Simplicity 1694847 Parts Manual Large Frame Snowthrowers
1694914 to the manual fece7532-c54d-42cc-948d-9510bc866914
2014-12-13
: Simplicity Simplicity-1694847-Parts-Manual-127346 simplicity-1694847-parts-manual-127346 simplicity pdf
Open the PDF directly: View PDF 
.
Page Count: 44
| Download | |
| Open PDF In Browser | View PDF |
Parts Manual Large Frame Walk-Behind Snowthrowers 9.5HP Snowthrowers Mfg. No. Description 1694867 1694914 9560E, 9.5HP Snowthrower 9560EX, 9.5HP Snowthrower (CE) 10.5HP Snowthrowers Mfg. No. Description 1694847 1694848 10560E, 10.5HP Snowthrower 10560EX, 10.5HP Snowthrower (CE) 11.5HP Snowthrowers Mfg. No. Description 1694849 1694850 11570E, 11.5HP Snowthrower E11570, 11.5HP Snowthrower (CE) 13HP Snowthrowers Mfg. No. Description 1694851 1694852 1694872 1694915 1380E, 13HP Snowthrower E1380, 13HP Snowthrower (CE) 1390E, 13HP SnowThrower 1390EX, 13HP SnowThrower (CE) Part No.: 1732356 Rev. 11/2005 TP 400-4250-00-LW-S Table Of Contents PRODUCT COMPONENTS PAGES Handles and Controls Group - Channel .............................................................................................................. Handles and Controls Group ............................................................................................................................... Engine and Frame Group .................................................................................................................................... Engine and Frame Group with Power Boost ....................................................................................................... Auger and Impeller Group .................................................................................................................................... Auger Housing and Chute Group - 24, 28 & 32 inch ........................................................................................... Auger Housing and Chute Group - 38" Models ................................................................................................... Traction Drive Group ............................................................................................................................................ Wheels & Tires Group .......................................................................................................................................... Decal Group ......................................................................................................................................................... Headlight Group ................................................................................................................................................... 4 8 12 16 20 24 28 32 36 38 40 Torque Specification Chart ..................................................................... Inside Back Cover Handles and Controls Group - Channel 987044 NOTE: Unless noted otherwise, use the standard hardware torque specification chart. 11 10 2 1 Linkage adjustment for traction and auger drive with power boost: with drive levers engaged, the bottom end of lower rods (Ref. 40 & 66) should be flush with bottom of springs (Ref. 39 & 68). 8 4 12 9 5 3 13 7 6 14 15 16 17 18 19 69 71 72 20 4 12 22 4 64 56 6 9 24 12 21 66 23 5 4 70 69 68 28 25 26 38 30 31 67 65 63 Shift rod assembly (Ref. 71) must pivot freely on pivot blocks (Ref. 21). 37 29 39 35 27 34 56 32 33 Mount clutch cable to cable support, see Engine & Frame. 62 62 56 61 36 34 40 Torque to 19 - 29 ft-lbs. See Auger Housing and Chute Group - 38" 39 43 42 44 53 To engine ground 60 Mount bushings (Ref. 78) with flange on inside of brackets, 3 places. 58 59 42 39 To engine plug 44 55 49 41 48 47 45 39 46 50 54 To headlight 51 56 To spout motor 57 Slot towards rear of unit. The holes in the frame for Ref. 51 are slotted so the gear support (Ref. 45) can be positioned to ensure the inside surface of the gear support is tight against the hub of the front gear (Ref. 50). 52 The above parts group applies to the following Mfg. Nos.: 1694847 - 10560E 1694848 - 10560EX 1694849 - 11570E 1694850 - E11570 1694851 - 1380E 1694852 - E1380 1694872 - 1390E 1694915 - 1390EX © Copyright 2005 Simplicity Manufacturing, Inc. All Rights Reserved. 4 TP 400-4250-00-LW-S Handles and Controls Group - Channel REF NO PART NO. 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 1727128 1668608 1928732 1729104 1725205A 1960471 1705899 1726317 1723965 1667800C 1724489 1925592 1930641 1935450 1933689 1678579 1705898 1701342 1960686 1729855C 1723935A 1718791 1677453 1727127 1725702 1664022 2834683 1933896 1678392 1726728 1960589 7075909 1726727A 1960729 1728115 1707452 1960093 1714084 1667588 1715658 1718793 1718593 1918452 2816168 QTY. DESCRIPTION 1 2 1 5 2 4 1 2 2 1 1 6 4 4 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 6 1 1 1 1 4 1 1 2 1 2 HANDLE, Clutch R.H. GRIP, Handle Clutch, Black CAPSCREW, Hex Washer Head Taptite #10-24 x 1 BUSHING, 1/2 ID x 3/4 OD x 1/4, Plastic LEVER & TUBE ASSEMBLY, Clutch CAPSCREW, Hex Washer Head Taptite #12-24 x 1 GUIDE, Control GRIP, Black Soft 1 in. (24 in. & 28 in. Models Only) HAND GRIP, Heated 1 in. (32 & 38 in. Models Only) DASHBOARD PLUG, Button (38 in. Models Only) CAPSCREW, Hex Washer Head Taptite 1/4-20 x 3/4 NUT, Hex Flange Whiz Lock 1/4-20 CAPSCREW, Hex Washer Head, 1/4-20 x 3/4 G5 CAPSCREW, Hex Flange Whiz Lock, 5/16-18 x 1-1/2 SPACER, 21/64 ID x 13/16 OD x 15/16 LATCH, Control SPRING, Compression NUT, Hex Flange 5/16-18 ESNA HANDLE ASSEMBLY, Channel BRACKET, Shift Control CABLE & HANDLE ASSEMBLY, Clutch L.H. ROD, Control 2 in. Flat HANDLE, Clutch L.H. SCREW, Pan Head Torx #10 x 1/2 Thick Cut GROMMET, 1/2 CLIP, Wire NUT, Hex Lock 10-24 with Nylon Insert NC3B (Quantity 3 used no 32 in. models) SPACER, 17/64 ID x 3/8 OD x 21/64 CLIP, Clean Out Tool SCREW, Phillips #10-24 x 3/4 TOOL, Clean Out BRACKET, Clean Out Tool CAPSCREW, Hex Serrated Flange Tap, 5/16-18 x 1 CABLE ASSEMBLY, LH (Includes Ref. No. 36) SPRING, Extension 3-11/32 Long NUT, Push Pal (Used on all models Except 38 in. Models) KNOB, Spinner, Soft (Used on all modles Except 38 in. Models) BUSHING, 3/8 ID x 7/16 OD x 13/64, Nylon (Used on all models Except 38 in. Models) ROD, Chute Control, 27 in. Long (Used on all models Except 38 in. Models) SUPPORT, Gear (Used on all models Except 38 in. Models) GEAR, Powered Metal (Used on all models Except 38 in. Models) PIN, Cotter 1/8 x 1 (Used on all models Except 38 in. Models) PIN, Spring 1/8 x 3/4 (Used on all models Except 38 in. Models) Footnotes The above parts group applies to the following Mfg. Nos.: 1694847 - 10560E 1694848 - 10560EX 1694849 - 11570E 1694850 - E11570 1694851 - 1380E 1694852 - E1380 1694872 - 1390E 1694915 - 1390EX © Copyright 2005 Simplicity Manufacturing, Inc. All Rights Reserved. 5 TP 400-4250-00-LW-S Handles and Controls Group - Channel 987044 NOTE: Unless noted otherwise, use the standard hardware torque specification chart. 11 10 2 1 Linkage adjustment for traction and auger drive with power boost: with drive levers engaged, the bottom end of lower rods (Ref. 40 & 66) should be flush with bottom of springs (Ref. 39 & 68). 