exposure limits as set by Industry Canada. Operation of this device is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation of the device. To prevent radio interference to licensed service, this device is intended to be operated indoors and away from windows to provide maximum shielding. Equipment (or its transmit antenna) that is installed outdoors is subject to licensing. Wireless devices are not user serviceable. Do not modify them in any way. Modification to a wireless device will void the authorization to use it. Contact manufacturer for service. Chapter 5 Appendix 106 (Si l’appareil est équipé d’une bande 2,4 G ou 5 G) Des dispositifs de basse puissance, de type radio LAN (périphériques de communication sans fil par radiofréquence RF) fonctionnant sur une bande de 2.4GHz/5GHz sont peutêtre intégrés dans votre appareil. Cette section est applicable uniquement si ces dispositifs sont présents. Consultez l’étiquette du système pour vérifiez la présence de dispositifs sans fil. Les dispositifs sans fil qui peuvent être intégrés dans votre système sont uniquement aptes pour une utilisation au Canada si l’étiquette du système présente un nombre d’identification d’Industrie Canada. En cas d’utilisation d’un LAN sans fil IEEE 802.11a, ce produit ne peut être utilisé qu’à l’intérieur en raison de son fonctionnement dans une plage des fréquences allant de 5,15 à 5,25 GHz. Industrie Canada exige l’utilisation de ce produit à l’intérieur pour une plage des fréquences allant de 5,15 à 5,25 GHz afin de réduire les éventuelles interférences nuisibles avec les systèmes mobiles par satellite du même canal. Le radar de grande puissance est considéré comme l’utilisateur principal des bandes de 5,25 à 5,35 GHz et de 5,65 à 5,85 GHz. Ces stations radar peuvent provoquer des interférences avec ce périphérique et/ou l’endommager. Le gain d’antenne maximum autorisé avec ce périphérique est de 6 dBi afin de respecter la limite de P.I.R.E. pour une plage des fréquences de 5,25 à 5,35 GHz et de 5,725 à 5,85 GHz dans un fonctionnement point à point. La sortie de puissance du dispositif sans fil (ou des dispositifs) qui peut être intégré dans votre système est bien inférieure aux limites d’exposition de RF établies par Industrie Canada. Regulatory Compliance Statements Son utilisation est soumise aux deux conditions suivantes : 1) ce dispositif ne peut pas provoquer d’interférences nuisibles et 2 2) ce dispositif doit accepter toute interférence reçue, y compris les interférences qui peuvent provoquer des anomalies dans le système. Afin de prévenir des interférences de radio au service autorisé, ce dispositif est prévu pour être utilisé à l’intérieur et éloigné des fenêtres pour fournir une protection maximum. Un équipement (ou son antenne de transmission) qui est installé à l’extérieur est sujet à une autorisation. Les dispositifs sans fil ne peuvent pas être réparés par l’utilisateur. Ne les modifiez en aucune façon. La modification d’un dispositif sans fil annulera votre autorisation à son utilisation. Contactez le fabricant pour la réparation. Chapter 5 Appendix 107 Telecommunications per DOC notice (for products fitted with an IC-compliant modem) The Industry Canada label identifies certified equipment. This certification means that the equipment meets certain telecommunications network protective, operation, and safety requirements. The Department does not guarantee the equipment will operate to the users’ satisfaction. Before installing this equipment, users should make sure that it is permissible to be connected to the facilities of the local telecommunications company. The equipment must also be installed using an acceptable method of connection. In some cases, the inside wiring associated with a single-line individual service may be extended by means of a certified connector assembly. The customer should be aware that compliance with the above conditions may not prevent degradation of service in some situations. Repairs to certified equipment should be made by an authorized Canadian maintenance facility designated by the supplier. Any repairs or alterations made by the user to this equipment, or equipment malfunctions, may give the telecommunications company cause to request the user to disconnect the equipment. Users should make sure, for their own protection, that the electrical ground connections of the power utility, telephone lines, and internal metallic water pipe system, if present, are connected together. This precaution may be particularly important in rural areas. Regulatory Compliance Statements To avoid electrical shock or equipment malfunction do not attempt to make electrical ground connections by yourself. Contact the appropriate inspection authority or an electrician, as appropriate. The Ringer Equivalence Number (REN) assigned to each terminal device provides an