Sharp HRO00082 Cellular Phone User Manual 2

Sharp Corporation Cellular Phone Users Manual 2

Contents

Users Manual 2

35e02_dv62_7e.fm[35/56]Before Using the Handset1In the Custom menu, select [Settings]/[General settings]/[TOUCH CRUISER set]/[Usage settings].2Select the setting/t.1In the Custom menu, select [Settings]/[General settings]/[TOUCH CRUISER set]/[Pointer speed]/[Scroll speed].2Select the speed/t.Set, change or save functions from the menu screens. For details on operations in the viewer position nP. 37Set the start menu that displayed when t is pressed in stand-by.1In stand-by, press t/[Settings]/[Disp/LED/Power saver]/[Menu priority].:In the Custom menu/Basic menu: Press C/[Menu priority].2Select the start menu/t/[Yes].Cautions when using the Optical TOUCH CRUISER Do not operate the Optical TOUCH CRUISER using a pointed metallic object such as a pen tip. May cause scratches or a failure of the sensor. Note that putting a sticker, etc. to the operating range may cause a malfunction. Because the Optical TOUCH CRUISER detects motions of the fingerprint, it may not operate properly depending on the condition of the finger (when foreign objects, such as dust, sand, etc. are attached to the finger).Setting whether to use Optical TOUCH CRUISER <Usage settings>Setting pointer speed/scroll speed <Pointer speed/Scroll speed>Setting and selecting menuThe explanations in this manual are based on how to retrieve a function from the Custom menu.Setting start menu <Menu priority>Start menu CharacteristicsCustom menuThe preset Kisekae Tool (nP. 113) can be selected and set. Each Kisekae Tool consists of different functions and designs. Kisekae Tools can be downloaded from sites and used.Preset Kisekae ToolsWhite Black Pink拡大メニュー(Large) シンプル(Simple)ダイレクトメニュー※Preset Kisekae Tools differ depending on the FOMA terminal handset color.Basic menu Select the icon displayed on the menu to retrieve the function. Also, input the function number, which is assigned to each function, to quickly retrieve the function to be used.dv62_E.book 35 ページ ２００８年１１月３日　月曜日　午後８時１８分
36e02_dv62_7e.fm[36/56]Before Using the Handset■Switching set start menu temporarilySwitch the start menu temporarily. When the stand-by display reappears, the start menu returns to the one set in Menu priority.Use the Shortcut menu to retrieve saved functions quickly. Other functions can also be saved in the Shortcut menu (nP. 393). For details on operating shortcut menu nP. 393 For details on the available functions nP. 454 Use w and the Optical TOUCH CRUISER in either menu. Press the dial key corresponding to the menu item number (U, V, W, etc.) to select a function. However, in the Custom menu, a function may not be selected by using the menu item numbers. The method for selecting functions may differ depending on the Kisekae Tool set for the Custom menu. Press c to re-select a function, and the previous screen reappears. Press H to return to stand-by.■Retrieving from the Custom menuStand-bytShortcut menuaBasic menuCustom menupRetrieving a function from each menuWhen a stock icon (nP. 32) appears in stand-by, select G to show the each menu.The way of activating 1Seg with Multi guide key or Optical TOUCH CRUISER is explained as an example below. For , (;), use the Optical TOUCH CRUISER to select an item. The following shows the screen operated with the Optical TOUCH CRUISER.,(;)tCustom menu When [1Seg] appearsWhen 1Seg is activated,(;)tor wtor wtdv62_E.book 36 ページ ２００８年１１月３日　月曜日　午後８時１８分
e02_dv62_7e.fm[37/56]37Continued on next pageBefore Using the Handset■Retrieving from the Basic menu In the Basic menu, input the function number, which is assigned to setting menu, to quickly retrieve the function to be used (nP. 454).When [Submenu] appears in the Operation guidance, press C to display functions (Submenu) that can be used in the screen. Select the displayed Submenu with w or the Optical TOUCH CRUISER. If there are multiple pages in the Submenu, change pages with w or the Optical TOUCH CRUISER.Alternatively, press the dial key corresponding to the menu item number (U, V, W, etc.) to select a function. However, some Submenus do not have item numbers.In the viewer position, operate by putting the finger on the touch panel (screen). In other than the viewer position, the touch panel is available during Videophone (nP. 78). The operations differ depending on the function and screen in use. In addition, the message stating that the operation is not available appears when the touch panel cannot be used. Operate the touch panel inside the following operating range of touch panel. However, when a substitute image appears in the right side of the screen, operate in the left side of the screen where functions are shown. The notation of operation described in this manual and its meaning are shown below.TouchPut the finger on the touch panel and put it off.Double-touchQuickly touch the same point twice. When the Custom menu image is changed by Kisekae Tool, the operation may differ from the description in this manual. In this case, switch the menu screen to the Basic menu (nP. 35) or perform the Reset menu screen (nP. 115).Selecting a function from Submenu,(;)tBasic menu When [1Seg] appearsWhen 1Seg is activated,(;)tor wtor utSubmenu screenTouch panelOperations in viewer positionTouch panelOperating range of the touch paneldv62_E.book 37 ページ ２００８年１１月３日　月曜日　午後８時１８分
38e02_dv62_7e.fm[38/56]Before Using the HandsetSlideKeep the finger on the touch panel and slide it.Quick slideQuickly slide the finger and put it off.Putting the distance between two fingers apart/closerPut two fingers on the touch panel and slide them with putting the distance between two fingers apart/closer. When putting the finger on the touch panel, the tone sounds and the vibrator is activated (excluding while activating Touch menu and a camera).•The volume can be changed (nP. 104). The tone cannot be changed.• The vibrator can be set to ON/OFF (nP. 105).Retrieve functions such as Full Browser or 1Seg from the Touch menu. Operating or changing settings with the Submemu or control key is available while using each function (touch operation is also available).■Touch menu If the screen is switched from the normal position to the viewer position in the stand-by display, Custom menu, Basic menu or others, Touch menu appears.•Functions to activate when setting the handset to the viewer position in the stand-by display can be changed (nP. 382). Touch the touch panel while displaying Stand-by (W) in the viewer position to display the Touch menu. The following functions can be retrieved from the Touch menu.*1 “Mapping appli” (nP. 312) is started. i-appli to start can be changed from the Map setting (nP. 277, P. 311).*2 The music is played from the spot where the playback stopped previously.When using the touch panel The touch panel does not work when operated with a gloved finger or with foreign objects placed on the operation pad. Note that operating with a wet finger or putting a sticker to the touch panel (display) may cause a malfunction.Using menus or functionsMap/GPS appli*1 Data box My pictureFull Browser Home i-motionBookmark 1Seg1Seg LifeKit Manga&Book ReaderCamera Shoot still picShoot movie Document ViewerMail Inbox MUSIC Player*2OutboxUnsent messagesCompose messagedv62_E.book 38 ページ ２００８年１１月３日　月曜日　午後８時１８分
