Sierra Wireless P5186-SK GSM/GPRS Starter Kit P5186 User Manual WM PRJ WM3 3 PTS 005 001
Sierra Wireless, Inc. GSM/GPRS Starter Kit P5186 WM PRJ WM3 3 PTS 005 001
Users Manual
| Download: |  |
| Mirror Download [FCC.gov] | |
| Document ID | 368454 |
| Application ID | 5Oy/d63UR/J35RIiacYWUg== |
| Document Description | Users Manual |
| Short Term Confidential | No |
| Permanent Confidential | No |
| Supercede | No |
| Document Type | User Manual |
| Display Format | Adobe Acrobat PDF - pdf |
| Filesize | 165.41kB (2067639 bits) |
| Date Submitted | 2003-10-27 00:00:00 |
| Date Available | 2003-10-27 00:00:00 |
| Creation Date | 2003-10-23 18:20:24 |
| Producing Software | Acrobat Distiller 5.0.5 (Windows) |
| Document Lastmod | 2003-10-23 18:24:05 |
| Document Title | WM_PRJ_WM3-3_PTS_005_001 |
| Document Creator | Acrobat PDFMaker 5.0 for Word |
| Document Author: | Frédéric TOMASI |
WISMO Pac P5100 series WISMO Pac P5186 module Starter kit User Guide Reference: P5186-SK User Manual Version: 1.1 Date: September 30, 2003 confidential © Page : 1 / 42 This document is the sole and exclusive property of WAVECOM. Not to be distributed or divulged without prior written agreement. Ce document est la propriété exlcusive de WAVECOM. Il ne peut être communiqué ou divulgué à des tiers sans son autorisation préalable. ERROR! REFERENCE SOURCE NOT FOUND.P5186 USER MANUAL V 1.0 Error! Reference source not found. Document Information Revision 001 1.1 Date 28 May 2003 23 oct. 03 History of the evolution Creation confidential © Page : 2 / 42 This document is the sole and exclusive property of WAVECOM. Not to be distributed or divulged without prior written agreement. Ce document est la propriété exclusive de WAVECOM. Il ne peut être communiqué ou divulgué à des tiers sans son autorisation préalable. ERROR! REFERENCE SOURCE NOT FOUND.P5186 USER MANUAL V 1.0 Error! Reference source not found. Contents Document Information ...........................................................................................................................................................................................2 Contents........................................................................................................................................................................................................................ 3 Cautions ........................................................................................................................................................................................................................ 5 Trademarks ................................................................................................................................................................................................................. 5 Overview........................................................................................................................................................................................................................ 6 Reference documents ............................................................................................................................................................................................ 7 List of abbreviations ............................................................................................................................................................................................... 8 Mother board block diagram............................................................................................................................................................... 9 Hardware description ........................................................................................................................................................................... 10 2.1 Mother board .......................................................................................................................... 10 2.2 Socket up................................................................................................................................ 12 2.3 Antenna connection................................................................................................................ 13 Connector description...........................................................................................................................................................................14 3.1 WISMO Pac P5186 signals .................................................................................................... 14 3.2 J100 connector ....................................................................................................................... 14 3.3 J101 connector ....................................................................................................................... 16 3.4 J102 connector ....................................................................................................................... 18 3.5 J104 connector (SIM) ............................................................................................................. 20 3.6 J200 connector (external power supply) ................................................................................ 20 3.7 J201 connector (battery charger) ........................................................................................... 21 3.8 J300 (RF connector).................................................................Error! Bookmark not defined. 3.9 J301 (Socket up) .................................................................................................................... 21 3.10 J302 (Socket up)..................................................................................................................... 24 3.11 J500 connector (Auxiliary audio) ............................................................................................ 27 3.12 J501 connector (Main audio) .................................................................................................. 28 3.13 J600 connector (RS232)......................................................................................................... 29 3.14 J700 connector (USB) ............................................................................................................ 30 confidential © Page : 3 / 42 This document is the sole and exclusive property of WAVECOM. Not to be distributed or divulged without prior written agreement. Ce document est la propriété exclusive de WAVECOM. Il ne peut être communiqué ou divulgué à des tiers sans son autorisation préalable. ERROR! REFERENCE SOURCE NOT FOUND.P5186 USER MANUAL V 1.0 Error! Reference source not found. Operating configuration ...................................................................................................................................................................... 31 Functional description..........................................................................................................................................................................33 5.1 Power supply .......................................................................................................................... 33 5.2 Charger function ..................................................................................................................... 33 5.3 SIM function............................................................................................................................ 