indication of the maximum number of terminals allowed to be connected to a telephone interface. The termination on an interface may consist of any combination of devices subject only to the requirement that the sum of the Ringer Equivalence Numbers of all the devices does not exceed 5. Déclarations sur les télécommunications selon DOC (pour des produits munis d’un modem homologué par la IC) L’étiquette d’Industrie Canada identifie un équipement autorisé. Cette autorisation signifie que l’équipement satisfait certaines exigences pour la sécurité, fonctionnement et protection des réseaux téléphoniques. Le département ne garantie pas que l’équipement fonctionne comme le désirerait l’utilisateur. Avant d’installer l’équipement, les utilisateurs doivent s’assurer que leur connexion aux installations de la compagnie de télécommunication locale soit permise. L’équipement doit être également installé selon une méthode acceptable de connexion. Dans certains cas, l’installation électrique associée à un service de ligne individuel peut être Chapter 5 Appendix 108 rallongé par un connecteur homologué. Le client doit savoir que la conformité aux conditions précédentes ne garantit pas un fonctionnement parfait dans toutes les situations. Les réparations de l’équipement homologué doivent être effectuées dans les installations de maintenance canadiennes autorisées par le fournisseur. Les réparations ou modifications effectuées par l’utilisateur sur cet équipement, ou anomalies de l’équipement, peuvent faire que la compagnie de télécommunication demande la déconnexion de l’équipement. Les utilisateurs doivent s’assurer, pour leur propre protection, que les raccordements électriques à la terre, les lignes de téléphone et l’infrastructure de la conduite d’eau, si il y en a, sont connectés ensemble. Cette précaution peut être particulièrement importante dans les zones rurales. Afin d’éviter une électrocution ou le disfonctionnement de l’équipement, n’essayez pas de faire vous-même les raccordements électriques à la terre. Contactez l’autorité inspectrice adéquate ou un électricien, selon il conviendra. Le Numéro d’équivalence d’appel (REN) attribué à chaque dispositif terminal fourni une indication du nombre maximum de terminales qui peuvent être connectées à une interface téléphonique. Le bout d’une interface peut contenir n’importe quelle combinaison de dispositifs sujets uniquement à la condition que le total des numéros d’équivalence d’appel de tous les dispositifs ne dépasse pas 5. Regulatory Compliance Statements Brazil Este equipamento opera em caráter secundário, isto é, não tem direito a proteção contra interferência prejudicial, mesmo de estações do mesmo tipo, e não pode causar interferência a sistemas operando em caráter primário. Chapter 5 Appendix 109 European Directives This Information Technology Equipment has been tested and found to comply with the following European directives: •• EMC Directive 2004/108/EC •• Low Voltage Directive 2006/95/EC •• R&TTE Directive 1999/5/EC European Union European Union CE Marking and Compliance Notices Products intended for sale within the European Union are marked with the Conformité Européene (CE) Marking, which indicates compliance with the applicable Directives and European standards and amendments identified below. This equipment also carries the Class 2 identifier. The following information is only applicable to systems labeled with the CE mark Manufacturer Information Samsung Electronics Co., Ltd. 416, Maetan-3Dong, Yeongtong-Gu, Suwon-City, Gyeonggi-Do, 443-742, Korea Samsung Electronics Suzhou Computer Co., Ltd. No. 198, Fangzhou Road, Suzhou Industrial Park, Jiangsu Province, 215021, China Tel: +86-512-6253-8988 For the web or the phone number of Samsung Service Centre, see the Warranty or contact the retailer where you purchased your product. Regulatory Compliance Statements European Radio Approval Information (for products fitted with EU-approved radio devices) This Product is a Notebook computer; low power, Radio LAN type devices (radio frequency (RF) wireless communication devices), operating in the 2.4GHz/5GHz band, may be present (embedded) in your notebook system which is intended for home or office use. This section is only applicable if these devices are present. Refer to the system label to verify the presence of wireless devices. Wireless devices that may be in your system are only qualified for use in the European Union or associated areas if a CE mark with a Notified Body Registration Number and the Alert Symbol is on the system label. The power output of the wireless device or devices that may be embedded in you notebook is well below the RF exposure limits as set by the European Commission through the R&TTE directive. Chapter 5 Appendix EU R&TTE Compliance Statements Česky [Czech] Samsung tímto prohlašuje, že tento