39e02_dv62_7e.fm[39/56]Before Using the Handset To cancel/end a function, press & (q) while using the function. The images and items in the Touch menu cannot be changed.Stand-by (W)Stand-by (W) appears when the “CLR” key is touched or & (q) is pressed in the Touch menu. Stand-by (W) can be changed (nP. 108). Press & (q) while displaying Stand-by (W) to activate the camera. Press & (q) for 1+ seconds to activate 1Seg.■Submenu While using the function, quickly slide the finger from the upper right to the lower left (or from the upper left to the lower right) to display the Submenu.• Touch C of the control key or D on the upper part of the screen to display the Submenu.• Touch the area other than the Submenu to hide the Submenu. The Submenu in the normal position and menu in the operation guidance are displayed in the Submenu with the handset set to the viewer position. Operate or change the settings by selecting the Submenu in the same way as in the normal position (some menu cannot be selected depending on the screen).■Control key While using a function, touch the touch panel to show the control keys.• Touch the area other than the control keys to hide the control keys (excluding 1Seg). Also, if no operations are performed for approximately 7 seconds with the control keys shown, the control keys disappear. If there are extra keys other than those shown, touch F to show the next key. For details on control keys of each function nP. 41■Touch operation Easily operate with the finger without displaying the Submenu or control keys. For details on touch operation of each function nP. 41 i-appli that does not support the touch panel is not available in the viewer position. Switch to the normal position and operate. When the following items are displayed in Stand-by (W), touch the displayed item and operate. Touch the area other than displayed items to operate Stand-by (W).Stock iconNotice that 1Seg reservation recording is completed The control keys always appear in the shooting screen or while the music data is played. For the touch operation, be careful not to touch a key shown in the screen. Perform touch operation after hiding control keys while e-books, Word and Excel files, etc. are displayed.Example: 1Seg Example: MUSIC Playerdv62_E.book 39 ページ ２００８年１１月３日　月曜日　午後８時１８分
40e02_dv62_7e.fm[40/56]Before Using the Handset■Operations for menu and function Touch the touch menu or control keys to execute the functions.Example: Touch menu In the Submenu, list and data list screens, select the menu, items, or data by touching, moving the cursor and re-touching them.Example: [Camera] folder data list screen (Change theme: [Visual menu 1])• Keep the image with cursor touched and the image appears in the center of the screen. If there are multiple pages in the Submenu, list or data list screen, use one of the following methods to switch the pages.• Quickly slide the finger left/right.• Touch A/B or $/#, etc. (when they appear).• Touch an image behind the image currently shown (when Change theme is set to [Visual menu 1]). When scrolling the Submenu, slide the area in which the Submenu is displayed up/down with the finger. In the screen activated from the Submenu, operation guidance menu in the normal position may appear as the control keys. When having touched the data or item by mistake, slide the finger away from it to cancel the selection. Touch the “CLR” key or press & (q) to return to the previous screen.///dv62_E.book 40 ページ ２００８年１１月３日　月曜日　午後８時１８分
41e02_dv62_7e.fm[41/56]Before Using the Handset■While Full Browser is displayedControl key Control keys are not shown. Operate from the Submenu.Touch operation*1 Zoom bar can also be displayed from the Submenu. Slide the slider of zoom bar left/right or touch ＋/－ on the both ends of the zoom bar to zoom up/down the screen.*2 Not available when there is no history. Touch the tab on the upper part of the screen to switch windows. Touch a link to highlight and touch it again to view the linked site. Quickly slide the finger left/right or touch $/# to move the cursor to next/previous history in the Visual history screen.• Quickly slide the finger up/down or touch %/& to switch windows.■While a PC movie is played backControl key*1 May not appear for the PC movies which have restrictions on the operations such as the live distribution.*2 Keep key touched to fast forward/fast reverse.*3 Keep key touched to adjust the volume continuously. Settings can be changed from the Submenu.Touch operation■While 1Seg is being watchedControl key*1Keep key touched to select a station by searching a frequency. Touch [ to cancel the selection for station by searching a frequency. *2 Keep key touched to record video. Touch f to end recording.*3 Keep key touched to adjust the volume continuously. Settings can be changed from the Submenu.Touch operationControl key/Touch operation listKeep key touched To display a zoom bar*1Slide the finger up/down/left/right To scroll a screenQuickly slide the finger left/right To display next/previous page*2hTo fast forward*1, 2 WTo turn down the volume*3gTo pause/play*1 fTo stopiTo fast reverse*1, 2 eTo switch to the Full-screen modeVTo turn up the volume*3Quickly slide the finger up/down To adjust volumeYTo select a station with UP*1 XTo record 1Seg programs as a still picture*2ZTo select a station with DOWN*1VTo turn up the volume*3WTo turn down the volume*3Quickly slide the finger up/down To adjust volumeQuickly slide the finger left/rightTo select a station with UP/DOWNdv62_E.book 41 ページ ２００８年１１月３日　月曜日　午後８時１８分
42e02_dv62_7e.fm[42/56]Before Using the Handset■While camera is activatedControl key*1 Appears in the still picture shooting screen.*2 Touch P to return to the Normal shooting mode.*3 Appears in the movie shooting screen.*4 Appears while shooting a movie. Settings can be changed from the Submenu. In the preview screen after shooting still picture, the following keys appear.* Appears after shooting still pictures continuously. Submenu appears after shooting movie.Touch operation* The range of zoom is changed depending on how far the finger is slid left/right. When zooming up in a moment, double-touch the right edge of the screen. Focus and shoot as follows when the AF mode is set other than [Center AF], [Standard] or [Closeup].•Select [Def (people first)]: Touch the face detection frame to focus.• Select [Spot AF]: Touch a point to focus/touch the focus area.•Select [Manual focus]: Slide the finger left/right to focus/touch G.■While a message details screen is displayedControl key Settings can be changed from the Submenu.Touch operation* Alternatively, touch A/B to scroll a screen up/down. When touching during Decome-Anime playback screen display, a message details screen is displayed. Touch the highlighted data (nP. 187) or attached file to select it.■While an image is displayed from My picture/1Seg of Data boxControl key* Appears for Flash movies. Settings can be changed from the Submenu.Touch operation If the zoomed up image is displayed, slide the finger up/down/left/right to change the display position.GTo shoot with the normal shutter*1HTo switch to the Egao focus shutter mode*1, 2ITo switch to the Furimuki shutter mode*1, 2JTo start shooting*3fTo end shooting*4KTo save NTo save all*LTo clear OTo delete all*Slide the finger up/down To adjust the brightnessSlide the finger left/right To adjust the zoom*]To next mail/message ^To previous mail/messageSlide the finger up/down To scroll a screen up/down*Slide the finger left/rightTo next/previous mail or message Switch the display method for message details screen (nP. 44).gTo pause/play*]To next^To previousSlide the finger left/right To next/previousPutting the distance between two fingers apart/closerTo zoom up/downdv62_E.book 42 ページ ２００８年１１月３日　月曜日　午後８時１８分