8 4 12 9 5 3 13 7 6 14 15 16 17 18 19 69 71 72 20 4 12 22 4 64 56 6 9 24 12 21 66 23 5 4 70 69 68 28 25 26 38 30 31 67 65 63 Shift rod assembly (Ref. 71) must pivot freely on pivot blocks (Ref. 21). 37 29 39 35 27 34 56 32 33 Mount clutch cable to cable support, see Engine & Frame. 62 62 56 61 36 34 40 Torque to 19 - 29 ft-lbs. See Auger Housing and Chute Group - 38" 39 43 42 44 53 To engine ground 60 Mount bushings (Ref. 78) with flange on inside of brackets, 3 places. 58 59 42 39 To engine plug 44 55 49 41 48 47 45 39 46 50 54 To headlight 51 56 To spout motor 57 Slot towards rear of unit. The holes in the frame for Ref. 51 are slotted so the gear support (Ref. 45) can be positioned to ensure the inside surface of the gear support is tight against the hub of the front gear (Ref. 50). 52 The above parts group applies to the following Mfg. Nos.: 1694847 - 10560E 1694848 - 10560EX 1694849 - 11570E 1694850 - E11570 1694851 - 1380E 1694852 - E1380 1694872 - 1390E 1694915 - 1390EX © Copyright 2005 Simplicity Manufacturing, Inc. All Rights Reserved. 6 TP 400-4250-00-LW-S Handles and Controls Group - Channel REF NO PART NO. 45 46 47 48 49 50 51 52 53 54 55 56 57 58 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 1960518 1960252 1960294 1725283 1668186 1611911 1931333 1960684 1723967 1923341 1724037 1960685 2172434 1725439 1728968 2825094 1722460 1666255 1931317 1726304 1728114 1713844 1714120 1960705 1668681 1668524 1924361 1674567 1960074 QTY. DESCRIPTION 2 2 2 1 1 1 1 1 1 1 1 4 1 1 1 3 1 1 2 1 1 1 1 1 1 2 1 1 1 NUT, Push for 1/4 Diameter Thread CARRIAGE BOLT, 1/4-20 x 5/8 G5 (Used on all models Except 38 in. Models) NUT, Hex Flange Whiz Lock, 1/4-20 Small (Used on all models Except 38 in. Models) ROD, Chute Worm, 18 Long (Used on all models Except 38 in. Models) WORM, Chute, L.H. (Used on all models Except 38 in. Models) SUPPORT, Worm (Used on all models Except 38 in. Models) CARRIAGE BOLT, 5/16-18 x 3/4 G5 (Used on all models Except 38 in. Models) NUT, Hex KEPS Conical Washer, 5/16-18 (Used on all models Except 38 in. Models) SWITCH, Hand Warmer (32 & 38 in. Models Only) CAPSCREW, Hex Head, 1/4-20 x 3/4 G5 (32 & 38 in. Models Only) RESISTOR BLOCK, Male Terminal (32 & 38 in. Models Only) NUT, Hex KEPS, 1/4-20 Conical Washer CLIP, Wire (Spout Rotator Models Only) HARNESS, Wiring (Handwarmer Models Only) HARNESS, Wiring (Handwarmer & Spout Rotator Models Only) TIE, Self Locking 7-5/16 (32 & 38 in. Models Only) PIN, Quick ROD, Lower Shift 15-21/64 Long CARRIAGE BOLT, 1/4-20 x 3/4 G5 ROD, Upper Shift 11-3/8 Long CABLE ASSEMBLY, RH KNOB, Hole ROD & CLEVIS ASSEMBLY, Shift CAPSCREW, Hex Flange Whiz Lock 1/4-20 x 2-1/4 WASHER, Curved BLOCK, Pivot, Powdered Metal WASHER, 1/2 ROD & ARM ASSEMBLY, Pivot CLIP, Hair Pin Footnotes The above parts group applies to the following Mfg. Nos.: 1694847 - 10560E 1694848 - 10560EX 1694849 - 11570E 1694850 - E11570 1694851 - 1380E 1694852 - E1380 1694872 - 1390E 1694915 - 1390EX © Copyright 2005 Simplicity Manufacturing, Inc. All Rights Reserved. 7 TP 400-4250-00-LW-S Handles and Controls Group 987161 NOTE: Unless noted otherwise, use the standard hardware torque specification chart. 7 8 Apply adhesive to secure grips. 9 10 12 11 15 5 Must slide freely in dash assembly (Ref 18). Apply lubricant as required. 22 16 6 14 17 23 13 3 21 20 Insert shift rod (Ref. 65) into outter hole of Ref. 68. 4 69 2 19 18 67 68 58 24 70 35 71 26 60 25 1 11 61 67 66 28 65 62 72 60 61 27 64 33 30 16 63 29 31 34 61 52 60 32 Shift rod assembly (Ref. 66) must pivot freely on pivot blocks, (Ref. 67). 35 45 36 43 37 59 58 29 39 40 Must pivot freely on capscrew (Ref 32). Apply lubricant as required. 38 19 57 41 44 56 53 Mount bushings (Ref. 19) with flange on inside of brackets, 3 places. 56 42 19 53 54 46 55 49 47 19 48 50 51 Slot towards rear of unit. 52 The holes in the frame for Ref. 48 are slotted so the gear support (Ref. 46) can be positioned to ensure the inside surface of the gear support is tight against the hub of the front gear (Ref. 56). The above parts group applies to the following Mfg. Nos.: 1694867 - 9560E 1694914 - 9560EX © Copyright 2005 Simplicity Manufacturing, Inc. All Rights Reserved. 8 TP 400-4250-00-LW-S Handles and Controls Group REF NO PART NO. 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 1726833 1731334A 1922127 1921221 1960671 1715654 1922837 1722638 1715655 1923358 1726317 1723965 1923341 1724037 1723967 1728968 1715956 1726983A 1667588 1714084 1960093 1722690 1722633 1960519 1722630 1722667 1731333A 1960662 1920397 1921319 1933896 1722631A 1718791 1725702 1726995 1726728 1960727 7075909 1720452 1726727A 1960730 1960729 1726832 1707452 QTY. DESCRIPTION 1 1 1 3 2 2 2 1 2 2 2 2 3 1 1 1 1 1 4 1 1 1 1 1 1 1 1 1 2 2 1 1 1 1 1 1 1 1 2 1 2 1 1 1 CABLE AND SPRING ASSEMBLY, R.H. Auger HANDLE, Tube, R.H. CAPSCREW, Hex Head, 5/16-18 x 1-3/4 G5 CAPSCREW, Hex Head, 5/16-18 x 1-1/2 G5 SCREW, Pan Head Torx, 1/4-20 x 3/4, Thread Cutting SPACER, 1/4ID x 25/64OD x 11/64LG CAPSCREW, Hex Head, 1/4-20 x 1-1/2 G5 HANDLE, Clutch R.H. SPACER NUT, Hex Centerlock, 1/4-20 GRIP HAND GRIP, Heated 1" Diameter CAPSCREW, Hex Head 1/4-20 x 3/4 G5 RESISTOR BLOCK, 2 Male Terminal SWITCH, Hand Warmer HARNESS, Wiring CLIP, Wire DASH AND SUPPORT ASSEMBLY, Tubular BUSHING, 47/125ID x 437/1000OD x 1/5LG KNOB, Spinner NUT, Push Pal, 3/8" Diameter Stud Capped SPRING, Complete ROD AND SPRING ASSEMBLY, w/Pin (Includes Ref. No. 24) PUSH NUT, Stud Cap, 1/2 ROD, 4/25" Diameter, E-Coat HANDLE, Clutch L.H. HANDLE, Tube, L.H. CAPSCREW, Hex Head, 1/4-20 x 2 G5 NUT, Hex Lock ESNA Light, 1/4-20NC-3B WASHER, 1/4 NUT, Hex Lock, 10-24 LEVER, Pivot CABLE AND HANDLE ASSEMBLY, Clutch SCREW, Pan Head Torx, #10 x 1/2 Thread Cut SPACER, 1-1/4 LG Beveled End CLIP, Snow Stick SCREW, Hex Flange Slot, #10-24 x 2-1/2 STICK, Snow Removal CLAMP, Saddle Snow Handle E-Coat BRACKET, Clean Out Tool CAPSCREW, Hex Head Serrated Flange Taptite, 5/16-18 x 2 G5 CAPSCREW, Hex Whiz Lock Flange, 5/16-18 x 1 CABLE AND SPRING ASSEMBLY, L.H. Traction (Includes Ref. No. 44) SPRING, Extension Footnotes The above parts group applies to the following Mfg. Nos.: 1694867 - 9560E 1694914 - 9560EX © Copyright 2005 Simplicity Manufacturing, Inc. All Rights Reserved. 9 TP 400-4250-00-LW-S Handles and Controls Group 987161 NOTE: Unless noted otherwise, use the standard hardware torque specification chart. 7 8 Apply adhesive to secure grips. 9 10 12 11 15 5 Must slide freely in dash assembly (Ref 18). Apply lubricant as required. 22 16 6 14 17 23 13 3 21 20 Insert shift rod (Ref. 65) into outter hole of Ref. 68. 4 69 2 19 18 67 68 58 24 70 35 71 26 60 25 1 11 61 67 66 28 65 62 72 60 61 27 64 33 30 16 63 29 31 34 61 52 60 32 Shift rod assembly (Ref. 66) must pivot freely on pivot blocks, (Ref. 67). 35 45 36 43 37 59 58 29 39 40 Must pivot freely on capscrew (Ref 32). Apply lubricant as required. 38 19 57 41 44 56 53 Mount bushings (Ref. 19) with flange on inside of brackets, 3 places. 