Notebook PC je ve shodě se základními požadavky a dalšími příslušnými ustanoveními směrnice 1999/5/ES. Dansk [Danish] Undertegnede Samsung erklærer herved, at følgende udstyr Notebook PC overholder de væsentlige krav og øvrige relevante krav i direktiv 1999/5/EF. Deutsch [German] Hiermit erklärt Samsung, dass sich das Gerät Notebook PC in Übereinstimmung mit den grundlegenden Anforderungen und den übrigen einschlägigen Bestimmungen der Richtlinie 1999/5/EG befindet. Eesti [Estonian] Käesolevaga kinnitab Samsung seadme Notebook PC vastavust direktiivi 1999/5/ EÜ põhinõuetele ja nimetatud direktiivist tulenevatele teistele asjakohastele sätetele. English Hereby, Samsung, declares that this Notebook PC is in compliance with the essential requirements and other relevant provisions of Directive 1999/5/EC. Español [Spanish] Por medio de la presente Samsung declara que el Notebook PC cumple con los requisitos esenciales y cualesquiera otras disposiciones aplicables o exigibles de la Directiva 1999/5/CE. The low band 5.15 - 5.35 GHz is for indoor use only. See 802.11b and 802.11g restrictions for specific countries or regions within countries under the heading “European Economic Area Restrictions” below. 110 Regulatory Compliance Statements Ελληνική [Greek] ΜΕ ΤΗΝ ΠΑΡΟΥΣΑ Samsung ΔΗΛΩΝΕΙ ΟΤΙ Notebook PC ΣΥΜΜΟΡΦΩΝΕΤΑΙ ΠΡΟΣ ΤΙΣ ΟΥΣΙΩΔΕΙΣ ΑΠΑΙΤΗΣΕΙΣ ΚΑΙ ΤΙΣ ΛΟΙΠΕΣ ΣΧΕΤΙΚΕΣ ΔΙΑΤΑΞΕΙΣ ΤΗΣ ΟΔΗΓΙΑΣ 1999/5/ΕΚ. Français [French] Par la présente Samsung déclare que l’appareil Notebook PC est conforme aux exigences essentielles et aux autres dispositions pertinentes de la directive 1999/5/CE. Italiano [Italian] Con la presente Samsung dichiara che questo Notebook PC è conforme ai requisiti essenziali ed alle altre disposizioni pertinenti stabilite dalla direttiva 1999/5/CE. Latviski [Latvian] Ar šo Samsung deklarē, ka Notebook PC atbilst Direktīvas 1999/5/EK būtiskajām prasībām un citiem ar to saistītajiem noteikumiem. Šiuo Samsung deklaruoja, kad šis Notebook PC Lietuvių atitinka esminius reikalavimus ir kitas 1999/5/ [Lithuanian] EB Direktyvos nuostatas. Nederlands [Dutch] Malti [Maltese] Hierbij verklaart Samsung dat het toestel Notebook PC in overeenstemming is met de essentiële eisen en de andere relevante bepalingen van richtlijn 1999/5/EG. Hawnhekk, Samsung, jiddikjara li dan Notebook PC jikkonforma mal-ħtiāijiet essenzjali u ma provvedimenti oħrajn relevanti li hemm fid-Dirrettiva 1999/5/EC. Chapter 5 Appendix 111 Alulírott, Samsung nyilatkozom, hogy a Magyar Notebook PC megfelel a vonatkozó alapvetõ [Hungarian] követelményeknek és az 1999/5/EC irányelv egyéb elõírásainak. Polski [Polish] Niniejszym Samsung oświadcza, Ŝe Notebook PC jest zgodny z zasadniczymi wymogami oraz pozostałymi stosownymi postanowieniami Dyrektywy 1999/5/EC. Samsung declara que este Notebook PC está Português conforme com os requisitos essenciais e outras [Portuguese] disposições da Directiva 1999/5/CE. Slovensko [Slovenian] Samsung izjavlja, da je ta Notebook PC v skladu z bistvenimi zahtevami in ostalimi relevantnimi določili direktive 1999/5/ES. Slovensky [Slovak] Samsung týmto vyhlasuje, že Notebook PC spĺňa základné požiadavky a všetky príslušné ustanovenia Smernice 1999/5/ES. Suomi [Finnish] Samsung vakuuttaa täten että Notebook PC tyyppinen laite on direktiivin 1999/5/ EY oleellisten vaatimusten ja sitä koskevien direktiivin muiden ehtojen mukainen. Svenska [Swedish] Härmed intygar Samsung att denna Notebook PC står I överensstämmelse med de väsentliga egenskapskrav och övriga relevanta bestämmelser som framgår av direktiv 1999/5/ EG. Regulatory Compliance Statements Íslenska [Icelandic] Hér með lýsir Samsung yfir því að Notebook PC er í samræmi við grunnkröfur og aðrar kröfur, sem gerðar eru í tilskipun 1999/5/EC. Samsung erklærer herved at utstyret Notebook Norsk PC er i samsvar med de grunnleggende krav og [Norwegian] øvrige relevante krav i direktiv 1999/5/EF. Türkiye [Türkçe] Bu belge ile, Samsung bu Notebook PC’nin 1999/5/EC Yönetmeliğinin temel gerekliliklerine ve ilgili hükümlerine uygun olduğunu beyan eder. To view the EU Declaration of Conformity for this product (in English only), go to: http://www.samsung.com/uk/support/ download/supportDownMain.do then search the model number of the product. If the Declaration of Conformity for the model you are interested in is not available on our web-site, please contact your distributor. Chapter 5 Appendix 112 European Economic Area Restrictions Local Restriction of 802.11b/802.11g Radio Usage [Note to integrator: The following statements on local restrictions must be published in all end-user documentation provided with the system or product incorporating the wireless product.] Due to the fact that the frequencies used by 802.11b/802.11g wireless LAN devices may not yet be harmonized in all countries, 802.11b/802.11g products are designed for use only