43e02_dv62_7e.fm[43/56]Before Using the Handset■While i-motion is displayed from i-motion of Data boxControl key*1 Keep key touched to perform Fast reverse/Fast forward.*2 Keep key touched to adjust the volume continuously.*3 Appears when attaching is available. Settings can be changed from the Submenu.Touch operation■While a video is played back from 1Seg of Data boxControl key*1 Keep key touched to increase the speed to 6/2. Touch q to play back a video while performing Fast reverse/Fast forward.*2 Keep key touched to adjust the volume continuously. While stopped/paused, the following control keys appear.* Keep key touched to adjust the volume continuously. Settings can be changed from the Submenu.Touch operation* Operation is not available while stopped/paused. Operate during Fast reverse/Fast forward to increase the speed.■While e-book, etc. is displayedControl key Settings can be changed from the Submenu.Touch operation Touch a link to highlight and touch it again to view the linked site.■While Word or Excel files are displayedControl key Settings can be changed from the Submenu.Touch operationdTo previous*1 fTo stop gTo pause/play eTo switch to the Full-screen modecTo next*1VTo turn up the volume*2 lTo compose a message attached*3WTo turn down the volume*2Quickly slide the finger up/down To adjust volumeQuickly slide the finger left/right To next/previoussTo fast reverse*1 fTo stoprTo pause oTo return to a location of approx. 10 seconds beforetTo fast forward*1VTo turn up the volume*2 pTo skip to a location of approx. 30 seconds afterWTo turn down the volume*2qTo play WTo turn down the volume*VTo turn up the volume*Quickly slide the finger up/down To adjust volumeQuickly slide the finger left/right Fast reverse/Fast forward*5To top dLine-by-line/Frame-by-frame reversecLine-by-line/Frame-by-frame forwardQuickly slide the finger up/down/left/rightTo move between lines/frames]To next page ^To previous pageSlide the finger up/down/left/right To scroll a screenQuickly slide the finger left/right To next/previous pageDouble-touch To fit to screenPutting the distance between two fingers apart/closerTo zoom up/downdv62_E.book 43 ページ ２００８年１１月３日　月曜日　午後８時１８分
44e02_dv62_7e.fm[44/56]Before Using the Handset■While music data is playedControl key*1 Keep key touched to perform Fast reverse/Fast forward.*2 Keep key touched to adjust the volume continuously.*3 Appears while viewing images/lyrics.*4 Appears when multiple images/lyrics are saved. Settings can be changed from the Submenu.Touch operation■Entering terminal security codeIf the security code entry screen appears, enter the terminal security code by touching the displayed numbers.■Switching display method for message details screen <Hori screen mode>In the message details screen, touch [Hori screen mode] to display the message details screen in the left side of the screen. Re-touch to display in full-screen. Selecting is not possible in the normal position. The setting is valid only in the viewer position.Use this function for unsure operations. After the Support Book appears, check the explanation and operation procedures of each function. In addition, directly start functions that were looked up in the Support Book.1In stand-by, press $/[Support Book].2Select a menu or item/t.:To start functions directly: Select the function to start/t/[Yes].A FOMA card is an IC card that records personal information, such as phone numbers. A FOMA card can store phonebook data and SMS. By switching FOMA cards, multiple FOMA terminals can be used for different purposes as needed. If a FOMA card is not inserted, transmission functions such as voice/Videophone/PushTalk calls, i-mode, mail transmission and packet transmission are not available on the FOMA terminal. Before inserting or removing the FOMA card, turn off the power, position the back facing upwards and remove the battery pack. Close and hold the FOMA terminal firmly with your both hands.dTo previous song/To return to beginning of song*1 mTo view the list screen of music data for playbackgTo pause/play nTo display the folder list screencTo next*1VTo turn up the volume*2 KTo save images/lyrics*3WTo turn down the volume*2 .To view next images/lyrics*3, 4fTo stopQuickly slide the finger up/down To adjust volumeQuickly slide the finger left/right To next/previousOther operationsSupport BookDisplaying Support BookFOMA cardUsing FOMA cardInserting/Removing FOMA carddv62_E.book 44 ページ ２００８年１１月３日　月曜日　午後８時１８分
e02_dv62_7e.fm[45/56]45Continued on next pageBefore Using the Handset■Inserting FOMA card1Hook a finger on the tab and pull the tray out (1).:Pull out the tray straight until it stops.2Hold the FOMA card with the IC facing up and set on the tray (2).3Push the tray all the way in (3).■Removing FOMA card1Hook a finger on the tab, pull the tray out (1) and remove the FOMA card (2).:Do not allow the FOMA card to fall when removing it.The FOMA card has a “PIN1 code” and a “PIN2 code”.Both are set to [0000] by default but can be changed to a four- to eight-digit number by the user (nP. 125).The FOMA terminal has built-in FOMA card security functions (FOMA card restriction functions) as functions for protecting personal data and files. When data or files are retrieved using any of the following methods or i-appli is running with the FOMA card inserted into the FOMA terminal, FOMA card security functions are automatically set in the retrieved data or files.When a file such as an image, melody or PDF is downloaded from a site or Internet web pageWhen a site or Internet web page is saved as a screen memoWhen i-mode mail with a file attached is receivedWhen i-appli is running Data, files or software with FOMA card security functions run only when in use with the FOMA card inserted at time of acquisition. Display, play, attach to i-mode mail, run software, send data using Ir communication function and iC communication function, and copy to microSD Card can be executed. These operations cannot be performed if a different FOMA card is inserted. The following indicates the data for which FOMA card security is set.Melody Image (including animation and Flash movie)Screen memo Chaku-uta®/Chaku-uta full®Chara-den File attached to Message R/Fi-motion ToruCa (details) imagePDF data Image inserted to Deco-mail or signatureKisekae Tool Videophone picture memo Inserting or removing the FOMA card forcibly may damage the card or deform the tray. Use caution. Refer to the FOMA card user’s guide for more information on the FOMA card. Do not misplace the FOMA card once it is taken out. When the tray falls off, slide the tray in straight along the guide rail.NotchIC (gold)2Tray3Fit the notch of the FOMA card to that of the tray.1Tab12Security codesFOMA card security functions <FOMA card security functions>dv62_E.book 45 ページ ２００８年１１月３日　月曜日　午後８時１８分
46e02_dv62_7e.fm[46/56]Before Using the HandsetMachi-chara i-appli (including i-appli stand-by)Download dictionaryDownload fontContents transfer compatible dataImage in Message R/FMusic&Video Channel programDeco-mail template with data which FOMA card security functions are setDecome-Anime Templatee-book/e-dictionary/e-comic saved in the [Comic] folderFile attached to i-mode mail other than the following• ToruCa ・Phonebook ・Schedule• Bookmark ・Documents※“Chaku-uta” is a registered trademark of the Sony Music Entertainment (Japan) Inc. The following indicates the settings saved in the FOMA card.Own number PIN settingSelect language SSL certificatesSMS center SMS expirySMS input character The following explanation refers to the FOMA card inserted at time of data/files retrieval as “one’s own FOMA card” and other FOMA cards as “another’s FOMA card”. When one’s own FOMA card is replaced with another’s FOMA card, the data or files for which FOMA card security functions are set cannot be set as stand-by displays or ring tones. When a FOMA card is replaced with another’s FOMA card, FOMA card security functions are activated and if data or file retrieved from a site is set as the stand-by display or ring tone, the setting is reset to the default. When one’s own FOMA card is re-inserted, the setting returns.Example: When setting [Melody A], for which FOMA card security functions are set, as a ring toneWhen one’s own FOMA card is taken out or is replaced with another’s FOMA card, ring tone returns to default setting. When one’s own FOMA card is put back, the ring tone returns to [Melody A]. FOMA card security functions cannot be set for data received using Ir communication or data transmission functions, and still pictures/movies, etc. shot with the FOMA terminal.One’s own FOMA card security functions are set for downloaded data, files attached to received mail and i-appli that have been run, allowing viewing and playback of data.When another’s FOMA card is inserted, data with one’s own FOMA card security functions set cannot be viewed or played back.One’s own FOMA cardAnother’s FOMA cardDifferent FOMA card inserteddv62_E.book 46 ページ ２００８年１１月３日　月曜日　午後８時１８分
