Samsung Electronics Co YABS300 Bluetooth Speaker System User Manual YA BS300 0712 indd
Samsung Electronics Co Ltd Bluetooth Speaker System YA BS300 0712 indd
Manual
YA-BS300 Bluetooth Speaker user manual SAFETY INFORMATION FCC This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) This device must accept any interference received, including interference that may cause undesired operation. Caution: Any changes or modifications in construction of this device which are not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications, However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: - Reorient or relocate the receiving antenna. - Increase the separation between the equipment and receiver. - Connect the equipment to an outlet on a circuit different from that to which the receiver is connected. - Consult the dealer or an experienced radio/TV technician for help. SAFETY INFORMATION (Continued) Declaration of Conformity We, Samsung Electronics Co.,Ltd., declares under its sole responsibility that the product, Trade name Samsung & Model name YP-S5, has been tested according to the part 15 of the FCC Rules. Party responsible for Product Compliance Samsung Electronics America QA Lab. 18600 Broadwick Street, Rancho Dominguez, CA 90220 Safety Instructions This manual describes how to properly use your stereo speaker. So read it carefully to prevent damage to the product. Non-compliance with the following safety instructions may lead to serious physical injury. Safety Instructions Non-compliance with the following safety instructions may lead to physical injury or damage to the CAUTION product. WARNING Do Never disassemble, repair or modify this product on your own. Do not expose the product to moisture or drop it in water. If the product gets wet, do not turn it on Contact a local Samsung Customer Care. Do not place the product in damp, dusty or sooty areas. Otherwise, it will cause fire or electric shock. Store the product away from dust or impurities. Use only Samsung provided or authorized accessories. Do not spray water on the product. Never wipe it with chemical substances such as benzene or thinner. As it may cause fire, electric shock or may damage the surface. Do not leave the product near a heating source higher than 95°F (35°C) or inside a sauna or a parked car. In summer, the temperature inside a parked car can go up to 80°C. Do not place the product near magnetic objects. Otherwise, it will cause a malfunction. The manufacturer or an installer is not allowed to provide safety-related service since radio facilities may cause electrical interferences. Contents What’s Included Preparation The following figures are provided for your visual understanding and may differ slightly from the actual product appearance. Safety Instructions ...........................................................................................................2 Contents ...........................................................................................................................3 What’s Included................................................................................................................3 Screen Displays............................... ................................................................................4 Charging ..................................................................................................................................4 Product Use Using Bluetooth .................................................................................................................5 What is Bluetooth? ......................................................................................................5 Turning on/off the Speaker..........................................................................................5 Paring the Stereo Speaker ........................................................................................5 Listening to Music........................................................................................................6 Using Call Functions ..................................................................................................7 Answering a Call ...................................................................................................7 Ending a call ..........................................................................................................7 Rejecting a call ......................................................................................................7 Dialling ....................................................................................................................7 Voice Dialling .........................................................................................................7 Switching a Call .....................................................................................................7 Making Phone Conversations While Listening to Music ....................................8 Answering Another Call ........................................................................................8 Using the Speaker with an External Device ....................................................................9 DNSe Sound Effect ..........................................................................................................9 Player USB Cable Line-in Cable You can purchase any of these accessories, if damaged, at the local Samsung customer care. Note Appendix Checklis Before Contacting Us ................................................................................10 Wireless Communications Specification .....................................................................11 Product Specifications ....................................................................................................11 Screen displays If you are using the product for the first time after the purchase or have not been it for an extended time, fully charge the battery before using the product. Charging using The product has equipped with a built-in battery pack. 1. Connect the narrow end (A) of the USB cable to the USB port of the speaker. Line-in cable port 2(B) Reset hole DNSe button 2. Connect the wide end (B) of the USB cable to the USB port ( ) of your PC. Volume Control button Charging: Red Charged: Green Next / Previous Track button Using the Battery Play / Pause button Power button Operation Status LED Charging Status LED 1(A) USB cable port Call/End call button Built-in speaker Neck chain loop Microphone It may take about 3 hours to fully charge the battery. However, the charging time can vary depending on the PC specification. You can check the remaining battery capacity by pressing and releasing the [ ] button in the power-on condition. Less than 30% in capacity: Red Between 30% and 60% in capacity: Purple Charge and store the battery within the temperature range of 40°F~95°F (5°C~35°C). Do not charge the battery for more than 12 hours. Over- charging /-/ over-discharging the battery can reduce the battery life. The battery is consumable and can reduce the usable life over time. More than 60% in capacity: Blue When the battery capacity is less than 30%, the status LED blinks red. Notes If you use the speaker during the charging process, the status LED can not turn green when the charging is complete. Using Bluetooth What is Bluetooth? Bluetooth is a computing and telecommunications industry specification that describes how MP3 players, hands-free (mobile phones) and computers can easily interconnect with each other and with home and business phones and computers using a short wireless connection. The Bluetooth device can cause noise or malfunction, depending on the conditions of use. Physical signal interference, for instance, if you carry a mobile phone in the back pocket and wear the speaker in the neck, or if you hold the speaker in the one hand and the mobile phone in the other hand Physical contact on the transmitting or receiving system of an external device Electrical variation from electrical jamming by a wall, corner or office partitioning Electrical interference from the same frequency-band devices including medical equipment, microwave oven and wireless LAN The longer the distance between the speaker and the MP3 player or the hands free mobile phone is, the quality will be deteriorated in proportion Besides, if the distance exceeds a certain range, the wireless networking is disconnected. When pairing the Bluetooth device with the product, ensure that the distance is as short as possible. The Bluetooth features of the speaker are optimised with Samsung products. If used with third party products, some of the Bluetooth features may not work properly. Note Turning on/off the Speaker If you want to turn on the stereo speaker, press and hold the [ than 2 seconds. ] button for more The indicator blinks blue. If you want to turn off the stereo speaker, press and hold the [ than 2 seconds. ] button for more Paring the Stereo Speaker Before you start! y You must pair the speaker with external devices you use before you can connect it to a Bluetooth mobile phone or other Bluetooth device. y When pairing the speaker, it is recommended to maintain the distance of less than 1 meter between the devices. 1. In the power-off condition, press and hold the [ ] button for 5 seconds. The left LED blinks blue and red alternately. The pairing standby status lasts about 3 minutes. In those 3 minutes, you should turn off and restart the speaker. 2. Select the Bluetooth menu on the Bluetooth device you use. 3. Search for Bluetooth devices available on the device you are using and selectfrom the search results. When selecting a device to connect, select so that you can listen to music from the speaker. For more information, refer to the device user manual. Listening to Music 4. If you are prompted to enter a pin code or password, enter <0000>. Before you start! y Check if the speaker is turned on. y Check if the speaker is connected to a Bluetooth device. The pairing of the speaker is completed 1. Play a music file on the connected Bluetooth device. Once you paired this product, you don’t need to pair it again. Notes Check and remember the pin code of an audio dongle if you connect this product to an audio dongle. If the pin code is other than <0000>, the connection will not be made. If the Bluetooth connection is not made in 5 minutes since its start, the speaker will automatically turn off. You can check the Bluetooth connection status with the indicator. Bluetooth Status LED Indicator Pairing Standby Blinks red and green Connection Standby Blinks red at intervals of 2.5 seconds Connected Blinks blue at intervals of 4 seconds ] button on the speaker. You don’t need to play You can also play the music by pressing the [ the music directly on the connected Bluetooth device. 2. Press the [ ] button. You can listen to music through the speaker. During music playback, press and release the [ hold it for more than 2 seconds to stop playing. ] button to pause the playback. Press and Button Operation ] button to adjust the volume. Volume Control: use the [ You can adjust the volume level from 00 to 15. ] button. Previous / Next Track: press the [ ] button during music playback. Rewind / Fast Forward: press and hold the [ Notes In Bluetooth connection mode, the Bluetooth connection can be terminated if the distance between speaker and Bluetooth device exceeds a certain range. When the distance is narrowed down to a certain range or you restart the speaker, the Bluetooth connection will be automatically be restored. If the speaker has been paired with the Bluetooth device, you can press the ] button to automatically restore the Bluetooth connection even in case of disconnection. Using Call Functions Dialling y Check if the speaker is turned on. y Check if the speaker is connected to a Bluetooth device. y Check if your mobile phone supports the appropriate functions before you can use the speaker to make phone conversations. Mobile phones that do not support the voice call function will not allow you to make a voice call through the speaker. Before you start! Answering a Call Press the [ ] button when you receive an incoming call. y Press the [ y Press a desired call number on your mobile phone. ] button on the speaker. That number will be dialled. y Press the [ Press and hold the [ beep. Call Volume Control ] button for more than 