Shure orporated PA821 Antenna Combiner User Manual 27a8807

Download:
Mirror Download [FCC.gov]
Document ID	336389
Application ID	4PrIX0HAVsZLkqPXUZYlOg==
Document Description	Manual revised
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	55.86kB (698273 bits)
Date Submitted	2003-06-30 00:00:00
Date Available	2003-06-30 00:00:00
Creation Date	2003-06-26 09:56:20
Producing Software	Acrobat Distiller 5.0.5 (Windows)
Document Lastmod	2003-06-26 13:32:48
Document Title	27a8807.book
Document Creator	FrameMaker 7.0

PSMR Antenna Combiner Model PA821
User Guide
A+B OUT
A IN
MAIN OUT
INPUT SIGNAL
B IN
POWER
EXPANSION POR
PA 8 2 1
biner
PSM Antenna Com
470-870 Mhz
50 OHMS
ACTIVE COMBIN
ER
PSMR Antenna Combiner User Guide
Guide de l'utilisateur du répartiteur d'antenne PSM
Bedienungsanleitung für die Antennenweiche PSM
Guía del usuario del combinador de antenas PSM
Guida d'uso del combinatore di antenne PSM
27A8807 (CF)
©2003 Shure Incorporated
Printed in U.S.A.
ENGLISH
! IMPORTANT SAFETY INSTRUCTIONS !
1.
2.
3.
4.
5.
6.
7.
8.
9.
10.
READ these instructions.
KEEP these instructions.
HEED all warnings.
FOLLOW all instructions.
DO NOT use this apparatus near water.
CLEAN ONLY with dry cloth.
DO NOT block any ventilation openings. Install in accordance with the manufacturer's instructions.
DO NOT install near any heat sources such as radiators, heat registers, stoves,
or other apparatus (including amplifiers) that produce heat.
DO NOT defeat the safety purpose of the polarized or grounding-type plug.
A polarized plug has two blades with one wider than the other. A grounding
type plug has two blades and a third grounding prong. The wider blade or
the third prong are provided for your safety. If the provided plug does not fit
into your outlet, consult an electrician for replacement of the obsolete outlet.
PROTECT the power cord from being walked on or pinched, particularly at plugs,
convenience receptacles, and the point where they exit from the apparatus.
11.
12.
13.
14.
15.
ONLY USE attachments/accessories specified by the manufacturer.
USE only with a cart, stand, tripod, bracket, or table
specified by the manufacturer, or sold with the
apparatus. When a cart is used, use caution when
moving the cart/apparatus combination to avoid
injury from tip-over.
UNPLUG this apparatus during lightning storms or when unused for long periods of
time.
REFER all servicing to qualified service personnel. Servicing is required when the
apparatus has been damaged in any way, such as power-supply cord or plug is damaged, liquid has been spilled or objects have fallen into the apparatus, the apparatus
has been exposed to rain or moisture, does not operate normally, or has been
dropped.
DO NOT expose the apparatus to dripping and splashing. DO NOT put objects
filled with liquids, such as vases, on the apparatus.
This symbol indicates that there are important operating and
maintenance instructions in the literature accompanying this unit.
This symbol indicates that dangerous voltage constituting a risk
of electric shock is present within this unit.
WARNING: Voltages in this equipment are hazardous to life. No user-serviceable parts inside. Refer all servicing to qualified service personnel. The
safety certifications do not apply when the operating voltage is changed from the factory setting.
DESCRIPTION
The Shure PA821 Antenna Combiners actively combine antenna outputs from up to eight PSM wireless transmitters to a single antenna, improving RF performance and reducing rack clutter.
MADE IN USA PA821 ANTENNA COMBINER
SHURE INCORPORATED
Set the power switch on the front panel to Off before installing. Connect
the unit to an AC power source using the supplied power cable. Switch the
power On to use the device. The power light will illuminate. Power the unit
Off when not in use or before disconnecting the unit from the AC power
source.
PSM Transmitters
8-TO-1 COMBINING:
2.
3.
Using the supplied BNC-BNC cables, connect the ANTENNA OUTPUT of each transmitter to the ANTENNA INPUTS of the PA821
(Figure 2).
Attach an antenna to the MAIN OUT of PA821. For wideband applications, use PA805WB directional antenna (Figure 1).
Connect the PA821 to a power outlet using one of the supplied
power cables. The PA821 contains a universal power supply to operate anywhere in the world.
AC
POWER
®
PA821
1 2 3 4 5 6 7 8
POWER
MADE IN USA
PA821 ANTENNA COMBINER
SHURE INCORPORATED
RF ANTENNA INPUTS
50W BNC
INSTALLATION
1.
RF ANTENNA INPUTS
FIGURE 2
FIGURE 1
ENGLISH
SPECIFICATIONS
FOR MORE THAN 8 TANSMITTERS:
1.
Using the supplied BNC-BNC cables, connect the ANTENNA OUTPUT of each transmitter to the ANTENNA INPUTS of the PA821.
