Sirius XM Radio XMXRC1 XM Satellite RX and FM TX User Manual RC quick guide ai

Sirius XM Radio Inc. XM Satellite RX and FM TX RC quick guide ai

Contents

XpressRC Quick Guide

1What’s in the box23456 78Car Cradle852741963muteinfo menudisplay0jump fav+Remote ControlXM Car AntennaCassette AdapterSwivel MountVent MountSwivel Mount Preparation KitCar Power AdapterXpressRCsserpX RC functions 60-Minute Replay ButtonsPause and replay up to 60 minutes of live XM broadcast.JumpSwitches between current channel and previous channel.InfoDisplays either your personal stock or info extras information.Number Keys Enter a channel directly, select your favorite channels, or access songs saved in SongSaver.Power ButtonDisplayChanges the way content is viewed on the display.Left and Right Arrows Search for channels by category.5-way Navigation KnobPreviews channels; also selects various menu options.MenuAccess advanced features XM Buttonchannel and menu items, alsopress and hold to save a song to SongSaver or TuneSelect.FavSelects between direct channel entry, favorite channels, and SongSaver mode.Warnings- When using this product it is always important to keep your eyes on the road and hands on the wheel. Not doing so could result in personal injury, death, and/or damage to your XpressR Receiver, accessories, and/or to your vehicle or other property.- XpressR should be placed in your vehicle where it will not interfere with the function of safety features, e.g., deployment of airbags. Failure to correctly place XpressR may result in injury to you or others if the unit becomes detached during an accident and/or obstructs the deployment of an airbag.5-way navigation knobTurn the knob to scroll through a list. Press the center of the XM button to make a selection Press the edge of the knob to select display, jump, < or> Toggle right Toggle left Toggle up Toggle downPress center button(XM button)Vehicle InstallationStep 1: Mount the XM AntennaThe XM antenna contains a strong magnet which will stick to any metal parts of your vehicle. 1MagnetChoose the best location for your XM antenna considering your own personal situation. Pay particular attention to any accessories that you may have like luggage racks and how frequently you may use them. If you placed the XM antenna on the front of the vehicle, route the cable across the top of the windshield. Gently pry up the rubber weather seal and tuck the cable underneath. Follow the weather seal down to the door jam. Tuck the cable into the door jam and up to the dash or under the carpet to the car cradle as shown. If you placed the XM antenna on the rear of the vehicle, route the cable under the weather seal of the rear window. Route it into the trunk and through any existing wire passages or cargo passages to the rear passenger compartment. Tuck the cable under the door jam trim or under the carpet to the radio as shown. TIP! Always be careful to include enough slack in your cable to accommodate open doors or trunk lids. Use things typically found around the home, like electrical tape, to secure cables in areas so that hinges do not pinch the cable with the door. Hide any excess cable in the trim. Swivel MountVent MountStep 2: Install the vent or swivel mount You can use either the vent mount or the swivel mount for your XpressRC depending on your particular situation.Installing the vent mount 1 Locate a vent with horizontal slats sturdy enough to hold your XM cradle and radio. 2 t your vent. 3 Snap the mount onto the vent. To remove, push the mount into the vent, then lift up. Installing the swivel mount 1 at surface for the mount. Make sure there is ample room for the XM cradle and radio when installed. 2 Clean the surface with the preparation kit and let it dry thoroughly. the adhesive liner. Position, press, and hold the swivel mount in place for 30 seconds. IMPORTANT! Let the adhesive cure for 24 hours before attaching the XM cradle and radio to the mount. You can adjust this screw to adjust the tension of the mount with a screwdriver.ANT IN AUDIO OUTDC INXM AntennaPower AdapterCassette AdapterXpressRC Car CradleStep 3: Connect your XpressRC.Plug the antenna into ANT IN on the cradle. 2 1 3 Plug the power adapter into DC IN on the cradle. Plug the audio adapter into AUDIO OUT on the cradle. • Use the Cassette Adapter if your vehicle has a built-in cassette player. • Use a mini audio cable (sold separately) if your vehicle has an audio input jack. Insert the cradle into the mount. Insert your XpressRC into the cradle. NOTE! If your car does not contain a cassette player or an audio input, you will need to use either the XM SureConnect (sold separately) or the FM Direct adapter (sold separately). CAUTION! The adhesive used with the swivel mount may make it dicult t o remove. Do not install this mount on leather surfaces and make sure the air temperature is at least 60°F (15°C). Turn the swivel to accommodate the XM cradle and radio. Adjust the tension via the center screw.To remove, carefully lift the adhesive pad with your ngers or a spoon. Warming the pad with a hairdryer for several minutes will help soften the adhesive. You can reinstall the swivel mount using the extra adhesive pad. • XM SureConnect (sold separately): You can listen to your XpressRC through your car stereo by using XpressRC’s built-in FM modulator and the XM SureConnect. nd an unused FM frequency on the stereo and set your XpressRC to transmit on that same frequency. Refer to Set the FM frequency page in your user guide for more information • FM Direct Adapter (sold separately): This option directly connects the XpressRC to your car’s audio system and antenna. A professional installation is recommended if you choose to use this method
