Servis Rhino Lawn Mower 14812 Users Manual SE15 4A SE10 4A.p65
!! Servis-Rhino-21 Servis Lawn Mower Manuals - Lawn Mower Manuals – The Best Lawn Mower Manuals Collection
SE10-4A to the manual 419b6a70-1218-4b78-bff2-be0d40a64ce2
2015-02-02
: Servis-Rhino Servis-Rhino-Lawn-Mower-14812-Users-Manual-490792 servis-rhino-lawn-mower-14812-users-manual-490792 servis-rhino pdf
Open the PDF directly: View PDF 
.
Page Count: 72
| Download | |
| Open PDF In Browser | View PDF |
SE10-4A/SE15-4A FLEX-WING MECHANICAL LEVEL LIFT ROTARY MOWER P/N 00777391MB Published 08-06 MASTER PARTS BOOK S/N 14812 TO CURRENT PARTS LISTING Rhino® An Alamo Group Company 1020 S. Sangamon Ave. Gibson City, Il 60936 1-800-446-5158 Email: parts@servis-rhino.com © 2006 Alamo Group Inc. TO THE OWNER/OPERATOR/DEALER All implements with moving parts are potentially hazardous. There is no substitute for a cautious, safe-minded operator who recognizes the potential hazards and follows reasonable safety practices. The manufacturer has designed this implement to be used with all its safety equipment properly attached to minimize the chance of accidents. BEFORE YOU START!! Read the safety messages on the implement and shown in your manual. Observe the rules of safety and common sense! WARRANTY INFORMATION: Read and understand the complete Warranty Statement found in this Manual. Fill out the Warranty Registration Form in full and return it within 30 Days. Make certain the Serial Number of the Machine is recorded on the Warranty Card and on the Warranty Form that you retain. The use of "will-fit" parts will void your warranty and can cause catastrophic failure with possible injury or death. PARTS SECTION Parts Section – 1 PARTS ORDERING GUIDE The following instructions are offered to help eliminate needless delay and error in processing purchase orders for the equipment in this section. 1. The Parts Section is prepared in logical sequence and grouping of parts that belong to the basic machine featured in this manual. Part Numbers and Descriptions are given to help locate the parts and quantities required. 2. The Purchase Order must include the name and address of the person or organization ordering the parts, who should be charged, and if possible, the serial number of the machine for which the parts are ordered. 3. The Purchase Order must clearly list the quantity of each part, the complete and correct part number (be sure to include all periods), and the basic name of the part. 4. The Manufacturer reserves the right to substitute parts where applicable. 5. Some parts are unlisted items which are special production items not normally stocked and are subject to special handling. Request a quotation for such parts before sending a Purchase Order. 6. The Manufacturer reserves the right to change prices without prior notice. NOTE: Please refer to The Safety Section in the front of this Manual for the proper Part Number when ordering Replacement Safety Decals. For maximum safety and to guarantee optimum product reliability, always use genuine Servis-Rhino Parts. The use of inferior replacement parts may cause premature or catastrophic failure which could result in serious injury or death. Direct any questions regarding parts to: RHINO ® 1020 S. Sangamon Ave. Gibson City, IL 60936 800-446-5158 Email: parts@servis-rhino.com ©2006 Alamo Group Inc. Parts Section – 2 PART NAME INDEX AXLE ASSEMBLY S/N 14812 - CURRENT AUG 2002 - CURRENT.................................................................................... 4 AXLE ATTACHMENT S/N 14812 - CURRENT AUG 2002 - CURRENT............................................................................... 5 BAFFLE ASSEMBLY S/N 14812 - CURRENT - AUG 2002 - CURRENT ............................................................................. 6 BLADE PAN ASSEMBLY S/N 14812 - CURRENT AUG 2002 - CURRENT......................................................................... 7 CHAINGUARD ASSEMBLY - FRONT S/N 14812 - CURRENT AUG 2002 - CURRENT ..................................................... 8 CHAINGUARD ASSEMBLY - REAR S/N 14812 - CURRENT AUG 2002 - CURRENT ....................................................... 9 CYLINDER ASSEMBLY - CENTER S/N 14812 - CURRENT - AUG 2002 - CURRENT .................................................... 10 CYLINDER ASSEMBLY - WING S/N 14812 - CURRENT AUG 2002 - CURRENT ........................................................... 11 CYLINDER ATTACHMENT - CENTER S/N 14812 - CURRENT AUG 2002 - CURRENT ................................................. 12 CYLINDER ATTACHMENT - WING S/N 14812 - CURRENT AUG 2002 - CURRENT ...................................................... 13 DEFLECTOR ASSEMBLY - FRONT S/N 14812 - CURRENT AUG 2002 - CURRENT .................................................... 14 DEFLECTOR ASSEMBLY - REAR S/N 14812 - CURRENT AUG 2002 - CURRENT........................................................ 15 DRIVELINE ASSEMBLY - CV 1-3/4-20 CAT 5 1000 RPM S/N 14812 - CURRENT AUG 2002 - CURRENT ................... 17 DRIVELINE ASSEMBLY - CV 1-3/8-21 CAT 5 1000 RPM S/N 14812 - CURRENT AUG 2002 - CURRENT ................... 16 DRIVELINE ASSEMBLY - CV 1-3/8-6 CAT 5 540 RPM S/N 14812 - CURRENT AUG 2002 - CURRENT ....................... 21 DRIVELINE ASSEMBLY - INTERMEDIATE S/N 14812 - CURRENT AUG 2002 - CURRENT.......................................... 18 DRIVELINE ASSEMBLY - WING 1-3/4-20 CAT 4 S/N 14812 - CURRENT AUG 2002 - CURRENT................................. 19 DRIVELINE ASSEMBLY - WING 1-3/4-20 CAT 5 S/N 14812 - CURRENT AUG 2002 - CURRENT................................. 20 GEARBOX ASSEMBLY - CENTER & LEFT 540 RPM S/N 14812 - 17107 AUG 2002 - MAR 2005 ................................. 22 GEARBOX ASSEMBLY - CENTER & LEFT 540 RPM S/N 17108 - CURRENT APR 2005 - CURRENT ......................... 24 GEARBOX ASSEMBLY - CENTER 1000 RPM S/N 14812 - 17107 AUG 2002 - MAR 2005............................................. 26 GEARBOX ASSEMBLY - CENTER 1000 RPM S/N 17108 - CURRENT APR 2005 - CURRENT ..................................... 28 GEARBOX ASSEMBLY - DIVIDER 1000 RPM S/N 14812 - CURRENT AUG 2002 - CURRENT..................................... 30 GEARBOX ASSEMBLY - DIVIDER 540 RPM S/N 14812 - CURRENT AUG 2002 - CURRENT...................................... 32 GEARBOX ASSEMBLY - LEFT WING 1000 RPM S/N 14812 - 17107 AUG 2002 - MAR 2005........................................ 34 GEARBOX ASSEMBLY - LEFT WING 1000 RPM S/N 17108 - CURRENT APR 2005 - CURRENT ................................ 36 GEARBOX ASSEMBLY - RIGHT WING 1000 RPM S/N 14812 - 17107 AUG 2002 - MAR 2005 ..................................... 38 GEARBOX ASSEMBLY - RIGHT WING 1000 RPM S/N 17108 - CURRENT APR 2005 - CURRENT.............................. 40 GEARBOX ASSEMBLY - RIGHT WING 540 RPM S/N 14812 - 17107 AUG 2002 - MAR 2005 ....................................... 42 GEARBOX ASSEMBLY - RIGHT WING 540 RPM S/N 17108 - CURRENT APR 2005 - CURRENT................................ 