in specific countries or regions, and are not allowed to be operated in countries or regions other than those of designated use. As a user of these products, you are responsible for ensuring that the products are used only in the countries or regions for which they were intended and for verifying that they are configured with the correct selection of frequency and channel for the country or region of use. Any deviation from permissible settings and restrictions in the country or region of use could be an infringement of local law and may be punished as such. Regulatory Compliance Statements Chapter 5 Appendix The European variant is intended for use throughout the European Economic Area. However, authorization for use is further restricted in particular countries or regions within countries, as follows: France General 2.400 - 2.454 GHz (channels 1 to 7) for outdoor use. European standards dictate maximum radiated transmit power of 100 mW effective isotropic radiated power (EIRP) and the frequency range 2400 – 2483.5 MHz. For Guadeloupe, Martinique, St Pierre et Miquelon, Mayotte: The low band 5.15 - 5.35 GHz is for indoor use only. For Metropolitan departments: 2.400 - 2.4835 GHz for indoor use. 2.400 - 2.4835 GHz for indoor and outdoor use. For Reunion, Guyane: Belgium 2.400 - 2.4835 GHz for indoor use. The product may be used outdoors, but for outdoor transmissions over a distance of 300m or more, a license from the BIPT is required. 2.420 - 2.4835 GHz for outdoor use (channels 5 to 13) This restriction should be indicated in the manual as follows: Dans le cas d’une utilisation privée, à l’extérieur d’un bâtiment, audessus d’un espace public, aucun enregistrement n’est nécessaire pour une distance de moins de 300m. Pour une distance supérieure à 300m un enregistrement auprès de l’IBPT est requise. Pour une utilisation publique à l’extérieur de bâtiments, une licence de l’IBPT est requise. Pour les enregistrements et licences, veuillez contacter l’IBPT. The low band 5.15 - 5.35 GHz is for indoor use only. 113 Regulatory Compliance Statements European Telecommunication Information (for products fitted with EU-approved modems) Marking by the symbol indicates compliance of this equipment to the Radio and Telecom Terminal Equipment Directive 1999/5/ EC. Such marking is indicative that this equipment meets or exceeds the following technical standards: CTR 21 - Attachment requirements for pan-European approval for connection to the analogue Public Switched Telephone Networks (PSTNs) of TE (excluding TE supporting voice telephony services) in which network addressing, if provided, is by means of Dual Tone Multi-Frequency (DTMF) signaling. Although this equipment can use either loop disconnect (pulse) or DTMF (tone) signaling, only the performance of the DTMF signaling is subject to regulatory requirements for correct operation. It is therefore strongly recommended that the equipment is set to use DTMF signaling for access to public or private emergency services. DTMF signaling also provides faster call setup. Chapter 5 Appendix 114 This equipment has been approved to Council Decision 98/482/ EEC - “CTR 21” for Pan-European single terminal connection to the Public Switched Telephone Network (PSTN). However, due to differences between the individual PSTNs provided in different countries, the approval does not, of itself, give an unconditional assurance of successful operation on every PSTN termination point. In the event of problems, you should contact manufacturer Technical Support. WEEE Symbol Information Correct disposal of this product (Waste Electrical & Electronic Equipment) Chapter 5 Appendix Pb 115 Correct disposal of batteries in this product (Applicable in the European Union and other European countries with separate collection systems) (Applicable in the European Union and other European countries with separate battery return systems.) This marking on the product, accessories or literature indicates that the product and its electronic accessories (e.g. charger, headset, USB cable) should not be disposed of with other household waste at the end of their working life. This marking on the battery, manual or packaging indicates that the batteries in this product should not be disposed of with other household waste at the end of their working life. Where marked, the chemical symbols Hg, Cd or Pb indicate that the battery contains mercury, cadmium or lead above the reference levels in EC Directive 2006/66. If batteries are not properly disposed of, these substances can cause harm to human health or the environment. To prevent possible harm to the environment or human health from uncontrolled waste disposal, please separate these items from other types of waste and recycle them responsibly to promote the sustainable reuse of material resources. Household users should contact