Sharp HRO00082 Cellular Phone User Manual 2

Download:
Mirror Download [FCC.gov]
Document ID	1035751
Application ID	q2cRYyap3exP4F+2nqoUaA==
Document Description	Users Manual 2
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	148kB (1850020 bits)
Date Submitted	2008-11-25 00:00:00
Date Available	2009-01-09 00:00:00
Creation Date	2008-11-05 16:45:40
Document Lastmod	2008-11-18 15:07:27
Document Title	Users Manual 2

dv62_E.book
35 ページ
２００８年１１月３日
月曜日
午後８時１８分
Cautions when using the Optical TOUCH CRUISER
Setting and selecting menu
Set, change or save functions from the menu screens.
For details on operations in the viewer position nP. 37
The explanations in this manual are based on how to retrieve a
function from the Custom menu.
Setting start menu 
Set the start menu that displayed when t is pressed in stand-by.
Setting whether to use Optical TOUCH CRUISER

In the Custom menu, select [Settings]/[General
settings]/[TOUCH CRUISER set]/[Usage
settings].
Select the setting/t.
Setting pointer speed/scroll speed

In the Custom menu, select [Settings]/[General
settings]/[TOUCH CRUISER set]/[Pointer
speed]/[Scroll speed].
Select the speed/t.
Start menu
Characteristics
Custom menu The preset Kisekae Tool (nP. 113) can be selected
and set. Each Kisekae Tool consists of different
functions and designs. Kisekae Tools can be
downloaded from sites and used.
Preset Kisekae Tools
 White
 Black
 Pink
 拡大メニュー(Large)
 シンプル(Simple)
 ダイレクトメニュー
※ Preset Kisekae Tools differ depending on the
FOMA terminal handset color.
Basic menu
Before Using the Handset
Do not operate the Optical TOUCH CRUISER using a pointed
metallic object such as a pen tip. May cause scratches or a failure
of the sensor.
Note that putting a sticker, etc. to the operating range may cause
a malfunction.
Because the Optical TOUCH CRUISER detects motions of the
fingerprint, it may not operate properly depending on the condition
of the finger (when foreign objects, such as dust, sand, etc. are
attached to the finger).
Select the icon displayed on the menu to retrieve the
function. Also, input the function number, which is
assigned to each function, to quickly retrieve the
function to be used.
In stand-by, press t/[Settings]/[Disp/LED/
Power saver]/[Menu priority].
Select the start menu/t/[Yes].
: In the Custom menu/Basic menu: Press C/[Menu priority].
35
e02_dv62_7e.fm
[35/56]
dv62_E.book
36 ページ
２００８年１１月３日
月曜日
午後８時１８分
■ Switching set start menu temporarily
Before Using the Handset
Switch the start menu temporarily. When the stand-by display
reappears, the start menu returns to the one set in Menu priority.
Use the Shortcut menu to retrieve saved functions quickly. Other
functions can also be saved in the Shortcut menu (nP. 393).
Retrieving a function from each menu
For details on operating shortcut menu nP. 393
For details on the available functions nP. 454
Use w and the Optical TOUCH CRUISER in either menu.
Press the dial key corresponding to the menu item number (U, V,
W, etc.) to select a function. However, in the Custom menu, a
function may not be selected by using the menu item numbers.
The method for selecting functions may differ depending on the
Kisekae Tool set for the Custom menu.
Press c to re-select a function, and the previous screen
reappears. Press H to return to stand-by.
When a stock icon (nP. 32) appears in stand-by, select G to
show the each menu.
Stand-by
The way of activating 1Seg with Multi guide key or Optical TOUCH
CRUISER is explained as an example below.
For , (;), use the Optical TOUCH CRUISER to select an
item.
The following shows the screen operated with the Optical TOUCH
CRUISER.
Shortcut menu
■ Retrieving from the Custom menu
(;)
Custom menu
Basic menu
Custom menu
36
e02_dv62_7e.fm
[36/56]
(;)
or
or
When [1Seg]
appears
When 1Seg is
activated
dv62_E.book
37 ページ
２００８年１１月３日
月曜日
午後８時１８分
■ Retrieving from the Basic menu
Operations in viewer position
(;)
or
or
In the viewer position, operate by putting the finger on the
touch panel (screen).
Before Using the Handset
(;)
Touch panel
In other than the viewer position, the touch panel is available during
Videophone (nP. 78).
Touch panel
Basic menu
When [1Seg]
When 1Seg is
appears
activated
In the Basic menu, input the function number, which is assigned to
setting menu, to quickly retrieve the function to be used
(nP. 454).
When the Custom menu image is changed by Kisekae Tool, the
operation may differ from the description in this manual. In this
case, switch the menu screen to the Basic menu (nP. 35) or
perform the Reset menu screen (nP. 115).
The operations differ depending on the function and screen in use.
In addition, the message stating that the operation is not available
appears when the touch panel cannot be used.
Operate the touch panel inside the following operating range of touch
panel. However, when a substitute image appears in the right side of the
screen, operate in the left side of the screen where functions are shown.
Operating range of the touch panel
Selecting a function from Submenu
When [Submenu] appears in the Operation
guidance, press C to display functions
(Submenu) that can be used in the screen. Select
the displayed Submenu with w or the Optical
TOUCH CRUISER. If there are multiple pages in
the Submenu, change pages with w or the
Optical TOUCH CRUISER.
Alternatively, press the dial key corresponding to
the menu item number (U, V, W, etc.) to select
a function. However, some Submenus do not
have item numbers.
The notation of operation described in this manual and its meaning
are shown below.
Touch
Put the finger on the touch
panel and put it off.
Submenu screen
Double-touch
Quickly touch the same point twice.
Continued on next page
e02_dv62_7e.fm
[37/56]
37
dv62_E.book
38 ページ
２００８年１１月３日
月曜日
午後８時１８分
Slide
Keep the finger on the
touch panel and slide it.
Using menus or functions
Before Using the Handset
Retrieve functions such as Full Browser or 1Seg from the Touch menu.
Operating or changing settings with the Submemu or control key is
available while using each function (touch operation is also available).
■ Touch menu
Quick slide
Quickly slide the finger and
put it off.
Putting the distance between two fingers apart/closer
Put two fingers on the
touch panel and slide them
with putting the distance
between two fingers apart/
closer.
If the screen is switched from the
normal position to the viewer
position in the stand-by display,
Custom menu, Basic menu or
others, Touch menu appears.
• Functions to activate when
setting the handset to the viewer
position in the stand-by display can be changed (nP. 382).
Touch the touch panel while displaying Stand-by (W) in the viewer
position to display the Touch menu.
The following functions can be retrieved from the Touch menu.
Map/GPS appli*1
Shoot movie
When using the touch panel
The touch panel does not work when operated with a gloved
finger or with foreign objects placed on the operation pad.
Note that operating with a wet finger or putting a sticker to the
touch panel (display) may cause a malfunction.
38
e02_dv62_7e.fm
[38/56]
Mail
1Seg
LifeKit
Shoot still pic
Inbox
My picture
i-motion
Bookmark
1Seg
Camera
When putting the finger on the touch panel, the tone sounds and the
vibrator is activated (excluding while activating Touch menu and a camera).
• The volume can be changed (nP. 104). The tone cannot be changed.
• The vibrator can be set to ON/OFF (nP. 105).
Data box
Full Browser Home
Manga&Book
Reader
Document Viewer
MUSIC Player*2
Outbox
Unsent messages
Compose
message
*1 “Mapping appli” (nP. 312) is started. i-appli to start can be
changed from the Map setting (nP. 277, P. 311).
*2 The music is played from the spot where the playback stopped
previously.
dv62_E.book
39 ページ
２００８年１１月３日
月曜日
午後８時１８分
To cancel/end a function, press & (q) while using the function.