44 GEARBOX SHIELD ATTACHMENT - DIVIDER S/N 14812 - CURRENT AUG 2002 - CURRENT.................................... 46 GEARBOX SHIELD ATTACHMENT - WING & CENTER 14812 - CURRENT AUG 2002 - CURRENT ............................ 47 HITCH - PINTLE HOOK S/N 14812 - CURRENT AUG 2002 - CURRENT......................................................................... 48 HYDRAULIC CONTROL VALVE S/N 14812 - CURRENT AUG 2002 - CURRENT ........................................................... 49 HYDRAULIC CONTROL VALVE W/MOUNTING KIT S/N 14812 - CURRENT AUG 2002 - CURRENT ........................... 50 HYDRAULIC SCHEMATIC SN 14812 - CURRENT AUG 2002 - CURRENT ..................................................................... 51 LEVEL ROD ASSEMBLY S/N 14812 - CURRENT AUG 2002 - CURRENT....................................................................... 52 SKID SHOE ATTACHMENT S/N 14812 - CURRENT AUG 2002 - CURRENT .................................................................. 53 SLIPCLUTCH ASSEMBLY - INTERMEDIATE S/N 14812 - CURRENT AUG 2002 - CURRENT ...................................... 54 SLIPCLUTCH ASSEMBLY - WING CAT 4 S/N 14812 - CURRENT AUG 2002 - CURRENT............................................ 55 SLIPCLUTCH ASSEMBLY - WING CAT 5 S/N 14812 - CURRENT AUG 2002 - CURRENT............................................ 56 SMV SIGN MOUNTING S/N 14812 - CURRENT AUG 2002 - CURRENT ......................................................................... 57 TIRE OPTION - FOAM FILLED USED AIRCRAFT S/N 14812 - CURRENT AUG 2002 - CURRENT............................... 59 TIRE OPTION S/N 14812 - CURRENT AUG 2002 - CURRENT ........................................................................................ 58 TONGUE ASSEMBLY S/N 14812 - CURRENT AUG 2002 - CURRENT............................................................................ 60 WEIGHT BOX ATTACHMENT S/N 14812 - CURRENT AUG 2002 - CURRENT............................................................... 61 WHEEL HUB ASSEMBLY S/N 14812 - 16663 AUG 2002 - DEC 2004.............................................................................. 62 WHEEL HUB ASSEMBLY S/N 16664 - CURRENT JAN 2005 - CURRENT ..................................................................... 63 WINCH AND STAND ASSEMBLY S/N 14812 - CURRENT AUG 2002 - CURRENT......................................................... 64 WING ATTACHMENT S/N 14812 - CURRENT AUG 2002 - CURRENT ............................................................................ 65 SE15-4A Master Parts Book (Aug-06) ©2006 Alamo Group Inc. Parts Section – 3 AXLE ASSEMBLY S/N 14812 - CURRENT AUG 2002 - CURRENT ITEM PART NO. QTY. DESCRIPTION 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 00777183 00777181 00777182 00763449 00764375 00001800 00009500 00751584 00037200 00763447 00763962 00763450A 02012200 02152800 00780848 00750940 1 1 1 2 4or6 4or6 4 4 4 1 1 1 1 2 1 2 CENTER AXLE WELDMENT RH WING AXLE WELDMT LH WING AXLE WELDMENT ASSY-CONTROL-ROD HHCS 1/2NC X 3-1/4 PL5 LOCKNUT TLM 1/2 NC PLB BOLT-HEX 3/4 NC 4-1/2 PL5 SPACER TUBE NUT TOPLOCK 3/4 NC PLC TOP LINK,THREADED WLDMT-TOP LINK TURNBUCKLE,1-1/8NC THRD 2 HOLE NUT HEX 1-1/8 NC PL HEXB 5/16 NC 2-1/2PL FITTING, GREASE 1/8" BSP, ST NUT TOPLOCK 5/16 NC PLB SE15-4A Master Parts Book (Aug-06) ©2006 Alamo Group Inc. Parts Section – 4 AXLE ATTACHMENT S/N 14812 - CURRENT AUG 2002 - CURRENT ITEM PART NO. QTY. DESCRIPTION 1 2 3 4 5 6 7 8 317918H5C 02030300 7AH121022 00002700 511016 00037200 00777189 02881000 2 2 2 8 2 4 2 2 HEX CAP 1-8 X 7 1/2 GR.5 NUT TOPLOCK 1 NC PLB HHCS 3/4-10NC 2-3/4 PL5 FLATWASHER 1/2 PL STD BUSHING NUT TOPLOCK 3/4 NC PLC AXLE BUSHING HHCS 3/4 NC 3-1/2 PL5 SE15-4A Master Parts Book (Aug-06) ©2006 Alamo Group Inc. Parts Section – 5 BAFFLE ASSEMBLY S/N 14812 - CURRENT - AUG 2002 - CURRENT ITEM PART NO. QTY. DESCRIPTION 1 2 3 4 5 6 7 8 00773850A 00773805 00773806 00748823 00001800 00773990 00773802 00773798 00773799 1 1 30 30 30 2 1 1 BAFFLE, ASY WLDMT BAFFLE CTR WING LF SIDE WLDMT BAFFLE CTR WING RT SIDE HHCS 1/2-13UNC 1-1/2 PL5 LOCKNUT TLM 1/2 NC PLB WASHER 9/16X2X1/4 WLDMT BAFFLE FOR WING WLDMT BAFFLE WING CTR LF SIDE WLDMT BAFFLE WING CTR RT SIDE SE15-4A Master Parts Book (Aug-06) ©2006 Alamo Group Inc. Parts Section – 6 BLADE PAN ASSEMBLY S/N 14812 - CURRENT AUG 2002 - CURRENT ITEM PART NO. QTY. DESCRIPTION 1 2 3 4 5 6 7 8 9 10 11 12 13 00750311 00753753 00756077 00775240 00775241 00775242 00775244 02956948 8251 00758579 9216 5JRC16140 00775233 00775267 00776973 4 2 6 1 1 1 1 6 2 2 2 2 1 1 1 HEXB,5/8NC X 3-1/2,ZP,GRD5 HEXB 5/8 NC 2 PL 8 WASHER,5/8 HARDENED BAR,BLADE FORMED BAR,BLADE UNFORMED PAN,BLADE HUB BLADE LOCKNUT 5/8 NC PLC BLADE BOLT SPECIAL WASHER-BLADE WASHER, 1 STRUCTURAL LOCKNUT 1 -14 TLDT GC ZP BLADE,CCW FAN 27-1/2 BLADE,CCW FAN 21-1/2 BLADE, CW FAN 22 1/2 NOTE: Items 1-8 are apart of Blade Pan Assembly (00776428) SE15-4A Master Parts Book (Aug-06) ©2006 Alamo Group Inc. Parts Section – 7 CHAINGUARD ASSEMBLY - FRONT S/N 14812 - CURRENT AUG 2002 - CURRENT ITEM PART NO. QTY. DESCRIPTION 1 2 3 4 5 00756986 00773024 00773022 02030700 4526 2 2 1 21 21 WING CHAIN GUARD ASSY CHAINGUARD, ASY, BLACK CHAINGUARD, ASY, BLACK HHCS 1/2-13UNC 1-1/4 PL5 NUT LOCK FLG WHIZ 1/2-13 NC PL --Service Assemblies Only-- SE15-4A Master Parts Book (Aug-06) ©2006 Alamo Group Inc. Parts Section – 8 CHAINGUARD ASSEMBLY - REAR S/N 14812 - CURRENT AUG 2002 - CURRENT ITEM PART NO. QTY. DESCRIPTION 1 2 3 4 00780200 00773018 02030700 4526 1 4 14 14 ASSY, REAR CENTER CHAINGUARD CHAINGUARD, ASY, BLACK HHCS 1/2-13UNC 1-1/4 PL5 NUT LOCK FLG WHIZ 1/2-13 NC PL --Service Assemblies Only-- SE15-4A Master Parts Book (Aug-06) ©2006 Alamo Group Inc. Parts Section – 9 CYLINDER ASSEMBLY - CENTER S/N 14812 - CURRENT - AUG 2002 - CURRENT ITEM 1 2 3 4 5 6 9 15 16 17 18 19 20 21 PART NO. QTY. DESCRIPTION 8727A 00774729 00774734 00774730 00774753 3047111 3047112 00774760 3047117 1917140 00774740 33003H5C 5JRC12160 1917132 2417154 651132 94514 0652141311 8354 00606000 1 1 1 1 1 4 1 1 1 1 8 1 1 1 2REF 2REF 2REF 2REF 2REF CYLINDER HYD 2-1/2 8 CLEVIS CAP 2.5-3/4 ORB-1.00 ROD CAP 2.50-1.25-3/4 ORB PISTON 2.5-0.75-S HALL W/RING ROD CYL 1.25-08-0.75-1.25-A CYLINDER TUBE TIE ROD SEAL KIT THREAD LOCK ROD CLEVIS SC SCKT SET 3/8UNCX1/2 KNUR HEX NUT 3/8-16 GR.5 NUT TOPLOCK 3/4 NF PLC SCKT HD O-RNG PLUG,3/4-16 UNF, BREATHER,CYLINDER #8 ORB HOSE #6 - 8MP - 8MP - 144LG ADAPTER, HYD, ELBOW SWIVEL ADP HYD STGHT 8MB - 8FP PIN-HYD. CYLINDER PIN-COTTER 3/16 X 2 --Stroke 8.00 Retracted 20.25 Extended 28.25-- SE15-4A Master Parts Book (Aug-06) ©2006 Alamo Group Inc. Parts Section – 10 CYLINDER ASSEMBLY - WING S/N 14812 - CURRENT AUG 2002 - CURRENT ITEM 1 2 3 4 5 6 9 15 16 17 18 19 20 21 PART NO. QTY. DESCRIPTION 8728A 00774729 00774734 00774730 00775728 00774746 00774744 00774760 3047117 1917140 00774740 33003H5C 5JRC12160 1917132 2417154 651132 94514 0652141311 8354 00606000 1 1 1 1 1 4 1 1 1 1 8 1 1 1 2REF 2REF 2REF 2REF 2REF CYLINDER HYD 2-1/2 X 14 CLEVIS CAP 2.5-3/4 ORB-1.00 ROD CAP 