Sierra Wireless MC5720 Express Mini-PCI USB Wireless CDMA 1xEV-DO Module User Manual Regulatory Safety and Environmental Notices

Sierra Wireless Inc. Express Mini-PCI USB Wireless CDMA 1xEV-DO Module Regulatory Safety and Environmental Notices

UserManual.wiki >

Sierra Wireless >

MC5720 User Manual >

Contents

User Manual 1

Regulatory, Safety and Environmental NoticesDocument Part Number: 384459-003May 2005

iii Regulatory, Safety and Environmental NoticesContentsModem notices. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14Telecommunications device approvals . . . . . . . . . . . . 15U.S. modem statements . . . . . . . . . . . . . . . . . . . . . . . . 15Canadian modem statements . . . . . . . . . . . . . . . . . . . . 18Japanese modem statements . . . . . . . . . . . . . . . . . . . . 18New Zealand modem statements. . . . . . . . . . . . . . . . . 19Power cord notice. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21Japanese power cord notice . . . . . . . . . . . . . . . . . . . . . 21Macrovision Corporation notice . . . . . . . . . . . . . . . . . . . . 212Safety noticesTravel notice. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 23Battery notices . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 23Power cord notices . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 243 Environmental noticesBattery disposal . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 25United States mercury disposal . . . . . . . . . . . . . . . . . . . . . 25Disposal of waste equipment by users in private households in the European Union . . . . . . . . . . . . . . . . . . 26Index

Regulatory, Safety and Environmental Notices 11Regulatory noticesThis chapter provides country-specific nonwireless and wireless regulatory notices and compliance information for your computer. Some notices may not apply to your computer.Your computer model may be shipped with one or more integrated wireless devices installed. In some environments, the use of wireless devices may be restricted. Such restrictions may apply aboard airplanes, in hospitals, near explosives, in hazardous locations, and so on. If you are uncertain of the policy that applies to the use of this device, ask for authorization to use it before you turn it on.To identify a hardware device, such as a wireless LAN (WLAN) network device, on your computer, open the Device Manager utility using the following steps:1. Select Start > My Computer > View system information.2. Select the Hardware tab, and then select Device Manager.Expand the Network adapters list to identify the wireless network devices installed on your computer.

2 Regulatory, Safety and Environmental NoticesRegulatory noticesFederal Communications Commission noticeThis equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation.If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:■Reorient or relocate the receiving antenna.■Increase the separation between the equipment and receiver.■Connect the equipment to an outlet on a circuit different from that to which the receiver is connected.■Consult the dealer or an experienced radio or television technician for help.ModificationsThe FCC requires the user to be notified that any changes or modifications made to this device that are not expressly approved by HP may void the user’s authority to operate the equipment.CablesTo maintain compliance with FCC Rules and Regulations, connections to this device must be made with shielded cables having metallic RFI/EMI connector hoods.

4 Regulatory, Safety and Environmental NoticesRegulatory noticesProducts with wireless LAN devicesÅWARNING: Exposure to Radio Frequency Radiation The radiated output power of this device is below the FCC radio frequency exposure limits. Nevertheless, the device should be used in such a manner that the potential for human contact is minimized during normal operation of tablet PCs and notebooks. During normal operation of tablet PCs: To avoid the possibility of exceeding the FCC radio frequency exposure limits, human proximity to the antennae should not be less than 2.5 cm (1 inch). During normal operation of notebooks: To avoid the possibility of exceeding the FCC radio frequency exposure limits, human proximity to the antennae should not be less than 20 cm (8 inches), including when the computer display is closed.ÄCAUTION: When using IEEE 802.11a wireless LAN, this product is restricted to indoor use due to its operation in the 5.15- to 5.25-GHz frequency range. The FCC requires this product to be used indoors for the frequency range of 5.15 GHz to 5.25 GHz to reduce the potential for harmful interference to co-channel mobile satellite systems. High power radar is allocated as the primary user of the 5.25- to 5.35-GHz and 5.65- to 5.85-GHz bands. These radar stations can cause interference with and/or damage to this device.

