Savant Technologies GE Lighting a Savant 94440 Wireless Lamp Fixture (433 MHz) User Manual GE telligent Lutron InstructionSheet V2

Download:
Mirror Download [FCC.gov]
Document ID	2251899
Application ID	pkUsgwRby2ijs3eR3z2p1A==
Document Description	Instruction
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	15.42kB (192777 bits)
Date Submitted	2014-04-25 00:00:00
Date Available	2014-04-25 00:00:00
Creation Date	2014-03-21 15:03:59
Producing Software	Adobe PDF library 10.01
Document Lastmod	2014-04-11 16:07:30
Document Title	GE telligent Lutron InstructionSheet V2
Document Creator	Adobe Illustrator CC (Macintosh)

Instructions and Setup
Integrated Dimming
With integrated dimming you can control your
lights without using an in wall dimmer switch. You
can also set moods or scenes by connecting
multiple lights to the same wireless remote.
Your Lutron® Pico® wireless remote is pre-paired to
work with the GE telligent™ LED lamp with
integrated dimming. See instructions to pair
multiple lights with a single remote.
For more wireless remote set up and information
on, tabletop pedestals, faceplates, and mounting
adaptors, visit lutron.com/ picoremote.
Brightens to
full intensity
Brightens
Tap once:
Adjusts to
favorite level
Press and hold
for 6 seconds:
Saves new
favorite level
The GE telligent lamp will turn on to full
brightness every time power is applied. For
example, turning the lamp off then on with a
light switch will turn the lamp on to full
brightness.
Dims
Dims to off
Remote Control
10-year battery life
30 feet or more wireless range
No Setup Required
Remote and LED in package are pre-paired.
Simply keep the light switch on and remote will work at any time. The remote will not work if
the light switch connected to the lamp is turned off.
OPTIONAL: How to control multiple light bulbs.
To pair additional telligent™ LED light bulbs with this remote control.
Turn off the light
bulb with the
light switch and
wait 3 seconds.
OFF
Turn on the
light bulb with
the light switch.
Immediately press and hold the bottom
button on the remote control until the
light bulb flashes 3 times.
ON
3 seconds
Repeat these steps to pair additional light bulbs.
Control up to 10 GE telligent™ LEDs with 1 remote.
x3
The battery in this device contains Perchlorate material, special handling may apply.
For more information visit www.dtsc.ca.gov/hazardouswaste/perchlorate.
Programming of multiple
Lutron Pico remotes with
GE telligent™ LED lamps
Lutron Pico® remotes can be paired to any
number of GE telligent™ LED lamps within
range of the RF signal (at least 30 feet,
through most walls and floors). All lamps
will be controlled together by the paired
Pico® remote. For Pico® remotes with a
“Favorite” button, different paired lamps
can be programmed to different levels to
create a “scene”. This can be done by
following a simple procedure:
1. Ensure all lamps are paired to the
selected Pico® remote following the
provided procedure.
2. Unscrew or turn off power to all but one
paired lamp. Use the raise and lower
buttons on the Pico® remote until the
desired light level is reached for that
lamp. Press and hold the Favorite button
until the lamp acknowledges the light
level is saved.
3. Unscrew or remove power from the
just-programmed lamp, and apply power to
the next lamp. Repeat the raise/lower/save
procedure for the second lamp.
4. Repeat the procedure, applying power to
one single lamp at a time and saving the
light levels until all lamps have a Favorite
light level saved.
When power is reapplied to all lamps,
pressing the Favorite button will cause
them all to go to their different saved levels.
Note: all lamps paired to a Pico® remote
will go to a Favorite light level; lamps
cannot have an “unaffected” Favorite
level. Lamps can have different Favorite
light levels for each paired Pico® remote.
Un-pairing a Pico® remote from a
lamp
Following this procedure will prevent the
Pico® remote from controlling any lamps
associated with it. Note that lamps must
be powered on (but do not need to be
turned on) and within wireless range. All
programmed lamps should be powered on
for at least 30 seconds before starting this
procedure!
1. Press the Off button on the remote three
times within one second.
2. Hold the Off button for five seconds, until
the green LED on the Pico® remote turns on.
3. Press the Off button on the remote
three more times within one second. Any
associated lamps which are turned on and
within range will no longer be controlled
by the Pico® remote.
Restoring a lamp to its factory
default settings
This procedure will cause the lamp to no
longer be associated with ANY Pico®
remotes (including any that were
factory-paired in the same package). A
Pico® remote will need to be re-paired
with a lamp before the lamp can be
controlled again. All Favorite light levels
will also be lost.
To restore a lamp to its factory-default
settings, and clear all programming, follow
the “Un-pairing a Pico® remote from a
lamp” procedure within the first 30
seconds of a lamp powering up using an
already-paired Pico® remote. If successful
the lamp will flash three times, return to
full brightness, and the Pico® remote will
no longer control the lamp.