2.50-1.25-3/4 ORB PISTON 2.5-0.75-S HALL W/RING ROD CYL 1.25-14-0.75-1.12 TUBE CYL 2.00-14.00 TIE ROD 3/8-14 SEAL KIT THREAD LOCK ROD CLEVIS SC SCKT SET 3/8UNCX1/2 KNUR HEX NUT 3/8-16 GR.5 NUT TOPLOCK 3/4 NF PLC SCKT HD O-RNG PLUG,3/4-16 UNF, BREATHER,CYLINDER #8 ORB HOSE #6 - 8MP - 8MP - 144LG ADAPTER, HYD, ELBOW SWIVEL ADP HYD STGHT 8MB - 8FP PIN-HYD. CYLINDER PIN-COTTER 3/16 X 2 --Stroke 14.00 Retracted 24.25 Extended 38.25-- SE15-4A Master Parts Book (Aug-06) ©2006 Alamo Group Inc. Parts Section – 11 CYLINDER ATTACHMENT - CENTER S/N 14812 - CURRENT AUG 2002 - CURRENT ITEM PART NO. QTY. DESCRIPTION 1 2 3 4 5 6 7 8 9 10 11 12 13 8325 8336 00759668 8306 8326 00012300 8349 00606000 8350 8351 9216 103266 00777963 1 1 1 1 1 2 1 6 1 1 2 1 1 CYL.SPRING ARM ASSEMBLY SPRING STOP ASSEMBLY SPRING STOP-INNER SPRING COMPRESSION SPRING ROD ASSEMBLY NUT, 7/8 NC HEX PL PIN ASSEMBLY WELD PIN-COTTER 3/16 X 2 PIN ASSEMBLY PIN WASHER, 1 STRUCTURAL CYLINDER PIN PLATE, TRANSPORT LOCK SE15-4A Master Parts Book (Aug-06) ©2006 Alamo Group Inc. Parts Section – 12 CYLINDER ATTACHMENT - WING S/N 14812 - CURRENT AUG 2002 - CURRENT ITEM PART NO. QTY. DESCRIPTION 1 2 3 4 5 6 8352 00606000 9216 00761503 37107B13 8345 4 8 4 4 2 2 PIN ASSEMBLY PIN-COTTER 3/16 X 2 WASHER, 1 STRUCTURAL SPACER 1-1/2 OD X1ID X 1/2LG CLIP-X HAIR PIN TRANSPORT BAR SE15-4A Master Parts Book (Aug-06) ©2006 Alamo Group Inc. Parts Section – 13 DEFLECTOR ASSEMBLY - FRONT S/N 14812 - CURRENT AUG 2002 - CURRENT ITEM PART NO. QTY. DESCRIPTION 1 2 3 4 5 6 7 8 9 10 00767872 00772063 00767871 00773015 02030700 00002700 00001800 00759859 00773882 00773883 1 1 2 2 21 21 21 2 2 2 SHIELD, FRONT DEFLECTOR FLAT, FRONT DEFLECTOR SUPPORT SHIELD, DEFLECTOR 19 BAR SUPPORT DEFLECTOR 19 HHCS 1/2-13UNC 1-1/4 PL5 FLATWASHER 1/2 PL STD LOCKNUT TLM 1/2 NC PLB SHIELD-DEBRIS DEFLECTOR FRT. PLATE FOOT PROBE GUARD BAR DEFLECTOR SUPPORT SE15-4A Master Parts Book (Aug-06) ©2006 Alamo Group Inc. Parts Section – 14 DEFLECTOR ASSEMBLY - REAR S/N 14812 - CURRENT AUG 2002 - CURRENT ITEM PART NO. QTY. DESCRIPTION 1 2 3 4 5 6 7 00772064 00772063 00773014 00773015 02030700 00002700 00001800 2 2 4 4 14 14 14 SHIELD,FRONT DEFLECTOR FLAT, FRONT DEFLECTOR SUPPORT SHIELD DEFLECTOR FRONT 19 BAR SUPPORT DEFLECTOR 19 HHCS 1/2-13UNC 1-1/4 PL5 FLATWASHER 1/2 PL STD LOCKNUT TLM 1/2 NC PLB SE15-4A Master Parts Book (Aug-06) ©2006 Alamo Group Inc. Parts Section – 15 DRIVELINE ASSEMBLY - CV 1-3/8-21 CAT 5 1000 RPM S/N 14812 - CURRENT AUG 2002 - CURRENT ITEM 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 PART NO. QTY. DESCRIPTION 00760453 8478 8482 8382 7432 8484 8384 00760632 8489 00774207 8486 8393 00760641 7420 8949 00778479 1416438 00756005 00756004 8974 00775820 00775821 8391 00774208 00760665 00760667 1 1 1 1 2 2 1 1 1 1 1 1 1 1 1 8 1 1 1 1 1 1 1 1 1 DRIVELINE,1000 CV CAT5 1-3/8YOKE 1-3/8 21-SP DOUBLE YOKE FITTING,GREASE M8 X 1 YOKE-INBOARD CROSS & BEARING KIT SPRING PIN 10MM X 90MM PROFILE-INNER SAGA INBOARD YOKE YOKE 1-3/4-20 SPLINE CROSS & BEARING KIT BEARING RING TUBE,INNER SHIELD ROUND ASSY-BEARING & CV CONE SHIELD CONE GREASE ZERK 1/4"-28 UNF 2A THR SCREW-SC25 DECAL-ROTATING DRIVELINE DECAL-SHIELD MISSING SUPPORT BEARING OUTER SHIELD HALF INNER SHIELD HALF Q.D. COLLAR KIT LOCK ASY CC YOKE DRIVELINE-TRACTOR HALF PART OF DRIVELINE IMPLEMENT HALF PART SE15-4A Master Parts Book (Aug-06) ©2006 Alamo Group Inc. Parts Section – 16 DRIVELINE ASSEMBLY - CV 1-3/4-20 CAT 5 1000 RPM S/N 14812 - CURRENT AUG 2002 - CURRENT ITEM 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 PART NO. QTY. DESCRIPTION 00763554 00761434 8482 8382 7432 8484 8384 00763557 00763558 8489 00774207 8486 8393 00763560 00763559 7420 8949 00778479 1416438 00756005 00756004 8974 00775824 00775825 00759556 00774208 00763555 00763556 1 1 1 1 2 2 1 1 1 1 1 2 1 1 1 1 1 8 1 1 1 1 1 1 1 1 1 D/L CV 1-3/4-20 SPL (20DB) YOKE-CV QD-1 3/4-20 SPLINEDOUBLE YOKE FITTING,GREASE M8 X 1 YOKE-INBOARD CROSS & BEARING KIT SPRING PIN 10MM X 90MM PROFILE, STAR INNER PROFILE,STAR OUTER INBOARD YOKE YOKE 1-3/4-20 SPLINE CROSS & BEARING KIT BEARING RING TUBE,OUTER SHIELD TUBE,D/L INNER SHIELD ASSY-BEARING & CV CONE SHIELD CONE GREASE ZERK 1/4"-28 UNF 2A THR SCREW-SC25 DECAL-ROTATING DRIVELINE DECAL-SHIELD MISSING SUPPORT BEARING OUTER SHIELD HALF INNER SHIELD HALF KIT, SLIDE COLLAR LOCK ASY CC YOKE D/L TRACTOR HALF 1-3/4-20 CV D/L IMPLEMENT HALF 1-3/4-20 SE15-4A Master Parts Book (Aug-06) ©2006 Alamo Group Inc. Parts Section – 17 DRIVELINE ASSEMBLY - INTERMEDIATE S/N 14812 - CURRENT AUG 2002 - CURRENT ITEM PART NO. QTY. DESCRIPTION 1 2 3 4 5 00775340 00775341 W279R 00775342 00775333 00775331 1 2 1 1 1 DRIVESHAFT INTERMEDIATE SE15 YOKE 1-3/4-20 SPLINE CROSS REPAIR KIT, CTR DOUBLE YOKE FLANGE YOKE CLUTCH FRICTION SE15-4A Master Parts Book (Aug-06) ©2006 Alamo Group Inc. Parts Section – 18 DRIVELINE ASSEMBLY - WING 1-3/4-20 CAT 4 S/N 14812 - CURRENT AUG 2002 - CURRENT ITEM PART NO. QTY. DESCRIPTION 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 00775316 00189700 00756934 00775317 00775375 00775376 00775318 00775315 8393 00756005 00756004 00759217 8974 1416601 00775384 00775327 00775319 00775320 00775313 00775314 1 2 2 1 1 1 1 1 2 1 1 2 1 1 2 1 1 1 1 1 YOKE 1-3/4-20 SPL I.C. CROSSKIT PIN,ROLL 10 X 80 YOKE INBOARD 1B INNER PROFILE 1B PROFILE & SLEEVE W.A. YOKE INBOARD 2A CLUTCH FRICTION BEARING RING DECAL-ROTATING DRIVELINE DECAL-SHIELD MISSING SCREW 1/2 LG END SUPPORT BEARING ZERK BOLT P1.75 M12 X 60 NUT P1.75 M12 SHIELD OUTER HALF SHIELD INNER HALF DRIVELINE TRACTOR HALF CAT 4 DRIVELINE IMPLEMENT HALF CAT 4 SE15-4A Master Parts Book (Aug-06) ©2006 Alamo Group Inc. Parts Section – 19 DRIVELINE ASSEMBLY - WING 1-3/4-20 CAT 5 S/N 14812 - CURRENT AUG 2002 - CURRENT ITEM PART NO. QTY. DESCRIPTION 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 00775343 00775005 W840 W816F 00775344 00775382 00775345 00775346 00775347 00775348 7387 00756004 00752670 00774208 00775349 00775350 1 2 1 1 1 1 1 4 1 1 1 2 1 1 1 DRIVELINE WNG CAT5 SC 1-3/4 20 YOKE 44R 1-3/4-20 TAPER PIN CROSS REPR KIT YOKE & SQ SHFT PAINT BLACK YOKE, I.B. TUBE & SLEEVE W.A. FRICTION CLUTCH OUTER SHIELD TUBE ASSY INNER SHIELD TUBE ASSY SHIELD BEARING SUPPORT BEARING DECAL, DECK U-JOINT DECAL-SHIELD MISSING GREASE FITTING 1/4-28 BOLT THD LOCK ASY CC YOKE DRIVELINE WING INNER SHAFT DRIVELINE WING OUTER TUBE SE15-4A Master Parts Book (Aug-06) ©2006 Alamo Group Inc. Parts Section – 20 DRIVELINE ASSEMBLY - CV 1-3/8-6 CAT 5 540 RPM S/N 14812 - CURRENT AUG 2002 - CURRENT ITEM 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 PART NO. QTY. DESCRIPTION 00760452 7431 8482 8382 7432 8484 8384 00760632 8489 00774207 8486 8393 00760641 7420 8949 00778479 1416438 00756005 00756004 8974 00775820 00775821 8391 00774208 00760668 00760667 1 1 1 1 2 2 1 1 1 1 2 1 1 1 1 8 1 1 1 1 1 1 1 1 1 DRIVELINE,540 CV CAT 5 1-3/8-6 YOKE SLIDE COLLAR DOUBLE YOKE FITTING,GREASE M8 X 1 YOKE-INBOARD CROSS & BEARING KIT SPRING PIN 10MM X 90MM PROFILE-INNER SAGA INBOARD YOKE YOKE 1-3/4-20 SPLINE