Regulatory noticesRegulatory, Safety and Environmental Notices 5Brazilian noticeEste equipamento opera em caráter secundário, isto é, não tem direito a proteção contra interferência prejudicial, mesmo de estações do mesmo tipo, e não pode causar interferência a sistemas operando em caráter primário.Unless the computer has an Intel® PRO/Wireless 2100 Wireless LAN radio or an Intel PRO/Wireless 2200 Wireless LAN radio, the Brazilian certification mark is located on the bottom of the notebook.The Intel PRO/Wireless 2100 Wireless LAN has the certification mark below:The Intel PRO/Wireless 2200 Wireless LAN has the certification mark below:-

6 Regulatory, Safety and Environmental NoticesRegulatory noticesCanadian noticesThis Class B digital apparatus meets all requirements of the Canadian Interference-Causing Equipment Regulations.Wireless operation is subject to 2 conditions. The first is that the wireless device may not cause interference. The second is that the wireless device must accept any interference, including interference that may cause undesired operation of the device.Avis CanadienCet appareil numérique de la classe B respecte toutes les exigences du Règlement sur le matériel brouilleur du Canada.European Union noticesProducts bearing the CE marking comply with the following EU Directives:■Low Voltage Directive 73/23/EEC■EMC Directive 89/336/EEC CE compliance of this product is valid only if powered with the correct CE-marked AC adapter provided by HP. If this product has telecommunications functionality, it also complies with the essential requirements of the following EU Directive:■R&TTE Directive 1999/5/EC

Regulatory noticesRegulatory, Safety and Environmental Notices 7Compliance with these directives implies conformity to harmonized European standards (European Norms) that are listed in the EU Declaration of Conformity issued by HP for this product or product family. This compliance is indicated by one of the following conformity markings placed on the product.■This CE marking is valid for non-telecommunications, EU harmonized telecommunications products such as Bluetooth.■This CE marking is valid for EU non-harmonized telecommunications products. *If applicable, a notified body number is used. Refer to the regulatory label provided on this product. The telecommunications functionality of this product may be used in the following EU and EFTA countries: Austria, Belgium, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Liechtenstein, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Slovak Republic, Slovenia, Spain, Sweden, Switzerland, and United Kingdom.(xxxx*)

8 Regulatory, Safety and Environmental NoticesRegulatory noticesProducts with 2.4-GHz wireless LAN devices FranceL’utilisation de cet equipement (2.4GHz wireless LAN) est soumise à certaines restrictions : cet equipement peut être utilisé à l’interieur d’un batiment en utilisant toutes les frequences de 2400 a 2483.5MHz (Chaine 1–13). Pour une utilisation en environnement exterieur, vous devez utiliser les frequences comprises entre 2454 a 2483.5-MHz (Chaine 10–13). Pour les dernières restrictions, voir http://www.art-telecom.fr.For 2.4-GHz wireless LAN operation of this product, certain restrictions apply. This equipment may use the entire 2400-MHz to 2483.5-MHz frequency band (channels 1 through 13) for indoor applications. For outdoor use, only the 2454-MHz to 2483.5-MHz frequency band (channels 10 through 13) may be used. For the latest requirements, see http://www.art-telecom.fr.ItalyE’necessaria una concessione ministeriale anche per l’uso del prodotto. Verifici per favore con il proprio distributore o direttamente presso la Direzione Generale Pianificazione e Gestione Frequenze.License required for use. Verify with your dealer or directly with the General Direction for Frequency Planning and Management (Direzione Generale Pianificazione e Gestione Frequenze).

Regulatory noticesRegulatory, Safety and Environmental Notices 9Products with 5-GHz wireless LAN devicesFrequency availability for 802.11a or 802.11h wireless LAN is not currently harmonized throughout the European Union. For compliance requirements, users should verify compliance with their supplier, local HP office, or telecommunications authority.Ergonomics noticeGermanComputers bearing the “GS” approval mark meet the applicable ergonomic requirements when used in conjunction with docking bases, keyboards, and monitors that bear the “GS” approval mark. Computers in a stand-alone mode are not intended for continuous use in an office environment.Indian noticeThe India Telegraph Act of 1885 requires that an IEEE 802.11a wireless LAN end user obtain a license. To obtain this license, please contact The Wireless Planning & Coordination Wing, Ministry of Communications, Sanchar Ghavan New Delhi.

