Sichuan Changhong Electronic Component R811USA2 WLAN 802.11a/b/g/n/ac module User Manual
Sichuan Changhong Electronic Component Co., Ltd. WLAN 802.11a/b/g/n/ac module
User Manual
| Download: |  |
| Mirror Download [FCC.gov] | |
| Document ID | 2990623 |
| Application ID | 5B/PRwXOGJvAdQovn/RA/w== |
| Document Description | User Manual |
| Short Term Confidential | No |
| Permanent Confidential | No |
| Supercede | No |
| Document Type | User Manual |
| Display Format | Adobe Acrobat PDF - pdf |
| Filesize | 169.12kB (2114015 bits) |
| Date Submitted | 2016-05-13 00:00:00 |
| Date Available | 2016-05-14 00:00:00 |
| Creation Date | 2016-03-21 13:45:34 |
| Producing Software | Acrobat Distiller 7.0 (Windows) |
| Document Lastmod | 2016-05-10 15:06:16 |
| Document Title | Microsoft Word - WIFI-2-R811USA2è§„æ ¼ä¹¦-20160321.doc |
| Document Creator | PScript5.dll Version 5.2 |
| Document Author: | 004 |
WIFI-2-R811USA2 IEEE 802.11a/ b/g/n/ac 1T1R USB2.0 Wi-Fi Module 特性 Features： ¾ 接收制式 Reserving System IEEE Std. 802.11a IEEE Std. 802.11b IEEE Std. 802.11g IEEE Std. 802.11n IEEE Std. 802.11ac ¾ 双波段 Dual Band 2.4G&5.8G ¾ 结构大小 Size 18.20mmx 14.80mm 四川长虹电子部品有限公司 Sichuan Changhong Electronic Component Co., LTD 地址 Add : 四川省绵阳市高新区绵兴东路 35 号 35,east mianxing road,high-tech park,mianyang,Sichuan,china 传真 Fax : +86-0816-2416943 网 址: http://www.changhong.com 技术 热线： WIFI-2-R811USA2 Dual Band 11ac USB WiFi Module with RTL8811AU 客户确认反馈 Feedback of customer’s Confirmation 经确认，我方承认该规格书 We accept the specification after Confirmed 客户名称 Customer name 客户签字 Customer signature 确认日期 Confirmation Date 请签字后将此页与首页按以下地址回传我公司，谢谢！ Please feed back this paper and first paper after your signature by the address,thanks! 地址：四川省绵阳市高新区绵兴东路 35 号长虹 909 厂区 ADD：Changhong 909 Factory,35,East Mianxing Road,High-tech Park,Mianyang,Sichuan,China 公司：四川长虹电子部品有限公司 Factory： Sichuan Changhong Electronic Component Co., LTD 批准 Approved 审核 Checked 拟制 Designed 四川长虹电子部品有限公司 Sichuan Changhong Electronic Component Co., Ltd. 产品 Product WIFI 模组 WIFI MODULE 型号 Model WIFI-2-R811USA2 日期 Date 2016-03-21 page 2 of 9 WIFI-2-R811USA2 Dual Band 11ac USB WiFi Module with RTL8811AU 更改记录 Record of Modification 序号 No 更改日期 Date of modification 20160124 20160321 主要更改内容 Main content of modification 1、增加包装； 2、增加回流曲线 3、增加产品图片 四川长虹电子部品有限公司 Sichuan Changhong Electronic Component Co., Ltd. 更改原因 Reason of modification 更改通知编号 Serial number of modification 确认 Confirm 首版 覃达开 完善规格书 覃达开 page 3 of 9 WIFI-2-R811USA2 Dual Band 11ac USB WiFi Module with RTL8811AU 1. Introduction WIFI-2-R811USA2 is based on realtek RTL8811AU, is a WLAN 11ac module, which fully supports the features and functional compliance of IEEE 802.11 a/b/g/n/ac standards. This documentation describes the engineering requirements specification. 1.1 RF module Overview The general HW architecture for the module is shown in Figure 1. This WLAN Module design is based on Realtek RTL8811AU. It is a highly integrated single-chip SISO(Single In Single Out) Wireless LAN (WLAN) USB2.0 network interface controller complying with the 802.11ac specification. It combines a MAC, a 1T1R capable baseband, and RF in a single chip. The RTL8811AU provides a complete solution for a high throughput performance wireless client. Figure 1 Module Block Diagram 1.2 Specification reference This specification is based on additional references listed below. _ IEEE Std. 802.11a _ IEEE Std. 802.11b _ IEEE Std. 802.11g _ IEEE Std. 802.11n _ IEEE Std. 802.11ac 1.3 System Functions Table1: General Specification as below: Main Chipset Operating Frequency Wi-Fi Standard Modulation Realtek RTL8811AU-VS 2.412~2.462GHz z& 5.745 -5.825 GHz 2.412~2.472GHz && 5.180 5.180 -5.240 -5.240 GH GHz& 802.11a/b/g/n/ac (1x1) WIFI: 11b: DBPSK, DQPSK and CCK and DSSS 11a/g: BPSK, QPSK, 16QAM, 64QAM and OFDM 11n: BPSK, QPSK, 16QAM, 64QAM and OFDM 11ac: BPSK, QPSK, 16QAM, 64QAM, 256QAM and OFDM 四川长虹电子部品有限公司 Sichuan Changhong Electronic Component Co., Ltd. page 4 of 9 WIFI-2-R811USA2 Dual Band 11ac USB WiFi Module with RTL8811AU Data rates Host Interface PCB Stack Dimension Operation Temperature up to 433.5Mbps USB 2.0 4-layers design Typical，18.20mm(L)*14.80mm(W) 0℃ to +60℃ Storage Temperature -25℃ to +85℃ Operation Voltage 3.3V +/-10% 2. Mechanical Specification 2.1 Mechanical Outline Drawing Typical Dimension ( L x W ): 18.20mmx 14.80mm Pin definition PIN 四川长虹电子部品有限公司 Sichuan Changhong Electronic Component Co., Ltd. Type GND GND RF GND GND D+ DVDD33 page 5 of 9 WIFI-2-R811USA2 Dual Band 11ac USB WiFi Module with RTL8811AU 3. FCC Statement This device complies with Part 15 of the FCC rules. Operation is subject to the following two conditions: 1) this device may not cause harmful interference, and 2) this device must accept any interference received, including interference that may cause undesired operation. Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: --Reorient or relocate the receiving antenna. --Increase the separation between the equipment and receiver. --Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. --Consult the dealer or an experienced radio/TV technician for help. Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. FCC Radiation Exposure Statement The modular can be installed or integrated in mobile or fix devices only. This modular cannot be installed in any portable device, for example, USB dongle like transmitters is forbidden. This modular complies with FCC RF radiation exposure limits set forth for an uncontrolled environment. This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter. This modular must be installed and operated with a minimum distance of 20 cm between the radiator and user body. If the FCC identification number is not visible when the module is installed inside another device, then the outside of the device into which the module is installed must also display a label referring to the enclosed module. This exterior label can use wording such as the following: “Contains Transmitter Module FCC ID: 2AC49-R811USA2. When the module is installed inside another device, the user manual of this device must contain below warning statements; 1. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference. (2) This device must accept any interference received, including interference that may cause undesired operation. 2. Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. The devices must be installed and used in strict accordance with the manufacturer's instructions as described in the user documentation that comes with the product. Any company of the host device which install this modular with limit modular approval should perform the test of radiated emission and spurious emission according to FCC part 15C and 15E : 15.247 , 15.209 and 15.407 requirement, Only if the test result comply with FCC part 15C and 15E: 15.247 ， 15.209 ，15.407 requirement，then the host can be sold legally. 四川长虹电子部品有限公司 Sichuan Changhong Electronic Component Co., Ltd. page 6 of 9 WIFI-2-R811USA2 Dual Band 11ac USB WiFi Module with RTL8811AU 4 Antenna matching The 3th Pin connect to antenna, please refer to design demand a). 模块和天线要求远离干扰源，模块地和天线地要求为一个整体。 b). PIN6为WIFI模组的RF接口，与天线之间布线要求共面阻抗为50Ω，建议使用弧线和直线，长度尽可能短。 c). L1, L2, C1组成π型匹配网络并靠近天线接口设计，具体根据天线推荐及排版设计的实测效果进行调整。 四川长虹电子部品有限公司 Sichuan Changhong Electronic Component Co., Ltd. page 7 of 9 WIFI-2-R811USA2 Dual Band 11ac USB WiFi Module with RTL8811AU 5. Package Information 修订 标记 修改摘要 日期 签名 A0 A1 A2 A3 包 装 信 息 13"x32mm 胶盘 自粘带 0.06x25.5mm 28M 每盘长度 1400pcs 每卷数量 注: 1.任意10个链孔累计误差不超过 ± 0.20mm; 2.材料厚度以在载带边缘测量为准 ; 3.载带长度方向100mm距离的非平行度不可超过 1mm; 4.非指明公差范围为 :± 0.1mm;超过250mm不计算累计误差 ; 5.型腔外形凡未标明处倒角 R为0.2-0.3;拔模斜度未标注的为 3° 以下; 6."○"带字母为重点管控尺寸，每次进料及生产时均需量测。 7.材料:防静电黑色PS； 8.所有尺寸均满足EIA-481-C要求; 单 位 图 号 电子承载带 四川长虹电子部品有限公司 Sichuan Changhong Electronic Component Co., Ltd. 件 数 模具编号 规 格 版本号 CH 材 料 绘图 日期 ZA 核准 审核 日期 黑色PS 视 日期 图 比 例 第 页 1:1 共 页 page 8 of 9 WIFI-2-R811USA2 Dual Band 11ac USB WiFi Module with RTL8811AU 6、Product Picture TOP VIEW BOTTOM VIEW 备注：图片仅供参考，背面字符中供应商标示、批次号等信息会稍有不同。 四川长虹电子部品有限公司 Sichuan Changhong Electronic Component Co., Ltd. page 9 of 9
Source Exif Data:
File Type : PDF File Type Extension : pdf MIME Type : application/pdf PDF Version : 1.6 Linearized : No Has XFA : No XMP Toolkit : Adobe XMP Core 4.2.1-c041 52.342996, 2008/05/07-20:48:00 Producer : Acrobat Distiller 7.0 (Windows) Create Date : 2016:03:21 13:45:34+08:00 Creator Tool : PScript5.dll Version 5.2 Modify Date : 2016:05:10 15:06:16+08:00 Metadata Date : 2016:05:10 15:06:16+08:00 Format : application/pdf Title : Microsoft Word - WIFI-2-R811USA2规格书-20160321.doc Creator : 004 Document ID : uuid:1ecc6de5-7761-441a-95ad-4fbd8dc56a6f Instance ID : uuid:960788c8-8422-4f2e-8602-2a68b4652bf8 Page Count : 9 Author : 004EXIF Metadata provided by EXIF.tools