Silver Star Intelligent Technology I3 Robotic Vacuum Cleaner User Manual

Shenzhen Silver Star Intelligent Technology Co., Ltd. Robotic Vacuum Cleaner Users Manual

15_I3 UserMan

Intelligent Vacuum CleanerUSER MANUALThank you for purchasing the product.Please read the manual carefully before using.
1. Safety Instruction………………2-42. Product Formation………………5-63. Product Installation……………… 74. Product Usage…………………8-115. Product Maintenance……………12-151.1 Use Notes 1.2 Safety Precautions 1.3 Child Safety1.4 About Battery1.5 Usable Range 1.6 Exception Clause 2.1 Main Body and Accessories2.2 Accessories Introduction4.1 Main body’s Usage4.2 Charging Methods 4.3 Remote Control’s Usage5.1 Daily Storage 5.2 Cleaning of Charging Plate5.3 Clean the Dust Box 5.4 Clean the Main Brush 5.5 Clean the Side Brush 5.6 Clean the Wheels5.7 Clean the Sensors Instructions for use shall be provided with the appliance so that appliance can be used safely. The plug must be removed from the socket-outlet before cleaning or maintaining the appliance. This appliance can be used by children aged from 8 years and above and persons with reduced physical, sensory or mental capabilities or lack of experience and knowledge if they have been given supervision or instruction concerning use of the appliance in a safe way and understand the hazards involved. Children shall not play with the appliance. Cleaning and user maintenance shall not be made by children without supervision. Children should be supervised to ensure that they do not play with the appliance. Only to be used with the power supply unit provided with the appliance. This appliance is intended to be used in household only.Warnings
Only use the original adaptor, battery and charging station, or else it will damage the machine and cause fire because of electric shock and high voltage.If you find that the main body and accessories are damaged, Please do not use the cleaner and keep contact with the after-service department.Anyone is not allowed to disassemble, maintenance or remould theDo not touch the battery socket and the machine when your hands are wet, or else it will cause electric shock.Pull off the plug before doing the maintenance.If the mains cord is destroyed, to avoid danger, please contact us and wait for professional persons to replace it.
Switch off the cleaner when taking out the battery.Prevent water, oil and other liquid into the machine.Clean up the wire in thefloor, or else it will hinder the working of the machine. Please remove all fragile objects.Please don’t collect something sharp with the device, such as glass sheet, iron nail andothers, for fear of the damage to the product.Don’t use this product without the protective guard if it is suspendedin the air so as to prevent the vacuum cleaner from falling accidentally and causing personal injury.Do not put the machine behind the fire, inflammable, explosive and corrosive materials.Do not put your clothes or any place of your body(hair, finger and so on) into the main brush and wheels, or it will cause personal injury.Please don’t use this cleanerin humid or flammable, explosive and corrosive environments.Danger!Electric shock.
1.6 Exception ClauseOne of the following circumstances of the product is not in the range of free service. Repair under payment can be carried out:A. The damage to the product arises out of the user’s operation and storage against our Manual; B. The whole machine and its components have been out of the free warranty period;C. The damage to the product arises out of the disassembly by the serviceman not sent or authorized by our company; D. The valid purchase invoice can’t be provided; E. The model in the warranty card is inconsistent with that of the product for repair or is altered; F. The damage to the product arises out of the irresistible factors such as natural disasters;G. The failure or damage to the product arises out of accidental or human factors (including disoperation, liquid feeding, improper insertion and pulling, scratch, handling, bumping, inappropriate voltage input, etc).1. The machine will only be used with the original battery.2. Please turn off the power switch before taking out the battery.3. The battery must be taken out before abandoning it.4. If you wnt to replace the battery,please keep contact with our after service department. It will lead to accident if wrong battery is put in the machine.5. If the battery is leaked,please do not touch the liquid, wipe the liquid with dry cloth,and put the battery to recycle bin or maintenance point,do not throw it at random.6. Please handle the old battery of the parts(remmote control). The battery includes hazardous substance,please put it to recycle site according to original environmental protection regulations.
Intelligent Vacuum CleanerUSER MANUALThank you for purchasing the product.Please read the manual carefully before using.Main Body1pc Charging Station*1pc Battery*1pcFilterAdaptor*1pc
Right WheelRubber BrushSide BrushLeft WheelMiddle BrushBatteryFront Wheel
1. Connect the terminal of the battery pack to the machine; then press the battery pack downforwad into the battery box.2. Please put the docking station on the flat ground against the wall. Please clean up the dust and other debris ,stick the dock station on floor. Next, inserting the adapter into the power socket.Danger! Electric shock.Adapter SocketCharging TerminalPlease install the battery before using the cleaner.RedBlackAim at the terminal and insertit during wiring.Unplug it in the reversedirection during unwiring.
