Sierra Wireless Q2438F-M TRI MODE CDMA WIRELESS MODULE KIT User Manual GRS SPEC 081021
Sierra Wireless, Inc. TRI MODE CDMA WIRELESS MODULE KIT GRS SPEC 081021
Contents
- 1. USERS MANUAL
- 2. Manual 1
- 3. Manual 2
- 4. Manual 3
Manual 2
DRAFT Appendix B Specifications This TPS product is a 50-channel GPS receiver integrated with an internal computer and Windows Mobile6.0 operating system with touch screen, a digital camera, a Bluetooth® wireless technology module, celler module(option),an electronic compass, and an SD card slot. The portable design and product integration allows this device to be a fully-functional, productive tool at any job. Performance specifications assume a minimum of 6 GPS satellites above 15 degrees in elevation and adherence to the procedures recommended in this manual. In areas of high multipath, during periods of large PDOP, and during periods of increased ionospheric activity, performance may degrade. Use robust checking procedures in areas of extreme multipath or under dense foliage. P/N 7010-0752 Specifications GRS Specifications The following sections provide specifications for the GRS and its internal components. General Details GRS General Specifications table lists the receiver’s general specifications. Table B-1. GRS General Specifications Physical Enclosure ABS Color Topcon Yellow and Topcon Grey Dimensions D: 213 x W: 93 x H: 46mm Weight 0.77 kg Antenna Internal Battery Internal, rechargeable/replaceable Backup, replaceable Controller Integrated; uses Windows Mobile 6.0 operating system Keys (buttons) Three keys: Power – On/Off ENT – applies settings, numerical values, and records points; shows Windows Start menu ESC – exits from the current screen or function LEDs Three LEDs: Bluetooth – indicates Bluetooth wireless technology connection status Power – indicates charge level Cell Phone modem-connection status Environment Operating temperature -20 C° to +50 C° with batteries -10 C° to +50 C° using camera Storage temperature -30 C° to +60 C° with batteries Waterproof IP66 at closing all connector caps. Power Internal battery Li-ion, 2500 mAh, 7.4 V ; repeatable GRS Operator’s Manual Operating time (Back light OFF, L1 GPS mode) No less than 3.5 hours with GPS and cell phone use. No less than 5 hours with GPS use. No less than 8 hours without GPS and cell phone. Supply from Holder (without Radio modem operates) No less than 10 hours with GPS and cell phone use. External power 1 port Contact Pin: From the battery Holder. Input voltage 12 V DC (for charge battery) Consumption 5.3W while in simultaneous use of WM, GPS and GSM Battery charger Connect the AC adaptor to charge the power port. Available run charge when connected to a portable external power source. Charging time 5 hours for full charge. (Use standard accessory AC/DC adaptor) On-board Backup battery for timekeeping; replaceable button-type battery; 8–10 years normal operation Connectors and Slot Serial port 1 port for communication with the GMS+ board (port A); small connector USB port 1 port for Windows CE; type B mini ver 1.1; connect to PC using ActiveSync External power port 1 port; DC Jack type A; for connecting the AC adaptor or external battery External antenna connector Lemo FLS.00.250 connector SD card slot 1 slot for memory storage and I/O Contact Pins These are contact 12 pins on the back of GRS. (To Holder and Cable) TX, RX, RTS, CTS (GPS port-D), PPS, EVENT, LoBAT, HolderDetc, GMSXDetec, PW, GND, Spare 3VDC output to external antenna GPS board Port-D: 232C level Bound rate: 460800, 