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.6
Linearized                      : Yes
Create Date                     : 2014:03:21 15:03:59-04:00
Creator                         : Adobe Illustrator CC (Macintosh)
Modify Date                     : 2014:04:11 16:07:30-04:00
Has XFA                         : No
XMP Toolkit                     : Adobe XMP Core 5.4-c005 78.147326, 2012/08/23-13:03:03
Format                          : application/pdf
Title                           : GE telligent Lutron InstructionSheet V2
Metadata Date                   : 2014:04:11 16:07:30-04:00
Creator Tool                    : Adobe Illustrator CC (Macintosh)
Thumbnail Width                 : 256
Thumbnail Height                : 160
Thumbnail Format                : JPEG
Thumbnail Image                 : (Binary data 19416 bytes, use -b option to extract)
Instance ID                     : uuid:a185f01c-7c37-4c8a-9ef3-d0f099690b1d
Document ID                     : xmp.did:dc5aa391-6be5-4511-aaf6-b9553452814a
Original Document ID            : uuid:5D20892493BFDB11914A8590D31508C8
Rendition Class                 : proof:pdf
Derived From Instance ID        : xmp.iid:427b68e2-6343-4617-acdc-36f50697ff49
Derived From Document ID        : xmp.did:427b68e2-6343-4617-acdc-36f50697ff49
Derived From Original Document ID: uuid:5D20892493BFDB11914A8590D31508C8
Derived From Rendition Class    : default
History Action                  : saved, saved
History Instance ID             : xmp.iid:70b7d31f-723a-4951-8614-1700516df8ee, xmp.iid:dc5aa391-6be5-4511-aaf6-b9553452814a
History When                    : 2013:10:03 10:50:10-04:00, 2014:03:21 15:03:55-04:00
History Software Agent          : Adobe Illustrator CC (Macintosh), Adobe Illustrator CC (Macintosh)
History Changed                 : /, /
Startup Profile                 : Print
Has Visible Overprint           : True
Has Visible Transparency        : False
N Pages                         : 1
Max Page Size W                 : 8.500000
Max Page Size H                 : 11.000000
Max Page Size Unit              : Inches
Font Name                       : ArialNarrow, GEInspira, GEInspira-Medium, GEInspira-Bold, GEInspira-ExtraBold, Myriad-Roman
Font Family                     : Arial Narrow, GE Inspira, GE Inspira, GE Inspira, GE Inspira, Myriad
Font Face                       : Regular, Regular, Medium, Bold, ExtraBold, Roman
Font Type                       : TrueType, Type 1, Type 1, Type 1, Type 1, Type 1
Font Version                    : Version 2.35, 002.000, 001.000, 002.000, 001.000, 001.000
Font Composite                  : False, False, False, False, False, False
Font File Name                  : Arial Narrow, GEIns; GE Inspira, GEInsMed; GE Inspira Medium, GEInsBol; GE Inspira, GEInsExtBol; GE Inspira Medium, MyriaRom
Plate Names                     : Cyan, Magenta, Yellow, Black, Lutron White, RDG_WHITE, PANTONE 422 C
Swatch Groups Colorants Red     : 152
Swatch Groups Colorants Green   : 145
Swatch Groups Colorants Blue    : 143
Swatch Groups Colorants Tint    : 100.000000
Swatch Groups Colorants L       : 49.803921
Swatch Groups Colorants A       : 69
Swatch Groups Colorants B       : 55
Swatch Groups Group Name        : Brights
Swatch Groups Group Type        : 1
Swatch Groups Colorants Swatch Name: C=60 M=90 Y=0 K=0
Swatch Groups Colorants Mode    : CMYK
Swatch Groups Colorants Type    : PROCESS
Swatch Groups Colorants Cyan    : 60.000000
Swatch Groups Colorants Magenta : 90.000000
Swatch Groups Colorants Yellow  : 0.003100
Swatch Groups Colorants Black   : 0.003100
Producer                        : Adobe PDF library 10.01
Page Layout                     : TwoPageLeft
Page Mode                       : UseThumbs
Page Count                      : 2

EXIF Metadata provided by EXIF.tools