Sirius XM Radio XMCK20 XM Satellite RX and FM TX User Manual Layout 1

Download:
Mirror Download [FCC.gov]
Document ID	785079
Application ID	g3xqy2VZOik6K8VV4FvTxA==
Document Description	Quick Guide
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	179.56kB (2244440 bits)
Date Submitted	2007-04-26 00:00:00
Date Available	2007-06-05 00:00:00
Creation Date	2007-03-13 12:04:16
Producing Software	QuarkXPress(R) 7.1
Document Lastmod	2007-03-13 12:04:16
Document Title	Layout 1
Document Creator	QuarkXPress(R) 7.1

XpressR Functions
Warnings
Using the 5-way Navigation Knob
I When using this product it is always important to keep your eyes on the road and hands on the
The XM antenna contains a strong magnet, allowing it to
stick to any metal parts of your vehicle.
The knob not only rotates, but it toggles. To toggle the knob, press on the edge and in the
direction you want to toggle.
wheel. Not doing so could result in personal injury, death, and/or damage to your XpressR Receiver,
accessories, and/or to your vehicle or other property.
30-Minute Replay Buttons
Pause and replay up to 30
minutes of live XM broadcast.
I XpressR should be placed in your vehicle where it will not interfere with the function of safety fea-
tures, e.g., deployment of airbags. Failure to correctly place XpressR may result in injury to you or
others if the unit becomes detached during an accident and/or obstructs the deployment of an
airbag.
Magnet
Display
Changes the way content is
viewed on the display.
Power Button
What’s in the Box?
XM Button
Confirms selection for channel
and menu items also press and
hold to TuneSelect.
info
XpressR
display
menu
mute
jump
p/d
XM SureConnect
Swivel Mount
Car Cradle
Car Power Adapter
Number Keys
Enter a channel directly or select your
favorite preset.
Info
Displays either your
personal stock or info
extras information.
Jump
Switches between
current channel and
previous channel.
Installing the vent mount
5-way Navigation Knob
Previews channels; also selects various menu options.
Mount the XM antenna to the roof or trunk of the vehicle. During installation,
make sure you are outdoors and the antenna is not obstructed by tall buildings.
For best results mount the XM antenna to the outside of your vehicle. Below are
the recommended options
op
tio
op
tio
To install the vent mount, find a horizontal vent that is strong enough to hold
your XpressR and car cradle. To remove
the vent mount, push it into the vent and
lift upwards slightly to release the
mount’s hooks from the vent vane.
Pres et/Direct
Selects between direct channel
entry and up to 30 presets.
Some parts of the vent mount can be adjusted to better suit
your vehicle’s vent.
Keep excess cable
behind or under
the dashboard.
You can orient your swivel different ways to accommodate the space available in your vehicle.
To install the swivel mount, first find a suitable location. The swivel mount’s adhesive is very
strong and may be difficult to remove. Do not install this mount on leather surfaces and
make sure the air temperature is at least 60°F (15°C).
Plug the antenna, the power adapter, and either the cassette adapter or the XM SureConnect into the
car cradle as shown. The FM Direct Adapter is not pictured.
Once you have all of the cables correctly connected you can lock your XpressR into the car cradle.
1. Unlock the car cradle locking mechanism
2. Slide your XpressR into the car cradle
until it is in place.
3. Slide the locking mechanism into place. This
ensures that your XpressR always stays in place.
4. If you haven’t already done so, hook the
car cradle to the mount.
You can use either the XM SureConnect, the cassette adapter,
or a mini audio cable (not included) in the line out.
XpressR Car Cradle
You can adjust the tension of the
mount with a screwdriver
1. Clean the mounting surfaces with
the surface preparation kit.
Step 2: Installing the Vent Mount or Swivel Mount
Toggle down
Step 1: Mounting the XM Antenna
Swivel Mount Preparation Kit
Installing the swivel mount
Toggle up
Left and Right Arrows
Search for channels by category.
Vent Mount
XM Car Antenna
Toggle left
Vehicle Installation
Menu
Access advanced features
and configuration options.
