Sirius XM Radio XMXRC1 XM Satellite RX and FM TX User Manual RC quick guide ai

Download:
Mirror Download [FCC.gov]
Document ID	832273
Application ID	vjWe+yPcFG5G6q7LhwJcog==
Document Description	XpressRC Quick Guide
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	52.65kB (658097 bits)
Date Submitted	2007-08-22 00:00:00
Date Available	2007-08-22 00:00:00
Creation Date	2007-07-20 17:03:01
Producing Software	Acrobat Distiller 7.0.5 (Windows)
Document Lastmod	2007-07-23 10:27:34
Document Title	RC quick guide.ai
Document Creator	PScript5.dll Version 5.2.2
Document Author:	jvaias

60-Minute Replay Buttons
Pause and replay up to 60
minutes of live XM broadcast.
info
display
menu
mute
jump
fav
Display
Changes the way content is
viewed on the display.
Press the center of the XM button to make a selection
Press the edge of the knob to select display, jump, < or>
XM Button
Swivel Mount
Preparation Kit
channel and menu items, also
press and hold to save a song
to SongSaver or TuneSelect.
Remote Control
Left and Right Arrows
Search for channels by
category.
Swivel Mount
Press center button Toggle right
(XM button)
5-way Navigation
Knob
Previews channels; also selects
various menu options.
Car Power Adapter
Car Cradle
Vent Mount
Warnings
- When using this product it is always important to keep your eyes on the road and hands on the wheel.
Not doing so could result in personal injury, death, and/or damage to your XpressR Receiver,
accessories, and/or to your vehicle or other property.
Number Keys
Enter a channel
directly, select your
favorite channels, or
access songs saved
in SongSaver.
Info
Displays either your
personal stock or info
extras information.
Jump
Switches between
current channel and
previous channel.
Snap the mount onto the vent.
Swivel Mount
To remove, push the mount into the vent, then lift up.
CAUTION! The adhesive used with the swivel mount may make it difficult t o remove. Do not
install this mount on leather surfaces and make sure the air temperature is at least 60°F (15°C).
Plug the antenna into ANT IN on the cradle.
Plug the power adapter into DC IN on the cradle.
at surface for the mount. Make sure there is ample room
for the XM cradle and radio when installed.
Plug the audio adapter into AUDIO OUT on the cradle.
Clean the surface with the preparation kit and let it dry thoroughly.
• Use a mini audio cable (sold separately) if your vehicle has
an audio input jack.
Turn the swivel to accommodate the XM cradle and radio. Adjust the tension via
the center screw.
NOTE! If your car does not contain a cassette player or an audio input, you will
need to use either the XM SureConnect (sold separately) or the FM Direct
adapter (sold separately).
to adjust the tension of the
mount with a screwdriver.
To remove, carefully lift the adhesive pad with your fingers or a spoon. Warming the pad with a
hairdryer for several minutes will help soften the adhesive.
DC IN
AUDIO OUT
XpressRC Car Cradle
Insert the cradle into the mount.
Insert your XpressRC into the cradle.
You can adjust this screw
ANT IN
• Use the Cassette Adapter if your vehicle has a built-in cassette player.
IMPORTANT! Let the adhesive cure for 24 hours before attaching the XM
cradle and radio to the mount.
You can reinstall the swivel mount using the extra adhesive pad.
Step 3: Connect your XpressRC.
the adhesive liner. Position, press, and hold the swivel mount
in place for 30 seconds.
t your vent.
TIP! Always be careful to include enough slack in your cable to accommodate
open doors or trunk lids. Use things typically found around the home, like
electrical tape, to secure cables in areas so that hinges do not pinch the cable
with the door. Hide any excess cable in the trim.
Magnet
Locate a vent with horizontal slats
sturdy enough to hold your XM cradle and radio.
If you placed the XM antenna on the rear of
the vehicle, route the cable under the
weather seal of the rear window. Route it
into the trunk and through any existing
wire passages or cargo passages to the rear
passenger compartment. Tuck the cable
under the door jam trim or under the
carpet to the radio as shown.
The XM antenna contains a strong magnet which
will stick to any metal parts of your vehicle.
Installing the swivel mount
Vent Mount
Toggle down
1 Choose the best location for your XM antenna considering your own personal situation.
Pay particular attention to any accessories that you may have like luggage racks and
how frequently you may use them.
Fav
Selects between direct
channel entry, favorite
channels, and SongSaver
mode.
Installing the vent mount
Toggle up
Vehicle Installation
- XpressR should be placed in your vehicle where it will not interfere with the function of safety features,
e.g., deployment of airbags. Failure to correctly place XpressR may result in injury to you or others if
the unit becomes detached during an accident and/or obstructs the deployment of an airbag.
You can use either the vent mount or the swivel
mount for your XpressRC depending on your
particular situation.
Toggle left
Step 1: Mount the XM Antenna
Menu
Access advanced features
Step 2: Install the vent or swivel mount
If you placed the XM antenna on the front of
the vehicle, route the cable across the top of
the windshield. Gently pry up the rubber
weather seal and tuck the cable underneath.
Follow the weather seal down to the door
jam. Tuck the cable into the door jam and up
to the dash or under the carpet to the car
cradle as shown.
Turn the knob to scroll through a list.
Power Button
Cassette Adapter
XpressRC
XM Car Antenna
5-way navigation knob
XpressRC functions
What’s in the box
• XM SureConnect (sold separately): You can listen to your XpressRC through your
car stereo by using XpressRC’s built-in FM modulator and the XM SureConnect.
nd an unused FM frequency on the stereo and set your XpressRC
to transmit on that same frequency. Refer to Set the FM frequency page in your
user guide for more information
• FM Direct Adapter (sold separately): This option directly connects the XpressRC