e02_dv62_7e.fm[47/56]47Continued on next pageBefore Using the HandsetNote the following differences between “FOMA card (blue)” and “FOMA card (green/white)” used on the FOMA terminal.Use the battery pack SH20 exclusive to the FOMA terminal. Turn off the power, close the FOMA terminal, and hold it in your both hands before attaching or removing the battery pack.■Attaching battery pack1Lightly push the back cover in the direction of the arrow (1), slide approximately 3 mm (2) and remove the back cover (3). It is possible to move or delete data or files for which FOMA card security functions are set even when another’s FOMA card is inserted. Running i-appli by selecting highlighted text in i-mode mail details screen cannot be performed or retrieved when FOMA card security functions are set. If the FOMA card is replaced with another’s FOMA card after i-appli stand-by is set, the set i-appli cannot be activated in stand-by, and the image set in Stand-by display appears.FOMA card typeFunction FOMA card (blue)FOMA card (green/white) PageNumber of phone number digits available in the FOMA card phonebookUp to 20 digits Up to 26 digits P. 94Client certificate operations for FirstPass Not available Available P. 190Use of WORLD WING Not available Available P. 438Service Numbers Not available Available P. 429About WORLD WINGWORLD WING is a DOCOMO’s FOMA international roaming service that makes it possible to use the mobile phone number registered in Japan to make and receive calls even overseas by the FOMA card (green/white) and supported FOMA terminal. If subscribed to the FOMA service after September 1, 2005, subscription for “WORLD WING” is not required. However, if subscription for “WORLD WING” is canceled at or after subscription for the FOMA service, subscription for “WORLD WING” is required again. If subscribed to the FOMA service before August 31, 2005 but not subscribed to “WORLD WING”, subscription for “WORLD WING” is required. Some payment plans are not available. When the FOMA card (green/white) is lost or stolen overseas, promptly contact DOCOMO and conduct a procedure for canceling the use of service. Refer to General Inquiries on the back of this manual for inquiries. Note that transmission/calling charges after the FOMA card is lost or stolen are incurred to the subscriber.Attaching/Removing battery packdv62_E.book 47 ページ ２００８年１１月３日　月曜日　午後８時１８分
48e02_dv62_7e.fm[48/56]Before Using the Handset2Attach the battery pack (4).:The battery pack has tabs that make it easy to attach. Attach the battery pack with a recycle mark side faced up.3Attach the back cover (5).:Attach the back cover as shown in the illustration and then push the back cover and slide into place.■Removing battery pack1Follow step 1 of “Attaching battery pack” to remove the back cover.2Remove the battery pack.:The battery pack has a “PULL” Tag that makes it easy to remove. Hold the “PULL” Tag between the fingers and lift up it in the direction of an arrow (45-degree from the FOMA terminal) to remove the battery pack.The battery pack is not fully charged at the time of purchase. Be sure to charge the battery using the exclusive AC or DC adapter (sold separately) before use.132Face the side with a recycle mark up4TabsBattery packBattery pack connector terminal sideTabs5 Using unnecessary force when attaching or removing the battery pack may damage the connector terminal for the battery pack (charger terminal) on the FOMA terminal. Firmly close the back cover. If not closed firmly, the back cover may come off and the battery pack may fall out due to vibration.Charging“PULL” Tagdv62_E.book 48 ページ ２００８年１１月３日　月曜日　午後８時１８分
e02_dv62_7e.fm[49/56]49Continued on next pageBefore Using the Handset■Cautions while charging Do not charge for long periods of time with the power left on. If the FOMA terminal is left on after charging is complete, the battery pack charge decreases. In such cases, the AC or DC adapter charges the battery again. However, depending on when the FOMA terminal is disconnected from the AC or DC adapter, the battery charge level may be low, the battery alert tone may sound, or the battery may only be usable for a short time. When the battery is empty and terminal is recharging, charging LED may not illuminate immediately. If the battery empty alert is displayed, the alert tone sounds and the power cannot be turned on, charge the battery for a while. If the battery empty alert is displayed and charging begins within 60 seconds of the alert tone, the status returns to normal. While charging, terminal may not turn on even when charging LED is illuminated in red. Charge longer and try turning power on again. Frequently recharging the battery when its power is still remaining enough may shorten the life of the battery pack. It is recommended to use the battery to a certain level before recharging. The battery pack cannot be charged by itself.■Estimated charge times and LED displayThe following figures are estimated times for charging an empty battery pack with the FOMA terminal turned off. Charging LED illuminates in red while charging, and it turns off when charging is completed. Check that the battery pack has been properly attached when charging LED flashes red. The LED also flashes red when the battery pack has reached the end of its service life. The battery pack can also be charged with the FOMA terminal turned on ({ on the display flashes during charging). When charging is completed, charging LED turns off, and { on the display changes to ". When the battery becomes warm, charging may automatically stop even if the battery has not been fully charged. Charging resumes after the temperature lowers to an appropriate temperature. While charging is stopped, charging LED turns off ({ on the display flashes while stopped).■Estimated times of use when fully charged Continuous talk time is estimated as the usage time at normal transmission signal strength, and continuous stand-by time is estimated as the usage time while moving with the FOMA terminal folded at normal signal strength. Using i-mode reduces talk (transmission)/stand-by time. When i-Channel is subscribed, information is automatically received and updated, so talk (transmission)/stand-by time will be reduced. In addition, when shooting or editing an image, watching 1Seg, composing i-mode mail, activating the downloaded i-appli or the i-appli stand-by, or using MUSIC Player, i-motion player, Bluetooth function or data communication, the talk (transmission)/stand-by time will be reduced even if calls or i-mode transmission are not made. Some i-appli software may continue transmission even after downloading. To avoid this, set not to connect in advance.FOMA AC Adapter 01/02 Approx. $$ minFOMA DC Adapter 01/02 Approx. $$ minContinuous talk timeFOMA/3G Voice call: Approx. $$ minVideophone call: Approx. $$ minGSM Voice call: Approx. $$ minContinuous stand-by timeFOMA/3G3G/GSM setting: 3GWhen mobile: Approx. $$ hr3G/GSM setting: AUTOWhen mobile: Approx. $$ hrAt rest: Approx. $$ hrGSM 3G/GSM setting: AUTOAt rest: Approx. $$ hr1Seg watching time Approx. $$ mindv62_E.book 49 ページ ２００８年１１月３日　月曜日　午後８時１８分
