Silver Star Intelligent Technology I3 Robotic Vacuum Cleaner User Manual
Shenzhen Silver Star Intelligent Technology Co., Ltd. Robotic Vacuum Cleaner Users Manual
15_I3 UserMan
| Download: |  |
| Mirror Download [FCC.gov] | |
| Document ID | 3648762 |
| Application ID | HbimIabpJvTrwsiDCDCWzg== |
| Document Description | 15_I3 UserMan |
| Short Term Confidential | No |
| Permanent Confidential | No |
| Supercede | No |
| Document Type | User Manual |
| Display Format | Adobe Acrobat PDF - pdf |
| Filesize | 188kB (2350030 bits) |
| Date Submitted | 2017-11-22 00:00:00 |
| Date Available | 2017-11-22 00:00:00 |
| Creation Date | 2017-11-13 16:09:24 |
| Producing Software | pdfFactory Pro 3.50 (Windows 7 Chinese (Simplified)) |
| Document Lastmod | 0000-00-00 00:00:00 |
| Document Title | Users Manual |
| Document Creator | pdfFactory Pro www.fineprint.cn |
| Document Author: | qcd_test2 |
Intelligent Vacuum Cleaner USER MANUAL Thank you for purchasing the product. Please read the manual carefully before using. Warnings Instructions for use shall be provided with the appliance so that appliance can be used safely. The plug must be removed from the socket-outlet before cleaning or maintaining the appliance. This appliance can be used by children aged from 8 years and above and persons with reduced physical, sensory or mental capabilities or lack of experience and knowledge if they have been given supervision or instruction concerning use of the appliance in a safe way and understand the hazards involved. Children shall not play with the appliance. Cleaning and user maintenance shall not be made by children without supervision. Children should be supervised to ensure that they do not play with the appliance. Only to be used with the power supply unit provided with the appliance. This appliance is intended to be used in household only. 1. Safety Instruction………………2-4 1.1 1.2 1.3 1.4 1.5 1.6 Use Notes Safety Precautions Child Safety About Battery Usable Range Exception Clause 2. Product Formation………………5-6 2.1 Main Body and Accessories 2.2 Accessories Introduction 3. Product Installation……………… 7 4. Product Usage…………………8-11 4.1 Main body’s Usage 4.2 Charging Methods 4.3 Remote Control’s Usage 5. Product Maintenance……………12-15 5.1 5.2 5.3 5.4 5.5 5.6 5.7 Daily Storage Cleaning of Charging Plate Clean the Dust Box Clean the Main Brush Clean the Side Brush Clean the Wheels Clean the Sensors Only use the original adaptor, battery and charging station, or else it will damage the machine and cause fire because of electric shock and high voltage. If you find that the main body and accessories are damaged, Please do not use the cleaner and keep contact with the after-service department. Anyone is not allowed to disassemble, maintenance or remould t he Pull off the plug before doing the maintenance. Do not touch the battery socket and the machine when your hands are wet, or else it will cause electric shock. If the mains cord is destroyed, to avoid danger, please contact us and wait for professional persons to replace it. Don’t use this product without the protective guard if it is suspended in the air so as to prevent the vacuum cleaner from falling accidentally and causing personal injury. Do not put the machine behind the fire, inflammable, explosive and corrosive materials. Do not put your clothes or any place of your body(hair, finger and so on) into the main brush and wheels, or it will cause personal injury. Prevent water, oil and other liquid into the machine. Clean up the wire in the Please remove all fragile floor, or else it will hinder objects. the working of the machine. Danger! Electric shock. Switch off the cleaner when taking out the battery. Please don’t collect something sharp with the device, such as glass sheet, iron nail and others, for fear of the damage to the product. Please don’t use this cleaner in humid or flammable, explosive and corrosive environments. 1. The machine will only be used with the original battery. 2. Please turn off the power switch before taking out the battery. 3. The battery must be taken out before abandoning it. 4. If you wnt to replace the battery,please keep contact with our after service department. It will lead to accident if wrong battery is put in the machine. 5. If the battery is leaked,please do not touch the liquid, wipe the liquid with dry cloth,and put the battery to recycle bin or maintenance point,do not throw it at random. 6. Please handle the old battery of the parts (remmote control). The battery includes hazardous substance,please put it to recycle site according to original environmental protection regulations. 