The images and items in the Touch menu cannot be changed.
i-appli that does not support the touch panel is not available in the
viewer position. Switch to the normal position and operate.
When the following items are displayed in Stand-by (W), touch the
displayed item and operate. Touch the area other than displayed
items to operate Stand-by (W).
 Stock icon
 Notice that 1Seg reservation recording is completed
■ Submenu
While using the function, quickly slide the finger from the upper right
to the lower left (or from the upper left to the lower right) to display
the Submenu.
■ Control key
While using a function, touch the touch panel to show the control keys.
Example: 1Seg
Example: MUSIC Player
• Touch the area other than the control keys to hide the control
keys (excluding 1Seg). Also, if no operations are performed for
approximately 7 seconds with the control keys shown, the control
keys disappear.
If there are extra keys other than those shown, touch F to show
the next key.
For details on control keys of each function nP. 41
Before Using the Handset
Stand-by (W)
Stand-by (W) appears when the
“CLR” key is touched or & (q) is
pressed in the Touch menu.
Stand-by (W) can be changed
(nP. 108).
Press & (q) while displaying
Stand-by (W) to activate the
camera.
Press & (q) for 1+ seconds to activate 1Seg.
The Submenu in the normal position and menu in the operation
guidance are displayed in the Submenu with the handset set to the
viewer position. Operate or change the settings by selecting the
Submenu in the same way as in the normal position (some menu
cannot be selected depending on the screen).
The control keys always appear in the shooting screen or while the
music data is played.
■ Touch operation
Easily operate with the finger without displaying the Submenu or
control keys.
For details on touch operation of each function nP. 41
• Touch C of the control key or D on the upper part of the
screen to display the Submenu.
• Touch the area other than the Submenu to hide the Submenu.
For the touch operation, be careful not to touch a key shown in the
screen.
Perform touch operation after hiding control keys while e-books,
Word and Excel files, etc. are displayed.
39
e02_dv62_7e.fm
[39/56]
dv62_E.book
40 ページ
２００８年１１月３日
月曜日
午後８時１８分
■ Operations for menu and function
• Keep the image with cursor
touched and the image
appears in the center of the
screen.
Touch the touch menu or control keys to execute the functions.
Example: Touch menu
Before Using the Handset
In the Submenu, list and data list screens, select the menu, items,
or data by touching, moving the cursor and re-touching them.
Example: [Camera] folder data list screen (Change theme: [Visual
menu 1])
40
e02_dv62_7e.fm
[40/56]
If there are multiple pages in the Submenu, list or data list screen,
use one of the following methods to switch the pages.
• Quickly slide the finger left/right.
• Touch A/B or $/#, etc. (when they appear).
• Touch an image behind the image currently shown (when Change
theme is set to [Visual menu 1]).
When scrolling the Submenu, slide the area in which the Submenu
is displayed up/down with the finger.
In the screen activated from the Submenu, operation guidance
menu in the normal position may appear as the control keys.
When having touched the data or item by mistake, slide the finger
away from it to cancel the selection.
Touch the “CLR” key or press & (q) to return to the previous
screen.
dv62_E.book
41 ページ
２００８年１１月３日
月曜日
午後８時１８分
Control key/Touch operation list
■ While Full Browser is displayed
Touch operation
Keep key touched
To display a zoom bar*1
Slide the finger up/down/left/right To scroll a screen
Quickly slide the finger left/right
To display next/previous page*2
*1 Zoom bar can also be displayed from the Submenu. Slide the
slider of zoom bar left/right or touch ＋/－ on the both ends of the
zoom bar to zoom up/down the screen.
*2 Not available when there is no history.
Touch the tab on the upper part of the screen to switch windows.
Touch a link to highlight and touch it again to view the linked site.
Quickly slide the finger left/right or touch $/# to move the cursor
to next/previous history in the Visual history screen.
• Quickly slide the finger up/down or touch %/& to switch
windows.
Control key
To fast forward*1, 2
To pause/play*1
To fast reverse*1, 2
To turn up the volume*3
To turn down the volume*3
To switch to the Full-screen
mode
To stop
Before Using the Handset
Control key
Control keys are not shown. Operate from the Submenu.
■ While a PC movie is played back
*1 May not appear for the PC movies which have restrictions on the
operations such as the live distribution.
*2 Keep key touched to fast forward/fast reverse.
*3 Keep key touched to adjust the volume continuously.
Settings can be changed from the Submenu.
Touch operation
Quickly slide the finger up/down
To adjust volume
■ While 1Seg is being watched
Control key
To select a station with
UP*1
To record 1Seg programs
as a still picture*2
To select a station with
DOWN*1
To turn up the volume*3
To turn down the volume*3
*1 Keep key touched to select a station by searching a frequency. Touch
[ to cancel the selection for station by searching a frequency.
*2 Keep key touched to record video. Touch f to end recording.
*3 Keep key touched to adjust the volume continuously.
Settings can be changed from the Submenu.
Touch operation
Quickly slide the finger up/down
To adjust volume
Quickly slide the finger left/right
To select a station with UP/DOWN
41
e02_dv62_7e.fm
[41/56]
dv62_E.book
42 ページ
２００８年１１月３日
月曜日
午後８時１８分
■ While camera is activated
■ While a message details screen is displayed
Control key
Control key
Before Using the Handset
*1
*2
*3
*4
To shoot with the normal shutter*1
To switch to the Egao focus shutter mode*1, 2
To next mail/message
To previous mail/message
Settings can be changed from the Submenu.
To switch to the Furimuki shutter mode*1, 2
Touch operation
To start shooting*3
Slide the finger up/down
To scroll a screen up/down*
To end shooting*4
Slide the finger left/right
To next/previous mail or message
Appears in the still picture shooting screen.
Touch P to return to the Normal shooting mode.
Appears in the movie shooting screen.
Appears while shooting a movie.
Settings can be changed from the Submenu.
In the preview screen after shooting still picture, the following keys
appear.
To save
To clear
To save all*
To delete all*
* Appears after shooting still pictures continuously.
Submenu appears after shooting movie.
Touch operation
Slide the finger up/down
To adjust the brightness
Slide the finger left/right
To adjust the zoom*
* The range of zoom is changed depending on how far the finger is
slid left/right. When zooming up in a moment, double-touch the right
edge of the screen.
Focus and shoot as follows when the AF mode is set other than
[Center AF], [Standard] or [Closeup].
• Select [Def (people first)]: Touch the face detection frame to focus.
• Select [Spot AF]: Touch a point to focus/touch the focus area.
• Select [Manual focus]: Slide the finger left/right to focus/touch G.
42
e02_dv62_7e.fm
[42/56]
* Alternatively, touch A/B to scroll a screen up/down.
When touching during Decome-Anime playback screen display, a
message details screen is displayed.
Touch the highlighted data (nP. 187) or attached file to select it.
Switch the display method for message details screen (nP. 44).
■ While an image is displayed from My picture/1Seg
of Data box
Control key
To pause/play*
To next
To previous
* Appears for Flash movies.
Settings can be changed from the Submenu.
Touch operation
Slide the finger left/right
To next/previous
Putting the distance between two To zoom up/down
fingers apart/closer
If the zoomed up image is displayed, slide the finger up/down/left/
right to change the display position.
dv62_E.book
43 ページ
２００８年１１月３日
月曜日
午後８時１８分
■ While i-motion is displayed from i-motion of Data box
Control key
To previous*1
To pause/play
To next*1
To turn up the volume*2
To turn down the volume*2
To stop
To switch to the Full-screen
mode
To compose a message
attached*3
*1 Keep key touched to perform Fast reverse/Fast forward.
*2 Keep key touched to adjust the volume continuously.
