Siemens Canada Siemens Milltronics Process Instruments LR200 Radar Level Gauge User Manual 7ML19985FH02 3

Siemens Canada Ltd. - Siemens Milltronics Process Instruments Radar Level Gauge 7ML19985FH02 3

Contents

manual FCC warning draft

7ML19985FH03 SITRANS LR 400 – INSTRUCTION MANUAL Page 1mmmmmGeneral InformationGeneral InformationThe ManualRefer to this manual for proper installation, operation and maintenance of the SITRANS LR 400 Radar Level Instrument. Special attention must be paid to warnings and notices highlighted from the rest of the text by grey boxes.• These instructions do not claim to cover all details or variations in equipment, or to provide for every possible contingency that may arise during installation, operation, or maintenance.• For further information or to resolve issues not covered in the manual, consult your Siemens Milltronics representative.• The contents of the manual shall not become part of or modify any prior or existing agreement, commitment or relationship. The Sales Contract contains the entire obligation of Siemens Milltronics. The warranty contained in the contract between the parties is the sole warranty of Siemens Milltronics.WARNING means that failure to observe the necessary precautions can result in death, serious injury, and/or considerable material damage.Note means important information about the actual product or that part of the operating manual.Note: This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a commercial environment. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instruction manual, may cause harmful interference to radio communications. Operation of this equipment in a residential area is likely to cause harmful interference in which case the user will be required to correct the interference at his own expense.WARNINGS:• Changes or modifications not expressly approved by Siemens Milltronics could void the user’s authority to operate the equipment.• This equipment is intended to be used only in fully enclosed metal and concrete containers.IMPORTANT: All specifications are subject to change without notice. Please ensure that any safety-related information is confirmed with a qualified Siemens Milltronics representative.

Navigation menu