Sirius XM Radio XMCK20 XM Satellite RX and FM TX User Manual Layout 1

Sirius XM Radio Inc. XM Satellite RX and FM TX Layout 1

Quick Guide

The XM antenna contains a strong magnet, allowing it tostick to any metal parts of your vehicle.Step 1: Mounting the XM AntennaMount the XM antenna to the roof or trunk of the vehicle. During installation,make sure you are outdoors and the antenna is not obstructed by tall buildings.For best results mount the XM antenna to the outside of your vehicle. Below arethe recommended optionsXpressRFunctionsPPoowweerr BBuuttttoonnDDiissppllaayy Changes the way content isviewed on the display.LLeefftt aanndd RRiigghhtt AArrrroowwss Search for channels by category.55--wwaayy NNaavviiggaattiioonn KKnnoobb Previews channels; also se-lects various menu options.MMeennuu Access advanced featuresand configuration options.XXMM BBuuttttoonn Confirms selection for channeland menu items also press andhold to TuneSelect.PPrreesseett//DDiirreecctt Selects between direct channelentry and up to 30 presets.JJuummpp Switches betweencurrent channel andprevious channel.IInnffoo Displays either yourpersonal stock or infoextras information.NNuummbbeerr KKeeyyss Enter a channel di-rectly or select yourfavorite preset.Toggle right Toggle left Toggle up Toggle downPress center button(XM Button)Using the 5-way Navigation KnobVehicle InstallationMagnetoption 1option 2Keep excess cable behind or under the dashboard.Step 2: Installing the Vent Mount or Swivel MountInstalling the vent mountTo install the vent mount, find a horizon-tal vent that is strong enough to holdyour XpressRand car cradle. To removethe vent mount, push it into the vent andlift upwards slightly to release themount’s hooks from the vent vane.Some parts of the vent mount can be adjusted to better suityour vehicle’s vent. 1. Clean the mounting surfaces with the surface preparation kit.adhesive liner2. Peel away the adhesive liner and firmly press the swivel mount to the surface for 30 seconds. Allow 24 hours before using the mount.Step 3: How to receive XM through your car stereoThere are several methods of receiving XM through your car stereoCassette Adapter: Use the cassette adapter if your vehicle’s audio system has a built in cassetteplayer. The cassette adapter will provide the best audio quality.XM SureConnect: You can listen to your XpressRthrough your car stereo by using XpressR’s built-inFM modulator and the XM SureConnect. Simply find an unused FM frequency on the stereo and setyour XpressRto transmit on that same frequency. For XM SureConnect install, please see your XMSureConnect installation guide.Professional Wired: The third option is the FM Direct Adapter (sold separately). We recommendprofessional installation if you choose to use this method of install. Audio input: Some vehicles come with an audio input jack. If your vehicle has this type of inputyou can simply use a mini audio cable (sold separately).XM AntennaPower AdapterXM SureConnectCassette AdapterYou can use either the XM Sure-Connect, the cassette adapter,or a mini audio cable (not in-cluded) in the line out.XpressRCar CradleorPlug the antenna, the power adapter, and either the cassette adapter or the XM SureConnect into thecar cradle as shown. The FM Direct Adapter is not pictured. Once you have all of the cables correctly connected you can lock your XpressRinto the car cradle. 1. Unlock the car cradle locking mechanism 2. Slide your XpressRinto the car cradle until it is in place.3. Slide the locking mechanism into place. This ensures that your XpressRalways stays in place. 4. If you haven’t already done so, hook thecar cradle to the mount.You can adjust the tension of themount with a screwdriverIf you need to remove the mount, carefully lift the adhesive pad with your fingersor a spoon. Warming with a hair dryer for several minutes will help soften the ad-hesive. Your swivel mount comes with an extra adhesive pad.You can orient your swivel different ways to accommodate the space available in your vehicle.Installing the swivel mountTo install the swivel mount, first find a suitable location. The swivel mount’s adhesive is verystrong and may be difficult to remove. Do not install this mount on leather surfaces andmake sure the air temperature is at least 60°F (15°C).12345678852741963muteinfo menudisplay0jump p/d+XpressRCar CradleCar Power AdapterRemote ControlXM Car AntennaXM SureConnectCassette AdapterSwivel MountVent MountSwivel Mount Preparation KitWWaarrnniinnggssIWhen using this product it is always important to keep your eyes on the road and hands on thewheel. Not doing so could result in personal injury, death, and/or damage to your XpressRReceiver,accessories, and/or to your vehicle or other property.IXpressRshould be placed in your vehicle where it will not interfere with the function of safety fea-tures, e.g., deployment of airbags. Failure to correctly place XpressRmay result in injury to you orothers if the unit becomes detached during an accident and/or obstructs the deployment of anairbag.What’s in the Box?3300--MMiinnuuttee RReeppllaayy BBuuttttoonnssPause and replay up to 30minutes of live XM broadcast.The knob not only rotates, but it toggles. To toggle the knob, press on the edge and in thedirection you want to toggle.
