User manual
| Download: |  |
| Mirror Download [FCC.gov] | |
| Document ID | 3121175 |
| Application ID | Fv+/Z1yuVoaOIq6bZAhmdg== |
| Document Description | User manual |
| Short Term Confidential | No |
| Permanent Confidential | No |
| Supercede | No |
| Document Type | User Manual |
| Display Format | Adobe Acrobat PDF - pdf |
| Filesize | 5.48kB (68460 bits) |
| Date Submitted | 2016-09-02 00:00:00 |
| Date Available | 2017-03-01 00:00:00 |
| Creation Date | 2016-08-26 15:24:31 |
| Producing Software | Acrobat Distiller 8.1.0 (Windows) |
| Document Lastmod | 2016-08-26 15:24:31 |
| Document Title | Microsoft Word - Sharp_RUITZ0004MPZZ_UserManual_V0_3_20160826 |
| Document Creator | PScript5.dll Version 5.2.2 |
| Document Author: | jt0090617 |
26-Aug.-2016 Ver.0.3 RUITZ0004MPZZ Bluetooth ® low energy Module Bluetooth® 4.2 low energy RUITZ0004MPZZ Data Report Please note that this manual should not be provided to end-users. SHARP CORPORATION 1/7 26-Aug.-2016 Ver.0.3 RUITZ0004MPZZ Control No. HD-AG-A150049 (1/5) Control name General Items Scope This specification (“Specification”) applies to the hybrid IC “RUITZ0004MPZZ”, a Bluetooth® 4.2 low energy module (“Product”). 1. Type: RUITZ0004MPZZ 2. Function: Radio frequency module. Bluetooth® standard Ver 4.2 low energy conformity 3. Application: Health & Fitness Equipment, Sensor, Toys 4. Note: a. Regulatory information: Compliance with each radio law and/or regulation in below listed countries has been confirmed under the conditions follows: - Company name of Manufacturer: SHARP CORPORATION - Equipment name/ Model name: Wireless Module / RUITZ0004MPZZ - Manufacturing date: traceable from “lot number” shown on device - Country of origin: JAPAN - Countries: Canada, Japan, U.S.A. To maintain the compliance, please install RUITZ0004MPZZ into your final product within the scope of the specification and regulation of each country. Japan Regulatory Information This module is approved with the specific antenna on this module. a) Please ensure that your product can bear a label with the following information. If the product is so small that it is not practicable to place the label, please place it in the instruction manual and package. The mark diameter shall be equal or greater than 3mm. This product installs a radio system which has been approved as a radio station in a low power data communication system based on the Radio Law. RUITZ0004MPZZ : 001-A05676 SHARP CORPORATION 2/7 26-Aug.-2016 Ver.0.3 RUITZ0004MPZZ Control No. HD-AG-A150049 (2/5) Control name General Items Canada Regulatory Information a) This device complies with Industry Canada license-exempt RSS standards. Operation is subject to the following two conditions: (1) this device may not cause interference, and (2) this device must accept any interference, including interference that may cause undesired operation of the device. L'utilisation de ce dispositif est autorisée seulement aux conditions suivantes: (1) il ne doit pas produire de brouillage et (2) l'utilisateur du dispositif doit être prêt à accepter tout brouillage radioélectrique reçu, même si ce brouillage est susceptible de compromettre le fonctionnement du dispositif. b) This product is certified as type of the portable device with Industry Canada Rules. To maintain compliance with RF Exposure requirement,please use within specification of this product. - IC: 548B-RUITZ0004MP Ce produit est certifié comme type de l'appareil portable avec Industrie Règles de Canada. Pour maintenir l'acquiescement avec exigence Exposition de RF, veuillez utiliser dans spécification de ce produit. - IC: 548B-RUITZ0004MP c) Please notify certified ID by either one of the following method on your product. Specifiez ID certifiée dans votre produit par une de méthode suivante. -Contains Transmitter module IC : 548B-RUITZ0004MP -Contains IC : 548B-RUITZ0004MP Pecifiez ID certifiée dans votre produit par une de méthode suivante. -Contains Transmitter module IC : 548B-RUITZ0004MP -Contains IC : 548B-RUITZ0004MP FCC Regulatory Information a) This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. b) Please notify certified ID by either one of the following method on your product. -Contains Transmitter Module FCC ID: APYBSC0001 -Contains FCC ID: APYBSC0001 c) CAUTION: changes or modifications not expressly approved by the party responsible for compliance could void the use’s authority to operate the equipment. d) This product is certified as type of the portable device with FCC Rules. To maintain compliance with RF Exposure requirement, please use within specification of this product. - FCC ID: APYBSC0001 e) The antenna used for this transmitter must not be co-located or operating in conjunction with any other antenna or transmitter. SHARP CORPORATION 3/7 26-Aug.