10 Regulatory, Safety and Environmental NoticesRegulatory noticesJapanese noticesWireless LAN 802.11b devices2. 4DS 4

Regulatory noticesRegulatory, Safety and Environmental Notices 11Wireless LAN 802.11g devicesBluetooth® devicesKorean noticeTaiwan notice2. 4OF 42 . 4 F H 1

Regulatory noticesRegulatory, Safety and Environmental Notices 13Laser safety noticesAll systems equipped with laser products comply with appropriate safety standards, including IEC 60825. With specific regard to the laser, the equipment complies with laser product performance standards set by government agencies for Class 1 laser products. It does not emit hazardous light; the beam is totally enclosed during all modes of customer operation and maintenance.CDRH regulationsThe Center for Devices and Radiological Health (CDRH) of the U.S. Food and Drug Administration implemented regulations for laser products effective August 2, 1976. These regulations apply to laser products manufactured from August 1, 1976, onward. Compliance is mandatory for products marketed in the United States.ÅWARNING: Use of controls or adjustments, or performance of procedures other than those specified herein or in the laser product installation guide, may result in hazardous radiation exposure.Laser information■Laser Type: Semiconductor GaAlAs■Wave Length: 780 ± 35 nm■Divergence Angle: 53.5 degrees ± 1.5 degreesThis system is classified as a Class 1 laser product. This label appears on the laser product.

14 Regulatory, Safety and Environmental NoticesRegulatory notices■Output Power: Less than 0.2mW or 10,869 W·m-2sr-1■Polarization: Circular■Numerical Aperture: 0.45 ± 0.04Only authorized technicians trained by HP should attempt to repair this equipment. All troubleshooting and repair procedures are detailed to allow only subassembly and module-level repair. Because of the complexity of the individual boards and subassemblies, no one should attempt to make repairs at the component level or to make modifications to any printed wiring board. Improper repairs can create a safety hazard.Modem noticesÅWARNING: To reduce the risk of fire, electric shock, and injury to persons when using this device, always follow basic safety precautions, including the following:■Do not use this product near water—for example, near a bathtub, wash bowl, kitchen sink or laundry tub, in a wet basement, or near a swimming pool.■Avoid using this product during an electrical storm. There is a remote risk of electric shock from lightning.■Do not use this product to report a gas leak while in the vicinity of the leak.■Always disconnect the modem cable before opening the equipment enclosure or touching an uninsulated modem cable, jack, or internal component.■If this product was not provided with a telephone line cord, use only No. 26 AWG or larger telecommunication line cord.■Do not plug a modem or telephone cable into the RJ-45 (network) jack.SAVE THESE INSTRUCTIONS

Regulatory noticesRegulatory, Safety and Environmental Notices 15Telecommunications device approvalsThe telecommunications device in your computer is approved for connection to the telephone network in the countries whose approval markings are indicated on the product label located on the bottom of the computer or on the modem.Refer to the documentation included with the product to ensure that the product is configured for the country in which the product is located. Selecting a country other than the one in which it is located may cause your modem to be configured in a way that violates the telecommunication regulations/laws of that country. In addition, your modem may not function properly if the correct country selection is not made. If, when you select a country, a message appears that states that the country is not supported, this means that the modem has not been approved for use in this country and thus should not be used.U.S. modem statementsThis equipment complies with Part 68 of the FCC Rules and the requirements adopted by the ACTA. On the bottom of the computer or on the modem is a label that contains, among other information, a product identifier in the format US:AAAEQ##TXXXX. Provide this information to the telephone company if you are requested to do so.Applicable certification jack USOC = RJ11C. A plug and jack used to connect this equipment to the premises wiring and telephone network must comply with the applicable FCC Part 68 rules and requirements adopted by the ACTA. A compliant telephone cord and modular plug is provided with this product. It is designed to be connected to a compatible modular jack that is also compliant. See installation instructions for details.