33 5.4 RS232 function ....................................................................................................................... 34 5.4.1 Introduction 34 5.4.2 Shutdown of Max3238....................................................................................................... 35 5.5 Audio functions ....................................................................................................................... 35 5.6 ON/~OFF and BOOT function................................................................................................ 35 5.7 RESET function ...................................................................................................................... 36 5.8 KEYPAD function ................................................................................................................... 36 5.9 Antenna function..................................................................................................................... 36 5.10 ESD protections...................................................................................................................... 36 Getting started .......................................................................................................................................................................................... 37 6.1 Procedure ............................................................................................................................... 37 6.2 Trouble shooting..................................................................................................................... 38 Appendix.......................................................................................................................................................................................................42 confidential © Page : 4 / 42 This document is the sole and exclusive property of WAVECOM. Not to be distributed or divulged without prior written agreement. Ce document est la propriété exclusive de WAVECOM. Il ne peut être communiqué ou divulgué à des tiers sans son autorisation préalable. ERROR! REFERENCE SOURCE NOT FOUND.P5186 USER MANUAL V 1.0 Error! Reference source not found. Cautions This starter kit integers a modular transmitter. This device is to be used only for mobile and fixed applications. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. The antenna(s) used for this transmitter must not exceed a gain of 3 dBi for mobile operation and 7 dBi for fixed operation. Users and OEM integrators must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. OEM must also be provided with labelling instructions. This device contains 900 MHz GSM functions that are not operational in U.S. territories. This filing is only applicable for GSM 850 MHz and PCS 1900 MHz operations. Information provided herein by Wavecom is accurate and reliable. However no responsibility is assumed for its use. General information about Wavecom and its range of products is available at the following internet address: http://www.wavecom.com Trademarks WAVECOM, WISMO are trademarks or registered trademarks of Wavecom S.A. All other company and/or product names mentioned may be trademarks or registered trademarks of their respective owners. confidential © Page : 5 / 42 This document is the sole and exclusive property of WAVECOM. Not to be distributed or divulged without prior written agreement. Ce document est la propriété exclusive de WAVECOM. Il ne peut être communiqué ou divulgué à des tiers sans son autorisation préalable. ERROR! REFERENCE SOURCE NOT FOUND.P5186 USER MANUAL V 1.0 Error! Reference source not found. Overview This document is a description of the WISMO Pac P5186 Starter kit based on a mother board V2 Ref. WM01048-010-20. This Starter kit is an equipment which can be used to start software and hardware development based on WISMO Pac P5186 modules. Refer to the documentation of the WISMO Pac P5186 module for further information. confidential © Page : 6 / 42 This document is the sole and exclusive property of WAVECOM. Not to be distributed or divulged without prior written agreement. Ce document est la propriété exclusive de WAVECOM. Il ne peut être communiqué ou divulgué à des tiers sans son autorisation préalable. ERROR! REFERENCE SOURCE NOT FOUND.P5186 USER MANUAL V 1.0 Error! Reference source not found. Reference documents [1] MOTHER BOARD Starter kit Schematics and PCB, Release 2.0 Ref.: WM01048-010-20. [2] WISMO Pac P5186 module Product Technical Specification Ref.: WM_PRJ_P5100_PTS_001. [3] Firmware downloader User Guide Ref.: WM_SW_GEN_UGD_001. confidential © Page : 7 / 42 This document is the sole and exclusive property of WAVECOM. Not to be distributed or divulged without prior written agreement. Ce document est la propriété exclusive de WAVECOM. Il ne peut être communiqué ou divulgué à des tiers sans son autorisation préalable. ERROR! REFERENCE SOURCE NOT FOUND.P5186 USER MANUAL V 1.0 Error! Reference source not found. List of abbreviations ADC Analog to Digital Converter AUX AUXiliary CLK CLocK CTS Clear To Send DAI Digital Audio Interface DC Direct Current DCD Data Carrier Detect DCE Data Communication Equipment DSR Data Set Ready DTE Data Terminal Equipment DTR Data Terminal Ready ESD ElectroStatic Discharges GND GrouND GPI General Purpose Input GPIO General Purpose Input Output GPO General Purpose Output I/O Input / Output MIC MICrophone PC Personnal Computer PCM Pulse Code Modulation PWM Pulse Width Modulation RF Radio Frequency RI Ring Indicator RTC Real Time Clock RTS Request To Send RXD Receive Data SCI Smart Card Interface SIM Subscriber Identity Module SPI Serial Peripheral Interface SPK SPeaKer TXD Transmit Data USB Universal Serial Bus confidential © Page : 8 / 42 This document is the sole and exclusive property of WAVECOM. Not to be distributed or divulged without prior written agreement. Ce document est la propriété exclusive de WAVECOM. Il ne peut être communiqué ou divulgué à des tiers sans son autorisation préalable. ERROR! REFERENCE SOURCE NOT FOUND.P5186 USER MANUAL V 1.0 Error! Reference source not found. Mother board block diagram SM A 3 0 0 ANT M at c h in g c ir c u it J300 U SB In t er fac e J700 J P5 0 0 ES D p ro t ec t io n J500 J P5 0 1 A u x iliar y h an d s et in t er fac e J P5 0 2 J P5 0 3 J P5 0 4 ES D p r o t ec t io n J501 J P5 0 5 M ain h an d s et in t er f ac e J P5 0 6 J P5 0 7 So c k et u p W it h W ISM O Pac P5 1 8 6 M o d u le D VCC RS- 2 3 2 In t er f ac e J600 J104 ES D p r o t ec t io n CC8 _PRES SIM Car d h o ld er ES D p r o t ec t io n SW 2 0 1 O N /~ O FF SW 2 0 2 BOOT SW 2 0 3 /RESET ES D p r o t ec t io n VB A TT SW 2 0 0 RO W CO L F1 (3 A ) J200 Ex t ern a l s u p p ly J201 CH G_IN Po w er Su p p ly CC8 _PRES Key p a d D VCC Ch a rg er in p u t confidential © Page : 9 / 42 This document is the sole and exclusive property of WAVECOM. Not to be distributed or divulged without prior written agreement. Ce document est la propriété exclusive de WAVECOM. Il ne peut être communiqué ou divulgué à des tiers sans son autorisation préalable. ERROR! REFERENCE SOURCE NOT FOUND.P5186 USER MANUAL V 1.0 2 Hardware description 2.1 Error! Reference source not found. Mother board P5 1 8 6 So c k et u p p r in t J301 J100 J500 A u x . A u d io c o n n ec t o r J700 U SB c o n n ec t o r J501 M ain A u d io c o n n ec t o r J300 A n t en n a c o n n ec t io n SM A 3 0 0 A n t en n a Co n n ec t o r J600 RS2 3 2 c o n n ec t o r J302 J101 J104 SIM Co n n ec t o r SW400 SW405 SW410 SW415 SW420 J200 Ex t er n al Su p p ly Co n n ec t o r J201 D C c h ar g er In p u t KEYPA D SW 2 0 1 O N /∼O FF SW 2 0 2 BOOT SW404 SW409 SW414 SW419 SW 2 0 3 RESET J102 SW 2 0 0 confidential © Page : 10 / 42 This document is the sole and exclusive property of WAVECOM. Not to be distributed or divulged without prior written agreement. Ce document est la propriété exclusive de WAVECOM. Il ne peut être communiqué ou divulgué à des tiers sans son autorisation préalable. ERROR! REFERENCE SOURCE NOT FOUND.P5186 USER MANUAL V 1.0 Error! Reference source not found. Fu s e F1 (3 A ) confidential © Page : 11 / 42 This document is the sole and exclusive property of WAVECOM. Not to be distributed or divulged without prior written agreement. Ce document est la propriété exclusive de WAVECOM. Il ne peut être communiqué ou divulgué à des tiers sans son autorisation préalable. ERROR! REFERENCE SOURCE NOT FOUND.P5186 USER MANUAL V 1.0 Error! Reference source not found. 