56 42 19 53 54 46 55 49 47 19 48 50 51 Slot towards rear of unit. 52 The holes in the frame for Ref. 48 are slotted so the gear support (Ref. 46) can be positioned to ensure the inside surface of the gear support is tight against the hub of the front gear (Ref. 56). The above parts group applies to the following Mfg. Nos.: 1694867 - 9560E 1694914 - 9560EX © Copyright 2005 Simplicity Manufacturing, Inc. All Rights Reserved. 10 TP 400-4250-00-LW-S Handles and Controls Group REF NO PART NO. 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 1727088 1718793 1960518 1960252 1960294 1611911 1931333 1960684 2816168 1668186 1725283 1718593 1918452 1722460 1666255 1960685 1931317 1726304 1726734 1960705 1668523 1924361 1668524 1720240 1715123 1960074 1668185 1960686 QTY. DESCRIPTION 1 1 2 2 2 1 1 2 2 1 1 2 1 1 1 3 2 1 1 1 1 1 2 1 1 1 2 4 ROD, 3/8" Diameter, 26"LG, E-Coat SUPPORT, Gear NUT, Push for 1/4 Diameter Thread CARRIAGE BOLT, 1/4-20 x 5/8 G5 NUT, Hex Flange, 1/4-20, Whiz Lock Small SUPPORT, Worm CARRIAGE BOLT, 5/16-18 x 3/4 G5 NUT, Hex Keps, 5/16-18, Conical Washer PIN, Spring 1/8 x 3/4 WORM, Chute, L.H. ROD, 3/8" Diameter, Chute Worm E-Coat GEAR, Powdered Metal, Metafusion PIN, Cotter 1/4 x 1 PIN, Quick ROD, 3/4" Diameter NUT, Hex KEPS, 1/4-20, Conical Washer CARRIAGE BOLT, 1/4-20 x 3/4 G5 ROD, 3/4" Diameter, Shift Upper E-Coat, 11-19/50LG KNOB, Intermediate Thread, 3/8-16 SCREW, Hex Whiz Lock Flange, 1/4-20 x 2-1/4 ROD AND CLEVIS ASSEMBLY, Shift, Threaded WASHER, 1/2 BLOCK, Pivot, 3/4 x 3/4, Powdered Metal ROD AND ARM ASSEMBLY, Pivot SPRING, Torsion CLIP, Hair Pin BUSHING, 1/2ID x 3/4OD x 1/4LG NUT, Hex Flange, 5/16-18 ESNA Footnotes The above parts group applies to the following Mfg. Nos.: 1694867 - 9560E 1694914 - 9560EX © Copyright 2005 Simplicity Manufacturing, Inc. All Rights Reserved. 11 TP 400-4250-00-LW-S Engine and Frame Group 987035 NOTE: Unless noted otherwise, use the standard hardware torque specification chart. 15 Position idler pulley (Ref. 12) at center of slot in clutch arm (Ref. 10). 9 19 17 12 13 18 Hook one end of spring (Ref. 14) over clutch rod assembly (Ref. 10) between tabs and other end onto the tube handle capscrew (Ref. 20). 16 20 11 21 22 23 14 8 10 24 25 Long hub of idler pulley (Ref. 3) to be toward idler arm (Ref. 6). 1 4 3 27 26 8 25 30 14 7 31 2 6 5 29 32 33 28 Hook one end of spring (Ref. 7) into top hole of roller arm (Ref. 6) and other end into top hole of the idler arm assembly in the Traction Drive Group. 49 50 48 34 47 36 46 37 45 35 Torque to 10-14 ft. lbs. or 14-20 N m 29 37 42 35 44 35 43 35 38 41 Torque (4) Engine Bolts to 17 - 21 ft. lbs. or 23 - 29 N m 40 Right rear bolt. 39 The above parts group applies to the following Mfg. Nos.: 1694867 - 9560E 1694914 - 9560EX © Copyright 2005 Simplicity Manufacturing, Inc. All Rights Reserved. 12 TP 400-4250-00-LW-S Engine and Frame Group REF NO PART NO. QTY. DESCRIPTION 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 33 1700415 1928731 1668477 1960647 1665994 1703046A 1727149 1722460 1701257 1729646A 1928352 1726348 2860709 2159106 1725287 1935255 2820426 1918249 1724064 1921221 1726568C 1931317 1960685 1720404A 1930591 1664847 1726870C 1925003 1727004A 1927557 1929477 1725664A * * 1 1 4 1 1 1 1 2 1 1 1 1 1 1 1 2 2 2 1 1 1 2 2 1 4 4 1 2 1 4 3 1 1 1 34 35 36 37 38 39 40 41 42 43 1726942 1727033 1727032 2831277 1725326A 1935159 2821719 1727785 1919326 1917356 1 1 1 4 4 3 1 1 2 2 MV-BELT, 3L NUT, Hex, Toplock, Jam, 3/8-16 PULLEY, Idler SCREW, Hex Head, 3/8-16 x 1-1/2 PIN, Flat Head Drilled ARM, Idler, 5-3/4 LG SPRING, Extension PIN, Quick V-BELT, HA ROD AND ARM ASSEMBLY, Clutch, Brake NUT, Hex Flange, 3/8-16 Whiz Lock Large PULLEY, Idler CAPSCREW, Hex Whiz Lock Flange, 3/8-16 x 1-3/4 SPRING, Extension, 4-1/4 Long COVER, Belt NUT, Speed, 5/16-18, Lug Type LOCKWASHER, External Tooth, 5/16 SCREW, Truss head Slotted, 5/16-18 x 3/4 CORD, Electric Extension CAPSCREW, Hex Head, 5/16-18 x 1-1/2 G5 FRAME ASSEMBLY, Chain/Tube Handles CARRIAGE BOLT, 1/4-20 x 3/4 G5 NUT, Hex KEPS, 1/4-20, Conical Washer SUPPORT, Clutch Cable, 16GA SCREW, Hex Whiz Lock Flange, 5/16-18 x 3/4 CAPSCREW, Hex Washer Head Taptite, 5/16-18 x 3/4 COVER, Bottom Frame, 20GA SCREW, Hex Washer Head Taptite, 1/4-20 x 1/2 SUPPORT, Tie Bar NUT, Hex Flange, 5/16-18, Whiz Lock Large SCREW, Hex Washer Head Taptite, #10-24 x 1/2 GUARD, Muffler, 18GA ENGINE, 9.5HP B&S Electric Start Engine Model: 20A414 Engine Type: 0111E1 ENGINE, 9.5HP B&S Electric Start Engine (CE Models) Model: 20A414 Engine Type: 0113E1 HOSE, Oil Drain, w/Fittings SCREW, Muffler Deflector DEFLECTOR, Rain Guard, B&S Snow Muffler NUT, Hex Flange, 5/16-18, Whiz Lock Small SUPPORT, Engine Riser, 3/8" Thick, 1-1/4 x 4-31/50 CAPSCREW, Hex Whiz Lock Flange, 5/16-18 x 2-1/4 CAPSCREW, Hex Head, 5/16-18 x 2-1/2 G5 STOP, Belt WASHER, 5/16 LOCKWASHER, Spring, 5/16 Footnotes * See your local Briggs & Stratton distributor for Parts & Service. The above parts group applies to the following Mfg. Nos.: 1694867 - 9560E 1694914 - 9560EX © Copyright 2005 Simplicity Manufacturing, Inc. All Rights Reserved. 13 TP 400-4250-00-LW-S Engine and Frame Group 987035 NOTE: Unless noted otherwise, use the standard hardware torque specification chart. 15 Position idler pulley (Ref. 12) at center of slot in clutch arm (Ref. 10). 9 19 17 12 13 18 Hook one end of spring (Ref. 14) over clutch rod assembly (Ref. 10) between tabs and other end onto the tube handle capscrew (Ref. 20). 16 20 11 21 22 23 14 8 10 24 25 Long hub of idler pulley (Ref. 3) to be toward idler arm (Ref. 6). 1 4 3 27 26 8 25 30 14 7 31 2 6 5 29 32 33 28 Hook one end of spring (Ref. 7) into top hole of roller arm (Ref. 6) and other end into top hole of the idler arm assembly in the Traction Drive Group. 49 50 48 34 47 36 46 37 45 35 Torque to 10-14 ft. lbs. or 14-20 N m 29 37 42 35 44 35 43 35 38 41 Torque (4) Engine Bolts to 17 - 21 ft. lbs. or 23 - 29 N m 40 Right rear bolt. 39 The above parts group applies to the following Mfg. Nos.: 1694867 - 9560E 1694914 - 9560EX © Copyright 2005 Simplicity Manufacturing, Inc. All Rights Reserved. 14 TP 400-4250-00-LW-S Engine and Frame Group REF NO PART NO. 44 45 46 47 48 49 50 1921515 1922128 1916965 1922755 1726867 1726866 1726865 QTY. DESCRIPTION 2 1 1 1 1 1 1 CAPSCREW, Hex Head, 5/16-24 x 3/4 G5 CAPSCREW, Hex Head, 3/8-24 x 1-1/2 G8 LOCKWASHER, Spring, 3/8 WASHER, 3/8 PULLEY, Engine Outside, Powdered Metal PULLEY, Engine Middle, Powdered Metal PULLEY, Half Powdered Metal Footnotes * See your local Briggs & Stratton distributor for Parts & Service. The above parts group applies to the following Mfg. Nos.: 1694867 - 9560E 1694914 - 9560EX © Copyright 2005 Simplicity Manufacturing, Inc. All Rights Reserved. 15 TP 400-4250-00-LW-S Engine and Frame Group with Power Boost 987038 NOTE: Unless noted otherwise, use the standard hardware torque specification chart. 15 Position idler pulley (Ref. 12) at center of slot in clutch arm (Ref. 10). 9 19 17 12 13 Hook one end of spring (Ref. 14) over clutch rod assembly (Ref. 10) between tabs and other end into slot in frame. 18 16 20 11 21 22 23 24 14 8 10 25 21 Long hub of idler pulley (Ref. 3) to be toward idler arm (Ref. 6). 