either the retailer where they purchased this product, or their local government office, for details of where and how they can take these items for environmentally safe recycling. Business users should contact their supplier and check the terms and conditions of the purchase contract. This product and its electronic accessories should not be mixed with other commercial wastes for disposal. To protect natural resources and to promote material re-use, please separate batteries from other types of waste and recycle them through your local, free battery return system. USA ONLY This Perchlorate warning applies only to primary CR (Maganese Dioxide) Lithium coin cells in the product sold or distributed ONLY in California USA. “Perchlorate Material- special handling may apply, See www.dtsc. ca.gov/hazardouswaste/perchlorate.” Dispose unwanted electronics through an approved recycler. To find the nearest recycling location, go to our website: www.samsung.com/recyclingdirect Or call, (877) 278-0799 Product Specifications Chapter 5 Appendix 116 The system specifications may differ depending on the derived models. For detailed system specifications, refer to the product catalogue. •• Optional components may not be provided or different components may be provided depending on the computer model. CPU Intel i3/i5/i7 (Core) / Pentium Processor Main Memory Memory type: DDR3 SDRAM on board Main Chipset Intel HM65 Storage Device SSD Graphics Intel HD Graphics (Internal) •• The hard disk drive capacity of a computer in which Samsung Recovery Solution is installed, is represented as smaller than the product specification. Temperature: -5~40°C for storage, 10~32°C when operating •• The amount of memory that Windows can use may be smaller than the actual amount of memory available. Humidity: 5~90% for storage, 20~80% when operating •• For this model, you cannot replace, add or upgrade the hard disk drive and the battery, memory by yourself due to the design. Operating Environment AC/DC Rating (Optional) Input) 100-240VAC, 50/60Hz, PC Rating (Optional) 19VDC 2.1A (40W) Output) 19VDC 2.1A •• The system specifications are subject to change without notice. Product Specifications Registered Trademarks Samsung is a registered trademark of Samsung Co., Ltd. Intel, ATOM/Pentium/Celeron are registered trademarks of the Intel Corporation. Microsoft, MS-DOS, and Windows are registered trademarks of the Microsoft Corporation. All other product or company names mentioned herein are registered trademarks of their respective companies. Chapter 5 Appendix 117 ENERGY STAR® Partner As an ENERGY STAR® Partner, SAMSUNG has determined that this product meets the ENERGY STAR® guidelines for energy efficiency. Glossary Chapter 5 Appendix 118 The Glossary lists the terminologies used in this User Guide. For terminologies other than these, look in Windows Help. Backup DHCP (Dynamic Host Configuration Protocol) A way to save the current data to restore it later if necessary. A backup is a way to restore computer data when the data or computer is damaged. This refers to automatically allocating IP addresses to the users on the network by the network administrators. Chargeable USB An application interface developed to enable Windows application programs to access hardware devices at a very high speed. Since the operating speed of graphics, memory and sound cards must be very fast to provide high quality video and sound for games, Direct X enables faster control and interaction between applications and hardware devices. By using Direct X, the multimedia performance of Windows has been hugely improved. This program enables supplying power to a specific USB port when the system is in power saving mode, hibernation mode or off. Client This refers to a computer that uses a shared network resource provided by a server. DDR SDRAM (Double Data Rate Synchronous Dynamic Random Access Memory) DRAM is a memory type whose cells consist of a capacitor and transistor manufactured at a low price. SDRAM is a memory type whose performance has been improved by synchronizing the clock with the external CPU clock. DDR SDRAM is a memory type whose performance has been improved by doubling the operating speed of the SDRAM and is widely used nowadays. This computer uses DDR SDRAM. Device Manager An administrative tool used to manage computer devices. You can add or remove hardware or update a device driver using the Device Manager. Direct X Driver Software that interacts between the hardware and the operating system. An operating system knows the hardware information and controls the hardware. In general, a driver is supplied with the corresponding hardware device. D-sub (D-subminiature) This is the cable connecting a general CRT monitor and the computer. Analog video is output through this cable. Glossary Chapter 5 Appendix 119 DVD (Digital