16 Regulatory, Safety and Environmental NoticesRegulatory noticesThe REN is used to determine the number of devices that may be connected to a telephone line. Excessive RENs on a telephone line may result in the devices not ringing in response to an incoming call. In most but not all locations, the sum of RENs should not exceed five (5.0). To be certain of the number of devices that may be connected to a line, as determined by the total RENs, contact the local telephone company. For products approved after July 23, 2001, the REN for this product is part of the product identifier that has the format US:AAAEQ##TXXXX. The digits represented by ## are the REN without a decimal point (e.g., 03 is a REN of 0.3). For earlier products, the REN is separately shown on the label.If this HP equipment causes harm to the telephone network, the telephone company will notify you in advance that temporary discontinuance of service may be required. But, if advance notice isn’t practical, the telephone company will notify you as soon as possible. Also, you will be advised of your right to file a complaint with the FCC if you believe it is necessary.The telephone company may make changes to its facilities, equipment, operations, or procedures that could affect the operation of the equipment. If this happens, the telephone company will provide advance notice in order for you to make necessary modifications to maintain uninterrupted telephone service.If trouble is experienced with this equipment, call Customer Care. If the equipment is causing harm to the telephone network, the telephone company may request that you disconnect the equipment until the problem is resolved. You should perform repairs only to the equipment specifically discussed in the “Troubleshooting” section of the user guide, if one is provided.

Regulatory noticesRegulatory, Safety and Environmental Notices 17Connection to party line service is subject to state tariffs. Contact the state public utility commission, public service commission, or corporation commission for information.If your home has specially wired alarm equipment connected to the telephone line, ensure that the installation of this HP equipment does not disable your alarm equipment. If you have questions about what will disable alarm equipment, consult your telephone company or a qualified installer.The Telephone Consumer Protection Act of 1991 makes it unlawful for any person to use a computer or other electronic device, including fax machines, to send any message unless such message clearly contains in a margin at the top or bottom of each transmitted page, or on the first page of the transmission, the date and time it is sent and an identification of the business, other entity, or other individual sending the message, and the telephone number of the sending machine or such business, other entity, or individual. (The telephone number provided may not be a 900 number or any other number for which charges exceed local or long-distance transmission charges).In order to program this information into your fax machine, you should complete the steps outlined in the faxing software instructions.

18 Regulatory, Safety and Environmental NoticesRegulatory noticesCanadian modem statementsThis equipment meets the applicable Industry Canada technical specifications. The Ringer Equivalence Number, REN, is an indication of the maximum number of devices allowed to be connected to a telephone interface. The termination on an interface may consist of any combination of devices, subject only to the requirement that the sum of the RENs of all devices does not exceed 5. The REN for this terminal equipment is 1.0. Japanese modem statementsUnless the computer has an Agere modem or a Conexant modem, the appropriate Japanese certification mark is located on the modem label on the bottom of the computer.An Agere modem has the following Japanese certification mark located on the modem label on the bottom of the computer:A Conexant modem has the following Japanese certification mark located on the modem label on the bottom of the computer.

Regulatory noticesRegulatory, Safety and Environmental Notices 19New Zealand modem statementsThe grant of a Telepermit for any item of terminal equipment indicates only that Telecom has accepted that the item complies with minimum conditions for connection to its network. It indicates no endorsement of the product by Telecom, nor does it provide any sort of warranty. Above all, it provides no assurance that any item will work correctly in all respects with another item of Telepermitted equipment of a different make or model, nor does it imply that any product is compatible with all of Telecom’s network services.This equipment is not capable, under all operating conditions, of correct operation at the higher speeds for which it is designed. Telecom will accept no responsibility should difficulties arise in such circumstances.If this device is equipped with pulse dialing, note that there is no guarantee that Telecom lines will always continue to support pulse dialing.Use of pulse dialing, when this equipment is connected to the same line as other equipment, may give rise to bell tinkle or noise and may also cause a false answer condition. Should such problems occur, the user should not contact the Telecom Faults Service.

20 Regulatory, Safety and Environmental NoticesRegulatory noticesSome parameters required for compliance with Telecom’s Telepermit requirements are dependent on the equipment (PC) associated with this device. The associated equipment shall be set to operate within the following limits for compliance with Telecom’s Specifications.a. There shall be no more than 10 call attempts to the same number within any 30-minute period for any single manual call initiation.b. The equipment shall go on-hook for a period of not less than 30 seconds between the end of one attempt and the beginning of the next attempt.c. Where automatic calls are made to different numbers, the equipment shall be set to go on-hook for a period of not less than 5 seconds between the end of one attempt and the beginning of the next attempt.d. The equipment shall be set to ensure that calls are answered between 3 and 30 seconds of receipt of ringing (So set between 2 and 10).Voice supportAll persons using this device for recording telephone conversations shall comply with New Zealand law. This requires that at least one party to the conversation is aware that it is being recorded. In addition, the Principles enumerated in the Privacy Act 1993 shall be complied with in respect to the nature of the personal information collected, the purpose for its collection, how it is to be used, and what is disclosed to any other party.This equipment shall not be set to make automatic calls to the Telecom ‘111’ Emergency Service.

