Sierra Wireless Q2438F-M TRI MODE CDMA WIRELESS MODULE KIT User Manual GRS SPEC 081021

Sierra Wireless, Inc. TRI MODE CDMA WIRELESS MODULE KIT GRS SPEC 081021

UserManual.wiki >

Sierra Wireless >

Q2438F-M User Manual >

Contents

Manual 2

DRAFT Appendix B P/N 7010-0752 1 Specifications This TPS product is a 50-channel GPS receiver integrated with an internal computer and Windows Mobile6.0 operating system with touch screen, a digital camera, a Bluetooth® wireless technology module, celler module(option),an electronic compass, and an SD card slot. The portable design and product integration allows this device to be a fully-functional, productive tool at any job. Performance specifications assume a minimum of 6 GPS satellites above 15 degrees in elevation and adherence to the procedures recommended in this manual. In areas of high multipath, during periods of large PDOP, and during periods of increased ionospheric activity, performance may degrade. Use robust checking procedures in areas of extreme multipath or under dense foliage.

Specifications GRS Operator’s Manual 2 GRS Specifications The following sections provide specifications for the GRS and its internal components. General Details GRS General Specifications table lists the receiver’s general specifications. Table B-1. GRS General Specifications Physical Enclosure ABS Color Topcon Yellow and Topcon Grey Dimensions D: 213 x W: 93 x H: 46mm Weight 0.77 kg Antenna Internal Battery Internal, rechargeable/replaceable Backup, replaceable Controller Integrated; uses Windows Mobile 6.0 operating system Keys (buttons) Three keys: Power – On/Off ENT – applies settings, numerical values, and records points; shows Windows Start menu ESC – exits from the current screen or function LEDs Three LEDs: Bluetooth – indicates Bluetooth wireless technology connection status Power – indicates charge level Cell Phone modem-connection status Environment Operating temperature -20 C° to +50 C° with batteries -10 C° to +50 C° using camera Storage temperature -30 C° to +60 C° with batteries Waterproof IP66 at closing all connector caps. Power Internal battery Li-ion, 2500 mAh, 7.4 V ; repeatable

P/N 7010-0752 3 Operating time (Back light OFF, L1 GPS mode) No less than 3.5 hours with GPS and cell phone use. No less than 5 hours with GPS use. No less than 8 hours without GPS and cell phone. Supply from Holder (without Radio modem operates) No less than 10 hours with GPS and cell phone use. External power 1 port Contact Pin: From the battery Holder. Input voltage 12 V DC (for charge battery) Consumption 5.3W while in simultaneous use of WM, GPS and GSM Battery charger Connect the AC adaptor to charge the power port. Available run charge when connected to a portable external power source. Charging time 5 hours for full charge. (Use standard accessory AC/DC adaptor) On-board Backup battery for timekeeping; replaceable button-type battery; 8–10 years normal operation Connectors and Slot Serial port 1 port for communication with the GMS+ board (port A); small connector USB port 1 port for Windows CE; type B mini ver 1.1; connect to PC using ActiveSync External power port 1 port; DC Jack type A; for connecting the AC adaptor or external battery External antenna connector Lemo FLS.00.250 connector 3VDC output to external antenna SD card slot 1 slot for memory storage and I/O Contact Pins (To Holder and Cable) These are contact 12 pins on the back of GRS. TX, RX, RTS, CTS (GPS port-D), PPS, EVENT, LoBAT, HolderDetc, GMSXDetec, PW, GND, Spare GPS board Port-D: 232C level Bound rate: 460800, 230400, 115200(Default), 57600, 38400, 19200, 9600, 4800, 2400, 1200, 600, 300 Length: 7,8(Default) Stop bit: 1(Default), 2 Parity: None (Default), Odd, Even Power Pin (For only Radio/Battery holder.)

P/N 7010-0752 5 Speaker Mono Microphone Mono Memory Internal memory ＤＤＲ２ SDRAM 256MB External memory Via SD card slot GPS Details GPS Board Specifications lists the GPS board’s general specifications. Table B-2. GPS Board Specifications Tracking Specifications Tracked Signals GPS/GLONASS L1/L2 C/A Code & Carrier, GPS L2C SBAS (WAAS/EGNOS/MSAS) Receiver Type G - GPS L1 GD – GPS L1/L2 GGD - GPS/GLONASS L1/L2 Standard Channels 72 channels Cold Start Warm Start Reacquisition < 30 sec < 10 sec < 1 sec Survey Accuracy Static L1 (1Sigma) H: 3mm + 0.8ppm (x baseline length) V: 4mm + 1.0ppm (x baseline length) L1+L2: H: 3mm + 0.5ppm (x baseline length) V: 5mm + 0.5ppm (x baseline length) PP Kinematic L1: (1Sigma) H: 10mm + 1ppm (x baseline length) V: 15mm + 1ppm (x baseline length) DGPS Real time/Post processing: 0.5m (1Sigma) RTK (1Sigma) H: 10mm + 1ppm V: 15mm + 1ppm

Specifications GRS Operator’s Manual 6 Other (GPS) Real time data format RTCM 2.3, 3.0; CMR, CMR+; TPS NMEA NMEA 2.2, 2.3, 3.0 Output rate Up to 10Hz Connector Specifications The GRS has one antenna connector for radio transmission/reception and three port connectors for power and data upload/download. Serial Connector The serial connector (Serial RS23) is a sealed receptacle, 5 pin, port. This connector is configured as port A of the internal GPS receiver. Figure B-1. Serial RS232 Connector Serial Pin Specifications gives the serial port’s pin specifications. Table B-3. Serial Pin Specifications Number Signal Name Dir Details 1 TXD O Clear to send 2 RXD I Request to send 3 GND - Signal ground 4 GND - Signal ground 5 Not used

P/N 7010-0752 7 USB Connector Rimmed in yellow, the USB connector is a sealed receptacle, 4 pin TPS cable connector (USB Connector ). Figure B-2. USB Connector for GGD Options USB Specifications gives the USB connector specifications. Table B-4. USB Specifications Number Signal Name Dir Details 1 VDD P Bus power input 2 V- I/O Data minus 3 V+ I/O Data plus 4 Not used GND - Ground

Navigation menu