Secure Wireless SDW319 Door Window Sensor User Manual Manual

Download:
Mirror Download [FCC.gov]
Document ID	1480384
Application ID	LSoPRaZ3XBxqaeSUEQeVrw==
Document Description	Manual
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	21.6kB (270034 bits)
Date Submitted	2011-06-09 00:00:00
Date Available	2011-06-09 00:00:00
Creation Date	2010-12-21 12:12:48
Producing Software	Microsoft® Word 2010
Document Lastmod	2010-12-21 12:12:48
Document Title	Manual
Document Creator	Microsoft® Word 2010
Document Author:	JeffC

SLIM DOOR WINDOW SENSOR ENROLLMENT /
PROGRAMMING
The SW-NAP-SDW Door Window is equipped with an
internal reed switch as well as the ability to use as
external magnet .
For a detail programming guide, the instruction manual
should be consulted for that panel. The below guide
should only be used as a reference and not as a
replacement for using the programming instructions.
Pull Battery Tab
ENTER PANEL PROGRAMMING
ENTER Zone
ENTER Serial ID ( Auto-learn or Manual)
To Auto-Learn

Hit “Bypass”

Fault and Restore the device or the
tamper switch can be used.
To Manual Learn

Enter serial Id listed on back)

Enter Checksum ( digit after the
“:” on Serial ID)
1.
2.
3.
4.
Alpha Chart
A - *0
B - *1
C -*2
D - *3
E - *4
F - *5
DOOR WINDOW MOUTING / USAGE
The SW-NAP-SDW Door Window is equipped with an
internal reed switch as well as the ability to use an external
magnet.
Mounting
Double Sided Tape is included for
easy installation.
Reed Switch (Use Point 1
when Programming )
Align the Arrow on magnet with
the 3 lines on the side of the
sensor case
Mount the magnet no more than
¼ in from the sensor.
MANUAL PART #
ENTER POINT (1 for Internal Reed or 2
for External )
319.5 MHz
Limited Life time
(2) CR2032 Replace
with Panasonic
200-10003 Rev A
5.
External (Use Point 2 when
programming
Wire run to the External Magnet
can be no longer than 12 Ft in
length.
FREQUENCY
WARRANTY
BATTERY
Push ON/OFF to Save
SW-NAP-SDW
QNP-SDW319
6.
ODEL
FCC ID
FCC Compliance
This device complies with Part 15 FCC Rules.
Operation complies with the following 2 conditions
(1) This device may not cause harmful interference
and (2) this device must accept any interference
received, including interference that may cause
undesired operation
TECHNICAL SUPPORT
Secure Wireless 866-908-Tech
www.mysecurewireless.com
INSTALLATION MANUAL
NAPCO COMPATIBLE
Replace Cover
Pop open the case
using a coin. Replace
with new batteries. ( +
) or positive polarity
should be facing up
Slim Door Window Sensor
SW-NAP-SDW
REPLACING THE BATTERIES

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.5
Linearized                      : No
Page Count                      : 1
Language                        : en-US
Tagged PDF                      : Yes
Author                          : JeffC
Creator                         : Microsoft® Word 2010
Create Date                     : 2010:12:21 12:12:48-08:00
Modify Date                     : 2010:12:21 12:12:48-08:00
Producer                        : Microsoft® Word 2010

EXIF Metadata provided by EXIF.tools