1 34 4 3 28 33 26 32 14 8 27 31 14 7 35 2 6 5 30 36 37 Hook one end of spring (Ref. 7) into top hole of roller arm (Ref. 6) and other end into top hole of the idler arm assembly in the Traction Drive Group. 58 56 29 59 57 55 54 53 52 50 38 51 40 49 41 39 Torque to 10-14 ft. lbs. or 14-20 N m 29 41 Right rear bolt. 46 35 48 35 47 35 42 45 Torque (4) Engine Bolts to 17 - 21 ft. lbs. or 23 - 29 N m 44 Position belt stops 1/16 - 1/8 from belt when auger clutch is engaged. 43 The above parts group applies to the following Mfg. Nos.: 1694847 - 10560E 1694848 - 10560EX 1694849 - 11570E 1694850 - E11570 1694851 - 1380E 1694852 - E1380 1694872 - 1390E 1694915 - 1390EX © Copyright 2005 Simplicity Manufacturing, Inc. All Rights Reserved. 16 TP 400-4250-00-LW-S Engine and Frame Group with Power Boost REF NO PART NO. 1 1 2 3 4 5 6 7 8 9 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 37 37 37 37 37 1700415 1672732 1928731 1668477 1960647 1665994 1703046A 1727149 1722460 1676460 1666655 1729646A 1928352 1726348 2860709 2159106 1725287 1935255 2820426 1918249 1724064 1666697 1930591 1726568C 1931317 1960685 1720404A 1664847 1930595 1726870C 1925003 1727004A 1927557 1919326 1923362 1702969 1929477 1725664A * * * * * * QTY. DESCRIPTION 1 1 1 1 1 1 2 1 1 1 1 1 1 1 1 1 1 2 2 2 1 1 4 1 2 2 1 4 4 1 2 1 4 1 1 1 3 1 1 1 1 1 1 1 V-BELT, 3L V-BELT, 3L (Used Only on 38 in. Models) NUT, Hex, Toplock, Jam, 3/8-16 PULLEY, Idler CAPSCREW, Hex Head, 3/8-16 x 1-1/2 PIN, Flat Head Drilled ARM, Idler, 5-3/4 LG SPRING, Extension PIN, Quick V-BELT, HA V-BELT, HA (Used Only on 38 in. Models) ROD AND ARM ASSEMBLY, Clutch Brake NUT, Hex Flange, 3/8-16 Whiz Lock Large PULLEY, Idler CAPSCREW, Hex Whiz Lock Flange, 3/8-16 x 1-3/4 SPRING, Extension COVER, Belt NUT, Speed, 5/16-18, Lug Type LOCKWASHER, External Tooth, 5/16 SCREW, Truss head Slotted, 5/16-18 x 3/4 CORD, Electric Extension SPACER CAPSCREW, Hex Whiz Lock Flange, 5/16-18 x 3/4 FRAME ASSEMBLY, Chain/Tube Handles CARRIAGE BOLT, 1/4-20 x 3/4 G5 NUT, Hex KEPS, 1/4-20, Conical Washer SUPPORT, Clutch Cable, 16GA CAPSCREW, Hex Washer Head Taptite, 5/16-18 x 3/4 CAPSCREW, Hex Whiz, 31/100-18 x 1-1/4 COVER, Bottom Frame, 20GA CAPSCREW, Hex Washer Head Taptite, 1/4-20 x 1/2 SUPPORT, Tie Bar NUT, Hex Flange, 5/16-18, Whiz Lock Large WASHER, Flat, 11/32 x 3/4 x 1/16 NUT, Hex Centerlock, 5/16-18 BELT STOP CAPSCREW, Hex Washer Head Taptite, #10-24 x 1/2 GUARD, Muffler, 18GA ENGINE, 10.5HP B&S Electric Start Model: 20E214 Type: 0110E1 ENGINE, 10.5HP B&S Electric Start (CE) Model: 20E214 Type: 0359E1 ENGINE, 11.5HP B&S Electric Start Model: 21C214 Type: 0110E1 ENGINE, 11.5HP B&S Electric Start (CE) Model: 21C216 Type: 0131E1 ENGINE, 13HP B&S Electric Start Model: 21A414 Type: 0112E1 ENGINE, 13HP B&S Electric Start (CE) Model: 21A414 Type: 0215E1 Footnotes * See your local Briggs & Stratton distributor for Parts & Service. The above parts group applies to the following Mfg. Nos.: 1694847 - 10560E 1694848 - 10560EX 1694849 - 11570E 1694850 - E11570 1694851 - 1380E 1694852 - E1380 1694872 - 1390E 1694915 - 1390EX © Copyright 2005 Simplicity Manufacturing, Inc. All Rights Reserved. 17 TP 400-4250-00-LW-S Engine and Frame Group with Power Boost 987038 NOTE: Unless noted otherwise, use the standard hardware torque specification chart. 15 Position idler pulley (Ref. 12) at center of slot in clutch arm (Ref. 10). 9 19 17 12 13 Hook one end of spring (Ref. 14) over clutch rod assembly (Ref. 10) between tabs and other end into slot in frame. 18 16 20 11 21 22 23 24 14 8 10 25 21 Long hub of idler pulley (Ref. 3) to be toward idler arm (Ref. 6). 1 34 4 3 28 33 26 32 14 8 27 31 14 7 35 2 6 5 30 36 37 Hook one end of spring (Ref. 7) into top hole of roller arm (Ref. 6) and other end into top hole of the idler arm assembly in the Traction Drive Group. 58 56 29 59 57 55 54 53 52 50 38 51 40 49 41 39 Torque to 10-14 ft. lbs. or 14-20 N m 29 41 Right rear bolt. 46 35 48 35 47 35 42 45 Torque (4) Engine Bolts to 17 - 21 ft. lbs. or 23 - 29 N m 44 Position belt stops 1/16 - 1/8 from belt when auger clutch is engaged. 43 The above parts group applies to the following Mfg. Nos.: 1694847 - 10560E 1694848 - 10560EX 1694849 - 11570E 1694850 - E11570 1694851 - 1380E 1694852 - E1380 1694872 - 1390E 1694915 - 1390EX © Copyright 2005 Simplicity Manufacturing, Inc. All Rights Reserved. 18 TP 400-4250-00-LW-S Engine and Frame Group with Power Boost REF NO PART NO. QTY. DESCRIPTION 38 39 40 41 42 43 1726942 1727033 1727032 2831277 1725326A 1935159 1 1 1 4 4 3 43 44 1921221 2821719 3 1 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 2822127 1731178 1919326 1917356 1921515 1701849 1702425 1701818 1726869 1726868 1922128 1916965 1922755 1726864 1726863 1701825 1 1 2 2 2 1 1 1 1 1 1 1 1 1 1 1 HOSE, Oil Drain, w/Fittings CAPSCREW, Muffler Deflector DEFLECTOR, Rain Guard, B&S Snow Muffler NUT, Hex Flange, 5/16-18, Whiz Lock Small SUPPORT, Engine Riser (Used on all models Except 38 in. Models) CAPSCREW, Hex Whiz Lock Flange, 5/16-18 x 2-1/4 (Used on all models Except 38 in. Models) CAPSCREW, Hex Head, 5/16-18 x 1-1/2 G5 (Used Only on 38 in. Models) CAPSCREW, Hex Head, 5/16-18 x 2-1/2 G5 (Used on all models Except 38 in. Models) CAPSCREW, Hex Head 5/16-18 x 1-3/4 G5 (Used Only on 38 in. Models) STOP, Belt WASHER, 5/16 LOCKWASHER, Spring, 5/16 CAPSCREW, Hex Head, 5/16-24 x 3/4 G5 SPRING, Compression SPRING, Compression WASHER, Thrust PULLEY HALF, Middle PULLEY HALF, Inside CAPSCREW, Hex Head, 3/8-24 x 1-1/2 G8 LOCKWASHER, Spring, 3/8 WASHER, 3/8 PULLEY HALF, Outside PULLEY HALF, Middle WICK, Felt, Oil Footnotes * See your local Briggs & Stratton distributor for Parts & Service. The above parts group applies to the following Mfg. Nos.: 1694847 - 10560E 1694848 - 10560EX 1694849 - 11570E 1694850 - E11570 1694851 - 1380E 1694852 - E1380 1694872 - 1390E 1694915 - 1390EX © Copyright 2005 Simplicity Manufacturing, Inc. All Rights Reserved. 19 TP 400-4250-00-LW-S Auger and Impeller Group 985466R1 NOTE: Unless noted otherwise, use the standard hardware torque specification chart. 35 End of hub to be flush with end of rolled down shaft (Ref. 9). 1 4 2 34 Torque to 30 -34 ft-lbs. 40 - 46 Nm. 36 15 5 10 7 6 2 14 16 10 17 10 15 18 12 19 9 3 8 11 Impeller to be positioned against bearing before tightening set screw. Marked side of worm gear must contact against left thrust washer to assure proper gear mesh. 13 6 21 20 30 Torque to 18-21 ft-lbs. 24 - 28 Nm. 22 Torque to 9 - 11 ft-lbs. 12- 15 Nm. 18 23 14 29 25 26 24 38" Models only. 27 Auger assembly stamped "R". 28 Apply grease until it appears at ends of auger assembly (2 places). 37 33 Auger assembly stamped "L". 31 32 The above parts group applies to the following Mfg. Nos.: 1694847 - 10560E 1694848 - 10560EX 1694849 - 11570E 1694850 - E11570 1694851 - 1380E 1694852 - E1380 1694867 - 9560E 1694872 - 1390E 1694914 - 9560EX 1694915 - 1390EX © Copyright 2005 Simplicity Manufacturing, Inc. All Rights Reserved. 