to your car’s audio system and antenna. A professional installation is recommended
if you choose to use this method
Power Adapter
XM Antenna
Cassette Adapter
9
Activation
Step 4: Turn on your XpressRC.
Insert the cassette adapter.
Turn on your XpressRC.
11
Using your Xpress
Listening to XM
Before you can listen to any of XM’s great channels, you must first activate your XpressRC
Turn on your car radio.
10
Enter a channel
RC
Make sure your Xpress is properly installed and receiving the XM
signal so that you can hear the audio on channel 1.
nd it:
Turn the knob to scroll through the list of channels.
You’ll see the channel logo and current artist. In a few seconds,
the current song title appears.
• On XM channel 0
• On the rear package label
TIP: You can change the display mode to show both the current channel
and all channels. Refer to Changing the display on page 35.
• On the label on the back of your XpressRC
NOTE: The XM Radio ID does not use the letters I, O, S, or F.
fav
Press the XM button to select a channel.
TIP: You can configure XpressRC to automatically tune to the channel you scroll to. Refer
to page 32 for instructions on how to eliminate the need to enter your selection.
Activate your service:
• Browse to http://activate.xmradio.com and follow the instructions.
View a category
OR
With so many channels to choose from, XM Satellite Radio has organized them into catnd the ones that suit your taste.
When your service is activated, your XpressRC will receive all channels.
This usually takes 10 to 15 minutes, but may take up to an hour. Your radio
must remain on until activated.
NOTE: If you are using the XM SureConnect or the FM Direct adapter, refer to
on page xxx for information.
To view a category, press < or >.
Press the XM button
TIP!
12
Quick Guide
nd the channel you want.
y listen to each channel in the category, select Scan, then press the XM button
13
14
XM- 9 8 0 0 - 0 1 2 5 - 0 0
DPSS-07-E-XXX
• Call 1 800 XM RADIO (1-800-967-2346).
NOTE: You may experience a two-second delay and hear a short beep while your
XpressRC powers up. If you press the power button during these two seconds,
you will see a Please Wait message.
15
Printed on Recycled Paper
© 2007 Delphi Corporation. All rights reserved.
Change the display mode
FCC Statement
You can assign up to 10 of your favorite channels to the number buttons so you can
quickly access them.
You can view multiple channels on the display to see what else is playing.
Please note that the power cable that has been supplied with your device is supplied with permanently
attached ferrite beads. It is the responsibility of the user to use the power cable with the ferrite beads.
XM name and related logos are registered
trademarks of XM Satellite Radio Inc. All
other trademarks are the property of their
respective owners.
Preset your favorite channel
Choose from:
www.delphi.com
can void the user’s authority to operate this device. This device complies with Part 15 of the FCC Rules.
Operation is subject to the following two conditions:
Be sure you are in Favorite Channels
mode. Press fav until Favorite
Channels appears in the title bar.
3 Press and hold the number button
you want to use for that channel.
To listen to a favorite channel:
Be sure you are in Favorite Channels
mode by pressing fav until Favorite
Channels appears in the title bar.
2 Press the number button where the desired channel is programmed.
TIP! To see your list of Favorite Channels, press < or >. Select a favorite and press the XM button
to listen to that channel.
• This device may not cause harmful interference.
• This device must accept any interference received, including interference that may cause undesired
operation.
single current channel
split screen with channel list
split screen with previous
To change the mode, press display.
TIP! When in split screen with the channel list, you can scroll through the list
of channels, just like when it appears on the full screen. Press < or > to change
categories. Press the XM button to select a channel.
This equipment has been tested and found to comply with the limits for a Class B digital device,
pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against
harmful interference in a residential installation.
This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in
accordance with the installation instructions, may cause harmful interference to radio communications.
However, there is no guarantee that interference will not occur in a particular installation. If this
equipment does cause harmful interference to radio or television reception, which can be determined
more of the following measures:
TIP! Press jump to change to the previous channel.
receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.
(neither portable nor permanent installation). Therefore, XM Satellite Radio cannot support this type of
application or installation
XM9 8 0 0 0 1 2 5 0 0
SA10316
Tune to the desired channel.
Delphi Corporation
1441 West Long Lake Road
Troy, Michigan 48098-5090 U.S.A.
1.877. GO.DELPHI
To assign a favorite channel to a button:

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.6
Linearized                      : No
XMP Toolkit                     : 3.1-702
Producer                        : Acrobat Distiller 7.0.5 (Windows)
Creator Tool                    : PScript5.dll Version 5.2.2
Modify Date                     : 2007:07:23 10:27:34-04:00
Create Date                     : 2007:07:20 17:03:01-04:00
Metadata Date                   : 2007:07:23 10:27:34-04:00
Format                          : application/pdf
Title                           : RC quick guide.ai
Creator                         : jvaias
Document ID                     : uuid:9a1c70b2-525e-453c-bc07-5c202690b8a6
Instance ID                     : uuid:c0ee0b9a-c12d-4394-8b6f-46cda09ab6fb
Has XFA                         : No
Page Count                      : 2
Author                          : jvaias

EXIF Metadata provided by EXIF.tools