4.Product Usage4.1.1 Introduction to Control Button4.1.2.1 Manual Mode4.1 Main body’s Usage4.1.2 Work Mode1. Shortly-press the Power key and the indicator will light. The cleaner will enter the standby state.And then start cleaning automatically.2. When the vacuum cleaner is in the standby state, press the Power key and it will start running. The Recharge key will flash blue and the device will find the dock station.Recharge ButtonPower ButtonButton Introduction
4.1.3 Operation guideline of indicators4.2 Charging Methods4.2.1 Manual Charging4.2.2 Auto Charging2. Charging via the remote control:When the cleaner is at the standby state, press the “recharge” button to let the machine enter the recharge mode.Automatic Charging: When the working voltage is below 13V.The blue indicator of the recharge key will flash and the device will enter the Recharge mode.1. Charging with the docking station:Connect the adapter to the docking station first, and then insert to the power supply; place the vacuum cleaner on the docking station for charging. (The blue indicator of the recharge key will flash during the recharge; the blue indicator will be on all the time after the device is fully charged).Turn-off Light-offLight-onLight-onFlash BlueFlash BlueFlash BlueFlash Blue at the same timeBlue-light Long-BrightLong-press" "4S and enter the OFF state. Short-press " " and enter the Auto Cleaning mode. Long-press " " 6S and it will enter pairing mode.Short-press " " and it will enter the Recharge mode.Short-press " " and enter the Standby state.Turn-onCleaningRechargeChargingErrorFully ChargedPairing modeNo. State Display Operation
Tips:1. Customers should operate the cleaner within 7 meters distance covered by WIFI signal with our remote control; otherwise, the operation fails.2. When press the “auto-recharge” button, the vacuum cleaner will may fail to return to the charging base either because of complex surrounding obstacles or running-out-of batteries.Single Room Cleaning Start/Stop Auto cleaningRight-turn buttonBack buttonAuto cleaning buttonLeft-turn button Forward buttonAuto chargingSet the current timeButton of scheduling to clean Edge cleaning button 4.3 Use of Remote ControlFunction Guidelines1. When the cleaner is in standby mode, press the button to enter the auto-cleaning mode.2. When the cleaner is at any cleaning mode, press the button to let it shift to standby mode. After finishing the sweeping task it automatically turns into recharging mode.3. When setting the time, press this button to hold settings. 4. The cleaner will respond with a sound when receiving an order from the remote control.Long-press the button and the cleaner will forward; releasing, it stops moving.Long-press the button and the cleaner rotates counterclockwise; releasing, it stops.Long-press the button and the cleaner rotates clockwise; releasing, it stops rotating.Long-press the button and the cleaner moves backward; releasing, it stops moving.Function InformationIntroduction of remote control buttons
1. Press the button to change the cleaner’s cleaning state to standby.2. When the cleaner is standby, press the button to let it shift to auto cleaning mode. After finishing the sweeping will turns into recharging mode.3. The cleaner will respond with a sound when receiving an order from the remote control.1. Press the button to change the cleaner’s cleaning state to standby.2. When the cleaner is standby, press the button to let it shift to edge cleaning mode. After finishing the sweeping task it automatically turns into recharging mode.3. The cleaner will respond with a sound when receiving an order from the remote control.1. Press the button to change the cleaner’s cleaning state to standby.2. When the cleaner is standby, press the button to let it shift to single-room cleaning mode. After finishing the sweeping task it automatically turns into recharging mode.3. The cleaner will respond with a sound when receiving an order from the remote control.1. In the standby state pressing this button, the “ ”and“ ” on the display screen will flash. Then press the up/down key to adjust the hour.2. Press the left/right-turn key “ ” and “ ” to change into “ ” to adjust the minute.3. Please save your settings by pressing the “ ” or “ ” key. The cleaner will respond with a sound when receiving an order from the remote control.1. In the standby state pressing this button, the “ ”and“ ” on the display screen will flash. Then press the up/down key to adjust the hour.2. Press the left/right-turn key “ ” and “ ” to change into “ ” to adjust the minute.3. Please save your settings by pressing the “ ” or “ ”. The cleaner will respond with a sound when receiving an order from the remote control.1. In the cleaning mode, press the button to change the vacuum cleaner into standby. 2. In the standby mode, press the button to let it do in recharging mode. The cleaner will respond with a sound when receiving an order from the remote control.Auto Cleaning buttonEdge Cleaning buttonSingle Room Cleaning buttonButton of time-settingButton of scheduling to cleanButton of rechargingFunction Guidelines Function InformationSteps of resetting the remote control:A. Keep the cleaner in the standby mode;B. Press the “power” button of the cleaner;C. Waiting for 6s the machine will start to reset its code. The power indicator will flash.D. Press the “ ” button, release the key. When listened the “didi” sound.The pairingcode process is finished.Remarks: if do not listen the “didi” sound, it means the pair-code operation is failed. Please repeat the above procedures.Note:If the remote control fails to respond, please check whether its battery power is too low. If you still can't operate the cleaner after charge,then re-pair again.