CROSS & BEARING KIT BEARING RING TUBE,INNER SHIELD ROUND ASSY-BEARING & CV CONE SHIELD CONE GREASE ZERK 1/4"-28 UNF 2A THR SCREW-SC25 DECAL-ROTATING DRIVELINE DECAL-SHIELD MISSING SUPPORT BEARING OUTER SHIELD HALF INNER SHIELD HALF Q.D. COLLAR KIT LOCK ASY CC YOKE DRIVELINE TRACTOR HALF PART OF DRIVELINE IMPLEMENT HALF PART SE15-4A Master Parts Book (Aug-06) ©2006 Alamo Group Inc. Parts Section – 21 GEARBOX ASSEMBLY - CENTER & LEFT 540 RPM S/N 14812 - 17107 AUG 2002 - MAR 2005 SE15-4A Master Parts Book (Aug-06) ©2006 Alamo Group Inc. Parts Section – 22 GEARBOX ASSEMBLY - CENTER & LEFT 540 RPM S/N 14812 - 17107 AUG 2002 - MAR 2005 ITEM PART NO. QTY. DESCRIPTION 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 00775919 00775921 00755954 00758659 00758664 00758689 00758653 00758667 00758668 00758646 00758647 00759977 00775923 00758663 00758672 02959661 00775244 00606000 00758692 00758674 00758676 00758677 00775922 00769938 00758693 00762121 00770421 00755615 00770737 00769321 00758657 00758694 00762114 1 8 8 1 1 1 VAR VAR VAR VAR 1 1 1 4 4 1 1 1 1 VAR VAR 1 2 1 1 1 2 2 3 1 1 1 GEARBOX SUPER 75 1:1.46 SU G/B HOUSING SUPER 75 LOCKWASHER M10 HHCS, M10X1.5X32 CAP,INPUT SHAFT,INPUT SEAL, INPUT SHAFT SHIM .012 SHIM,0.020 SHIM, ADJUSTMENT .004 OR .1M SHIM, ADJUSTMENT .010 OR .25M SPACER GEAR MOUNT SPACER OUTPUT SUPER 75 CAP, OUTPUT LOCKWASHER,M12 HEXB METRIC 12-P1.75-35MMPL8.8 HUB BLADE PIN-COTTER 3/16 X 2 NUT,1-14 FLANGED HEX SLOTTED SEAL, OUTPUT SHAFT 50X70X10 GASKET, .004 OR .1M GASKET, .010 OR .25M SHAFT OUTPUT SUPER 75 BEARING,TIMKEN 30210 GEAR,13 TOOTH NUT,HEX THIN SLOTTED PIN, COTTER 3.6MM x 65MM BEARING LEVEL PLUG M18 X 1.5 WASHER,SEALING,17.8MX22MX3M SPACER,INPUT SHAFT GEAR,19 TOOTH PLUG,VENT W/WASHER 18M-P1.5 SE15-4A Master Parts Book (Aug-06) ©2006 Alamo Group Inc. Parts Section – 23 GEARBOX ASSEMBLY - CENTER & LEFT 540 RPM S/N 17108 - CURRENT APR 2005 - CURRENT SE15-4A Master Parts Book (Aug-06) ©2006 Alamo Group Inc. Parts Section – 24 GEARBOX ASSEMBLY - CENTER & LEFT 540 RPM S/N 17108 - CURRENT APR 2005 - CURRENT ITEM PART NO. QTY. DESCRIPTION 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 00775919A 00775921 00755954 00758659 00758664 00758689 00758653 00758667 00758668 00758646 00758647 00759977 00775923 00758663 00758672 02959661 00775244 00606000 00758674 00758692 00758676 00758677 00775922 00769938 00758693 00762121 00770421 00755615 00770737 00769321 00758657 00758694 00778907 00762114 1 8 8 1 1 1 VAR VAR VAR VAR 1 1 1 4 4 1 1 1 1 VAR VAR 1 2 1 1 1 2 2 2 1 1 1 1 SUPER AG-75S-1:1.46SU- 1 3/4"G/B HOUSING SUPER 75 LOCKWASHER M10 HHCS, M10X1.5X32 CAP,INPUT SHAFT,INPUT SEAL, INPUT SHAFT SHIM .012 SHIM,0.020 SHIM, ADJUSTMENT .004 OR .1M SHIM, ADJUSTMENT .010 OR .25M SPACER GEAR MOUNT SPACER OUTPUT SUPER 75 CAP, OUTPUT LOCKWASHER,M12 HEXB METRIC 12-P1.75-35MMPL8.8 HUB BLADE PIN-COTTER 3/16 X 2 SEAL, OUTPUT SHAFT 50X70X10 NUT,1-14 FLANGED HEX SLOTTED GASKET, .004 OR .1M GASKET, .010 OR .25M SHAFT OUTPUT SUPER 75 BEARING,TIMKEN 30210 GEAR,13 TOOTH NUT,HEX THIN SLOTTED PIN, COTTER 3.6MM x 65MM BEARING LEVEL PLUG M18 X 1.5 WASHER,SEALING,17.8MX22MX3M SPACER,INPUT SHAFT GEAR,19 TOOTH ASSY-DIPSTICK FOR SUPER 75 GBS PLUG,VENT W/WASHER 18M-P1.5 SE15-4A Master Parts Book (Aug-06) ©2006 Alamo Group Inc. Parts Section – 25 GEARBOX ASSEMBLY - CENTER 1000 RPM S/N 14812 - 17107 AUG 2002 - MAR 2005 SE15-4A Master Parts Book (Aug-06) ©2006 Alamo Group Inc. Parts Section – 26 GEARBOX ASSEMBLY - CENTER 1000 RPM S/N 14812 - 17107 AUG 2002 - MAR 2005 ITEM PART NO. QTY. DESCRIPTION 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 00776977 00775921 00755954 00758659 00758664 00758689 00758653 00758667 00758668 00758646 00758647 00759977 00775923 00758663 00758672 02959661 00775244 00606000 00758692 00758674 00758676 00758677 00775922 00769938 00759488 00770730 00770421 00755615 00770737 00769321 00758657 00759487 00762114 1 8 8 1 1 1 VAR VAR VAR VAR 1 1 1 4 4 1 1 1 1 VAR VAR 1 2 1 1 1 2 2 3 1 1 1 GEARBOX SUPER 75 1.21:1RD G/B HOUSING SUPER 75 LOCKWASHER M10 HHCS, M10X1.5X32 CAP,INPUT SHAFT,INPUT SEAL, INPUT SHAFT SHIM .012 SHIM,0.020 SHIM, ADJUSTMENT .004 OR .1M SHIM, ADJUSTMENT .010 OR .25M SPACER GEAR MOUNT SPACER OUTPUT SUPER 75 CAP, OUTPUT LOCKWASHER,M12 HEXB METRIC 12-P1.75-35MMPL8.8 HUB BLADE PIN-COTTER 3/16 X 2 NUT,1-14 FLANGED HEX SLOTTED SEAL, OUTPUT SHAFT 50X70X10 GASKET, .004 OR .1M GASKET, .010 OR .25M SHAFT OUTPUT SUPER 75 BEARING,TIMKEN 30210 GEAR, 17 TOOTH BEARING ADJUSTING NUT PIN, COTTER 3.6MM x 65MM BEARING LEVEL PLUG M18 X 1.5 WASHER,SEALING,17.8MX22MX3M SPACER,INPUT SHAFT GEAR, 14 TOOTH PLUG,VENT W/WASHER 18M-P1.5 SE15-4A Master Parts Book (Aug-06) ©2006 Alamo Group Inc. Parts Section – 27 GEARBOX ASSEMBLY - CENTER 1000 RPM S/N 17108 - CURRENT APR 2005 - CURRENT SE15-4A Master Parts Book (Aug-06) ©2006 Alamo Group Inc. Parts Section – 28 GEARBOX ASSEMBLY - CENTER 1000 RPM S/N 17108 - CURRENT APR 2005 - CURRENT ITEM PART NO. QTY. DESCRIPTION 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 00776977A 00775921 00755954 00758659 00758664 00758689 00758653 00758667 00758668 00758646 00758647 00759977 00775923 00758663 00758672 02959661 00775244 00606000 00758692 00758674 00758676 00758677 00775922 00769938 00759488 00762121 00770421 00755615 00770737 00769321 00758657 00759487 00778907 00762114 1 8 8 1 1 1 VAR VAR VAR VAR 1 1 1 4 4 1 1 1 1 VAR VAR 1 2 1 1 1 2 2 2 1 1 1 1 SUPER AG-75S-1.21:1RD- 1 3/4"G/B HOUSING SUPER 75 LOCKWASHER M10 HHCS, M10X1.5X32 CAP,INPUT SHAFT,INPUT SEAL, INPUT SHAFT SHIM .012 SHIM,0.020 SHIM, ADJUSTMENT .004 OR .1M SHIM, ADJUSTMENT .010 OR .25M SPACER GEAR MOUNT SPACER OUTPUT SUPER 75 CAP, OUTPUT LOCKWASHER,M12 HEXB METRIC 12-P1.75-35MMPL8.8 HUB BLADE PIN-COTTER 3/16 X 2 NUT,1-14 FLANGED HEX SLOTTED SEAL, OUTPUT SHAFT 50X70X10 GASKET, .004 OR .1M GASKET, .010 OR .25M SHAFT OUTPUT SUPER 75 BEARING,TIMKEN 30210 GEAR, 17 TOOTH NUT,HEX THIN SLOTTED PIN, COTTER 3.6MM x 65MM BEARING LEVEL PLUG M18 X 1.5 WASHER,SEALING,17.8MX22MX3M SPACER,INPUT SHAFT GEAR, 14 TOOTH ASSY-DIPSTICK FOR SUPER 75 GBS PLUG,VENT W/WASHER 18M-P1.5 SE15-4A Master Parts Book (Aug-06) ©2006 Alamo Group Inc. Parts Section – 29 GEARBOX ASSEMBLY - DIVIDER 1000 RPM S/N 14812 - CURRENT AUG 2002 - CURRENT SE15-4A Master Parts Book (Aug-06) ©2006 Alamo Group Inc. Parts Section – 30 GEARBOX ASSEMBLY - DIVIDER 1000 RPM S/N 14812 - CURRENT AUG 2002 - CURRENT ITEM PART NO. QTY. DESCRIPTION 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 00755698 00756643 00756644 00753226 00753224 00756645 00755746 00756646 00756647 00753232 00753237 00753238 00753235 00753241 00756648 00755068 00755070 00755745 00753239 00753231 00753230 00753240 00755069 00753223 00756649 2 2 2 2 2 2 2 2 1 2 2 2 1 1 1 1 1 1 6 6 1 1 2 2 DIVIDER GEARBOX SHAFT, 1-3/4-20 SPL WG OUTPUT SEAL,OIL 45X80X10 PLUG CIRCLIP, INTERNAL SHIM, 69X79.9 GEAR, SIDE BEVEL 1000 T25A G/B BEARING, BALL SHIM, 65.3X79.7 CASING INTERNAL CIRCLIP OIL SEAL SHIM BEARING SHAFT, 1-3/4-20 CTR SHAFT SHOULDER RING BEARING GEAR, CTR BEVEL, 