230400, 115200(Default), 57600, 38400, 19200, 9600, 4800, 2400, 1200, 600, 300 Length: 7,8(Default) Stop bit: 1(Default), 2 Parity: None (Default), Odd, Even Power Pin (For only Radio/Battery holder.) P/N 7010-0752 Specifications Communication Serial port Port A of GPS+ board Baud rate = 460800, 230400, 115200, 2400, 1200, 600, 300 Flow control = RTC/CTS Length= 7, 8 (default) Stop bit= 1 (default, 2 Parity= None (default), Odd, Even Bluetooth Version: Bluetooth standard 1.2; Class 2; Profile: SPP, DUP Multiple connection capability (4 ports) Wireless LAN 802.11b/g USB Version 1.1 Windows Mobile6.0 Processor Intel PXA320 Processor speed 806MHz Operating System Microsoft Windows Mobile 6.0 Digital Camera Pixel 2.0M (UXGA...1600x1200) Sensor element 1/4 inches color C-MOS sensor Compass Type Magnet resistive sensor Accuracy ±10 divisions LCD Display Size 640x480 VGA (portrait) 3.7 inch color TFT transmissive type Backlight LED Touch screen Resistive touch screen; passive Audio GRS Operator’s Manual Speaker Mono Microphone Mono Memory Internal memory DDR2 External memory Via SD card slot SDRAM 256MB GPS Details GPS Board Specifications lists the GPS board’s general specifications. Table B-2. GPS Board Specifications Tracking Specifications Tracked Signals GPS/GLONASS L1/L2 C/A Code & Carrier, GPS L2C SBAS (WAAS/EGNOS/MSAS) Receiver Type G - GPS L1 GD – GPS L1/L2 GGD - GPS/GLONASS L1/L2 Standard Channels 72 channels Cold Start Warm Start Reacquisition < 30 sec < 10 sec < 1 sec Survey Accuracy Static L1 (1Sigma) H: 3mm + 0.8ppm V: 4mm + 1.0ppm L1+L2: H: 3mm + 0.5ppm V: 5mm + 0.5ppm (x baseline length) (x baseline length) (x baseline length) (x baseline length) PP Kinematic L1: (1Sigma) H: 10mm + 1ppm (x baseline length) V: 15mm + 1ppm (x baseline length) DGPS Real time/Post processing: 0.5m (1Sigma) RTK (1Sigma) H: 10mm + 1ppm V: 15mm + 1ppm P/N 7010-0752 Specifications Other (GPS) Real time data format RTCM 2.3, 3.0; CMR, CMR+; TPS NMEA NMEA 2.2, 2.3, 3.0 Output rate Up to 10Hz Connector Specifications The GRS has one antenna connector for radio transmission/reception and three port connectors for power and data upload/download. Serial Connector The serial connector (Serial RS23) is a sealed receptacle, 5 pin, port. This connector is configured as port A of the internal GPS receiver. Figure B-1. Serial RS232 Connector Serial Pin Specifications gives the serial port’s pin specifications. Table B-3. Serial Pin Specifications Number Signal Name Dir Details TXD Clear to send RXD Request to send GND Signal ground GND Signal ground Not used GRS Operator’s Manual USB Connector Rimmed in yellow, the USB connector is a sealed receptacle, 4 pin TPS cable connector (USB Connector ). Figure B-2. USB Connector for GGD Options USB Specifications gives the USB connector specifications. Table B-4. USB Specifications Number Signal Name Dir Details VDD Bus power input V- I/O Data minus V+ I/O Data plus Not used GND Ground P/N 7010-0752
Source Exif Data:
File Type : PDF File Type Extension : pdf MIME Type : application/pdf PDF Version : 1.4 Linearized : No XMP Toolkit : 3.1-701 Producer : Acrobat Distiller 7.0.5 (Windows) Create Date : 2008:11:17 15:28:14+09:00 Creator Tool : PScript5.dll Version 5.2.2 Modify Date : 2008:11:17 15:28:14+09:00 Format : application/pdf Title : Microsoft Word - GRS_SPEC_081021.doc Creator : Administrator Document ID : uuid:7954b5ac-9539-4dbc-8923-328ade2ad877 Instance ID : uuid:d48a4907-6296-4533-8677-7db7b3778edc Page Count : 7 Author : AdministratorEXIF Metadata provided by EXIF.tools