2.2 Socket up T o p v ie w W ISM O P5 1 8 6 M o d u le B o t t o m v ie w A n t en n a PA D J2 J3 Connection to the mother board: Socket up Mother board Antenna PAD J300 (RF connector type IMP) J3 J301 J2 J302 Warning: After 50 plug in and 50 plug out of the socket up on the mother board, the efficiency of the connection is no more guaranteed by the connector manufacturer: Connector designation 80- pin header on the mother board Manufacturer Part number 80- pin receptacle on the socket up HIROSE DF12(3.0)-80DP-0.5V(80) DF12(3.0)-80DS-0.5V(80) confidential © Page : 12 / 42 This document is the sole and exclusive property of WAVECOM. Not to be distributed or divulged without prior written agreement. Ce document est la propriété exclusive de WAVECOM. Il ne peut être communiqué ou divulgué à des tiers sans son autorisation préalable. ERROR! REFERENCE SOURCE NOT FOUND.P5186 USER MANUAL V 1.0 Error! Reference source not found. 2.3 Antenna connection SMA300 Antenna connector J300 (SMT connector) Antenna connection With the socket up confidential © Page : 13 / 42 This document is the sole and exclusive property of WAVECOM. Not to be distributed or divulged without prior written agreement. Ce document est la propriété exclusive de WAVECOM. Il ne peut être communiqué ou divulgué à des tiers sans son autorisation préalable. ERROR! REFERENCE SOURCE NOT FOUND.P5186 USER MANUAL V 1.0 Error! Reference source not found. 3 Connector description 3.1 WISMO Pac P5186 signals Some of the WISMO Pac P5186 interface signals mentioned hereafter are multiplexed in order to limit the number of pins. For further information about the WISMO Pac P5186 signals and multiplexing, refer to document [2] WISMO Pac P5186 module Product Technical Specification Ref.: WM_PRJ_P5100_PTS_001. 3.2 J100 connector J100 is a HE10 50-pin male connector. I/O I/O type Description Pin number Signal name 1, 2 GND 3, 4 VBATT 5, 6 GND AUX_ADC Analog Auxiliary ADC input BAT_TEMP Analog ADC input for battery temperature measurement 9, 10 GND 11 SPK_N Analog Main speaker negative output 12 SPK_P Analog Main speaker positive output 13 SPK_AUX_P Analog Auxiliary speaker positive output 14 SPK_AUX_N Analog Auxiliary speaker negative output 15 MIC_N Analog Main microphone negative input 16 MIC_P Analog Main microphone positive input 17 MIC_AUX_P Analog Auxiliary microphone positive input 18 MIC_AUX_N Analog Auxiliary microphone negative input 19, 20 GND 21 VIBRATOR Comment Ground I/O Battery voltage High current. Ground Ground Ground Analog Vibrator output Iout = 80 mA max Vout = 2.8 V max. confidential © Page : 14 / 42 This document is the sole and exclusive property of WAVECOM. Not to be distributed or divulged without prior written agreement. Ce document est la propriété exclusive de WAVECOM. Il ne peut être communiqué ou divulgué à des tiers sans son autorisation préalable. ERROR! REFERENCE SOURCE NOT FOUND.P5186 USER MANUAL V 1.0 Error! Reference source not found. Pin number Signal name I/O I/O type Description Comment 22 BAT_RTC I/O Supply RTC back-up supply 23 LED_OUT Open Drain output External LED driving and battery charging indicator 24 VCC Supply Digital supply for external 2V8 digital devices 25, 26 GND 27 CT108_2/DTR1 CMOS 2V8 Serial link (UART1) Data Terminal Ready Multiplexed with SPI2_DATA and GPIO14 28 CT106/CTS1 2V8 Serial link (UART1) Clear To Send Multiplexed with GPO2 29 CT107/DSR1 2V8 Serial link (UART1) Data Set Ready Multiplexed with SPI2_CLK and GPO4 30 CT103/TXD1 CMOS 2V8 Serial link (UART1) Transmit serial data Multiplexed with GPIO13 31 CT104/RXD1 2V8 Serial link (UART1) Receive serial data Multiplexed with GPO3 32 CT105/RTS1 CMOS 2V8 Serial link (UART1) Request To Send Multiplexed with GPIO15 33, 34 GND 35 GPIO12 I/O CMOS/2V8 General Purpose I/O Multiplexed with SCI_RST 36 GPIO10 I/O CMOS/2V8 General Purpose I/O Multiplexed with SCI_CLK 37 GPIO11 I/O CMOS/2V8 General Purpose I/O Multiplexed with SCI_DATA 38 GPIO8 I/O CMOS/1V8 General Purpose I/O Multiplexed with SCI_PRES and EXTINT3 39 GND 40 GPIO9 I/O CMOS/2V8 General Purpose I/O Multiplexed with SCI_PWR 41 GPIO4 I/O CMOS/1V8 General Purpose I/O Multiplexed with CLK32K 42 GND 43 GPO0 1V8 General Purpose O Multiplexed with CTS2 and PWM0 44 GPIO5 I/O CMOS/1V8 General Purpose I/O Multiplexed with USR0N and TXD2 45 IO_AUDIO I/O CMOS/2V8 External audio function control Multiplexed with DAI_RST 46 GPO1 1V8 General Purpose O Multiplexed with RXD2 Iout = 2 mA max Vout = 2.5 V max. Iout = 10 mA max. Ground Ground Ground Ground confidential © Page : 15 / 42 This document is the sole and exclusive property of WAVECOM. Not to be distributed or divulged without prior written agreement. Ce document est la propriété exclusive de WAVECOM. Il ne peut être communiqué ou divulgué à des tiers sans son autorisation préalable. ERROR! REFERENCE SOURCE NOT FOUND.P5186 USER MANUAL V 1.0 Error! Reference source not found. Pin number Signal name I/O I/O type Description Comment 47 GPIO6 I/O CMOS/2V8 General Purpose I/O Multiplexed with SCL and SPI3_DATA 48 GPIO7 I/O CMOS/2V8 General Purpose I/O Multiplexed with SDA and SPI3_CLK 49, 50 GND 3.3 Ground J101 connector J101 is a HE10 50-pin male connector. I/O I/O type Description Comment Pin number Signal name 1, 2 GND 3, 4 V-CORE supply Digital supply for external 1V8 digital devices 50 mA max. ON/OFF CMOS Schmitt Power control Power ON when high BUZ Open drain Buzzer output 7, 8 GND /WR 1V8 Write operation 10 D15 I/O CMOS/1V8 Data bus 15 11 D11 I/O CMOS/1V8 Data bus 11 12 D14 I/O CMOS/1V8 Data bus 14 13 D12 I/O CMOS/1V8 Data bus 12 14 D13 I/O CMOS/1V8 Data bus 13 15 D10 I/O CMOS/1V8 Data bus 10 16 D09 I/O CMOS/1V8 Data bus 9 17 D07 I/O CMOS/1V8 Data bus 7 18 D04 I/O CMOS/1V8 Data bus 4 19 D05 I/O CMOS/1V8 Data bus 5 20 D03 I/O CMOS/1V8 Data bus 3 21 A03 1V8 Address bus 3 22 D06 I/O CMOS/1V8 Data bus 6 23 /RD 1V8 Read operation 24 D08 I/O CMOS/1V8 Data bus 8 25 A02 1V8 Address bus 2 26 D02 I/O CMOS/1V8 Data bus 2 Ground Iout = 100 mA max. Vout = 0.4 V max. Ground Active low Active low confidential © Page : 16 / 42 This document is the sole and exclusive property of WAVECOM. Not to be distributed or divulged without prior written agreement. Ce document est la propriété exclusive de WAVECOM. Il ne peut être communiqué ou divulgué à des tiers sans son autorisation préalable. ERROR! REFERENCE SOURCE NOT FOUND.P5186 USER MANUAL V 1.0 Error! Reference