quick guideXMCK20®FCC StatementPlease note that the power cable that has been supplied with your device is supplied with perma-nently attached ferrite beads. It is the responsibility of the user to use the power cable with the fer-rite beads.The user is cautioned that changes or modifications not expressly approved by XM Satellite RadioInc. can void the user’s authority to operate this device.This device complies with Part 15 of the FCC Rules. Operation is subject to the following two condi-tions:(1) This device may not cause harmful interference. (2) this device must accept any interference received, including interference that may cause undesired operation.This equipment has been tested and found to comply with the limits for a Class B digital device,pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protectionagainst harmful interference in a residential installation.This equipment generates, uses, and can radiate radio frequency energy and, if not installed andused in accordance with the installation instructions, may cause harmful interference to radio com-munications. However, there is no guarantee that interference will not occur in a particular installa-tion. If this equipment does cause harmful interference to radio or television reception, which canbe determined by turning the equipment off and on, the user is encouraged to try to correct theinterference by one or more of the following measures:- Reorient or relocate the receiving antenna of the affected receiver.- Increase the separation between the XM equipment and the affected receiver.- Connect the XM equipment into an outlet on a circuit different from that to which the affectedreceiver is connected.- Consult the dealer or an experienced radio/TV technician for help.Warning: The FCC and FAA have not certified this Satellite Radio Receiver for use in any aircraft(neither portable nor permanent installation). Therefore, XM Satellite Radio cannot support thistype of application or installation910 1112 13 14 15Basic ControlsTurn on your XpressR. Subscribe to XM if you haven’t done so already.SSeelleeccttiinngg CChhaannnneellssRotate knob to scroll through the list of channels. Press the “XM” button to select that channel. Youcan also set up XpressRso that you do not have to press the “XM” button to select a channel. See“Direct Tune” in your user guide.- OR –Press the number keys on your XpressRor the remote that correspond to the channel number.- OR –If you have channels assigned to presets, press a number key and XpressRwill tune to the channelassigned to that number.DDiirreecctt EEnnttrryy1. Press the p/d button until the word “Direct” appears in the display.2. Press the number keys corresponding to the channel number. For example, for channel 31, press3followed by 1. You can select the channel faster by pressing the XM button after entering the channel number.UUssiinngg PPrreesseettssThere are 30 presets in all; each bank (A, B, and C) holds 10 presets. Press the “p/d” button to selectthe proper bank. Use these banks to organize your favorite channels or to create separate presetbanks for additional users to enjoy. To set a channel to a preset:1. Tune to the desired channel.2. Press the p/d button until the appropriate “Preset” bank (Preset A, B, or C) appears in the display.3. Press and hold the number key that corresponds to the preset you would like to set. XpressRbeeps when the channel is stored.To select a stored preset:1. Press the p/d button until the appropriate “Preset” bank (Preset A, B, or C) appears in the display.2. Press one of the number keys. XpressRwill tune to that channel.DDiissppllaayyPress the display button to change the way you view the content on the display. There are 4 different display modes. Display mode 2 (single channel)Display mode 3 (split screen with 6 channels)DriveXM Cafe 45REM5:13DirectXM