20 TP 400-4250-00-LW-S Auger and Impeller Group REF NO PART NO. QTY. DESCRIPTION 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 1679293 1928721 1612187A 1960474 1612093 1612149 1612127 2836098 1612129 2818312 1612111 1612142 2168111 2118118 1930642 1612137 1612124 2118315 1731916 2830246 1612141 1612136 1923282 1960346 1 2 1 1 1 2 1 1 1 3 1 1 1 2 8 1 1 2 1 1 1 1 2 8 25 26 27 27 27 27 27 28 28 28 28 28 29 30 31 32 33 34 35 36 1668344 1918447 1718782A 1718784A 1718786A 1723945A 1731322A 1718783A 1718785A 1718787A 1723944A 1721321A 2821133 1668971 1921962 1723931 1920397 1931277 1931333 1723922A 2 2 1 1 1 1 1 1 1 1 1 1 2 1 2 2 2 2 2 1 PULLEY, w/Hub SCREW, Set Square Head Cup Point, 5/16-18 x 1/2 G8 IMPELLER ASSEMBLY SCREW, Set Square Head Cup Point, 3/8-16 x 1/2 G8 SEAL, Oil 1/4" Thick BUSHING, 377/500 ID x 1-1/10 OD x 1-1/100 LG Powerdered Metal COLLAR, Thrust 3/4 LG PIN, Drive Lock Type A 3/16 x 1-1/2 SHAFT, Worm 18-1/10 LG KEY, Woodruff, 47/250 x 5/8 TUBE, 9/10 OD 39/50 ID, 7-1/2 LG GEAR, Worm 1-3/8 LG WASHER, Thrust SEAL, Oil, 1/4" Thick NUT, Hex Flange, 1/4-20 Toplock Small (Uses Quantity of 6 on 28 adn 38 in. Models) CASE, Gear R.H. GASKET, Gear Case WASHER, Thrust SHAFT, 16 LG Auger 3 Holes KEY, Woodruff 1/4 x 3/4 GEAR, Worm 7/8 LG CASE, Gear L.H. CAPSCREW, Hex Head, 1/4-20 x 2-1/2 G5 (Used on 32 and 38 in. Modles) CAPSCREW, Hex Head, 1/4-20 x 2-1/4 G5 (Uses Quantity of 6 on 28 adn 38 in. Models) PIN, Flat Head Drilled PIN, Cotter 47/50 x 3/4 AUGER ASSEMBLY, L.H. 9-1/2 LG (Used on 24 in. Models) AUGER ASSEMBLY, L.H. 11-1/2 LG (Used on 28 in. Models) AUGER ASSEMBLY, L.H. 13-1/2 LG (Used on 32 in. Models) AUGER ASSEMBLY, L.H. 15-9/10 LG (without Burshing) (Used on 38 in. Models) AUGER ASSEMBLY, L.H. 15-9/10 LG (Includes Ref. No. 37) (Used on 38 in. Models) AUGER ASSEMBLY, R.H. 9-1/2 LG (Used on 24 in. Models) AUGER ASSEMBLY, R.H. 11-1/2 LG (Used on 28 in. Models) AUGER ASSEMBLY, R.H. 13-1/2 LG (Used on 32 in. Models) AUGER ASSEMBLY, R.H. 15-9/10 LG (without Bushing) (Used on 38 in. Models) AUGER ASSEMBLY, R.H. 15-9/10 LG (Includes Ref. No. 37) (Used on 38 in. Models) FITTING, Lube 1/4 Drive, No Check Ball FITTING, Pipe Plug, Square Head CAPSCREW, Hex Head, 1/4-20 x 1-3/4 G5 (Used on 38 in. Models) SHAFT, E-Coat, 5 LG (Used on 38 in. Models) NUT, Hex Lock ESNA Light, 1/4-20NC-3B (Used on 38 in. Models) NUT, Hex Flange, 5/16-18, Whiz Lock Small (Used on 32 and 38 in. Models) CARRIAGE BOLT, 5/16-18 x 3/4 G5 (Used on 32 and 38 in. Models) SUPPORT, Gear Box 10GA (Used on 38 in. Models) Footnotes The above parts group applies to the following Mfg. Nos.: 1694847 - 10560E 1694848 - 10560EX 1694849 - 11570E 1694850 - E11570 1694851 - 1380E 1694852 - E1380 1694867 - 9560E 1694872 - 1390E 1694914 - 9560EX 1694915 - 1390EX © Copyright 2005 Simplicity Manufacturing, Inc. All Rights Reserved. 21 TP 400-4250-00-LW-S Auger and Impeller Group 985466R1 NOTE: Unless noted otherwise, use the standard hardware torque specification chart. 35 End of hub to be flush with end of rolled down shaft (Ref. 9). 1 4 2 34 Torque to 30 -34 ft-lbs. 40 - 46 Nm. 36 15 5 10 7 6 2 14 16 10 17 10 15 18 12 19 9 3 8 11 Impeller to be positioned against bearing before tightening set screw. Marked side of worm gear must contact against left thrust washer to assure proper gear mesh. 13 6 21 20 30 Torque to 18-21 ft-lbs. 24 - 28 Nm. 22 Torque to 9 - 11 ft-lbs. 12- 15 Nm. 18 23 14 29 25 26 24 38" Models only. 27 Auger assembly stamped "R". 28 Apply grease until it appears at ends of auger assembly (2 places). 37 33 Auger assembly stamped "L". 31 32 The above parts group applies to the following Mfg. Nos.: 1694847 - 10560E 1694848 - 10560EX 1694849 - 11570E 1694850 - E11570 1694851 - 1380E 1694852 - E1380 1694867 - 9560E 1694872 - 1390E 1694914 - 9560EX 1694915 - 1390EX © Copyright 2005 Simplicity Manufacturing, Inc. All Rights Reserved. 22 TP 400-4250-00-LW-S Auger and Impeller Group REF NO PART NO. 37 1709894 QTY. DESCRIPTION 2 BUSHING, Plastic (Used on 38 in. Models) Footnotes The above parts group applies to the following Mfg. Nos.: 1694847 - 10560E 1694848 - 10560EX 1694849 - 11570E 1694850 - E11570 1694851 - 1380E 1694852 - E1380 1694867 - 9560E 1694872 - 1390E 1694914 - 9560EX 1694915 - 1390EX © Copyright 2005 Simplicity Manufacturing, Inc. All Rights Reserved. 23 TP 400-4250-00-LW-S Auger Housing and Chute Group - 24, 28 & 32 inch 987028 NOTE: Unless noted otherwise, use the standard hardware torque specification chart. 21 Decal must cover gap at hinge pivot. 20 11 25 5 14 12 4 19 22 7 6 17 18 13 3 2 Plastic washer (Ref. 2) goes between chute and deflector. 14 16 8 1 15 Mount cable bracket (Ref. 22) on right hand side of handle using shift control bracket hardware. 41 9 10 When installing cable, make sure it does not come into contact with muffler. 23 Coat top and bottom of chute ring with grease. 42 24 25 27 26 40 38 39 Scraper blade should be on inside of housing. 37 28 36 29 30 31 35 34 33 32 The above parts group applies to the following Mfg. Nos.: 1694847 - 10560E 1694848 - 10560EX 1694849 - 11570E 1694850 - E11570 1694851 - 1380E 1694852 - E1380 1694867 - 9560E 1694914 - 9560EX © Copyright 2005 Simplicity Manufacturing, Inc. All Rights Reserved. 24 TP 400-4250-00-LW-S Auger Housing and Chute Group - 24, 28 & 32 inch REF NO PART NO. QTY. DESCRIPTION 1 2 4 5 6 6 1931333 2860210 1960686 1670578 1704161C 1720671C 1 1 1 1 1 1 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 25 26 27 28 29 30 31 32 33 34 34 34 35 36 37 38 39 40 41 1706085 1960001 1667865 1666613 1702219 1960126 1611945 1611939 2825094 1720446 1611989 1719140 1719139 1719138 1960600 1726411A 1960738 1665982A 1729578 1930659 1663189 1665980 1668639C 1923325 1960687 1727854C 1709946A 1709947A 1709948A 1935048 1960711 1931277 1960699 1960684 1664847 1729642C 2 3 3 3 3 2 1 1 1 1 1 1 1 1 1 1 3 1 1 3 2 1 2 6 6 2 1 1 1 5 4 6 5 4 2 2 CARRIAGE BOLT, 5/16-18 x 3/4 G5 WASHER, Nylon NUT, Hex Flange ESNA Light, 5/16-18 (Used on all models Except 24 in. Models) KNOB, Internal Thread, 5/16 (Used Only on 24 in. Models) CHUTE AND DEFLECTOR ASSEMBLY, Manual (Used Only on 24 in. Models) CHUTE AND DEFLECTOR ASSEMBLY, w/Remote (Used on all models Except 24 in. Models) DECAL, Orange Strip SCREW, Hex Washer Head Pastite, 10-14 x 5/8 SPRING, Flat HOLD DOWN, Chute SPACER, 17/64 ID x 3/8 OD NUT, Push 1/4 ROD, Spring SPRING, Compression TIE, Self Locking (Used on all models Except 24 in. Models) CABLE AND KNOB ASSEMBLY, Chute (Includes Ref. No. 17, 18, 19, 20 & 21) BOOT, Bellows COLLET SEAL, Rod KNOB SCREW, 8-32 BRACKET, Cable CAPSCREW, Hex Head, 5/16-18 x 5/8 G5 RETAINER, Bearing BEARING, Ball NUT, Retainer Speed, 5/16-18 SPACER, Low BEARING, Flange CAP, Bearing, 3-3/4OD CAPSCREW, Hex Head 5/16-18 x 7/8 G5 NUT, Hex Flange 3/8-16 ESNA SKID SHOE, Reversible BLADE, Scraper, 24 in. BLADE, Scraper, 28 in. BLADE, Scraper, 32 in. NUT, Hex Flange, 5/16-18, Two-Way Lock GA (Quantity 7 Only on 32 in. Models) CARRIAGE BOLT, 3/8-16 x 3/4 NUT, Hex Flange, 5/16-18 CARRIAGE BOLT, 5/16-18 x 5/8 G5 (Quantity 7 Only on 32 in. Models) NUT, Hex Keps, 5/16-18, Conical Washer (Used on all models Except 24 in. Models) CAPSCREW, Hex Head, 5/16-18 x 3/4 G5 (Used on all models Except 24 in. Models) CUTTER, Drift, 1/4 in. Thick, 20LG (Used on all models Except 24 in. Models) Footnotes The above parts group applies to the following Mfg. Nos.: 1694847 - 10560E 1694848 - 10560EX 1694849 - 11570E 1694850 - E11570 1694851 - 1380E 1694852 - E1380 1694867 - 9560E 1694914 - 9560EX © Copyright 2005 Simplicity Manufacturing, Inc. All Rights Reserved. 