source not found. Pin number Signal name I/O I/O type Description 27 D01 I/O CMOS/1V8 Data bus 1 28 D00 I/O CMOS/1V8 Data bus 0 29 LCDEN 1V8 LCD Enable Comment Active high Multiplexed with GPIO0 30 GND 31 BOOT Ground I/O CMOS 1V8 Schmitt Enable for flash downloading Multiplexed with GPIO2 P5186 module reset Active low 32 /RESET 33, 34 GND 35 USB-P I/O Differential USB positive line 36 USB-N I/O Differential USB negative line 37 V-USB Supply 3V3 USB power in 38 GPIO1 I/O CMOS/1V8 General Purpose I/O 39, 40 GND 41, 42 CHG_IN 43, 44 GND 45 SIM_RST 1V8 or 3V SIM card reset 46 SIM_CLK 1V8 or 3V SIM card clock 47 GPIO3 I/O CMOS/1V8 General purpose I/O 48 SIM_VCC 1V8 or 3V SIM power supply 49 GND 50 SIM_IO (SIM_DATA) Active low Ground Ground Supply Current source input for battery charging High current (1 A max) Ground Multiplexed with RTS2 and SIM_PRES Ground I/O CMOS/ 1V8 or 3V SIM card data confidential © Page : 17 / 42 This document is the sole and exclusive property of WAVECOM. Not to be distributed or divulged without prior written agreement. Ce document est la propriété exclusive de WAVECOM. Il ne peut être communiqué ou divulgué à des tiers sans son autorisation préalable. ERROR! REFERENCE SOURCE NOT FOUND.P5186 USER MANUAL V 1.0 Error! Reference source not found. 3.4 J102 connector J102 is a HE10 50-pin male connector. I/O I/O type Description Pin number Signal name 1, 2, 3, 4 GND 5V Supply Power supply 5V DVCC Supply RS232 interface Power supply 3V 7, 8 GND Ground Ground 9, 10 Not Connected 11, 12 GND 13 ROW4 Ground I/O CMOS 14 15 COL4 I/O CMOS ROW3 I/O CMOS COL3 I/O CMOS ROW2 I/O CMOS COL2 I/O CMOS ROW1 I/O CMOS COL1 I/O CMOS ROW0 I/O CMOS COL0 I/O CMOS Keyboard Column 0 Not Connected GND Ground 34 35 Keyboard Row 0 Not Connected 32 33 Keyboard Column 1 Not Connected 30 31 Keyboard Row 1 Not Connected 28 29 Keyboard Column 2 Not Connected 26 27 Keyboard Row 2 Not Connected 24 25 Keyboard Column 3 Not Connected 22 23 Keyboard Row 3 Not Connected 20 21 Keyboard Column 4 Not Connected 18 19 Keyboard Row 4 Not Connected 16 17 Comment Not Connected IO_AUDIO I/O CMOS 2V8 External audio function control Multiplexed with DAI_RST confidential © Page : 18 / 42 This document is the sole and exclusive property of WAVECOM. Not to be distributed or divulged without prior written agreement. Ce document est la propriété exclusive de WAVECOM. Il ne peut être communiqué ou divulgué à des tiers sans son autorisation préalable. ERROR! REFERENCE SOURCE NOT FOUND.P5186 USER MANUAL V 1.0 Error! Reference source not found. Pin number Signal name I/O I/O type 36 37, 38, Description Comment Not Connected GND Ground 39 40 /RESET I/O Schmitt Module RESET 41 DAI_CLK 2V8 DAI clock 104 kHz Multiplexed with PCM_CLK 42 PCM_OUT 2V8 PCM serial data Output Multiplexed with DAI_OUT 43 CODEC_8K 2V8 8 kHz PCM sample frame synchronization 44 PCM_IN CMOS 2V8 PCM serial data Input 45 TP1 Test Point TP1* 46 TP2 Test Point TP2* 47, 48, 49, 50 GND Ground Multiplexed with DAI_IN * refer to document [1] for further details. confidential © Page : 19 / 42 This document is the sole and exclusive property of WAVECOM. Not to be distributed or divulged without prior written agreement. Ce document est la propriété exclusive de WAVECOM. Il ne peut être communiqué ou divulgué à des tiers sans son autorisation préalable. ERROR! REFERENCE SOURCE NOT FOUND.P5186 USER MANUAL V 1.0 Error! Reference source not found. 3.5 J104 connector (SIM) J104 is a standard 1V8 or 3V SIM socket. The Table bellow gives the description of the signals of this connector. Pin number Signal name I/O I/O type Description Comment SIM_VCC 1V8 or 3V SIM card Power Supply SIM_RST 1V8 or 3V SIM card Reset SIM_CLK 1V8 or 3V SIM card Clock SIM_PRES CMOS 1V8 max.(*) SIM Card presence detect GND VPP SIM_DATA CC8 Multiplexed with GPIO3 and RTS2 Ground Not connected I/O CMOS/1V8-3V SIM card Data 1V8 digital supply (V-CORE) SIM_PRES signal supply (*) For either 1V8 or 3V SIM cards. 3.6 J200 connector (external power supply) J200 is the external power supply connector. It is a 2-pin male connector. The Table bellow gives the description of its signals. Pin number Signal name I/O I/O type Description VBATT Supply External supply 4.2 VDC max. GND Supply Ground confidential © Page : 20 / 42 This document is the sole and exclusive property of WAVECOM. Not to be distributed or divulged without prior written agreement. Ce document est la propriété exclusive de WAVECOM. Il ne peut être communiqué ou divulgué à des tiers sans son autorisation préalable. ERROR! REFERENCE SOURCE NOT FOUND.P5186 USER MANUAL V 1.0 Error! Reference source not found. 3.7 J201 connector (battery charger) J201 is used to simulate a charger. It is a 2-pin male connector. The Table bellow gives the description of its signals. Pin number Signal name I/O I/O type Description CHG_IN Current source 5V / 800 mA max. External Charger GND 3.8 J301 (Socket up) Pin number Signal name 1, 2 GND 3, 4, 5, 6, 7, 8 VBATT 9, 10 GND 11 AUX_ADC 12 GND 13 BAT_TEMP 14 GND 15 SPK_N 16 GND 17 SPK_P 18 GND 19 SPK_AUX_P 20 GND 21 Ground SPK_AUX_N 22 GND 23 MIC_N I/O I/O type Description Comment Ground I/O Supply Battery voltage Ground Analog Auxiliary ADC input Ground Analog ADC input for battery temperature measurement Ground Analog Main speaker negative output Ground Analog Main speaker positive output Ground Analog Auxiliary speaker positive output Ground Analog Auxiliary speaker negative output Ground Analog Main microphone negative input confidential © Page : 21 / 42 This document is the sole and exclusive property of WAVECOM. Not to be distributed or divulged without prior written agreement. Ce document est la propriété exclusive de WAVECOM. Il ne peut être communiqué ou divulgué à des tiers sans son autorisation préalable. ERROR! REFERENCE SOURCE NOT FOUND.P5186 USER MANUAL V 1.0 Error! Reference source not found. Pin number Signal name 24 GND 25 MIC_P 26 GND 27 MIC_AUX_P 28 GND 29 MIC_AUX_N 30 GND 31 VIBRATOR 32 GND 33 BAT_RTC I/O I/O type Description Comment Ground Analog Main microphone positive input Ground Analog Auxiliary microphone positive input Ground Analog Auxiliary microphone negative input Ground I/O Analog Supply Vibrator output Iout=80 mA max. Vout=2.8 V max. Ground Iout=2 mA max. Vout=2.5 V max. RTC back-up supply 34 GND 35 LED_OUT 36 GND 37 V-USB 38 GND 39 USB-P 40 GND 41 USB-N 42 GND 43 DTR1 44 GND 45 CTS1 46 GND 47 DSR1 48 GND 49 TXD1 Ground Open drain output External LED driving and battery charging indicator Ground Supply 3V3 USB power supply in Ground I/O Differential USB positive line Ground I/O Differential USB negative line Ground CMOS 2V8 Serial link UART1 Data Terminal Ready Multiplexed with SPI2_DATA and GPIO14 Ground 2V8 Serial link UART1 Clear To Send Multiplexed with GPO2 Ground 2V8 Serial link UART1 Data Set ready Multiplexed with SPI2_CLK and GPO4 Ground CMOS 2V8 Serial link UART1 transmit data Multiplexed with GPIO13 confidential © Page : 22 / 42 This document is the sole and exclusive property of WAVECOM. Not to be distributed or divulged without prior written agreement. Ce document est la propriété exclusive de WAVECOM. Il ne peut être communiqué ou divulgué à des tiers sans son autorisation préalable. ERROR! REFERENCE SOURCE NOT FOUND.P5186 USER MANUAL V 1.0 Error! Reference source not found. Pin number Signal name 50 GND 51 RXD1 52 GND 53 VCC 54 GND 55 RTS1 56 GND 57 GPIO12 58 GND 59 GPIO10 60 GND 61 GPIO11 62 GND 63 GPIO8 64 GND 65 GPIO9 66 GND 67 CODEC_8K 68 