1.6 Exception Clause One of the following circumstances of the product is not in the range of free service. Repair under payment can be carried out: A. The damage to the product arises out of the user’s operation and storage against our Manual; B. The whole machine and its components have been out of the free warranty period; C. The damage to the product arises out of the disassembly by the serviceman not sent or authorized by our company; D. The valid purchase invoice can’t be provided; E. The model in the warranty card is inconsistent with that of the product for repair or is altered; F. The damage to the product arises out of the irresistible factors such as natural disasters; G. The failure or damage to the product arises out of accidental or human factors (including disoperation, liquid feeding, improper insertion and pulling, scratch, handling, bumping, inappropriate voltage input, etc). Main Body 1pc Charging Station *1pc Intelligent Vacuum Cleaner USER MANUAL Filter Thank y ou f or purc has ing t he produc t . P lease read the manual c arefully bef ore us ing. Battery *1pc Adaptor *1pc Front Wheel Side Brush Battery Right Wheel Rubber Brush Left Wheel Middle Brush Please install the battery before using the cleaner. Aim at the terminal and insert it during wiring. Unplug it in the reverse direction during unwiring. Black Adapter Socket Red Charging Terminal 1. Connect the terminal of the battery pack to the machine; then press the battery pack downforwad into the battery box. 2. Please put the docking station on the flat ground against the wall. Please clean up the dust and other debris ,stick the dock station on floor. Next, inserting the adapter into the power socket. Danger! Electric shock. 4.Product Usage 4.1 Main body’s Usage 4.1.1 Introduction to Control Button Button Introduction Recharge Button Power Button 4.1.2 Work Mode 4.1.2.1 Manual Mode 1. Shortly-press the Power key and the indicator will light. The cleaner will enter the standby state. And then start cleaning automatically. 2. When the vacuum cleaner is in the standby state, press the Power key and it will start running. The Recharge key will flash blue and the device will find the dock station. 4.1.3 Operation guideline of indicators No. State Operation Display Turn-off Light-off Long-press" OFF state. Turn-on Light-on Short-press " Standby state. Cleaning Light-on Recharge Flash Blue Charging Flash Blue Error "4S and enter the " and enter the Short-press " " and enter the Auto Cleaning mode. Short-press " " and it will enter the Recharge mode. Flash Blue at the same time Fully Charged Blue-light Long-Bright Pairing mode Flash Blue Long-press " " 6S and it will enter pairing mode. 4.2 Charging Methods 4.2.1 Manual Charging 1. Charging with the docking station: Connect the adapter to the docking station first, and then insert to the power supply; place the vacuum cleaner on the docking station for charging. (The blue indicator of the recharge key will flash during the recharge; the blue indicator will be on all the time after the device is fully charged). 2. Charging via the remote control: When the cleaner is at the standby state, press the “recharge” button to let the machine enter the recharge mode. 4.2.2 Auto Charging Automatic Charging: When the working voltage is below 13V.The blue indicator of the recharge key will flash and the device will enter the Recharge mode. 4.3 Use of Remote Control Introduction of remote control buttons Forward button Left-turn button Start/Stop Auto cleaning Right-turn button Back button Auto cleaning button Edge cleaning button Single Room Cleaning Set the current time Button of scheduling to clean Auto charging Tips: 1. Customers should operate the cleaner within 7 meters distance covered by WIFI signal with our remote control; otherwise, the operation fails. 2. When press the “auto-recharge” button, the vacuum cleaner will may fail to return to the charging base either because of complex surrounding obstacles or running-out-of batteries. Function Guidelines Function Information 1. When the cleaner is in standby mode, press the button to enter the auto-cleaning mode. 2. When the cleaner is at any cleaning mode, press the button to let it shift to standby mode. After finishing the sweeping task it automatically turns into recharging mode. 3. When setting the time, press this button to hold settings. 