Secure Wireless EV-F319 Wireless Remote Control Transmitter User Manual 6658 SW Evol Manual
Secure Wireless, Inc Wireless Remote Control Transmitter 6658 SW Evol Manual
User Manual
6658-SW-Evol Manual 10/7/02 10:05 PM Page 1 LOW BATTERY INDICATION LED will flash to indicate that Low Battery Supervision has been sent and the battery should be replaced. WARRANTY Secure Wireless offers a Lifetime Warranty on this product. Secure Wireless agrees to repair or replace this product at no cost to the user. For return authorization please contact: Secure Wireless 1185 Park Center Drive, Suite A/B Vista, CA 92083 (760) 727-0601 This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Caution: Any changes or modifications not expressly approved by Secure Wireless could void user's authority to operate the equipment. 4 Button Wireless Transmitter For use with Part #s: EV-F319/EV- F345/EV-F433 USER MANUAL Button 1 Button 2 Button 3 Button 4 6658-SW-Evol Manual 10/7/02 I . Programming the Remote into the Alarm System Refer to the programming guide that came with your alarm system for programming a wireless device (KEYFOB) into the security system. II. Changing Panic Operation to Delay Mode or Instant Mode Note: To use this feature you must have programmed button 4 into the alarm panel as “PANIC”. The 3 second delay is the factory default. SETTING PANIC BUTTON FOR DELAY TRANSMISSION MODE (By selecting this feature, the user must hold down panic button for 3 seconds before transmission is sent.) 10:05 PM Page 2 1. Press all 4 button at the same time until the LED begins to flash. (This will take approximately 3 seconds before LED flashes.) 2. Release all 4 buttons 3. Press Button 2 (TOP RIGHT BUTTON) 4. LED should stop flashing SETTING PANIC BUTTON INTO INSTANCE TRANSMISSION MODE 1. Press all 4 button at the same time until the LED begins to flash. (This will take approximately 3 seconds before LED flashes.) 2. Release all 4 buttons 3. Press Button 1 (TOP LEFT BUTTON) 4. LED should stop flashing
Source Exif Data:
File Type : PDF File Type Extension : pdf MIME Type : application/pdf PDF Version : 1.3 Linearized : No Create Date : 2002:10:07 22:06:09 Producer : Acrobat Distiller 4.0 for Macintosh Creator : QuarkXPressª 4.11: LaserWriter 8 8.7 Author : Karen Title : 6658-SW-Evol Manual Modify Date : 2002:12:06 18:22:08-08:00 Page Count : 2 Has XFA : NoEXIF Metadata provided by EXIF.tools