GND 69 DAI_CLK 70 GND 71 I/O I/O type Description Comment Ground 2V8 Serial link UART1 receive data Multiplexed with GPO3 Ground Supply Digital supply for external Iout=10 mA max. 2V8 digital devices Ground CMOS 2V8 Serial link UART1 Request To Send Multiplexed with GPIO15 Ground I/O CMOS/2V8 General Purpose I/O Multiplexed with SCI_RST Ground I/O CMOS/2V8 General Purpose I/O Multiplexed with SCI_CLK Ground I/O CMOS/2V8 General Purpose I/O Multiplexed with SCI_DATA Ground I/O CMOS/1V8 General Purpose I/O Multiplexed with SCI_PRES and EXTINT3 Ground I/O CMOS/2V8 General Purpose I/O Multiplexed with SCI_PWR Ground 2V8 8 kHz PCM sample frame synchronization 2V8 DAI clock 104 kHz Multiplexed with PCM_CLK PCM_IN CMOS 2V8 PCM serial data input Multiplexed with DAI_IN 72 GPIO4 I/O CMOS/1V8 General Purpose I/O Multiplexed with CLK32K 73 PCM_OUT 2V8 PCM serial data output Multiplexed with DAI_OUT 74 GPIO5 I/O CMOS/1V8 General Purpose I/O Multiplexed with USR0N d TXD2 Page : 23 / 42 confidential © This document is the sole and exclusive property of WAVECOM. Not to be distributed or divulged without prior written agreement. Ce document est la propriété exclusive de WAVECOM. Il ne peut être communiqué ou divulgué à des tiers sans son autorisation préalable. ERROR! REFERENCE SOURCE NOT FOUND.P5186 USER MANUAL V 1.0 Error! Reference source not found. Pin number Signal name I/O I/O type Description Comment USR0N and TXD2 75 IO_AUDIO I/O CMOS/2V8 External audio function control Multiplexed with DAI_RST 76 GPO0 CMOS 1V8 General Purpose O Multiplexed with CTS2 and PWM0 77 GPIO7 I/O CMOS/2V8 General Purpose I/O Multiplexed with SDA and SPI3_CLK 78 GPO1 CMOS 1V8 General Purpose O Multiplexed with RXD2 79 GPIO6 I/O CMOS/2V8 General Purpose I/O Multiplexed with SCL and SPI3_DATA 80 GND 3.9 Ground J302 (Socket up) Pin number Signal name 1, 2 GND 3, 4 V-CORE GND ON/∼OFF GND BUZ GND 10 /WR 11 GND 12 D15 13 GND 14 D11 15 GND 16 D14 17 GND 18 D12 19 GND 20 D13 I/O I/O type Description Comment Ground Supply Digital supply for external 50 mA max. 1V8 digital devices Ground CMOS Schmitt Power control Power ON when high Ground Open drain Buzzer output Iout = 100 mA max. Vout = 0.4 V max. Ground 1V8 Write operation Active low Ground I/O CMOS/1V8 Data bus 15 Ground I/O CMOS/1V8 Data bus 11 Ground I/O CMOS/1V8 Data bus 14 Ground I/O CMOS/1V8 Data bus 12 Ground I/O CMOS/1V8 Data bus 13 confidential © Page : 24 / 42 This document is the sole and exclusive property of WAVECOM. Not to be distributed or divulged without prior written agreement. Ce document est la propriété exclusive de WAVECOM. Il ne peut être communiqué ou divulgué à des tiers sans son autorisation préalable. ERROR! REFERENCE SOURCE NOT FOUND.P5186 USER MANUAL V 1.0 Error! Reference source not found. Pin number Signal name 21 GND 22 D10 23 GND 24 D09 25 GND 26 D07 27 GND 28 D04 29 GND 30 D05 31 GND 32 D03 33 GND 34 A03 35 GND 36 D06 37 GND 38 /RD 39 GND 40 D08 41 GND 42 A02 43 GND 44 D02 45 GND 46 D01 47 GND 48 D00 49 GND 50 LCDEN 51 GND 52 /RESET 53 GND I/O I/O type Description Comment Ground I/O CMOS/1V8 Data bus 10 Ground I/O CMOS/1V8 Data bus 9 Ground I/O CMOS/1V8 Data bus 7 Ground I/O CMOS/1V8 Data bus 4 Ground I/O CMOS/1V8 Data bus 5 Ground I/O CMOS/1V8 Data bus 3 Ground 1V8 Address bus 3 Ground I/O CMOS/1V8 Data bus 6 Ground 1V8 Read operation Active low Ground I/O CMOS/1V8 Data bus 8 Ground 1V8 Address bus 2 Ground I/O CMOS/1V8 Data bus 2 Ground I/O CMOS/1V8 Data bus 1 Ground I/O CMOS/1V8 Data bus 0 Ground 1V8 LCD Enable Active high multiplexed withGPIO0 Ground I/O Schmitt P5186 module reset Active low Ground confidential © Page : 25 / 42 This document is the sole and exclusive property of WAVECOM. Not to be distributed or divulged without prior written agreement. Ce document est la propriété exclusive de WAVECOM. Il ne peut être communiqué ou divulgué à des tiers sans son autorisation préalable. ERROR! REFERENCE SOURCE NOT FOUND.P5186 USER MANUAL V 1.0 Error! Reference source not found. Pin number Signal name I/O I/O type Description Comment 54 BOOT CMOS 1V8 Enable for flash downloading Multiplexed with GPIO2 55 GND 56 GPIO1 57 GND 58 CHG_IN 59 GND 60 CHG_IN 61 GND 62 SIM_CLK 63 GND 64 SIM_RST 65 GND 66 SIM_VCC 67 GND 68 GPIO3 69 GND 70 SIM_IO (SIM_DATA) I/O CMOS / 1V8 or 3V SIM card data 71 ROW0 I/O CMOS Keyboard row0 72 COL4 I/O CMOS Keyboard column4 73 ROW2 I/O CMOS Keyboard row2 74 COL2 I/O CMOS Keyboard column2 75 ROW3 I/O CMOS Keyboard row3 76 ROW4 I/O CMOS Keyboard row4 77 COL0 I/O CMOS Keyboard column0 78 ROW1 I/O CMOS Keyboard row1 79 COL1 I/O CMOS Keyboard column1 80 COL3 I/O CMOS Keyboard column3 Ground I/O CMOS/1V8 General Purpose I/O Ground Supply Current source input for battery charging 1 A max. Ground Supply Current source input for battery charging 1 A max. Ground 1V8 or 3V SIM card clock Ground 1V8 or 3V SIM card reset Ground 1V8 or 3V SIM card Power supply Ground I/O CMOS/1V8 General Purpose I/O Multiplexed with SIM_PRES and RTS2 Ground confidential © Page : 26 / 42 This document is the sole and exclusive property of WAVECOM. Not to be distributed or divulged without prior written agreement. Ce document est la propriété exclusive de WAVECOM. Il ne peut être communiqué ou divulgué à des tiers sans son autorisation préalable. ERROR! REFERENCE SOURCE NOT FOUND.P5186 USER MANUAL V 1.0 Error! Reference source not found. 3.10 J500 connector (Auxiliary audio) J500 is a RJ9 4-pin connector. The Table bellow gives the description of the signals of this connector. Pin number Signal name I/O I/O type Description MIC_AUX_N Analog Auxiliary microphone negative input SPK_AUX_P Analog Auxiliary speaker positive output SPK_AUX_N Analog Auxiliary speaker negative output MIC_AUX_P Analog Auxiliary microphone positive input confidential © Page : 27 / 42 This document is the sole and exclusive property of WAVECOM. Not to be distributed or divulged without prior written agreement. Ce document est la propriété exclusive de WAVECOM. Il ne peut être communiqué ou divulgué à des tiers sans son autorisation préalable. ERROR! REFERENCE SOURCE NOT FOUND.P5186 USER MANUAL V 1.0 Error! Reference source not found. 3.11 J501 connector (Main audio) J501 is a RJ9 4-pin connector. The Table bellow gives the description of the signals of this connector. Pin number Signal name I/O I/O type Description MIC_N Analog Main microphone negative input SPK_P Analog Main speaker positive output SPK_N Analog Main speaker negative output MIC_P Analog Main microphone positive input confidential © Page : 28 / 42 This document is the sole and exclusive property of WAVECOM. Not to be distributed or divulged without prior written agreement. Ce document est la propriété exclusive de WAVECOM. Il ne peut être communiqué ou divulgué à des tiers sans son autorisation préalable. ERROR! REFERENCE SOURCE NOT FOUND.P5186 USER MANUAL V 1.0 Error! Reference source not found. 