50e02_dv62_7e.fm[50/56]Before Using the Handset The actual usage time is a combination of stand-by time and talk time, and the longer the talk time, the shorter the stand-by time becomes. 1Seg watching time is estimated as the watching time at normal transmission signal strength with a flat-plug stereo earphone set P01 (sold separately) used. Talk (transmission)/stand-by time may be reduced by about half or 1Seg watching time may be shortened depending on battery pack status, function used, temperature and other environmental conditions, or signal strength (no signal or weak signal).■Battery pack service life Battery pack is a consumable product. Service time per charge is gradually reduced every time the battery is charged. When service time per charge is reduced to about half of the default time, this means that the battery pack is approaching the end of its service life. In such a case, it is recommended to replace the battery pack as soon as possible. Depending on usage, the battery pack may swell as it approaches the end of its service life but this will not cause problems. If i-appli, Videophone, or 1Seg is used while charging for a long time, the service life of the battery pack may become shorter than estimated. To protect the environment, return used batteries to NTT DOCOMO, any DOCOMO retailer, or a recycling agency.■About charging batteries Refer to user’s guide of FOMA AC Adapter 01/02 (sold separately), FOMA AC Adapter 01 for Global use (sold separately), or FOMA DC Adapter 01/02 (sold separately). FOMA AC Adapter 01 covers only 100V AC. FOMA AC Adapter 02/FOMA AC Adapter 01 for Global use covers from 100 to 240V AC. The shape of the plug for the AC adapter is for 100V AC (for domestic use). To use the AC adapter of 100 to 240V AC overseas, a conversion plug adapter that is compatible with the voltage of your country of stay is required. Do not use a transformer for use overseas to charge the battery.[Read “FOMA AC adapter 01/02 (sold separately) and FOMA DC adapter 01/02 (sold separately) user’s guide” carefully.] Battery pack can be charged even with the FOMA terminal opened or in the viewer position.1Open the external connector terminal cover (1) and insert the AC or DC adapter connector horizontally into the external connector terminal (2).:Check the direction (See diagram) of the connector, keep it parallel with the FOMA terminal and firmly push all the way in until it clicks.Charging by using AC adapter/DC adapterConnector (Face the side with the arrows up)Release buttonsExternal connector terminal coverCharging LEDExternal connector terminal21dv62_E.book 50 ページ ２００８年１１月３日　月曜日　午後８時１８分
e02_dv62_7e.fm[51/56]51Continued on next pageBefore Using the Handset2When inserting the AC adapter power plug into an outlet or inserting the DC adapter power plug into a car cigarette lighter socket, Charge start sound is heard, charging LED illuminates, and charging starts.3When Charge end sound is heard and charging LED turns off, charging is complete.:When removing the connector, always hold the release buttons on both sides (1) and unplug it by pulling out horizontally (2).[Read “Desktop holder SH22 (sold separately) user’s guide” carefully.] Battery pack can be charged with the FOMA terminal opened or in the viewer position.1Face the side with the arrows of the AC adapter connector up and insert it into the connector terminal of the desktop holder (1).:Keeping the connector parallel with the desktop holder, firmly push it all the way in until it clicks.2Insert the AC adapter power plug into an outlet (2).3When placing the FOMA terminal in the desktop holder, Charge start sound is heard, Charging LED illuminates, and charging starts.:Place the FOMA terminal as the figure shows (3), and push it in the direction of the arrow (4) until it clicks. Do not forcibly insert or remove. May cause damage to the external connector terminal and the connector.100V AC outletFor AC adapter For DC adapterCigarette lighter socket121 Pull the adapter out of the outlet or cigarette lighter socket if it will not be used for a long time. Do not forcefully pull the external connector terminal cover. May damage the cover. Do not place objects near the FOMA terminal when charging. May damage the FOMA terminal. In addition, a display may be damaged when charged in the viewer position.When using a DC adapter The DC adapter should only be used in negative grounded vehicles (12 and 24V DC). Do not use with the car engine shut off. May drain the car battery. The DC adapter fuse (2A) is a consumable. For replacement, purchase a new fuse at a local automobile supply shop. Refer to the FOMA DC Adapter 01/02 user’s guide for details.Charging by using desktop holderdv62_E.book 51 ページ ２００８年１１月３日　月曜日　午後８時１８分
52e02_dv62_7e.fm[52/56]Before Using the Handset4When Charge end sound is heard and charging LED turns off, charging is complete.:Hold the desktop holder and lift the FOMA terminal out.1In the Custom menu, select [Settings]/[General settings]/[Check status]/[Battery level].:Wait approximately 2 seconds and the display disappears.:The battery level sound is heard at the volume set in Key/Touch sound (nP. 104). Pull the AC adapter out of the outlet when left unused for a long period of time. When Charge start sound is not heard or when charging LED does not illuminate, check that the FOMA terminal is placed securely in the desktop holder (except when terminal is turned off, Manner mode is set or Charge start sound is Silent). When placing the FOMA terminal in the desktop holder, be careful that the strap is not caught in between the handset and the desktop holder. When the FOMA terminal placed in the desktop holder is set to the viewer position, operate while holding it so as not to come off from the desktop holder.Connector(Face the side with the arrows up) FOMA AC Adapter 01/02100V AC outlet34Charging LED12Battery levelChecking battery levelChecking battery level with sound and displayGraphicSound Three beeps Two beeps One beepStatusBattery is sufficiently full.Battery is running low.Battery is almost empty. Charge the battery."Battery level is still sufficient.#Battery level is low.$Battery is almost empty. Charge the battery.%Battery is empty (Power will turn off soon).{Battery pack is being charged.dv62_E.book 52 ページ ２００８年１１月３日　月曜日　午後８時１８分
53e02_dv62_7e.fm[53/56]Before Using the Handset[Battery empty. Unsaved data will be lost. Ending current operation] appears if battery starts to run out (Press t to clear the message). After a while, an alert tone sounds. The warning screen stating that the battery runs out appears, handset operations are disabled and power turns off after approximately 60 seconds. During a voice/Videophone call, the alert tone sounds and [Battery empty. Unsaved data will be lost. Ending current operation] appears. The call is disconnected after approximately 20 seconds. At the same time, the screen above appears and after approximately 60 seconds, the power turns off. Alert tone does not sound when Manner mode or Public mode (Drive mode) is set (Alert tone sounds during a call).1Press H (for 2+ seconds).:It may take some time for the wakeup screen to appear.:The wakeup screen appears followed by the initial settings screen. Proceed to Initial setting (nP. 54).:If initial settings have been completed, the screen shown on the right appears when power is turned on. This screen is called the “stand-by display”.Welcome mail:“Welcome$デコメアニメ%&” (Welcome$Decome-Anime%&) and “緊急速報「エリアメール」のご案内” (Information of Early Warning “Area Mail”) are saved by default.:To check a welcome mail: In stand-by, press t/select the stock icon C (mail message)/t.• For details on the following operations nP. 1541Press H (for 2+ seconds).:It may take some time for the power to be turned off (The end screen appears on the display until the power is turned off).If battery runs outPower ON/OFFTurning power ON/OFFTurning power ON If initial settings are not yet completed, the setting screen appears every time the power is turned on. If the FOMA card is not inserted, [Insert UIM] and a FOMA card error appear (nP. 31). When [Enter PIN1 code] appears, enter the PIN1 code (nP. 125). When a FOMA card is replaced with a new card, the terminal security code (four to eight digits) must be entered after turning on the terminal. If a correct terminal security code is entered, stand-by display appears. When a wrong terminal security code is entered five times, the power is turned off. However, turning on the power again is possible. When A appears, the handset is outside the service area or in a place with no signal. Move to a place where the icon disappears.Turning power OFFStand-by displaydv62_E.book 53 ページ ２００８年１１月３日　月曜日　午後８時１８分
