User Manual
| Download: |  |
| Mirror Download [FCC.gov] | |
| Document ID | 2268178 |
| Application ID | DMy32oiZcYk98DGpr7kTOQ== |
| Document Description | User Manual |
| Short Term Confidential | No |
| Permanent Confidential | No |
| Supercede | No |
| Document Type | User Manual |
| Display Format | Adobe Acrobat PDF - pdf |
| Filesize | 190.91kB (2386377 bits) |
| Date Submitted | 2014-05-15 00:00:00 |
| Date Available | 2014-06-26 00:00:00 |
| Creation Date | 2014-05-12 16:57:47 |
| Producing Software | Adobe PDF Library 10.0.1 |
| Document Lastmod | 2014-05-12 16:58:02 |
| Document Title | User Manual |
| Document Creator | Adobe InDesign CS6 (Macintosh) |
Instruction Manual G5 RF Document 66065 Revision Language English Document type Document number Instruction Manual 66065 Rev Page 2 of 8 Document information Attribute Document Type Title Document No. Information Instruction Manual SCANRECO G5 Rocket Flex 66065 Language Release date Original Release date (original) Author Company English 2013-10-16 English 2013-10-16 SCANRECO SCANRECO AB, SWEDEN All rights reserved Design, equipment, technical data and specifications are subject to change or improvement without prior notice. The text in this instruction manual, or any part of it may not be reproduced or transmitted in any form or by any means, including electronic, mechanical, photocopying, recording, storage in an information retrieval system, or otherwise, without prior written permission of SCANRECO AB, SWEDEN. Revision history Revision Date 2013-10-16 Note First release Document type Document number Instruction Manual 66065 Rev Page 3 of 8 G5 Rocket Flex Transmitter Product description The G5 Rocket Flex HCU is a light weight, impact and water resistant handheld unit equipped with up to fourteen ON/OFF function buttons. It has six configurable Light Emitting Diodes (LED) for machine and status feedback. The buttons and the LED’s can be configured for a variety of different operations. The unit is powered with 3 standard AAA batteries and the backside has a belt clip for convenient attachment on the operator’s belt. Stop button Charge indication Led 4 Led 5 Led 3 Led 2 Led 1 Button 1 Button 2 Button 3 Button 4 Button 5 Button 6 Button 7 Button 8 Button 9 Button 10 Button 11 Button 12 Button 13 Button 14 Belt clip Battery compartment (Belt clip removed) Label Battery compartment (cover removed) Document type Document number Instruction Manual 66065 Rev Page 4 of 8 Versions The G5 Rocket Flex transmitter exists in the following versions: G5 RF 10 G5 RF 12 G5 RF 14 G5 RF 10 Display Model Functions G5 RF 10 G5 RF 12 G5 RF 14 G5 RF 10 Display G5 RF 12 Display G5 RF 14 Display 10 Push buttons 12 Push buttons 14 Push buttons 10 Push buttons 12 Push buttons 14 Push buttons G5 RF 12 Display G5 RF 14 Display The models may have the different printed symbols on the buttons, colors, scripts, pictures etc. Functionality The G5 Rocket-Flex systems are required to be configured prior to operation but normally this is done already before delivery. The push buttons are easily programmed to activate any output or series of functions. Button definitions include momentary, interlocked, non-latched or latched output. Document type Document number Instruction Manual 66065 Rev Page 5 of 8 Technical information Attribute Information Housing material IP-class Ambient temperature Supply Operating time Weight ISO-13849 for stop function Plastic PC IP67 -25˚C to +70˚C 3 x AA battery Several months (depending of usage and application) 400g (0,88lb.) including battery Category 3, PL D with G5 CU Rxxx Category 3, PL E with G5 CU Mxxx Dimensions: 48mm 69mm 42,2mm 83,5mm 34,7mm 213mm Document type Document number Instruction Manual 66065 Rev Page 6 of 8 Radio information The G5 system family incorporates an automated frequency jumping technology, a reliable radio transmission highly resistant to interference. The radio transmission takes place within the ISM-band used at pre-defined channels. The channel switching takes place multiple times per second following a pseudorandom sequence. This ensures that transmission takes place on an optimal frequency at all times! No transmitter uses the same pseudorandom sequence order when switching channels; this minimizes the risk of two G5 systems interfering with each other. The G5 Rocket-Flex is approved to transmit on the ISM band. The radio is license free for the end user. Technical information Attribute Information Frequency Channels management 2,400 - 2,4835 GHz FHSS DSSS THSS Pseudorandom Channel order Channel capacity System address/ID Redundancy Duplex Range 100 meters <16777216 unique system addresses available CRC-16 Document type Document number Instruction Manual 66065 Rev FCC information This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a commercial environment. This equipment generates,uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instruction manual, may cause harmful interference to radio communications. Operation of this equipment in a residential area is likely to cause harmful interference in which case the user will be required to correct the interference at his own expense. Warning Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. Industry Canada Information This device complies with Industry Canada licence-exempt RSS standard(s). Operation is subject to the following two conditions: (1) this device may not cause interference, and (2) this device must accept any interference, including interference that may cause undesired operation of the device. Le présent appareil est conforme aux CNR d’Industrie Canada applicables aux appareils radio exempts de licence. L’exploitation est autorisée aux deux conditions suivantes : (1) l’appareil ne doit pas produire de brouillage, et (2) l’utilisateur de l’appareil doit accepter tout brouillage radioélectrique subi, même si le brouillage est susceptible d’en compromettre le fonctionnement. CAN ICES-3 (A)/NMB-3(A) The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. When the device is stored on the operators belt it must be shut off. Pressing the buttons and operating the machine while the device is hanging from the belt or any other place it not allowed. It must be held in the hand. L’antenne (s) utiliseé pour cet émetteur doit être installé pour fournir une distance de séparation d’au moins 20 cm de toute personne et ne doit pas être co-localisées ou opérant en conjonction avec une autre antenne ou émetteur. Lorsque l’appareil est stocké sur la bande des opérateurs, il doit être arrêté. Appuyant sur les boutons et faire fonctionner la machine alors que l’appareil est accroché à la ceinture ou tout autre lieu il pas permis. Il doit être tenu à la main. Page 7 of 8zz
Source Exif Data:
File Type : PDF File Type Extension : pdf MIME Type : application/pdf PDF Version : 1.7 Linearized : No XMP Toolkit : Adobe XMP Core 5.3-c011 66.145661, 2012/02/06-14:56:27 Create Date : 2014:05:12 16:57:47+02:00 Metadata Date : 2014:05:12 16:58:02+02:00 Modify Date : 2014:05:12 16:58:02+02:00 Creator Tool : Adobe InDesign CS6 (Macintosh) Instance ID : uuid:a0a705a0-a518-5d46-a9d5-0e1a6663fc38 Original Document ID : xmp.did:F77F11740720681192B0C0797B331098 Document ID : xmp.id:8D722374072068118083EBA4E9C88728 Rendition Class : proof:pdf Derived From Instance ID : xmp.iid:8C722374072068118083EBA4E9C88728 Derived From Document ID : xmp.did:8B722374072068118083EBA4E9C88728 Derived From Original Document ID: xmp.did:F77F11740720681192B0C0797B331098 Derived From Rendition Class : default History Action : converted History Parameters : from application/x-indesign to application/pdf History Software Agent : Adobe InDesign CS6 (Macintosh) History Changed : / History When : 2014:05:12 16:57:47+02:00 Format : application/pdf Producer : Adobe PDF Library 10.0.1 Trapped : False Page Count : 8 Creator : Adobe InDesign CS6 (Macintosh)EXIF Metadata provided by EXIF.tools