3.12 J600 connector (RS232) J600 is a SUB-D 9-pin female connector. The Table bellow gives the description of the signals of this connector. Pin number Signal name I/O I/O type Description CT109 DCD(*) RS232 (V24/V28) Data Carrier Detect CT104 RXD RS232 (V24/V28) Receive serial data CT103 TXD RS232 (V24/V28) Transmit serial data CT108-2 DTR RS232 (V24/V28) Data Terminal Ready GND CT107 DSR RS232 (V24/V28) Data Set Ready CT105 RTS RS232 (V24/V28) Request To Send CT106 CTS RS232 (V24/V28) Clear To Send CT125 RI(*) RS232 (V24/V28) Ring Indicator Ground (*) optional signals Note: the Wismo Pac P5186 module starter kit is a DCE (Data Communication Equipment). It can be connected with a DTE (Data Terminal Equipment - PC or terminal) with a “straight cable”. Warning: When RI and DCD signals are used by the application, the resistors R606 and R607 (0 Ω resistors) must be placed on the mother board. A set of 0 Ω resistors is provided with the starter kit. confidential © Page : 29 / 42 This document is the sole and exclusive property of WAVECOM. Not to be distributed or divulged without prior written agreement. Ce document est la propriété exclusive de WAVECOM. Il ne peut être communiqué ou divulgué à des tiers sans son autorisation préalable. ERROR! REFERENCE SOURCE NOT FOUND.P5186 USER MANUAL V 1.0 Error! Reference source not found. 3.13 J700 connector (USB) J700 is a USB Series B receptacle. Pin number Signal name I/O I/O type Description VBUS Power supply + 5 VDC DM I/O Digital USB negative line DP I/O Digital USB positive line GND Shell Shielding Power supply Ground confidential © Page : 30 / 42 This document is the sole and exclusive property of WAVECOM. Not to be distributed or divulged without prior written agreement. Ce document est la propriété exclusive de WAVECOM. Il ne peut être communiqué ou divulgué à des tiers sans son autorisation préalable. ERROR! REFERENCE SOURCE NOT FOUND.P5186 USER MANUAL V 1.0 Error! Reference source not found. 4 Operating configuration The operating configuration is made using the SW200 switch. Jumper Function Position Configuration mode Description Normal Red DVCC* power supply consumption measurement DVCC supplied from J200 (VBATT) Measurement DVCC supplied from J201 (5V current source) Normal Charger input (CHG_IN) connected to J201 (5 V current source) Measurement Charger input (CHG_IN) disconnected RS232 Serial link transceiver shutdown management Normal Shutdown inactive shutdown SIM card presence management (SIM_PRES** signal) Modem SIM card presence is managed (SIM_PRES supplied by V-core) Mobile SIM card presence is not managed (SIM_PRES not supplied) Yellow Green Blue Charger input management Shutdown active * DVCC is an internal digital power supply (3 V typical) mainly used as the RS232 interface power supply. ** SIM_PRES: SIM card presence is detected via the GPIO3 of the WISMO module. The default configuration (called “modem configuration”) of the SW200 switch is 1, 3 , 5 and 7: Red jumper on position 1, Yellow jumper on position 3, Green jumper on position 5, Blue jumper on position 7. confidential © Page : 31 / 42 This document is the sole and exclusive property of WAVECOM. Not to be distributed or divulged without prior written agreement. Ce document est la propriété exclusive de WAVECOM. Il ne peut être communiqué ou divulgué à des tiers sans son autorisation préalable. ERROR! REFERENCE SOURCE NOT FOUND.P5186 USER MANUAL V 1.0 Error! Reference source not found. Consumption measurement configuration is given in the table below: SW200 positions Measurement on external supply input (J200) Measurement on charger input (J201) Normal mode 1 and 3 VBATT + DVCC CHG_IN VBATT DVCC Measurement mode 2 and 4 VBATT = WISMO module P5186 consumption. VDCC = RS232 interface consumption. CHG_IN = charging consumption. The RS232 transceiver shutdown function (SW200 positions 5 and 6) is used for serial link consumption measurement (DVCC) and test of the RS232 cable. confidential © Page : 32 / 42 This document is the sole and exclusive property of WAVECOM. Not to be distributed or divulged without prior written agreement. Ce document est la propriété exclusive de WAVECOM. Il ne peut être communiqué ou divulgué à des tiers sans son autorisation préalable. ERROR! REFERENCE SOURCE NOT FOUND.P5186 USER MANUAL V 1.0 Error! Reference source not found. 5 Functional description 5.1 Power supply J200 is the Power Supply connector of the WISMO module. The voltage applied to this connector is described hereafter. Minimum VBATT+ 5.2 Typical 3.3 V Maximum 4.2 V Charger function J201 is used to simulate a charger. The voltage applied to this connector is described hereafter. Minimum CHG_IN 4.8 V Typical Maximum 5.2 V Note: CHG_IN current = 800 mA max. 5.3 SIM function The SIM interface controls 3 V SIM cards. Note: in a future version of the starter kit, the use of 1.8 V SIM cards will be available. When the SIM_PRES signal is used by the application (detection of SIM card presence) then a jumper must be set on position 7 of the SW200 switch. When the SIM_PRES signal is not used by the application, then a jumper must be set on position 8 of the SW200 switch. confidential © Page : 33 / 42 This document is the sole and exclusive property of WAVECOM. Not to be distributed or divulged without prior written agreement. Ce document est la propriété exclusive de WAVECOM. Il ne peut être communiqué ou divulgué à des tiers sans son autorisation préalable. ERROR! REFERENCE SOURCE NOT FOUND.P5186 USER MANUAL V 1.0 Error! Reference source not found. 5.4 RS232 function 5.4.1 Introduction The Starter Kit is fitted with a MAX3238 RS232 transceiver device (U1). The Starter Kit acts as a DCE (Data Communication Equipment) and is connected to a DTE (Data Terminal Equipment - PC or terminal) with a “straight cable”. CT 1 0 3 / T X CT 1 0 4 / RX CT 1 0 5 / RT S DTE CT 1 0 6 / CT S CT 1 0 7 / D SR CT 1 0 8 - 2 / D T R CT 1 0 9 / D CD St a r t er Kit (D CE) CT 1 2 5 / RI Figure 1: RS232 serial link RS232 link default configuration is made of 6 wires: TX, RX, CTS, RTS, DTR and DSR. Warning: When RI and DCD signals are used by the application, the resistors R606 and R607 (0 Ω resistors) must be placed on the mother board. In the mother board default configuration, these resistors are not placed. So, a set of 0 Ω resistors is provided with the starter kit. When the SPI2 bus of the WISMO P5186 module is used, resistors R603 and R610 must be unsoldered and removed from the motherboard, because the SPI2 bus signals (SPI2_DATA and SPI2_CLK) are multiplexed with DSR1 and DTR1. In that case, the RS232 serial link will be make up of 4 wires only: TX, RX, CTS and RTS. The signal name relashionship between the WISMO Pac P5186 serial interface (V24/CMOS) and the RS232 interface (V24/V28) is given hereafter: Pin # I/O RS2332 signal P5186 signal DCD GPIO7 RXD TXD1 TXD RXD1 DTR DSR1 DSR DTR1 RTS CTS CTS RTS RI GPIO6 confidential © Page : 34 / 42 This document is the sole and exclusive property of WAVECOM. Not to be distributed or divulged without prior written agreement. Ce document est la propriété exclusive de WAVECOM. Il ne peut être communiqué ou divulgué à des tiers sans son autorisation préalable. ERROR! REFERENCE SOURCE NOT FOUND.P5186 USER MANUAL V 1.0 Error! Reference source not found. 5.4.2 Shutdown of Max3238 The Max3238 device can be shut down using the switch SW200: Position 5: shut down inactive, Position 6: shut down active. When the shut down is active, the MAX3238 device transmitters and receivers are disabled and their outputs go high impedance. The shutdown is used for measuring the serial link consumption and for testing the RS232 cable. 5.5 Audio functions When Auxiliary Audio interface is used on the mother board, the following jumpers must be connected between pin 2 an pin 3: JP500 and JP501: auxiliary speaker, JP502 and JP503: auxiliary microphone. When Main Audio interface is used on the mother board, the following jumpers must be connected between pin 2 and pin 3: JP504 and JP505: main speaker, JP506 and JP507: main microphone. 