Savi Technology 640T-V1 Active RF ID Tag User Manual 80503910A TCW

Savi Technology Inc Active RF ID Tag 80503910A TCW

Contents

Users Manual ST 645

TITLECODESCALE: NONEDRAWING No:SHEET 1 OF 2REV:DATEAPPLICATIONNEXT ASSEMBLYUSED ONREVISION RECORDLTRDESCRIPTIONDATEAPPROVEDDRAWNCHECKEDENGINEERPRODUCTIONMATERIALSUSTAININGPROJECT LEADERDATA CONTROLDATEDATEDATEDATEDATEDATEDATEDATEFILE NAME: 80503910A.TCW-001CONFIGURATION QUANTITYPART No.DESCRIPTIONITEM861-03910-TABST-645-XXAEO#2851 : INITIAL RELEASET. TRAN07/24/02INSTALLATION GUIDE,BOLT SEAL TAG, ST-645-XX805-03910-001BSLT2TEXT FILE (80503910A.doc)11II. QUALITY ASSURANCEA. INSPECTION1. INSPECT TEXT FOR MISSING OR SUB-STANDARD PAGES (PRINT QUALITY, ALIGNMENT, TORN, ETC).615 TASMAN DRIVESUNNYVALE, CALIFORNIA 94089SIZEANAA. INSTRUCTIONS :1. PRINTED MANUAL (TEXT)COPY FROM ELECTRONIC MEDIA ONTO 20# WHITE BOND PAPER.2. ASSEMBLYNO ASSEMBLY REQUIRED.FINAL FORMAT IS: 8.5" x 11" , SINGLE SIDED.I. MANUAL PREPARATIONA
Savi P/N 805-03910-001 (Rev. A) Keep This Document EchoPoint Tag ST-645 installation Guide The EchoPoint ST-645 tag consists of a printed circuit board with two non-replaceable batteries enclosed in a Fully potted, hermetically sealed plastic case with an armature containing two inductive coils. • The EchoPoint ST-645 tag contains a label on the top with the tag serial number in both bar code and numerical format and another label that includes product model number. The tag also contains a label on the bottom, which contains the compliance markings. • The EchoPoint ST-645 tag can be exposed to environments including rain, snow and direct exposure to sunlight. • The tag battery life is approximately 10 years under normal operating conditions. The tag contains two internal lithium batteries and should be discarded according to local safety requirements. Tag Mounting / Attachment • The EchoPoint ST-645 has a coil arm, which utilizes a locking bolt assembly. • Place the coil arm such that the holes align with the lock holes of the closed lock hasp. o Slide the lock bolt through the aligned holes and snap the bolt locking mechanism the portion of the bolt protruding past the bottom of the lock. o A tie wrap may be used to limit the extra movement of the tag in transit. Use the integrated tie wrap loop on the tag body to hold the tie wrap in place. After installation the tamper bit must be reset using the appropriate command from a 600 series Signpost and verified response is received on a 600 series SaviReader. Figure 1 EchoPoint Tag ST-645 Copyright 2002, Savi Technology, Inc. All rights reserved. First edition printed May 2002 The lithium batteries can be harmful to the environment. Please follow current procedures for safely disposing of lithium batteries TECHNOLOGY

Navigation menu