4. The cleaner will respond with a sound when receiving an order from the remote control. Long-press the button and the cleaner will forward; releasing, it stops moving. Long-press the button and the cleaner rotates counterclockwise; releasing, it stops. Long-press the button and the cleaner rotates clockwise; releasing, it stops rotating. Long-press the button and the cleaner moves backward; releasing, it stops moving. Function Guidelines Auto Cleaning button Edge Cleaning button Function Information 1. Press the button to change the cleaner’s cleaning state to standby. 2. When the cleaner is standby, press the button to let it shift to auto cleaning mode. After finishing the sweeping will turns into recharging mode. 3. The cleaner will respond with a sound when receiving an order from the remote control. 1. Press the button to change the cleaner’s cleaning state to standby. 2. When the cleaner is standby, press the button to let it shift to edge cleaning mode. After finishing the sweeping task it automatically turns into recharging mode. 3. The cleaner will respond with a sound when receiving an order from the remote control. 1. Press the button to change the cleaner’s cleaning state to standby. Single Room Cleaning 2. When the cleaner is standby, press the button to let it shift to single-room cleaning button mode. After finishing the sweeping task it automatically turns into recharging mode. 3. The cleaner will respond with a sound when receiving an order from the remote control. Button of time-setting Button of scheduling to clean Button of recharging 1. In the standby state pressing this button, the “ ”and“ ” on the display screen will flash. Then press the up/down key to adjust the hour. 2. Press the left/right-turn key “ ” and “ ” to change into “ ” to adjust the minute. 3. Please save your settings by pressing the “ ” or “ ”. The cleaner will respond with a sound when receiving an order from the remote control. 1. In the standby state pressing this button, the “ ”and“ ” on the display screen will flash. Then press the up/down key to adjust the hour. 2. Press the left/right-turn key “ ” and “ ” to change into “ ” to adjust the minute. 3. Please save your settings by pressing the “ ” or “ ” key. The cleaner will respond with a sound when receiving an order from the remote control. 1. In the cleaning mode, press the button to change the vacuum cleaner into standby. 2. In the standby mode, press the button to let it do in recharging mode. The cleaner will respond with a sound when receiving an order from the remote control. Note: If the remote control fails to respond, please check whether its battery power is too low. If you still can't operate the cleaner after charge,then re-pair again. Steps of resetting the remote control: A. Keep the cleaner in the standby mode; B. Press the “power” button of the cleaner; C. Waiting for 6s the machine will start to reset its code. The power indicator will flash. D. Press the “ ” button, release the key. When listened the “didi” sound.The pairing code process is finished. Remarks: if do not listen the “didi” sound, it means the pair-code operation is failed. Please repeat the above procedures. 5. Product Maintenance 5.1 Daily Storage If do not use the cleaner for a long time please fully charge the battery first and store it in a dry place. 5.2 Cleaning of Charging Plate Charging Pole Piece 1. Please turn off the power switch or disconnect the power plug first. 2. Please clean the charging plate monthly with dry cloth. 3. Do not use oil for scrubbing. 5.3 Clean the Dust Box 5.3.1 Assembly and Disassembly of Dustbin Press and hold the dustbin key and then take out the dustbin. - 12 - 5.3.2 Cleaning dustbin 1. Open the baffle first, and then pour out the dust. Recommendation:the dustbin should be cleaned periodically. 2. Please clean the dustbin with the cleaning brush. cold air hot air 4.The dustbin can be washed. Note: the dust box should be completely air-dried before re-inserting 5. After cleaning, re-assemble the filter in the dustbin first, and then install the dustbin into the cleaner. - 13 - 5.4 Clean the Main Brush 5.4.1 Disassemble the Main Brush 1. Push the locking-bar buckle and lift it upward. 2. Clutch the main brush and lift it upward. 3. Take out the middle brushes and its scraper assembly. 5.4.2 Cleaning the main brush and the rubber brush 1. Please clean the main brush and rubber brush 2. Please remove the hair and other entanglements with the cleaning brush regularly. on the main brush regularly. - 14 - 5.5 Clean the Side Brush 1. Unscrew the screws on the side brush with a screwdriver. 2. Take out the side brush, tidy the hair and trash on and inside the cell. 5.6 Clean the Wheels Clean the front, left and right wheels regularly with a cleaning brush. 