Versatile Disk) LAN (Local Area Network) DVD was developed to replace CD (compact disk). Although the shape and size of the disc are the same as that of a CD, the capacity of a DVD is at least 4.7GB while the capacity of a CD is 600MB. DVD video is digital unlike VHS (analog) video and supports MPEG2 compression and digital audio. To play a DVD, a DVD drive is required. A communications network connecting computers, printers and other devices within a local area such as within a building. A LAN enables all connected devices to interact with other devices on the network. The current LAN uses the Ethernet media access control method developed in the early 1980s. To connect to an Ethernet, a network card called a LAN card, Ethernet card or network interface card is required. To exchange data between computers, a protocol is required besides the hardware equipment. Windows Vista uses TCP/IP as the default protocol. eSATA This is an external version of the SATA interface currently being used to connect a hard disk drive or ODD in a computer. It is an external port used to connect a main board or a hard disk drive. Firewall A security system used to protect an internal network or intranet from external networks through an authentication procedure. HDMI This is a digital video / audio interface specification that transmits video and audio signals over a single cable. Hibernation Mode A power mode that saves all data in memory to the hard disk and turns the CPU and hard disk off. When canceling Hibernation Mode, all application programs that were running are restored to their last state. Icon This refers to a small image that represents a file that users can use. LCD (Liquid Crystal Display) There are Passive Matrix and Active Matrix LCD types. This computer uses the Active Matrix type LCD called a TFT LCD. Since an LCD is implemented by transistors instead of a cathode-ray tube unlike a CRT, its size can be slim. And because it does not blink, it reduces eye strain. MMC (MultiMedia Card) card This is an external-type flash memory used for mobile devices such as mobile phones or digital cameras. Network A group of computers and devices, such as printers and scanners, connected by a communications link. A network can be either small or large and can be connected permanently through cables or temporarily through telephone lines or wireless links. The biggest network is the Internet, a worldwide network. Glossary Chapter 5 Appendix 120 Network Administrator Quick Launch A user who plans, configures and manages network operations. Sometimes, a network administrator is called a system administrator. This refers to a toolbar that can be configured so that you can launch a program such as Internet Explorer or display the Windows Desktop with one click. You can add any icon to the quick launch area of the Taskbar and launch frequently used program by clicking that icon. Notification Area This refers to the right area of the Taskbar including program icons such as the volume control, the power options and the time. Partition This refers to the act or practice of dividing the storage space of a hard disk drive into separate data areas known as partitions. If a 100GB hard disk drive is partitioned into 2 x 50GB partitions, the hard disk drive can be used as if there are 2 hard disk drives. PCMCIA (Personal Computer Memory Card International Association) card This is an extended card slot specification for mobile computers such as a notebook computer. Not only a memory, device but also most peripherals such as hard disk drives, LAN cards, etc. can be connected to this card slot. Protocol A protocol is a set of rules used by computers to communicate with each other across a network. A protocol is a convention or standard that controls or enables the connection, communication, and data transfer between computing endpoints. It defines the data transmission procedures and the transmission medium for more efficient network functions. SD (Secure Digital) card An SD card is a flash (non-volatile) memory card developed for mobile devices by improving on the MMC card. Although an MMC card can be used in an SD card slot, an SD card is not recognized when inserted into an MMC card. SDHC (Secure Digital High Capacity) card This is the extension of the SD card that supports over 2GB bytes. Server In general, a server refers to a computer that provides shared resources for network users. Share This refers to setting a resource of a computer such as a folder or printer so that other users can also use it. Shared Folder A folder that can be used by other users on the network. Glossary Chapter 5 Appendix 121 Sleep Mode Windows Media Player A power mode that enables computers to save power consumption when they are not being used. When a computer is in Sleep Mode, the data on the computer memory is not saved