Scanreco G5RF 2.4 GHz Transceiver User Manual

Scanreco AB 2.4 GHz Transceiver

User Manual

Instruction Manual66065 AEnglishDocument Revision LanguageG5 RF
Attribute InformationDocument Type Instruction ManualTitle SCANRECO G5 Rocket FlexDocument No. 66065Language EnglishRelease date 2013-10-16Original EnglishRelease date (original) 2013-10-16Author SCANRECOCompany SCANRECO AB, SWEDENRevision Date NoteA 2013-10-16 First releaseDocument informationRevision historyAll rights reservedDesign, equipment, technical data and specications are subject to change or improvement without prior notice. The text in this instruction manual, or any part of it may not be reproduced or transmitted in any form or by any means, including electronic, mechanical, photocopying, recording, storage in an information retrieval system, or otherwise, without prior written permis-sion of SCANRECO AB, SWEDEN.Document type Document number PageRevInstruction Manual 66065 A2 of 8
Product description G5 Rocket Flex TransmitterThe G5 Rocket Flex HCU is a light weight, impact and water resistant handheld unit equipped with up to fourteen ON/OFF function buttons. It has six congurable Light Emitting Diodes (LED) for machine and status feedback. The buttons and the LED’s can be congured for a variety of different operations. The unit is powered with 3 standard AAA batteries and the backside has a belt clip for convenient at-tachment on the operator’s belt.Belt clip Battery compartment(Belt clip removed)Battery compartment(cover removed)LabelCharge indicationStop buttonButton 1 Button 2Button 3 Button 4Button 5 Button 6Button 7 Button 8Button 9 Button 10Button 11 Button 12Button 13 Button 14Led 3Led 2 Led 4Led 1 Led 5Document type Document number PageRevInstruction Manual 66065 A3 of 8
Model FunctionsG5 RF 10 10 Push buttons G5 RF 12 12 Push buttonsG5 RF 14 14 Push buttonsG5 RF 10 Display 10 Push buttonsG5 RF 12 Display 12 Push buttonsG5 RF 14 Display 14 Push buttons Versions The G5 Rocket Flex transmitter exists in the following versions: Functionality G5 RF 10 G5 RF 12 G5 RF 14 G5 RF 10 Display G5 RF 12 Display G5 RF 14 DisplayThe G5 Rocket-Flex systems are required to be congured prior to operation but normally this is done already before delivery. The push buttons are easily programmed to activate any output or series of functions. Button denitions include momentary, interlocked, non-latched or latched output. The models may have the different printed symbols on the buttons, colors, scripts, pictures etc. Document type Document number PageRevInstruction Manual 66065 A4 of 8
48mm42,2mm213mm69mmAttribute InformationHousing material Plastic PCIP-class IP67Ambient temperature -25˚C to +70˚CSupply 3 x AA batteryOperating time Several months (depending of usage and application)Weight 400g (0,88lb.) including batteryISO-13849 for stop function Category 3, PL D with G5 CU RxxxCategory 3, PL E with G5 CU MxxxDimensions:34,7mm83,5mm Technical information Document type Document number PageRevInstruction Manual 66065 A5 of 8
Attribute InformationFrequency 2,400 - 2,4835 GHzChannels managementFHSSDSSSTHSSChannel order PseudorandomChannel capacityDuplexSystem address/ID<16777216 unique system addresses availableRedundancy CRC-16Range 100 meters Technical information The G5 system family incorporates an automated frequency jumping technology, a reliable radio transmission highly resistant to interference.The radio transmission takes place within the ISM-band used at pre-dened channels.The channel switching takes place multiple times per second following a pseudorandom se-quence. This ensures that transmission takes place on an optimal frequency at all times!No transmitter uses the same pseudorandom sequence order when switching channels; this minimizes the risk of two G5 systems interfering with each other.The G5 Rocket-Flex is approved to transmit on the ISM band. The radio is license free for the end user. Radio informationDocument type Document number PageRevInstruction Manual 66065 A6 of 8
Document type Document number PageRevInstruction Manual 66065 A7 of 8zzThis equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a commercial environment. This equipment generates,uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instruction manual, may cause harmful interference to radio communications. Operation of this equipment in a residential area is likely to cause harmful interference in which case the user will be required to correct the interference at his own expense.This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.This device complies with Industry Canada licence-exempt RSS standard(s). Operation is subject to the following two conditions: (1) this device may not cause interference, and (2) this device must accept any interference, including interference that may cause undesired operation of the device. Le présent appareil est conforme aux CNR d’Industrie Canada applicables aux appareils radio exempts de licence. L’exploitation est autorisée aux deux conditions suivantes : (1) l’appareil ne doit pas produire de brouillage, et (2) l’utilisateur de l’appareil doit accepter tout brouillage radioélectrique subi, même si le brouillage est susceptible d’en compromettre le fonctionnement.CAN ICES-3 (A)/NMB-3(A)The antenna(s) used for this transmitter must be installed to provide a separationdistance of at least 20 cm from all persons and must not be co-located or operatingin conjunction with any other antenna or transmitter.When the device is stored on the operators belt it must be shut off. Pressing the buttons and operating the machine while the device is hanging from the belt or any other place it not allowed. It must be held in the hand.L’antenne (s) utiliseé pour cet émetteur doit être installé pour fournir une distance de séparation d’au moins 20 cm de toute personne et ne doit pas être co-localisées ou opérant en conjonction avec une autre antenne ou émetteur.Lorsque l’appareil est stocké sur la bande des opérateurs, il doit être arrêté. Appuyant sur les boutons et faire fonctionner la machine alors que l’appareil est accroché à la ceinture ou tout autre lieu il pas permis. Il doit être tenu à la main.Changes or modications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.Warning FCC information Industry Canada Information

Navigation menu