Sercomm SZSRN01 ZigBee Siren Repeater User Manual SZ SRN01 V0 1

Sercomm Corporation ZigBee Siren Repeater SZ SRN01 V0 1

Exhibit 08 Users Manual

Download: Sercomm SZSRN01 ZigBee Siren Repeater User Manual SZ SRN01  V0 1
Mirror Download [FCC.gov]Sercomm SZSRN01 ZigBee Siren Repeater User Manual SZ SRN01  V0 1
Document ID1800943
Application IDz9LuaMSZM3gVSp5E0oh53g==
Document DescriptionExhibit 08 Users Manual
Short Term ConfidentialNo
Permanent ConfidentialNo
SupercedeNo
Document TypeUser Manual
Display FormatAdobe Acrobat PDF - pdf
Filesize66.97kB (837130 bits)
Date Submitted2012-09-25 00:00:00
Date Available2012-09-25 00:00:00
Creation Date2012-09-18 10:59:02
Producing SoftwareAcrobat Distiller 9.0.0 (Windows)
Document Lastmod2012-09-18 10:59:02
Document TitleMicrosoft Word - SZ-SRN01 user manual_V0.1.doc
Document CreatorPScript5.dll Version 5.2.2
Document Author: kayla.lin

SZ-SRN01
ZigBee Siren Repeater
User Guide
Table of Contents
CHAPTER 1 INTRODUCTION .............................................................................................. 1
Package Contents .............................................................................................................. 1
Specification....................................................................................................................... 1
CHAPTER 2 .............................................................................................................................. 2
DEVICE DESCRIPTION.......................................................................................................... 2
Components ....................................................................................................................... 2
Installation ......................................................................................................................... 3
Operation ........................................................................................................................... 3
REGULATORY APPROVAL.................................................................................................. 4
FCC Statement .................................................................................................................. 4
CE Approval .................................................................................. 錯誤! 尚未定義書籤。
Copyright 2012. All Rights Reserved.
Document Version: 1.0
All trademarks and trade names are the properties of their respective owners.
Chapter 1
Introduction
This Chapter provides an overview of the ZigBee Siren Repeater features and
capabilities.
Congratulations on the purchase of your new ZigBee Siren Repeater. The ZigBee
Siren Repeater is a consumer electronic device, which is used for home automation
and security.
Package Contents
The following items should be included:

SZ-SRN01 x 1 pcs

CR123A Lithium Battery x 1 pcs

Screws for Wall mount x 1 pcs

Quick installation guide x 1 pcs
If any of the above items are damaged or missing, please contact your dealer immediately.
Specification
Frequency: 2.4GHz
Battery type: DC 3V, CR123A Lithium Battery
Power Source: AC110V
Low Battery detection: under DC2.7V
85dB / 3 Meter piezo Siren.
Operating temperature: 0° - 50°C (32° - 122°F);
Storage temperature: -20° - 70°C (-4° - 158°F)
LED indicator for Power and RF Tamper Alarm
Dimensions :
129 mm x 80 mm x 43 mm (5.07" x 3.15" x 1.7")
Chapter 2
Device Description
This Chapter provides device description for the ZigBee Siren Repeater
Components
Components
Back Drawing
Front Drawing
Installation
1. Remove the battery cover from siren. Observe correct polarity before insert batteries.
Operation
1. Join Function
For "Join" a network, please do the following instruction

Press the Join/Leave button for less than 1 second. The LED is blinking while
processing. If the sensor has been joined with the controller successfully, the
Green LED will be on for 2 seconds and then off. The Green LED will be off
instantly if failed.
2. Leave Function

For "Leave" a network, please do the following instruction

Press Join/Leave button for 3 seconds to let the sensor disassociate from the
controller.

The LED will stay off during the normal operation.

The sensor is equipped with a tamper switch. If the cover of sensor is removed,
the sensor will send an alarm to the ZigBee controller. The sensor will be in
"Awake" mode before replacing the cover.
Chapter 3
REGULATORY APPROVAL
FCC Statement
This equipment has been tested and found to comply with the limits for a Class B
digital device, pursuant to part 15 of the FCC rules. These limits are designed to
provide reasonable protection against harmful interference in a residential installation.
This equipment generates, uses and can radiate radio frequency energy and, if not
installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will
not occur in a particular installation. If this equipment does cause harmful interference
to radio or television reception, which can be determined by turning the equipment off
and on, the user is encouraged to try to correct the interference by one or more of the
following measures:
-Reorient or relocate the receiving antenna.
-Increase the separation between the equipment and receiver.
-Connect the equipment into an outlet on a circuit different from that to which the
receiver is connected.
-Consult the dealer or an experienced radio/TV technician for help.
You are cautioned that changes or modifications not expressly approved by the party
responsible for compliance could void your authority to operate the equipment.
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference and (2) this
device must accept any interference received, including interference that may cause
undesired operation
This Transmitter must not be co-located or operating in conjunction with any other
antenna or transmitter.
This equipment complies with FCC RF radiation exposure limits set forth for an uncontrolled environment . This equipment should be installed and operated with a minimum
distance of 20 centimeters between the radiator and your body.

Source Exif Data:
File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.5
Linearized                      : Yes
Author                          : kayla.lin
Create Date                     : 2012:09:18 10:59:02+08:00
Modify Date                     : 2012:09:18 10:59:02+08:00
XMP Toolkit                     : Adobe XMP Core 4.2.1-c043 52.372728, 2009/01/18-15:08:04
Creator Tool                    : PScript5.dll Version 5.2.2
Producer                        : Acrobat Distiller 9.0.0 (Windows)
Format                          : application/pdf
Title                           : Microsoft Word - SZ-SRN01 user manual_V0.1.doc
Creator                         : kayla.lin
Document ID                     : uuid:898cd02c-ffc8-4427-a85f-f02fa7fe50af
Instance ID                     : uuid:0a074f12-eee2-4547-9dc5-8f5f92517593
Page Count                      : 8
EXIF Metadata provided by EXIF.tools
FCC ID Filing: P27SZSRN01

Navigation menu