Scientific Toys 4339-49SV REMOTE CONTROL TOY RECEIVER User Manual INSTRUCTION MANUAL

Download:
Mirror Download [FCC.gov]
Document ID	823022
Application ID	XrZZpNzXL+WwvCb68VZX7w==
Document Description	INSTRUCTION MANUAL
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	8.68kB (108493 bits)
Date Submitted	2007-07-30 00:00:00
Date Available	2007-07-31 00:00:00
Creation Date	2007-07-23 17:38:04
Producing Software	Adobe Acrobat 7.08 Paper Capture Plug-in
Document Lastmod	2007-07-25 09:29:30
Document Title	INSTRUCTION MANUAL
Document Creator	Adobe Acrobat 7.08

TRANSMITER
POLICE CAR
BANDIT CAR
Diagram 1
POLICE CAR
Diagram 2
Diagram 4
Diagram 3
Turns left and right in forward
Forward
Reverse
Turns left and right in reverse
Diagram 5
Steering
lignment Lever
POLICE CAR
Diagram 6
Diagram 8
Diagram 7
PERFORMANCE TIPS
Do not drive the car on grass, sand or carpet.
Do not drive the car through water.
Be sure to rest your vehicie for at least 30 minutes after every 15 minutes of operation.
Make sure the ONIOFF switch on your vehicle is at the "OFF" position when it is not in use.
Do not bend the antenna.
Electrical, CB interference, mobile phones, air conditioning, elevators and steel girders in buildings
will affect the operation of your vehicie.
Do not leave the vehicle or transmitter near sources of heat or in direct sunlight tor long periods of time.
- Remove the batteries from the vehicle and transmitter when not in use.
- Do not mix old and new batteries.
Do not mix alkaline, standard (carbon-zinc), or rechargeable (Nickel-Cadmium)batteries.
OPERATING INSTRUCTIONS
HOW TO INSTALL BATTERIES IN VEHICLES
1. Push the ONfOFF switch to "OFF" positionon the
underside of the vehicie.
2. Turn the locking latch to open position.
3. Open the battery cover.
4. Insert the AA batteries by matching the (+) and (-)
signs as indicated in the battery compartment.
5. Replace the battery cover
6. Turn the locking latch to close position.
HOW TO INSTALL BATTERIES IN TRANSMITTERS
1. Unscrew to open the battery cover and install 2 " A A
batteries by matching the (+)and (-) signs as indicated
in the battery compartment.
2. Replace the battery cover.
BATTERY CAUTIONS
- Do not charge battery pack that is hot, wet or shows leakage or corrosion.
- May explode if disposed of in firei
- Do not disassemble the betterv ~ a c k .
- on-recharoeable batteries ark ;lot to be recharoed
- ~echargei6lebatteries a r i be removed from ihe toy before oelng charged
- Rechargeable batter es are only to be cnarged Lnder a d d supervls on
- Different types of batter es or new and ~ s e batter
es are not to oe m~xed
- Only baneiies of the same or equivalent type as recommendedare to be used.
- Batteriesare to be insertedwith the correct polarity.
- Exhausted batteries are to be removed from the tov.
The suonlv terminals are not to be short-clrculted
~h~siii;;not lntendeo forih~idrenLnder 3
old
- If the battery pack an0 connectors are net, thoroughly d y before charglng
- Overcharging can oamage the battery pack Charge according to recommendedt me
- This tov a i d ill accessorks must be ~eriodicalkexamined for uotentialhazards, and that potentially
hazardous parts must be repaired and replaced before use.
The antenna wires are not to be inserted into socket outlet.
to
SETTING UP THE POLICE CAR AND BANDIT CAR
1. Build UD the antenna bv insertim the cable into the antenna tube linciudedl comDietelv
and p i g the tLbe into ihe both i o l c e car ana band't car securely.'(see ~ i a g r a m
3)
2. Screw tne antenna on the top of the transm,tters ano extend to f, I ength. (see Diagram 4)
OPERATION
1. Push the vehicie ONJOFF switch to the " O N position (see Diagram 1)
2. Operate the police car and bandit car with the transmitter (see Diagram 5)
3. Turn OFF the vehicie and the transmitter after playing and remove ail batteries
from the transmitter and the cars.
4. To aojust steering al.gnment, ad,ust tne Steering A ignment Lever' on tne
Jnderside ol the vehicles wnen the venicies ooes not rdn straight lotward (see Diagram 6)
POLICE CHASE
1. Police car and bandit car can be played in one or two-player mode.
In two players game rnode,one player plays the police car when the other player plays the bandit car.
2. The player who plays the police car can press the siren button on the transmitter to play
police siren sound. (Diagram 7)
3. To catch the bandit car, police car has to chase after the bandit car and hit its rear bumper
(Diagram 8). After the police car hits the rear bumper of the bandit car, an arrestment
statement will play and the bandit car will be temporarily deactivated; it will resume its
normal operation in 5 seconds.
REMARK
If the rear bumper of bandit car hit the wall or other bbstacle, the bandit car wlll be temporarily deactivated.
This is not defective and the car will resume operation in a few second.
ATTENTION PARENTS: IT IS RECOMMENDED THAT THlS TOY AND ALL ACCESSORIES BE
PERlODlCALLY EXAMINED FOR POTENTIAL HAZARDS AND THAT ANY POTENTIALLY
HAZARDOUS PARTS BE REPAIRED OR REPLACED.
FCC NOTE:
THE ANTENNA PROVIDED IS A UNIQUE ANTENNA. BY INSTALLATION OF UNAUTHORIZED
ANTENNA TO THlS EQUIPMENT. SUCH UNAUTHORIZED INSTALLATION COULD VOlD THE
USER'S AUTHORITY TO OPERATE THE EQUIPMENT.
THE MANUFACTURER IS NOT RESPONSIBLE FOR ANY RADIO OR N INTERFERENCE
CAUSED BY UNAUTHORIZEDMODIFICATIONSTO THlS EQUIPMENT. SUCH MODIFICATIONS
COULD VOlD THE USER'S AUTHORITY TO OPERATE THE EQUIPMENT.
ZTEC,
EZ-TEC@IS A REGISTERED TRADEMARK OWNED B Y SCIENTIFIC TOYS, LTD.
O 2007 SCIENTIFIC TOYS, LTD., CHAl WAN, HONG KONG.
Visit us at www.ez-tec.com
PRINTED IN CHINA
0.1. N0.3895
SIZE: 210MM X 148.5MM PN#65-3895-100-0100

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.6
Linearized                      : No
XMP Toolkit                     : 3.1-702
Create Date                     : 2007:07:23 17:38:04Z
Modify Date                     : 2007:07:25 09:29:30-04:00
Metadata Date                   : 2007:07:25 09:29:30-04:00
Creator Tool                    : Adobe Acrobat 7.08
Format                          : application/pdf
Document ID                     : uuid:2ba91023-c17c-477d-aaf8-9087dbc58747
Instance ID                     : uuid:5911526e-259c-4603-a909-89287c788fcf
Producer                        : Adobe Acrobat 7.08 Paper Capture Plug-in
Has XFA                         : No
Page Count                      : 1
Creator                         : Adobe Acrobat 7.08

EXIF Metadata provided by EXIF.tools