-2016 Ver.0.3 RUITZ0004MPZZ Control No. HD-AM-A150049 (1/1) Control name Absolute maximum ratings Absolute maximum ratings Symbol Parameter VCC_NRF Min. Max. Units -0.3 +3.6 GND VIO -0.3 VCC_NRF+ 0.3 Storage temperature -40 +85 Deg-C kV 100 MSL Moisture Sensitivity Level ESD HBM Human Body Model ESD MM Machine Model Endurance Flash Memory Endurance 20000 Retention Flash Memory Retention 10 years write/erase cycles At 40 deg-C Number of times an address can be written times between erase cycles SHARP CORPORATION 4/7 26-Aug.-2016 Ver.0.3 RUITZ0004MPZZ Control No. HD-AE-A150049 (1/7) Control name Electrical characteristics Electrical characteristics Recommendation operating range Symbol Parameter Supply voltage, normal mode VCC_NRF Supply voltage, normal mode, VCC_NRF DC/DC converter output voltage 1.9 V tR_VCC_NRF Supply rise time (0V to 1.8V)*1 TA Operation temperature Min. 1.8 Typ. 3.0 Max. 3.6 Units 2.1 3.0 3.6 100 ms 75 Deg-C -25 25 *1 The on-chip power-on reset circuitry may not function properly for rise times outside the specified interval. Also after power off, please start up from below 0.3V. RF Specifications Symbol Description Min. Fop Operating frequencies 2402 Typ. PLLres PLL programming resolution Df Frequency deviation PRF Maximum output power PRFC RF power control range PRFCR RF power accuracy PWHISP RF power whisper mode -30 PBW 20 dB bandwidth for modulated carrier 950 PRF1 Max. Units 2480 MHz +/-225 +/-250 20 MHz +/-275 kHz dBm 24 dB +/-4 dB dBm 1100 kHz 1st Adjacent Channel Transmit Power 1 MHz -20 dBc PRF2 2nd Adjacent Channel Transmit Power 2 MHz -45 dBc PRXMAX Maximum received signal strength at < 0.1% PER dBm PSENS IT Receiver sensitivity (0.1% BER) Ideal transmitter -93 dBm PSENS DT Receiver sensitivity (0.1% BER) dirty transmitter -91 dBm SHARP CORPORATION 5/7 26-Aug.-2016 Ver.0.3 RUITZ0004MPZZ Control No. HD-BA-A150049 (1/2) Control name Pin Layout Pin Descriptions Pin Pin name Pin function Ground Description GND P0.27 AIN1 XL1 General purpose I/O pin Digital I/O ADC input 1 Analog input Crystal connection for 32.768kHz crystal oscillator or Analog input external 32.768kHz crystal reference P0.26 AIN0 XL2 Digital I/O General purpose I/O pin Analog input ADC input 0 Analog Crystal connection for 32.768kHz crystal oscillator output P0.21 Digital I/O General purpose I/O pin VCC_NRF Power Power supply AVDD Power Analog Power supply P0.23 Digital I/O General purpose I/O pin P0.17 Digital I/O General purpose I/O pin GND Ground Ground (0 V) 10 DEC2 Power Power supply for low voltage mode 11 P0.19 Digital I/O General purpose I/O pin 12 GND Ground Ground (0 V) 13 OUT_ANT Antenna In/Out Internal antenna. It should be connected to Pin 14 OUT_MOD for normal operation. 14 OUT_MOD RF In/Out RF I/O pin. It should be connected to Pin 13 OUT_ANT for normal operation. 15 GND Ground Ground (0 V) 16 SWDIO Digital I/O System reset (active low). Also HW debug and flash programming I/O 17 SWDCLK Digital input HW debug and flash programming I/O 18 P0.25 Digital I/O General purpose I/O pin 19 P0.03 AIN4 Digital I/O General purpose I/O pin Analog input ADC input 4 20 GND Ground 21 P0.01 AIN2 Digital I/O General purpose I/O pin Analog input ADC input 2 22 P0.02 AIN3 Digital I/O General purpose I/O pin Analog input ADC input 3 Ground (0 V) Ground (0 V) SHARP CORPORATION 6/7 26-Aug.-2016 Ver.0.3 RUITZ0004MPZZ Control No. HD-BA-A150049 (2/2) Control name Pin Layout Pin Pin name 23 P0.00 AREF0 Pin Description function Digital I/O General purpose I/O pin Analog input ADC Reference voltage 24 DCC Power 25 P0.05 AIN6 Digital I/O General purpose I/O pin Analog input ADC input 6 26 P0.06 AIN7 AREF1 Digital I/O General purpose I/O pin Analog input ADC input 7 Analog input ADC Reference voltage 27 P0.04 AIN5 Digital I/O General purpose I/O pin Analog input ADC input 5 28 GND Ground DC/DC output Ground (0 V) SHARP CORPORATION 7/7
Source Exif Data:
File Type : PDF File Type Extension : pdf MIME Type : application/pdf PDF Version : 1.4 Linearized : Yes XMP Toolkit : Adobe XMP Core 4.0-c316 44.253921, Sun Oct 01 2006 17:14:39 Format : application/pdf Title : Microsoft Word - Sharp_RUITZ0004MPZZ_UserManual_V0_3_20160826 Creator : jt0090617 Create Date : 2016:08:26 15:24:31+09:00 Creator Tool : PScript5.dll Version 5.2.2 Modify Date : 2016:08:26 15:24:31+09:00 Producer : Acrobat Distiller 8.1.0 (Windows) Document ID : uuid:49a77d03-edcc-46a3-9aea-b96c2282c89b Instance ID : uuid:6bbc9a72-280b-4e38-8059-4b40b27a8869 Page Count : 7 Author : jt0090617EXIF Metadata provided by EXIF.tools