Cafe 45Fred 44Ethel 47Top Tracks 46Drive45REMXM Cafe XMU 43Direct All Channels5:14Display mode 4(split screen with previous channel)Display mode 1 (single channel large font)Take it Home74B.B. KingBluesvilleDirect Previous Channel5:1545XM CafeDriveREMREMDriveXM Cafe 453300--MMiinnuuttee RReeppllaayy30-Minute Replay gives you the opportunity to “hear that again.” This feature applies to the currentlistening session only. Turning your XpressRoff removes all tracks from the up-to-30 minute buffer.Both display modes 3 and 4 display a list of replayed tracks. To navigate through the "replay list", youcan either rotate the knob and press the XM button or press the replay buttons to make aselection.Navigating Replay1. Press the button. If a track has been playing for less than 5 seconds, XpressRrewinds to the beginning of the previous track. If the track has been playing for longer than 5 seconds, XpressRrewinds to the beginning of the current track. Upon entering the replay buffer, XpressRwill display “Replay” on the display.2. Pressing the button again skips backward to previous track in the order they played. XpressRallows you to access up to 30 minutes of previously listened to live broadcast. Press and hold for 3 seconds to skip to the beginning of your replay list. 3. Pressing the button skips forward in the track list.4. To exit 30-Minute Replay and return to the live XM broadcast, press and hold the button for 3 seconds; XpressRwill display “LIVE” on the display.To Pause a Track1. Press the button. The pause icon appears in the display.2. To resume playback from where you had paused, press the button again.3. To return to the live XM broadcast, press and hold the button until XpressRbeeps and displays “LIVE” on the screen.MMeennuu OOppttiioonnssWhen your XpressRis in the car cradle (and using either SureConnect or FM Direct accessory totransmit audio), and you press Menu, your display will look like this:Change DisplayChange DisplayFM ModulatorExitFactory Defaults Set TimeAntenna AimingChannel AccessInfo ExtrasStocksEdit AlertsNote: pressing the Menu or toggling the knob left, allows you to back out of any menu.For more information on Menu Options, please refer to your XpressRuser guide. CCuussttoommeerr SSuuppppoorrttActivate your XM subscription online http://activate.xmradio.com or by phone1 800 XM RADIO (1-800-967-2346 ) If your XpressRdoes not work the way you expect, first consult the troubleshooting section ofyour XpressRuser guide. If the problem persists please contact Listener Care at 1 800 XM RADIO(1-800-967-2346 ). Step 4: Making your Vehicle’s FM Radio an XM radio.Your XpressRcontains a built-in FM modulator that transmits the XM audio signal to your vehicle’sFM radio.First, turn on your car stereo. You will need to find a suitable FM frequency in order to get the bestsound. A suitable FM frequency is an unused frequency or weak station that is not located near astrong FM station in your area.Next, power on your XpressR. Be sure all of your cables are properly connected. Go to channel 1, thisis the preview channel. You will not hear any sound through your car stereo until you have chosenan FM Frequency. Press Menu ¨FM Modulator ¨FM Frequency.Match the frequency to the frequency you see onyour car’s FM radio88.388.188.788.988.5FM Modulator > FM FreqNow you should be able to hear your XpressRthrough your FM stereo. If you can’t hear any soundplease check all of your connections and be sure your XM antenna is not obstructedDisplay mode 2 (single channel)DriveXM Cafe 45REM4:30Direct3:11 3:35Displays elapsed time ofcurrent track within the re-play buffer.Displays total time ofcurrent track within thereplay buffer.Space between white bars representstracks within total replay session.Display updates asnew track begins.Replay Status Bar representsthe total replay session

Navigation menu