54e02_dv62_7e.fm[54/56]Before Using the Handset1In the Custom menu, select [設定]/[一般設定]/[Bilingual]/[English].:To switch the display language from English to Japanese: In the Custom menu, select [Settings]/[General settings]/[Select language]/[日本語].The initial settings screen appears automatically when the power is turned on for the first time. Each setting item can also be set from Menu (When the initial settings are complete, the stand-by display appears). When items that have not been set remain, the setting screen appears every time the power is turned on.1Set the date and time (nP. 54).2Register a terminal security code (nP. 123).3Set the Key/Touch sound (nP. 104).4Set GPS Location provision ON/OFF (nP. 318).5Set the font size (nP. 119).:When the initial settings are complete, the software update function confirmation screen appears. Read the description and select [Agree] (When the initial settings are made from the menu or the software update is set to other than [auto-update], the confirmation screen does not appear).Set the date and time on the FOMA terminal.1In the Custom menu, select [Settings]/[General settings]/[Date settings].2Select the [Auto time correction] field/t/select the setting.;Select [ON]/i.;Select [OFF]/select the [Date] field/t/enter the date/t/select the [Time] field/t/enter the time (24-hour format)/t/i.• When entering month, day and time, add 0 before numbers one through nine (example: 01, 02, 03, etc.).• Set the date and time from 00:00 January 1, 2001 to 23:59 December 31, 2050.Select languageChanging screen display to English If a FOMA card is inserted, settings are saved to the FOMA card as well. When the setting of the FOMA terminal handset and the setting of the inserted FOMA card are different, the setting in the FOMA card is prioritized.Initial settingMaking initial settingDate and time settings Change terminal security codeKey/Touch sound Location request menuFont size settings Press H to cancel the initial settings.Date settingsSetting date and time When Limit settings is set to [Enable], the terminal security code must be entered in the Date settings.dv62_E.book 54 ページ ２００８年１１月３日　月曜日　午後８時１８分
55e02_dv62_7e.fm[55/56]Before Using the Handset■Changing time zone manually <City>1In the Date settings screen, select the [Auto time correction] field/t/[OFF]/C.2Select a time zone/t.3Select a city/t/i.Display your number (caller ID) on the other party’s phone (display) when making a voice/Videophone/PushTalk call. Handset number (caller ID) is important personal information. Be very careful about your caller ID setting. The Notify caller ID function is available only on compatible phone devices. The date and time that are set are saved even if the battery pack is removed, but if the battery pack remains removed for approximately 30 seconds or more, the settings are reset. Also, if the battery remains empty, the settings may be reset. When this happens, set again after charging the battery. If the date and time are not set correctly, the following functions cannot be used properly.Redial, Received calls Auto power ON/OFFAlarm ScheduleSSL (authentication) i-appli Auto startStarting i-appliDX Reception, RecordingMachi-chara Software updatePattern definitions updateRecord message (voice), Record message (Videophone calls)Camera image titles/shooting datePlayback of i-motion or music data with expiration date/period for replay.View of e-books/e-dictionaries/e-comics with expiration date/period for browse.When Auto time correction is set to [ON] When the power is turned on, the FOMA terminal adjusts the time by connecting to the network’s time information. If the FOMA terminal does not adjust the time even when the power is turned on, turn off the power and restart. Time may not be adjusted depending on the signal status. Time may be off by a few seconds. When time difference is adjusted overseas, the local time and date and ! appear in Redial, Received calls, Received/Sent messages history (SMS only), and Received/Sent messages list. The received/sent messages are not displayed in order of the displayed time and date but the mail reception/send. ! does not appear in the Unsent messages for mail messages. If the date order display is set for the Unsent messages, unsent messages are displayed in the order of the displayed time and date. Time correction may not be performed depending on the overseas network. During overseas use, Japan time and local time (or time set in City) appear in the dual display except for the following cases.When Auto time correction is set to [ON] and time correction information is not being received from an overseas networkWhen Auto time correction is set to [OFF] and City is set to the city in the same time zone as JapanNotify caller IDNotifying the other party of your phone numberdv62_E.book 55 ページ ２００８年１１月３日　月曜日　午後８時１８分
56e02_dv62_7e.fm[56/56]Before Using the Handset1In the Custom menu, select [Settings]/[NW Services]/[Notify caller ID].2Select [Activate/Deactivate].:To check the setting: Select [Check setting].3Select the setting.:To notify caller ID: Select [Yes].:To not notify caller ID: Select [No]. When checking your own phone number during a call nP. 591In the Custom menu, press 0.:Alternatively, select [Phone]/[Owner Information].:To switch between Number A and Number B (when 2in1 [Dual mode] is used): Press i.Setting Notify caller ID/No caller ID in advance Notify caller ID setting cannot be set from outside the service area.Own numberChecking your own phone number When changing the Number B of 2in1, use any of the following methods to obtain the correct Number B.Set 2in1 function OFF and then perform 2in1 setting again to set 2in1 function ONCheck the 2in1 subscription When a FOMA card exchange (2in1 subscriber b 2in1 nonsubscriber) is performed, set 2in1 function OFF. When a FOMA card exchange (2in1 subscriber b 2in1 subscriber) is performed, check the 2in1 subscription. For details on Owner information nP. 395dv62_E.book 56 ページ ２００８年１１月３日　月曜日　午後８時１８分
438e20_dv62_7e.fm[438/446]Overseas Use~~~~~ ~~~~~ ~~~~~ ~~~International roaming (WORLD WING) is a service that enables you, using overseas telecommunications carrier’s networks, to make calls and use i-mode.Use this FOMA terminal for voice/Videophone calls, i-mode and SMS with the phone number and mail address used in Japan. Network services such as Voice Mail and Call Forwarding Services can also be used. This service is available in the 3G network and GSM/GPRS network service areas. Refer to the DOCOMO “International Services website” for details on the area. By default, the FOMA terminal is set to automatically switch networks (nP. 444).Country codes of major countriesThe following shows “Country code” used when making international calls (nP. 65) or setting International dial assist (nP. 66). For other country codes and details, refer to the DOCOMO “International Services website”.Outline of international roaming (WORLD WING)Country/Region Code Country/Region CodeAustralia 61 Maldives 960Austria 43 Netherlands 31Belgium 32 New Caledonia 687Brazil 55 New Zealand 64Canada 1 Norway 47China 86 Peru 51Czech 420 Philippines 63Egypt 20 Russia 7Fiji 679 Singapore 65Finland 358 South Korea 82France 33 Spain 34Germany 49 Sweden 46Greece 30 Switzerland 41Hong Kong 852 Tahiti(French Polynesia)689Hungary 36India 91 Taiwan 886Indonesia 62 Thailand 66Italy 39 Turkey 90Japan 81 U.K. 44Macau 853 U.S.A. 1Malaysia 60 Vietnam 84dv62_E.book 438 ページ ２００８年１１月３日　月曜日　午後８時１８分