Cassette Adapter
Remote Control
Press center button Toggle right
(XM Button)
If you need to remove the mount, carefully lift the adhesive pad with your fingers
or a spoon. Warming with a hair dryer for several minutes will help soften the adhesive. Your swivel mount comes with an extra adhesive pad.
XM Antenna
Step 3: How to receive XM through your car stereo
or
There are several methods of receiving XM through your car stereo
XM SureConnect
Cassette Adapter: Use the cassette adapter if your vehicle’s audio system has a built in cassette
player. The cassette adapter will provide the best audio quality.
2. Peel away the adhesive liner and firmly press the swivel mount to
the surface for 30 seconds. Allow 24 hours before using the
mount.
adhesive liner
XM SureConnect: You can listen to your XpressR through your car stereo by using XpressR’s built-in
FM modulator and the XM SureConnect. Simply find an unused FM frequency on the stereo and set
your XpressR to transmit on that same frequency. For XM SureConnect install, please see your XM
SureConnect installation guide.
Professional Wired: The third option is the FM Direct Adapter (sold separately). We recommend
professional installation if you choose to use this method of install.
Audio input: Some vehicles come with an audio input jack. If your vehicle has this type of input
you can simply use a mini audio cable (sold separately).
Cassette Adapter
Power Adapter
9
10
11
Step 4: Making your Vehicle’s FM Radio an XM radio.
Basic Controls
Using Presets
Your XpressR contains a built-in FM modulator that transmits the XM audio signal to your vehicle’s
FM radio.
Turn on your XpressR. Subscribe to XM if you haven’t done so already.
There are 30 presets in all; each bank (A, B, and C) holds 10 presets. Press the “p/d” button to select
the proper bank. Use these banks to organize your favorite channels or to create separate preset
banks for additional users to enjoy. To set a channel to a preset:
Selecting Channels
1. Tune to the desired channel.
First, turn on your car stereo. You will need to find a suitable FM frequency in order to get the best
sound. A suitable FM frequency is an unused frequency or weak station that is not located near a
strong FM station in your area.
Next, power on your XpressR. Be sure all of your cables are properly connected. Go to channel 1, this
is the preview channel. You will not hear any sound through your car stereo until you have chosen
an FM Frequency.
Press Menu ¨ FM Modulator
¨ FM Frequency.
Rotate knob to scroll through the list of channels. Press the “XM” button to select that channel. You
can also set up XpressR so that you do not have to press the “XM” button to select a channel. See
“Direct Tune” in your user guide.
- OR –
3. Press and hold the number key that corresponds to the preset you would like to set. XpressR
beeps when the channel is stored.
To select a stored preset:
Match the frequency to the frequency you see on
your car’s FM radio
2. Press the p/d button until the appropriate “Preset” bank (Preset A, B, or C) appears in the display.
Press the number keys on your Xpress or the remote that correspond to the channel number.
1. Press the p/d button until the appropriate “Preset” bank (Preset A, B, or C) appears in the display.
- OR –
2. Press one of the number keys. XpressR will tune to that channel.
®
If you have channels assigned to presets, press a number key and Xpress will tune to the channel
assigned to that number.
Display
FM Modulator > FM Freq
Press the display button to change the way you view the content on the display. There are 4
different display modes.
88.1
88.3
88.5
88.7
88.9
Direct Entr y
XM Cafe
1. Press the p/d button until the word “Direct” appears in the display.
Now you should be able to hear your XpressR through your FM stereo. If you can’t hear any sound
please check all of your connections and be sure your XM antenna is not obstructed
XM Cafe
5:14
Direct
All Channels
45 XMU
REM Fred
Drive XM Cafe
Top Tracks
Ethel
43
44
45
46
47
Previous Channel
74
45 Bluesville
B.B. King
REM
Take it Home
Drive
XM Cafe
Display mode 3 (split screen with 6 channels)
5:15
Display mode 4
(split screen with previous channel)
45
REM
Drive
Display mode 1
(single channel large font)
12
Direct
XM Cafe
REM
Drive
2. Press the number keys corresponding to the channel number. For example, for channel 31, press
3 followed by 1. You can select the channel faster by pressing the XM button after entering the
channel number.