Quick Guide910 1112 13 14 15Step 4: Turn on your XpressRC. 1 1 Turn on your car radio. 2 2 Insert the cassette adapter. 3 3 Turn on your XpressRC. fav NOTE: You may experience a two-second delay and hear a short beep while your XpressRC powers up. If you press the power button during these two seconds, you will see a Please Wait message. NOTE: If you are using the XM SureConnect or the FM Direct adapter, refer to on page xxx for information. 1 Make sure your XpressRC is properly installed and receiving the XM signal so that you can hear the audio on channel 1. 2 nd it: • On XM channel 0 • On the rear package label • On the label on the back of your XpressRC NOTE: The XM Radio ID does not use the letters I, O, S, or F. 3 Activate your service: • Browse to http://activate.xmradio.com and follow the instructions. OR • Call 1 800 XM RADIO (1-800-967-2346). 4 When your service is activated, your XpressRC will receive all channels. This usually takes 10 to 15 minutes, but may take up to an hour. Your radio must remain on until activated. ActivationBefore you can listen to any of XM’s great channels, you must rst activate your XpressRC Using your XpressListening to XMEnter a channel 1 1 Turn the knob to scroll through the list of channels. 2 2 You’ll see the channel logo and current artist. In a few seconds, the current song title appears. TIP: You can change the display mode to show both the current channel and all channels. Refer to Changing the display on page 35. 3 3 Press the XM button to select a channel. View a categoryWith so many channels to choose from, XM Satellite Radio has organized them into cat- nd the ones that suit your taste. 1 1 To view a category, press < or >. 2 2 nd the channel you want. 3 Press the XM button TIP! y listen to each channel in the category, select Scan, then press the XM button TIP: You can congure XpressRC to automatically tune to the channel you scroll to. Refer to page 32 for instructions on how to eliminate the need to enter your selection. Preset your favorite channel You can assign up to 10 of your favorite channels to the number buttons so you can quickly access them. To assign a favorite channel to a button: 1 1 Tune to the desired channel. 2 2 3 3To listen to a favorite channel: 1 1 Be sure you are in Favorite Channels mode. Press fav until Favorite Channels appears in the title bar. Press and hold the number button you want to use for that channel.Be sure you are in Favorite Channels mode by pressing fav until Favorite Channels appears in the title bar. 2 2 Press the number button where the desired channel is programmed. TIP! To see your list of Favorite Channels, press < or >. Select a favorite and press the XM button to listen to that channel. Change the display modeYou can view multiple channels on the display to see what else is playing. Choose from: To change the mode, press display. TIP! When in split screen with the channel list, you can scroll through the list of channels, just like when it appears on the full screen. Press < or > to change categories. Press the XM button to select a channel. TIP! Press jump to change to the previous channel. split screen with previoustsil lennahc htiw neercs tilpslennahc tnerruc elgnisFCC Statement Please note that the power cable that has been supplied with your device is supplied with permanently attached ferrite beads. It is the responsibility of the user to use the power cable with the ferrite beads. can void the user’s authority to operate this device. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: • This device may not cause harmful interference. • This device must accept any interference received, including interference that may cause undesired operation. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the installation instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined more of the following measures: receiver is connected. • Consult the dealer or an experienced radio/TV technician for help. (neither portable nor permanent installation). Therefore, XM Satellite Radio cannot support this type of application or installation SA10316XM name and related logos are registered trademarks of XM Satellite Radio Inc. All other trademarks are the property of their respective owners.DPSS-07-E-XXXDelphi Corporation1441 West Long Lake RoadTroy, Michigan 48098-5090 U.S.A.1.877. GO.DELPHIwww.delphi.com Printed on Recycled Paper© 2007 Delphi Corporation. All rights reserved.XM9800012500XM- 9800 - 0125 - 00

Navigation menu