- 12 -5.1 Daily Storage5.2 Cleaning of Charging Plate5.3 Clean the Dust Box5.3.1 Assembly and Disassembly of Dustbin5. Product MaintenanceIf do not use the cleaner for a long time please fully charge the battery first and store it in a dry place. 1. Please turn off the power switch or disconnect the power plug first.2. Please clean the charging plate monthly with dry cloth.3. Do not use oil for scrubbing.Press and hold the dustbin key and then take out the dustbin.ChargingPole Piece
- 13 -5.3.2 Cleaning dustbin1. Open the baffle first, and then pour out the dust. Recommendation:the dustbin should be cleaned periodically.2. Please clean the dustbin with the cleaning brush.4.The dustbin can be washed. Note: the dust box should be completely air-dried before re-insertingcold airhot air5. After cleaning, re-assemble the filter in the dustbin first, and then install the dustbin into the cleaner.
5.4 Clean the Main Brush5.4.1 Disassemble the Main Brush5.4.2 Cleaning the main brush and the rubber brush3. Take out the middle brushes and its scraper assembly.1. Push the locking-bar buckle and lift it upward. 2. Clutch the main brush and lift it upward.1. Please clean the main brush and rubber brush with the cleaning brush regularly. 2. Please remove the hair and other entanglements on the main brush regularly.- 14 -
- 15 -5.7 Clean the Sensors 1. Unscrew the screws on the side brush with a screwdriver. 2. Take out the side brush, tidy the hair and trashon and inside the cell.Clean the front, left and right wheels regularly with a cleaning brush.After each cleaning work is completed, dry cotton cloth is used to dry the transparent plate to prevent dust from being accumulated on the plate so as to affect the performance of this product.Ground Monitoring SensorIR Sensor5.5 Clean the Side Brush5.6 Clean the Wheels
- 16 -Warm tips: If corresponding faults cannot be removed, please contact our after service team.6. Common Failure of device taking off The device takes off and stops in 1 second.Failure of front wheelThe front wheel gets stuck and doesn’t rotate.Failure of ground inspection There is a problem in the ground inspection.Low electricity of batteryBattery power has been extremely low (but not the critical point of recharge voltage).Failure of front bumper The impact switches on the left and right front shells can’t be restored.Failure of main brushThe main brush wheel is overloaded or under loaded. Failure of side brushThe side-sweeper wheel is overloaded or under loaded. There is a problem in the wall inspection.Failure of fanFlash blue lighttwice with one soundFlash blue light three times with one soundFlash blue light four times with one soundFlash blue light five times with one soundFlash blue light six times with one soundFlash blue light seven times with one soundFlash blue light eight times with one soundFlash blue light nine times withone soundFlash blue light ten times with one soundFlash blue light eleven times withone soundFlash blue light twelve times withone soundError-flashindicator Fault NamesFault Forms SolutionsFailure of right wheelThe left wheel doesn’t rotate and is overloaded.Please check if there are twisters on the left wheel of the device.Please check if there are twisters on the right wheel of the device.Please take the device back to the floor. Don’t have it suspended in the air. Please check if there are twisters onthe small wheels of the front wheel.Please check if the sensing window atthe bottom of the device is abnormally shielded.Please return the device to the dockingstation for charging.Please check if there are things like hair or cloth twine the side brush.Please check if the transparent window of the wall inspection is shielded or obstructed by hair and cloth.Failure of chargingFlash blue light fourteen times with one soundThe right wheel doesn’t rotate and is overloaded.
- 17 -7.Technical ParametersMain Body ParametersAccessories ParametersWorking VoltageRated Power Remarks: our company reserve the right due to the need forany technology, product design changes on products improvement. The power of interpretation is owned by our company.VoiceN.W.SpecificationCharging TimeAbout 3-5HWorking TimeWork Temp RangeWork Humidity RangeDC14.8 V 24 W Output VoltageAdaptorCharging StationInput VoltageDC19VOutput Current 600mADC 19VBatteryBattery Capacity 2600mAhLithium battery
- 18 -This device complies with Industry Canada licence-exempt RSS standard(s). Operation is subject to the following two conditions: (1) this device may not cause interference, and (2) this device must accept any interference, including interference that may cause undesired operation of the device.Le présentappareilestconforme aux CNR d'Industrie Canada applicables aux appareils radio exempts de licence. L'exploitationestautorisée aux deux conditions suivantes : (1) l'appareil ne doit pas produire de brouillage, et (2) l'utilisateur de l'appareildoit accepter tout brouillageradioélectriquesubi, mêmesi le brouillageest susceptible d'encompromettre le fonctionnement.The manufacturer is not responsible for any radio or TV interference caused by unauthorized modifications or change to this equipment. Such modifications or change could void the user’s authority to operate the equipment.This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:-- Reorient or relocate the receiving antenna. -- Increase the separation between the equipment and receiver. -- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. -- Consult the dealer or an experienced radio/TV technician for help.RF warning statement:The device has been evaluated to meet general RF exposure requirement. The device can be used in portable exposure condition without restriction.
Shenzhen Silver Star Intelligent Electronic Co., LtdAddress: Block D, Huiqing Technical Park, Dafu Industrial Zone, AobeiCommunity, Guanlan Street, Baoan District, Shenzhen CityHttp://www. yxrobot.com

Navigation menu