5:13
Direct
45
quick guide
XMCK20
Display mode 2 (single channel)
13
14
FCC Statement
Menu Options
Navigating Replay
1. Press the button. If a track has been playing for less than 5 seconds, Xpress
rewinds to the beginning of the previous track. If the track has been playing for
longer than 5 seconds, XpressR rewinds to the beginning of the current track. Upon
entering the replay buffer, XpressR will display “Replay” on the display.
When your Xpress is in the car cradle (and using either SureConnect or FM Direct accessory to
transmit audio), and you press Menu, your display will look like this:
Change Display
Edit Alerts
Stocks
Info Extras
2. Pressing the button again skips backward to previous track in the order they
played. XpressR allows you to access up to 30 minutes of previously listened to live
broadcast. Press and hold for 3 seconds to skip to the beginning of your replay list.
3. Pressing the
FM Modulator
button skips forward in the track list.
Change Display
Channel Access
4. To exit 30-Minute Replay and return to the live XM broadcast, press and hold the
button for 3 seconds; XpressR will display “LIVE” on the display.
30-Minute Replay
Exit
30-Minute Replay gives you the opportunity to “hear that again.” This feature applies to the current
listening session only. Turning your XpressR off removes all tracks from the up-to-30 minute buffer.
To Pause a Track
1. Press the
Both display modes 3 and 4 display a list of replayed tracks. To navigate through the "replay list", you
can either rotate the knob and press the XM button or press the replay buttons to make a
selection.
Display mode 2 (single channel)
Display updates as
new track begins.
Direct
XM Cafe
Displays elapsed time of
current track within the replay buffer.
45
Drive
3:11
Space between white bars represents
tracks within total replay session.
3:35
Set Time
button. The pause icon appears in the display.
3. To return to the live XM broadcast, press and hold the
displays “LIVE” on the screen.
button again.
button until XpressR beeps and
Note: pressing the Menu or toggling the knob left, allows you to back out of any menu.
For more information on Menu Options, please refer to your XpressR user guide.
Customer Support
4:30
Activate your XM subscription online http://activate.xmradio.com or by phone
1 800 XM RADIO (1-800-967-2346 )
REM
Replay Status Bar represents
the total replay session
Antenna Aiming
Factory Defaults
2. To resume playback from where you had paused, press the
Displays total time of
current track within the
replay buffer.
15
If your XpressR does not work the way you expect, first consult the troubleshooting section of
your XpressR user guide. If the problem persists please contact Listener Care at 1 800 XM RADIO
(1-800-967-2346 ).
Please note that the power cable that has been supplied with your device is supplied with permanently attached ferrite beads. It is the responsibility of the user to use the power cable with the ferrite beads.
The user is cautioned that changes or modifications not expressly approved by XM Satellite Radio
Inc. can void the user’s authority to operate this device.
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
(1) This device may not cause harmful interference.
(2) this device must accept any interference received, including interference that may cause
undesired operation.
This equipment has been tested and found to comply with the limits for a Class B digital device,
pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection
against harmful interference in a residential installation.
This equipment generates, uses, and can radiate radio frequency energy and, if not installed and
used in accordance with the installation instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can
be determined by turning the equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
- Reorient or relocate the receiving antenna of the affected receiver.
- Increase the separation between the XM equipment and the affected receiver.
- Connect the XM equipment into an outlet on a circuit different from that to which the affected
receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
Warning: The FCC and FAA have not certified this Satellite Radio Receiver for use in any aircraft
(neither portable nor permanent installation). Therefore, XM Satellite Radio cannot support this
type of application or installation

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.4
Linearized                      : No
Page Count                      : 2
Modify Date                     : 2007:03:13 12:04:16
X Press Private                 : %%DocumentProcessColors: Cyan Magenta Yellow Black.%%EndComments
Creator                         : QuarkXPress(R) 7.1
Producer                        : QuarkXPress(R) 7.1
Create Date                     : 2007:03:13 12:04:16
Title                           : Layout 1

EXIF Metadata provided by EXIF.tools