*3 Appears when attaching is available.
Settings can be changed from the Submenu.
Touch operation
Quickly slide the finger up/down
To adjust volume
Quickly slide the finger left/right
To next/previous
■ While a video is played back from 1Seg of Data box
Control key
To fast reverse*1
To pause
To fast forward*1
To turn up the volume*2
To turn down the volume*2
To stop
To return to a location of
approx. 10 seconds before
To skip to a location of
approx. 30 seconds after
*1 Keep key touched to increase the speed to 6/2. Touch q
to play back a video while performing Fast reverse/Fast forward.
*2 Keep key touched to adjust the volume continuously.
While stopped/paused, the following control keys appear.
To play
To turn up the
volume*
To turn down the volume*
Touch operation
Quickly slide the finger up/down
To adjust volume
Quickly slide the finger left/right
Fast reverse/Fast forward*
Before Using the Handset
* Keep key touched to adjust the volume continuously.
Settings can be changed from the Submenu.
* Operation is not available while stopped/paused. Operate during
Fast reverse/Fast forward to increase the speed.
■ While e-book, etc. is displayed
Control key
To top
Line-by-line/
Frame-by-frame forward
Line-by-line/
Frame-by-frame reverse
Settings can be changed from the Submenu.
Touch operation
Quickly slide the finger up/down/
left/right
To move between lines/frames
Touch a link to highlight and touch it again to view the linked site.
■ While Word or Excel files are displayed
Control key
To next page
To previous page
Settings can be changed from the Submenu.
Touch operation
Slide the finger up/down/left/right To scroll a screen
Quickly slide the finger left/right
To next/previous page
Double-touch
To fit to screen
Putting the distance between two To zoom up/down
fingers apart/closer
43
e02_dv62_7e.fm
[43/56]
dv62_E.book
44 ページ
２００８年１１月３日
月曜日
午後８時１８分
■ While music data is played
Support Book
Control key
Before Using the Handset
To previous song/To return
to beginning of song*1
To pause/play
*1
*2
*3
*4
To next*1
To turn up the volume*2
To turn down the volume*2
To stop
To view the list screen of
music data for playback
To display the folder list
screen
To save images/lyrics*3
To view next images/
lyrics*3, 4
Keep key touched to perform Fast reverse/Fast forward.
Keep key touched to adjust the volume continuously.
Appears while viewing images/lyrics.
Appears when multiple images/lyrics are saved.
Settings can be changed from the Submenu.
Touch operation
Quickly slide the finger up/down
To adjust volume
Quickly slide the finger left/right
To next/previous
Other operations
■ Entering terminal security code
If the security code entry screen appears, enter the terminal security
code by touching the displayed numbers.
■ Switching display method for message details
screen 
In the message details screen, touch [Hori screen mode] to display the
message details screen in the left side of the screen. Re-touch to
display in full-screen.
Selecting is not possible in the normal position. The setting is valid
only in the viewer position.
44
e02_dv62_7e.fm
[44/56]
Displaying Support Book
Use this function for unsure operations.
After the Support Book appears, check the
explanation and operation procedures of
each function. In addition, directly start
functions that were looked up in the
Support Book.
In stand-by, press $/[Support Book].
Select a menu or item/t.
: To start functions directly: Select the function to start/t/
[Yes].
FOMA card
Using FOMA card
A FOMA card is an IC card that records personal information,
such as phone numbers. A FOMA card can store phonebook
data and SMS. By switching FOMA cards, multiple FOMA
terminals can be used for different purposes as needed.
If a FOMA card is not inserted, transmission functions such as
voice/Videophone/PushTalk calls, i-mode, mail transmission and
packet transmission are not available on the FOMA terminal.
Inserting/Removing FOMA card
Before inserting or removing the FOMA card, turn off the power,
position the back facing upwards and remove the battery pack.
Close and hold the FOMA terminal firmly with your both hands.
dv62_E.book
45 ページ
２００８年１１月３日
月曜日
午後８時１８分
■ Inserting FOMA card
1 Hook a finger on the tab and pull the tray out (1).
: Pull out the tray straight until it stops.
Notch
IC (gold)
3 Push the tray all the way in (3).
Fit the notch of the FOMA card
to that of the tray.
1 Tab
Tray
■ Removing FOMA card
1 Hook a finger on the tab, pull the tray out (1) and
remove the FOMA card (2).
: Do not allow the FOMA card to fall when removing it.
Inserting or removing the FOMA card forcibly may damage the
card or deform the tray. Use caution.
Refer to the FOMA card user’s guide for more information on the
FOMA card.
Do not misplace the FOMA card once it is taken out.
When the tray falls off, slide the tray in straight along the guide rail.
FOMA card security functions

The FOMA terminal has built-in FOMA card security functions (FOMA
card restriction functions) as functions for protecting personal data and
files.
When data or files are retrieved using any of the following methods
or i-appli is running with the FOMA card inserted into the FOMA
terminal, FOMA card security functions are automatically set in the
retrieved data or files.
 When a file such as an image, melody or PDF is downloaded
from a site or Internet web page
 When a site or Internet web page is saved as a screen memo
 When i-mode mail with a file attached is received
 When i-appli is running
Data, files or software with FOMA card security functions run only
when in use with the FOMA card inserted at time of acquisition.
Display, play, attach to i-mode mail, run software, send data using Ir
communication function and iC communication function, and copy
to microSD Card can be executed. These operations cannot be
performed if a different FOMA card is inserted.
The following indicates the data for which FOMA card security is
set.
 Melody
 Image (including animation and Flash movie)
 Screen memo  Chaku-utaÂŽ/Chaku-uta fullÂŽ
 Chara-den
 File attached to Message R/F
 i-motion
 ToruCa (details) image
 PDF data
 Image inserted to Deco-mail or signature
 Kisekae Tool
 Videophone picture memo
Continued on next page
e02_dv62_7e.fm
[45/56]
Before Using the Handset
Hold the FOMA card with the IC
facing up and set on the tray (2).
Security codes
The FOMA card has a “PIN1 code” and a “PIN2 code”.
Both are set to [0000] by default but can be changed to a four- to
eight-digit number by the user (nP. 125).
45
dv62_E.book
46 ページ
２００８年１１月３日
月曜日
午後８時１８分
Before Using the Handset
 Machi-chara
 i-appli (including i-appli stand-by)
 Download dictionary
 Download font
 Contents transfer compatible data
 Image in Message R/F
 Music&Video Channel program
 Deco-mail template with data which FOMA card security
functions are set
 Decome-Anime Template
 e-book/e-dictionary/e-comic saved in the [Comic] folder
 File attached to i-mode mail other than the following
• ToruCa
ポPhonebook
ポSchedule
• Bookmark
ポDocuments
※ “Chaku-uta” is a registered trademark of the Sony Music
Entertainment (Japan) Inc.
The following indicates the settings saved in the FOMA card.
 Own number
 PIN setting
 Select language
 SSL certificates
 SMS center
 SMS expiry
 SMS input character
The following explanation refers to the FOMA card inserted at time
of data/files retrieval as “one’s own FOMA card” and other FOMA
cards as “another’s FOMA card”.
One’s own
FOMA card
One’s own FOMA
card security
functions are set for
downloaded data,
files attached to
received mail and
i-appli that have been
run, allowing viewing
and playback of data.
Another’s
FOMA card
Different FOMA card
inserted
When another’s
FOMA card is
inserted, data with
one’s own FOMA
card security
functions set cannot
be viewed or played
back.
When one’s own FOMA card is replaced with another’s FOMA
card, the data or files for which FOMA card security functions are
set cannot be set as stand-by displays or ring tones.
