Sato SATOTR3 RFID Reader/Writer Module Transmitter User Manual Install 2

Download:
Mirror Download [FCC.gov]
Document ID	453435
Application ID	fnsZkkh3vv7bo3vuJph5uA==
Document Description	Installation Manual 1
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	32.14kB (401737 bits)
Date Submitted	2004-07-26 00:00:00
Date Available	2004-07-26 00:00:00
Creation Date	2004-07-14 09:07:45
Producing Software	Acrobat PDFWriter 3.0J Windows
Document Lastmod	0000-00-00 00:00:00
Document Title	橡Install_2版.PDF
Document Creator	æ©¡Microsoft Word
Document Author:	æ©¡Unknown

Installation
Caution
Turn the Power OFF and unplug the power cable before installation.
1. Remove the Cover LH
Cover LH
Remove the screws (
4 positions)
2. Install the RFID Interface Board ASSY
Plug in the Interface Board and fix it on the printer
with two screws.
2. Pan Head Screw
(M3*6, SW+WL)
1. RFID Interface Board ASSY
3. Install the RFID Module Board ASSY
①The assembly of the eight spacers is carried
out to Module BR.
Module BR
②RSDRV board is fixed with four screws.
Signal cable is fixed on tie lap.
③RFID module is fixed with four screws.
Spacer(L=30mm)
Spacer(L=15mm)
Pan Head Screw
(M3*6, SW+WS)
④The signal cable which has come out of the
DRV board is connected to the connector (CN1)
of RFID module.
RFID module
DRV Board
Tie lap
4pcs
4pcs
8pcs
⑤Fix the Module Board on the Center Frame of the
upper-left side of the Motor with two screws.
S-tight Screw (M3*6)
RFID Module Board ASSY
※Tightening the screws may be a little hard.
4. Attach the Cable Clamp
Attach the Cable Clamp on the Cont PCB Bracket.
7. Cable Clamp
The position is the edges of the Bracket as
shown with the red arrows.
5. Remove the Sensor Cover
Slide the Sensor Knob to the arrow direction to
the end. Then pull out the Sensor Cover.
Sensor Cover
Sensor Knob
6. Remove the Antenna Cover
Removing the two screws release the Antenna
Cover. Be sure to not lose these screws as they
are to be used for installation.
Antenna Cover
Antenna Board
7. Install the RFID Antenna Board Set
①Antenna BR and an antenna board
are fixed by two nylon rivets.
Antenna BR
Nylon rivet
②Four collars are put into an antenna cover.
Collar
③Fix the Antenna BR on the reverse side of the
removed Antenna Cover with four P-tight screws
as shown in the picture.
6. P-tight Screw (M2.6*6)
8. Re-install the Antenna Cover (with Antenna)
Put the Antenna Cable through the hole on the
Center Frame for the pulled-out Sensor to the Cont
PCB side and re-install the Antenna Cover with the
screws removed in the process 6.
Cable of 5. RFID Antenna Board Set
9. Return the Sensor
Put the Sensor Cover on the Sensor and slide the
Sensor to the end.
Sensor Cover
10. Fix the Antenna Cable on the Sensor
Sensor
Remove the Spring on the end of the Sensor
from the Cont PCB side. Fix the Antenna Cable
on the bottom of the Sensor with the removed
Spring.
Confirm that the Cable does not get jammed by
sliding the Sensor.
Spring
Cable 1 turn
11. Connect the Antenna Cable
①Ferrite core is attached to an antenna cable.
②Connect the Antenna Cable to the connector at
the bottom of the Module Board and fix its route
with the Clamp.
Ferrite core
Clamp
Antenna Cable
RFID Module Board
12. Connect the RFID Cable SET
①Ferrite core is attached to RFID cable set.
②Connect the Interface Board and the Module
Board via the RFID Cable and fix its route with
the Cable Clamp.
Ferrite core
Cable 1 turn
RFID Cable Set
Cable Clamp

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.2
Linearized                      : No
Page Count                      : 5
Creator                         : .橡.Microsoft Word
Create Date                     : 2004:07:14 09:07:45
Title                           : .橡.Install_2版.PDF
Author                          : .橡.Unknown
Producer                        : Acrobat PDFWriter 3.0J Windows

EXIF Metadata provided by EXIF.tools