1000 T25A G/B OIL FILLER PLUG SCHNORR WASHER HEXB METRIC 8-P1.25- 30MM PL5 COVER GASKET BEARING SNAP RING 40 UNI7436 .096 THK SE15-4A Master Parts Book (Aug-06) ©2006 Alamo Group Inc. Parts Section – 31 GEARBOX ASSEMBLY - DIVIDER 540 RPM S/N 14812 - CURRENT AUG 2002 - CURRENT SE15-4A Master Parts Book (Aug-06) ©2006 Alamo Group Inc. Parts Section – 32 GEARBOX ASSEMBLY - DIVIDER 540 RPM S/N 14812 - CURRENT AUG 2002 - CURRENT ITEM PART NO. QTY. DESCRIPTION 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 00756604 00756643 00756644 00753226 00773224 00563700 00772983 00753223 00756645 00753232 00753237 00753238 2716406 00753241 00756648 00755068 00753241 00772984 2716590 00753231 00753230 00753240 00756649 2 2 2 2 2 2 2 4 1 2 2 2 1 1 1 1 1 1 6 6 1 2 DIVIDER GEARBOX, COMER W/1-3/4 SHAFT, 1-3/4-20 SPL WG OUTPUT SEAL,OIL 45X80X10 PLUG CONVERSION KIT NEW STYLE D4 BEARING, BALL GEAR PINION Z20 20 TEETH BEARING SHIM, 69X79.9 CASING INTERNAL CIRCLIP OIL SEAL SHIM 84.7 BEARING SHAFT, 1-3/4-20 CTR SHAFT SHOULDER RING BEARING GEAR Z24 24 TEETH PLUG,VENT W/DIAPHRAM SCHNORR WASHER HEXB METRIC 8-P1.25- 30MM PL5 COVER SNAP RING 40 UNI7436 .096 THK SE15-4A Master Parts Book (Aug-06) ©2006 Alamo Group Inc. Parts Section – 33 GEARBOX ASSEMBLY - LEFT WING 1000 RPM S/N 14812 - 17107 AUG 2002 - MAR 2005 SE15-4A Master Parts Book (Aug-06) ©2006 Alamo Group Inc. Parts Section – 34 GEARBOX ASSEMBLY - LEFT WING 1000 RPM S/N 14812 - 17107 AUG 2002 - MAR 2005 ITEM PART NO. QTY. DESCRIPTION 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 00776978 00775921 00755954 00758659 00758664 00758689 00758653 00758667 00758668 00758646 00758647 00759977 00775923 00758663 00758672 02959661 00775244 00606000 00758692 00758674 00758676 00758677 00775922 00769938 00759488 00770730 00770421 00755615 00770737 00769321 00758657 00759487 00762114 1 8 8 1 1 1 VAR VAR VAR VAR 1 1 1 4 4 1 1 1 1 VAR VAR 1 2 1 1 1 2 2 3 1 1 1 GEARBOX SUPER 75 1:1.21SU G/B HOUSING SUPER 75 LOCKWASHER M10 HHCS, M10X1.5X32 CAP,INPUT SHAFT,INPUT SEAL, INPUT SHAFT SHIM .012 SHIM,0.020 SHIM, ADJUSTMENT .004 OR .1M SHIM, ADJUSTMENT .010 OR .25M SPACER GEAR MOUNT SPACER OUTPUT SUPER 75 CAP, OUTPUT LOCKWASHER,M12 HEXB METRIC 12-P1.75-35MMPL8.8 HUB BLADE PIN-COTTER 3/16 X 2 NUT,1-14 FLANGED HEX SLOTTED SEAL, OUTPUT SHAFT 50X70X10 GASKET, .004 OR .1M GASKET, .010 OR .25M SHAFT OUTPUT SUPER 75 BEARING,TIMKEN 30210 GEAR, 17 TOOTH BEARING ADJUSTING NUT PIN, COTTER 3.6MM x 65MM BEARING LEVEL PLUG M18 X 1.5 WASHER,SEALING,17.8MX22MX3M SPACER,INPUT SHAFT GEAR, 14 TOOTH PLUG,VENT W/WASHER 18M-P1.5 SE15-4A Master Parts Book (Aug-06) ©2006 Alamo Group Inc. Parts Section – 35 GEARBOX ASSEMBLY - LEFT WING 1000 RPM S/N 17108 - CURRENT APR 2005 - CURRENT SE15-4A Master Parts Book (Aug-06) ©2006 Alamo Group Inc. Parts Section – 36 GEARBOX ASSEMBLY - LEFT WING 1000 RPM S/N 17108 - CURRENT APR 2005 - CURRENT ITEM PART NO. QTY. DESCRIPTION 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 00776978A 00775921 00755954 00758659 00758664 00758689 00773640 00758667 00758668 00758646 00758647 00759977 00775923 00758663 00758672 02959661 00775244 00606000 00758692 00758674 00758676 00758677 00775922 00769938 00759487 00762121 00770421 00755615 00770737 00769321 00758657 00759488 00778907 00762114 1 8 8 1 1 1 VAR VAR VAR VAR 1 1 1 4 4 1 1 1 1 VAR VAR 1 2 1 1 1 2 2 2 1 1 1 1 SUPER AG-75S-1:1.21SU- 1 3/4"G/B HOUSING SUPER 75 LOCKWASHER M10 HHCS, M10X1.5X32 CAP,INPUT SHAFT,INPUT SEAL THRU SHAFT SHIM .012 SHIM,0.020 SHIM, ADJUSTMENT .004 OR .1M SHIM, ADJUSTMENT .010 OR .25M SPACER GEAR MOUNT SPACER OUTPUT SUPER 75 CAP, OUTPUT LOCKWASHER,M12 HEXB METRIC 12-P1.75-35MMPL8.8 HUB BLADE PIN-COTTER 3/16 X 2 NUT,1-14 FLANGED HEX SLOTTED SEAL, OUTPUT SHAFT 50X70X10 GASKET, .004 OR .1M GASKET, .010 OR .25M SHAFT OUTPUT SUPER 75 BEARING,TIMKEN 30210 GEAR, 14 TOOTH NUT,HEX THIN SLOTTED PIN, COTTER 3.6MM x 65MM BEARING LEVEL PLUG M18 X 1.5 WASHER,SEALING,17.8MX22MX3M SPACER,INPUT SHAFT GEAR, 17 TOOTH ASSY-DIPSTICK FOR SUPER 75 GBS PLUG,VENT W/WASHER 18M-P1.5 SE15-4A Master Parts Book (Aug-06) ©2006 Alamo Group Inc. Parts Section – 37 GEARBOX ASSEMBLY - RIGHT WING 1000 RPM S/N 14812 - 17107 AUG 2002 - MAR 2005 SE15-4A Master Parts Book (Aug-06) ©2006 Alamo Group Inc. Parts Section – 38 GEARBOX ASSEMBLY - RIGHT WING 1000 RPM S/N 14812 - 17107 AUG 2002 - MAR 2005 ITEM PART NO. QTY. DESCRIPTION 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 00776979 00775921 00755954 00758659 00758664 00758689 00758653 00758667 00758668 00758646 00758647 00759977 00775923 00758663 00758672 02959661 00775244 00606000 00758692 00758674 00758676 00758677 00775922 00769938 00759488 00770730 00770421 00755615 00770737 00769321 00758657 00759487 00762114 1 8 8 1 1 1 VAR VAR VAR VAR 1 1 1 4 4 1 1 1 1 VAR VAR 1 2 1 1 1 2 2 3 1 1 1 GEARBOX SUPER 75 1:1.21SU G/B HOUSING SUPER 75 LOCKWASHER M10 HHCS, M10X1.5X32 CAP,INPUT SHAFT,INPUT SEAL, INPUT SHAFT SHIM .012 SHIM,0.020 SHIM, ADJUSTMENT .004 OR .1M SHIM, ADJUSTMENT .010 OR .25M SPACER GEAR MOUNT SPACER OUTPUT SUPER 75 CAP, OUTPUT LOCKWASHER,M12 HEXB METRIC 12-P1.75-35MMPL8.8 HUB BLADE PIN-COTTER 3/16 X 2 NUT,1-14 FLANGED HEX SLOTTED SEAL, OUTPUT SHAFT 50X70X10 GASKET, .004 OR .1M GASKET, .010 OR .25M SHAFT OUTPUT SUPER 75 BEARING,TIMKEN 30210 GEAR, 17 TOOTH BEARING ADJUSTING NUT PIN, COTTER 3.6MM x 65MM BEARING LEVEL PLUG M18 X 1.5 WASHER,SEALING,17.8MX22MX3M SPACER,INPUT SHAFT GEAR, 14 TOOTH PLUG,VENT W/WASHER 18M-P1.5 SE15-4A Master Parts Book (Aug-06) ©2006 Alamo Group Inc. Parts Section – 39 GEARBOX ASSEMBLY - RIGHT WING 1000 RPM S/N 17108 - CURRENT APR 2005 - CURRENT SE15-4A Master Parts Book (Aug-06) ©2006 Alamo Group Inc. Parts Section – 40 GEARBOX ASSEMBLY - RIGHT WING 1000 RPM S/N 17108 - CURRENT APR 2005 - CURRENT ITEM PART NO. QTY. DESCRIPTION 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 00776979A 00775921 00755954 00758659 00758664 00758689 00758653 00758667 00758668 00758646 00758647 00759977 00775923 00758663 00758672 02959661 00775244 00606000 00758692 00758674 00758676 00758677 00775922 00769938 00759487 00762121 00770421 00755615 00770737 00769321 00758657 00759488 00778907 00762114 1 8 8 1 1 1 VAR VAR VAR VAR 1 1 1 4 4 1 1 1 1 VAR 1 2 1 1 1 2 2 2 1 1 1 1 1 SUPER AG-75R-1:1.21SU 1 3/4"G/B HOUSING SUPER 75 LOCKWASHER M10 HHCS, M10X1.5X32 CAP,INPUT SHAFT,INPUT SEAL, INPUT SHAFT SHIM .012 SHIM,0.020 SHIM, ADJUSTMENT .004 OR .1M SHIM, ADJUSTMENT .010 OR .25M SPACER GEAR MOUNT SPACER OUTPUT SUPER 75 CAP, OUTPUT LOCKWASHER,M12 HEXB METRIC 12-P1.75-35MMPL8.8 HUB BLADE PIN-COTTER 3/16 X 2 NUT,1-14 FLANGED HEX SLOTTED SEAL, OUTPUT SHAFT 50X70X10 GASKET, .004 OR .1M GASKET, .010 OR .25M SHAFT OUTPUT SUPER 75 BEARING,TIMKEN 30210 GEAR, 14 TOOTH NUT,HEX THIN SLOTTED PIN, COTTER 3.6MM x 65MM BEARING LEVEL PLUG M18 X 1.5 WASHER,SEALING,17.8MX22MX3M SPACER,INPUT SHAFT GEAR, 17 TOOTH ASSY-DIPSTICK FOR SUPER 75 GBS PLUG,VENT W/WASHER 18M-P1.5 SE15-4A Master Parts Book (Aug-06) ©2006 Alamo Group Inc. Parts Section – 41 GEARBOX ASSEMBLY - RIGHT