When a FOMA card is replaced with another’s FOMA card, FOMA
card security functions are activated and if data or file retrieved
from a site is set as the stand-by display or ring tone, the setting is
reset to the default. When one’s own FOMA card is re-inserted,
the setting returns.
Example: When setting [Melody A], for which FOMA card
security functions are set, as a ring tone
When one’s own FOMA card is taken out or is replaced with
another’s FOMA card, ring tone returns to default setting. When
one’s own FOMA card is put back, the ring tone returns to [Melody
A].
FOMA card security functions cannot be set for data received
using Ir communication or data transmission functions, and still
pictures/movies, etc. shot with the FOMA terminal.
46
e02_dv62_7e.fm
[46/56]
dv62_E.book
47 ページ
２００８年１１月３日
月曜日
午後８時１８分
FOMA card type
Note the following differences between “FOMA card (blue)” and
“FOMA card (green/white)” used on the FOMA terminal.
Function
FOMA card
(blue)
FOMA card
Page
(green/white)
Number of phone number
digits available in the FOMA
card phonebook
Up to 20 digits Up to 26 digits P. 94
Client certificate operations
for FirstPass
Not available
Available
P. 190
Use of WORLD WING
Not available
Available
P. 438
Service Numbers
Not available
Available
P. 429
About WORLD WING
WORLD WING is a DOCOMO’s FOMA international roaming
service that makes it possible to use the mobile phone number
registered in Japan to make and receive calls even overseas by the
FOMA card (green/white) and supported FOMA terminal.
If subscribed to the FOMA service after September 1, 2005,
subscription for “WORLD WING” is not required. However, if
subscription for “WORLD WING” is canceled at or after
subscription for the FOMA service, subscription for “WORLD
WING” is required again.
If subscribed to the FOMA service before August 31, 2005 but not
subscribed to “WORLD WING”, subscription for “WORLD WING”
is required.
Some payment plans are not available.
When the FOMA card (green/white) is lost or stolen overseas,
promptly contact DOCOMO and conduct a procedure for
canceling the use of service. Refer to General Inquiries on the
back of this manual for inquiries. Note that transmission/calling
charges after the FOMA card is lost or stolen are incurred to the
subscriber.
Before Using the Handset
It is possible to move or delete data or files for which FOMA card
security functions are set even when another’s FOMA card is
inserted.
Running i-appli by selecting highlighted text in i-mode mail details
screen cannot be performed or retrieved when FOMA card
security functions are set.
If the FOMA card is replaced with another’s FOMA card after
i-appli stand-by is set, the set i-appli cannot be activated in
stand-by, and the image set in Stand-by display appears.
Attaching/Removing battery pack
Use the battery pack SH20 exclusive to the FOMA terminal.
Turn off the power, close the FOMA terminal, and hold it in your
both hands before attaching or removing the battery pack.
■ Attaching battery pack
1 Lightly push the back cover in the direction of the
arrow (1), slide approximately 3 mm (2) and
remove the back cover (3).
Continued on next page
e02_dv62_7e.fm
[47/56]
47
dv62_E.book
48 ページ
２００８年１１月３日
月曜日
午後８時１８分
■ Removing battery pack
1 Follow step 1 of “Attaching battery pack” to
remove the back cover.
Before Using the Handset
Attach the battery pack (4).
: The battery pack has tabs that make it easy to attach. Attach the
battery pack with a recycle mark side faced up.
Remove the battery pack.
: The battery pack has a “PULL” Tag that makes it easy to
remove. Hold the “PULL” Tag between the fingers and lift up it in
the direction of an arrow (45-degree from the FOMA terminal) to
remove the battery pack.
Tabs
Battery pack
Tabs
Face the side with
a recycle mark up
Battery pack connector terminal side
3 Attach the back cover (5).
: Attach the back cover as shown in the illustration and then push
the back cover and slide into place.
48
e02_dv62_7e.fm
[48/56]
“PULL” Tag
Using unnecessary force when attaching or removing the battery
pack may damage the connector terminal for the battery pack
(charger terminal) on the FOMA terminal.
Firmly close the back cover. If not closed firmly, the back cover
may come off and the battery pack may fall out due to vibration.
Charging
The battery pack is not fully charged at the time of purchase.
Be sure to charge the battery using the exclusive AC or DC
adapter (sold separately) before use.
dv62_E.book
49 ページ
２００８年１１月３日
月曜日
午後８時１８分
■ Cautions while charging
■ Estimated charge times and LED display
The following figures are estimated times for charging an empty
battery pack with the FOMA terminal turned off.
FOMA AC Adapter 01/02
Approx. $$ min
FOMA DC Adapter 01/02
Approx. $$ min
Charging LED illuminates in red while charging, and it turns off
when charging is completed.
Check that the battery pack has been properly attached when
charging LED flashes red. The LED also flashes red when the
battery pack has reached the end of its service life.
The battery pack can also be charged with the FOMA terminal
turned on ({ on the display flashes during charging).
When charging is completed, charging LED turns off, and { on
the display changes to ".
When the battery becomes warm, charging may automatically stop
even if the battery has not been fully charged. Charging resumes
after the temperature lowers to an appropriate temperature. While
charging is stopped, charging LED turns off ({ on the display
flashes while stopped).
■ Estimated times of use when fully charged
Continuous FOMA/3G
talk time
GSM
Voice call: Approx. $$ min
Videophone call: Approx. $$ min
Voice call: Approx. $$ min
Continuous FOMA/ 3G/GSM
When mobile: Approx. $$ hr
stand-by
3G
setting: 3G
time
3G/GSM
When mobile: Approx. $$ hr
setting: AUTO At rest: Approx. $$ hr
GSM
1Seg watching time
3G/GSM
At rest: Approx. $$ hr
setting: AUTO
Approx. $$ min
Continuous talk time is estimated as the usage time at normal transmission
signal strength, and continuous stand-by time is estimated as the usage
time while moving with the FOMA terminal folded at normal signal strength.
Using i-mode reduces talk (transmission)/stand-by time. When i-Channel is
subscribed, information is automatically received and updated, so talk
(transmission)/stand-by time will be reduced. In addition, when shooting or
editing an image, watching 1Seg, composing i-mode mail, activating the
downloaded i-appli or the i-appli stand-by, or using MUSIC Player, i-motion
player, Bluetooth function or data communication, the talk (transmission)/
stand-by time will be reduced even if calls or i-mode transmission are not
made. Some i-appli software may continue transmission even after
downloading. To avoid this, set not to connect in advance.
Continued on next page
e02_dv62_7e.fm
[49/56]
Before Using the Handset
Do not charge for long periods of time with the power left on. If the
FOMA terminal is left on after charging is complete, the battery
pack charge decreases.
In such cases, the AC or DC adapter charges the battery again.
However, depending on when the FOMA terminal is disconnected
from the AC or DC adapter, the battery charge level may be low, the
battery alert tone may sound, or the battery may only be usable for
a short time.
When the battery is empty and terminal is recharging, charging LED
may not illuminate immediately.
If the battery empty alert is displayed, the alert tone sounds and the
power cannot be turned on, charge the battery for a while.
If the battery empty alert is displayed and charging begins within 60
seconds of the alert tone, the status returns to normal.
While charging, terminal may not turn on even when charging LED
is illuminated in red. Charge longer and try turning power on again.
Frequently recharging the battery when its power is still remaining
enough may shorten the life of the battery pack. It is recommended
to use the battery to a certain level before recharging.
The battery pack cannot be charged by itself.
49
dv62_E.book
50 ページ
２００８年１１月３日
月曜日
午後８時１８分
Before Using the Handset
The actual usage time is a combination of stand-by time and talk
time, and the longer the talk time, the shorter the stand-by time
becomes.
1Seg watching time is estimated as the watching time at normal
transmission signal strength with a flat-plug stereo earphone set
P01 (sold separately) used.