1 2 3 JP500 to JP507 5.6 ON/~OFF and BOOT function Mode BOOT ON/~OFF (SW202) (SW201) Normal OFF ON Download ON ON Note: internal boot is started when both switches SW202 (BOOT) and SW201 (ON/~OFF) are ON during the reset of the module (SW203). confidential © Page : 35 / 42 This document is the sole and exclusive property of WAVECOM. Not to be distributed or divulged without prior written agreement. Ce document est la propriété exclusive de WAVECOM. Il ne peut être communiqué ou divulgué à des tiers sans son autorisation préalable. ERROR! REFERENCE SOURCE NOT FOUND.P5186 USER MANUAL V 1.0 Error! Reference source not found. 5.7 RESET function When SW203 is pressed (RESET button), the WISMO module is reset. 5.8 KEYPAD function The following table shows the matrix of the keyboard: COL0 COL1 COL2 COL3 COL4 ROW0 SW400 SW405 SW410 SW415 SW420 ROW1 SW401 SW406 SW411 SW416 SW421 ROW2 SW402 SW407 SW412 SW417 SW422 ROW3 SW403 SW408 SW413 SW418 SW423 ROW4 SW404 SW409 SW414 SW419 SW424 Example: If you press the key SW412, an electric detection will be made on ROW2 and COL2. 5.9 Antenna function The antenna is connected to the board via the SMA300 connector. The antenna cable is fitted with a FME connector and a SMA/FME adaptator is supplied to permit the connection to the board. 5.10 ESD protections External ESD protections are added on the mother board for the following signals: WISMO Pac P5186 VBATT and CHG_IN input signals. WISMO Pac P5186 /RESET and BOOT input signals. WISMO Pac P5186 SIM interface signals: SIM_PRES, SIM_VCC, SIM_IO, SIM_CLK, SIM_RST, WISMO Pac P5186 Serial link signals (UART1): TXD1, RTS1, DTR1, DSR1, RXD1, CTS1, RI1 (GPIO6) and DCD1 (GPIO7). Main audio interface signals. Auxiliary audio interface signals. confidential © Page : 36 / 42 This document is the sole and exclusive property of WAVECOM. Not to be distributed or divulged without prior written agreement. Ce document est la propriété exclusive de WAVECOM. Il ne peut être communiqué ou divulgué à des tiers sans son autorisation préalable. ERROR! REFERENCE SOURCE NOT FOUND.P5186 USER MANUAL V 1.0 Error! Reference source not found. 6 Getting started 6.1 Procedure Make sure that both the “ON/OFF” switch (SW201) and “BOOT” switch (SW202) are on position “OFF”. Put the operating configuration switch (SW200) in default configuration position: Red jumper on position 1, Yellow jumper on position 3, Green jumper on position 5, Blue jumper on position 7. Make sure that the jumpers JP500 to JP507 are connected between pin 2 and pin 3 (Main audio interface and auxiliary audio interface). Make sure that the external DC power supply is switched off and connect it to J200 (VBATT) using the power supply cable provided with the starter kit. Connect the RS232 cable, provided with the starter kit, between port COM1 (or COM2) of the PC and J600 of the board. The COM port properties must be the following: Bits per second: 115.200 k, Data bits: 8, Parity: None, Stop bits: 2, Flow control: None. Connect the antenna to the SMA300 connector (if communications are required). Connect the handset, provided with the starter kit, to the Main Audio connector J500 (if communications are required). Insert a SIM card into the SIM card holder (if communications are required). Switch on the external power supply then adjust: the output voltage to 4 Volts DC, the current limitation to 2 A min. Switch “ON” the “ON/OFF” switch (SW201) of the board then check there is a consumption on the external power supply amperemeter. On the PC, open a terminal emulator window to communicate with the WISMO module via the COM1 (or COM2) port. Press the “RESET” key (SW203) to reset the WISMO module. Using the terminal emulator, send the following command on COM port to communicate with the WISMO module: AT↵. When the communication is established between the PC and the WISMO module, the last one sends the message “OK” as a reply. This message is displayed in the terminal emulator window. confidential © Page : 37 / 42 This document is the sole and exclusive property of WAVECOM. Not to be distributed or divulged without prior written agreement. Ce document est la propriété exclusive de WAVECOM. Il ne peut être communiqué ou divulgué à des tiers sans son autorisation préalable. ERROR! REFERENCE SOURCE NOT FOUND.P5186 USER MANUAL V 1.0 Error! Reference source not found. 6.2 Trouble shooting If I=0 on the external power supply amperemeter, then: Check that the external power supply: Is “ON”. is connected on J200. is adjusted for an output voltage between 3.2 V and 4.2 V. Check that the “ON/OFF” switch (SW201) is “ON”. Check the fuse F1 (3 A) and replace it if necessary. Note: technical characteristics of the fuse to be replaced are given in appendix. Check the configuration of the jumpers on switch SW200. If the WISMO module does not reply to the “AT↵” command (no message “OK” is received), make sure that: 6.3 6.3.1 6.3.1.1 The WISMO module is present on the mother board (socket up mounted). a software has been loaded in the module (refer to the documentation [3]). Safety, FCC and Industry of Canada Regulatory compliance RF safety General Your GSM terminal1 is based on the GSM standard for cellular technology. The GSM standard is spread all over the world. It covers Europe, Asia and some parts of America and Africa. This is the most used telecommunication standard. Your GSM terminal is actually a low power radio transmitter and receiver. It sends out and receives radio frequency energy. When you use your GSM application, the cellular system which handles your calls controls both the radio frequency and the power level of your cellular modem. 6.3.1.2 Exposure to RF energy There has been some public concern about possible health effects of using GSM terminals. Although research on health effects from RF energy has focused on the current RF technology for many years, scientists have begun research regarding newer radio technologies, such as GSM. After existing research had been reviewed, and after compliance to all applicable safety standards had been tested, it has been concluded that the product was fitted for use. If you are concerned about exposure to RF energy there are things you can do to minimize exposure. Obviously, limiting the duration of your calls will reduce your exposure to RF energy. In addition, you can reduce RF exposure by operating your cellular terminal efficiently by following the below guidelines. based on WISMO2D confidential © Page : 38 / 42 This document is the sole and exclusive property of WAVECOM. Not to be distributed or divulged without prior written agreement. Ce document est la propriété exclusive de WAVECOM. Il ne peut être communiqué ou divulgué à des tiers sans son autorisation préalable. ERROR! REFERENCE SOURCE NOT FOUND.P5186 USER MANUAL V 1.0 Error! Reference source not found. 6.3.1.3 Efficient terminal operation For your GSM terminal to operate at the lowest power level, consistent with satisfactory call quality: • If your terminal has an extendible antenna, extend it fully. Some models allow you to place a call with the antenna retracted. However your GSM terminal operates more efficiently with the antenna fully extended. • Do not hold the antenna when the terminal is « IN USE ». Holding the antenna affects call quality and may cause the modem to operate at a higher power level than needed. 6.3.2 Modular Transmitter Modular transmitter. This device is to be used only for mobile and fixed applications. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. The antenna(s) used for this transmitter must not exceed a gain of 3 dBi for mobile operation and 7 dBi for fixed operation. Users and OEM integrators must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. OEM must also be provided with labelling instructions. This device contains 900 MHz GSM functions that are not operational in U.S. Territories. This filing is only applicable for GSM 850 MHz and 1900 MHz PCS operations. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Your mobile device is a low power radio transmitter and receiver. When it is ON, it receives and also sends out radio frequency (RF) signals. In August 1996, the Federal Communications Commission (FCC) adopted RF exposure guidelines with safety levels for mobile device. Those guidelines are consistent with safety standards previously set by both U.S. and international standards bodies: American National Standard Institute (ANSI), National Council of Radiation Protection and Measurements (NCRP), and International Commission on Non-Ionizing Radiation Protection (ICNRP). Those standards were based on comprehensive and periodic evaluations of the relevant scientific literature. The design of your Module complies with the FCC guidelines and applicable WARNING: Unauthorized antennas, modifications, or attachments could impair call quality, damage the Module, or result in violation of FCC regulations. Do not use the Module with a damaged antenna. Please contact your local authorized dealer for antenna replacement. Important! Read these safety guidelines prior to using your Module. Failure to follow these rules and guidelines may be dangerous and/or illegal. 6.3.3 Road Safety Information Do not use a hand-held Module while driving a vehicle. Talking on the Module while driving is dangerous and illegal in some locations. If using a hand-held Module, park the vehicle before conversing. Remember – road safety always comes first! confidential © Page : 39 / 42 This document is the sole and exclusive property of WAVECOM. Not to be distributed or divulged without prior written agreement. Ce document est la propriété exclusive de WAVECOM. Il ne peut être communiqué ou divulgué à des tiers sans son autorisation préalable. ERROR! REFERENCE SOURCE NOT FOUND.P5186 USER MANUAL V 1.0 Error! Reference source not found. 6.3.4 Aircraft Safety Information Power down your Module prior to boarding an aircraft. Sending and receiving calls on your Module on an aircraft is prohibited by law and aviation regulations. Using a wireless Module in an aircraft may interfere with aircraft radio communication or navigation equipment, and disrupt the wireless Module network. When boarding an aircraft, turn your Module OFF. 6.3.5 Hospital & Medical Safety Information Power down your Module prior to entering hospitals, health care facilities, or when near medical equipment. Operating any radio transmitting equipment, including digital wireless Modules, may interfere with RFsensitive medical devices. Follow all posted regulations while in hospitals and health care facilities regarding the use of your Module. 6.3.6 Blasting and Refueling Safety Information Do not use your Module near a blasting site. Power down your Module when in any area with a potentially explosive Atmosphere. Radio transmissions in such areas could cause an explosion or fire, resulting in bodily injury or even death. Obey all posted signs and instructions regarding the use of wireless Module usage. Observe restrictions on the use of radio equipment in fuel depots (fuel storage and distribution areas), chemical plants or where blasting operations are in progress. 6.3.7 Interference Safety Information All mobile Modules are subject to radio frequency interference that may affect the performance of your Module. Your digital wireless Module is a low power radio transmitter and receiver. The design of your Module complies with the FCC guidelines and applicable standards. Never rely solely on your Module for essential communications (e.g., medical emergencies). You must be in a service area with adequate signal strength to use the Module. Emergency calls may not be possible on all wireless Module networks or when certain network services and/or Module features are in use. Check with your local service provider(s). 6.3.8 Service Safety Information Only qualified service personnel are authorized to repair your digital wireless Module and equipment. Use only approved accessories. Contact you sales representative authorized service centers. FCC RF EXPOSURE INFORMATION In August 1996 the Federal Communications Commission (FCC) of the United States with its action in Report and Order FCC 96-326 adopted an updated safety standard for human exposure to radio frequency electromagnetic energy emitted by FCC regulated transmitters. Those guidelines are consistent with the safety standard previously set by both U.S. and international standards bodies. The design of this phone complies with the FCC guidelines and these international standards. For more information about RF exposure, please visit the FCC website at www.fcc.gov confidential © Page : 40 / 42 This document is the sole and exclusive property of WAVECOM. Not to be distributed or divulged without prior written agreement. Ce document est la propriété exclusive de WAVECOM. Il ne peut être communiqué ou divulgué à des tiers sans son autorisation préalable. ERROR! REFERENCE SOURCE NOT FOUND.P5186 USER MANUAL V 1.0 Error! Reference source not found. 6.3.9 Federal Communications Commission (FCC) Notice This equipment has been tested and found to comply with the limits for a class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy. If not installed and used in accordance with the instructions, it may cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on. The user is encouraged to try to correct the interference by one or more of the following measures: • Reorient or relocate the receiving antenna. • Increase the distance between the equipment and the receiver. • Connect the equipment to an outlet on a circuit different from the outlet where the receiver is connected. • Consult the dealer or an experienced radio/TV technician for assistance confidential © Page : 41 / 42 This document is the sole and exclusive property of WAVECOM. Not to be distributed or divulged without prior written agreement. Ce document est la propriété exclusive de WAVECOM. Il ne peut être communiqué ou divulgué à des tiers sans son autorisation préalable. ERROR! REFERENCE SOURCE NOT FOUND.P5186 USER MANUAL V 1.0 Error! Reference source not found. Appendix confidential © Page : 42 / 42 This document is the sole and exclusive property of WAVECOM. Not to be distributed or divulged without prior written agreement. Ce document est la propriété exclusive de WAVECOM. Il ne peut être communiqué ou divulgué à des tiers sans son autorisation préalable.
Source Exif Data:
File Type : PDF File Type Extension : pdf MIME Type : application/pdf PDF Version : 1.3 Linearized : No Modify Date : 2003:10:23 18:24:05-06:00 Subject : WISMO3-3 Pin Out Create Date : 2003:10:23 18:20:24-07:00 Page Count : 42 Creation Date : 2003:10:24 01:20:24Z Mod Date : 2003:10:24 01:20:24Z Producer : Acrobat Distiller 5.0.5 (Windows) Author : Frédéric TOMASI Metadata Date : 2003:10:24 01:20:24Z Creator : Frédéric TOMASI Title : WM_PRJ_WM3-3_PTS_005_001 Description : WISMO3-3 Pin Out Page Mode : UseNone Tagged PDF : YesEXIF Metadata provided by EXIF.tools