25 TP 400-4250-00-LW-S Auger Housing and Chute Group - 24, 28 & 32 inch 987028 NOTE: Unless noted otherwise, use the standard hardware torque specification chart. 21 Decal must cover gap at hinge pivot. 20 11 25 5 14 12 4 19 22 7 6 17 18 13 3 2 Plastic washer (Ref. 2) goes between chute and deflector. 14 16 8 1 15 Mount cable bracket (Ref. 22) on right hand side of handle using shift control bracket hardware. 41 9 10 When installing cable, make sure it does not come into contact with muffler. 23 Coat top and bottom of chute ring with grease. 42 24 25 27 26 40 38 39 Scraper blade should be on inside of housing. 37 28 36 29 30 31 35 34 33 32 The above parts group applies to the following Mfg. Nos.: 1694847 - 10560E 1694848 - 10560EX 1694849 - 11570E 1694850 - E11570 1694851 - 1380E 1694852 - E1380 1694867 - 9560E 1694914 - 9560EX © Copyright 2005 Simplicity Manufacturing, Inc. All Rights Reserved. 26 TP 400-4250-00-LW-S Auger Housing and Chute Group - 24, 28 & 32 inch REF NO PART NO. 42 42 42 1729724C 1729726C 1729728C QTY. DESCRIPTION 1 1 1 HOUSING AND IMPELLER ASSEMBLY, 24 in. HOUSING AND IMPELLER ASSEMBLY, 28 in. HOUSING AND IMPELLER ASSEMBLY, 32 in. Footnotes The above parts group applies to the following Mfg. Nos.: 1694847 - 10560E 1694848 - 10560EX 1694849 - 11570E 1694850 - E11570 1694851 - 1380E 1694852 - E1380 1694867 - 9560E 1694914 - 9560EX © Copyright 2005 Simplicity Manufacturing, Inc. All Rights Reserved. 27 TP 400-4250-00-LW-S Auger Housing and Chute Group - 38" Models 987050 NOTE: Unless noted otherwise, use the standard hardware torque specification chart. 19 18 7 10 25 14 11 17 20 8 6 15 9 12 16 5 13 14 4 21 Plastic washer (Ref. 3) place between chute and deflector. 3 Mount cable bracket (Ref. 20) on right hand side of handle using shift control bracket hardware. 2 1 When installing cable, make sure it does not come into contact with muffler. 22 46 45 23 44 25 See Handles and Controls group for Wiring Harness. 24 28 26 27 29 43 30 42 Coat top and bottom of chute ring with grease. 2 31 40 41 32 39 33 34 35 Scraper blade should be on inside of housing. 38 36 37 The above parts group applies to the following Mfg. Nos.: 1694872 - 1390E 1694915 - 1390EX © Copyright 2005 Simplicity Manufacturing, Inc. All Rights Reserved. 28 TP 400-4250-00-LW-S Auger Housing and Chute Group - 38" Models REF NO PART NO. 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 1960001 1931333 2860210 1960686 1923341 1726992A 1724210 1933896 1731435C 1702219 1960126 1611945 1611939 1720446 1611989 1719140 1719139 1719138 1960600 1726411A 2825094 1729645A 1925003 1728967 1960745 1728965 2860604 1960738 1665982A 1729578 1930659 2172279 2173934 2172278 1925205 1960687 1725747A 1723921A 1960702 1931277 1935048 1729734C 1664847 1729642C QTY. DESCRIPTION 3 10 1 1 1 1 1 2 1 3 2 1 1 1 1 1 1 1 1 1 1 1 2 1 4 1 3 9 1 1 3 2 2 2 6 4 2 1 4 15 9 1 4 2 SCREW, Hex Washer Head Pastite, 10-14 x 5/8 CARRIAGE BOLT, 5/16-18 x 3/4 G5 WASHER, Special, 97/250ID x 1-3/25OD x 3/100 Thick NUT, Hex Falnge ESNA, 5/16-18 SCREW, Hex Whiz Lock, 1/4-20 x 3/4 BRACKET, Mounting Switch SWITCH, Rocker Chute NUT, Hex Nylon 10-24 CHUTE AND DEFLECTOR ASSEMBLY SPACER, Heat Treated NUT, Push Pal, 1/4" Diameter Stud Capped ROD, 5/16" Diameter, Spring Guide SPRING, Complete CABLE AND KNOB ASSEMBLY, Chute (Includes Ref. No. 18, 19, 20, 21 & 22) BOOT, Bellows COLLET SEAL, Rod KNOB SCREW, 8-32 SUPPORT, Cable TIE, Self Locking COVER, Pinion, 18GA CAPSCREW, Hex Washer Head Taptite, 1/4-20 x 1/2 PINION, 1-3/20 LG NUT, Hex KEPS, #10-24 MOTOR, Electric SCREW, Hex Washer Head Slot, #10-24 x 1-1/4 CAPSCREW, Hex Head Whiz Lock, 5/16-18 x 3/4 RETAINER, Bearing BEARING, Ball NUT, Retainer Speed, 5/16-18 FLANGE, Bearing, w/Fitting BEARING, Cartridge FLANGE, Bearing, 3/8" Deep CAPSCREW, Hex head, 5/16-18 x 5/8 NUT, Hex Flange, 3/8-16 ESNA SKID SHOE, 7GA Formed, Heat Treated BLADE, Scraper, 35-3/4 for 38" CARRIAGE BOLT, 3/8-16 x 1 G5 NUT, Hex Flange Whiz Lock, 5/16-18 NUT, Flange Lock, 5/16-18 HOUSING AND IMPELLER ASSEMBLY, 38" CAPSCREW, Hex Washer Head Taptite, 5/16-18 x 3/4 G5 CUTTER, Drift, Red Footnotes The above parts group applies to the following Mfg. Nos.: 1694872 - 1390E 1694915 - 1390EX © Copyright 2005 Simplicity Manufacturing, Inc. All Rights Reserved. 29 TP 400-4250-00-LW-S Auger Housing and Chute Group - 38" Models 987050 NOTE: Unless noted otherwise, use the standard hardware torque specification chart. 19 18 7 10 25 14 11 17 20 8 6 15 9 12 16 5 13 14 4 21 Plastic washer (Ref. 3) place between chute and deflector. 3 Mount cable bracket (Ref. 20) on right hand side of handle using shift control bracket hardware. 2 1 When installing cable, make sure it does not come into contact with muffler. 22 46 45 23 44 25 See Handles and Controls group for Wiring Harness. 24 28 26 27 29 43 30 42 Coat top and bottom of chute ring with grease. 2 31 40 41 32 39 33 34 35 Scraper blade should be on inside of housing. 38 36 37 The above parts group applies to the following Mfg. Nos.: 1694872 - 1390E 1694915 - 1390EX © Copyright 2005 Simplicity Manufacturing, Inc. All Rights Reserved. 30 TP 400-4250-00-LW-S Auger Housing and Chute Group - 38" Models REF NO PART NO. 45 46 1666613 1717477A QTY. DESCRIPTION 3 1 HOLD DOWN, Chute GEAR, Chute Footnotes The above parts group applies to the following Mfg. Nos.: 1694872 - 1390E 1694915 - 1390EX © Copyright 2005 Simplicity Manufacturing, Inc. All Rights Reserved. 31 TP 400-4250-00-LW-S Traction Drive Group 987054 NOTE: Unless noted otherwise, use the standard hardware torque specification chart. Mounted inside of frame. 2 Pack groove with grease. 3 4 1 5 2 3 13 Lubricate with 5W 50 Synthetic oil. 12 6 14 7 Apply loctite (2 places). 8 20 1 Hook end to top left corner slot of frame. 11 10 Mount to bracket in frame weldment. Apply Loctite and• Torque to 55 - 60 in-lbs. when all parts are against hub. 9 21 18 Mounted outside of frame. 23 19 Mounted outside of frame. 15 24 16 25 15 27 17 8 1 60 30 22 3 26 Grease I.D. teeth• and flange. 2 31 32 3 1 Be sure tie bar support is in place. Move axle to left (as viewed from back) to take up end play. Move set collar (Ref. 49) to right to remove end play in pivot arm (Ref. 40). Torque set screw (Ref. 43) to 10 - 14 ft-lbs. 28 29 20 48 Mounted outside of frame. 2 41 42 49 Apply grease to bearing areas. 43 44 Mount in hole at upper rear corner of frame. 33 Must pivot freely. 26 34 45 46 35 36 40 50 39 Torque to• 18 - 21 ft-lbs. 38 55 39 52 50 Torque to 10 - 14 ft-lbs. Assemble Ref. 40, 44 & 51 with no end play. Parts must rotate freely. 51 37 56 47 Apply anti-seize compound to wheel hub area of Ref. 49 & 57. 