Talk (transmission)/stand-by time may be reduced by about half or
1Seg watching time may be shortened depending on battery pack
status, function used, temperature and other environmental
conditions, or signal strength (no signal or weak signal).
■ Battery pack service life
Battery pack is a consumable product. Service time per charge is
gradually reduced every time the battery is charged.
When service time per charge is reduced to about half of the default
time, this means that the battery pack is approaching the end of its
service life. In such a case, it is recommended to replace the battery
pack as soon as possible. Depending on usage, the battery pack
may swell as it approaches the end of its service life but this will not
cause problems.
If i-appli, Videophone, or 1Seg is used while charging for a long
time, the service life of the battery pack may become shorter than
estimated.
To protect the environment, return used batteries to
NTT DOCOMO, any DOCOMO retailer, or a recycling
agency.
■ About charging batteries
Refer to user’s guide of FOMA AC Adapter 01/02 (sold separately),
FOMA AC Adapter 01 for Global use (sold separately), or FOMA
DC Adapter 01/02 (sold separately).
FOMA AC Adapter 01 covers only 100V AC. FOMA AC Adapter 02/
FOMA AC Adapter 01 for Global use covers from 100 to 240V AC.
50
e02_dv62_7e.fm
[50/56]
The shape of the plug for the AC adapter is for 100V AC (for
domestic use). To use the AC adapter of 100 to 240V AC overseas,
a conversion plug adapter that is compatible with the voltage of
your country of stay is required. Do not use a transformer for use
overseas to charge the battery.
Charging by using AC adapter/DC adapter
[Read “FOMA AC adapter 01/02 (sold separately) and
FOMA DC adapter 01/02 (sold separately) user’s guide”
carefully.]
Battery pack can be charged even with the FOMA terminal opened
or in the viewer position.
Open the external connector terminal cover (1)
and insert the AC or DC adapter connector
horizontally into the external connector terminal
(2).
External
connector terminal
Release buttons
Charging LED
1 External connector terminal cover
Connector (Face the side with the arrows up)
: Check the direction (See diagram)
of the connector, keep it parallel
with the FOMA terminal and firmly
push all the way in until it clicks.
dv62_E.book
51 ページ
２００８年１１月３日
月曜日
午後８時１８分
When inserting the AC adapter power plug into an
outlet or inserting the DC adapter power plug into
a car cigarette lighter socket, Charge start sound is
heard, charging LED illuminates, and charging
starts.
When using a DC adapter
The DC adapter should only be used in negative grounded
vehicles (12 and 24V DC).
Do not use with the car engine shut off. May drain the car battery.
The DC adapter fuse (2A) is a consumable. For replacement,
purchase a new fuse at a local automobile supply shop.
Refer to the FOMA DC Adapter 01/02 user’s guide for details.
Cigarette
lighter socket
For AC adapter
Charging by using desktop holder
For DC adapter
3 When Charge end sound is heard and charging
LED turns off, charging is complete.
: When removing the connector, always hold the release buttons
on both sides (1) and unplug it by pulling out horizontally (2).
[Read “Desktop holder SH22 (sold separately) user’s
guide” carefully.]
Battery pack can be charged with the FOMA terminal opened or in
the viewer position.
Face the side with the arrows of the AC adapter
connector up and insert it into the connector
terminal of the desktop holder (1).
: Keeping the connector parallel with the desktop holder, firmly
push it all the way in until it clicks.
Do not forcibly insert or remove. May cause damage to the
external connector terminal and the connector.
2 Insert the AC adapter power plug into an outlet (2).
3 When placing the FOMA terminal in the desktop
holder, Charge start sound is heard, Charging LED
illuminates, and charging starts.
: Place the FOMA terminal as the figure shows (3), and push it
in the direction of the arrow (4) until it clicks.
Continued on next page
e02_dv62_7e.fm
[51/56]
Before Using the Handset
100V AC
outlet
Pull the adapter out of the outlet or cigarette lighter socket if it will
not be used for a long time.
Do not forcefully pull the external connector terminal cover. May
damage the cover.
Do not place objects near the FOMA terminal when charging. May
damage the FOMA terminal. In addition, a display may be
damaged when charged in the viewer position.
51
dv62_E.book
52 ページ
２００８年１１月３日
月曜日
午後８時１８分
Charging LED
Battery level
Before Using the Handset
Checking battery level
Connector
(Face the side with
the arrows up)
Battery level is still sufficient.
Battery is almost empty. Charge the
battery.
Battery is empty (Power will turn off
soon).
Battery pack is being charged.
Battery level is low.
Checking battery level with sound and display
100V AC
outlet
FOMA AC
Adapter 01/02
When Charge end sound is heard and charging
LED turns off, charging is complete.
: Hold the desktop holder and lift the FOMA terminal out.
Pull the AC adapter out of the outlet when left unused for a long
period of time.
When Charge start sound is not heard or when charging LED does
not illuminate, check that the FOMA terminal is placed securely in
the desktop holder (except when terminal is turned off, Manner
mode is set or Charge start sound is Silent).
When placing the FOMA terminal in the desktop holder, be careful
that the strap is not caught in between the handset and the
desktop holder.
When the FOMA terminal placed in the desktop holder is set to the
viewer position, operate while holding it so as not to come off from
the desktop holder.
52
e02_dv62_7e.fm
[52/56]
In the Custom menu, select [Settings]/[General
settings]/[Check status]/[Battery level].
Graphic
Sound
Status
Three beeps
Battery is
sufficiently full.
Two beeps
Battery is
running low.
One beep
Battery is
almost empty.
Charge the
battery.
: Wait approximately 2 seconds and the display disappears.
: The battery level sound is heard at the volume set in Key/Touch
sound (nP. 104).
dv62_E.book
53 ページ
２００８年１１月３日
月曜日
午後８時１８分
: If initial settings have been completed, the
screen shown on the right appears when
power is turned on. This screen is called the
“stand-by display”.
If battery runs out
Welcome mail
: “Welcome$デコメアニメ%&”
(Welcome$Decome-Anime%&) and “緊
急速報「エリアメール」のご案内”
(Information of Early Warning “Area Mail”)
are saved by default.
: To check a welcome mail: In stand-by,
Stand-by display
press t/select the stock icon C (mail
message)/t.
• For details on the following operations nP. 154
If initial settings are not yet completed, the setting screen appears
every time the power is turned on.
If the FOMA card is not inserted, [Insert UIM] and a FOMA card
error appear (nP. 31).
When [Enter PIN1 code] appears, enter the PIN1 code (nP. 125).
When a FOMA card is replaced with a new card, the terminal
security code (four to eight digits) must be entered after turning on
the terminal. If a correct terminal security code is entered,
stand-by display appears. When a wrong terminal security code is
entered five times, the power is turned off. However, turning on the
power again is possible.
When A appears, the handset is outside the service area or in a
place with no signal. Move to a place where the icon disappears.
Power ON/OFF
Turning power ON/OFF
Turning power ON
Press H (for 2+ seconds).
: It may take some time for the wakeup screen to appear.
: The wakeup screen appears followed by the initial settings
screen. Proceed to Initial setting (nP. 54).
Before Using the Handset
[Battery empty. Unsaved data will be lost. Ending
current operation] appears if battery starts to run out
(Press t to clear the message). After a while, an
alert tone sounds. The warning screen stating that the
battery runs out appears, handset operations are disabled and power
turns off after approximately 60 seconds.
During a voice/Videophone call, the alert tone sounds and [Battery
empty. Unsaved data will be lost. Ending current operation]
appears. The call is disconnected after approximately 20 seconds.
At the same time, the screen above appears and after
approximately 60 seconds, the power turns off.
Alert tone does not sound when Manner mode or Public mode
(Drive mode) is set (Alert tone sounds during a call).
