Siemens RF310R Tag Reader User Manual

Siemens AG Tag Reader SIMATIC Sensors RFID systems SIMATIC RF300

a href="https://usermanual.wiki/Siemens" itemprop="url"> Siemens >

User Manual IV

Communication modules 7.7 RF170C SIMATIC RF300 System Manual, 06/2008, A5E01642529-02 221 After start-up or updating the firmware, the LEDs SF, PRE, ERR and ACT indicate the operating status or faults of the RF170C: SF PRE_1 ERR_1 ACT_1 PRE_2 ERR_2 ACT_2 Description Off Off Off On Off Off Off Start-up active On Off On Off Off Off Off Checksum error at start-up * On Off Off Off Off On Off Firmware invalid * On On On On On On On LED test for approximately 4 seconds; otherwise firmware fault * On Off On On Off On On Checksum error at start-up * On On On On Off On On Checksum error of the firmware * On Off On On On On On External RAM defective * On On Off On On On On ESSA3 defective * On Off On On On Off On ID error firmware * – Off 1 x flash every 3 s Off Off 1 x flash every 3 s Off RF170C successfully started up, waiting for reset command – – n x flash every 3 s – – m x flash every 3 s – The number of flashes (n, m) indicates the last reported error on a given channel. – – Flashing Rapid flashing – Flashing Rapid flashing Firmware update; alternate flashing of the error LEDs at approximately 1 Hz – = not relevant * If this fault recurs, the module is defective and must be replaced.
Download:
Mirror Download [FCC.gov]
Document ID986216
Application IDkdEYIfZpbyuZiu/KMw+MZw==
Document DescriptionUser Manual IV
Short Term ConfidentialNo
Permanent ConfidentialNo
SupercedeNo
Document TypeUser Manual
Display FormatAdobe Acrobat PDF - pdf
Filesize128.91kB (1611346 bits)
Date Submitted2008-08-18 00:00:00
Date Available2008-08-18 00:00:00
Creation Date2008-08-18 16:15:31
Producing SoftwareAcrobat Distiller 7.0.5 (Windows)
Document Lastmod2008-08-18 16:15:44
Document TitleSIMATIC Sensors RFID systems SIMATIC RF300
Document CreatorAcrobat PDFMaker 7.0.7 für Word
Document Author: I IA SE ITS POI 4
FCC ID Filing: NXW-RF310R

Navigation menu