Regulatory noticesRegulatory, Safety and Environmental Notices 21Power cord noticeIf you were not provided with a power cord for your computer or for an external power accessory intended for use with your computer, you should purchase a power cord that is approved for use in your country.The power cord must be rated for the product and for the voltage and current marked on the product’s electrical ratings label. The voltage and current rating of the cord should be greater than the voltage and current rating marked on the product. In addition, the diameter of the wire must be a minimum of 0.75 mm²/18AWG, and the length of the cord must be between 1.5 m (5 ft) and 2 m (6½ ft). If you have questions about the type of power cord to use, contact your service partner.A power cord should be routed so that it is not likely to be walked on or pinched by items placed upon it or against it. Particular attention should be paid to the plug, electrical outlet, and the point where the cord exits from the product.Japanese power cord noticeMacrovision Corporation noticeThis product incorporates copyright protection technology that is protected by method claims of certain U.S. patents and other intellectual property rights owned by Macrovision Corporation and other rights owners. Use of this copyright protection technology must be authorized by Macrovision Corporation and is intended for home and other limited viewing uses only, unless otherwise authorized by Macrovision Corporation. Reverse engineering or disassembly is prohibited.

Regulatory, Safety and Environmental Notices 232Safety noticesTravel noticeÅWARNING: To reduce the risk of electric shock, fire, or damage to the equipment, do not attempt to power the computer with a voltage converter kit sold for appliances.Battery noticesÅWARNING: To reduce the risk of fire or burns, do not disassemble, crush, or puncture a battery pack; short the external contacts on a battery pack; or dispose of a battery pack in fire or water. Do not expose a battery pack to temperatures above 60°C (140°F). ÅWARNING: Keep the battery pack away from children.ÅWARNING: To reduce potential safety issues, only the battery pack provided with the computer, a replacement battery pack provided by HP, or a compatible battery pack purchased as an accessory from HP should be used with the computer.

24 Regulatory, Safety and Environmental NoticesSafety noticesPower cord noticesÅWARNING: To reduce the risk of electric shock or damage to your equipment:■Plug the power cord into an AC outlet that is easily accessible at all times.■Disconnect power from the notebook by unplugging the power cord from the AC outlet (not by unplugging the power cord from the notebook).■If provided with a 3-pin attachment plug on your power cord, plug the cord into a grounded (earthed) 3-pin outlet. Do not disable the power cord grounding pin; for example, by attaching a 2-pin adapter. The grounding pin is an important safety feature.ÅWARNING: To reduce potential safety issues, only the AC adapter provided with the computer, a replacement AC adapter provided by HP, or an AC adapter purchased as an accessory from HP should be used with the computer.

Regulatory, Safety and Environmental Notices 253Environmental noticesThis chapter provides country-specific environmental notices and compliance information for your computer. Some notices may not apply to your computer.Battery disposalNWARNING: When a battery pack has reached the end of its useful life, do not dispose of the battery pack in general household waste. Follow the local laws and regulations in your area for computer battery pack disposal.In Europe, dispose of or recycle the battery packs by using the public collection system or by returning them to HP, your service partner, or their agents. United States mercury disposalThis computer contains mercury in the fluorescent lamp of the computer display, which may require special handling when the computer has reached the end of its useful life. Because of environmental considerations, local authorities may regulate the disposal of the mercury. For disposal or recycling information, please contact your local authorities or the Electronic Industries Alliance (EIA) at http://www.eiae.org.

26 Regulatory, Safety and Environmental NoticesEnvironmental noticesDisposal of waste equipment by users in private households in the European UnionThis symbol on the product or on its packaging indicates that this product must not be disposed of with your other household waste. Instead, it is your responsibility to dispose of your waste equipment by handing it over to a designated collection point for the recycling of waste electrical and electronic equipment. The separate collection and recycling of your waste equipment at the time of disposal will help to conserve natural resources and ensure that it is recycled in a manner that protects human health and the environment. For more information about where you can drop off your waste equipment for recycling, please contact your local city office, your household waste disposal service or the shop where you purchased the product.