e20_dv62_7e.fm[439/446]439Continued on next pageOverseas UseThe available communication services overseas are as follows. Some communication services are not available depending on the network/carrier. Refer to the DOCOMO “International Services website” for details. Packet transmission charges are separately incurred for the transmission included in monthly usage fees of i-Channel (nP. 194) overseas. If Widget appli attempts transmission when the i-Widget screen appears, packet transmission charges are incurred for each transmission overseas. Unable to use 64K data communication by connecting a PC, etc. overseas. 日英版しゃべって翻訳 for SH (J-E Speech Translation for SH) is available overseas (nP. 280). GPS function is not available overseas. An error screen appears and packet transmission charges are incurred when the site of GPS Service settings is accessed overseas. Overseas packet transmission charges differ from those in Japan. When the 2in1 is used, calling from Number B is not available overseas. When Multi Number is used, calling from Additional Number is not available overseas.The following items must be checked before departure, at your country of stay, and after homecoming.Prepare below in Japan before using the FOMA terminal overseas.■About contract If subscribed to the FOMA service after September 1, 2005, a subscription for “WORLD WING” is not required. However, if a subscription for “WORLD WING” is canceled at or after a subscription for the FOMA service, a subscription for “WORLD WING” is required again. If subscribed to the FOMA service before August 31, 2005 but not subscribed to “WORLD WING”, a subscription for “WORLD WING” is required. Some payment plans are not available.Available services overseasCommunication serviceExplanation 3G GSMGPRSVoice call Make or receive calls in your country of stay or make international calls to Japan or to other countries with the same phone number as used in Japan while abroad.AAAVideophone Make international Videophone calls to users of the specified 3G telecommunications carriers overseas and FOMA users in Japan.ABBi-mode mail Send or receive i-mode mail overseas with the same address as used in Japan. ABAi-mode Use i-mode overseas. ABAi-Channel Use i-Channel overseas. ABAi-concier Use i-concier overseas. ABAi-Widget Use i-Widget overseas. ABASMS Send or receive SMS overseas with the same phone number as used in Japan. AAAData communication (packet transmission)Use packet transmission overseas. ABABefore use overseasPreparation before departuredv62_E.book 439 ページ ２００８年１１月３日　月曜日　午後８時１８分
440e20_dv62_7e.fm[440/446]Overseas Use~~~~~ ~~~~~ ~~~~~ ~~~ Insert the WORLD WING compatible FOMA card (other than blue) to the FOMA terminal (nP. 44).■About charging batteries Precautions for handling the AC adapter nP. 16 Methods for charging the AC adapter nP. 48■About browsing i-mode sitesTo browse i-mode site overseas, the settings for overseas use must be made from iMenu in advance.i-mode site: Select [iMenu]/[English]/[Options]/[International Settings]/[i-mode services Settings]. Refer to “Mobile Phone User’s Guide [International Services]” and “Mobile Phone User’s Guide [i-mode] FOMA version” for details.■About setting network serviceIf subscribed to network services, Voice Mail Service, Call Forwarding Service or other services can be used overseas. Some network services may not be set or checked depending on overseas telecommunications carrier. In addition, some network services are available only in Japan. Refer to “Mobile Phone User’s Guide [International Services]” and “Mobile Phone User’s Guide [Network Services]” before departure. To use network services overseas, set Remote Control (nP. 430, P. 446) to “Activate”.■About inquiries overseasFor lost, stolen, and cost settlement, or malfunction of the FOMA terminal overseas, refer to “Loss or theft of FOMA terminal or payment of cumulative cost overseas” or “Failures encountered overseas” on the back of this manual. Note that any call or transmission charges incurred after the FOMA terminal is lost or stolen are charged to the subscriber. Add the “International call access code (Table 1)” or “International prefix number for the universal number (Table 2)” that is assigned to your country of stay, to the head of your phone number for inquiries. For the latest information of the international call access code and the international prefix number for the universal number, refer to the DOCOMO “International Services website”.International call access codes of major countries (Table 1)The following shows the International call access codes of major countries. Communication charges to Japan will apply.Country/Region Code Country/Region CodeAustralia 0011 Monaco 00Belgium 00 Netherlands 00Brazil 0021/0014New Zealand 00Norway 00Canada 011 Philippines 00China 00 Poland 00Czech 00 Portugal 00Denmark 00 Russia 810Finland 00 Singapore 001France 00 South Korea 001Germany 00 Spain 00Greece 00 Sweden 00Hong Kong 001 Switzerland 00Hungary 00 Taiwan 002India 00 Thailand 001Indonesia 001 Turkey 00Ireland 00 U.A.E. 00Italy 00 U.K. 00Luxemburg 00 U.S.A. 011Macau 00 Vietnam 00Malaysia 00dv62_E.book 440 ページ ２００８年１１月３日　月曜日　午後８時１８分
441e20_dv62_7e.fm[441/446]Overseas UseInternational prefix number for the universal number (Table 2)The following shows the International prefix number for the universal number of each country. Communication charges or other charges to your country of stay will apply. Communication charges to your country of stay will apply when calling from the mobile phone. Some codes may not be used. Note that the universal number may not be used for calls from a mobile phone, payphone or hotel. The universal number can be used only for countries listed above. Calling from a hotel may cost you extra call charges requested by the hotel (You are responsible for the call charges). Confirm with the hotel before making calls.The service is available in the 3G network and GSM/GPRS network service areas.The FOMA terminal is set to automatically search for the network when the power is turned on, and to be connected to the available telecommunications carrier in your country of stay. If the connected telecommunications carrier is changed when Auto time correction (nP. 54) is set to [ON], a screen notifying that time difference is adjusted may appear. When Operator name display (nP. 445) is set to [Display on], the telecommunications carrier connected appears in stand-by. When Clock display (nP. 109) is set to [ON(Large)], the local time and Japan time appear (excluding regions keeping the same standard time as Japan time). The local time appears on the sub display. Talk time or stand-by time may be reduced to half the normal time depending on the network condition of your country of stay.By default, the FOMA terminal is set to automatically search for the network and to be connected to the FOMA network when the power is turned on after homecoming.Reset the Network search mode to the FOMA network (DOCOMO). If the Network search mode is set to [Manual], switch to the FOMA network (DOCOMO) manually or change to [Auto]. Set the 3G/GSM setting to [AUTO] or [3G].Country/Region Code Country/Region CodeArgentina 00 Luxemburg 00Australia 0011 Malaysia 00Austria 00 Netherlands 00Belgium 00 New Zealand 00Brazil 0021 Norway 00Bulgaria 00 Peru 00Canada 011 Philippines 00China 00 Portugal 00Columbia 009 Singapore 001Denmark 00 South Africa 09Finland 990 South Korea 001France 00 Spain 00Germany 00 Sweden 00Hong Kong 001 Switzerland 00Hungary 00 Taiwan 00Ireland 00 Thailand 001Israel 014 U.K. 00Italy 00 U.S.A. 011Using at your country of staySetting after homecomingdv62_E.book 441 ページ ２００８年１１月３日　月曜日　午後８時１８分
