Sensitech T11006740 Temperature Monitor User Manual T83 54
Sensitech, INC. Temperature Monitor T83 54
Manual
| Download: |  |
| Mirror Download [FCC.gov] | |
| Document ID | 560028 |
| Application ID | iRMiEhEIYYvLQhNqf9ihJA== |
| Document Description | Manual |
| Short Term Confidential | No |
| Permanent Confidential | No |
| Supercede | No |
| Document Type | User Manual |
| Display Format | Adobe Acrobat PDF - pdf |
| Filesize | 14.31kB (178870 bits) |
| Date Submitted | 2005-07-08 00:00:00 |
| Date Available | 2005-07-08 00:00:00 |
| Creation Date | 2005-02-09 12:01:47 |
| Producing Software | Acrobat Distiller 6.0 (Windows) |
| Document Lastmod | 2005-02-09 12:02:10 |
| Document Title | T83-54 |
| Document Creator | Acrobat PDFMaker 6.0 for PowerPoint |
| Document Author: | B. DeWitt |
Millions Depend on the Integrity of Your Product. Sensitech’s Mission is to Ensure that Integrity. The Tools That Turn Information Into Power RF TT4 Ambient 2K Monitor PN T11006740 User Manual TempTale® Manager Software TempTale® 3 Monitor Data Management Services TempTale® 4 Monitor RF Monitoring TagAlert™ Monitor For more information, contact our client services group at 800-843-8367. © 2005 All Rights Reserved. TempTale is a registered trademark and TagAlert is a trademark of Sensitech, Inc. 800 Cummings Center, Beverly, MA 01915 T11006740 FCC ID SRMT11006740 This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Changes or modifications not expressly approved by Sensitech could void the user’s authority to operate the equipment. Sensitech Inc. • 800 Cummings Center • Beverly, MA 01915 (978) 927-7033 • Fax (978) 921-2112 www.sensitech.com All TempTale®4 Monitors are programmed with a custom Start-up delay, measurement interval and alarm settings which have been pre-determined by the customer. Los monitores de TempTale®4 están programado con uno tiempo de demura, intervalo y limites de temperatura y tiempo que fueron requierido por el cliente. Starting a TempTale4 Monitor Iniciar el TempTale4 • • • • • Press and release the Start button. The “Sunshine” icon appears in the upper left corner of the display. The TempTale4 will begin to record data after the start-up delay has passed. • Presione y libere el botón de inicio “Start”. El icon del “Sol” aparecerá a la izquierda en la parte superior de la pantalla. El TempTale4 grabará despúes del tiempo de demura. To mark an important event (“Date Stamp”) Para marcar un evento importante (Estampa de fecha) • • • • TempTale4 monitors provide an option to “Date Stamp” or mark an important event at any time during the monitoring cycle that will be visible when viewing the data. The mark is displayed as an arrow when viewing the graph and shown in italics when viewing the tabular data. To mark a graph while the monitor is recording, press and release the “Start” button. The “arrow” icon will appear temporarily in the lower left corner and the temperature history will appear on the display. Data appears as follows: 1. 2. 3. 4. 5. Average temperature Highest temperature recorded Total time above high temperature limit Lowest temperature recorded Total time below low temperature limit • • Los TempTale4 monitores tienen la opción de marcar un evento importante que occura durante el envio. Se puede ver esta marca cuando se baja la información. La marca aparecerá como una flecha en el grafíco y en italico en el tabular. Para marcar el evento durante el envio, presione y libere el botón de inicio “Start”. Una flecha aparecerá en la pantalla y la información de temperatura aparecerá en el siguente orden: 1. 2. 3. 4. 5. Temperatura promedio Temperatura grabada más alta Tiempo total por encima del límite alto Temperatura grabada más baja Tiempo total bajo del límite bajo Alarma Alarm When the TempTale4 is exposed to a temperature outside a pre-programmed limit and time threshold, an “Alarm bell” will appear in the lower right corner of the LCD display. Stopping a TempTale4 Monitor Press and hold (1 to 3 seconds) the Stop button until the “Stop sign” appears in the upper right corner of the LCD display. Displayed Information icon Cuando el TempTale4 está fuera del límite bajo o alto del tiempo programado, un icon de alarma aparecerá a la derecha en la parte baja de la pantalla. Parar el TempTale4 Presione y libere (1 a 3 segundos) el botón de parar “Stop” hasta que el icon de “Stop” aparezca a la derecha en la parte superior de la pantalla. Pantalla del Monitor: Temperature data Información de temperatura Recording Stopped recording Iniciado Parado Marked Point Limits exceeded Marca de evento Alarma
Source Exif Data:
File Type : PDF File Type Extension : pdf MIME Type : application/pdf PDF Version : 1.4 Linearized : No Page Count : 2 XMP Toolkit : XMP toolkit 2.9.1-13, framework 1.6 About : uuid:6857401d-edcb-4c69-9eb6-c7c8bf4059a8 Comments : TempTale 4 - Instructions for Use Producer : Acrobat Distiller 6.0 (Windows) Company : Sensitech, Inc. Create Date : 2005:02:09 12:01:47-05:00 Creator Tool : Acrobat PDFMaker 6.0 for PowerPoint Modify Date : 2005:02:09 12:02:10-05:00 Metadata Date : 2005:02:09 12:02:10-05:00 Document ID : uuid:c020dd7a-96d6-4fee-b0d0-d8f05eed4503 Format : application/pdf Title : T83-54 Creator : B. DeWitt Tagged PDF : Yes Author : B. DeWitt Keywords : TempTale4, instructionsEXIF Metadata provided by EXIF.tools