Silex Technology SXDS3000WAN SX-DS-3000WAN User Manual Manual

Silex Technology, Inc. SX-DS-3000WAN Manual

Manual

WA100070XX Easy Setup Using WPS FeatureSX-DS-3000WAN allows you to congure its wireless settings easily using a push switch if your wireless router supports WPS (Wi-Fi Protected Setup). This sheet explains how to congure wireless settings using the push switch.EnglishSX-DS-3000WAN will start to communicate with your wireless router.The Wireless LED's lighting pattern will show you if the wireless conguration succeeded or failed.- The name, position and shape of the WPS button will dier depending on your wireless router. For details, refer to the operation manual that came with your wireless router.- Please use only one wireless router. If two or more routers are waiting for wireless connections, SX-DS-3000WAN will not be able to connect properly.SuccessorSX-DS-3000WANFail- Within 3-10 sec after pressing and holding down the push switch, the Wireless LED will blink in Green.- It may take a while to complete the wireless conguration depending on your environment (up to 2 min).Connect the AC adaptor to SX-DS-3000WAN and the AC plug to the power outlet.SX-DS-3000WANPower OutletAC Adaptor- It is not necessary to connect a network cable to SX-DS-3000WAN.1Conrm that the Wireless LED(WLAN) on SX-DS-3000WAN blinks in Orange or turns to Green.- If the Wireless LED does not blink in Orange or turn to Green, reset SX-DS-3000WAN to factory defaults and start from step 1 again. For how to reset SX-DS-3000WAN to its factory defaults, refer to the Users Manual or Setup Guide.Press the WPS button on your wireless router.Conrm that your wireless router is ready for a wireless connection to be made.Wireless RouterWPSPress and hold the push switch on SX-DS-3000WAN. When the Wireless LED blinks in Green, release the push switch.When successful, the Wireless LED will turn to Green.In this case, wireless conguration is complete.- Power o SX-DS-3000WAN, move it to where you wish to use it and then power it on again.- Connect the USB device(s) that you wish to use over the network to SX-DS-3000WAN.- To install the software applications onto your computer, click Computer Conguration from the menu screen. For details, refer to the Users Manual.When wireless conguration has failed, the Wireless LED will blink in Red.Read the instructions on this sheet and start from step 3 again.- It is not necessary to install the applications if you plan to use printers with the standard Windows printing feature.! NOTEorSX-DS-3000WANSearching for networkConnected to existing network2345Push SwitchSX-DS-3000WANTo perform the wireless conguration using WPS, your wireless router must support WPS. Please make sure that a wireless router supporting WPS is set up in your environment.While performing this conguration, please temporarily move SX-DS-3000WAN closer to your wireless router to make it easier for both devices to communicate.Depending on your wireless router, WPS may need to be enabled manually. For details, refer to the operation manual that came with your wireless router.If a security feature such as MAC Address ltering is enabled on your wireless router, disable it temporarily so that SX-DS-3000WAN can communicate with your wireless router.
Push Switch SX-DS-3000WAN Power Outlet* The information below will be your own information that is used on your network and none of us are able to nd it from our side. For how to see each setting, please refer to the operating manual that came with your router or contact the manufacturer.(De) Auf der CD-ROM befindet sich ein deutschsprachiges Setup-Handbuch im PDF-Format. Zum Anzeigen der PDF-Datei unter Windows benötigen Sie den Acrobat Reader.(Fr) Un guide d'installation en français au format PDF est inclus dans le CD-ROM. Acrobat Reader est nécessaire pour lire les fichiers PDF dans un environnement Windows.(It) Una Guida alla configurazione in italiano è inclusa nel CD-ROM come file PDF. Per visualizzare il file PDF in ambiente Windows è necessario Acrobat Reader.(Es) En el CD-ROM se incluye una Guía de instalación en español como archivo PDF. Se necesita Acrobat Reader para ver el archivo PDF en un entorno Windows.