to the hard disk. If the power is turned off, the data in memory will be lost. A multimedia program included with Windows. Using this program, you can play a media file, create an audio CD, listen to a radio broadcast, search and manage media files, and copy files to a portable device, etc. System File System Files refer to files that are read and used by the Windows operating system. In general, system files must not be deleted or moved. TCP/IPv4 This is a 4 byte (32 bit) address system separated into each byte (8 bits) by a dot and each byte is represented as a decimal number. USB (Universal Serial Bus) This refers to a serial interface standard developed to replace the conventional interface standards such as Serial and PS/2. While USB 1.1 supports 12Mbps (12 million bits per second), USB 2.0 supports a data rate that is 40 times (480Mpbs) faster than that of USB 1.1. The data rate of USB 2.0 is equivalent to that of IEEE1394. Therefore USB 2.0 is used for A/V devices supported by IEEE 1394 and a 2nd HDD and CDRW that require a high data rate. Virtual XP Mode This is a virtual operating system that enables running Windows XP programs on the Windows 7 operating system. Using this mode, you can run programs that do not run on Windows 7. Index Chapter 5 Appendix AP 63 LCD Brightness 71 Battery 77 Micro SD Card Slot 50 BIOS Setup 74 Monitor Connection / Output 52 Booting Priority 76 Charge 78 Click 35 24 Product Specifications Double-Click 35 Drag 36 Recorder Dual View 53 Safety Precautions 116 58 Samsung Recovery Solution 83 Scroll 36 Volume Control Overview 122 58 Wired Network 60 Wireless Network 63
Source Exif Data:
File Type : PDF File Type Extension : pdf MIME Type : application/pdf PDF Version : 1.3 Linearized : No Has XFA : No XMP Toolkit : Adobe XMP Core 4.2.1-c041 52.342996, 2008/05/07-20:48:00 Instance ID : uuid:ed511ee6-a04b-41d8-a90d-a95f307d5dbe Document ID : adobe:docid:indd:832172a7-a1ec-11e0-ac85-82ffdb50dadc Rendition Class : proof:pdf Derived From Instance ID : 4b6055db-9d35-11e0-83da-d9eec77f8e08 Derived From Document ID : adobe:docid:indd:4b6055da-9d35-11e0-83da-d9eec77f8e08 Manifest Link Form : ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream Manifest Placed X Resolution : 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00 Manifest Placed Y Resolution : 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00 Manifest Placed Resolution Unit : Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches Manifest Reference Instance ID : uuid:CB49B275D163DF11B65D9A37D0CC8287, uuid:CB49B275D163DF11B65D9A37D0CC8287, uuid:CB49B275D163DF11B65D9A37D0CC8287, uuid:50D66381170DDE119FB2F53A11564CCC, uuid:9b818aae-2f40-486a-aa88-2743822df6cb, uuid:FA9F4869AD7DDE11A22ADD1E4CB69882, uuid:B7376369865DDD11B56CD2C4DD843A9D, uuid:9A62BBAA105DDD118948C3EFE9EF1DC7, uuid:CB49B275D163DF11B65D9A37D0CC8287, uuid:f0702652-a9fb-487a-82f5-e46144651901, uuid:9002631CBB4DDF11AA1DEBFC72BE3CDC, uuid:B8376369865DDD11B56CD2C4DD843A9D, uuid:37BDAFEF7C61DD118ED2DF6B07DDBD52, uuid:9102631CBB4DDF11AA1DEBFC72BE3CDC, uuid:CB49B275D163DF11B65D9A37D0CC8287, uuid:CB49B275D163DF11B65D9A37D0CC8287, xmp.iid:3CC95DE6D5F5DF118B0090E611470256, uuid:9762BBAA105DDD118948C3EFE9EF1DC7, uuid:F9A351C2135DDD118948C3EFE9EF1DC7, uuid:FAA351C2135DDD118948C3EFE9EF1DC7, uuid:E512656FF45DDD11A37DBA2AF6BA68C1, uuid:CB49B275D163DF11B65D9A37D0CC8287, uuid:CB49B275D163DF11B65D9A37D0CC8287, uuid:6BD4ECD01A24DE119ECDD15A8DF3F2D4, uuid:46E0C53B1F0ADE11A2758F8DBE5E495F, uuid:DEF02B1FA663DF1194E3F2D364023C51, uuid:DEF02B1FA663DF1194E3F2D364023C51, uuid:CB49B275D163DF11B65D9A37D0CC8287, uuid:c7d33f82-2b36-4d81-9bd2-48fc1d317d80, uuid:7ab47244-c23f-4e0a-8c4d-3111cc767b5b, uuid:BB503195C8A8DE119B65D57C02A21B59, uuid:CB49B275D163DF11B65D9A37D0CC8287, uuid:CB49B275D163DF11B65D9A37D0CC8287, uuid:CB49B275D163DF11B65D9A37D0CC8287, uuid:CB49B275D163DF11B65D9A37D0CC8287, uuid:CB49B275D163DF11B65D9A37D0CC8287, uuid:CB49B275D163DF11B65D9A37D0CC8287, uuid:CB49B275D163DF11B65D9A37D0CC8287, uuid:CB49B275D163DF11B65D9A37D0CC8287, uuid:CB49B275D163DF11B65D9A37D0CC8287, uuid:3EB1C134BAA2E0118342F7247EAC2069, uuid:CB49B275D163DF11B65D9A37D0CC8287, uuid:CB49B275D163DF11B65D9A37D0CC8287, uuid:CB49B275D163DF11B65D9A37D0CC8287, xmp.iid:130F59AB8CA3E011AB17F71094EE2BB3, uuid:CB49B275D163DF11B65D9A37D0CC8287, uuid:CB49B275D163DF11B65D9A37D0CC8287, uuid:CB49B275D163DF11B65D9A37D0CC8287, uuid:CB49B275D163DF11B65D9A37D0CC8287, uuid:CB49B275D163DF11B65D9A37D0CC8287, uuid:CB49B275D163DF11B65D9A37D0CC8287, uuid:CB49B275D163DF11B65D9A37D0CC8287, uuid:CB49B275D163DF11B65D9A37D0CC8287, uuid:CB49B275D163DF11B65D9A37D0CC8287, uuid:CB49B275D163DF11B65D9A37D0CC8287, uuid:CB49B275D163DF11B65D9A37D0CC8287, uuid:CB49B275D163DF11B65D9A37D0CC8287, uuid:CB49B275D163DF11B65D9A37D0CC8287, uuid:CB49B275D163DF11B65D9A37D0CC8287, uuid:CB49B275D163DF11B65D9A37D