Shin Chuan Computer SC600PDT-BW Portable Data Terminal User Manual SC600 revised by Joy

Download:
Mirror Download [FCC.gov]
Document ID	635834
Application ID	oXH3hVtrNEibhFZgkCy6LQ==
Document Description	Manual Pt8
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	157.84kB (1973007 bits)
Date Submitted	2006-03-13 00:00:00
Date Available	2006-03-13 00:00:00
Creation Date	2006-03-13 10:15:49
Producing Software	Acrobat PDFWriter 5.0 for Windows NT
Document Lastmod	2006-03-13 10:22:02
Document Title	SC600 User Manual-revised by Joy.doc
Document Creator	SC600 User Manual-revised by Joy - Microsoft Word
Document Author:	Brian

Select “TCP/IP Settings”. In the “General” tab, ensure “Use
Server-assigned IP address” is selected. In the “Name
Servers” tab, ensure “Use Server-assigned addresses” is
selected, and select “OK”. If you are unable to connect with
these default settings, see your ISP or network administrator
for specific TCP/IP information.
Ø
Select the “Next” button and type the telephone number.
Ø
Select the “Finish” button.
The connection you just created appears as an icon in the “Network
and Dial-up Connections” folder.
Ø
ü
Set up a point-to-Point Protocol(PPP) account with an ISP and
obtain the following information:
Ø
Access telephone number
Ø
User name
Ø Password
Once you have established an account, create a new connection on
your device. When creating this connection, you should be able to use
all of the default TCP/IP settings provided in the Make New
Connection Wizard. If you can’t connect using the default settings,
contact your ISP or access your ISP’s Web site for specific TCP/IP
information as well as primary and secondary DNS address.
ü
Modify connection setting
Ø
Select Start > Settings > Network and Dialup Connections
Ø
Select the icon for connection settings you want to modify.
Ø
Select File > Properties, or double- tap the appropriate icon.
Ø
Select desired options. There may be additional settings that
depend on the connection. To modify, select the icon and
select the icon and select Advanced Settings… from the
menu.
3-41
Figure 3-60 Network and Dial -up Connections
Figure 3-61 Network and Dial -up Connections
Figure 3-62 Network and Dial -up Connections
Figure 3-63 Network and Dial -up Connections
3-42
Figure 3-64 Network and Dial -up Connections
Figure 3-65 Network and Dial -up Connections
Figure 3-66 Network and Dial -up Connections
Figure 3-67 Network and Dial -up Connections
3-43
Figure 3-68 Network and Dial -up Connections
Figure 3-69 Network and Dial -up Connections
Figure 3-70 Network and Dial -up Connections
Figure 3-71 Network and Dial -up Connections
3.2.13 Owner
Table 3-32 Owner
ICON
ITEM & FUNCTION
“Identification” Tab : (Figure 3-74)
3-44
l
“Identification” Tab : (Figure 3-74)
ü
“Network
Fill
in or edit
ID”the
Tab:
data(Figure
as desired.
3-75)
To have
displayed
youname
startyou
youruse
device,
Enter
thethis
userinformation
name, password,
andwhen
domain
to log
select
“Display
Owner Identification” at Power On.
on
to remote
network.
To set up identification for remote networks, see Setting up
identification for remote networks.
ü
ü
Figure 3-72 Owner Properties
Figure 3-73 Owner Properties
3.2.14 Password
Table 3-33 Password
ICON
ITEM & FUNCTION
“Password Setting” Tab : (Figure 3-76)
ü
Enter the password
In the “Confirm password “box, enter the password again.
To require the password on startup, select “Enable password
protection at power- on“. and/or select “Enable password
protection for screen saver”
To exit the Password control panel, press “OK” from the
control bar, or press the  key on the keypad.
ü
ü
ü
3-45
Figure 3-74 Password Properties
3.2.15 PC Connection
Table 3-34 PC Connection
ICON
ITEM & FUNCTION
“PC Connection” Tab : (Figure 3-77)
ü
Select the first checkbox to enable direct connections to the
desktop computer. (Figure 3-77)
Tap the “Change Connection… ” button to modify the
connection method from USB or Serial. (Figure 3-78)
To exit the “Change Connection” dialog, press “OK” from the
control bar, or press the  key on the keypad.
To exit the “PC Connection” properties control panel, press
“OK” from the control bar, or press the  key on the
keypad.
ü
ü
ü
3-46
Figure 3-75 PC Connection
Figure 3-76 PC Connection
3.2.16 Power
Table 3-35 Power
ICON
ITEM & FUNCTION
“Battery” Tab : (Figure 3-79)
ü
Provide change level indicators for Main battery and Backup
battery.
Provide remaining power capacity of main battery.
If a “Main Batteries very Low” warning message shows, the
remaining battery life is around 30 minutes to SC600 shuts
down. ( Figure 3-83)
The PDT will shutdown during the main batteries capacity is
around 0%
To exit Battery control panel, press “OK” from the command
bar, or press  key on keypad.
“ Schemes” Tab: (Figure 3-80)
ü
ü
ü
ü
3-47
ü
ü
ü
The Scheme Tab allows you to determine the time to switch
state to Suspend mode when using either Battery Power or AC
Power.
Select Battery Power or AC Power as the power scheme from
the pull-down list.( Figure 3-80)
Select the time to suspend mode from the pull-down list.
( Figure 3-81)
“Device Status” Tab: ( Figure 3-82)
Provide power level of device – The power level ranges from
“ High(D0)” which means the device is at the highest power level to
“Off(D4)” which means the device is at the lowest power level.
Note:
This ICON inside the Task Bar shows that AC adapter provides power
to the PDT
The ICON inside the Task Bar shows that Main Batteries provides the
power to the PDT.
The ICON inside the Task Bar shows that AC adapter provides the
power to the PDT and is charging the main batteries..
Figure 3-77 Power
Figure 3-78 Power
3-48
Figure 3-79 Power
Figure 3-80 Power
Figure 3-81 Power
3.2.17 Regional Settings
Table 3-36 Regional Settings
ICON
ITEM & FUNCTION
“Region” Tab : (Figure 3-84)
ü
Select the desired location/language.
Review the Appearance samples in the bottom half of the
screen.
Select the Tab at the top for any settings you wish to change,
Options to modify include Number, Currency, Time, and Date.
ü
ü
3-49
Figure 3-82 Regional Settings
3.2.18 Remove Programs
Table 3-37 Remove Programs
ICON
ITEM & FUNCTION
“Remove Programs” Tab :
ü
Only user installed programs can be removed.
Select the program you wish to remove from the list and press
“remove” button.
Ø
3-50

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.6
Linearized                      : No
Encryption                      : Standard V2.3 (128-bit)
User Access                     : Print, Copy, Extract, Print high-res
XMP Toolkit                     : 3.1-702
Modify Date                     : 2006:03:13 10:22:02-08:00
Create Date                     : 2006:03:13 10:15:49-08:00
Metadata Date                   : 2006:03:13 10:22:02-08:00
Creator Tool                    : SC600 User Manual-revised by Joy - Microsoft Word
Format                          : application/pdf
Title                           : SC600 User Manual-revised by Joy.doc
Creator                         : Brian
Document ID                     : uuid:cd7095fa-bb8b-45dc-980e-247151c5aff4
Instance ID                     : uuid:e979a566-c472-4a7b-8af4-5dd6a239393b
Producer                        : Acrobat PDFWriter 5.0 for Windows NT
Page Count                      : 10
Author                          : Brian

EXIF Metadata provided by EXIF.tools