2 seconds and speak out the name after a ] button. Switching a Call Ending a Call When the conversation is over, press the [ ] button. If you want to switch a call from mobile phone to speaker, or speaker to mobile phone, press and hold the [ ] button for more than 2 seconds. Rejecting a Call Press and hold the [ call. ] button. The most recent call number will be dialled. Making a Call by Number Voice Dialling y You can make phone conversations through the speaker. If you want to adjust the call volume during the conversation, press the [ Dialling a recent call ] button for more than 2 seconds when you receive an incoming Note Depending on the mobile phone model, the most recent call number may be dialed without display on the screen. Making Phone Conversations While Listening to Music Before you start! y When you are listening to music on a MP3 player through the speaker set as , your mobile phone should have been connected as . If your mobile phone has been connected as , you can answer an incoming call while listening to music. ] button when you hear a ring from the speaker. y Check if your mobile phone supports the appropriate function.Normally, this function is available only in GSM phones. Call Waiting Ending a Call ] button. ] button during the conversation. y You can put the current call on hold. Press the [ y The music stops and the number will be dialled. When the conversation is over, press the [ Before you start! Press and release the [ Answering a Call While Listening to Music Press the [ Answering Another Call ] button again to disconnect from the waiting person. Answering Another Call During Conversations Making a Call While Listening to Music If you receive another call during the conversation, press and release the [ button. 1. Press and hold the [ y You can put the current call on hold and answer the second call. ] button for more than 2 seconds while listening to music. y The player stops playing. 2. Press the [ ] button. y The most recent call number will be dialled. Note If you want to send busy signal to the second call, press and release the [ button. If you want to end the current call and answer the second call, press and release ] button. the [ When the music is stopped, some mobile phones may move to the playlist depending on the model. To exit the playlist, press and hold the [ ] button for more than 2 seconds again. Using the Speaker with an External Device You can use the Line-in cable to listen to music through the stereo speaker from an external device that does not even support the Bluetooth functions. DNSe Sound Effect Repeat pressing the [ Press and hold the [ sound effect setting. Sound Effect 1. Use the Line-in cable to connect the output port (or Line-out port) of the external music player to the Line-in port of the speaker. 2. Press the Play button on the external music player. Notes ] button until a desired sound effect is selected. ] button for more than 2 seconds to check the current LED Indicator Standard Blinks once 3D Sound Mode Blinks twice Bass Boost Mode Blinksthree times 3D & Bass Boost Mode Blinks four times DNSe is a 3D surround sound effect technology developed by Samsung. The 3D technology enhances the surround sound effect, and the bass boost mode reinforces the bass to provide profound sound. DNSe is not enabled if you are listening to music by using the Line-in cable to connect to an external device. You can listen to music through the speaker. Note ] button if you want to make a call or answer an incoming call from the Bluetooth-connected Press the [ mobile phone while you are listening to music through the speaker using the Line-in cable. Checklist before Contacting Us Please check the followings before contacting us if you have a problem with the product. If the problem persists, contact us at the local Samsung Customer Care. Problem The player does not turn on. No button works properly. The battery usable time is different from the specification in the user manual. Music is not playing. Problem Check & Action If the player runs out of battery, it does not turn on. Charge the battery and try again. Press the [RESET] button to reset the system. Check if you have turned on the product. Press the [RESET] button to reset the player. The battery is consumable and can reduce the usable life over time. The usable time may differ, depending on the sound mode you set. A recharged battery can have less usable time if it is exposed to low or high temperature for an extended time. Check if the music files on the connected mobile phone or the MP3 player are supported by the appropriate device. Check Point & Action Bluetooth connection is not made. Some disturbance is heard during phone conversations. No phone call is made even when the speaker has been connected to the mobile phone as . Check if the Bluetooth device to use is paired with your player. The Bluetooth connection can be terminated if you turn off and restart the speaker, MP3 player or the mobile phone. In this case, try to connect again. In Bluetooth connection mode, the Bluetooth connection can be terminated if the interval between speaker and Bluetooth device exceeds a certain distance. If the distance is narrowed down to the effective range or you restart the speaker, the Bluetooth connection can be restored. Check if the Line-in cable is properly connected. Adjust the volume of the speaker or the mobile phone. Move to another place and try again. Check if the simultaneous connection function is selected in the Bluetooth setting of the mobile phone. 10
Source Exif Data:
File Type : PDF File Type Extension : pdf MIME Type : application/pdf PDF Version : 1.5 Linearized : No XMP Toolkit : 3.1-702 About : uuid:fff3ba5b-b253-405d-833a-40e5e0536206 Producer : Acrobat Distiller 7.0 (Windows) Creator Tool : Adobe InDesign CS2 (4.0.5) Modify Date : 2007:07:24 18:40:37+09:00 Create Date : 2007:07:18 19:53:06+09:00 Metadata Date : 2007:07:24 18:40:37+09:00 Document ID : uuid:c51f3205-5e26-45da-822e-a468c9271ba9 Instance ID : uuid:17c53546-b63f-4f2d-8a05-ad7c1dcc9315 Format : application/pdf Title : 영문 - YA-BS300_0712.indd Creator : Owner Has XFA : No Page Count : 13 Author : OwnerEXIF Metadata provided by EXIF.tools