0CC8287, uuid:CB49B275D163DF11B65D9A37D0CC8287, uuid:CB49B275D163DF11B65D9A37D0CC8287, uuid:CB49B275D163DF11B65D9A37D0CC8287, uuid:CB49B275D163DF11B65D9A37D0CC8287, uuid:CB49B275D163DF11B65D9A37D0CC8287, uuid:CB49B275D163DF11B65D9A37D0CC8287, xmp.iid:771941BE4DF0DF119973900313DAB192, xmp.iid:771941BE4DF0DF119973900313DAB192, uuid:CB49B275D163DF11B65D9A37D0CC8287, uuid:CB49B275D163DF11B65D9A37D0CC8287, uuid:CB49B275D163DF11B65D9A37D0CC8287, xmp.iid:771941BE4DF0DF119973900313DAB192, uuid:CB49B275D163DF11B65D9A37D0CC8287, uuid:27acaa5f-ad85-467b-bfec-91773d3b12b7, uuid:27acaa5f-ad85-467b-bfec-91773d3b12b7, uuid:CB49B275D163DF11B65D9A37D0CC8287, uuid:CB49B275D163DF11B65D9A37D0CC8287, uuid:CB49B275D163DF11B65D9A37D0CC8287, uuid:CB49B275D163DF11B65D9A37D0CC8287, uuid:CB49B275D163DF11B65D9A37D0CC8287, uuid:CB49B275D163DF11B65D9A37D0CC8287, uuid:CB49B275D163DF11B65D9A37D0CC8287, uuid:CB49B275D163DF11B65D9A37D0CC8287, uuid:CB49B275D163DF11B65D9A37D0CC8287, uuid:CB49B275D163DF11B65D9A37D0CC8287 Manifest Reference Document ID : uuid:CA49B275D163DF11B65D9A37D0CC8287, uuid:CA49B275D163DF11B65D9A37D0CC8287, uuid:CA49B275D163DF11B65D9A37D0CC8287, uuid:4ED66381170DDE119FB2F53A11564CCC, uuid:885a3b87-c02a-4f23-b9b9-ebf68bf4d261, uuid:4BD66381170DDE119FB2F53A11564CCC, uuid:3CCDE7E195EEDC11BD21C9977B4828CB, uuid:40CDE7E195EEDC11BD21C9977B4828CB, uuid:CA49B275D163DF11B65D9A37D0CC8287, uuid:7e905469-81e4-4b00-8d2b-5fb2a91afc74, uuid:8F02631CBB4DDF11AA1DEBFC72BE3CDC, uuid:5D456E4E7EECDC11A85B862B884043FF, uuid:3ACDE7E195EEDC11BD21C9977B4828CB, uuid:63456E4E7EECDC11A85B862B884043FF, uuid:CA49B275D163DF11B65D9A37D0CC8287, uuid:CA49B275D163DF11B65D9A37D0CC8287, xmp.did:3CC95DE6D5F5DF118B0090E611470256, uuid:8A60B108A4ECDC11A85B862B884043FF, uuid:C66E0A98EBECDC118CE9940DE860D2B0, uuid:CB6E0A98EBECDC118CE9940DE860D2B0, uuid:ABC4BBFACDF0DC119D69EF9D6B367C93, uuid:CA49B275D163DF11B65D9A37D0CC8287, uuid:CA49B275D163DF11B65D9A37D0CC8287, uuid:69D4ECD01A24DE119ECDD15A8DF3F2D4, uuid:45E0C53B1F0ADE11A2758F8DBE5E495F, uuid:CA49B275D163DF11B65D9A37D0CC8287, uuid:7DFECBE25A20DC11B0DEE7A943A14516, uuid:885a3b87-c02a-4f23-b9b9-ebf68bf4d261, uuid:9C209E58B4A8DE11BF59D0092434A19B, uuid:CA49B275D163DF11B65D9A37D0CC8287, uuid:CA49B275D163DF11B65D9A37D0CC8287, uuid:CA49B275D163DF11B65D9A37D0CC8287, uuid:CA49B275D163DF11B65D9A37D0CC8287, uuid:CA49B275D163DF11B65D9A37D0CC8287, uuid:CA49B275D163DF11B65D9A37D0CC8287, uuid:CA49B275D163DF11B65D9A37D0CC8287, uuid:CA49B275D163DF11B65D9A37D0CC8287, uuid:CA49B275D163DF11B65D9A37D0CC8287, uuid:974363FF68A1E011A5F0F8C0293B43F5, uuid:CA49B275D163DF11B65D9A37D0CC8287, uuid:CA49B275D163DF11B65D9A37D0CC8287, uuid:CA49B275D163DF11B65D9A37D0CC8287, xmp.did:98A27D73389EE011AA4ACE746B435270, uuid:CA49B275D163DF11B65D9A37D0CC8287, uuid:CA49B275D163DF11B65D9A37D0CC8287, uuid:CA49B275D163DF11B65D9A37D0CC8287, uuid:CA49B275D163DF11B65D9A37D0CC8287, uuid:CA49B275D163DF11B65D9A37D0CC8287, uuid:CA49B275D163DF11B65D9A37D0CC8287, uuid:CA49B275D163DF11B65D9A37D0CC8287, uuid:CA49B275D163DF11B65D9A37D0CC8287, uuid:CA49B275D163DF11B65D9A37D0CC8287, uuid:CA49B275D163DF11B65D9A37D0CC8287, uuid:CA49B275D163DF11B65D9A37D0CC8287, uuid:CA49B275D163DF11B65D9A37D0CC8287, uuid:CA49B275D163DF11B65D9A37D0CC8287, uuid:CA49B275D163DF11B65D9A37D0CC8287, uuid:CA49B275D163DF11B65D9A37D0CC8287, uuid:CA49B275D163DF11B65D9A37D0CC8287, uuid:CA49B275D163DF11B65D9A37D0CC8287, uuid:CA49B275D163DF11B65D9A37D0CC8287, uuid:CA49B275D163DF11B65D9A37D0CC8287, uuid:CA49B275D163DF11B65D9A37D0CC8287, uuid:CA49B275D163DF11B65D9A37D0CC8287, xmp.did:771941BE4DF0DF119973900313DAB192, xmp.did:771941BE4DF0DF119973900313DAB192, uuid:CA49B275D163DF11B65D9A37D0CC8287, uuid:CA49B275D163DF11B65D9A37D0CC8287, uuid:CA49B275D163DF11B65D9A37D0CC8287, xmp.did:771941BE4DF0DF119973900313DAB192, uuid:CA49B275D163DF11B65D9A37D0CC8287, uuid:e1f3931a-bd62-49e3-818f-1a2b997d556b, uuid:e1f3931a-bd62-49e3-818f-1a2b997d556b, uuid:CA49B275D163DF11B65D9A37D0CC8287, uuid:CA49B275D163DF11B65D9A37D0CC8287, uuid:CA49B275D163DF11B65D9A37D0CC8287, uuid:CA49B275D163DF11B65D9A37D0CC8287, uuid:CA49B275D163DF11B65D9A37D0CC8287, uuid:CA49B275D163DF11B65D9A37D0CC8287, uuid:CA49B275D163DF11B65D9A37D0CC8287, uuid:CA49B275D163DF11B65D9A37D0CC8287, uuid:CA49B275D163DF11B65D9A37D0CC8287, uuid:CA49B275D163DF11B65D9A37D0CC8287 Create Date : 2011:07:12 18:51:55+09:00 Modify Date : 2011:08:17 19:14:29+08:00 Metadata Date : 2011:08:17 19:14:29+08:00 Creator Tool : Adobe InDesign CS3 (5.0.4) Thumbnail Format : JPEG Thumbnail Width : 256 Thumbnail Height : 256 Thumbnail Image : (Binary data 8490 bytes, use -b option to extract) Format : application/pdf Title : Nike-Tab_eng.indb Producer : Adobe PDF Library 8.0 Trapped : False GTS PDFX Version : PDF/X-3:2002 GTS PDFX Conformance : PDF/X-3:2002 Page Count : 61 Creator : Adobe InDesign CS3 (5.0.4)EXIF Metadata provided by EXIF.tools