442e20_dv62_7e.fm[442/446]Overseas Use~~~~~ ~~~~~ ~~~~~ ~~~Make a call from overseas using the international roaming service.Make a call from your country of stay to Japan or other countries.1In stand-by, enter [+] (press 0 for 1+ seconds), country code, area code (city code) and other party’s phone number.:When the area code (city code) begins with 0, omit the 0 when dialing (However, include 0 when making a call to landline phones in some countries or regions such as Italy).2Press s (Phone)/i (V.phone).■Making an international call outside your country of stay using Country code conversionSet Country code conversion (nP. 66) to [ON] and set the country code frequently called to easily make an international call. 0 at the beginning of a phone number is automatically converted to the country code set in Country code conversion.Example: Make a call from phonebook1In stand-by, press a/select the other party.2Press s (Phone)/i (V.phone).3Select [Call].:To dial a phone number as stored in the phonebook: Select [Original number].■Making a call to the phone in country saved in Set country codeSave a country code using Set country code (nP. 67) to select a country code before making an international call. The following operation is available overseas only.1In stand-by, enter a phone number/C/[Add prefix setting]/[International Call].2Select the country code/t.3Press s (Phone)/i (V.phone).Make a domestic call at your country of stay in the same way as you do in Japan.1In stand-by, enter a phone number.2Press s (Phone)/i (V.phone).:Always dial the area code (city code), even when the number is in the same area.:When making a domestic call at your country of stay using the phonebook, select [Original number] in step 3 of “Making an international call outside your country of stay using Country code conversion” on P. 442.Making a call at your country of stayMaking a call outside your country of stay (including Japan)Making a call in your country of stay Refer to the DOCOMO “International Services website” for details on available countries, country codes and telecommunications carriers. Even when Notify caller ID of the network service (nP. 55) is set to “Send ID”, [Unavailable] or [User unset] appears depending on the telecommunications carrier, and the caller ID may not be displayed correctly.dv62_E.book 442 ページ ２００８年１１月３日　月曜日　午後８時１８分
443e20_dv62_7e.fm[443/446]Overseas UseWhen making a call to a “WORLD WING” subscriber overseas, make an international call to Japan regardless of your country of stay.1In stand-by, enter [+] (press 0 for 1+ seconds), country code 81 (Japan), the other party’s mobile phone number excluding 0.2Press s (Phone)/i (V.phone).Receive a call overseas in the same way as you do in Japan.1Press s to receive an incoming call.:Speak to the caller.■Having calls made to your FOMA terminal from JapanTo receive an international call from Japan, have your phone number dialed just as a domestic call in Japan.090 (or 080)-XXXX-XXXX Calling from Received calls may not be available since the phone number may not be displayed correctly.■Having calls made to your FOMA terminal from countries other than JapanHave the international call access code and 81 (Japan) added to the beginning of your phone number, and 0 excluded as an international call to Japan regardless of your country of stay.International call access code of the country of the caller-81-90 (or 80)-XXXX-XXXXSet the communication system supporting your area and telecommunications carrier.1In the Custom menu, select [Settings]/[Phone settings]/[Other settings]/[International Roam.]/[3G/GSM setting].2Select the communication method/t.Making a call to a WORLD WING subscriber overseasReceiving a call overseas Even when a caller tried to notify of caller ID, it might not be notified depending on the used telecommunications carrier. When a call is received during international roaming, the call is forwarded from Japan. Call charges to Japan are incurred by the caller and receiving charges by the receiver.Having calls to your FOMA terminal3G/GSM settingSetting network communication systemdv62_E.book 443 ページ ２００８年１１月３日　月曜日　午後８時１８分
444e20_dv62_7e.fm[444/446]Overseas Use~~~~~ ~~~~~ ~~~~~ ~~~ Set to manually select a telecommunications carrier. Re-search a network to set another telecommunications carrier. Check that the Network search mode is set to [Auto] when A appears even after homecoming.1In the Custom menu, select [Settings]/[Phone settings]/[Other settings]/[International Roam.]/[Network search mode].2Select the setting.;Select [Auto]/[Yes].• When [Auto] is set: Select [Auto].;Select [Manual]/select a telecommunications carrier/t.• The telecommunications carrier is changed.;Select [Network re-search].• The host network is changed automatically if the Network search mode is set to [Auto]. If set to [Manual], select a telecommunications carrier and press t.Check the status whether making a call, data transmission or packet transmission is available.1In the Custom menu, select [Settings]/[Phone settings]/[Other settings]/[In-area status]/[Agree].Specify the priority order of telecommunications carriers connected to when the Network search mode is set to [Auto]. Save up to 20.1In the Custom menu, select [Settings]/[Phone settings]/[Other settings]/[International Roam.]/[Network search mode]/[PLMN setting].:To check the saved telecommunications carrier’s detailed information: Select the telecommunications carrier/t.2Select the number of the priority order/C.3Select the saving method.;Select [PLMN manual select]/enter a country code (MCC)/t/enter a network code (MNC)/t/select a communication method/t.;Select [UPLMN by list]/select a telecommunications carrier/t/select a communication method/t.• To search a telecommunications carrier from country name: Select [UPLMN by list]/C/select a country name/t/select a telecommunications carrier/t/select a communication method/t.;Select [Set VPLMN to PLMN].• Save the telecommunications carrier currently connected to.;Select [Change priority]/select a destination/t.;Select [Delete]/[Delete one].;Select [Delete]/[Delete all]/enter the terminal security code/t.4Select [Yes].Network search modeSetting a search method of telecommunications carrierChecking communication services available <In-area status>PLMN settingSetting a telecommunications carrier to preferentially connect todv62_E.book 444 ページ ２００８年１１月３日　月曜日　午後８時１８分
445e20_dv62_7e.fm[445/446]Overseas UseSet whether to display a telecommunications carrier name currently connected to in stand-by during international roaming.1In the Custom menu, select [Settings]/[Phone settings]/[Other settings]/[International Roam.]/[Operator name disp].2Select the setting/t/[Yes].■When displaying a telecommunications carrierWhen a call is received during international roaming, the caller hears the guidance stating that international roaming is activated. Make this setting while still in Japan.1In the Custom menu, select [Settings]/[Other NW Services]/[Roaming guidance].2Select an item/t.3Select [Yes].Set the FOMA terminal to reject calls during roaming. Select whether to bar all incoming calls or only the Videophone and 64K data communication calls. Depending on the overseas telecommunications carrier, the setting cannot be made. Unable to use 64K data communication overseas.1In the Custom menu, select [Settings]/[Phone settings]/[Other settings]/[International Roam.]/[Call barring].2Select an item.;Select [Activate]/[Yes]/select the barring method/t/enter the network security code/t.;Select [Deactivate]/[Yes]/enter the network security code/t.;Select [Check setting].Operator name dispDisplaying a telecommunications carrier during roamingRoaming guidanceActivating roaming guidanceTelecommunications carrier nameCall barringSetting incoming call to reject during roamingdv62_E.book 445 ページ ２００８年１１月３日　月曜日　午後８時１８分

Navigation menu