5.7 Clean the Sensors Ground Monitoring Sensor IR Sensor After each cleaning work is completed, dry cotton cloth is used to dry the transparent plate to prevent dust from being accumulated on the plate so as to affect the performance of this product. - 15 - 6. Common Error-flash indicator Fault Names Flash blue light twice with one sound Fault Forms Solutions The left wheel doesn’t rotate and is overloaded. Please check if there are twisters on the left wheel of the device. Flash blue light three times with one sound Failure of right wheel The right wheel doesn’t rotate and is overloaded. Please check if there are twisters on the right wheel of the device. Flash blue light four times with one sound Failure of device taking off The device takes off and stops in 1 second. Please take the device back to the floor. Don’t have it suspended in the air. Flash blue light five times with one sound Failure of front wheel The front wheel gets stuck and doesn’t rotate. Please check if there are twisters on the small wheels of the front wheel. Flash blue light six times with one sound Failure of ground There is a problem in the ground inspection inspection. Please check if the sensing window at the bottom of the device is abnormally shielded. Flash blue light Low electricity of seven times with battery one sound Battery power has been extremely low (but not the critical point of recharge voltage). Flash blue light eight times with one sound Failure of front bumper The impact switches on the left and right front shells can’t be restored. Flash blue light nine times with one sound Failure of main brush The main brush wheel is overloaded or under loaded. Flash blue light ten times with one sound Failure of side brush The side-sweeper wheel is overloaded Please check if there are things like or under loaded. hair or cloth twine the side brush. Flash blue light eleven times with one sound There is a problem in the wall inspection. Please return the device to the docking station for charging. Please check if the transparent window of the wall inspection is shielded or obstructed by hair and cloth. Flash blue light twelve times with Failure of fan one sound Flash blue light fourteen times with one sound Failure of charging Warm tips: If corresponding faults cannot be removed, please contact our after service team. - 16 - 7.Technical Parameters Main Body Parameters Working Voltage Accessories Parameters Adaptor DC14.8 V Output Voltage 24 W Rated Power Battery Lithium battery Battery Capacity 2600mAh Charging Time About 3-5H Working Time Output Current DC19V 600mA Charging Station Input Voltage DC 19V Work Temp Range Work Humidity Range Voice N.W. Specification Remarks: our company reserve the right due to the need fo rany technology, product design changes on products improvement. The power of interpretation is owned by our company. - 17 - This device complies with Industry Canada licence-exempt RSS standard(s). Operation is subject to the following two conditions: (1) this device may not cause interference, and (2) this device must accept any interference, including interference that may cause undesired operation of the device. Le présentappareilestconforme aux CNR d'Industrie Canada applicables aux appareils radio exempts de licence. L'exploitationestautorisée aux deux conditions suivantes : (1) l'appareil ne doit pas produire de brouillage, et (2) l'utilisateur de l'appareildoit accepter tout brouillageradioélectriquesubi, mêmesi le brouillageest susceptible d'encompromettre le fonctionnement. The manufacturer is not responsible for any radio or TV interference caused by unauthorized modifications or change to this equipment. Such modifications or change could void the user’s authority to operate the equipment. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: -- Reorient or relocate the receiving antenna. -- Increase the separation between the equipment and receiver. -- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. -- Consult the dealer or an experienced radio/TV technician for help. RF warning statement: The device has been evaluated to meet general RF exposure requirement. The device can be used in portable exposure condition without restriction. - 18 - Shenzhen Silver Star Intelligent Electronic Co., Ltd Address: Block D, Huiqing Technical Park, Dafu Industrial Zone, Aobei Community, Guanlan Street, Baoan District, Shenzhen City Http://www. yxrobot.com
Source Exif Data:
File Type : PDF File Type Extension : pdf MIME Type : application/pdf PDF Version : 1.4 Linearized : No Title : VILEDA机器常规性能测试报告模板2.xlsx Author : qcd_test2 Creator : pdfFactory Pro www.fineprint.cn Producer : pdfFactory Pro 3.50 (Windows 7 Chinese (Simplified)) Create Date : 2017:11:13 16:09:24+08:00 Page Count : 20EXIF Metadata provided by EXIF.tools