Sensys Networks FLEXSPP Traffic Sensor System User Manual Quick Start Guide

Download:
Mirror Download [FCC.gov]
Document ID	3426024
Application ID	xj1SLto/295BBBY8p/fSRA==
Document Description	Quick Start Guide
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	97.48kB (1218525 bits)
Date Submitted	2017-06-14 00:00:00
Date Available	2017-06-14 00:00:00
Creation Date	2015-09-16 16:21:16
Producing Software	Adobe PDF Library 10.0.1
Document Lastmod	2015-09-16 16:21:30
Document Title	Quick Start Guide
Document Creator	Adobe InDesign CS6 (Windows)

Quick Start Guide: Access Point Controller Card (APCC)
Set Up
Recommendations
• Internet access is required to download TrafficDOT2 and Adobe Air, or you
need an offline version of Adobe Air and TrafficDOT2 same subnet as
AP/APCC.
• You must be able to change network setting of your laptop.
Download & Install Software
Download the installation package from the Sensys Networks
website: http://www.sensysnetworks.com/products/trafficdot.
Double-click on TrafficDOT2.exe and click Run.
Select Installation Preferences
Connect Cables
Click the checkboxes to select desired preferences. Click
Continue to accept the default installation location.
Cable the devices together with
Cat5 cables. Turn on controller.
Note: Click the folder icon to select another location for
TrafficDOT installation.
Note: Until Master Mode is on,
the Power and Link light will
be off.
1608
Berkeley CA
CA 94710|
94710 | info@sensysnetworks.com
info@sensysnetworks.com||PP510.548.4620
510.548.4620F F510.548.8264
510.548.8264
1608 4th
4th Street
Street Suite
Suite 200
200 Berkeley
Quick Start Guide: Access Point Controller Card (APCC)
Connect
Run TrafficDOT
Click the TrafficDOT icon to start the
configuration program.
Select Master Mode
Check Master Mode for each installed SPP radio and then click
Turn On Selected SPP(s).
Type in IP Address
Select an APCC IP Address and click Connect.
Save Changes
Click Yes to save to flash memory.
Note: Once Master Mode is on the Power LED on APCC isolator
should be on and the Link light should blink about every second.
1608
Berkeley CA
CA 94710|
94710 | info@sensysnetworks.com
info@sensysnetworks.com||PP510.548.4620
510.548.4620F F510.548.8264
510.548.8264
1608 4th
4th Street
Street Suite
Suite 200
200 Berkeley
Quick Start Guide: Access Point Controller Card (APCC)
Run
Open AP Config Panel
Click on the APCC to open the Access Point
Configuration Panel.
Set RF Channel
Click the Radio window:
Save Changes
Click Yes to save to flash memory.
1. Select RF Channel. The entries in the RF Channel
drop-down list correspond to the 16 channels available
for use. Select an entry from the list by clicking it. The
factory default channel is zero.
2. Click Apply.
1608
Berkeley CA
CA 94710|
94710 | info@sensysnetworks.com
info@sensysnetworks.com||PP510.548.4620
510.548.4620F F510.548.8264
510.548.8264
1608 4th
4th Street
Street Suite
Suite 200
200 Berkeley
Quick Start Guide: Access Point Controller Card (APCC)
Manage
Main Windows
• The default radio channel of the access point and sensors is
Channel 0 (zero).
Open System Config Panel
Click the System Config tab to open
the System Configuration Panel.
Start Controller Link & Set Time Zone
Click the Other tab (a), specify Time Zone (b),
click Save to AP(c).
• All sensors or repeaters on the APCC’s channel are found on
the Map View Tray or Table windows. Unassigned devices will
not show up on the map itself.
• Green icons indicate normal, expected operation.
• Use the configuration panel options to further configure the
system.
Note: Refer to the Sensys Networks Wireless Vehicle Detection
TrafficDOT 2 Set Up and Operating Guide for more information
Local Distributor
Sensys Networks and the Sensys Networks logo are trademarks of Sensys Networks, Inc. All other trademarks are the property of their respective owners.
Information contained herein is believed to be reliable, but Sensys Networks makes no warranties as to its accuracy or completeness.
Copyright © 2015 Sensys Networks, Inc. • ALL RIGHTS RESERVED • P/N 152-240-030-008 Rev D

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.4
Linearized                      : No
Tagged PDF                      : Yes
XMP Toolkit                     : Adobe XMP Core 5.2-c001 63.139439, 2010/09/27-13:37:26
Create Date                     : 2015:09:16 16:21:16-07:00
Metadata Date                   : 2015:09:16 16:21:30-07:00
Modify Date                     : 2015:09:16 16:21:30-07:00
Creator Tool                    : Adobe InDesign CS6 (Windows)
Instance ID                     : uuid:d73d0ae2-dfd8-4073-827c-972abbfe6f50
Original Document ID            : xmp.did:F77F1174072068118083FBAF5E674C88
Document ID                     : xmp.id:8C7A5958C95CE511BD39B21837EE5DD2
Rendition Class                 : proof:pdf
Derived From Instance ID        : xmp.iid:8B7A5958C95CE511BD39B21837EE5DD2
Derived From Document ID        : xmp.did:0A01DBDF6BCCE1119F96A4105ECA333D
Derived From Original Document ID: xmp.did:F77F1174072068118083FBAF5E674C88
Derived From Rendition Class    : default
History Action                  : converted
History Parameters              : from application/x-indesign to application/pdf
History Software Agent          : Adobe InDesign CS6 (Windows)
History Changed                 : /
History When                    : 2015:09:16 16:21:16-07:00
Format                          : application/pdf
Producer                        : Adobe PDF Library 10.0.1
Trapped                         : False
Page Count                      : 4
Creator                         : Adobe InDesign CS6 (Windows)

EXIF Metadata provided by EXIF.tools