(Pt) Um Guia de Configuração em português é fornecido no CD-ROM no formato de arquivo PDF. É necessário ter o Acrobat Reader para visualizar o arquivo PDF em um ambiente Windows.SX-DS-3000WANAC AdaptorDevice Server Setup CD (Including conguration software and online manual)　 http://www.silex.jp/register/Parts and FucntionsThank you very much for purchasing our wireless USB Device Server "SX-DS-3000WAN".This Setup Guide provides information on how to congure and use SX-DS-3000WAN in your network environment. Please follow instructions on Step1- Step 4 to congure SX-DS-3000WAN. Before you begin, please carefully read the "Safety Instructions" and "About Wireless Interference" in the online manual included in the CD-ROM to properly congure SX-DS-3000WAN.Please complete the user registration after you nish the setup.It is required to provide you better technical supports and services.User RegistrationFor the user registration, a Serial Number is required. The Serial Number is a last 6-digit number of the Ethernet Address(12-digit number) which can be found on the bottom of the unit.Package ContentsWA06170XXUser Registration WebsiteExample: If the Ethernet Address is "00:80:92:00:11:22", the Serial Number will be "001122".Network CableConnect the AC adaptor to SX-DS-3000WAN and the AC plug to the power outlet.SX-DS-3000WAN Power OutletAC AdaptorConrm that both POWER LED and LAN LED turn on.3If SX-DS-3000WAN has been used in other network or you wish to start conguration from factory defaults again, follow the instructions below.Remove the AC plug from the power outlet. Press and hold down the push switch on SX-DS-3000WAN while inserting the AC plug back into the power outlet.Keep holding a while and release the push switch when LAN LED turns to Red.12Step2 Getting StartedFactory Default CongurationConnect SX-DS-3000WAN to your wireless router using a network cable.SX-DS-3000WANWireless Router12Connect SX-DS-3000WAN to your network using a network cable.Before You Begin About conguration methodsThis Setup Guide explains how to congure SX-DS-3000WAN using a network cable. For other conguration methods, please refer to the online manual included in the CD-ROM.Following 3 conguration methods are supported.- Conguration using a network cable (Recommended)- Conguration using a WPS feature of your wireless router- Conguration using a USB ash driveBy connecting SX-DS-3000WAN to your existing network using a network cable, you can congure the network settings from your computer.For this method, a network cable is required.By saving the conguration information to a USB ash drive and connecting it to SX-DS-3000WAN, you can congure the network settings. To save the conguration information to the USB ash drive, please use the conguration utility contained in the CD-ROM. For this conguration method, a USB ash drive is required.If your wireless router supports WPS (Wi-Fi Protected Setup), the network conguration can be done automatically by pressing the wireless connection button on your wireless router and the push switch on SX-DS-3000WAN. For this conguration method, a wireless router supporting WPS is required.Network CableSX-DS-3000WANWireless RouterSample connectionAugust, 2011EnglishSX-DS-3000WANIf LAN LED turns to Green or OrangeSuccsessfully connected to your network. Go on to Step 3.If LAN LED is OFFThe network cable is not plugged properly. Start from Step2-1 again.If the network cable is plugged properly, SX-DS-3000WAN may contain icorrect network settings. In such a case, reset SX-DS-3000WAN to factory defaults and start from Step2-1 again. For details on how to reset SX-DS-3000WAN to factory defaults, refer to “Factory Default Conguration”.Step1 Necessary Wireless Setting InformationTo use SX-DS-3000WAN in your wireless network, SX-DS-3000WAN must have the same settings as your wireless router (Access Point).Please check the wireless settings of your router and write it down on the table below:Wireless ModeThe SSID is an ID that distinguishes a wireless LAN network from others. For wireless devices to communicate with each other on a wireless network, they must share the same SSID. (The SSID is also referred to as "ESSID".) Depending on your wireless router, it may have several SSIDs. If there are dierent SSIDs for a game machine and computer, use the one for the computer.There are "Infrastructure" mode and "Ad hoc" mode.Select "Infrastructure" mode when you wish to connect to your network via a wireless router.Select "Ad hoc" mode when you wish to make a direct connection to your wireless computer without using a wireless router. When using this mode, set the same channel as your wireless computer.SSID SSIDEncryption Mode(Network Authentication)No EncryptionIf WEP encryption is used, wireless communication will be encrypted using the settings for "WEP Key 1-4" and "Key Index".Set the same "WEP key Size(64bit/128bit)", "WEP Key" and "Key Index" as your wireless router.Uses no encryption for wireless communication.