46 53 58 33 59 26 54 57 Grease bearing area of Ref. 57. The above parts group applies to the following Mfg. Nos.: 1694847 - 10560E 1694848 - 10560EX 1694849 - 11570E 1694850 - E11570 1694851 - 1380E 1694852 - E1380 1694867 - 9560E 1694872 - 1390E 1694914 - 9560EX 1694915 - 1390EX © Copyright 2005 Simplicity Manufacturing, Inc. All Rights Reserved. 32 TP 400-4250-00-LW-S Traction Drive Group REF NO PART NO. 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 1930601 1667341 1722703 1726856 1921332 1725428 1665995 1960684 1960687 1669256 1666114 1924940 1923701 1668255 1678956 1666207 1667335 1724333 1726931 2860164 1718752 1720298 1718689 1720078A 2827732 1960114 1718688 1679556 1667330 1666980 1718687 1921333 1960686 1700473 1666106 1919326 1922127 1726467 1722460 1725666 1719879 2818312 1924366 1670849 QTY. DESCRIPTION 8 4 4 1 3 1 1 6 1 1 1 1 1 1 2 1 1 2 1 4 1 1 1 1 1 3 1 1 1 1 1 3 2 1 1 1 1 1 1 1 1 1 1 1 SCREW, Hex Washer Head Taptite, 5/16-18 x 5/8 RETAINER, Bearing BEARING, Ball SHAFT, Hex CAPSCREW, Hex Head, 5/16-18 x 3/4 G5 DISC, Friction with Insert HUB, Friction Disc NUT, Hex Keps, 5/16-18, Conical Washer NUT, Hex Flange, 3/8-16 ESNA ARM ASSEMBLY, Shift w/Bushing BUSHING, 19/50 ID x 3/4 OD x 1-3/100 LG WASHER, 3/8 CAPSCREW, Hex Head, 3/8-16 x 2 G5 SPRING, Extension COLLAR, Thrust PIN, Loop COLLAR, Set SCREW, Set Square Head Cup Point, 1/4-20 x 1/2 SPROCKET, 10 Tooth WASHER, 5/8 JACKSHAFT, Double D SPRING, Complete CLUTCH, Sliding, 1/5LG, Powdered Metal ARM, Clutch RING, Retaining Extension WASHER, 3/4 GEAR, Stationary Clutch SPACER, Heat Treated, 31/100 LG SPROCKET CHAIN, Roller GEAR, Double D CAPSCREW, Hex Head, 5/16-18 x 1 G5 NUT, Hex Flange, 5/16-18 ESNA BELLCRANK BUSHING, 11/32 ID x 3/4 OD x 1-3/50 LG WASHER, 11/32 x 3/4 x 1/16 CAPSCREW, Hex Head, 5/16-18 x 1-3/4 G5 ROD, Pivot, 9-15/100 LG PIN, Quick SPRING, Extension DRIVE DISC with SPINDLE KEY, Woodruff, 47/250 x 5/8 WASHER, 5/8 ARM, Pivot with Bushings & Bearings (Includes Ref. Nos 45, 46, 47 & 48) Footnotes The above parts group applies to the following Mfg. Nos.: 1694847 - 10560E 1694848 - 10560EX 1694849 - 11570E 1694850 - E11570 1694851 - 1380E 1694852 - E1380 1694867 - 9560E 1694872 - 1390E 1694914 - 9560EX 1694915 - 1390EX © Copyright 2005 Simplicity Manufacturing, Inc. All Rights Reserved. 33 TP 400-4250-00-LW-S Traction Drive Group 987054 NOTE: Unless noted otherwise, use the standard hardware torque specification chart. Mounted inside of frame. 2 Pack groove with grease. 3 4 1 5 2 3 13 Lubricate with 5W 50 Synthetic oil. 12 6 14 7 Apply loctite (2 places). 8 20 1 Hook end to top left corner slot of frame. 11 10 Mount to bracket in frame weldment. Apply Loctite and• Torque to 55 - 60 in-lbs. when all parts are against hub. 9 21 18 Mounted outside of frame. 23 19 Mounted outside of frame. 15 24 16 25 15 27 17 8 1 60 30 22 3 26 Grease I.D. teeth• and flange. 2 31 32 3 1 Be sure tie bar support is in place. Move axle to left (as viewed from back) to take up end play. Move set collar (Ref. 49) to right to remove end play in pivot arm (Ref. 40). Torque set screw (Ref. 43) to 10 - 14 ft-lbs. 28 29 20 48 Mounted outside of frame. 2 41 42 49 Apply grease to bearing areas. 43 44 Mount in hole at upper rear corner of frame. 33 Must pivot freely. 26 34 45 46 35 36 40 50 39 Torque to• 18 - 21 ft-lbs. 38 55 39 52 50 Torque to 10 - 14 ft-lbs. Assemble Ref. 40, 44 & 51 with no end play. Parts must rotate freely. 51 37 56 47 Apply anti-seize compound to wheel hub area of Ref. 49 & 57. 46 53 58 33 59 26 54 57 Grease bearing area of Ref. 57. The above parts group applies to the following Mfg. Nos.: 1694847 - 10560E 1694848 - 10560EX 1694849 - 11570E 1694850 - E11570 1694851 - 1380E 1694852 - E1380 1694867 - 9560E 1694872 - 1390E 1694914 - 9560EX 1694915 - 1390EX © Copyright 2005 Simplicity Manufacturing, Inc. All Rights Reserved. 34 TP 400-4250-00-LW-S Traction Drive Group REF NO PART NO. 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 1665521 1666425 1666855 1666001 1720299 1928721 1672595A 1919394 1729254 1720300 1930570 2812808 1730228 2860169 1720305 2172206 QTY. DESCRIPTION 1 2 1 1 1 2 1 1 1 1 1 1 1 1 1 1 BEARING, Ball BUSHING, 3/4 ID x 1 OD x 3/4 LG, Powder Metal BUSHING, 5/8 ID x 13/16 OD x 3/4 LG, Powder Metal BUSHING, 377/100 ID x 1-13/100 OD x 1 LG, Powdered Metal AXLE, Round SCREW, Set Square Head Cup Point, 5/16-18 x 1/2 G8 PULLEY AND HUB ASSEMBLY WASHER, 1 COLLAR, Set GEAR AND HUB ASSEMBLY, RH CAPSCREW, Hex Head, 5/16-18 x 1-1/2 G8 FITTING, Lube 1/4-28, Tappered with Check Ball GEAR AND HUB ASSEMBLY, with Bushings WASHER, 1-47/250 BUSHING, 1-27/200 ID x 1-157/250 OD x 3/4 LG RING, Retaining External #87 Footnotes The above parts group applies to the following Mfg. Nos.: 1694847 - 10560E 1694848 - 10560EX 1694849 - 11570E 1694850 - E11570 1694851 - 1380E 1694852 - E1380 1694867 - 9560E 1694872 - 1390E 1694914 - 9560EX 1694915 - 1390EX © Copyright 2005 Simplicity Manufacturing, Inc. All Rights Reserved. 35 TP 400-4250-00-LW-S Wheels & Tires Group 986549 NOTE: Unless noted otherwise, use the standard hardware torque specification chart. 1 2 3 4 5 6 7 6 8 4 9 10 The above parts group applies to the following Mfg. Nos.: 1694847 - 10560E 1694848 - 10560EX 1694849 - 11570E 1694850 - E11570 1694851 - 1380E 1694852 - E1380 1694867 - 9560E 1694872 - 1390E 1694914 - 9560EX 1694915 - 1390EX © Copyright 2005 Simplicity Manufacturing, Inc. All Rights Reserved. 36 TP 400-4250-00-LW-S Wheels & Tires Group REF NO PART NO. 1 2 3 3 4 5 5 6 6 7 7 8 8 9 10 1921978 1919438 1726743 1726745 2172353 1714242 1722762 1727074 1727075 1726742 1726744 1720307 1722761 2153038 1666969 QTY. DESCRIPTION 1 1 1 1 2 1 1 2 2 1 1 1 1 2 1 CAPSCREW, Hex Head 5/16-18 x 2 G5 NUT, Hex Lock ESNA Light 5/16-18 NC-3B WHEEL & TIRE ASSEMBLY, Snow R.H. (Used on 24 & 28 in. Models) WHEEL & TIRE ASSEMBLY, Snow R.H. (Used on 32 & 38 in. Models) VALVE STEM & CAP ASSEMBLY, Air HUB, Wheel R.H., 3-3/4 Wide 8 Diameter 3/4 ID (Used on 24 & 28 in. Models) HUB, Wheel, 5-3/8 Wide 8 Diameter 3/4 ID (Used on 32 & 38 in. Models) TIRE, 4.80/4.00-8, X-TRAC TL (Used on 24 & 28 in. Models) TIRE, 16 x 6.5-8 X-TRAC TL (Used on 32 & 38 in. Models) WHEEL & TIRE ASSEMBLY, Snow L.H. (Used on 24 & 28 in. Models) WHEEL & TIRE ASSEMBLY, Snow L.H. (Used on 32 & 38 in. Models) HUB, Wheel L.H., 3-3/4 Wide 8 Diameter 1-1/8 ID (Used on 24 & 28 in. Models) HUB, Wheel 5-3/8 Wide 8 Diameter 1-1/8 ID (Used on 32 & 38 in. Models) TUBE, Tire PIN, KLIK, Ring Footnotes The above parts group applies to the following Mfg. Nos.: 1694847 - 10560E 1694848 - 10560EX 1694849 - 11570E 1694850 - E11570 1694851 - 1380E 1694852 - E1380 1694867 - 9560E 1694872 - 1390E 1694914 - 9560EX 1694915 - 1390EX © Copyright 2005 Simplicity Manufacturing, Inc. All Rights Reserved. 37 TP 400-4250-00-LW-S Decal Group 987131 NOTE: Unless noted otherwise, use the standard hardware torque specification chart. 