Siemens Canada Siemens Milltronics Process Instruments LR200 Radar Level Gauge User Manual 7ML19985FH02 3

Siemens Canada Ltd. - Siemens Milltronics Process Instruments Radar Level Gauge 7ML19985FH02 3

Contents

manual FCC warning draft

7ML19985FH03 SITRANS LR 400 – INSTRUCTION MANUAL Page 1
mmmmm
General Information
General Information
The Manual
Refer to this manual for proper installation, operation and maintenance of the SITRANS
LR 400 Radar Level Instrument.
Special attention must be paid to warnings and notices highlighted from the rest of the
text by grey boxes.
These instructions do not claim to cover all details or variations in equipment, or to
provide for every possible contingency that may arise during installation, operation,
or maintenance.
For further information or to resolve issues not covered in the manual, consult your
Siemens Milltronics representative.
The contents of the manual shall not become part of or modify any prior or existing
agreement, commitment or relationship. The Sales Contract contains the entire
obligation of Siemens Milltronics. The warranty contained in the contract between
the parties is the sole warranty of Siemens Milltronics.
WARNING means that failure to observe the necessary precautions can result in
death, serious injury, and/or considerable material damage.
Note means important information about the actual product or that part of the
operating manual.
Note: This equipment has been tested and found to comply with the limits for a Class
A digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to
provide reasonable protection against harmful interference when the equipment is
operated in a commercial environment. This equipment generates, uses, and can
radiate radio frequency energy and, if not installed and used in accordance with the
instruction manual, may cause harmful interference to radio communications.
Operation of this equipment in a residential area is likely to cause harmful
interference in which case the user will be required to correct the interference at his
own expense.
WARNINGS:
Changes or modifications not expressly approved by Siemens Milltronics
could void the user’s authority to operate the equipment.
This equipment is intended to be used only in fully enclosed metal and
concrete containers.
IMPORTANT: All specifications are subject to change without notice.
Please ensure that any safety-related information is confirmed with a
qualified Siemens Milltronics representative.

Navigation menu