WING 540 RPM S/N 14812 - 17107 AUG 2002 - MAR 2005 SE15-4A Master Parts Book (Aug-06) ©2006 Alamo Group Inc. Parts Section – 42 GEARBOX ASSEMBLY - RIGHT WING 540 RPM S/N 14812 - 17107 AUG 2002 - MAR 2005 ITEM PART NO. QTY. DESCRIPTION 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 00760506 00758661 00755954 00758659 00758664 00758689 00758653 00758667 00758668 00758646 00758647 00759977 00760889 00758663 00758672 02959661 00758675 00606000 00758692 00758674 00758676 00758677 00760892 00769938 00759488 00762121 00606000 00755615 00762114 ------------00769321 00758657 00759487 00770737 1 8 8 1 1 1 VAR VAR VAR VAR 1 1 1 4 4 1 1 1 1 VAR VAR 1 2 1 1 1 2 1 1 2 1 1 1 GEARBOX SPD RD CW/CCW HOUSING,GEARBOX SINGLE INPUT LOCKWASHER M10 HHCS, M10X1.5X32 CAP,INPUT SHAFT,INPUT SEAL, INPUT SHAFT SHIM .012 SHIM,0.020 SHIM, ADJUSTMENT .004 OR .1M SHIM, ADJUSTMENT .010 OR .25M SPACER GEAR MOUNT SPACER,OUTPUT BEARING CAP, OUTPUT LOCKWASHER,M12 HEXB METRIC 12-P1.75-35MMPL8.8 HUB,2 1/2 BLADE PIN-COTTER 3/16 X 2 NUT,1-14 FLANGED HEX SLOTTED SEAL, OUTPUT SHAFT 50X70X10 GASKET, .004 OR .1M GASKET, .010 OR .25M SHAFT OUTPUT W/SLOTTED NUT BEARING,TIMKEN 30210 GEAR, 17 TOOTH NUT,HEX THIN SLOTTED PIN-COTTER 3/16 X 2 BEARING PLUG,VENT W/WASHER 18M-P1.5 PLASTIC CAP PLUG WASHER,SEALING,17.8MX22MX3M SPACER,INPUT SHAFT GEAR, 14 TOOTH LEVEL PLUG M18 X 1.5 SE15-4A Master Parts Book (Aug-06) ©2006 Alamo Group Inc. Parts Section – 43 GEARBOX ASSEMBLY - RIGHT WING 540 RPM S/N 17108 - CURRENT APR 2005 - CURRENT SE15-4A Master Parts Book (Aug-06) ©2006 Alamo Group Inc. Parts Section – 44 GEARBOX ASSEMBLY - RIGHT WING 540 RPM S/N 17108 - CURRENT APR 2005 - CURRENT ITEM PART NO. QTY. DESCRIPTION 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 00776972A 00775921 00755954 00758659 00758664 00758689 00758653 00758667 00758668 00758646 00758647 00759977 00775923 00758663 00758672 02959661 00775244 00606000 00758692 00758674 00758676 00758677 00775922 00769938 00758693 00762121 00770421 00755615 00770737 00769321 00758657 00758694 00778907 00762114 1 8 8 1 1 1 VAR VAR VAR VAR 1 1 1 4 4 1 1 1 1 VAR VAR 1 2 1 1 1 2 2 2 1 1 1 1 SUPER AG-75R-1:1.46SU 1 3/4"G/B HOUSING SUPER 75 LOCKWASHER M10 HHCS, M10X1.5X32 CAP,INPUT SHAFT,INPUT SEAL, INPUT SHAFT SHIM .012 SHIM,0.020 SHIM, ADJUSTMENT .004 OR .1M SHIM, ADJUSTMENT .010 OR .25M SPACER GEAR MOUNT SPACER OUTPUT SUPER 75 CAP, OUTPUT LOCKWASHER,M12 HEXB METRIC 12-P1.75-35MMPL8.8 HUB BLADE PIN-COTTER 3/16 X 2 NUT,1-14 FLANGED HEX SLOTTED SEAL, OUTPUT SHAFT 50X70X10 GASKET, .004 OR .1M GASKET, .010 OR .25M SHAFT OUTPUT SUPER 75 BEARING,TIMKEN 30210 GEAR,13 TOOTH NUT,HEX THIN SLOTTED PIN, COTTER 3.6MM x 65MM BEARING LEVEL PLUG M18 X 1.5 WASHER,SEALING,17.8MX22MX3M SPACER,INPUT SHAFT GEAR,19 TOOTH ASSY-DIPSTICK FOR SUPER 75 GBS PLUG,VENT W/WASHER 18M-P1.5 SE15-4A Master Parts Book (Aug-06) ©2006 Alamo Group Inc. Parts Section – 45 GEARBOX SHIELD ATTACHMENT - DIVIDER S/N 14812 - CURRENT AUG 2002 - CURRENT ITEM PART NO. QTY. DESCRIPTION 1 2 3 4 5 6 7 0656130100 613512C8 00023500 7AH5101118 00756077 00695100 00780201 1 2 2 4 4 4 4 SHIELD, PRIMARY GEARBOX M8X1.25X40 GR.8.8-FT HEX CAPSC FLATWASHER,5/16,TYPE AW,ZP HHCS 5/8NC 2-1/4 NONPLATED 5 WASHER,5/8 HARDENED NUT,TOPLOCK 5/8 NC PLB WASHER, SPACER SE15-4A Master Parts Book (Aug-06) ©2006 Alamo Group Inc. Parts Section – 46 GEARBOX SHIELD ATTACHMENT - WING & CENTER 14812 - CURRENT AUG 2002 - CURRENT ITEM PART NO. QTY. DESCRIPTION 1 2 3 4 5 6 7 8 9 00775571 00775573 00002700 5F8130 00011100 00012101 00002000 7AH5101118 00695100 3 3 3 3 9 9 9 12 12 WLDMT SHIELD WLDMT BRKT SHIELD FLATWASHER 1/2 PL STD 1/2 NC WING NUT FLATWASHER 3/8 PL STD LOCKWASHER 3/8 PL HVY HEX CAP 3/8-16 X 3/4 GR.5 ZP HHCS 5/8NC 2-1/4 NONPLATED 5 NUT,TOPLOCK 5/8 NC PLB SE15-4A Master Parts Book (Aug-06) ©2006 Alamo Group Inc. Parts Section – 47 HITCH - PINTLE HOOK S/N 14812 - CURRENT AUG 2002 - CURRENT ITEM PART NO. QTY. DESCRIPTION 1 2 3 4 5 6 7 8 9 10 11 12 00773872 00752283 00752279 02891800 00001800 02712500 02030300 02845600 00695100 00773870 00003300 00037200 1 1 1 1 4 4 1 1 1 3 2 1 WLDMT PINTLE HOOK CLEVIS WLDMT, PINTLE HOOK MOUNTING PINTLE HOOK HHCS 1/2 NC 1-3/4 PL8 LOCKNUT TLM 1/2 NC PLB HHCS 1 NC 4 PL8 SPECIAL NUT TOPLOCK 1 NC PLB HEXB 5/8 NC 3 PL5 NUT,TOPLOCK 5/8 NC PLB DWG INSTL PINTLE HOOK OPTION HEXB 3/4 NC 4 PL5 NUT TOPLOCK 3/4 NC PLC NOTE: Drawbar length must be modified to obtain dim. "A".use driveline length check procedure in manual, to insure problem does not occur. SE15-4A Master Parts Book (Aug-06) ©2006 Alamo Group Inc. Parts Section – 48 HYDRAULIC CONTROL VALVE S/N 14812 - CURRENT AUG 2002 - CURRENT ITEM PART NO. 1 2 3 4 5 6 7 8 9 003880200 00759833 00751139 00751140 00751142 00751141 00751002 00751358 00751556 10 00752057 CLOSED CENTER QTY 1 3 3 OPEN CENTER QTY DESCRIPTION 1 OPEN CENTER VALVE CLOSED CENTER VALVE DETENT REPAIR KIT HIGH PRESSURE RELIEF VALVE KIT HANDLE ASSEMBLY PLUG (OPEN CENTER) CLOSED CENTER PLUG REPAIR KIT-SPRING RETURN TO CENTER SPOOL SEAL KIT FOR ITEM #1 OR #2 (NOT SHOWN) NON-RELIEF VALVE PLUG (CLOSED CENTER) 2 1 3 1 1 1 1 1 1 SE15-4A Master Parts Book (Aug-06) ©2006 Alamo Group Inc. Parts Section – 49 HYDRAULIC CONTROL VALVE W/MOUNTING KIT S/N 14812 - CURRENT AUG 2002 - CURRENT ITEM PART NO. QTY. DESCRIPTION 1 2 3 4 5 6 7 000999 02048800 1347 00275400 02960460 94514 00380200 00759833 00759682 8166M 10204000 7336 00010600 00011400 03101646 00013901 2 2 2 3 3 5 1 1 1 1 2 2 1 4 7 7 ADP.PIPE,8MP-8FPX-45 DEG REDUCER 12MP-8FP HOSE #8 - 8MP - 8MP - 60LG Q.D, COUPLER #8 ST.ADAPTER 8MP-8MP ADAPTER, HYD, ELBOW SWIVEL VALVE 3 SPL OPEN CTR VALVE,3SPOOL CLOSED CENTER ASSY, VALVE CONTROL SHIELD-BLK BRACKET,VALVE MOUNTING FENDER HHCS 3/8 NC 4 PL5 SPACER, SHIELD 3-SPOOL VALVE HEXB 3/8 NC 2 PL5 HHCS 3/8 NC 1 PL5 LOCKWASHER,3/8,MEDIUM-ZP NUT HEX 3/8 NC PL 8 9 10 11 12 13 14 15 SE15-4A Master Parts Book (Aug-06) ©2006 Alamo Group Inc. Parts Section – 50 HYDRAULIC SCHEMATIC SN 14812 - CURRENT AUG 2002 - CURRENT ITEM PART NO. QTY. DESCRIPTION 1 2 3 4 5 6 00774832 00773043 00774574 94507 ----------------------- 1 2 2 3 1 2 HOSE #6 - 8MP - 8MB -204LG HOSE #4 - 6MP - 6MP -240LG ADPT, HYD, ELBOW SWVL w/ORFICE ADAPTER, HYD, REDUCER CENTER CYLINDER WING CYLINDER SE15-4A Master Parts Book (Aug-06) ©2006 Alamo Group Inc. Parts Section – 51 LEVEL ROD ASSEMBLY S/N 14812 - CURRENT AUG 2002 - CURRENT ITEM PART NO. QTY. DESCRIPTION 1 2 3 4 5 6 7 00773005A 00755153 00770485A 00772046 00773118 15B1200 5C1490 651102 2 2 1 1 1 4 1 2 CONTROL ROD, ASY, LEVEL PIN-COTTER 3/16 X 1-1/2 PLATED NUT,EXTENDED ADJUSTMENT WELDMENT LEVEL ROD ,LONG WLDMT LEVEL ROD SHORT WASHER 3/4 P SAE HEXNUT 7/8 JAM ZP PIN-DRILLED SE15-4A Master Parts Book (Aug-06) ©2006 Alamo Group Inc. Parts Section – 52 SKID SHOE ATTACHMENT S/N 14812 - CURRENT AUG 2002 - CURRENT ITEM PART NO. QTY. DESCRIPTION 1 2 3 4 00774704 2A361612 4528 00763996 00764020 02030700 02716500 2 6 6 1 1 4 4 RUNNER, SKID SHOE PLW-BLT 3/8 X 1 1/2 NUT, LOCK 3/8-16 FLG WHIZ WLDMT-SKID-RH WLDMT-SKID-LH HHCS 1/2-13UNC 