2.
Use the 1 ft. jumper BNC-BNC cable to connect the MAIN OUTPUT of the PA821 to the A IN of the EXPANSION PORT.
3.
Connect another ANTENNA OUTPUT (from a ninth PSM transmitter, second PA821 or other antenna port) to the B IN of the
RF Carrier Frequency Range
470-870 MHz (470-806 MHz in U.S.A. and Canada)
System Gain
+0/-5 dB
Output Port Isolation
Greater than 55 dB
EXPANSION PORT.
4.
Third Order Intercept Point (3 OIP)
Greater than 25 dBm
Input AC Line Voltage
100-240 Vac, 50/60 Hz
Maximum Input Line VA
100 VA
Maximum Current Drain
0.42-1.0 Amperes
(Amperes = 100 VA/Input AC Line Voltage)
Maximum RF Input Power
24 dBm (250 mW)
Impedance
50 W nominal
Operating Temperature Range
0° F (-18° C) to +135° F (+57° C)
NOTE: Electrical safety approval is based on a maximum
ambient temperature of 35°C.
Overall Dimensions
43.4 mm high x 398.8 mm wide x331.5 mm deep
(1 11/16 in. H x 15 11/16 in. W x 13 1/2 in. D)
Net Weight
4.53 Kg (10 lbs unpackaged, without power and RF cables)
Input/Output Connector Type
BNC-type 8 input, 1 output ACTIVE
2 Inputs, 1 output EXPANSION PORT
Attach an antenna to the A + B OUT of the EXPANSION PORT.
For wideband applications, use the PA805WB directional antenna.
See Figure 3.
®
PA805WB
BNC
PA821
MAIN OUT INPUT SIGNAL
1 2 3 4 5 6 7 8
A IN B IN
A + B OUT
POWER
EXPANSION PORT
50 OHMS ACTIVE COMBINER
MADE IN USA PA821ANTENNACOMBINER
SHURE INCORPORATED
RFANTENNAINPUTS
50W BNC
FURNISHED ACCESSORIES
(8) 2 ft. Coaxial Cable (RG58/U) ...................................... UA802
1 ft Jumper..................................................................... 95E2035
120 VAC Power Line Cord............................................. 95A8389
230 VAC Power Line Cord............................................. 95A8247
240 VAC Power Line Cord (U.K.) .................................. 95A8713
PSM Transmitters
OPTIONAL ACCESSORIES
Wideband Unidirectional Antenna (470-870 MHz) ...... PA805WB
10 ft. Coaxial Cable (RG-58/U) ......................................... PA725
25 ft. Coaxial Cable (RG-8/U)........................................... UA825
50 ft. Coaxial Cable (RG-8/U)........................................... UA850
AC POWER
FIGURE 3
ENGLISH
CERTIFICATIONS
PA821: Certified to FCC Part 74 (FCC ID No. DD4PA821). Certified in
Canada by IC to RSS-123 AND RSS-102 (Certification No. IC 616APA821). UL Listed to UL6500 (2nd Edition) and cUL listed to CAN/CSA
E60065-00. Meets the Essential Requirements of the European R&TTE Directive 99/5/EC, eligible to bear CE mark. Meets EMC requirements of EN
301 489 Parts 1 and 9 and is GS-Certified to EN 60065 (6th Edition). Conforms to Australian EMC requirements, eleigible to bear C-Tick mark
(N108).
LICENSING
Changes or modifications not expressly approved by Shure Incorporated could void your authority to operate the equipment. Licensing of Shure
wireless microphone equipment is the user's responsibility, and licensability depends on the user's classification and application, and on the selected
frequency. Shure strongly urges the user to contact the appropriate telecommunications authority concerning proper licensing, and before choosing and ordering frequencies.
THIS RADIO EQUIPMENT IS INTENDED FOR USE IN
PROFESSIONAL ENTERTAINMENT AND SIMILAR
APPLICATIONS.
NOTE: THIS EQUIPMENT MAY BE CAPABLE OF
OPERATING ON SOME FREQUENCIES NOT AUTHORIZED
IN YOUR REGION. PLEASE CONTACT YOUR NATIONAL
AUTHORITY TO OBTAIN INFORMATION ON AUTHORIZED
FREQUENCIES FOR WIRELESS MICROPHONE PRODUCTS
IN YOUR REGION
Licensing: Note that a ministerial license to operate this
equipment may be required in certain areas. Consult your
national authority for possible requirements.
OPERATION OF THIS DEVICE IS SUBJECT TO
THE FOLLOWING TWO CONDITIONS:
1) THIS DEVICE MAY NOT CAUSE INTERFERENCE, AND
2) THIS DEVICE MUST ACCEPT ANY INTERFERENCE,
INCLUDING INTERFERENCE THAT MAY CAUSE
UNDESIRED OPERATION OF THE DEVICE.

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.4
Linearized                      : No
Modify Date                     : 2003:06:26 13:32:48-05:00
Create Date                     : 2003:06:26 09:56:20Z
Creator                         : FrameMaker 7.0
Page Count                      : 4
Creation Date                   : 2003:06:26 09:56:20Z
Mod Date                        : 2003:06:26 13:32:48-05:00
Producer                        : Acrobat Distiller 5.0.5 (Windows)
Metadata Date                   : 2003:06:26 13:32:48-05:00
Title                           : 27a8807.book
Page Mode                       : UseOutlines
Tagged PDF                      : Yes
Has XFA                         : No

EXIF Metadata provided by EXIF.tools