Turning power OFF
Press H (for 2+ seconds).
: It may take some time for the power to be turned off (The end
screen appears on the display until the power is turned off).
53
e02_dv62_7e.fm
[53/56]
dv62_E.book
54 ページ
２００８年１１月３日
月曜日
午後８時１８分
Select language
Changing screen display to English
Before Using the Handset
5 Set the font size (nP. 119).
: When the initial settings are complete, the software update
function confirmation screen appears. Read the description and
select [Agree] (When the initial settings are made from the
menu or the software update is set to other than [auto-update],
the confirmation screen does not appear).
In the Custom menu, select [設定]/[一般設定]/
[Bilingual]/[English].
: To switch the display language from English to Japanese: In the
Custom menu, select [Settings]/[General settings]/[Select
language]/[日本語].
If a FOMA card is inserted, settings are saved to the FOMA card
as well. When the setting of the FOMA terminal handset and the
setting of the inserted FOMA card are different, the setting in the
FOMA card is prioritized.
Initial setting
Press H to cancel the initial settings.
Date settings
Setting date and time
Set the date and time on the FOMA terminal.
In the Custom menu, select
[Settings]/[General settings]/
[Date settings].
Select the [Auto time correction] field/t/select
the setting.
Making initial setting
The initial settings screen appears automatically when the
power is turned on for the first time. Each setting item can
also be set from Menu (When the initial settings are
complete, the stand-by display appears).
 Date and time settings
 Change terminal security code
 Key/Touch sound
 Location request menu
 Font size settings
When items that have not been set remain, the setting screen
appears every time the power is turned on.
1 Set the date and time (nP. 54).
2 Register a terminal security code (nP. 123).
3 Set the Key/Touch sound (nP. 104).
4 Set GPS Location provision ON/OFF (nP. 318).
54
e02_dv62_7e.fm
[54/56]
; Select [ON]/i.
; Select [OFF]/select the [Date] field/t/enter the date/
t/select the [Time] field/t/enter the time (24-hour
format)/t/i.
• When entering month, day and time, add 0 before numbers
one through nine (example: 01, 02, 03, etc.).
• Set the date and time from 00:00 January 1, 2001 to 23:59
December 31, 2050.
When Limit settings is set to [Enable], the terminal security code
must be entered in the Date settings.
dv62_E.book
55 ページ
２００８年１１月３日
月曜日
午後８時１８分
When Auto time correction is set to [ON]
When the power is turned on, the FOMA terminal adjusts the time
by connecting to the network’s time information.
If the FOMA terminal does not adjust the time even when the
power is turned on, turn off the power and restart.
Time may not be adjusted depending on the signal status.
Time may be off by a few seconds.
When time difference is adjusted overseas, the local time and date
and ! appear in Redial, Received calls, Received/Sent messages
history (SMS only), and Received/Sent messages list. The
received/sent messages are not displayed in order of the
displayed time and date but the mail reception/send.
! does not appear in the Unsent messages for mail messages. If
the date order display is set for the Unsent messages, unsent
messages are displayed in the order of the displayed time and
date.
Time correction may not be performed depending on the overseas
network.
During overseas use, Japan time and local time (or time set in
City) appear in the dual display except for the following cases.
 When Auto time correction is set to [ON] and time correction
information is not being received from an overseas network
 When Auto time correction is set to [OFF] and City is set to the
city in the same time zone as Japan
■ Changing time zone manually 
1 In the Date settings screen, select the [Auto time
correction] field/t/[OFF]/C.
2 Select a time zone/t.
3 Select a city/t/i.
Notify caller ID
Before Using the Handset
The date and time that are set are saved even if the battery pack is
removed, but if the battery pack remains removed for
approximately 30 seconds or more, the settings are reset. Also, if
the battery remains empty, the settings may be reset. When this
happens, set again after charging the battery.
If the date and time are not set correctly, the following functions
cannot be used properly.
 Redial, Received calls
 Auto power ON/OFF
 Alarm
 Schedule
 SSL (authentication)
 i-appli Auto start
 Starting i-appliDX
 Reception, Recording
 Machi-chara
 Software update
 Pattern definitions update
 Record message (voice), Record message (Videophone calls)
 Camera image titles/shooting date
 Playback of i-motion or music data with expiration date/period
for replay.
 View of e-books/e-dictionaries/e-comics with expiration date/
period for browse.
Notifying the other party of your
phone number
Display your number (caller ID) on the other party’s phone
(display) when making a voice/Videophone/PushTalk call.
Handset number (caller ID) is important personal information. Be
very careful about your caller ID setting.
The Notify caller ID function is available only on compatible phone
devices.
55
e02_dv62_7e.fm
[55/56]
dv62_E.book
56 ページ
２００８年１１月３日
月曜日
午後８時１８分
Setting Notify caller ID/No caller ID in advance
Before Using the Handset
In the Custom menu, select [Settings]/[NW
Services]/[Notify caller ID].
Select [Activate/Deactivate].
Select the setting.
: To check the setting: Select [Check setting].
: To notify caller ID: Select [Yes].
: To not notify caller ID: Select [No].
Notify caller ID setting cannot be set from outside the service area.
Own number
Checking your own phone number
When checking your own phone number during a call nP. 59
In the Custom menu, press 0.
: Alternatively, select [Phone]/[Owner Information].
: To switch between Number A and Number B (when 2in1 [Dual
mode] is used): Press i.
When changing the Number B of 2in1, use any of the following
methods to obtain the correct Number B.
 Set 2in1 function OFF and then perform 2in1 setting again to
set 2in1 function ON
 Check the 2in1 subscription
When a FOMA card exchange (2in1 subscriber b 2in1
nonsubscriber) is performed, set 2in1 function OFF.
When a FOMA card exchange (2in1 subscriber b 2in1
subscriber) is performed, check the 2in1 subscription.
For details on Owner information nP. 395
56
e02_dv62_7e.fm
[56/56]
dv62_E.book
438 ページ
２００８年１１月３日
月曜日
午後８時１８分
Country codes of major countries
Outline of international roaming
(WORLD WING)
International roaming (WORLD WING) is a service that
enables you, using overseas telecommunications carrier’s
networks, to make calls and use i-mode.
Use this FOMA terminal for voice/Videophone calls, i-mode
and SMS with the phone number and mail address used in
Japan. Network services such as Voice Mail and Call
Forwarding Services can also be used.
This service is available in the 3G network and GSM/GPRS network
service areas. Refer to the DOCOMO “International Services
website” for details on the area.
By default, the FOMA terminal is set to automatically switch
networks (nP. 444).
The following shows “Country code” used when making international
calls (nP. 65) or setting International dial assist (nP. 66).
For other country codes and details, refer to the DOCOMO
“International Services website”.
Country/Region
Australia
Code
61
Code
960
Austria
43
Netherlands
31
Belgium
32
New Caledonia
687
64
Brazil
55
New Zealand
Canada
Norway
47
China
86
Peru
51
Czech
420
Philippines
63
Egypt
20
Russia
Fiji
679
Singapore
65
Finland
358
South Korea
82
Overseas Use
France
33
Spain
34
Germany
49
Sweden
46
Greece
30
Switzerland
41
Hong Kong
852
689
Hungary
36
Tahiti
(French Polynesia)
India
91
Taiwan
886
Indonesia
62
Thailand
66
Italy
39
Turkey
90
Japan
81
U.K.
44
Macau
853
U.S.A.
Malaysia
60
Vietnam
84
438
e20_dv62_7e.fm
[438/446]
Country/Region
Maldives
~~~~~ ~~~~~ ~~~~~ ~~~
dv62_E.book
439 ページ
２００８年１１月３日
月曜日
午後８時１８分
Available services overseas
The available communication services overseas are as follows.