(In this case, you do not have to check any of your settings beforehand.)WEPUses PSK for network authentication. The encryption key will be generated by communicating with the wireless router using a Pre-Shared key. WEP key setting is not used for this mode. Set the same "Pre-Shared key" and "Encryption Mode"(TKIP/AES) as your wireless router. The Pre-Shared key is also referred to as "Network Key" or "Password".WPA / WPA2WEP KeyorPre-Shared KeyWEP key Size andKey IndexorEncryption Mode(Open / Shared)Network AuthenticationWEPConguration MemoSetup Guide (this document)SX Virtual Link User’s GuideWarranty BookletRubber feet (4 psc)If POWER LED is OFFThe AC adaptor is not plugged properly. Start from Step2-2 again.Keep holding down the push switchLAN LEDPush SwitchSX-DS-3000WANONandSX-DS-3000WANPOWER LED LAN LEDON ONPlease check the following items are bundled with SX-DS-3000WAN:WPA WPA2/ /Power Outlet(1) Power Connector(2) Network Port(3) Push Switch(4) Wireless LED(5) LAN LED(6) STATUS LED(7) POWER LED(8) USB Port(9) Ethernet Address(10) Serial Number(8)(7)(5)(2)(3)(1) (6)(4)(9)E/ A : 008092XXXXXXS/ N : YYYYYYYYY(10)Infrastructure / Ad hoc (ch. )
Step3 Setup SX-DS-3000WAN<<< Windows environment >>>Insert the Device Server Setup CD into your computer.* In Windows 7 (or Windows Vista), the User Account Control screen is displayed. Click Yes . (Click Continue in Windows Vista).* If SX-DS-3000WAN is not displayed in a list,,,- Check the network setting on your computer (IP address setting) is properly congured.- Please temporarily disable the security software (e.g. "Virus Buster" of Trend Micro, Inc.) or the rewall function of Windows XP.123567Before clicking Finish, follow the instructions on Step 4 to take eect of the conguration you made. After completing Step 4, click Finish and go on to install the USB device connection utility, "SX Virtual Link".* The information diplayed here will dier depending on how you have congured.* If you wish to assign the IP address manually, click Assign IP Address and enter the IP address, subnet mask and default gateway.* If the window does not have the option, ”Get IP Address Automatically”, it is unable to obtain the IP address from DHCP server. In such a case, the sample address created with your computer's setting will be displayed. Please enter the IP address manually.* Use the wireless setting information that you have checked at Step 1. Select the SSID of the wireless network that you to connect to and enter the network key. If the wireless network that you wish to connect to is not shown on a list, click Detailed Cong button and congure each setting in the window displayed. * If you plan to use SX-DS-3000WAN on a wired network using a network cable, check Skip wireless conguration and click Next.8911Congure SX-DS-3000WAN using the conguration software included in the Device Server Setup CD.The conguration can be done from Windows or Macintosh computers.Insert the Device Server Setup CD into your computer.Double click the CD-ROM icon ( ) and then double click DSSetup ( ).1234567891110Restart SX-DS-3000WAN to take eect of the new settings.Remove the AC plug from the power outlet and then network cable from SX-DS-3000WAN.* If you plan to use SX-DS-3000WAN on a wired network, it is not necessary to unplug the network cable.Step4 Enabling the New SettingsSX-DS-3000WANUSB DevicesConrm that the Wireless LED turns on.SX-DS-3000WANSX-DS-3000WANPower OutletNetwork CablePower OutletIf Wireless LED turns to GreenSuccessfully connected to the wireless network. The setup is complete now.Go on to install the USB device connection utility, SX Virtual Link. Please refer to the "SX Virtual Link User's Guide".If Wireless LED blinks in OrangeSearching for a wireless network.Please wait until a wireless connection is made.When not connected within 2-3 min, the SX-DS-3000WAN's wiress settings may not have been congured properly. Go back to Step 1 and check the wireless setting information once again.If Wireless LED is OFFThe network cable is plugged.When you plan to use SX-DS-3000WAN in a wireless network, follow the instructions from Step 4-1 again.When you plan to use SX-DS-3000WAN in a wired network, check the LAN LED's lighting pattern. If the LAN LED turns to Green or Orange, SX-DS-3000WAN has been connected to a wired network.The