1-1/4 PL5 NUT TOPLOCK 1/2 NF PLB 5 6 SE15-4A Master Parts Book (Aug-06) ©2006 Alamo Group Inc. Parts Section – 53 SLIPCLUTCH ASSEMBLY - INTERMEDIATE S/N 14812 - CURRENT AUG 2002 - CURRENT ITEM PART NO. QTY. DESCRIPTION 1 2 3 4 5 6 7 8 9 10 11 12 00775331 00775333 8366 00775334 00775335 00775336 00775337 00775338 00775339 00754566 00755881 00756164 61076C8 1 4 1 1 1 1 6 6 6 6 2 2 CLUTCH FRICTION FLANGE YOKE RING,CLUTCH LINING HUB 1-3/4-20 SPLINE DRIVE PLATE DRIVE PLATE THRUST PLATE BOLT HEX M12 X P1.25 X 115M COMPRESSION SPRING LOCKWASHER, 12MM NUT METRIC TLM 12MM-P1.25 PL5 NUT METRIC 12MM-P1.75 GR.8.8 M12X1.75X65 GR.8.8 HEX CAPSCRE SE15-4A Master Parts Book (Aug-06) ©2006 Alamo Group Inc. Parts Section – 54 SLIPCLUTCH ASSEMBLY - WING CAT 4 S/N 14812 - CURRENT AUG 2002 - CURRENT ITEM PART NO. QTY. DESCRIPTION 1 2 3 4 5 6 7 8 9 00775315 00775321 8366 00775322 00775323 00775324 00775325 00775326 00775327 00775328 1 1 1 1 2 1 8 2 8 CLUTCH FRICTION YOKE, FLANGE RING,CLUTCH LINING HUB 1 3/4-20 I.C. PLATE, THRUST SPRING, BELLEVILLE HEX BOLT M10 X 50 HEX LOCKNUT M10 NUT P1.75 M12 BOLT HEX M12 X 65 SE15-4A Master Parts Book (Aug-06) ©2006 Alamo Group Inc. Parts Section – 55 SLIPCLUTCH ASSEMBLY - WING CAT 5 S/N 14812 - CURRENT AUG 2002 - CURRENT ITEM PART NO. QTY. DESCRIPTION 1 2 3 4 5 6 7 8 9 10 11 12 00775382 00775383 8366 00775334 00775335 00775336 00775337 00775338 00775339 00754566 00755881 00756164 61076C8 1 4 1 1 1 1 6 6 6 6 2 2 FRICTION CLUTCH YOKE FLANGE RING,CLUTCH LINING HUB 1-3/4-20 SPLINE DRIVE PLATE DRIVE PLATE THRUST PLATE BOLT HEX M12 X P1.25 X 115M COMPRESSION SPRING LOCKWASHER, 12MM NUT METRIC TLM 12MM-P1.25 PL5 NUT METRIC 12MM-P1.75 GR.8.8 M12X1.75X65 GR.8.8 HEX CAPSCRE SE15-4A Master Parts Book (Aug-06) ©2006 Alamo Group Inc. Parts Section – 56 SMV SIGN MOUNTING S/N 14812 - CURRENT AUG 2002 - CURRENT ITEM PART NO. QTY. DESCRIPTION 1 2 3 4 03200347 00778530 00021400 02959924 1 1 2 2 EMBLEM, SMV SMV BRACKET MOUNT PLATE HEXB 1/4 NC 3/4 PL5 NUT TOPLOCK 1/4 NC PLB SE15-4A Master Parts Book (Aug-06) ©2006 Alamo Group Inc. Parts Section – 57 TIRE OPTION S/N 14812 - CURRENT AUG 2002 - CURRENT ITEM PART NO. QTY. DESCRIPTION 1 2 3 4 00008700 00025200 00771461 00749698 1 1 1 1 WHEEL, 15 X 5.00 DC (RIM ONLY) LAMINATED PUNCTURE-PROOF TIRE & WHEEL ASSEMBLY (21" OD) 6.00 X 9 TIRE,AIRPLANE USED ASSY, WHL/IMPLEMENT TIRE SE15-4A Master Parts Book (Aug-06) ©2006 Alamo Group Inc. Parts Section – 58 TIRE OPTION - FOAM FILLED USED AIRCRAFT S/N 14812 - CURRENT AUG 2002 - CURRENT ITEM PART NO. QTY. DESCRIPTION 1 2 00766911 00766911A - ASY,AIRCRAFT TIRE & WHEEL (CURRENT PRODUCTION) ASY, AIRCRAFT TIRE & WHEEL (OBSOLETE, NOT CURRENT PRODUCTION) SE15-4A Master Parts Book (Aug-06) ©2006 Alamo Group Inc. Parts Section – 59 TONGUE ASSEMBLY S/N 14812 - CURRENT AUG 2002 - CURRENT ITEM PART NO. QTY. DESCRIPTION 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 00776492 00764540A 00755305 02030300 02712500 00759275 00760895 02030700 00001800 00772391 00764515 1431565 40010000 00764537 00764536 00037200 03200269 00755153 00037200 15B1200 651102 1 1 1 2 1 3 2 2 2 1 1 1 1 1 1 1 1 1 1 4 1 TONGUE WELDMENT WELDMENT CLEVIS BOLT 1-8UNC-6 LG GRD 8 NUT TOPLOCK 1 NC PLB HHCS 1 NC 4 PL8 SPECIAL WASHER-HITCH CLEVIS WLDMT-TONGUE PIVOT PIN HHCS 1/2-13UNC 1-1/4 PL5 LOCKNUT TLM 1/2 NC PLB JACK PARKING 3000LB SIDEWIND CHAIN-SAFETY TOW-6000 LB. CAP. IID SHAFT TRANSPORT SUPPORT PIN COTTER 1/8 X1 WLDMT CONTROL ROD THREADED WLDMT-CONTROL ROD, LONG NUT TOPLOCK 3/4 NC PLC HHCS 3/4 NC 3 PL8 PIN-COTTER 3/16 X 1-1/2 PLATED NUT TOPLOCK 3/4 NC PLC WASHER 3/4 P SAE PIN-DRILLED SE15-4A Master Parts Book (Aug-06) ©2006 Alamo Group Inc. Parts Section – 60 WEIGHT BOX ATTACHMENT S/N 14812 - CURRENT AUG 2002 - CURRENT ITEM PART NO. QTY. DESCRIPTION 1 2 3 4 5 6 7 8 9 00760055 00760056 00774704 2A381312 4528 00760072 02030700 00002700 00001800 00760995 1 1 3 6 1 2 2 2 2 ASSY-WEIGHT BOX WLDMT-WEIGHT BOX RUNNER, SKID SHOE BOLT,PLOW 1/2 NC X 1-1/2 GR.5 NUT, LOCK 3/8-16 FLG WHIZ ASSY-CHAIN GD WT BOX HHCS 1/2-13UNC 1-1/4 PL5 FLATWASHER 1/2 PL STD LOCKNUT TLM 1/2 NC PLB PLATE, COVER- WEIGHT BOX SE15-4A Master Parts Book (Aug-06) ©2006 Alamo Group Inc. Parts Section – 61 WHEEL HUB ASSEMBLY S/N 14812 - 16663 AUG 2002 - DEC 2004 ITEM PART NO. QTY. DESCRIPTION 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 00757241 00756489 00756528 00756576 00750434 00756577 00752177 00750614 00756490 02957044 00756493 00756492 00026200 00003500 00756489 0371242102 1 1 1 1 1 5 5 1 1 1 1 1 1 1 1 WHEEL HUB, PREASSY HUB W/ CUPS & STUBS WHEEL HUB ACCESS. KIT BEARING CUP OUTSIDE BEARING CONE INSIDE BEARING CUP INSIDE BOLT, STUD 1/2-20 NF X 1-7/8 NUT 1/2-20NF 90DEG.CONE LUG PL NUT SLOTTED THIN 1 NF PLC OIL SEAL HEAVY DUTY - TK-15 WASHER DUST CAP PIN-COTTER 5/32 X 1-1/2 ZERK FITTING 1/8 STRAIGHT HUB W/ CUPS & STUBS BEARING CONE Note: P/N 00756489 contains items 3, 5, 6, 13, & 14. P/N 00756528 contains items 4, 7, 8, 9, 10, 11, 12, & 15. SE15-4A Master Parts Book (Aug-06) ©2006 Alamo Group Inc. Parts Section – 62 WHEEL HUB ASSEMBLY S/N 16664 - CURRENT JAN 2005 - CURRENT ITEM PART NO. QTY. DESCRIPTION 1 2 3 4 5 6 7 8 9 10 11 12 13 14 00774821 00756489 00756492 00752177 00778108 00756014 00756490 00756493 00026200 00750434 00756576 0371242102 00756577 00003500 1 1 1 5 1 5 1 1 1 1 1 1 1 1 SPINDLE SINGLE WHEEL HUB W/ CUPS & STUBS DUST CAP BOLT, STUD 1/2-20 NF X 1-7/8 SEAL PROTECTOR ROTOR NUT SLOTTED THIN 1 NF PLC WASHER PIN-COTTER 5/32 X 1-1/2 BEARING CONE INSIDE BEARING CUP OUTSIDE BEARING CONE BEARING CUP INSIDE ZERK FITTING 1/8 STRAIGHT SE15-4A Master Parts Book (Aug-06) ©2006 Alamo Group Inc. Parts Section – 63 WINCH AND STAND ASSEMBLY S/N 14812 - CURRENT AUG 2002 - CURRENT ITEM PART NO. QTY. DESCRIPTION 1 2 3 4 5 6 7 8 9 10 11 12 13 14 7061 7062 7063 00011400 00011100 7091 03101646 00013901 8422 8421 00010300 00010400 02675800 00001400 1 1 1 3 3 1 3 3 1 1 2 2 2 2 HOOK CLIP-1/4 WIRE ROPE CABLE HHCS 3/8 NC 1 PL5 FLATWASHER 3/8 PL STD BRAKE WINCH LOCKWASHER,3/8,MEDIUM-ZP NUT HEX 3/8 NC PL WINCH TUBE ASSEMBLY WINCH STAND BRACKET LOCKWASHER 5/8 PL STD NUT 5/8 NC HEX PL HHCS 5/8-11UNC 1-1/2 PL5 FLATWASHER 5/8 PL STD SE15-4A Master Parts Book (Aug-06) ©2006 Alamo Group Inc. Parts Section – 64 WING ATTACHMENT S/N 14812 - CURRENT AUG 2002 - CURRENT ITEM PART NO. QTY. DESCRIPTION 1 2 3 4 5 6 7 8 9 00777185 00777186 00021900 00750940 0656261000 00774173 5710121 5F5180 00023500 2 4 4 4 2 2 3 6 6 HINGE ROD HINGE ROD CAP HEXB 5/16 NC 1-3/4 PL5 NUT TOPLOCK 5/16 NC PLB SPACER,SHORT HINGE SPACER LONG HINGE COVER PLATE NUT 5/16 NC WING FLATWASHER,5/16,TYPE AW,ZP SE15-4A Master Parts Book (Aug-06) ©2006 Alamo Group Inc. Parts Section – 65 SERVIS-RHINO LIMITED WARRANTY 1. LIMITED WARRANTIES 1.01.Servis-Rhino warrants for one year from the purchase date to the original non-commercial, governmental, or municipal purchaser (“Purchaser”) and warrants for six months to the original commercial or industrial purchaser (“Purchaser”) that the goods purchased are free from defects in material or workmanship. 