Communication
service
Voice call
Explanation
3G
GSM GPRS
Make international Videophone
calls to users of the specified
3G telecommunications
carriers overseas and FOMA
users in Japan.
i-mode mail
Send or receive i-mode mail
overseas with the same
address as used in Japan.
i-mode
Use i-mode overseas.
i-Channel
Use i-Channel overseas.
i-concier
Use i-concier overseas.
i-Widget
Use i-Widget overseas.
SMS
Send or receive SMS overseas
with the same phone number
as used in Japan.
Videophone
Data
Use packet transmission
communication overseas.
(packet
transmission)
Before use overseas
The following items must be checked before departure, at
your country of stay, and after homecoming.
Preparation before departure
Prepare below in Japan before using the FOMA terminal overseas.
■ About contract
Some communication services are not available depending on the
network/carrier. Refer to the DOCOMO “International Services
website” for details.
If subscribed to the FOMA service after September 1, 2005, a
subscription for “WORLD WING” is not required. However, if a
subscription for “WORLD WING” is canceled at or after a subscription for
the FOMA service, a subscription for “WORLD WING” is required again.
If subscribed to the FOMA service before August 31, 2005 but not
subscribed to “WORLD WING”, a subscription for “WORLD WING”
is required. Some payment plans are not available.
Continued on next page
e20_dv62_7e.fm
[439/446]
Overseas Use
Make or receive calls in your
country of stay or make
international calls to Japan or
to other countries with the
same phone number as used
in Japan while abroad.
Packet transmission charges are separately incurred for the transmission
included in monthly usage fees of i-Channel (nP. 194) overseas.
If Widget appli attempts transmission when the i-Widget screen
appears, packet transmission charges are incurred for each
transmission overseas.
Unable to use 64K data communication by connecting a PC, etc.
overseas.
日英版しゃべって翻訳 for SH (J-E Speech Translation for SH) is
available overseas (nP. 280).
GPS function is not available overseas. An error screen appears
and packet transmission charges are incurred when the site of GPS
Service settings is accessed overseas.
Overseas packet transmission charges differ from those in Japan.
When the 2in1 is used, calling from Number B is not available overseas.
When Multi Number is used, calling from Additional Number is not
available overseas.
439
dv62_E.book
440 ページ
２００８年１１月３日
月曜日
午後８時１８分
Insert the WORLD WING compatible FOMA card (other than blue)
to the FOMA terminal (nP. 44).
■ About charging batteries
Precautions for handling the AC adapter nP. 16
Methods for charging the AC adapter nP. 48
■ About browsing i-mode sites
To browse i-mode site overseas, the settings for overseas use must
be made from iMenu in advance.
i-mode site: Select [iMenu]/[English]/[Options]/[International
Settings]/[i-mode services Settings].
Refer to “Mobile Phone User’s Guide [International Services]” and
“Mobile Phone User’s Guide [i-mode] FOMA version” for details.
■ About setting network service
Overseas Use
If subscribed to network services, Voice Mail Service, Call Forwarding
Service or other services can be used overseas.
Some network services may not be set or checked depending on
overseas telecommunications carrier. In addition, some network
services are available only in Japan. Refer to “Mobile Phone User’s
Guide [International Services]” and “Mobile Phone User’s Guide
[Network Services]” before departure.
To use network services overseas, set Remote Control (nP. 430,
P. 446) to “Activate”.
■ About inquiries overseas
For lost, stolen, and cost settlement, or malfunction of the FOMA
terminal overseas, refer to “Loss or theft of FOMA terminal or payment
of cumulative cost overseas” or “Failures encountered overseas” on
the back of this manual. Note that any call or transmission charges
incurred after the FOMA terminal is lost or stolen are charged to the
subscriber.
Add the “International call access code (Table 1)” or “International
prefix number for the universal number (Table 2)” that is assigned to
your country of stay, to the head of your phone number for inquiries.
For the latest information of the international call access code and
the international prefix number for the universal number, refer to the
DOCOMO “International Services website”.
International call access codes of major countries
(Table 1)
The following shows the International call access codes of major countries.
Communication charges to Japan will apply.
Country/Region
Code
Australia
0011
Belgium
Brazil
Code
00
00
Netherlands
00
0021/
0014
New Zealand
00
Norway
00
Canada
011
Philippines
00
China
00
Poland
00
Czech
00
Portugal
00
Denmark
00
Russia
810
Finland
00
Singapore
001
France
00
South Korea
001
Germany
00
Spain
00
Greece
00
Sweden
00
Hong Kong
001
Switzerland
00
Hungary
00
Taiwan
002
India
00
Thailand
001
Indonesia
001
Turkey
00
Ireland
00
U.A.E.
00
Italy
00
U.K.
00
Luxemburg
00
U.S.A.
011
Macau
00
Vietnam
00
Malaysia
00
440
e20_dv62_7e.fm
[440/446]
Country/Region
Monaco
~~~~~ ~~~~~ ~~~~~ ~~~
dv62_E.book
441 ページ
２００８年１１月３日
月曜日
午後８時１８分
International prefix number for the universal number
(Table 2)
The following shows the International prefix number for the universal
number of each country.
Communication charges or other charges to your country of stay
will apply.
Communication charges to your country of stay will apply when
calling from the mobile phone.
Country/Region
Code
Country/Region
Code
Argentina
00
Luxemburg
00
Australia
0011
Malaysia
00
Austria
00
Netherlands
00
Belgium
00
New Zealand
00
Brazil
0021
Norway
00
Bulgaria
00
Peru
00
Canada
011
Philippines
00
China
00
Portugal
00
Columbia
009
Singapore
001
Denmark
00
South Africa
09
990
South Korea
001
France
00
Spain
00
Germany
00
Sweden
00
Hong Kong
001
Switzerland
00
Hungary
00
Taiwan
00
Ireland
00
Thailand
001
Israel
014
U.K.
00
Italy
00
U.S.A.
011
Some codes may not be used.
Note that the universal number may not be used for calls from a
mobile phone, payphone or hotel.
The universal number can be used only for countries listed above.
Using at your country of stay
The service is available in the 3G network and GSM/GPRS network
service areas.
The FOMA terminal is set to automatically search for the network
when the power is turned on, and to be connected to the available
telecommunications carrier in your country of stay.
If the connected telecommunications carrier is changed when Auto
time correction (nP. 54) is set to [ON], a screen notifying that time
difference is adjusted may appear.
When Operator name display (nP. 445) is set to [Display on], the
telecommunications carrier connected appears in stand-by.
When Clock display (nP. 109) is set to [ON(Large)], the local time
and Japan time appear (excluding regions keeping the same
standard time as Japan time). The local time appears on the sub
display.
Talk time or stand-by time may be reduced to half the normal time
depending on the network condition of your country of stay.
Setting after homecoming
By default, the FOMA terminal is set to automatically search for the
network and to be connected to the FOMA network when the power is
turned on after homecoming.
Reset the Network search mode to the FOMA network (DOCOMO).
If the Network search mode is set to [Manual], switch to the FOMA
network (DOCOMO) manually or change to [Auto].
Set the 3G/GSM setting to [AUTO] or [3G].
Overseas Use
Finland
Calling from a hotel may cost you extra call charges requested by
the hotel (You are responsible for the call charges). Confirm with
the hotel before making calls.
441
e20_dv62_7e.fm
[441/446]
dv62_E.book
442 ページ
２００８年１１月３日
月曜日
午後８時１８分
Making a call at your country of stay
Make a call from overseas using the international roaming
service.
Making a call outside your country of stay
(including Japan)
Make a call from your country of stay to Japan or other countries.
In stand-by, enter [+] (press 0 for 1+ seconds),
country code, area code (city code) and other
party’s phone number.
