Signify North America SNH200 Luminaire mounted Light Sensor with 2.4GHz radio User Manual PLt 17265QG EasySense SNH200 QIG indd

Philips Lighting North America Corporation Luminaire mounted Light Sensor with 2.4GHz radio PLt 17265QG EasySense SNH200 QIG indd

PLt-17265QG_EasySense SNH200 QIG

Philips EasySense Outboard-Mount for High BayQuick Installation GuideSensorsEasySenseOutboard-Mount for High BayCommercial Product Name Order CodeEasySense Outboard-Mount for High BaySNH200Sensor part numberCompatible LED drivers© 2018 Philips Lighting Holding B.V. All rights reserved. Philips reserves the right to make changes in speci cations and/or to discontinue any product at any time without notice or obligation and will not be liable for any consequences resulting from the use of this publication.philips.com/easysensePhilips Lighting North America Corporation10275 W. Higgins Road, Rosemont IL 60018Tel: 800-322-2086 Fax: 888-423-1882Customer/Technical Service: 800-372-3331OEM Support: 866-915-5886Philips Lighting Canada Ltd.281 Hillmount Rd, Markham, ON, Canada L6C 2S3Tel. 800-668-9008PLt-17265QG_EasySense SNH200 QIG 04/18 Document #: 4422-107-07551 sh460 2018-04-12 PLt-17265QG_EasySense SNH200 QIG 04/18 Document #: 4422-107-07551 sh460 2018-04-12 Driver Model Number DescriptionXI040C110V054VPT1 Xitanium 40W 0.1-1.1A 27-54V 120-277V SRXI075C200V054VPT1 Xitanium 75W 0.1-2.0A 27-54V 120-277V SRXI075C070V118VSY1 Xitanium 75W 0.07-0.70A 43-118V 120-277V SR with AUXXI075C105V079VSY1 Xitanium 75W 0.105-1.05A 32-79V 120-277V SR with AUXXI095C275V054VPF1 Xitanium 95W 0.03-2.75A 27-54V 120-277V SRXI095C275V054VSF1 Xitanium 95W 0.03-2.75A 27-54V 120-277V SR with AUXXI150C070V235VSF1 Xitanium 150W 0.07-0.70A 78-235V 120-277V SR with AUXXI150C105V157VSF1 Xitanium 150W 0.105-1.05A 44-157V 120-277V SR with AUXSpeci cations available at www.philips.com/xitaniumsr/na.Wiring requirementsXITANIUM SR LED DRIVEREASYSENSE LED+LED+LED-LED-RSET2SGNDNFC ANTENNASR-Connectors SR+SRSRLINENEUTRALGROUND NC(2) 18AWG wires, non-polarizedOverall length 60cmStrip length 8mmNote: Above depicts connecting wires from sensor to Xitanium SR drivers that include connectors. For connection to Xitanium SR drivers that include leads, use wirenuts suitable for 18AWG solid wire. Wire to wire connection SNH200 includes 18AWG wires, 60cm in length with 8mm strip length. A wire to wire connection can be made with connectors or wirenuts suitable for 18AWG solid wire.The wire strip length in case of a wire to wire connection is connector dependent. Wire to driver connection A connection between the sensor and the driver should be made according to local practices. The SR input wires of the EasySense for High Bay are not polarized for  xtures using one driver and one sensor, and therefore can be connected, without taking care of polarity, to the SR output of the driver – SR+ and SR- terminals. It is recommended to keep wire distance from sensor to driver less than 50 feet. Polarity must be maintained when connecting multiple drivers to one sensor.The wire strip length in case of sensor to driver connection is ~8mm.
Sensor Dimensions, mm [in]1.53014-00.5+M20x1.51 15 -01+Ø43-01+866360 21 .540Optional view shield (included). Refer to design-in guide for details on coverage patterns when using view shield.1 43.8 [ 521 32 ]115-01+41732-00+[]1 .5 [ 11 6]43.25-01+14564-00+[]60 [ 238]40 [158]1 8.5 [ 34]30.1 [1316]63 [ 212]15.7 [58] [ 1 /2"] Straight pipe threadØØMounting in a LuminaireEasySense for High Bay is intended to be mounted to a standard ½" knockout available on the luminaire itself or a junction box. A washer and locknut are included with the sensor for this purpose. An OEM can develop custom brackets to attach to the top surface of the sensor in case the sensor needs to be mounted to a curved/non-flat surface. Mounting screws are provided with the sensor for this purpose. These screws are matched to the thickness of the plastic sensor housing. In case other screws are used, ensure that they do not protrude through the sensor plastics. Also make sure that the view of the sensor is not blocked anywhere by the luminaire or the bracket to avoid loss of functionality. Occupancy Sensing Coverage PatternBased on 16m mounting heightDaylight SensorThe light sensor measures the total amount of light in a circular  eld of ≈80% of the PIR detection area. The following aspects should be observed during installation:• Minimum distance from the window ≥ 2.0'/0.6m.• Prevent light re ections from outside entering the sensor (for example sunlight re ection on a car bonnet) as this will lead to incorrect light regulation.As a guideline the formula 0.72 x H can be used to calculate the minimum distance between the window and sensor whereby H is the height from the bottom of the window to the ceiling.Note: Restrictions only for daylight regulation. No restrictions for skylights.WindowWallSensor height with respect to windowSensor distance to windowFloorSNH200Photosensor spatial responseMinimum distance versus mounting heightMinimum distance versus mounting heightCon guration via Mobile App Note: Use of IR requires a speci c IR dongle from Philips to con gure and group from  oor level. Consult your Philips representative.EasySense parameters can be con gured via Philips  eld apps available for Android phones. Two options are available:1. EasySense NFC – This app allows con guring EasySense parameters only when you can physically access the sensor with a smartphone.2. EasySense Industry IR – This app allows con guring EasySense paramters plus enables grouping to a wireless switch, which can be done with an Android phone and a speci c IR dongle from Philips.You must  rst register for Philips  eld apps to receive a username and password, then download Philips  eld apps from the Google Play Store. Refer to www.philips.com/easysense for details, including applicable Android phones and user manuals.FCC and IC Statement This device complies with part 15 of the FCC rules for the United States and Industry Canada (IC) license-exempt RSS standard(s). Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Any changes or modi cations not expressly approved by Philips could void the user’s authority to operate thisequipment. This product is intended for commercial use only.This equipment should be installed and operated with a minimum distance of 20cm between the radiator and your body.Déclaration De Conformité À La Fcc/Ic Ce dispositif est conforme à la partie 15 des règles de la Federal Communications Commission (FCC) des États-Unis et d’Industrie Canada (IC) exempts de licence RSS norme(s). Son fonctionnement est assujetti aux deux conditions suivantes : (1) Ce dispositif ne doit pas provoquer de brouillage préjudiciable, et (2) il doit accepter tout brouillage reçu, y compris le brouillage pouvant entraîner un mauvais fonctionnement. Tous les changements ou modi cations non expressément approuvés par Philips, sont susceptibles d’annuler le droit de l’utilisateur à se servir de cet équipement. Ce produit est exclusivement destiné à un usage commercial.Cet équipement doit être installé et utilisé avec une distance minimale de 20 cm entre le radiateur et votre corps.

Navigation menu