1 3 2 Free Hand Locked Free Hand Unlocked WARNING Au ger Enga ge AVOID SERIOUS INJURY OR DEATH 1727020 Tract ion Engage Tract ion Disengage • Read the operator's manual for operating and safety • Always direct discharge chute so as to avoid instructions. injury to persons or damage to property. • Do not defeat the safety features of control. They are • Stop engine and disconnect spark plug wire for your protection. before servicing the unit. • Keep machine properly maintained and serviced with • When traction and auger controls are depressed, all shields, guards, and protective devices in place. the Free Hand ™ control is activated. This allows • Never allow children to operate snowthrower. the auger control to be released, yet auger • Keep area of operation clear of all persons, rotation will continue until the Free Hand control especially children. is released. 4 Au ger Disengage 3 1726946 1 1727021 1727023 5 4 2 5 6 6 7 6 8 7 8 9 10 9 11 10 12 13 11 1716532 15 16 14 15 The above parts group applies to the following Mfg. Nos.: 1694847 - 10560E 1694848 - 10560EX 1694849 - 11570E 1694850 - E11570 1694851 - 1380E 1694852 - E1380 1694867 - 9560E 1694872 - 1390E 1694914 - 9560EX 1694915 - 1390EX © Copyright 2005 Simplicity Manufacturing, Inc. All Rights Reserved. 38 TP 400-4250-00-LW-S Decal Group REF NO PART NO. 1 1 2 3 3 4 5 6 6 7 8 9 9 9 9 9 10 10 11 11 12 13 14 14 15 16 QTY. DESCRIPTION 1726945 1727022 1715557 1726946 1727023 1715558 1722867 1726947 1727024 1714245 1714246 1727019 1731195 1731196 1731197 1724075 7071880 1727207 1716532 1727208 * 1725507 * * 1720454 * 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 2 1 1 DECAL, Dashboard EZ Turn L.H. (Tube Handle Models Only) DECAL, Dashboard EZ Turn L.H. (CE) DECAL, 5 4 3 2 1 R1 R2, Shift Pattern (Tube Handle Models Only) DECAL, Auger Control R.H. (Tube Handle Models Only) DECAL, Auger Control R.H. (CE) DECAL, Simplicity (Tube Handle Models Only) DECAL, Handle Lubrication (Tube Handle Models Only) DECAL, Dashboard EZ Turn (Channel Handles) DECAL, Dashboard EZ Turn (Channel Handles) (CE) DECAL, 4 2 R1 Ground Speed, R.H. (Channel Handle Models Only) DECAL, 5 3 1 R2, Shift Pattern, L.H. (Channel Handle Models Only) DECAL, Stripe, 9560 DECAL, Stripe, 10560 DECAL, Stripe, 11570 DECAL, Stripe, 1380 DECAL, Stripe, 1390 DECAL, DANGER Chute Cleaning DECAL, WARNING Chute Cleaning (CE) DECAL, DANGER Avoid Injury from Auger DECAL, WARNING Impeller (CE) DECAL, OPEI Certified DECAL, Power Boost (Channel Handle Models Only) DECAL, Patent LABEL, Decibel, Power MASS (CE) DECAL, Touch Up Paint, Orange DECAL, Serial I.D. Tag Footnotes * Not a serviceable part. The above parts group applies to the following Mfg. Nos.: 1694847 - 10560E 1694848 - 10560EX 1694849 - 11570E 1694850 - E11570 1694851 - 1380E 1694852 - E1380 1694867 - 9560E 1694872 - 1390E 1694914 - 9560EX 1694915 - 1390EX © Copyright 2005 Simplicity Manufacturing, Inc. All Rights Reserved. 39 TP 400-4250-00-LW-S Headlight Group 986371 NOTE: Unless noted otherwise, use the standard hardware torque specification chart. 1 7 2 4 5 6 3 Existing Hardware The above parts group applies to the following Mfg. Nos.: 1694847 - 10560E 1694848 - 10560EX 1694849 - 11570E 1694850 - E11570 1694851 - 1380E 1694852 - E1380 1694872 - 1390E 1694915 - 1390EX © Copyright 2005 Simplicity Manufacturing, Inc. All Rights Reserved. 40 TP 400-4250-00-LW-S Headlight Group REF NO PART NO. 1 2 3 4 5 6 7 1725291 1701011 2834683 1709256A 1917372 1725292C 1931333 QTY. DESCRIPTION 1 2 1 1 1 1 1 HEADLIGHT ASEMBLY TIE, Self Locking CLIP, Wire LOCKWSHER, 5/16 NUT, Hex, 5/16-18 BRACKET CARRIAGE BOLT, 5/16-18 x 3/4 Footnotes The above parts group applies to the following Mfg. Nos.: 1694847 - 10560E 1694848 - 10560EX 1694849 - 11570E 1694850 - E11570 1694851 - 1380E 1694852 - E1380 1694872 - 1390E 1694915 - 1390EX © Copyright 2005 Simplicity Manufacturing, Inc. All Rights Reserved. 41 TP 400-4250-00-LW-S Hardware Identification & Torque Specifications Common Hardware Types Torque Specification Chart Hex Head Capscrew FOR STANDARD MACHINE HARDWARE (Tolerance ± 20%) Washer Hardware Grade Lockwasher Carriage Bolt No Marks SAE Grade 2 Hex Nut Size Of Hardware Standard Hardware Sizing 8-32 8-36 10-24 10-32 1/4-20 1/4-28 5/16-18 5/16-24 3/8-16 3/8-24 7/16-14 7/16-20 1/2-13 1/2-20 9/16-12 9/16-18 5/8-11 5/8-18 3/4-10 3/4-16 7/8-9 7/8-14 1-8 1-12 When a washer or nut is identified as 1/2”, this is the Nominal size, meaning the inside diameter is 1/2 inch; if a second number is present it represent the threads per inch When bolt or capscrew is identified as 1/2 - 16 x 2”, this means the Nominal size, or body diameter is 1/2 inch; the second number represents the threads per inch (16 in this example, and the final number is the body length of the bolt or screw (in this example 2 inches long). The guides and ruler furnished below are designed to help you select the appropriate hardware and tools. 0 1/4 Nut, 1/2” 1/2 Inside Diameter 3/4 1 1/4 1/2 3/4 Screw, 1/2 x 2 2 1/4 Body Diameter in/lbs ft/lbs 19 20 27 31 66 76 11 12 20 23 30 35 50 55 65 75 90 100 160 180 140 155 220 240 Nm. 2.1 2.3 3.1 3.5 7.6 8.6 15.0 16.3 27.2 31.3 40.8 47.6 68.0 74.8 88.4 102.0 122.4 136 217.6 244.8 190.4 210.8 299.2 326.4 SAE Grade 5 in/lbs ft/lbs 30 31 43 49 8 10 17 19 30 35 50 55 75 90 110 120 150 180 260 300 400 440 580 640 SAE Grade 8 Nm. in/lbs ft/lbs Nm. 3.4 3.5 4.9 5.5 10.9 13.6 23.1 25.8 40.8 47.6 68.0 74.8 102.0 122.4 149.6 163.2 204.0 244.8 353.6 408.0 544.0 598.4 788.8 870.4 41 43 60 68 12 14 25 27 45 50 70 80 110 120 150 170 220 240 386 420 600 660 900 1,000 4.6 4.9 6.8 7.7 16.3 19.0 34.0 34.0 61.2 68.0 95.2 108.8 149.6 163.2 204.0 231.2 299.2 326.4 525.0 571.2 816.0 897.6 1,244.0 1,360.0 NOTES 1. These torque values are to be used for all hardware excluding: locknuts, self-tapping screws, thread forming screws, sheet metal screws and socket head setscrews. 2. Recommended seating torque values for locknuts: a. for prevailing torque locknuts - use 65% of grade 5 torques. b. for flange whizlock nuts and screws - use 135% of grade 5 torques. 3. Unless otherwise noted on assembly drawings, all torque values must meet this specification. 1/2 Body Length 3/4 3 1/4 1/2 3/4 4 Wrench & Fastener Size Guide 1/4 5/16 3/8 1/4” Bolt or Nut Wrench—7/16” 5/16” Bolt or Nut Wrench—1/2” 3/8” Bolt or Nut Wrench—9/16” 7/16 DIA. 7/16” Bolt or Nut Wrench (Bolt)—5/8” Wrench (Nut)—11/16” 1/2 DIA. 1/2” Bolt or Nut Wrench—3/4” MANUFACTURING, INC. 500 N. Spring Street / PO Box 997 Port Washington, WI 53074-0997 USA www.simplicitymfg.com © Copyright 2005 Simplicity Manufacturing, Inc. All Rights Reserved. Printed In USA.
Source Exif Data:
File Type : PDF File Type Extension : pdf MIME Type : application/pdf PDF Version : 1.3 Linearized : No Page Mode : UseThumbs XMP Toolkit : 3.1-702 Producer : Acrobat Distiller 7.0.5 (Windows) Create Date : 2005:11:16 16:15:32-06:00 Creator Tool : PScript5.dll Version 5.2.2 Modify Date : 2005:11:18 15:25:13-06:00 Metadata Date : 2005:11:18 15:25:13-06:00 Document ID : uuid:6134bd89-36a2-4246-8e43-7fbb554ba002 Instance ID : uuid:dc2a28ce-0ccc-4edf-9b6b-4c6547484e54 Format : application/pdf Title : Large Frame Snowthrowers Creator : 200007 Description : Parts Manual Page Count : 44 Page Layout : TwoColumnRight Subject : Parts Manual Author : 200007EXIF Metadata provided by EXIF.tools