: When the area code (city code) begins with 0, omit the 0 when
dialing (However, include 0 when making a call to landline
phones in some countries or regions such as Italy).
Press s (Phone)/i (V.phone).
■ Making an international call outside your country
of stay using Country code conversion
Overseas Use
Set Country code conversion (nP. 66) to [ON] and set the country
code frequently called to easily make an international call.
0 at the beginning of a phone number is automatically converted to
the country code set in Country code conversion.
Example: Make a call from phonebook
1 In stand-by, press a/select the other party.
2 Press s (Phone)/i (V.phone).
3 Select [Call].
: To dial a phone number as stored in the phonebook: Select
[Original number].
■ Making a call to the phone in country saved in Set
country code
Save a country code using Set country code (nP. 67) to select a
country code before making an international call.
The following operation is available overseas only.
In stand-by, enter a phone number/C/[Add
prefix setting]/[International Call].
2 Select the country code/t.
3 Press s (Phone)/i (V.phone).
Making a call in your country of stay
Make a domestic call at your country of stay in the same way as you
do in Japan.
In stand-by, enter a phone number.
Press s (Phone)/i (V.phone).
: Always dial the area code (city code), even when the number is
in the same area.
: When making a domestic call at your country of stay using the
phonebook, select [Original number] in step 3 of “Making an
international call outside your country of stay using Country
code conversion” on P. 442.
Refer to the DOCOMO “International Services website” for details
on available countries, country codes and telecommunications
carriers.
Even when Notify caller ID of the network service (nP. 55) is set
to “Send ID”, [Unavailable] or [User unset] appears depending on
the telecommunications carrier, and the caller ID may not be
displayed correctly.
442
e20_dv62_7e.fm
[442/446]
~~~~~ ~~~~~ ~~~~~ ~~~
dv62_E.book
443 ページ
２００８年１１月３日
月曜日
午後８時１８分
Making a call to a WORLD WING subscriber
overseas
When making a call to a “WORLD WING” subscriber overseas, make
an international call to Japan regardless of your country of stay.
In stand-by, enter [+] (press 0 for 1+ seconds),
country code 81 (Japan), the other party’s mobile
phone number excluding 0.
Press s (Phone)/i (V.phone).
Receiving a call overseas
Receive a call overseas in the same way as you do in Japan.
Press s to receive an incoming call.
: Speak to the caller.
To receive an international call from Japan, have your phone number
dialed just as a domestic call in Japan.
090 (or 080)-XXXX-XXXX
Calling from Received calls may not be available since the phone
number may not be displayed correctly.
■ Having calls made to your FOMA terminal from
countries other than Japan
Have the international call access code and 81 (Japan) added to the
beginning of your phone number, and 0 excluded as an international
call to Japan regardless of your country of stay.
International call access code of the country of the caller-81-90
(or 80)-XXXX-XXXX
3G/GSM setting
Setting network communication
system
Set the communication system supporting your area and
telecommunications carrier.
In the Custom menu, select [Settings]/[Phone
settings]/[Other settings]/[International
Roam.]/[3G/GSM setting].
Select the communication method/t.
Overseas Use
Even when a caller tried to notify of caller ID, it might not be
notified depending on the used telecommunications carrier.
When a call is received during international roaming, the call is
forwarded from Japan. Call charges to Japan are incurred by the
caller and receiving charges by the receiver.
Having calls to your FOMA terminal
■ Having calls made to your FOMA terminal from
Japan
443
e20_dv62_7e.fm
[443/446]
dv62_E.book
444 ページ
２００８年１１月３日
月曜日
午後８時１８分
Network search mode
PLMN setting
Setting a search method of
telecommunications carrier
Setting a telecommunications
carrier to preferentially connect to
Set to manually select a telecommunications carrier.
Re-search a network to set another telecommunications carrier.
Check that the Network search mode is set to [Auto] when A
appears even after homecoming.
In the Custom menu, select [Settings]/[Phone
settings]/[Other settings]/[International
Roam.]/[Network search mode].
Select the setting.
; Select [Auto]/[Yes].
• When [Auto] is set: Select [Auto].
; Select [Manual]/select a telecommunications carrier/t.
• The telecommunications carrier is changed.
; Select [Network re-search].
• The host network is changed automatically if the Network
search mode is set to [Auto]. If set to [Manual], select a
telecommunications carrier and press t.
Specify the priority order of telecommunications carriers
connected to when the Network search mode is set to [Auto].
Save up to 20.
: To check the saved telecommunications carrier’s detailed
information: Select the telecommunications carrier/t.
2 Select the number of the priority order/C.
3 Select the saving method.
Overseas Use
; Select [PLMN manual select]/enter a country code
(MCC)/t/enter a network code (MNC)/t/select a
communication method/t.
; Select [UPLMN by list]/select a telecommunications
carrier/t/select a communication method/t.
• To search a telecommunications carrier from country name:
Select [UPLMN by list]/C/select a country name/t/
select a telecommunications carrier/t/select a
communication method/t.
; Select [Set VPLMN to PLMN].
• Save the telecommunications carrier currently connected to.
; Select [Change priority]/select a destination/t.
; Select [Delete]/[Delete one].
; Select [Delete]/[Delete all]/enter the terminal security
code/t.
Checking communication services available

Check the status whether making a call, data transmission or packet
transmission is available.
In the Custom menu, select [Settings]/[Phone
settings]/[Other settings]/[In-area status]/
[Agree].
In the Custom menu, select [Settings]/[Phone
settings]/[Other settings]/[International
Roam.]/[Network search mode]/[PLMN setting].
Select [Yes].
444
e20_dv62_7e.fm
[444/446]
~~~~~ ~~~~~ ~~~~~ ~~~
dv62_E.book
445 ページ
２００８年１１月３日
月曜日
午後８時１８分
Operator name disp
Call barring
Displaying a telecommunications
carrier during roaming
Setting incoming call to reject
during roaming
Set whether to display a telecommunications carrier name
currently connected to in stand-by during international
roaming.
In the Custom menu, select [Settings]/[Phone
settings]/[Other settings]/[International
Roam.]/[Operator name disp].
Select the setting/t/[Yes].
■ When displaying a telecommunications carrier
Telecommunications
carrier name
Roaming guidance
Make this setting while still in Japan.
In the Custom menu, select [Settings]/[Other NW
Services]/[Roaming guidance].
Depending on the overseas telecommunications carrier, the setting
cannot be made.
Unable to use 64K data communication overseas.
In the Custom menu, select [Settings]/[Phone
settings]/[Other settings]/[International
Roam.]/[Call barring].
Select an item.
; Select [Activate]/[Yes]/select the barring method/t/
enter the network security code/t.
; Select [Deactivate]/[Yes]/enter the network security
code/t.
; Select [Check setting].
Overseas Use
Activating roaming guidance
When a call is received during international roaming, the
caller hears the guidance stating that international roaming
is activated.
Set the FOMA terminal to reject calls during roaming. Select
whether to bar all incoming calls or only the Videophone and
64K data communication calls.
2 Select an item/t.
3 Select [Yes].
445
e20_dv62_7e.fm
[445/446]

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.6
Linearized                      : No
Page Mode                       : UseNone
XMP Toolkit                     : 3.1-702
Modify Date                     : 2008:11:18 15:07:27+09:00
Create Date                     : 2008:11:05 16:45:40+09:00
Metadata Date                   : 2008:11:18 15:07:27+09:00
Format                          : application/pdf
Document ID                     : uuid:ea25fb23-e6a9-4058-9343-d758be872561
Instance ID                     : uuid:29f2e23f-80b4-4bdf-8282-4f7cb1e2e680
Has XFA                         : No
Page Count                      : 30

EXIF Metadata provided by EXIF.tools