setup is complete now.1234<<< Macintosh environment >>>ONWireless LEDClick Device Server Conguration.Click Congure using the setup utility (Recommended).Check the notice information and click Next.Read the software license agreement and click Yes .Select SX-DS-3000WAN and click Next.Select Get IP Address Automatically and click Next.Select the wireless network that you wish to connect to from a list , enter the network key and click Next.Check the settings and click Execute.Click Device Server Conguration.Click Congure using the setup utility (Recommended).Check the notice information and click Next.Read the software license agreement and click Yes .Select SX-DS-3000WAN and click Next.* If SX-DS-3000WAN is not displayed in a list,,,- Check the network setting on your computer (IP address setting) is properly congured.Select Get IP Address Automatically and click Next.* If you wish to assign the IP address manually, click Assign IP Address and enter the IP address, subnet mask and default gateway.* If the window does not have the option, ”Get IP Address Automatically“, it is unable to obtain the IP address from DHCP server. In such a case, the sample address created with your computer's setting will be displayed. Please enter the IP address manually.Select the wireless network that you wish to connect to from a list, enter the network key and click Next.* Use the wireless setting information that you have checked at Step 1. Select the SSID of the wireless network that you with to connect to and enter the network key. If the wireless network that you wish to connect to is not shown on a list, click Detailed Cong button and congure each setting in the window displayed. * If you plan to use SX-DS-3000WAN on a wired network using a network cable, check Skip wireless conguration and click Next.Check the settings and click Execute.* The information diplayed here will dier depending on how you have congured.Before clicking Finish, follow the instructions on Step 4 to take eect of the conguration you made. After completing Step 4, click Finish and go on to install the USB device connection utility, "SX Virtual Link".Connect the USB device that you wish to use over the network to SX-DS-3000WAN using a USB cable and then insert the AC plug of SX-DS-3000WAN to the power outlet.Click Yes and click Finish.Click Yes and click Finish.* If the menu screen does not appear automatically, open My Computer, select the CD-ROM drive and execute Autorun.exe.4Click Yes .10
FederalCommunicationCommissionInterferenceStatementThisequipmenthasbeentestedandfoundtocomplywiththelimitsforaClassBdigitaldevice,pursuanttoPart15oftheFCCRules.Theselimitsaredesignedtoprovidereasonableprotectionagainstharmfulinterferenceinaresidentialinstallation.Thisequipmentgenerates,usesandcanradiateradiofrequencyenergyand,ifnotinstalledandusedinaccordancewiththeinstructions,maycauseharmfulinterferencetoradiocommunications.However,thereisnoguaranteethatinterferencewillnotoccurinaparticularinstallation.Ifthisequipmentdoescauseharmfulinterferencetoradioortelevisionreception,whichcanbedeterminedbyturningtheequipmentoffandon,theuserisencouragedtotrytocorrecttheinterferencebyoneormoreofthefollowingmeasures: Reorientorrelocatethereceivingantenna. Increasetheseparationbetweentheequipmentandreceiver. Connecttheequipmentintoanoutletonacircuitdifferentfromthattowhichthereceiverisconnected. Consultthedealeroranexperiencedradio/TVtechnicianforhelp.ThisdevicecomplieswithPart15oftheFCCRules.Operationissubjecttothefollowingtwoconditions:(1)Thisdevicemaynotcauseharmfulinterference,and(2)thisdevicemustacceptanyinterferencereceived,includinginterferencethatmaycauseundesiredoperation.Thisdeviceisrestrictedtoindoorusewhenoperatedinthe5.15to5.25GHzfrequencyrange.This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 20cm between the radiator & your body. CanadaRequestThisdevicecomplieswithIndustryCanadalicence‐exemptRSSstandard(s).Operationissubjecttothefollowingtwoconditions:(1)thisdevicemaynotcauseinterference,and(2)thisdevicemustacceptanyinterference,includinginterferencethatmaycauseundesiredoperationofthedevice.Thedevicefortheband5150‐5250MHzisonlyforindoorusagetoreducepotentialforharmfulinterferencetoco‐channelmobilesatellitesystems;ThisClassBdigitalapparatuscomplieswithCanadianICES‐003.CetappareilnumeriquedelaclasseBestconformealanormeNMB‐003duCanada.This equipment complies with IC RSS-102 radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance20cmbetweentheradiator&yourbody. 

Navigation menu