1.02.Manufacturer will replace for the Purchaser any part or parts found, upon examination at one of its factories, to be defective under normal use and service due to defects in material or workmanship. 1.03.This limited warranty does not apply to any part of the goods which has been subjected to improper or abnormal use, negligence, alteration, modification, or accident, damaged due to lack of maintenance or use of wrong fuel, oil, or lubricants, or which has served its normal life. This limited warranty does not apply to any part of any internal combustion engine, or expendable items such as blades, shields, guards, or pneumatic tires except as specifically found in your Operator’s Manual. 1.04.Except as provided herein, no employee, agent, Dealer, or other person is authorized to give any warranties of any nature on behalf of Manufacturer. 2. REMEDIES AND PROCEDURES. 2.01.This limited warranty is not effective unless the Purchaser returns the Registration and Warranty Form to Manufacturer within 30 days of purchase. 2.02.Purchaser claims must be made in writing to the Authorized Dealer (“Dealer”) from whom Purchaser purchased the goods or an approved Authorized Dealer (“Dealer”) within 30 days after Purchaser learns of the facts on which the claim is based. 2.03.Purchaser is responsible for returning the goods in question to the Dealer. 2.04.If after examining the goods and/or parts in question, Manufacturer finds them to be defective under normal use and service due to defects in material or workmanship, Manufacturer will: (a) Repair or replace the defective goods or part(s) or (b) Reimburse Purchaser for the cost of the part(s) and reasonable labor charges (as determined by Manufacturer) if Purchaser paid for the repair and/or replacement prior to the final determination of applicability of the warranty by Manufacturer. The choice of remedy shall belong to Manufacturer. 2.05.Purchaser is responsible for any labor charges exceeding a reasonable amount as determined by Manufacturer and for returning the goods to the Dealer, whether or not the claim is approved. Purchaser is responsible for the transportation cost for the goods or part(s) from the Dealer to the designated factory. 3. LIMITATION OF LIABILITY. 3.01.MANUFACTURER DISCLAIMS ANY EXPRESS (EXCEPT AS SET FORTH HEREIN) AND IMPLIED WARRANTIES WITH RESPECT TO THE GOODS INCLUDING, BUT NOT LIMITED TO, MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE. 3.02.MANUFACTURER MAKES NO WARRANTY AS TO THE DESIGN, CAPABILITY, CAPACITY, OR SUITABILITY FOR USE OF THE GOODS. 3.03.EXCEPT AS PROVIDED HEREIN, MANUFACTURER SHALL HAVE NO LIABILITY OR RESPONSIBILITY TO PURCHASER OR ANY OTHER PERSON OR ENTITY WITH RESPECT TO ANY LIABILITY, LOSS, OR DAMAGE CAUSED OR ALLEGED TO BE CAUSED DIRECTLY OR INDIRECTLY BY THE GOODS INCLUDING, BUT NOT LIMITED TO, ANY INDIRECT, SPECIAL, CONSEQUENTIAL, OR INCIDENTAL DAMAGES RESULTING FROM THE USE OR OPERATION OF THE GOODS OR ANY BREACH OF THIS WARRANTY. NOT WITHSTANDING THE ABOVE LIMITATIONS AND WARRANTIES, MANUFACTURER’S LIABILITY HEREUNDER FOR DAMAGES INCURRED BY PURCHASER OR OTHERS SHALL NOT EXCEED THE PRICE OF THE GOODS. 3.04.NO ACTION ARISING OUT OF ANY CLAIMED BREACH OF THIS WARRANTY OR TRANSACTIONS UNDER THIS WARRANTY MAY BE BROUGHT MORE THAN TWO (2) YEARS AFTER THE CAUSE OF ACTION HAS OCCURRED. 4. MISCELLANEOUS. 4.01.Proper Venue for any lawsuits arising from or related to this limited warranty shall be only in Guadalupe County, Texas. 4.02.Manufacturer may waive compliance with any of the terms of this limited warranty, but no waiver of any terms shall be deemed to be a waiver of any other term. 4.03.If any provision of this limited warranty shall violate any applicable law and is held to be unenforceable, then the invalidity of such provision shall not invalidate any other provisions herein. 4.04.Applicable law may provide rights and benefits to purchaser in addition to those provided herein. KEEP FOR YOUR RECORDS ATTENTION: Purchaser should fill in the blanks below for his reference when buying repair parts and/or for proper machine identification when applying for warranty. Servis-Rhino Implement Model _______________________________ Serial Number ________________________________ Date Purchased __________________________________________ Dealer ______________________________________ ATTENTION: READ YOUR OPERATOR'S MANUAL RHINO® 1020 S. Sangamon Ave. Gibson City, IL 60936 800-446-5158 Email: parts@servis-rhino.com TO THE OWNER/OPERATOR/DEALER To keep your implement running efficiently and safely, read your manual thoroughly and follow these directions and the Safety Messages in this Manual. The Table of Contents clearly identifies each section where you can easily find the information you need. The OCCUPATIONAL SAFETY AND HEALTH ACT (1928.51 Subpart C) makes these minimum safety requirements of tractor operators: REQUIRED OF THE OWNER: 1. 2. 3. 4. Provide a Roll-Over-Protective Structure that meets the requirements of this Standard; and Provide Seatbelts that meet the requirements of this paragraph of this Standard and SAE J4C; and Ensure that each employee uses such Seatbelt while the tractor is moving; and Ensure that each employee tightens the Seatbelt sufficiently to confine the employee to the protected area provided by the ROPS. REQUIRED OF THE OPERATOR 1. 2. 3. 4. 5. 6. 7. 8. 9. Securely fasten seatbelt if the tractor has a ROPS. Where possible, avoid operating the tractor near ditches, embankments, and holes. Reduce speed when turning, crossing slopes, and on rough, slick, or muddy surfaces. Stay off slopes too steep for safe operation. Watch where you are going - especially at row ends, on roads, and around trees. Do not permit others to ride. Operate the tractor smoothly - no jerky turns, starts, or stops. Hitch only to the drawbar and hitch points recommended by the tractor manufacturer. When the tractor is stopped, set brakes securely and use park lock, if available. Keep children away from danger all day, every day... Equip tractors with rollover protection (ROPS) and keep all machinery guards in place... Please work, drive, play and live each day with care and concern for your safety and that of your family and fellow citizens. SE10-4A/SE15-4A Printed U.S.A. PL 08-06 P/N 00777391MB
Source Exif Data:
File Type : PDF File Type Extension : pdf MIME Type : application/pdf PDF Version : 1.3 Linearized : Yes Page Count : 72 Page Mode : UseOutlines Page Layout : SinglePage Has XFA : No XMP Toolkit : XMP toolkit 2.9.1-14, framework 1.6 About : uuid:56ca3d21-0d7a-4306-a6e0-9a14c5141946 Producer : Acrobat Distiller 6.0.1 (Windows) Creator Tool : PageMaker 6.5 Modify Date : 2006:08:29 13:57:58-05:00 Create Date : 2006:08:29 09:22:14-05:00 Metadata Date : 2006:08:29 13:57:58-05:00 Document ID : uuid:968a9a4a-ddfe-48ac-a4dc-faf44daf7acb Format : application/pdf Title : SE15-4A SE10-4A.p65 Creator : sftrinidad Author : sftrinidadEXIF Metadata provided by EXIF.tools